aboutsummaryrefslogtreecommitdiff
path: root/design
diff options
context:
space:
mode:
Diffstat (limited to 'design')
-rw-r--r--design/embedded_bram_slave.v43
-rw-r--r--design/interface_wrapper.v8
-rw-r--r--design/miscellaneous_slave.v34
-rw-r--r--design/spi_slave.v87
-rw-r--r--design/sram_slave.v35
-rw-r--r--design/stack_machine.v76
-rw-r--r--design/vga.v91
-rw-r--r--design/wrapped_stack_machine.v79
8 files changed, 439 insertions, 14 deletions
diff --git a/design/embedded_bram_slave.v b/design/embedded_bram_slave.v
index 519c772..c6da4c6 100644
--- a/design/embedded_bram_slave.v
+++ b/design/embedded_bram_slave.v
@@ -2,6 +2,49 @@
* This is very similar to design/slave.v, although with 1 important difference
* - it's meant to be synthesizable (and use iCE40HX8K's embedded RAM).
*/
+
+/*
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | (MEMORY_BLOCKS*256)x16-bit memory core |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | SLAVE, pipelined READ/WRITE |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | $clog2(MEMORY_BLOCKS) + 8 bits |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE (determined by memory primitive, |
+ * | | about 100 MHz in case of iCE40HX8K) |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | ACK_O | ACK_O |
+ * | | ADR_I | ADR_I() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | DAT_I | DAT_I() |
+ * | WISHBONE signals | DAT_O | DAT_O() |
+ * | | STB_I | STB_I |
+ * | | WE_I | WE_I |
+ * | | RST_I | RST_I |
+ * | | STALL_O | STALL_O |
+ * |---------------------------------+-----------------------------------------|
+ * | | Circuit assumes the use of synchronous |
+ * | Special requirements | RAM with asynchronour read |
+ * | | inreffable by synthesis software. |
+ * |---------------------------------+-----------------------------------------|
+ * | | The MEMORY_BLOCKS parameter can be used |
+ * | | to decide the size of the memory. |
+ * | Additional information | Single block contains 256 16-bit |
+ * | | words. Address width changes |
+ * | | accordingly to memory size. |
+ */
+
`default_nettype none
`define ADDR_WIDTH ($clog2(MEMORY_BLOCKS) + 8)
diff --git a/design/interface_wrapper.v b/design/interface_wrapper.v
index ada4a3f..eb708d6 100644
--- a/design/interface_wrapper.v
+++ b/design/interface_wrapper.v
@@ -1,7 +1,11 @@
/*
- * For now, this wrapper ignores SEL_O signals - we'll update it for
- * byte-granular accesses later.
+ * This module transforms a Wishbone pipelined MASTER interface with 32-bit
+ * data port and 8-bit granularity into one with 16-bit data port and 16-bit
+ * granularity. It's just a wrapper, it is not considered a Wishbone SLAVE nor
+ * MASTER by itself (although it could be presented that way). See Wishbone
+ * datasheets of data interfaces in stack_machine.v and wrapped_stack_machine.v.
*/
+
`default_nettype none
module interface_wrapper
diff --git a/design/miscellaneous_slave.v b/design/miscellaneous_slave.v
index 7274db7..0be33f2 100644
--- a/design/miscellaneous_slave.v
+++ b/design/miscellaneous_slave.v
@@ -1,5 +1,36 @@
/*
- * This wb slave controls buttons, LEDs (only one LED, actually) and timer.
+ * This wb slave controls a button, a LED and timer.
+ *
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | miscellaneous peripherals core |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | SLAVE, pipelined READ/WRITE |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | 3 |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | ACK_O | ACK_O |
+ * | | ADR_I | ADR_I() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | DAT_I | DAT_I() |
+ * | WISHBONE signals | DAT_O | DAT_O() |
+ * | | STB_I | STB_I |
+ * | | WE_I | WE_I |
+ * | | RST_I | RST_I |
+ * | | STALL_O | STALL_O |
+ * |---------------------------------+-----------------------------------------|
+ * | Special requirements | NONE |
*
* Registers and their addresses:
* button2 clicks - address 1
@@ -28,6 +59,7 @@
* very short or very long times, it might be justifiable to only read one half
* of the timer.
*/
+
`default_nettype none
module miscellaneous_slave
diff --git a/design/spi_slave.v b/design/spi_slave.v
index a53d9d2..5c671aa 100644
--- a/design/spi_slave.v
+++ b/design/spi_slave.v
@@ -1,3 +1,87 @@
+/*
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | SPI master core |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | SLAVE, pipelined READ/WRITE |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | $clog2(MEMORY_BLOCKS + 1) + 8 bits |
+ * |---------------------------------+-----------------------------------------|
+ * | | NONE (determined by SPI slave devices |
+ * | Clock frequency constraints | and connections to them and also by |
+ * | | memory primitive inferred) |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | ACK_O | ACK_O |
+ * | | ADR_I | ADR_I() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | DAT_I | DAT_I() |
+ * | WISHBONE signals | DAT_O | DAT_O() |
+ * | | STB_I | STB_I |
+ * | | WE_I | WE_I |
+ * | | RST_I | RST_I |
+ * | | STALL_O | STALL_O |
+ * |---------------------------------+-----------------------------------------|
+ * | | Circuit assumes the use of synchronous |
+ * | Special requirements | RAM with asynchronour read |
+ * | | inreffable by synthesis software. |
+ * |---------------------------------+-----------------------------------------|
+ * | | The MEMORY_BLOCKS parameter can be used |
+ * | | to decide the size of module's data |
+ * | | transfer memory. SPI operations are |
+ * | | performed as follows: |
+ * | Additional information | * Bytes to send through MOSI are |
+ * | | written at the beginning of data |
+ * | | transfer memory. |
+ * | | * Number of bytes to send is |
+ * | | written to the "bytes_to_output" |
+ * | | register. |
+ * | | * Number of bytes to receive from |
+ * | | MISO afterwards is written to the |
+ * | | "bytes_to_recive" register. |
+ * | | * Operation is started by writing |
+ * | | any value to the "operating" |
+ * | | register. |
+ * | | Also see the memory map below. |
+ * | | The "operating" register can be |
+ * | | read at any time to check if an |
+ * | | SPI operation has finished. It |
+ * | | reads a non-zero value if and only |
+ * | | if the SPI operation is still |
+ * | | occuring. Register writes are not |
+ * | | possible during SPI operation. Any |
+ * | | such write will be stalled and will |
+ * | | complete after SPI operation |
+ * | | finishes. This behavior can be |
+ * | | exploited to wait for operation |
+ * | | completion. |
+ */
+
+/*
+ * The memory map is as follows:
+ * h000 - (h100*MEMORY_BLOCKS)-1 - data transfer memory
+ * h100*MEMORY_BLOCKS - "bytes_to_output" reg
+ * (h100*MEMORY_BLOCKS)+1 - "bytes_to_receive" reg
+ * (h100*MEMORY_BLOCKS)+2 - (h100*MEMORY_BLOCKS)+3 - "operating" reg
+ *
+ * If MEMORY_BLOCKS is set to 1, this results in the following memory map:
+ * h000 - h0FF - data transfer memory
+ * h100 - "bytes_to_output" reg
+ * h101 - "bytes_to_receive" reg
+ * h102 - h103 - "operating" reg
+ *
+ * Accessing any half of the "operating" reg results in the same behavior.
+ * Accessing higher addresses than specified results in UNDEFINED behavior.
+ */
+
`default_nettype none
`define ADDR_WIDTH ($clog2(MEMORY_BLOCKS + 1) + 8)
@@ -102,7 +186,8 @@ module spi_slave
wire wb_mwrite_completes;
wire wb_rwrite_completes;
- assign wb_mread_completes = !(spi_read_memory[0] || initial_spi_read_memory) &&
+ assign wb_mread_completes = !(spi_read_memory[0] ||
+ initial_spi_read_memory) &&
wb_read_memory[0];
assign wb_rread_completes = wb_read_regs; /* can always read immediately */
diff --git a/design/sram_slave.v b/design/sram_slave.v
index 718ef8a..420626d 100644
--- a/design/sram_slave.v
+++ b/design/sram_slave.v
@@ -1,3 +1,38 @@
+/*
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | 262144x16-bit memory core (512 KB) |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | SLAVE, pipelined READ/WRITE |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | 18-bit |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE (determined by memory primitive, |
+ * | | about 100 MHz if using K6R4016V1D) |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | ACK_O | ACK_O |
+ * | | ADR_I | ADR_I() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | DAT_I | DAT_I() |
+ * | WISHBONE signals | DAT_O | DAT_O() |
+ * | | STB_I | STB_I |
+ * | | WE_I | WE_I |
+ * | | RST_I | RST_I |
+ * | | STALL_O | STALL_O |
+ * |---------------------------------+-----------------------------------------|
+ * | Special requirements | Circuit assumes the use of asynchronous |
+ * | | RAM primitive, e.g. K6R4016V1D. |
+ */
+
`default_nettype none
module sram_slave
diff --git a/design/stack_machine.v b/design/stack_machine.v
index 13e55c1..01ccb74 100644
--- a/design/stack_machine.v
+++ b/design/stack_machine.v
@@ -2,6 +2,81 @@
`include "messages.vh"
+/*
+ * This module provides 2 Wishbone MASTER interfaces described below.
+ * CLK_I and RST_I signals are shared between those interfaces.
+ * Two interfaces can, but don't have to, be made to access the same memory map.
+ * Instructions interface never performs writes (its WE_O is hardwired to low).
+ *
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | stack machine core data interface |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | MASTER, pipelined READ/WRITE |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 32-bit |
+ * | Data port, granularity | 8-bit |
+ * | Data port, maximum operand size | 32-bit |
+ * | Data transfer ordering | Little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | 21-bit |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | D_ACK_I | ACK_I |
+ * | | D_ADR_O | ADR_O() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | D_DAT_I | DAT_I() |
+ * | WISHBONE signals | D_DAT_O | DAT_O() |
+ * | | D_SEL_O | SEL_O |
+ * | | D_STB_O | STB_O |
+ * | | D_CYC_O | CYC_O |
+ * | | D_WE_O | WE_O |
+ * | | RST_I | RST_I |
+ * | | D_STALL_I | STALL_I |
+ * |---------------------------------+-----------------------------------------|
+ * | Special requirements | NONE |
+ *
+ *
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | stack machine core instructions |
+ * | | interface |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | MASTER, pipelined READ |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | 20-bit |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | I_ACK_I | ACK_I |
+ * | | I_ADR_O | ADR_O() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | I_DAT_I | DAT_I() |
+ * | WISHBONE signals | I_DAT_O | DAT_O() |
+ * | | I_SEL_O | SEL_O |
+ * | | I_STB_O | STB_O |
+ * | | I_CYC_O | CYC_O |
+ * | | I_WE_O | WE_O |
+ * | | RST_I | RST_I |
+ * | | I_STALL_I | STALL_I |
+ * |---------------------------------+-----------------------------------------|
+ * | Special requirements | NONE |
+ */
+
module stack_machine_new
(
/* Those 2 are supposed to be common for both wishbone interfaces */
@@ -20,7 +95,6 @@ module stack_machine_new
/* Data interface */
input wire D_ACK_I,
- input wire D_ERR_I, /* We'll start using it soon */
output reg [20:0] D_ADR_O,
input wire [31:0] D_DAT_I,
output reg [31:0] D_DAT_O,
diff --git a/design/vga.v b/design/vga.v
index e69907c..5e42866 100644
--- a/design/vga.v
+++ b/design/vga.v
@@ -1,9 +1,92 @@
+/*
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | VGA signal generator (640x480@60Hz) |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | SLAVE, pipelined READ/WRITE |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | 11-bit |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE (determined by memory primitive, |
+ * | | about 100 MHz in case of iCE40HX8K) |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | ACK_O | ACK_O |
+ * | | ADR_I | ADR_I() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | DAT_I | DAT_I() |
+ * | WISHBONE signals | DAT_O | DAT_O() |
+ * | | STB_I | STB_I |
+ * | | WE_I | WE_I |
+ * | | RST_I | RST_I |
+ * | | STALL_O | STALL_O |
+ * |---------------------------------+-----------------------------------------|
+ * | | Circuit assumes the use of synchronous |
+ * | Special requirements | RAM with asynchronour read |
+ * | | inreffable by synthesis software. |
+ * |---------------------------------+-----------------------------------------|
+ * | | Module provides a simple text mode, |
+ * | | that can be used to display 30 lines of |
+ * | | 80 characters each. Module can be used |
+ * | | as follows: |
+ * | Additional information | * ASCII values of characters to |
+ * | | display should be written to text |
+ * | | mode memory. |
+ * | | * A non-zero value should be |
+ * | | written to the "power-on" |
+ * | | register to start generating VGA |
+ * | | signal. |
+ * | | * Zero should be written to the |
+ * | | "power-on" register to stop |
+ * | | generating VGA output. |
+ * | | Also see the memory map below. |
+ * | | The "power-on" register can be |
+ * | | read at any time to check if VGA |
+ * | | output is being generated. It reads |
+ * | | a non-zero value if module is |
+ * | | operating and zero otherwise. |
+ * | | Each byte of the text mode memory |
+ * | | corresponds to one character on |
+ * | | video display. They are arranged by |
+ * | | rows, from up to down. I.e. writing |
+ * | | value 65 to the first 2 bytes of |
+ * | | text video memory shall result in |
+ * | | character "A" being printed in 2 |
+ * | | leftmost fields of the topmost line |
+ * | | of the display. Writing a byte |
+ * | | value outside ASCII range shall |
+ * | | result in a replacement character |
+ * | | being written. Text mode memory is |
+ * | | 2560 bytes big. The last 160 bytes |
+ * | | are not used by video display and |
+ * | | don't serve any special purpose. |
+ * | | The font used for ASCII characters |
+ * | | is defined in an external file and |
+ * | | can be substituted. |
+ */
+
+/*
+ * The memory map is as follows:
+ * h000 - h4FF - VGA text memory
+ * h500 - VGA power-on reg
+ *
+ * Accessing higher addresses than specified results in UNDEFINED behavior.
+ */
+
`default_nettype none
- module vga
- #(
- parameter FONT_FILE = "font.mem"
- )
+module vga
+ #(
+ parameter FONT_FILE = "font.mem"
+ )
(
output wire ACK_O,
input wire CLK_I,
diff --git a/design/wrapped_stack_machine.v b/design/wrapped_stack_machine.v
index 984b641..2c0244a 100644
--- a/design/wrapped_stack_machine.v
+++ b/design/wrapped_stack_machine.v
@@ -1,7 +1,79 @@
/*
* This is a version of stack machine with 16-bit data ports
- * on *both* wishbone interfaces (data interface is wrapped).
+ * on *both* Wishbone interfaces (data interface is wrapped).
+ * CLK_I and RST_I signals are shared between interfaces.
+ * Two interfaces can, but don't have to, be made to access the same memory map.
+ * Instructions interface never performs writes (its WE_O is hardwired to low).
+ *
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | stack machine core data interface |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | MASTER, pipelined READ/WRITE |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | 20-bit |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | D_ACK_I | ACK_I |
+ * | | D_ADR_O | ADR_O() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | D_DAT_I | DAT_I() |
+ * | WISHBONE signals | D_DAT_O | DAT_O() |
+ * | | D_SEL_O | SEL_O |
+ * | | D_STB_O | STB_O |
+ * | | D_CYC_O | CYC_O |
+ * | | D_WE_O | WE_O |
+ * | | RST_I | RST_I |
+ * | | D_STALL_I | STALL_I |
+ * |---------------------------------+-----------------------------------------|
+ * | Special requirements | NONE |
+ *
+ *
+ * | *WISHBONE DATASHEET* |
+ * |---------------------------------------------------------------------------|
+ * | *Description* | *Specification* |
+ * |---------------------------------+-----------------------------------------|
+ * | General description | stack machine core instructions |
+ * | | interface |
+ * |---------------------------------+-----------------------------------------|
+ * | Supported cycles | MASTER, pipelined READ |
+ * |---------------------------------+-----------------------------------------|
+ * | Data port, size | 16-bit |
+ * | Data port, granularity | 16-bit |
+ * | Data port, maximum operand size | 16-bit |
+ * | Data transfer ordering | Big endian and/or little endian |
+ * | Data transfer ordering | Undefined |
+ * | Address port, size | 20-bit |
+ * |---------------------------------+-----------------------------------------|
+ * | Clock frequency constraints | NONE |
+ * |---------------------------------+-----------------------------------------|
+ * | | *Signal name* | *WISHBONE Equiv.* |
+ * | |------------------+----------------------|
+ * | | I_ACK_I | ACK_I |
+ * | | I_ADR_O | ADR_O() |
+ * | Supported signal list and cross | CLK_I | CLK_I |
+ * | reference to equivalent | I_DAT_I | DAT_I() |
+ * | WISHBONE signals | I_DAT_O | DAT_O() |
+ * | | I_SEL_O | SEL_O |
+ * | | I_STB_O | STB_O |
+ * | | I_CYC_O | CYC_O |
+ * | | I_WE_O | WE_O |
+ * | | RST_I | RST_I |
+ * | | I_STALL_I | STALL_I |
+ * |---------------------------------+-----------------------------------------|
+ * | Special requirements | NONE |
*/
+
`default_nettype none
module wrapped_stack_machine
@@ -35,11 +107,10 @@ module wrapped_stack_machine
);
wire D_RAW_ACK_I;
- wire D_RAW_ERR_I; /* Not used yet, always low */
wire [20:0] D_RAW_ADR_O;
wire [31:0] D_RAW_DAT_I;
wire [31:0] D_RAW_DAT_O;
- wire [3:0] D_RAW_SEL_O; /* Not used yet, always 4'hF */
+ wire [3:0] D_RAW_SEL_O;
wire D_RAW_STB_O;
wire D_RAW_CYC_O;
wire D_RAW_WE_O;
@@ -62,7 +133,6 @@ module wrapped_stack_machine
/* Data interface */
.D_ACK_I(D_RAW_ACK_I),
- .D_ERR_I(D_RAW_ERR_I),
.D_ADR_O(D_RAW_ADR_O),
.D_DAT_I(D_RAW_DAT_I),
.D_DAT_O(D_RAW_DAT_O),
@@ -81,7 +151,6 @@ module wrapped_stack_machine
.RST_I(RST_I),
.RAW_ACK_I(D_RAW_ACK_I),
- .RAW_ERR_I(D_RAW_ERR_I),
.RAW_ADR_O(D_RAW_ADR_O),
.RAW_DAT_I(D_RAW_DAT_I),
.RAW_DAT_O(D_RAW_DAT_O),