add bench for wishbone sram wrapper

1 files changed, 101 insertions, 0 deletions

diff --git a/models/sram.v b/models/sram.v
new file mode 100644
index 0000000..5d1c707
--- /dev/null
+++ b/models/sram.v
@@ -0,0 +1,101 @@
+`default_nettype none
+`timescale 1ns/1ns
+
+`include "messages.vh"
+
+`ifndef SIMULATION
+ `error_SIMULATION_not_defined
+; /* Cause syntax error */
+`endif
+
+module K6R4016V1D_TC10_sram
+  (
+   input wire [17:0] sram_addr,
+   inout wire [15:0] sram_io,
+
+   input wire 	     sram_cs_not,
+   input wire 	     sram_oe_not,
+   input wire 	     sram_we_not
+   );
+
+   reg [15:0] 	     memory [2 ** 18 - 1 : 0];
+
+   wire 	     enabled;
+   wire 	     read;
+   wire 	     write;
+
+   assign enabled = !sram_cs_not;
+   assign read = enabled && !sram_oe_not && sram_we_not;
+   assign write = enabled && !sram_we_not;
+
+   integer 	     enabled_time;
+   integer 	     read_time;
+   integer 	     write_time;
+
+   reg [17:0] 	     addr_last;
+
+   wire 	     addr_unchanged;
+   assign addr_unchanged = addr_last == sram_addr;
+   integer 	     addr_unchanged_time;
+
+   initial begin
+      enabled_time <= 0;
+      read_time <= 0;
+      write_time <= 0;
+
+      addr_unchanged_time <= 0;
+   end
+
+   reg [15:0] 	     output_data;
+   reg 		     outputting;
+   assign sram_io = outputting ? output_data : 16'hZZZZ;
+
+   always #1 begin
+      enabled_time <= enabled ? enabled_time + 1 : 0;
+      write_time <= write ? write_time + 1 : 0;
+      read_time <= read ? read_time + 1 : 0;
+
+      addr_last <= sram_addr;
+
+      if (!read && read_time > 0 && read_time < 8)
+	`MSG(("SRAM: error: output enable signal active for only %dns",
+	      read_time));
+
+      if (!write && write_time > 0 && write_time < 9)
+	`MSG(("SRAM: error: write enable signal active for only %dns",
+	      write_time));
+
+      if (((read && read_time) || (write && write_time)) && addr_unchanged)
+	addr_unchanged_time <= addr_unchanged_time + 1;
+      else
+	addr_unchanged_time <= 0;
+
+      if (write && write_time) begin
+	 if (addr_unchanged) begin
+	    if (write_time >= 9 && addr_unchanged_time >= 8) begin
+	       memory[sram_addr] <= sram_io;
+
+	       if (write_time == 9)
+		 `DBG(("SRAM: write of h%x at h%x", sram_io, sram_addr));
+	    end
+	 end else begin
+	    `MSG(("SRAM: error: address changed during write"));
+	 end
+      end
+
+      if (read && read_time >= 8) begin
+	 outputting <= 1;
+
+	 if (addr_unchanged_time >= 7) begin
+	    output_data <= memory[sram_addr];
+
+	    if (addr_unchanged_time == 7)
+	      `DBG(("SRAM: read of h%x at h%x", memory[sram_addr], sram_addr));
+	 end else begin
+	    output_data <= 16'hXXXX;
+	 end
+      end else begin
+	 outputting <= 0;
+      end
+   end // always #1
+endmodule // K6R4016V1D_TC10_sram