rename intercon to slave_dispatcher (soc module will remporarily stop working from this commit on)

1 files changed, 0 insertions, 142 deletions

diff --git a/design/intercon.v b/design/intercon.v
deleted file mode 100644
index bf908af..0000000
--- a/design/intercon.v
+++ /dev/null
@@ -1,142 +0,0 @@
-`default_nettype none
-
-module intercon
-  (
-   input wire 	      CLK,
-   input wire 	      RST,
-
-   input wire 	      S0_ACK_O,
-   output wire 	      S0_CLK_I,
-   output wire [17:0] S0_ADR_I,
-   output wire [15:0] S0_DAT_I,
-   input wire [15:0]  S0_DAT_O,
-   output wire 	      S0_RST_I,
-   output wire 	      S0_STB_I,
-   output wire 	      S0_WE_I,
-   input wire 	      S0_STALL_O,
-
-   input wire 	      S1_ACK_O,
-   output wire 	      S1_CLK_I,
-   output wire [17:0] S1_ADR_I,
-   output wire [15:0] S1_DAT_I,
-   input wire [15:0]  S1_DAT_O,
-   output wire 	      S1_RST_I,
-   output wire 	      S1_STB_I,
-   output wire 	      S1_WE_I,
-   input wire 	      S1_STALL_O,
-
-   input wire 	      S2_ACK_O,
-   output wire 	      S2_CLK_I,
-   output wire [17:0] S2_ADR_I,
-   output wire [15:0] S2_DAT_I,
-   input wire [15:0]  S2_DAT_O,
-   output wire 	      S2_RST_I,
-   output wire 	      S2_STB_I,
-   output wire 	      S2_WE_I,
-   input wire 	      S2_STALL_O,
-
-   input wire 	      S3_ACK_O,
-   output wire 	      S3_CLK_I,
-   output wire [17:0] S3_ADR_I,
-   output wire [15:0] S3_DAT_I,
-   input wire [15:0]  S3_DAT_O,
-   output wire 	      S3_RST_I,
-   output wire 	      S3_STB_I,
-   output wire 	      S3_WE_I,
-   input wire 	      S3_STALL_O,
-
-   output wire 	      M_ACK_I,
-   output wire 	      M_CLK_I,
-   input wire [19:0]  M_ADR_O,
-   input wire [15:0]  M_DAT_O,
-   output wire [15:0] M_DAT_I,
-   output wire 	      M_RST_I,
-   input wire 	      M_STB_O,
-   input wire 	      M_CYC_O,
-   input wire 	      M_WE_O,
-   output wire 	      M_STALL_I
-   );
-
-   wire [0:3] 	      acks;
-   wire [0:3] 	      stalls;
-   wire [15:0] 	      datas [0:3];
-   assign acks = {S0_ACK_O, S1_ACK_O, S2_ACK_O, S3_ACK_O};
-   assign stalls = {S0_STALL_O, S1_STALL_O, S2_STALL_O, S3_STALL_O};
-   assign datas[0] = S0_DAT_O;
-   assign datas[1] = S1_DAT_O;
-   assign datas[2] = S2_DAT_O;
-   assign datas[3] = S3_DAT_O;
-
-   reg [1:0] 	      commands_awaiting;
-   reg [1:0] 	      slave_last_accessed;
-
-   wire 	      operation_requested;
-   wire 	      working;
-   wire [1:0] 	      slave_accessed;
-   wire 	      slave_switch; 
-   wire [1:0] 	      commands_awaiting_next_tick;
-   assign operation_requested = M_STB_O && M_CYC_O;
-   assign working = commands_awaiting || operation_requested;
-   assign slave_accessed = commands_awaiting ? slave_last_accessed :
-			   M_ADR_O[19:18];
-   assign M_ACK_I = acks[slave_accessed] && working;
-   assign M_DAT_I = datas[slave_accessed];
-   assign slave_switch = slave_accessed != M_ADR_O[19:18];
-   assign M_STALL_I = stalls[slave_accessed] || slave_switch ||
-		      (commands_awaiting == 3 && !M_ACK_I);
-   assign commands_awaiting_next_tick
-     = commands_awaiting - M_ACK_I + (operation_requested && !M_STALL_I);
-
-`ifdef SIMULATION
-   /* anything could be latched here, this is just to avoid undefined values */
-   initial begin
-      slave_last_accessed <= 0;
-      commands_awaiting <= 2; /* It is supposed to be driven low by RST */
-   end
-`endif
-
-   always @ (posedge CLK) begin
-      slave_last_accessed <= slave_accessed;
-
-      if (RST)
-	commands_awaiting <= 0;
-      else
-	commands_awaiting <= commands_awaiting_next_tick;
-   end
-
-   assign S0_CLK_I = CLK;
-   assign S1_CLK_I = CLK;
-   assign S2_CLK_I = CLK;
-   assign S3_CLK_I = CLK;
-   assign M_CLK_I = CLK;
-
-   assign S0_RST_I = RST;
-   assign S1_RST_I = RST;
-   assign S2_RST_I = RST;
-   assign S3_RST_I = RST;
-   assign M_RST_I = RST;
-
-   assign S0_ADR_I = M_ADR_O[17:0];
-   assign S1_ADR_I = M_ADR_O[17:0];
-   assign S2_ADR_I = M_ADR_O[17:0];
-   assign S3_ADR_I = M_ADR_O[17:0];
-
-   assign S0_DAT_I = M_DAT_O;
-   assign S1_DAT_I = M_DAT_O;
-   assign S2_DAT_I = M_DAT_O;
-   assign S3_DAT_I = M_DAT_O;
-
-   wire pass_strobe;
-   assign pass_strobe = operation_requested && !slave_switch &&
-			(commands_awaiting != 3 || M_ACK_I);
-
-   assign S0_STB_I = slave_accessed == 0 && pass_strobe;
-   assign S1_STB_I = slave_accessed == 1 && pass_strobe;
-   assign S2_STB_I = slave_accessed == 2 && pass_strobe;
-   assign S3_STB_I = slave_accessed == 3 && pass_strobe;
-
-   assign S0_WE_I = M_WE_O;
-   assign S1_WE_I = M_WE_O;
-   assign S2_WE_I = M_WE_O;
-   assign S3_WE_I = M_WE_O;
-endmodule // intercon