initial/final commitHEADmaster

1 files changed, 254 insertions, 0 deletions

diff --git a/openssl-1.1.0h/crypto/bn/asm/via-mont.pl b/openssl-1.1.0h/crypto/bn/asm/via-mont.pl
new file mode 100644
index 0000000..9f81bc8
--- /dev/null
+++ b/openssl-1.1.0h/crypto/bn/asm/via-mont.pl
@@ -0,0 +1,254 @@
+#! /usr/bin/env perl
+# Copyright 2006-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# Wrapper around 'rep montmul', VIA-specific instruction accessing
+# PadLock Montgomery Multiplier. The wrapper is designed as drop-in
+# replacement for OpenSSL bn_mul_mont [first implemented in 0.9.9].
+#
+# Below are interleaved outputs from 'openssl speed rsa dsa' for 4
+# different software configurations on 1.5GHz VIA Esther processor.
+# Lines marked with "software integer" denote performance of hand-
+# coded integer-only assembler found in OpenSSL 0.9.7. "Software SSE2"
+# refers to hand-coded SSE2 Montgomery multiplication procedure found
+# OpenSSL 0.9.9. "Hardware VIA SDK" refers to padlock_pmm routine from
+# Padlock SDK 2.0.1 available for download from VIA, which naturally
+# utilizes the magic 'repz montmul' instruction. And finally "hardware
+# this" refers to *this* implementation which also uses 'repz montmul'
+#
+#                   sign    verify    sign/s verify/s
+# rsa  512 bits 0.001720s 0.000140s    581.4   7149.7	software integer
+# rsa  512 bits 0.000690s 0.000086s   1450.3  11606.0	software SSE2
+# rsa  512 bits 0.006136s 0.000201s    163.0   4974.5	hardware VIA SDK
+# rsa  512 bits 0.000712s 0.000050s   1404.9  19858.5	hardware this
+#
+# rsa 1024 bits 0.008518s 0.000413s    117.4   2420.8	software integer
+# rsa 1024 bits 0.004275s 0.000277s    233.9   3609.7	software SSE2
+# rsa 1024 bits 0.012136s 0.000260s     82.4   3844.5	hardware VIA SDK
+# rsa 1024 bits 0.002522s 0.000116s    396.5   8650.9	hardware this
+#
+# rsa 2048 bits 0.050101s 0.001371s     20.0    729.6	software integer
+# rsa 2048 bits 0.030273s 0.001008s     33.0    991.9	software SSE2
+# rsa 2048 bits 0.030833s 0.000976s     32.4   1025.1	hardware VIA SDK
+# rsa 2048 bits 0.011879s 0.000342s     84.2   2921.7	hardware this
+#
+# rsa 4096 bits 0.327097s 0.004859s      3.1    205.8	software integer
+# rsa 4096 bits 0.229318s 0.003859s      4.4    259.2	software SSE2
+# rsa 4096 bits 0.233953s 0.003274s      4.3    305.4	hardware VIA SDK
+# rsa 4096 bits 0.070493s 0.001166s     14.2    857.6	hardware this
+#
+# dsa  512 bits 0.001342s 0.001651s    745.2    605.7	software integer
+# dsa  512 bits 0.000844s 0.000987s   1185.3   1013.1	software SSE2
+# dsa  512 bits 0.001902s 0.002247s    525.6    444.9	hardware VIA SDK
+# dsa  512 bits 0.000458s 0.000524s   2182.2   1909.1	hardware this
+#
+# dsa 1024 bits 0.003964s 0.004926s    252.3    203.0	software integer
+# dsa 1024 bits 0.002686s 0.003166s    372.3    315.8	software SSE2
+# dsa 1024 bits 0.002397s 0.002823s    417.1    354.3	hardware VIA SDK
+# dsa 1024 bits 0.000978s 0.001170s   1022.2    855.0	hardware this
+#
+# dsa 2048 bits 0.013280s 0.016518s     75.3     60.5	software integer
+# dsa 2048 bits 0.009911s 0.011522s    100.9     86.8	software SSE2
+# dsa 2048 bits 0.009542s 0.011763s    104.8     85.0	hardware VIA SDK
+# dsa 2048 bits 0.002884s 0.003352s    346.8    298.3	hardware this
+#
+# To give you some other reference point here is output for 2.4GHz P4
+# running hand-coded SSE2 bn_mul_mont found in 0.9.9, i.e. "software
+# SSE2" in above terms.
+#
+# rsa  512 bits 0.000407s 0.000047s   2454.2  21137.0
+# rsa 1024 bits 0.002426s 0.000141s    412.1   7100.0
+# rsa 2048 bits 0.015046s 0.000491s     66.5   2034.9
+# rsa 4096 bits 0.109770s 0.002379s      9.1    420.3
+# dsa  512 bits 0.000438s 0.000525s   2281.1   1904.1
+# dsa 1024 bits 0.001346s 0.001595s    742.7    627.0
+# dsa 2048 bits 0.004745s 0.005582s    210.7    179.1
+#
+# Conclusions: 
+# - VIA SDK leaves a *lot* of room for improvement (which this
+#   implementation successfully fills:-);
+# - 'rep montmul' gives up to >3x performance improvement depending on
+#   key length;
+# - in terms of absolute performance it delivers approximately as much
+#   as modern out-of-order 32-bit cores [again, for longer keys].
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+$output = pop;
+open STDOUT,">$output";
+
+&asm_init($ARGV[0],"via-mont.pl");
+
+# int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num);
+$func="bn_mul_mont_padlock";
+
+$pad=16*1;	# amount of reserved bytes on top of every vector
+
+# stack layout
+$mZeroPrime=&DWP(0,"esp");		# these are specified by VIA
+$A=&DWP(4,"esp");
+$B=&DWP(8,"esp");
+$T=&DWP(12,"esp");
+$M=&DWP(16,"esp");
+$scratch=&DWP(20,"esp");
+$rp=&DWP(24,"esp");			# these are mine
+$sp=&DWP(28,"esp");
+# &DWP(32,"esp")			# 32 byte scratch area
+# &DWP(64+(4*$num+$pad)*0,"esp")	# padded tp[num]
+# &DWP(64+(4*$num+$pad)*1,"esp")	# padded copy of ap[num]
+# &DWP(64+(4*$num+$pad)*2,"esp")	# padded copy of bp[num]
+# &DWP(64+(4*$num+$pad)*3,"esp")	# padded copy of np[num]
+# Note that SDK suggests to unconditionally allocate 2K per vector. This
+# has quite an impact on performance. It naturally depends on key length,
+# but to give an example 1024 bit private RSA key operations suffer >30%
+# penalty. I allocate only as much as actually required...
+
+&function_begin($func);
+	&xor	("eax","eax");
+	&mov	("ecx",&wparam(5));	# num
+	# meet VIA's limitations for num [note that the specification
+	# expresses them in bits, while we work with amount of 32-bit words]
+	&test	("ecx",3);
+	&jnz	(&label("leave"));	# num % 4 != 0
+	&cmp	("ecx",8);
+	&jb	(&label("leave"));	# num < 8
+	&cmp	("ecx",1024);
+	&ja	(&label("leave"));	# num > 1024
+
+	&pushf	();
+	&cld	();
+
+	&mov	("edi",&wparam(0));	# rp
+	&mov	("eax",&wparam(1));	# ap
+	&mov	("ebx",&wparam(2));	# bp
+	&mov	("edx",&wparam(3));	# np
+	&mov	("esi",&wparam(4));	# n0
+	&mov	("esi",&DWP(0,"esi"));	# *n0
+
+	&lea	("ecx",&DWP($pad,"","ecx",4));	# ecx becomes vector size in bytes
+	&lea	("ebp",&DWP(64,"","ecx",4));	# allocate 4 vectors + 64 bytes
+	&neg	("ebp");
+	&add	("ebp","esp");
+	&and	("ebp",-64);		# align to cache-line
+	&xchg	("ebp","esp");		# alloca
+
+	&mov	($rp,"edi");		# save rp
+	&mov	($sp,"ebp");		# save esp
+
+	&mov	($mZeroPrime,"esi");
+	&lea	("esi",&DWP(64,"esp"));	# tp
+	&mov	($T,"esi");
+	&lea	("edi",&DWP(32,"esp"));	# scratch area
+	&mov	($scratch,"edi");
+	&mov	("esi","eax");
+
+	&lea	("ebp",&DWP(-$pad,"ecx"));
+	&shr	("ebp",2);		# restore original num value in ebp
+
+	&xor	("eax","eax");
+
+	&mov	("ecx","ebp");
+	&lea	("ecx",&DWP((32+$pad)/4,"ecx"));# padded tp + scratch
+	&data_byte(0xf3,0xab);		# rep stosl, bzero
+
+	&mov	("ecx","ebp");
+	&lea	("edi",&DWP(64+$pad,"esp","ecx",4));# pointer to ap copy
+	&mov	($A,"edi");
+	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
+	&mov	("ecx",$pad/4);
+	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
+	# edi points at the end of padded ap copy...
+
+	&mov	("ecx","ebp");
+	&mov	("esi","ebx");
+	&mov	($B,"edi");
+	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
+	&mov	("ecx",$pad/4);
+	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
+	# edi points at the end of padded bp copy...
+
+	&mov	("ecx","ebp");
+	&mov	("esi","edx");
+	&mov	($M,"edi");
+	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
+	&mov	("ecx",$pad/4);
+	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
+	# edi points at the end of padded np copy...
+
+	# let magic happen...
+	&mov	("ecx","ebp");
+	&mov	("esi","esp");
+	&shl	("ecx",5);		# convert word counter to bit counter
+	&align	(4);
+	&data_byte(0xf3,0x0f,0xa6,0xc0);# rep montmul
+
+	&mov	("ecx","ebp");
+	&lea	("esi",&DWP(64,"esp"));		# tp
+	# edi still points at the end of padded np copy...
+	&neg	("ebp");
+	&lea	("ebp",&DWP(-$pad,"edi","ebp",4));	# so just "rewind"
+	&mov	("edi",$rp);			# restore rp
+	&xor	("edx","edx");			# i=0 and clear CF
+
+&set_label("sub",8);
+	&mov	("eax",&DWP(0,"esi","edx",4));
+	&sbb	("eax",&DWP(0,"ebp","edx",4));
+	&mov	(&DWP(0,"edi","edx",4),"eax");	# rp[i]=tp[i]-np[i]
+	&lea	("edx",&DWP(1,"edx"));		# i++
+	&loop	(&label("sub"));		# doesn't affect CF!
+
+	&mov	("eax",&DWP(0,"esi","edx",4));	# upmost overflow bit
+	&sbb	("eax",0);
+	&and	("esi","eax");
+	&not	("eax");
+	&mov	("ebp","edi");
+	&and	("ebp","eax");
+	&or	("esi","ebp");			# tp=carry?tp:rp
+
+	&mov	("ecx","edx");			# num
+	&xor	("edx","edx");			# i=0
+
+&set_label("copy",8);
+	&mov	("eax",&DWP(0,"esi","edx",4));
+	&mov	(&DWP(64,"esp","edx",4),"ecx");	# zap tp
+	&mov	(&DWP(0,"edi","edx",4),"eax");
+	&lea	("edx",&DWP(1,"edx"));		# i++
+	&loop	(&label("copy"));
+
+	&mov	("ebp",$sp);
+	&xor	("eax","eax");
+
+	&mov	("ecx",64/4);
+	&mov	("edi","esp");		# zap frame including scratch area
+	&data_byte(0xf3,0xab);		# rep stosl, bzero
+
+	# zap copies of ap, bp and np
+	&lea	("edi",&DWP(64+$pad,"esp","edx",4));# pointer to ap
+	&lea	("ecx",&DWP(3*$pad/4,"edx","edx",2));
+	&data_byte(0xf3,0xab);		# rep stosl, bzero
+
+	&mov	("esp","ebp");
+	&inc	("eax");		# signal "done"
+	&popf	();
+&set_label("leave");
+&function_end($func);
+
+&asciz("Padlock Montgomery Multiplication, CRYPTOGAMS by <appro\@openssl.org>");
+
+&asm_finish();
+
+close STDOUT;