1 files changed, 142 insertions, 0 deletions
diff --git a/examples/example_toplevel.v b/examples/example_toplevel.v
new file mode 100644
index 0000000..1da1750
--- /dev/null
+++ b/examples/example_toplevel.v
@@ -0,0 +1,142 @@
+`default_nettype none
+`timescale 1ns/1ns
+
+`include "messages.vh"
+
+`ifndef SIMULATION
+ `error_SIMULATION_not_defined
+; /* Cause syntax error */
+`endif
+
+`ifndef ROM_WORDS_COUNT
+ `error_ROM_WORDS_COUNT_must_be_defined
+; /* Cause syntax error */
+`endif
+
+`ifndef EMBEDDED_ROM_FILE
+ `error_EMBEDDED_ROM_FILE_not_defined
+; /* Cause syntax error */
+`endif
+
+`ifndef FONT_FILE
+ `error_FONT_FILE_not_defined
+; /* Cause syntax error */
+`endif
+
+`ifndef FINISH_ON_IMAGE_WRITES
+ `define FINISH_ON_IMAGE_WRITES 0
+`else
+ `define FINISH_RULE_PROVIDED 1
+`endif
+
+`ifndef FINISH_ON_LED1
+ `define FINISH_ON_LED1 -1
+`else
+ `define FINISH_RULE_PROVIDED 1
+`endif
+
+`ifndef FINISH_ON_LED2
+ `define FINISH_ON_LED2 -1
+`else
+ `define FINISH_RULE_PROVIDED 1
+`endif
+
+`ifndef FINISH_RULE_PROVIDED
+ `define FINISH_RULE_PROVIDED 0
+`endif
+
+`ifndef MIN_TIME_NS
+ `define MIN_TIME_NS 1000
+`endif
+
+`ifndef MAX_TIME_NS
+ `define MAX_TIME_NS 250_000_000
+`endif
+
+module example();
+   wire [9:0] image_writes;
+   wire       can_finish;
+
+   reg 	      clock_100mhz;
+   reg 	      reset;
+
+   wire       led1;
+   wire       led2;
+
+   soc_with_peripherals
+     #(
+       .FONT_FILE(`FONT_FILE),
+       .EMBEDDED_ROM_WORDS_COUNT(`ROM_WORDS_COUNT),
+       .EMBEDDED_ROM_FILE(`EMBEDDED_ROM_FILE)
+       ) soc
+       (
+	.clock_100mhz(clock_100mhz),
+
+	.button1(!reset),
+	.button2(1'b1),
+
+	.led1(led1),
+	.led2(led2),
+
+	.image_writes(image_writes)
+	);
+
+   integer    i;
+
+   initial begin
+      reset <= 1;
+      clock_100mhz <= 0;
+
+      if (!`FINISH_RULE_PROVIDED) begin
+	 `MSG(("No finish rule provided, simulation will terminate after %0d ns,",
+	       `MAX_TIME_NS));
+      end
+
+      for (i = 0; i < `MAX_TIME_NS; i = i + 5) begin
+	 #5;
+
+	 if (clock_100mhz)
+	   reset <= 0;
+
+	 clock_100mhz <= ~clock_100mhz;
+      end
+
+      `MSG(("%0d ns passed, finishing", `MAX_TIME_NS));
+      $finish;
+   end
+
+   assign can_finish = i >= `MIN_TIME_NS;
+
+   always @ (led1) begin
+      if (i > 0) begin
+	 if (!led1)
+	   `MSG(("LED1 goes on, stack machine finished operation"));
+	 else
+	   `MSG(("LED1 goes off, stack machine resets"));
+      end
+   end
+
+   always @ (led2) begin
+      if (i > 35) begin
+	 if (!led2)
+	   `MSG(("LED2 goes on"));
+	 else
+	   `MSG(("LED2 goes off"));
+      end
+   end
+
+   generate
+      if (`FINISH_RULE_PROVIDED) begin
+	 always @ (image_writes or led1 or led2 or can_finish) begin
+	    if ((image_writes >= `FINISH_ON_IMAGE_WRITES) &&
+		(`FINISH_ON_LED1 < 0 || `FINISH_ON_LED1 == !led1) &&
+		(`FINISH_ON_LED2 < 0 || `FINISH_ON_LED2 == !led2) &&
+		can_finish) begin
+	       #1;
+	       `MSG(("finishing"));
+	       $finish;
+	    end
+	 end
+      end // if (`FINISH_RULE_PROVIDED)
+   endgenerate
+endmodule // example