path: root/openssl-1.1.0h/crypto/rc4/asm/rc4-ia64.pl

#! /usr/bin/env perl
# Copyright 2005-2016 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License").  You may not use
# this file except in compliance with the License.  You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html

#
# ====================================================================
# Written by David Mosberger <David.Mosberger@acm.org> based on the
# Itanium optimized Crypto code which was released by HP Labs at
# http://www.hpl.hp.com/research/linux/crypto/.
#
# Copyright (c) 2005 Hewlett-Packard Development Company, L.P.
#
# Permission is hereby granted, free of charge, to any person obtaining
# a copy of this software and associated documentation files (the
# "Software"), to deal in the Software without restriction, including
# without limitation the rights to use, copy, modify, merge, publish,
# distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so, subject to
# the following conditions:
#
# The above copyright notice and this permission notice shall be
# included in all copies or substantial portions of the Software.

# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */



# This is a little helper program which generates a software-pipelined
# for RC4 encryption.  The basic algorithm looks like this:
#
#   for (counter = 0; counter < len; ++counter)
#     {
#       in = inp[counter];
#       SI = S[I];
#       J = (SI + J) & 0xff;
#       SJ = S[J];
#       T = (SI + SJ) & 0xff;
#       S[I] = SJ, S[J] = SI;
#       ST = S[T];
#       outp[counter] = in ^ ST;
#       I = (I + 1) & 0xff;
#     }
#
# Pipelining this loop isn't easy, because the stores to the S[] array
# need to be observed in the right order.  The loop generated by the
# code below has the following pipeline diagram:
#
#      cycle
#     | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 |16 |17 |
# iter
#   1: xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
#   2:             xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
#   3:                         xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
#
#   where:
# 	LDI = load of S[I]
# 	LDJ = load of S[J]
# 	SWP = swap of S[I] and S[J]
# 	LDT = load of S[T]
#
# Note that in the above diagram, the major trouble-spot is that LDI
# of the 2nd iteration is performed BEFORE the SWP of the first
# iteration.  Fortunately, this is easy to detect (I of the 1st
# iteration will be equal to J of the 2nd iteration) and when this
# happens, we simply forward the proper value from the 1st iteration
# to the 2nd one.  The proper value in this case is simply the value
# of S[I] from the first iteration (thanks to the fact that SWP
# simply swaps the contents of S[I] and S[J]).
#
# Another potential trouble-spot is in cycle 7, where SWP of the 1st
# iteration issues at the same time as the LDI of the 3rd iteration.
# However, thanks to IA-64 execution semantics, this can be taken
# care of simply by placing LDI later in the instruction-group than
# SWP.  IA-64 CPUs will automatically forward the value if they
# detect that the SWP and LDI are accessing the same memory-location.

# The core-loop that can be pipelined then looks like this (annotated
# with McKinley/Madison issue port & latency numbers, assuming L1
# cache hits for the most part):

# operation:	    instruction:		    issue-ports:  latency
# ------------------  -----------------------------   ------------- -------

# Data = *inp++       ld1 data = [inp], 1             M0-M1         1 cyc     c0
#                     shladd Iptr = I, KeyTable, 3    M0-M3, I0, I1 1 cyc
# I = (I + 1) & 0xff  padd1 nextI = I, one            M0-M3, I0, I1 3 cyc
#                     ;;
# SI = S[I]           ld8 SI = [Iptr]                 M0-M1         1 cyc     c1 * after SWAP!
#                     ;;
#                     cmp.eq.unc pBypass = I, J                                  * after J is valid!
# J = SI + J          add J = J, SI                   M0-M3, I0, I1 1 cyc     c2
#                     (pBypass) br.cond.spnt Bypass
#                     ;;
# ---------------------------------------------------------------------------------------
# J = J & 0xff        zxt1 J = J                      I0, I1, 1 cyc           c3
#                     ;;
#                     shladd Jptr = J, KeyTable, 3    M0-M3, I0, I1 1 cyc     c4
#                     ;;
# SJ = S[J]           ld8 SJ = [Jptr]                 M0-M1         1 cyc     c5
#                     ;;
# ---------------------------------------------------------------------------------------
# T = (SI + SJ)       add T = SI, SJ                  M0-M3, I0, I1 1 cyc     c6
#                     ;;
# T = T & 0xff        zxt1 T = T                      I0, I1        1 cyc
# S[I] = SJ           st8 [Iptr] = SJ                 M2-M3                   c7
# S[J] = SI           st8 [Jptr] = SI                 M2-M3
#                     ;;
#                     shladd Tptr = T, KeyTable, 3    M0-M3, I0, I1 1 cyc     c8
#                     ;;
# ---------------------------------------------------------------------------------------
# T = S[T]            ld8 T = [Tptr]                  M0-M1         1 cyc     c9
#                     ;;
# data ^= T           xor data = data, T              M0-M3, I0, I1 1 cyc     c10
#                     ;;
# *out++ = Data ^ T   dep word = word, data, 8, POS   I0, I1        1 cyc     c11
#                     ;;
# ---------------------------------------------------------------------------------------

# There are several points worth making here:

#   - Note that due to the bypass/forwarding-path, the first two
#     phases of the loop are strangly mingled together.  In
#     particular, note that the first stage of the pipeline is
#     using the value of "J", as calculated by the second stage.
#   - Each bundle-pair will have exactly 6 instructions.
#   - Pipelined, the loop can execute in 3 cycles/iteration and
#     4 stages.  However, McKinley/Madison can issue "st1" to
#     the same bank at a rate of at most one per 4 cycles.  Thus,
#     instead of storing each byte, we accumulate them in a word
#     and then write them back at once with a single "st8" (this
#     implies that the setup code needs to ensure that the output
#     buffer is properly aligned, if need be, by encoding the
#     first few bytes separately).
#   - There is no space for a "br.ctop" instruction.  For this
#     reason we can't use module-loop support in IA-64 and have
#     to do a traditional, purely software-pipelined loop.
#   - We can't replace any of the remaining "add/zxt1" pairs with
#     "padd1" because the latency for that instruction is too high
#     and would push the loop to the point where more bypasses
#     would be needed, which we don't have space for.
#   - The above loop runs at around 3.26 cycles/byte, or roughly
#     440 MByte/sec on a 1.5GHz Madison.  This is well below the
#     system bus bandwidth and hence with judicious use of
#     "lfetch" this loop can run at (almost) peak speed even when
#     the input and output data reside in memory.  The
#     max. latency that can be tolerated is (PREFETCH_DISTANCE *
#     L2_LINE_SIZE * 3 cyc), or about 384 cycles assuming (at
#     least) 1-ahead prefetching of 128 byte cache-lines.  Note
#     that we do NOT prefetch into L1, since that would only
#     interfere with the S[] table values stored there.  This is
#     acceptable because there is a 10 cycle latency between
#     load and first use of the input data.
#   - We use a branch to out-of-line bypass-code of cycle-pressure:
#     we calculate the next J, check for the need to activate the
#     bypass path, and activate the bypass path ALL IN THE SAME
#     CYCLE.  If we didn't have these constraints, we could do
#     the bypass with a simple conditional move instruction.
#     Fortunately, the bypass paths get activated relatively
#     infrequently, so the extra branches don't cost all that much
#     (about 0.04 cycles/byte, measured on a 16396 byte file with
#     random input data).
#

$output = pop;
open STDOUT,">$output";

$phases = 4;		# number of stages/phases in the pipelined-loop
$unroll_count = 6;	# number of times we unrolled it
$pComI = (1 << 0);
$pComJ = (1 << 1);
$pComT = (1 << 2);
$pOut  = (1 << 3);

$NData = 4;
$NIP = 3;
$NJP = 2;
$NI = 2;
$NSI = 3;
$NSJ = 2;
$NT = 2;
$NOutWord = 2;

#
# $threshold is the minimum length before we attempt to use the
# big software-pipelined loop.  It MUST be greater-or-equal
# to:
#  		PHASES * (UNROLL_COUNT + 1) + 7
#
# The "+ 7" comes from the fact we may have to encode up to
#   7 bytes separately before the output pointer is aligned.
#
$threshold = (3 * ($phases * ($unroll_count + 1)) + 7);

sub I {
    local *code = shift;
    local $format = shift;
    $code .= sprintf ("\t\t".$format."\n", @_);
}

sub P {
    local *code = shift;
    local $format = shift;
    $code .= sprintf ($format."\n", @_);
}

sub STOP {
    local *code = shift;
    $code .=<<___;
		;;
___
}

sub emit_body {
    local *c = shift;
    local *bypass = shift;
    local ($iteration, $p) = @_;

    local $i0 = $iteration;
    local $i1 = $iteration - 1;
    local $i2 = $iteration - 2;
    local $i3 = $iteration - 3;
    local $iw0 = ($iteration - 3) / 8;
    local $iw1 = ($iteration > 3) ? ($iteration - 4) / 8 : 1;
    local $byte_num = ($iteration - 3) % 8;
    local $label = $iteration + 1;
    local $pAny = ($p & 0xf) == 0xf;
    local $pByp = (($p & $pComI) && ($iteration > 0));

    $c.=<<___;
//////////////////////////////////////////////////
___

    if (($p & 0xf) == 0) {
	$c.="#ifdef HOST_IS_BIG_ENDIAN\n";
	&I(\$c,"shr.u	OutWord[%u] = OutWord[%u], 32;;",
				$iw1 % $NOutWord, $iw1 % $NOutWord);
	$c.="#endif\n";
	&I(\$c, "st4 [OutPtr] = OutWord[%u], 4", $iw1 % $NOutWord);
	return;
    }

    # Cycle 0
    &I(\$c, "{ .mmi")					      if ($pAny);
    &I(\$c, "ld1    Data[%u] = [InPtr], 1", $i0 % $NData)     if ($p & $pComI);
    &I(\$c, "padd1  I[%u] = One, I[%u]", $i0 % $NI, $i1 % $NI)if ($p & $pComI);
    &I(\$c, "zxt1   J = J")				      if ($p & $pComJ);
    &I(\$c, "}")					      if ($pAny);
    &I(\$c, "{ .mmi")					      if ($pAny);
    &I(\$c, "LKEY   T[%u] = [T[%u]]", $i1 % $NT, $i1 % $NT)   if ($p & $pOut);
    &I(\$c, "add    T[%u] = SI[%u], SJ[%u]",
       $i0 % $NT, $i2 % $NSI, $i1 % $NSJ)		      if ($p & $pComT);
    &I(\$c, "KEYADDR(IPr[%u], I[%u])", $i0 % $NIP, $i1 % $NI) if ($p & $pComI);
    &I(\$c, "}")					      if ($pAny);
    &STOP(\$c);

    # Cycle 1
    &I(\$c, "{ .mmi")					      if ($pAny);
    &I(\$c, "SKEY   [IPr[%u]] = SJ[%u]", $i2 % $NIP, $i1%$NSJ)if ($p & $pComT);
    &I(\$c, "SKEY   [JP[%u]] = SI[%u]", $i1 % $NJP, $i2%$NSI) if ($p & $pComT);
    &I(\$c, "zxt1   T[%u] = T[%u]", $i0 % $NT, $i0 % $NT)     if ($p & $pComT);
    &I(\$c, "}")					      if ($pAny);
    &I(\$c, "{ .mmi")					      if ($pAny);
    &I(\$c, "LKEY   SI[%u] = [IPr[%u]]", $i0 % $NSI, $i0%$NIP)if ($p & $pComI);
    &I(\$c, "KEYADDR(JP[%u], J)", $i0 % $NJP)		      if ($p & $pComJ);
    &I(\$c, "xor    Data[%u] = Data[%u], T[%u]",
       $i3 % $NData, $i3 % $NData, $i1 % $NT)		      if ($p & $pOut);
    &I(\$c, "}")					      if ($pAny);
    &STOP(\$c);

    # Cycle 2
    &I(\$c, "{ .mmi")					      if ($pAny);
    &I(\$c, "LKEY   SJ[%u] = [JP[%u]]", $i0 % $NSJ, $i0%$NJP) if ($p & $pComJ);
    &I(\$c, "cmp.eq pBypass, p0 = I[%u], J", $i1 % $NI)	      if ($pByp);
    &I(\$c, "dep OutWord[%u] = Data[%u], OutWord[%u], BYTE_POS(%u), 8",
       $iw0%$NOutWord, $i3%$NData, $iw1%$NOutWord, $byte_num) if ($p & $pOut);
    &I(\$c, "}")					      if ($pAny);
    &I(\$c, "{ .mmb")					      if ($pAny);
    &I(\$c, "add    J = J, SI[%u]", $i0 % $NSI)		      if ($p & $pComI);
    &I(\$c, "KEYADDR(T[%u], T[%u])", $i0 % $NT, $i0 % $NT)    if ($p & $pComT);
    &P(\$c, "(pBypass)\tbr.cond.spnt.many .rc4Bypass%u",$label)if ($pByp);
    &I(\$c, "}") if ($pAny);
    &STOP(\$c);

    &P(\$c, ".rc4Resume%u:", $label)			      if ($pByp);
    if ($byte_num == 0 && $iteration >= $phases) {
	&I(\$c, "st8 [OutPtr] = OutWord[%u], 8",
	   $iw1 % $NOutWord)				      if ($p & $pOut);
	if ($iteration == (1 + $unroll_count) * $phases - 1) {
	    if ($unroll_count == 6) {
		&I(\$c, "mov OutWord[%u] = OutWord[%u]",
		   $iw1 % $NOutWord, $iw0 % $NOutWord);
	    }
	    &I(\$c, "lfetch.nt1 [InPrefetch], %u",
	       $unroll_count * $phases);
	    &I(\$c, "lfetch.excl.nt1 [OutPrefetch], %u",
	       $unroll_count * $phases);
	    &I(\$c, "br.cloop.sptk.few .rc4Loop");
	}
    }

    if ($pByp) {
	&P(\$bypass, ".rc4Bypass%u:", $label);
	&I(\$bypass, "sub J = J, SI[%u]", $i0 % $NSI);
	&I(\$bypass, "nop 0");
	&I(\$bypass, "nop 0");
	&I(\$bypass, ";;");
	&I(\$bypass, "add J = J, SI[%u]", $i1 % $NSI);
	&I(\$bypass, "mov SI[%u] = SI[%u]", $i0 % $NSI, $i1 % $NSI);
	&I(\$bypass, "br.sptk.many .rc4Resume%u\n", $label);
	&I(\$bypass, ";;");
    }
}

$code=<<___;
.ident \"rc4-ia64.s, version 3.0\"
.ident \"Copyright (c) 2005 Hewlett-Packard Development Company, L.P.\"

#define LCSave		r8
#define PRSave		r9

/* Inputs become invalid once rotation begins!  */

#define StateTable	in0
#define DataLen		in1
#define InputBuffer	in2
#define OutputBuffer	in3

#define KTable		r14
#define J		r15
#define InPtr		r16
#define OutPtr		r17
#define InPrefetch	r18
#define OutPrefetch	r19
#define One		r20
#define LoopCount	r21
#define Remainder	r22
#define IFinal		r23
#define EndPtr		r24

#define tmp0		r25
#define tmp1		r26

#define pBypass		p6
#define pDone		p7
#define pSmall		p8
#define pAligned	p9
#define pUnaligned	p10

#define pComputeI	pPhase[0]
#define pComputeJ	pPhase[1]
#define pComputeT	pPhase[2]
#define pOutput		pPhase[3]

#define RetVal		r8
#define L_OK		p7
#define L_NOK		p8

#define	_NINPUTS	4
#define	_NOUTPUT	0

#define	_NROTATE	24
#define	_NLOCALS	(_NROTATE - _NINPUTS - _NOUTPUT)

#ifndef SZ
# define SZ	4	// this must be set to sizeof(RC4_INT)
#endif

#if SZ == 1
# define LKEY			ld1
# define SKEY			st1
# define KEYADDR(dst, i)	add dst = i, KTable
#elif SZ == 2
# define LKEY			ld2
# define SKEY			st2
# define KEYADDR(dst, i)	shladd dst = i, 1, KTable
#elif SZ == 4
# define LKEY			ld4
# define SKEY			st4
# define KEYADDR(dst, i)	shladd dst = i, 2, KTable
#else
# define LKEY			ld8
# define SKEY			st8
# define KEYADDR(dst, i)	shladd dst = i, 3, KTable
#endif

#if defined(_HPUX_SOURCE) && !defined(_LP64)
# define ADDP	addp4
#else
# define ADDP	add
#endif

/* Define a macro for the bit number of the n-th byte: */

#if defined(_HPUX_SOURCE) || defined(B_ENDIAN)
# define HOST_IS_BIG_ENDIAN
# define BYTE_POS(n)	(56 - (8 * (n)))
#else
# define BYTE_POS(n)	(8 * (n))
#endif

/*
   We must perform the first phase of the pipeline explicitly since
   we will always load from the stable the first time. The br.cexit
   will never be taken since regardless of the number of bytes because
   the epilogue count is 4.
*/
/* MODSCHED_RC4 macro was split to _PROLOGUE and _LOOP, because HP-UX
   assembler failed on original macro with syntax error. <appro> */
#define MODSCHED_RC4_PROLOGUE						   \\
	{								   \\
				ld1		Data[0] = [InPtr], 1;	   \\
				add		IFinal = 1, I[1];	   \\
				KEYADDR(IPr[0], I[1]);			   \\
	} ;;								   \\
	{								   \\
				LKEY		SI[0] = [IPr[0]];	   \\
				mov		pr.rot = 0x10000;	   \\
				mov		ar.ec = 4;		   \\
	} ;;								   \\
	{								   \\
				add		J = J, SI[0];		   \\
				zxt1		I[0] = IFinal;		   \\
				br.cexit.spnt.few .+16; /* never taken */  \\
	} ;;
#define MODSCHED_RC4_LOOP(label)					   \\
label:									   \\
	{	.mmi;							   \\
		(pComputeI)	ld1		Data[0] = [InPtr], 1;	   \\
		(pComputeI)	add		IFinal = 1, I[1];	   \\
		(pComputeJ)	zxt1		J = J;			   \\
	}{	.mmi;							   \\
		(pOutput)	LKEY		T[1] = [T[1]];		   \\
		(pComputeT)	add		T[0] = SI[2], SJ[1];	   \\
		(pComputeI)	KEYADDR(IPr[0], I[1]);			   \\
	} ;;								   \\
	{	.mmi;							   \\
		(pComputeT)	SKEY		[IPr[2]] = SJ[1];	   \\
		(pComputeT)	SKEY		[JP[1]] = SI[2];	   \\
		(pComputeT)	zxt1		T[0] = T[0];		   \\
	}{	.mmi;							   \\
		(pComputeI)	LKEY		SI[0] = [IPr[0]];	   \\
		(pComputeJ)	KEYADDR(JP[0], J);			   \\
		(pComputeI)	cmp.eq.unc	pBypass, p0 = I[1], J;	   \\
	} ;;								   \\
	{	.mmi;							   \\
		(pComputeJ)	LKEY		SJ[0] = [JP[0]];	   \\
		(pOutput)	xor		Data[3] = Data[3], T[1];   \\
				nop		0x0;			   \\
	}{	.mmi;							   \\
		(pComputeT)	KEYADDR(T[0], T[0]);			   \\
		(pBypass)	mov		SI[0] = SI[1];		   \\
		(pComputeI)	zxt1		I[0] = IFinal;		   \\
	} ;;								   \\
	{	.mmb;							   \\
		(pOutput)	st1		[OutPtr] = Data[3], 1;	   \\
		(pComputeI)	add		J = J, SI[0];		   \\
				br.ctop.sptk.few label;			   \\
	} ;;

	.text

	.align	32

	.type	RC4, \@function
	.global	RC4

	.proc	RC4
	.prologue

RC4:
	{
	  	.mmi
		alloc	r2 = ar.pfs, _NINPUTS, _NLOCALS, _NOUTPUT, _NROTATE

		.rotr Data[4], I[2], IPr[3], SI[3], JP[2], SJ[2], T[2], \\
		      OutWord[2]
		.rotp pPhase[4]

		ADDP		InPrefetch = 0, InputBuffer
		ADDP		KTable = 0, StateTable
	}
	{
		.mmi
		ADDP		InPtr = 0, InputBuffer
		ADDP		OutPtr = 0, OutputBuffer
		mov		RetVal = r0
	}
	;;
	{
		.mmi
		lfetch.nt1	[InPrefetch], 0x80
		ADDP		OutPrefetch = 0, OutputBuffer
	}
	{               // Return 0 if the input length is nonsensical
        	.mib
		ADDP		StateTable = 0, StateTable
        	cmp.ge.unc  	L_NOK, L_OK = r0, DataLen
	(L_NOK) br.ret.sptk.few rp
	}
	;;
	{
        	.mib
        	cmp.eq.or  	L_NOK, L_OK = r0, InPtr
        	cmp.eq.or  	L_NOK, L_OK = r0, OutPtr
		nop		0x0
	}
	{
		.mib
        	cmp.eq.or  	L_NOK, L_OK = r0, StateTable
		nop		0x0
	(L_NOK) br.ret.sptk.few rp
	}
	;;
		LKEY		I[1] = [KTable], SZ
/* Prefetch the state-table. It contains 256 elements of size SZ */

#if SZ == 1
		ADDP		tmp0 = 1*128, StateTable
#elif SZ == 2
		ADDP		tmp0 = 3*128, StateTable
		ADDP		tmp1 = 2*128, StateTable
#elif SZ == 4
		ADDP		tmp0 = 7*128, StateTable
		ADDP		tmp1 = 6*128, StateTable
#elif SZ == 8
		ADDP		tmp0 = 15*128, StateTable
		ADDP		tmp1 = 14*128, StateTable
#endif
		;;
#if SZ >= 8
		lfetch.fault.nt1		[tmp0], -256	// 15
		lfetch.fault.nt1		[tmp1], -256;;
		lfetch.fault.nt1		[tmp0], -256	// 13
		lfetch.fault.nt1		[tmp1], -256;;
		lfetch.fault.nt1		[tmp0], -256	// 11
		lfetch.fault.nt1		[tmp1], -256;;
		lfetch.fault.nt1		[tmp0], -256	//  9
		lfetch.fault.nt1		[tmp1], -256;;
#endif
#if SZ >= 4
		lfetch.fault.nt1		[tmp0], -256	//  7
		lfetch.fault.nt1		[tmp1], -256;;
		lfetch.fault.nt1		[tmp0], -256	//  5
		lfetch.fault.nt1		[tmp1], -256;;
#endif
#if SZ >= 2
		lfetch.fault.nt1		[tmp0], -256	//  3
		lfetch.fault.nt1		[tmp1], -256;;
#endif
	{
		.mii
		lfetch.fault.nt1		[tmp0]		//  1
		add		I[1]=1,I[1];;
		zxt1		I[1]=I[1]
	}
	{
		.mmi
		lfetch.nt1	[InPrefetch], 0x80
		lfetch.excl.nt1	[OutPrefetch], 0x80
		.save		pr, PRSave
		mov		PRSave = pr
	} ;;
	{
		.mmi
		lfetch.excl.nt1	[OutPrefetch], 0x80
		LKEY		J = [KTable], SZ
		ADDP		EndPtr = DataLen, InPtr
	}  ;;
	{
		.mmi
		ADDP		EndPtr = -1, EndPtr	// Make it point to
							// last data byte.
		mov		One = 1
		.save		ar.lc, LCSave
		mov		LCSave = ar.lc
		.body
	} ;;
	{
		.mmb
		sub		Remainder = 0, OutPtr
		cmp.gtu		pSmall, p0 = $threshold, DataLen
(pSmall)	br.cond.dpnt	.rc4Remainder		// Data too small for
							// big loop.
	} ;;
	{
		.mmi
		and		Remainder = 0x7, Remainder
		;;
		cmp.eq		pAligned, pUnaligned = Remainder, r0
		nop		0x0
	} ;;
	{
		.mmb
.pred.rel	"mutex",pUnaligned,pAligned
(pUnaligned)	add		Remainder = -1, Remainder
(pAligned)	sub		Remainder = EndPtr, InPtr
(pAligned)	br.cond.dptk.many .rc4Aligned
	} ;;
	{
		.mmi
		nop		0x0
		nop		0x0
		mov.i		ar.lc = Remainder
	}

/* Do the initial few bytes via the compact, modulo-scheduled loop
   until the output pointer is 8-byte-aligned.  */

		MODSCHED_RC4_PROLOGUE
		MODSCHED_RC4_LOOP(.RC4AlignLoop)

	{
		.mib
		sub		Remainder = EndPtr, InPtr
		zxt1		IFinal = IFinal
		clrrrb				// Clear CFM.rrb.pr so
		;;				// next "mov pr.rot = N"
						// does the right thing.
	}
	{
		.mmi
		mov		I[1] = IFinal
		nop		0x0
		nop		0x0
	} ;;


.rc4Aligned:

/*
   Unrolled loop count = (Remainder - ($unroll_count+1)*$phases)/($unroll_count*$phases)
 */

	{
		.mlx
		add	LoopCount = 1 - ($unroll_count + 1)*$phases, Remainder
		movl		Remainder = 0xaaaaaaaaaaaaaaab
	} ;;
	{
		.mmi
		setf.sig	f6 = LoopCount		// M2, M3	6 cyc
		setf.sig	f7 = Remainder		// M2, M3	6 cyc
		nop		0x0
	} ;;
	{
		.mfb
		nop		0x0
		xmpy.hu		f6 = f6, f7
		nop		0x0
	} ;;
	{
		.mmi
		getf.sig	LoopCount = f6;;	// M2		5 cyc
		nop		0x0
		shr.u		LoopCount = LoopCount, 4
	} ;;
	{
		.mmi
		nop		0x0
		nop		0x0
		mov.i		ar.lc = LoopCount
	} ;;

/* Now comes the unrolled loop: */

.rc4Prologue:
___

$iteration = 0;

# Generate the prologue:
$predicates = 1;
for ($i = 0; $i < $phases; ++$i) {
    &emit_body (\$code, \$bypass, $iteration++, $predicates);
    $predicates = ($predicates << 1) | 1;
}

$code.=<<___;
.rc4Loop:
___

# Generate the body:
for ($i = 0; $i < $unroll_count*$phases; ++$i) {
    &emit_body (\$code, \$bypass, $iteration++, $predicates);
}

$code.=<<___;
.rc4Epilogue:
___

# Generate the epilogue:
for ($i = 0; $i < $phases; ++$i) {
    $predicates <<= 1;
    &emit_body (\$code, \$bypass, $iteration++, $predicates);
}

$code.=<<___;
	{
		.mmi
		lfetch.nt1	[EndPtr]	// fetch line with last byte
		mov		IFinal = I[1]
		nop		0x0
	}

.rc4Remainder:
	{
		.mmi
		sub		Remainder = EndPtr, InPtr	// Calculate
								// # of bytes
								// left - 1
		nop		0x0
		nop		0x0
	} ;;
	{
		.mib
		cmp.eq		pDone, p0 = -1, Remainder // done already?
		mov.i		ar.lc = Remainder
(pDone)		br.cond.dptk.few .rc4Complete
	}

/* Do the remaining bytes via the compact, modulo-scheduled loop */

		MODSCHED_RC4_PROLOGUE
		MODSCHED_RC4_LOOP(.RC4RestLoop)

.rc4Complete:
	{
		.mmi
		add		KTable = -SZ, KTable
		add		IFinal = -1, IFinal
		mov		ar.lc = LCSave
	} ;;
	{
		.mii
		SKEY		[KTable] = J,-SZ
		zxt1		IFinal = IFinal
		mov		pr = PRSave, 0x1FFFF
	} ;;
	{
		.mib
		SKEY		[KTable] = IFinal
		add		RetVal = 1, r0
		br.ret.sptk.few	rp
	} ;;
___

# Last but not least, emit the code for the bypass-code of the unrolled loop:

$code.=$bypass;

$code.=<<___;
	.endp RC4
___

print $code;

close STDOUT;