diff options
Diffstat (limited to 'openssl-1.1.0h/include/openssl/ssl3.h')
| -rw-r--r-- | openssl-1.1.0h/include/openssl/ssl3.h | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/openssl-1.1.0h/include/openssl/ssl3.h b/openssl-1.1.0h/include/openssl/ssl3.h new file mode 100644 index 0000000..4ca434e --- /dev/null +++ b/openssl-1.1.0h/include/openssl/ssl3.h @@ -0,0 +1,310 @@ +/* + * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. + * + * Licensed under the OpenSSL license (the "License"). You may not use + * this file except in compliance with the License. You can obtain a copy + * in the file LICENSE in the source distribution or at + * https://www.openssl.org/source/license.html + */ + +/* ==================================================================== + * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. + * ECC cipher suite support in OpenSSL originally developed by + * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. + */ + +#ifndef HEADER_SSL3_H +# define HEADER_SSL3_H + +# include <openssl/comp.h> +# include <openssl/buffer.h> +# include <openssl/evp.h> +# include <openssl/ssl.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Signalling cipher suite value from RFC 5746 + * (TLS_EMPTY_RENEGOTIATION_INFO_SCSV) + */ +# define SSL3_CK_SCSV 0x030000FF + +/* + * Signalling cipher suite value from draft-ietf-tls-downgrade-scsv-00 + * (TLS_FALLBACK_SCSV) + */ +# define SSL3_CK_FALLBACK_SCSV 0x03005600 + +# define SSL3_CK_RSA_NULL_MD5 0x03000001 +# define SSL3_CK_RSA_NULL_SHA 0x03000002 +# define SSL3_CK_RSA_RC4_40_MD5 0x03000003 +# define SSL3_CK_RSA_RC4_128_MD5 0x03000004 +# define SSL3_CK_RSA_RC4_128_SHA 0x03000005 +# define SSL3_CK_RSA_RC2_40_MD5 0x03000006 +# define SSL3_CK_RSA_IDEA_128_SHA 0x03000007 +# define SSL3_CK_RSA_DES_40_CBC_SHA 0x03000008 +# define SSL3_CK_RSA_DES_64_CBC_SHA 0x03000009 +# define SSL3_CK_RSA_DES_192_CBC3_SHA 0x0300000A + +# define SSL3_CK_DH_DSS_DES_40_CBC_SHA 0x0300000B +# define SSL3_CK_DH_DSS_DES_64_CBC_SHA 0x0300000C +# define SSL3_CK_DH_DSS_DES_192_CBC3_SHA 0x0300000D +# define SSL3_CK_DH_RSA_DES_40_CBC_SHA 0x0300000E +# define SSL3_CK_DH_RSA_DES_64_CBC_SHA 0x0300000F +# define SSL3_CK_DH_RSA_DES_192_CBC3_SHA 0x03000010 + +# define SSL3_CK_DHE_DSS_DES_40_CBC_SHA 0x03000011 +# define SSL3_CK_EDH_DSS_DES_40_CBC_SHA SSL3_CK_DHE_DSS_DES_40_CBC_SHA +# define SSL3_CK_DHE_DSS_DES_64_CBC_SHA 0x03000012 +# define SSL3_CK_EDH_DSS_DES_64_CBC_SHA SSL3_CK_DHE_DSS_DES_64_CBC_SHA +# define SSL3_CK_DHE_DSS_DES_192_CBC3_SHA 0x03000013 +# define SSL3_CK_EDH_DSS_DES_192_CBC3_SHA SSL3_CK_DHE_DSS_DES_192_CBC3_SHA +# define SSL3_CK_DHE_RSA_DES_40_CBC_SHA 0x03000014 +# define SSL3_CK_EDH_RSA_DES_40_CBC_SHA SSL3_CK_DHE_RSA_DES_40_CBC_SHA +# define SSL3_CK_DHE_RSA_DES_64_CBC_SHA 0x03000015 +# define SSL3_CK_EDH_RSA_DES_64_CBC_SHA SSL3_CK_DHE_RSA_DES_64_CBC_SHA +# define SSL3_CK_DHE_RSA_DES_192_CBC3_SHA 0x03000016 +# define SSL3_CK_EDH_RSA_DES_192_CBC3_SHA SSL3_CK_DHE_RSA_DES_192_CBC3_SHA + +# define SSL3_CK_ADH_RC4_40_MD5 0x03000017 +# define SSL3_CK_ADH_RC4_128_MD5 0x03000018 +# define SSL3_CK_ADH_DES_40_CBC_SHA 0x03000019 +# define SSL3_CK_ADH_DES_64_CBC_SHA 0x0300001A +# define SSL3_CK_ADH_DES_192_CBC_SHA 0x0300001B + +# define SSL3_TXT_RSA_NULL_MD5 "NULL-MD5" +# define SSL3_TXT_RSA_NULL_SHA "NULL-SHA" +# define SSL3_TXT_RSA_RC4_40_MD5 "EXP-RC4-MD5" +# define SSL3_TXT_RSA_RC4_128_MD5 "RC4-MD5" +# define SSL3_TXT_RSA_RC4_128_SHA "RC4-SHA" +# define SSL3_TXT_RSA_RC2_40_MD5 "EXP-RC2-CBC-MD5" +# define SSL3_TXT_RSA_IDEA_128_SHA "IDEA-CBC-SHA" +# define SSL3_TXT_RSA_DES_40_CBC_SHA "EXP-DES-CBC-SHA" +# define SSL3_TXT_RSA_DES_64_CBC_SHA "DES-CBC-SHA" +# define SSL3_TXT_RSA_DES_192_CBC3_SHA "DES-CBC3-SHA" + +# define SSL3_TXT_DH_DSS_DES_40_CBC_SHA "EXP-DH-DSS-DES-CBC-SHA" +# define SSL3_TXT_DH_DSS_DES_64_CBC_SHA "DH-DSS-DES-CBC-SHA" +# define SSL3_TXT_DH_DSS_DES_192_CBC3_SHA "DH-DSS-DES-CBC3-SHA" +# define SSL3_TXT_DH_RSA_DES_40_CBC_SHA "EXP-DH-RSA-DES-CBC-SHA" +# define SSL3_TXT_DH_RSA_DES_64_CBC_SHA "DH-RSA-DES-CBC-SHA" +# define SSL3_TXT_DH_RSA_DES_192_CBC3_SHA "DH-RSA-DES-CBC3-SHA" + +# define SSL3_TXT_DHE_DSS_DES_40_CBC_SHA "EXP-DHE-DSS-DES-CBC-SHA" +# define SSL3_TXT_DHE_DSS_DES_64_CBC_SHA "DHE-DSS-DES-CBC-SHA" +# define SSL3_TXT_DHE_DSS_DES_192_CBC3_SHA "DHE-DSS-DES-CBC3-SHA" +# define SSL3_TXT_DHE_RSA_DES_40_CBC_SHA "EXP-DHE-RSA-DES-CBC-SHA" +# define SSL3_TXT_DHE_RSA_DES_64_CBC_SHA "DHE-RSA-DES-CBC-SHA" +# define SSL3_TXT_DHE_RSA_DES_192_CBC3_SHA "DHE-RSA-DES-CBC3-SHA" + +/* + * This next block of six "EDH" labels is for backward compatibility with + * older versions of OpenSSL. New code should use the six "DHE" labels above + * instead: + */ +# define SSL3_TXT_EDH_DSS_DES_40_CBC_SHA "EXP-EDH-DSS-DES-CBC-SHA" +# define SSL3_TXT_EDH_DSS_DES_64_CBC_SHA "EDH-DSS-DES-CBC-SHA" +# define SSL3_TXT_EDH_DSS_DES_192_CBC3_SHA "EDH-DSS-DES-CBC3-SHA" +# define SSL3_TXT_EDH_RSA_DES_40_CBC_SHA "EXP-EDH-RSA-DES-CBC-SHA" +# define SSL3_TXT_EDH_RSA_DES_64_CBC_SHA "EDH-RSA-DES-CBC-SHA" +# define SSL3_TXT_EDH_RSA_DES_192_CBC3_SHA "EDH-RSA-DES-CBC3-SHA" + +# define SSL3_TXT_ADH_RC4_40_MD5 "EXP-ADH-RC4-MD5" +# define SSL3_TXT_ADH_RC4_128_MD5 "ADH-RC4-MD5" +# define SSL3_TXT_ADH_DES_40_CBC_SHA "EXP-ADH-DES-CBC-SHA" +# define SSL3_TXT_ADH_DES_64_CBC_SHA "ADH-DES-CBC-SHA" +# define SSL3_TXT_ADH_DES_192_CBC_SHA "ADH-DES-CBC3-SHA" + +# define SSL3_SSL_SESSION_ID_LENGTH 32 +# define SSL3_MAX_SSL_SESSION_ID_LENGTH 32 + +# define SSL3_MASTER_SECRET_SIZE 48 +# define SSL3_RANDOM_SIZE 32 +# define SSL3_SESSION_ID_SIZE 32 +# define SSL3_RT_HEADER_LENGTH 5 + +# define SSL3_HM_HEADER_LENGTH 4 + +# ifndef SSL3_ALIGN_PAYLOAD + /* + * Some will argue that this increases memory footprint, but it's not + * actually true. Point is that malloc has to return at least 64-bit aligned + * pointers, meaning that allocating 5 bytes wastes 3 bytes in either case. + * Suggested pre-gaping simply moves these wasted bytes from the end of + * allocated region to its front, but makes data payload aligned, which + * improves performance:-) + */ +# define SSL3_ALIGN_PAYLOAD 8 +# else +# if (SSL3_ALIGN_PAYLOAD&(SSL3_ALIGN_PAYLOAD-1))!=0 +# error "insane SSL3_ALIGN_PAYLOAD" +# undef SSL3_ALIGN_PAYLOAD +# endif +# endif + +/* + * This is the maximum MAC (digest) size used by the SSL library. Currently + * maximum of 20 is used by SHA1, but we reserve for future extension for + * 512-bit hashes. + */ + +# define SSL3_RT_MAX_MD_SIZE 64 + +/* + * Maximum block size used in all ciphersuites. Currently 16 for AES. + */ + +# define SSL_RT_MAX_CIPHER_BLOCK_SIZE 16 + +# define SSL3_RT_MAX_EXTRA (16384) + +/* Maximum plaintext length: defined by SSL/TLS standards */ +# define SSL3_RT_MAX_PLAIN_LENGTH 16384 +/* Maximum compression overhead: defined by SSL/TLS standards */ +# define SSL3_RT_MAX_COMPRESSED_OVERHEAD 1024 + +/* + * The standards give a maximum encryption overhead of 1024 bytes. In + * practice the value is lower than this. The overhead is the maximum number + * of padding bytes (256) plus the mac size. + */ +# define SSL3_RT_MAX_ENCRYPTED_OVERHEAD (256 + SSL3_RT_MAX_MD_SIZE) + +/* + * OpenSSL currently only uses a padding length of at most one block so the + * send overhead is smaller. + */ + +# define SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD \ + (SSL_RT_MAX_CIPHER_BLOCK_SIZE + SSL3_RT_MAX_MD_SIZE) + +/* If compression isn't used don't include the compression overhead */ + +# ifdef OPENSSL_NO_COMP +# define SSL3_RT_MAX_COMPRESSED_LENGTH SSL3_RT_MAX_PLAIN_LENGTH +# else +# define SSL3_RT_MAX_COMPRESSED_LENGTH \ + (SSL3_RT_MAX_PLAIN_LENGTH+SSL3_RT_MAX_COMPRESSED_OVERHEAD) +# endif +# define SSL3_RT_MAX_ENCRYPTED_LENGTH \ + (SSL3_RT_MAX_ENCRYPTED_OVERHEAD+SSL3_RT_MAX_COMPRESSED_LENGTH) +# define SSL3_RT_MAX_PACKET_SIZE \ + (SSL3_RT_MAX_ENCRYPTED_LENGTH+SSL3_RT_HEADER_LENGTH) + +# define SSL3_MD_CLIENT_FINISHED_CONST "\x43\x4C\x4E\x54" +# define SSL3_MD_SERVER_FINISHED_CONST "\x53\x52\x56\x52" + +# define SSL3_VERSION 0x0300 +# define SSL3_VERSION_MAJOR 0x03 +# define SSL3_VERSION_MINOR 0x00 + +# define SSL3_RT_CHANGE_CIPHER_SPEC 20 +# define SSL3_RT_ALERT 21 +# define SSL3_RT_HANDSHAKE 22 +# define SSL3_RT_APPLICATION_DATA 23 +# define DTLS1_RT_HEARTBEAT 24 + +/* Pseudo content types to indicate additional parameters */ +# define TLS1_RT_CRYPTO 0x1000 +# define TLS1_RT_CRYPTO_PREMASTER (TLS1_RT_CRYPTO | 0x1) +# define TLS1_RT_CRYPTO_CLIENT_RANDOM (TLS1_RT_CRYPTO | 0x2) +# define TLS1_RT_CRYPTO_SERVER_RANDOM (TLS1_RT_CRYPTO | 0x3) +# define TLS1_RT_CRYPTO_MASTER (TLS1_RT_CRYPTO | 0x4) + +# define TLS1_RT_CRYPTO_READ 0x0000 +# define TLS1_RT_CRYPTO_WRITE 0x0100 +# define TLS1_RT_CRYPTO_MAC (TLS1_RT_CRYPTO | 0x5) +# define TLS1_RT_CRYPTO_KEY (TLS1_RT_CRYPTO | 0x6) +# define TLS1_RT_CRYPTO_IV (TLS1_RT_CRYPTO | 0x7) +# define TLS1_RT_CRYPTO_FIXED_IV (TLS1_RT_CRYPTO | 0x8) + +/* Pseudo content type for SSL/TLS header info */ +# define SSL3_RT_HEADER 0x100 + +# define SSL3_AL_WARNING 1 +# define SSL3_AL_FATAL 2 + +# define SSL3_AD_CLOSE_NOTIFY 0 +# define SSL3_AD_UNEXPECTED_MESSAGE 10/* fatal */ +# define SSL3_AD_BAD_RECORD_MAC 20/* fatal */ +# define SSL3_AD_DECOMPRESSION_FAILURE 30/* fatal */ +# define SSL3_AD_HANDSHAKE_FAILURE 40/* fatal */ +# define SSL3_AD_NO_CERTIFICATE 41 +# define SSL3_AD_BAD_CERTIFICATE 42 +# define SSL3_AD_UNSUPPORTED_CERTIFICATE 43 +# define SSL3_AD_CERTIFICATE_REVOKED 44 +# define SSL3_AD_CERTIFICATE_EXPIRED 45 +# define SSL3_AD_CERTIFICATE_UNKNOWN 46 +# define SSL3_AD_ILLEGAL_PARAMETER 47/* fatal */ + +# define TLS1_HB_REQUEST 1 +# define TLS1_HB_RESPONSE 2 + + +# define SSL3_CT_RSA_SIGN 1 +# define SSL3_CT_DSS_SIGN 2 +# define SSL3_CT_RSA_FIXED_DH 3 +# define SSL3_CT_DSS_FIXED_DH 4 +# define SSL3_CT_RSA_EPHEMERAL_DH 5 +# define SSL3_CT_DSS_EPHEMERAL_DH 6 +# define SSL3_CT_FORTEZZA_DMS 20 +/* + * SSL3_CT_NUMBER is used to size arrays and it must be large enough to + * contain all of the cert types defined either for SSLv3 and TLSv1. + */ +# define SSL3_CT_NUMBER 9 + +# define SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS 0x0001 + +/* Removed from OpenSSL 1.1.0 */ +# define TLS1_FLAGS_TLS_PADDING_BUG 0x0 + +# define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010 + +/* Set if we encrypt then mac instead of usual mac then encrypt */ +# define TLS1_FLAGS_ENCRYPT_THEN_MAC_READ 0x0100 +# define TLS1_FLAGS_ENCRYPT_THEN_MAC TLS1_FLAGS_ENCRYPT_THEN_MAC_READ + +/* Set if extended master secret extension received from peer */ +# define TLS1_FLAGS_RECEIVED_EXTMS 0x0200 + +# define TLS1_FLAGS_ENCRYPT_THEN_MAC_WRITE 0x0400 + +# define SSL3_MT_HELLO_REQUEST 0 +# define SSL3_MT_CLIENT_HELLO 1 +# define SSL3_MT_SERVER_HELLO 2 +# define SSL3_MT_NEWSESSION_TICKET 4 +# define SSL3_MT_CERTIFICATE 11 +# define SSL3_MT_SERVER_KEY_EXCHANGE 12 +# define SSL3_MT_CERTIFICATE_REQUEST 13 +# define SSL3_MT_SERVER_DONE 14 +# define SSL3_MT_CERTIFICATE_VERIFY 15 +# define SSL3_MT_CLIENT_KEY_EXCHANGE 16 +# define SSL3_MT_FINISHED 20 +# define SSL3_MT_CERTIFICATE_STATUS 22 +# ifndef OPENSSL_NO_NEXTPROTONEG +# define SSL3_MT_NEXT_PROTO 67 +# endif +# define DTLS1_MT_HELLO_VERIFY_REQUEST 3 + +/* Dummy message type for handling CCS like a normal handshake message */ +# define SSL3_MT_CHANGE_CIPHER_SPEC 0x0101 + +# define SSL3_MT_CCS 1 + +/* These are used when changing over to a new cipher */ +# define SSL3_CC_READ 0x01 +# define SSL3_CC_WRITE 0x02 +# define SSL3_CC_CLIENT 0x10 +# define SSL3_CC_SERVER 0x20 +# define SSL3_CHANGE_CIPHER_CLIENT_WRITE (SSL3_CC_CLIENT|SSL3_CC_WRITE) +# define SSL3_CHANGE_CIPHER_SERVER_READ (SSL3_CC_SERVER|SSL3_CC_READ) +# define SSL3_CHANGE_CIPHER_CLIENT_READ (SSL3_CC_CLIENT|SSL3_CC_READ) +# define SSL3_CHANGE_CIPHER_SERVER_WRITE (SSL3_CC_SERVER|SSL3_CC_WRITE) + +#ifdef __cplusplus +} +#endif +#endif |