diff options
Diffstat (limited to 'openssl-1.1.0h/crypto/perlasm/cbc.pl')
| -rw-r--r-- | openssl-1.1.0h/crypto/perlasm/cbc.pl | 356 |
1 files changed, 356 insertions, 0 deletions
diff --git a/openssl-1.1.0h/crypto/perlasm/cbc.pl b/openssl-1.1.0h/crypto/perlasm/cbc.pl new file mode 100644 index 0000000..ad79b24 --- /dev/null +++ b/openssl-1.1.0h/crypto/perlasm/cbc.pl @@ -0,0 +1,356 @@ +#! /usr/bin/env perl +# Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. +# +# Licensed under the OpenSSL license (the "License"). You may not use +# this file except in compliance with the License. You can obtain a copy +# in the file LICENSE in the source distribution or at +# https://www.openssl.org/source/license.html + + +# void des_ncbc_encrypt(input, output, length, schedule, ivec, enc) +# des_cblock (*input); +# des_cblock (*output); +# long length; +# des_key_schedule schedule; +# des_cblock (*ivec); +# int enc; +# +# calls +# des_encrypt((DES_LONG *)tin,schedule,DES_ENCRYPT); +# + +#&cbc("des_ncbc_encrypt","des_encrypt",0); +#&cbc("BF_cbc_encrypt","BF_encrypt","BF_encrypt", +# 1,4,5,3,5,-1); +#&cbc("des_ncbc_encrypt","des_encrypt","des_encrypt", +# 0,4,5,3,5,-1); +#&cbc("des_ede3_cbc_encrypt","des_encrypt3","des_decrypt3", +# 0,6,7,3,4,5); +# +# When doing a cipher that needs bigendian order, +# for encrypt, the iv is kept in bigendian form, +# while for decrypt, it is kept in little endian. +sub cbc + { + local($name,$enc_func,$dec_func,$swap,$iv_off,$enc_off,$p1,$p2,$p3)=@_; + # name is the function name + # enc_func and dec_func and the functions to call for encrypt/decrypt + # swap is true if byte order needs to be reversed + # iv_off is parameter number for the iv + # enc_off is parameter number for the encrypt/decrypt flag + # p1,p2,p3 are the offsets for parameters to be passed to the + # underlying calls. + + &function_begin_B($name,""); + &comment(""); + + $in="esi"; + $out="edi"; + $count="ebp"; + + &push("ebp"); + &push("ebx"); + &push("esi"); + &push("edi"); + + $data_off=4; + $data_off+=4 if ($p1 > 0); + $data_off+=4 if ($p2 > 0); + $data_off+=4 if ($p3 > 0); + + &mov($count, &wparam(2)); # length + + &comment("getting iv ptr from parameter $iv_off"); + &mov("ebx", &wparam($iv_off)); # Get iv ptr + + &mov($in, &DWP(0,"ebx","",0));# iv[0] + &mov($out, &DWP(4,"ebx","",0));# iv[1] + + &push($out); + &push($in); + &push($out); # used in decrypt for iv[1] + &push($in); # used in decrypt for iv[0] + + &mov("ebx", "esp"); # This is the address of tin[2] + + &mov($in, &wparam(0)); # in + &mov($out, &wparam(1)); # out + + # We have loaded them all, how lets push things + &comment("getting encrypt flag from parameter $enc_off"); + &mov("ecx", &wparam($enc_off)); # Get enc flag + if ($p3 > 0) + { + &comment("get and push parameter $p3"); + if ($enc_off != $p3) + { &mov("eax", &wparam($p3)); &push("eax"); } + else { &push("ecx"); } + } + if ($p2 > 0) + { + &comment("get and push parameter $p2"); + if ($enc_off != $p2) + { &mov("eax", &wparam($p2)); &push("eax"); } + else { &push("ecx"); } + } + if ($p1 > 0) + { + &comment("get and push parameter $p1"); + if ($enc_off != $p1) + { &mov("eax", &wparam($p1)); &push("eax"); } + else { &push("ecx"); } + } + &push("ebx"); # push data/iv + + &cmp("ecx",0); + &jz(&label("decrypt")); + + &and($count,0xfffffff8); + &mov("eax", &DWP($data_off,"esp","",0)); # load iv[0] + &mov("ebx", &DWP($data_off+4,"esp","",0)); # load iv[1] + + &jz(&label("encrypt_finish")); + + ############################################################# + + &set_label("encrypt_loop"); + # encrypt start + # "eax" and "ebx" hold iv (or the last cipher text) + + &mov("ecx", &DWP(0,$in,"",0)); # load first 4 bytes + &mov("edx", &DWP(4,$in,"",0)); # second 4 bytes + + &xor("eax", "ecx"); + &xor("ebx", "edx"); + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov(&DWP($data_off,"esp","",0), "eax"); # put in array for call + &mov(&DWP($data_off+4,"esp","",0), "ebx"); # + + &call($enc_func); + + &mov("eax", &DWP($data_off,"esp","",0)); + &mov("ebx", &DWP($data_off+4,"esp","",0)); + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov(&DWP(0,$out,"",0),"eax"); + &mov(&DWP(4,$out,"",0),"ebx"); + + # eax and ebx are the next iv. + + &add($in, 8); + &add($out, 8); + + &sub($count, 8); + &jnz(&label("encrypt_loop")); + +###################################################################3 + &set_label("encrypt_finish"); + &mov($count, &wparam(2)); # length + &and($count, 7); + &jz(&label("finish")); + &call(&label("PIC_point")); +&set_label("PIC_point"); + &blindpop("edx"); + &lea("ecx",&DWP(&label("cbc_enc_jmp_table")."-".&label("PIC_point"),"edx")); + &mov($count,&DWP(0,"ecx",$count,4)); + &add($count,"edx"); + &xor("ecx","ecx"); + &xor("edx","edx"); + #&mov($count,&DWP(&label("cbc_enc_jmp_table"),"",$count,4)); + &jmp_ptr($count); + +&set_label("ej7"); + &movb(&HB("edx"), &BP(6,$in,"",0)); + &shl("edx",8); +&set_label("ej6"); + &movb(&HB("edx"), &BP(5,$in,"",0)); +&set_label("ej5"); + &movb(&LB("edx"), &BP(4,$in,"",0)); +&set_label("ej4"); + &mov("ecx", &DWP(0,$in,"",0)); + &jmp(&label("ejend")); +&set_label("ej3"); + &movb(&HB("ecx"), &BP(2,$in,"",0)); + &shl("ecx",8); +&set_label("ej2"); + &movb(&HB("ecx"), &BP(1,$in,"",0)); +&set_label("ej1"); + &movb(&LB("ecx"), &BP(0,$in,"",0)); +&set_label("ejend"); + + &xor("eax", "ecx"); + &xor("ebx", "edx"); + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov(&DWP($data_off,"esp","",0), "eax"); # put in array for call + &mov(&DWP($data_off+4,"esp","",0), "ebx"); # + + &call($enc_func); + + &mov("eax", &DWP($data_off,"esp","",0)); + &mov("ebx", &DWP($data_off+4,"esp","",0)); + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov(&DWP(0,$out,"",0),"eax"); + &mov(&DWP(4,$out,"",0),"ebx"); + + &jmp(&label("finish")); + + ############################################################# + ############################################################# + &set_label("decrypt",1); + # decrypt start + &and($count,0xfffffff8); + # The next 2 instructions are only for if the jz is taken + &mov("eax", &DWP($data_off+8,"esp","",0)); # get iv[0] + &mov("ebx", &DWP($data_off+12,"esp","",0)); # get iv[1] + &jz(&label("decrypt_finish")); + + &set_label("decrypt_loop"); + &mov("eax", &DWP(0,$in,"",0)); # load first 4 bytes + &mov("ebx", &DWP(4,$in,"",0)); # second 4 bytes + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov(&DWP($data_off,"esp","",0), "eax"); # put back + &mov(&DWP($data_off+4,"esp","",0), "ebx"); # + + &call($dec_func); + + &mov("eax", &DWP($data_off,"esp","",0)); # get return + &mov("ebx", &DWP($data_off+4,"esp","",0)); # + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov("ecx", &DWP($data_off+8,"esp","",0)); # get iv[0] + &mov("edx", &DWP($data_off+12,"esp","",0)); # get iv[1] + + &xor("ecx", "eax"); + &xor("edx", "ebx"); + + &mov("eax", &DWP(0,$in,"",0)); # get old cipher text, + &mov("ebx", &DWP(4,$in,"",0)); # next iv actually + + &mov(&DWP(0,$out,"",0),"ecx"); + &mov(&DWP(4,$out,"",0),"edx"); + + &mov(&DWP($data_off+8,"esp","",0), "eax"); # save iv + &mov(&DWP($data_off+12,"esp","",0), "ebx"); # + + &add($in, 8); + &add($out, 8); + + &sub($count, 8); + &jnz(&label("decrypt_loop")); +############################ ENDIT #######################3 + &set_label("decrypt_finish"); + &mov($count, &wparam(2)); # length + &and($count, 7); + &jz(&label("finish")); + + &mov("eax", &DWP(0,$in,"",0)); # load first 4 bytes + &mov("ebx", &DWP(4,$in,"",0)); # second 4 bytes + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov(&DWP($data_off,"esp","",0), "eax"); # put back + &mov(&DWP($data_off+4,"esp","",0), "ebx"); # + + &call($dec_func); + + &mov("eax", &DWP($data_off,"esp","",0)); # get return + &mov("ebx", &DWP($data_off+4,"esp","",0)); # + + &bswap("eax") if $swap; + &bswap("ebx") if $swap; + + &mov("ecx", &DWP($data_off+8,"esp","",0)); # get iv[0] + &mov("edx", &DWP($data_off+12,"esp","",0)); # get iv[1] + + &xor("ecx", "eax"); + &xor("edx", "ebx"); + + # this is for when we exit + &mov("eax", &DWP(0,$in,"",0)); # get old cipher text, + &mov("ebx", &DWP(4,$in,"",0)); # next iv actually + +&set_label("dj7"); + &rotr("edx", 16); + &movb(&BP(6,$out,"",0), &LB("edx")); + &shr("edx",16); +&set_label("dj6"); + &movb(&BP(5,$out,"",0), &HB("edx")); +&set_label("dj5"); + &movb(&BP(4,$out,"",0), &LB("edx")); +&set_label("dj4"); + &mov(&DWP(0,$out,"",0), "ecx"); + &jmp(&label("djend")); +&set_label("dj3"); + &rotr("ecx", 16); + &movb(&BP(2,$out,"",0), &LB("ecx")); + &shl("ecx",16); +&set_label("dj2"); + &movb(&BP(1,$in,"",0), &HB("ecx")); +&set_label("dj1"); + &movb(&BP(0,$in,"",0), &LB("ecx")); +&set_label("djend"); + + # final iv is still in eax:ebx + &jmp(&label("finish")); + + +############################ FINISH #######################3 + &set_label("finish",1); + &mov("ecx", &wparam($iv_off)); # Get iv ptr + + ################################################# + $total=16+4; + $total+=4 if ($p1 > 0); + $total+=4 if ($p2 > 0); + $total+=4 if ($p3 > 0); + &add("esp",$total); + + &mov(&DWP(0,"ecx","",0), "eax"); # save iv + &mov(&DWP(4,"ecx","",0), "ebx"); # save iv + + &function_end_A($name); + + &align(64); + &set_label("cbc_enc_jmp_table"); + &data_word("0"); + &data_word(&label("ej1")."-".&label("PIC_point")); + &data_word(&label("ej2")."-".&label("PIC_point")); + &data_word(&label("ej3")."-".&label("PIC_point")); + &data_word(&label("ej4")."-".&label("PIC_point")); + &data_word(&label("ej5")."-".&label("PIC_point")); + &data_word(&label("ej6")."-".&label("PIC_point")); + &data_word(&label("ej7")."-".&label("PIC_point")); + # not used + #&set_label("cbc_dec_jmp_table",1); + #&data_word("0"); + #&data_word(&label("dj1")."-".&label("PIC_point")); + #&data_word(&label("dj2")."-".&label("PIC_point")); + #&data_word(&label("dj3")."-".&label("PIC_point")); + #&data_word(&label("dj4")."-".&label("PIC_point")); + #&data_word(&label("dj5")."-".&label("PIC_point")); + #&data_word(&label("dj6")."-".&label("PIC_point")); + #&data_word(&label("dj7")."-".&label("PIC_point")); + &align(64); + + &function_end_B($name); + + } + +1; |