1 files changed, 326 insertions, 0 deletions
diff --git a/openssl-1.1.0h/crypto/chacha/asm/chacha-s390x.pl b/openssl-1.1.0h/crypto/chacha/asm/chacha-s390x.pl
new file mode 100755
index 0000000..c315264
--- /dev/null
+++ b/openssl-1.1.0h/crypto/chacha/asm/chacha-s390x.pl
@@ -0,0 +1,326 @@
+#! /usr/bin/env perl
+# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# December 2015
+#
+# ChaCha20 for s390x.
+#
+# 3 times faster than compiler-generated code.
+
+$flavour = shift;
+
+if ($flavour =~ /3[12]/) {
+	$SIZE_T=4;
+	$g="";
+} else {
+	$SIZE_T=8;
+	$g="g";
+}
+
+while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
+open STDOUT,">$output";
+
+sub AUTOLOAD()		# thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://;
+    $code .= "\t$opcode\t".join(',',@_)."\n";
+}
+
+my $sp="%r15";
+
+my $stdframe=16*$SIZE_T+4*8;
+my $frame=$stdframe+4*20;
+
+my ($out,$inp,$len,$key,$counter)=map("%r$_",(2..6));
+
+my @x=map("%r$_",(0..7,"x","x","x","x",(10..13)));
+my @t=map("%r$_",(8,9));
+
+sub ROUND {
+my ($a0,$b0,$c0,$d0)=@_;
+my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
+my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
+my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
+my ($xc,$xc_)=map("\"$_\"",@t);
+my @x=map("\"$_\"",@x);
+
+	# Consider order in which variables are addressed by their
+	# index:
+	#
+	#	a   b   c   d
+	#
+	#	0   4   8  12 < even round
+	#	1   5   9  13
+	#	2   6  10  14
+	#	3   7  11  15
+	#	0   5  10  15 < odd round
+	#	1   6  11  12
+	#	2   7   8  13
+	#	3   4   9  14
+	#
+	# 'a', 'b' and 'd's are permanently allocated in registers,
+	# @x[0..7,12..15], while 'c's are maintained in memory. If
+	# you observe 'c' column, you'll notice that pair of 'c's is
+	# invariant between rounds. This means that we have to reload
+	# them once per round, in the middle. This is why you'll see
+	# 'c' stores and loads in the middle, but none in the beginning
+	# or end.
+
+	(
+	"&alr	(@x[$a0],@x[$b0])",	# Q1
+	 "&alr	(@x[$a1],@x[$b1])",	# Q2
+	"&xr	(@x[$d0],@x[$a0])",
+	 "&xr	(@x[$d1],@x[$a1])",
+	"&rll	(@x[$d0],@x[$d0],16)",
+	 "&rll	(@x[$d1],@x[$d1],16)",
+
+	"&alr	($xc,@x[$d0])",
+	 "&alr	($xc_,@x[$d1])",
+	"&xr	(@x[$b0],$xc)",
+	 "&xr	(@x[$b1],$xc_)",
+	"&rll	(@x[$b0],@x[$b0],12)",
+	 "&rll	(@x[$b1],@x[$b1],12)",
+
+	"&alr	(@x[$a0],@x[$b0])",
+	 "&alr	(@x[$a1],@x[$b1])",
+	"&xr	(@x[$d0],@x[$a0])",
+	 "&xr	(@x[$d1],@x[$a1])",
+	"&rll	(@x[$d0],@x[$d0],8)",
+	 "&rll	(@x[$d1],@x[$d1],8)",
+
+	"&alr	($xc,@x[$d0])",
+	 "&alr	($xc_,@x[$d1])",
+	"&xr	(@x[$b0],$xc)",
+	 "&xr	(@x[$b1],$xc_)",
+	"&rll	(@x[$b0],@x[$b0],7)",
+	 "&rll	(@x[$b1],@x[$b1],7)",
+
+	"&stm	($xc,$xc_,'$stdframe+4*8+4*$c0($sp)')",	# reload pair of 'c's
+	"&lm	($xc,$xc_,'$stdframe+4*8+4*$c2($sp)')",
+
+	"&alr	(@x[$a2],@x[$b2])",	# Q3
+	 "&alr	(@x[$a3],@x[$b3])",	# Q4
+	"&xr	(@x[$d2],@x[$a2])",
+	 "&xr	(@x[$d3],@x[$a3])",
+	"&rll	(@x[$d2],@x[$d2],16)",
+	 "&rll	(@x[$d3],@x[$d3],16)",
+
+	"&alr	($xc,@x[$d2])",
+	 "&alr	($xc_,@x[$d3])",
+	"&xr	(@x[$b2],$xc)",
+	 "&xr	(@x[$b3],$xc_)",
+	"&rll	(@x[$b2],@x[$b2],12)",
+	 "&rll	(@x[$b3],@x[$b3],12)",
+
+	"&alr	(@x[$a2],@x[$b2])",
+	 "&alr	(@x[$a3],@x[$b3])",
+	"&xr	(@x[$d2],@x[$a2])",
+	 "&xr	(@x[$d3],@x[$a3])",
+	"&rll	(@x[$d2],@x[$d2],8)",
+	 "&rll	(@x[$d3],@x[$d3],8)",
+
+	"&alr	($xc,@x[$d2])",
+	 "&alr	($xc_,@x[$d3])",
+	"&xr	(@x[$b2],$xc)",
+	 "&xr	(@x[$b3],$xc_)",
+	"&rll	(@x[$b2],@x[$b2],7)",
+	 "&rll	(@x[$b3],@x[$b3],7)"
+	);
+}
+
+$code.=<<___;
+.text
+
+.globl	ChaCha20_ctr32
+.type	ChaCha20_ctr32,\@function
+.align	32
+ChaCha20_ctr32:
+	lt${g}r	$len,$len			# $len==0?
+	bzr	%r14
+	a${g}hi	$len,-64
+	l${g}hi	%r1,-$frame
+	stm${g}	%r6,%r15,`6*$SIZE_T`($sp)
+	sl${g}r	$out,$inp			# difference
+	la	$len,0($inp,$len)		# end of input minus 64
+	larl	%r7,.Lsigma
+	lgr	%r0,$sp
+	la	$sp,0(%r1,$sp)
+	st${g}	%r0,0($sp)
+
+	lmg	%r8,%r11,0($key)		# load key
+	lmg	%r12,%r13,0($counter)		# load counter
+	lmg	%r6,%r7,0(%r7)			# load sigma constant
+
+	la	%r14,0($inp)
+	st${g}	$out,$frame+3*$SIZE_T($sp)
+	st${g}	$len,$frame+4*$SIZE_T($sp)
+	stmg	%r6,%r13,$stdframe($sp)		# copy key schedule to stack
+	srlg	@x[12],%r12,32			# 32-bit counter value
+	j	.Loop_outer
+
+.align	16
+.Loop_outer:
+	lm	@x[0],@x[7],$stdframe+4*0($sp)		# load x[0]-x[7]
+	lm	@t[0],@t[1],$stdframe+4*10($sp)		# load x[10]-x[11]
+	lm	@x[13],@x[15],$stdframe+4*13($sp)	# load x[13]-x[15]
+	stm	@t[0],@t[1],$stdframe+4*8+4*10($sp)	# offload x[10]-x[11]
+	lm	@t[0],@t[1],$stdframe+4*8($sp)		# load x[8]-x[9]
+	st	@x[12],$stdframe+4*12($sp)		# save counter
+	st${g}	%r14,$frame+2*$SIZE_T($sp)		# save input pointer
+	lhi	%r14,10
+	j	.Loop
+
+.align	4
+.Loop:
+___
+	foreach (&ROUND(0, 4, 8,12)) { eval; }
+	foreach (&ROUND(0, 5,10,15)) { eval; }
+$code.=<<___;
+	brct	%r14,.Loop
+
+	l${g}	%r14,$frame+2*$SIZE_T($sp)		# pull input pointer
+	stm	@t[0],@t[1],$stdframe+4*8+4*8($sp)	# offload x[8]-x[9]
+	lm${g}	@t[0],@t[1],$frame+3*$SIZE_T($sp)
+
+	al	@x[0],$stdframe+4*0($sp)	# accumulate key schedule
+	al	@x[1],$stdframe+4*1($sp)
+	al	@x[2],$stdframe+4*2($sp)
+	al	@x[3],$stdframe+4*3($sp)
+	al	@x[4],$stdframe+4*4($sp)
+	al	@x[5],$stdframe+4*5($sp)
+	al	@x[6],$stdframe+4*6($sp)
+	al	@x[7],$stdframe+4*7($sp)
+	lrvr	@x[0],@x[0]
+	lrvr	@x[1],@x[1]
+	lrvr	@x[2],@x[2]
+	lrvr	@x[3],@x[3]
+	lrvr	@x[4],@x[4]
+	lrvr	@x[5],@x[5]
+	lrvr	@x[6],@x[6]
+	lrvr	@x[7],@x[7]
+	al	@x[12],$stdframe+4*12($sp)
+	al	@x[13],$stdframe+4*13($sp)
+	al	@x[14],$stdframe+4*14($sp)
+	al	@x[15],$stdframe+4*15($sp)
+	lrvr	@x[12],@x[12]
+	lrvr	@x[13],@x[13]
+	lrvr	@x[14],@x[14]
+	lrvr	@x[15],@x[15]
+
+	la	@t[0],0(@t[0],%r14)		# reconstruct output pointer
+	cl${g}r	%r14,@t[1]
+	jh	.Ltail
+
+	x	@x[0],4*0(%r14)			# xor with input
+	x	@x[1],4*1(%r14)
+	st	@x[0],4*0(@t[0])		# store output
+	x	@x[2],4*2(%r14)
+	st	@x[1],4*1(@t[0])
+	x	@x[3],4*3(%r14)
+	st	@x[2],4*2(@t[0])
+	x	@x[4],4*4(%r14)
+	st	@x[3],4*3(@t[0])
+	 lm	@x[0],@x[3],$stdframe+4*8+4*8($sp)	# load x[8]-x[11]
+	x	@x[5],4*5(%r14)
+	st	@x[4],4*4(@t[0])
+	x	@x[6],4*6(%r14)
+	 al	@x[0],$stdframe+4*8($sp)
+	st	@x[5],4*5(@t[0])
+	x	@x[7],4*7(%r14)
+	 al	@x[1],$stdframe+4*9($sp)
+	st	@x[6],4*6(@t[0])
+	x	@x[12],4*12(%r14)
+	 al	@x[2],$stdframe+4*10($sp)
+	st	@x[7],4*7(@t[0])
+	x	@x[13],4*13(%r14)
+	 al	@x[3],$stdframe+4*11($sp)
+	st	@x[12],4*12(@t[0])
+	x	@x[14],4*14(%r14)
+	st	@x[13],4*13(@t[0])
+	x	@x[15],4*15(%r14)
+	st	@x[14],4*14(@t[0])
+	 lrvr	@x[0],@x[0]
+	st	@x[15],4*15(@t[0])
+	 lrvr	@x[1],@x[1]
+	 lrvr	@x[2],@x[2]
+	 lrvr	@x[3],@x[3]
+	lhi	@x[12],1
+	 x	@x[0],4*8(%r14)
+	al	@x[12],$stdframe+4*12($sp)	# increment counter
+	 x	@x[1],4*9(%r14)
+	 st	@x[0],4*8(@t[0])
+	 x	@x[2],4*10(%r14)
+	 st	@x[1],4*9(@t[0])
+	 x	@x[3],4*11(%r14)
+	 st	@x[2],4*10(@t[0])
+	 st	@x[3],4*11(@t[0])
+
+	cl${g}r	%r14,@t[1]			# done yet?
+	la	%r14,64(%r14)
+	jl	.Loop_outer
+
+.Ldone:
+	xgr	%r0,%r0
+	xgr	%r1,%r1
+	xgr	%r2,%r2
+	xgr	%r3,%r3
+	stmg	%r0,%r3,$stdframe+4*4($sp)	# wipe key copy
+	stmg	%r0,%r3,$stdframe+4*12($sp)
+
+	lm${g}	%r6,%r15,`$frame+6*$SIZE_T`($sp)
+	br	%r14
+
+.align	16
+.Ltail:
+	la	@t[1],64($t[1])
+	stm	@x[0],@x[7],$stdframe+4*0($sp)
+	sl${g}r	@t[1],%r14
+	lm	@x[0],@x[3],$stdframe+4*8+4*8($sp)
+	l${g}hi	@x[6],0
+	stm	@x[12],@x[15],$stdframe+4*12($sp)
+	al	@x[0],$stdframe+4*8($sp)
+	al	@x[1],$stdframe+4*9($sp)
+	al	@x[2],$stdframe+4*10($sp)
+	al	@x[3],$stdframe+4*11($sp)
+	lrvr	@x[0],@x[0]
+	lrvr	@x[1],@x[1]
+	lrvr	@x[2],@x[2]
+	lrvr	@x[3],@x[3]
+	stm	@x[0],@x[3],$stdframe+4*8($sp)
+
+.Loop_tail:
+	llgc	@x[4],0(@x[6],%r14)
+	llgc	@x[5],$stdframe(@x[6],$sp)
+	xr	@x[5],@x[4]
+	stc	@x[5],0(@x[6],@t[0])
+	la	@x[6],1(@x[6])
+	brct	@t[1],.Loop_tail
+
+	j	.Ldone
+.size	ChaCha20_ctr32,.-ChaCha20_ctr32
+
+.align	32
+.Lsigma:
+.long	0x61707865,0x3320646e,0x79622d32,0x6b206574	# endian-neutral
+.asciz	"ChaCha20 for s390x, CRYPTOGAMS by <appro\@openssl.org>"
+.align	4
+___
+
+foreach (split("\n",$code)) {
+	s/\`([^\`]*)\`/eval $1/ge;
+
+	print $_,"\n";
+}
+close STDOUT;