aboutsummaryrefslogtreecommitdiff
path: root/openssl-1.1.0h/crypto/aes/asm/aesni-sha1-x86_64.pl
diff options
context:
space:
mode:
Diffstat (limited to 'openssl-1.1.0h/crypto/aes/asm/aesni-sha1-x86_64.pl')
-rw-r--r--openssl-1.1.0h/crypto/aes/asm/aesni-sha1-x86_64.pl2072
1 files changed, 2072 insertions, 0 deletions
diff --git a/openssl-1.1.0h/crypto/aes/asm/aesni-sha1-x86_64.pl b/openssl-1.1.0h/crypto/aes/asm/aesni-sha1-x86_64.pl
new file mode 100644
index 0000000..33a7f0c
--- /dev/null
+++ b/openssl-1.1.0h/crypto/aes/asm/aesni-sha1-x86_64.pl
@@ -0,0 +1,2072 @@
+#! /usr/bin/env perl
+# Copyright 2011-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# June 2011
+#
+# This is AESNI-CBC+SHA1 "stitch" implementation. The idea, as spelled
+# in http://download.intel.com/design/intarch/papers/323686.pdf, is
+# that since AESNI-CBC encrypt exhibit *very* low instruction-level
+# parallelism, interleaving it with another algorithm would allow to
+# utilize processor resources better and achieve better performance.
+# SHA1 instruction sequences(*) are taken from sha1-x86_64.pl and
+# AESNI code is weaved into it. Below are performance numbers in
+# cycles per processed byte, less is better, for standalone AESNI-CBC
+# encrypt, sum of the latter and standalone SHA1, and "stitched"
+# subroutine:
+#
+# AES-128-CBC +SHA1 stitch gain
+# Westmere 3.77[+5.3] 9.07 6.55 +38%
+# Sandy Bridge 5.05[+5.0(6.1)] 10.06(11.15) 5.98(7.05) +68%(+58%)
+# Ivy Bridge 5.05[+4.6] 9.65 5.54 +74%
+# Haswell 4.43[+3.6(4.2)] 8.00(8.58) 4.55(5.21) +75%(+65%)
+# Skylake 2.63[+3.5(4.1)] 6.17(6.69) 4.23(4.44) +46%(+51%)
+# Bulldozer 5.77[+6.0] 11.72 6.37 +84%
+# Ryzen(**) 2.71[+1.93] 4.64 2.74 +69%
+# Goldmont(**) 3.82[+1.70] 5.52 4.20 +31%
+#
+# AES-192-CBC
+# Westmere 4.51 9.81 6.80 +44%
+# Sandy Bridge 6.05 11.06(12.15) 6.11(7.19) +81%(+69%)
+# Ivy Bridge 6.05 10.65 6.07 +75%
+# Haswell 5.29 8.86(9.44) 5.32(5.32) +67%(+77%)
+# Bulldozer 6.89 12.84 6.96 +84%
+#
+# AES-256-CBC
+# Westmere 5.25 10.55 7.21 +46%
+# Sandy Bridge 7.05 12.06(13.15) 7.12(7.72) +69%(+70%)
+# Ivy Bridge 7.05 11.65 7.12 +64%
+# Haswell 6.19 9.76(10.34) 6.21(6.25) +57%(+65%)
+# Skylake 3.62 7.16(7.68) 4.56(4.76) +57%(+61%)
+# Bulldozer 8.00 13.95 8.25 +69%
+# Ryzen(**) 3.71 5.64 3.72 +52%
+# Goldmont(**) 5.35 7.05 5.76 +22%
+#
+# (*) There are two code paths: SSSE3 and AVX. See sha1-568.pl for
+# background information. Above numbers in parentheses are SSSE3
+# results collected on AVX-capable CPU, i.e. apply on OSes that
+# don't support AVX.
+# (**) SHAEXT results.
+#
+# Needless to mention that it makes no sense to implement "stitched"
+# *decrypt* subroutine. Because *both* AESNI-CBC decrypt and SHA1
+# fully utilize parallelism, so stitching would not give any gain
+# anyway. Well, there might be some, e.g. because of better cache
+# locality... For reference, here are performance results for
+# standalone AESNI-CBC decrypt:
+#
+# AES-128-CBC AES-192-CBC AES-256-CBC
+# Westmere 1.25 1.50 1.75
+# Sandy Bridge 0.74 0.91 1.09
+# Ivy Bridge 0.74 0.90 1.11
+# Haswell 0.63 0.76 0.88
+# Bulldozer 0.70 0.85 0.99
+
+# And indeed:
+#
+# AES-256-CBC +SHA1 stitch gain
+# Westmere 1.75 7.20 6.68 +7.8%
+# Sandy Bridge 1.09 6.09(7.22) 5.82(6.95) +4.6%(+3.9%)
+# Ivy Bridge 1.11 5.70 5.45 +4.6%
+# Haswell 0.88 4.45(5.00) 4.39(4.69) +1.4%(*)(+6.6%)
+# Bulldozer 0.99 6.95 5.95 +17%(**)
+#
+# (*) Tiny improvement coefficient on Haswell is because we compare
+# AVX1 stitch to sum with AVX2 SHA1.
+# (**) Execution is fully dominated by integer code sequence and
+# SIMD still hardly shows [in single-process benchmark;-]
+
+$flavour = shift;
+$output = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+$avx=1 if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
+ =~ /GNU assembler version ([2-9]\.[0-9]+)/ &&
+ $1>=2.19);
+$avx=1 if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) &&
+ `nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)/ &&
+ $1>=2.09);
+$avx=1 if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) &&
+ `ml64 2>&1` =~ /Version ([0-9]+)\./ &&
+ $1>=10);
+$avx=1 if (!$avx && `$ENV{CC} -v 2>&1` =~ /((?:^clang|LLVM) version|.*based on LLVM) ([3-9]\.[0-9]+)/ && $2>=3.0);
+
+$shaext=1; ### set to zero if compiling for 1.0.1
+
+$stitched_decrypt=0;
+
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+*STDOUT=*OUT;
+
+# void aesni_cbc_sha1_enc(const void *inp,
+# void *out,
+# size_t length,
+# const AES_KEY *key,
+# unsigned char *iv,
+# SHA_CTX *ctx,
+# const void *in0);
+
+$code.=<<___;
+.text
+.extern OPENSSL_ia32cap_P
+
+.globl aesni_cbc_sha1_enc
+.type aesni_cbc_sha1_enc,\@abi-omnipotent
+.align 32
+aesni_cbc_sha1_enc:
+ # caller should check for SSSE3 and AES-NI bits
+ mov OPENSSL_ia32cap_P+0(%rip),%r10d
+ mov OPENSSL_ia32cap_P+4(%rip),%r11
+___
+$code.=<<___ if ($shaext);
+ bt \$61,%r11 # check SHA bit
+ jc aesni_cbc_sha1_enc_shaext
+___
+$code.=<<___ if ($avx);
+ and \$`1<<28`,%r11d # mask AVX bit
+ and \$`1<<30`,%r10d # mask "Intel CPU" bit
+ or %r11d,%r10d
+ cmp \$`1<<28|1<<30`,%r10d
+ je aesni_cbc_sha1_enc_avx
+___
+$code.=<<___;
+ jmp aesni_cbc_sha1_enc_ssse3
+ ret
+.size aesni_cbc_sha1_enc,.-aesni_cbc_sha1_enc
+___
+
+my ($in0,$out,$len,$key,$ivp,$ctx,$inp)=("%rdi","%rsi","%rdx","%rcx","%r8","%r9","%r10");
+
+my $Xi=4;
+my @X=map("%xmm$_",(4..7,0..3));
+my @Tx=map("%xmm$_",(8..10));
+my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization
+my @T=("%esi","%edi");
+my $j=0; my $jj=0; my $r=0; my $sn=0; my $rx=0;
+my $K_XX_XX="%r11";
+my ($rndkey0,$iv,$in)=map("%xmm$_",(11..13)); # for enc
+my @rndkey=("%xmm14","%xmm15"); # for enc
+my ($inout0,$inout1,$inout2,$inout3)=map("%xmm$_",(12..15)); # for dec
+
+if (1) { # reassign for Atom Silvermont
+ # The goal is to minimize amount of instructions with more than
+ # 3 prefix bytes. Or in more practical terms to keep AES-NI *and*
+ # SSSE3 instructions to upper half of the register bank.
+ @X=map("%xmm$_",(8..11,4..7));
+ @Tx=map("%xmm$_",(12,13,3));
+ ($iv,$in,$rndkey0)=map("%xmm$_",(2,14,15));
+ @rndkey=("%xmm0","%xmm1");
+}
+
+sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://;
+ my $arg = pop;
+ $arg = "\$$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',$arg,reverse @_)."\n";
+}
+
+my $_rol=sub { &rol(@_) };
+my $_ror=sub { &ror(@_) };
+
+$code.=<<___;
+.type aesni_cbc_sha1_enc_ssse3,\@function,6
+.align 32
+aesni_cbc_sha1_enc_ssse3:
+ mov `($win64?56:8)`(%rsp),$inp # load 7th argument
+ #shr \$6,$len # debugging artefact
+ #jz .Lepilogue_ssse3 # debugging artefact
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ lea `-104-($win64?10*16:0)`(%rsp),%rsp
+ #mov $in0,$inp # debugging artefact
+ #lea 64(%rsp),$ctx # debugging artefact
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,96+0(%rsp)
+ movaps %xmm7,96+16(%rsp)
+ movaps %xmm8,96+32(%rsp)
+ movaps %xmm9,96+48(%rsp)
+ movaps %xmm10,96+64(%rsp)
+ movaps %xmm11,96+80(%rsp)
+ movaps %xmm12,96+96(%rsp)
+ movaps %xmm13,96+112(%rsp)
+ movaps %xmm14,96+128(%rsp)
+ movaps %xmm15,96+144(%rsp)
+.Lprologue_ssse3:
+___
+$code.=<<___;
+ mov $in0,%r12 # reassign arguments
+ mov $out,%r13
+ mov $len,%r14
+ lea 112($key),%r15 # size optimization
+ movdqu ($ivp),$iv # load IV
+ mov $ivp,88(%rsp) # save $ivp
+___
+($in0,$out,$len,$key)=map("%r$_",(12..15)); # reassign arguments
+my $rounds="${ivp}d";
+$code.=<<___;
+ shl \$6,$len
+ sub $in0,$out
+ mov 240-112($key),$rounds
+ add $inp,$len # end of input
+
+ lea K_XX_XX(%rip),$K_XX_XX
+ mov 0($ctx),$A # load context
+ mov 4($ctx),$B
+ mov 8($ctx),$C
+ mov 12($ctx),$D
+ mov $B,@T[0] # magic seed
+ mov 16($ctx),$E
+ mov $C,@T[1]
+ xor $D,@T[1]
+ and @T[1],@T[0]
+
+ movdqa 64($K_XX_XX),@Tx[2] # pbswap mask
+ movdqa 0($K_XX_XX),@Tx[1] # K_00_19
+ movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
+ movdqu 16($inp),@X[-3&7]
+ movdqu 32($inp),@X[-2&7]
+ movdqu 48($inp),@X[-1&7]
+ pshufb @Tx[2],@X[-4&7] # byte swap
+ pshufb @Tx[2],@X[-3&7]
+ pshufb @Tx[2],@X[-2&7]
+ add \$64,$inp
+ paddd @Tx[1],@X[-4&7] # add K_00_19
+ pshufb @Tx[2],@X[-1&7]
+ paddd @Tx[1],@X[-3&7]
+ paddd @Tx[1],@X[-2&7]
+ movdqa @X[-4&7],0(%rsp) # X[]+K xfer to IALU
+ psubd @Tx[1],@X[-4&7] # restore X[]
+ movdqa @X[-3&7],16(%rsp)
+ psubd @Tx[1],@X[-3&7]
+ movdqa @X[-2&7],32(%rsp)
+ psubd @Tx[1],@X[-2&7]
+ movups -112($key),$rndkey0 # $key[0]
+ movups 16-112($key),$rndkey[0] # forward reference
+ jmp .Loop_ssse3
+___
+
+my $aesenc=sub {
+ use integer;
+ my ($n,$k)=($r/10,$r%10);
+ if ($k==0) {
+ $code.=<<___;
+ movups `16*$n`($in0),$in # load input
+ xorps $rndkey0,$in
+___
+ $code.=<<___ if ($n);
+ movups $iv,`16*($n-1)`($out,$in0) # write output
+___
+ $code.=<<___;
+ xorps $in,$iv
+ movups `32+16*$k-112`($key),$rndkey[1]
+ aesenc $rndkey[0],$iv
+___
+ } elsif ($k==9) {
+ $sn++;
+ $code.=<<___;
+ cmp \$11,$rounds
+ jb .Laesenclast$sn
+ movups `32+16*($k+0)-112`($key),$rndkey[1]
+ aesenc $rndkey[0],$iv
+ movups `32+16*($k+1)-112`($key),$rndkey[0]
+ aesenc $rndkey[1],$iv
+ je .Laesenclast$sn
+ movups `32+16*($k+2)-112`($key),$rndkey[1]
+ aesenc $rndkey[0],$iv
+ movups `32+16*($k+3)-112`($key),$rndkey[0]
+ aesenc $rndkey[1],$iv
+.Laesenclast$sn:
+ aesenclast $rndkey[0],$iv
+ movups 16-112($key),$rndkey[1] # forward reference
+___
+ } else {
+ $code.=<<___;
+ movups `32+16*$k-112`($key),$rndkey[1]
+ aesenc $rndkey[0],$iv
+___
+ }
+ $r++; unshift(@rndkey,pop(@rndkey));
+};
+
+sub Xupdate_ssse3_16_31() # recall that $Xi starts with 4
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns)); # ror
+ &pshufd (@X[0],@X[-4&7],0xee); # was &movdqa (@X[0],@X[-3&7]);
+ eval(shift(@insns));
+ &movdqa (@Tx[0],@X[-1&7]);
+ &paddd (@Tx[1],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &punpcklqdq(@X[0],@X[-3&7]); # compose "X[-14]" in "X[0]", was &palignr(@X[0],@X[-4&7],8);
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ &psrldq (@Tx[0],4); # "X[-3]", 3 dwords
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ &pxor (@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &movdqa (@Tx[2],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ &movdqa (@Tx[0],@X[0]);
+ eval(shift(@insns));
+
+ &pslldq (@Tx[2],12); # "X[0]"<<96, extract one dword
+ &paddd (@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &psrld (@Tx[0],31);
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ &movdqa (@Tx[1],@Tx[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &psrld (@Tx[2],30);
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ &por (@X[0],@Tx[0]); # "X[0]"<<<=1
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pslld (@Tx[1],2);
+ &pxor (@X[0],@Tx[2]);
+ eval(shift(@insns));
+ &movdqa (@Tx[2],eval(16*(($Xi)/5))."($K_XX_XX)"); # K_XX_XX
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[0],@Tx[1]); # "X[0]"^=("X[0]">>96)<<<2
+ &pshufd (@Tx[1],@X[-1&7],0xee) if ($Xi==7); # was &movdqa (@Tx[0],@X[-1&7]) in Xupdate_ssse3_32_79
+
+ foreach (@insns) { eval; } # remaining instructions [if any]
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+ push(@Tx,shift(@Tx));
+}
+
+sub Xupdate_ssse3_32_79()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 to 44 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns)) if ($Xi==8);
+ &pxor (@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
+ eval(shift(@insns)) if ($Xi==8);
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns)) if (@insns[1] =~ /_ror/);
+ eval(shift(@insns)) if (@insns[0] =~ /_ror/);
+ &punpcklqdq(@Tx[0],@X[-1&7]); # compose "X[-6]", was &palignr(@Tx[0],@X[-2&7],8);
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &pxor (@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ if ($Xi%5) {
+ &movdqa (@Tx[2],@Tx[1]);# "perpetuate" K_XX_XX...
+ } else { # ... or load next one
+ &movdqa (@Tx[2],eval(16*($Xi/5))."($K_XX_XX)");
+ }
+ eval(shift(@insns)); # ror
+ &paddd (@Tx[1],@X[-1&7]);
+ eval(shift(@insns));
+
+ &pxor (@X[0],@Tx[0]); # "X[0]"^="X[-6]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns)) if (@insns[0] =~ /_ror/);
+
+ &movdqa (@Tx[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+ eval(shift(@insns)); # body_20_39
+
+ &pslld (@X[0],2);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &psrld (@Tx[0],30);
+ eval(shift(@insns)) if (@insns[0] =~ /_rol/);# rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+
+ &por (@X[0],@Tx[0]); # "X[0]"<<<=2
+ eval(shift(@insns));
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns)) if (@insns[1] =~ /_rol/);
+ eval(shift(@insns)) if (@insns[0] =~ /_rol/);
+ &pshufd(@Tx[1],@X[-1&7],0xee) if ($Xi<19); # was &movdqa (@Tx[1],@X[0])
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+ push(@Tx,shift(@Tx));
+}
+
+sub Xuplast_ssse3_80()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &paddd (@Tx[1],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ &cmp ($inp,$len);
+ &je (shift);
+
+ unshift(@Tx,pop(@Tx));
+
+ &movdqa (@Tx[2],"64($K_XX_XX)"); # pbswap mask
+ &movdqa (@Tx[1],"0($K_XX_XX)"); # K_00_19
+ &movdqu (@X[-4&7],"0($inp)"); # load input
+ &movdqu (@X[-3&7],"16($inp)");
+ &movdqu (@X[-2&7],"32($inp)");
+ &movdqu (@X[-1&7],"48($inp)");
+ &pshufb (@X[-4&7],@Tx[2]); # byte swap
+ &add ($inp,64);
+
+ $Xi=0;
+}
+
+sub Xloop_ssse3()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &pshufb (@X[($Xi-3)&7],@Tx[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &paddd (@X[($Xi-4)&7],@Tx[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (eval(16*$Xi)."(%rsp)",@X[($Xi-4)&7]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &psubd (@X[($Xi-4)&7],@Tx[1]);
+
+ foreach (@insns) { eval; }
+ $Xi++;
+}
+
+sub Xtail_ssse3()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ foreach (@insns) { eval; }
+}
+
+my @body_00_19 = (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&$_ror ($b,$j?7:2);', # $b>>>2
+ '&xor (@T[0],$d);',
+ '&mov (@T[1],$a);', # $b for next round
+
+ '&add ($e,eval(4*($j&15))."(%rsp)");',# X[]+K xfer
+ '&xor ($b,$c);', # $c^$d for next round
+
+ '&$_rol ($a,5);',
+ '&add ($e,@T[0]);',
+ '&and (@T[1],$b);', # ($b&($c^$d)) for next round
+
+ '&xor ($b,$c);', # restore $b
+ '&add ($e,$a);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+
+sub body_00_19 () { # ((c^d)&b)^d
+ # on start @T[0]=(c^d)&b
+ return &body_20_39() if ($rx==19); $rx++;
+
+ use integer;
+ my ($k,$n);
+ my @r=@body_00_19;
+
+ $n = scalar(@r);
+ $k = (($jj+1)*12/20)*20*$n/12; # 12 aesencs per these 20 rounds
+ @r[$k%$n].='&$aesenc();' if ($jj==$k/$n);
+ $jj++;
+
+ return @r;
+}
+
+my @body_20_39 = (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&add ($e,eval(4*($j&15))."(%rsp)");',# X[]+K xfer
+ '&xor (@T[0],$d) if($j==19);'.
+ '&xor (@T[0],$c) if($j> 19);', # ($b^$d^$c)
+ '&mov (@T[1],$a);', # $b for next round
+
+ '&$_rol ($a,5);',
+ '&add ($e,@T[0]);',
+ '&xor (@T[1],$c) if ($j< 79);', # $b^$d for next round
+
+ '&$_ror ($b,7);', # $b>>>2
+ '&add ($e,$a);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+
+sub body_20_39 () { # b^d^c
+ # on entry @T[0]=b^d
+ return &body_40_59() if ($rx==39); $rx++;
+
+ use integer;
+ my ($k,$n);
+ my @r=@body_20_39;
+
+ $n = scalar(@r);
+ $k = (($jj+1)*8/20)*20*$n/8; # 8 aesencs per these 20 rounds
+ @r[$k%$n].='&$aesenc();' if ($jj==$k/$n && $rx!=20);
+ $jj++;
+
+ return @r;
+}
+
+my @body_40_59 = (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&add ($e,eval(4*($j&15))."(%rsp)");',# X[]+K xfer
+ '&and (@T[0],$c) if ($j>=40);', # (b^c)&(c^d)
+ '&xor ($c,$d) if ($j>=40);', # restore $c
+
+ '&$_ror ($b,7);', # $b>>>2
+ '&mov (@T[1],$a);', # $b for next round
+ '&xor (@T[0],$c);',
+
+ '&$_rol ($a,5);',
+ '&add ($e,@T[0]);',
+ '&xor (@T[1],$c) if ($j==59);'.
+ '&xor (@T[1],$b) if ($j< 59);', # b^c for next round
+
+ '&xor ($b,$c) if ($j< 59);', # c^d for next round
+ '&add ($e,$a);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+
+sub body_40_59 () { # ((b^c)&(c^d))^c
+ # on entry @T[0]=(b^c), (c^=d)
+ $rx++;
+
+ use integer;
+ my ($k,$n);
+ my @r=@body_40_59;
+
+ $n = scalar(@r);
+ $k=(($jj+1)*12/20)*20*$n/12; # 12 aesencs per these 20 rounds
+ @r[$k%$n].='&$aesenc();' if ($jj==$k/$n && $rx!=40);
+ $jj++;
+
+ return @r;
+}
+$code.=<<___;
+.align 32
+.Loop_ssse3:
+___
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_32_79(\&body_00_19);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xuplast_ssse3_80(\&body_20_39,".Ldone_ssse3"); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+ $saved_r=$r; @saved_rndkey=@rndkey;
+
+ &Xloop_ssse3(\&body_20_39);
+ &Xloop_ssse3(\&body_20_39);
+ &Xloop_ssse3(\&body_20_39);
+
+$code.=<<___;
+ movups $iv,48($out,$in0) # write output
+ lea 64($in0),$in0
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ add 12($ctx),$D
+ mov $A,0($ctx)
+ add 16($ctx),$E
+ mov @T[0],4($ctx)
+ mov @T[0],$B # magic seed
+ mov $C,8($ctx)
+ mov $C,@T[1]
+ mov $D,12($ctx)
+ xor $D,@T[1]
+ mov $E,16($ctx)
+ and @T[1],@T[0]
+ jmp .Loop_ssse3
+
+.Ldone_ssse3:
+___
+ $jj=$j=$saved_j; @V=@saved_V;
+ $r=$saved_r; @rndkey=@saved_rndkey;
+
+ &Xtail_ssse3(\&body_20_39);
+ &Xtail_ssse3(\&body_20_39);
+ &Xtail_ssse3(\&body_20_39);
+
+$code.=<<___;
+ movups $iv,48($out,$in0) # write output
+ mov 88(%rsp),$ivp # restore $ivp
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ mov $A,0($ctx)
+ add 12($ctx),$D
+ mov @T[0],4($ctx)
+ add 16($ctx),$E
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+ movups $iv,($ivp) # write IV
+___
+$code.=<<___ if ($win64);
+ movaps 96+0(%rsp),%xmm6
+ movaps 96+16(%rsp),%xmm7
+ movaps 96+32(%rsp),%xmm8
+ movaps 96+48(%rsp),%xmm9
+ movaps 96+64(%rsp),%xmm10
+ movaps 96+80(%rsp),%xmm11
+ movaps 96+96(%rsp),%xmm12
+ movaps 96+112(%rsp),%xmm13
+ movaps 96+128(%rsp),%xmm14
+ movaps 96+144(%rsp),%xmm15
+___
+$code.=<<___;
+ lea `104+($win64?10*16:0)`(%rsp),%rsi
+ mov 0(%rsi),%r15
+ mov 8(%rsi),%r14
+ mov 16(%rsi),%r13
+ mov 24(%rsi),%r12
+ mov 32(%rsi),%rbp
+ mov 40(%rsi),%rbx
+ lea 48(%rsi),%rsp
+.Lepilogue_ssse3:
+ ret
+.size aesni_cbc_sha1_enc_ssse3,.-aesni_cbc_sha1_enc_ssse3
+___
+
+ if ($stitched_decrypt) {{{
+# reset
+($in0,$out,$len,$key,$ivp,$ctx,$inp)=("%rdi","%rsi","%rdx","%rcx","%r8","%r9","%r10");
+$j=$jj=$r=$rx=0;
+$Xi=4;
+
+# reassign for Atom Silvermont (see above)
+($inout0,$inout1,$inout2,$inout3,$rndkey0)=map("%xmm$_",(0..4));
+@X=map("%xmm$_",(8..13,6,7));
+@Tx=map("%xmm$_",(14,15,5));
+
+my @aes256_dec = (
+ '&movdqu($inout0,"0x00($in0)");',
+ '&movdqu($inout1,"0x10($in0)"); &pxor ($inout0,$rndkey0);',
+ '&movdqu($inout2,"0x20($in0)"); &pxor ($inout1,$rndkey0);',
+ '&movdqu($inout3,"0x30($in0)"); &pxor ($inout2,$rndkey0);',
+
+ '&pxor ($inout3,$rndkey0); &movups ($rndkey0,"16-112($key)");',
+ '&movaps("64(%rsp)",@X[2]);', # save IV, originally @X[3]
+ undef,undef
+ );
+for ($i=0;$i<13;$i++) {
+ push (@aes256_dec,(
+ '&aesdec ($inout0,$rndkey0);',
+ '&aesdec ($inout1,$rndkey0);',
+ '&aesdec ($inout2,$rndkey0);',
+ '&aesdec ($inout3,$rndkey0); &movups($rndkey0,"'.(16*($i+2)-112).'($key)");'
+ ));
+ push (@aes256_dec,(undef,undef)) if (($i>=3 && $i<=5) || $i>=11);
+ push (@aes256_dec,(undef,undef)) if ($i==5);
+}
+push(@aes256_dec,(
+ '&aesdeclast ($inout0,$rndkey0); &movups (@X[0],"0x00($in0)");',
+ '&aesdeclast ($inout1,$rndkey0); &movups (@X[1],"0x10($in0)");',
+ '&aesdeclast ($inout2,$rndkey0); &movups (@X[2],"0x20($in0)");',
+ '&aesdeclast ($inout3,$rndkey0); &movups (@X[3],"0x30($in0)");',
+
+ '&xorps ($inout0,"64(%rsp)"); &movdqu ($rndkey0,"-112($key)");',
+ '&xorps ($inout1,@X[0]); &movups ("0x00($out,$in0)",$inout0);',
+ '&xorps ($inout2,@X[1]); &movups ("0x10($out,$in0)",$inout1);',
+ '&xorps ($inout3,@X[2]); &movups ("0x20($out,$in0)",$inout2);',
+
+ '&movups ("0x30($out,$in0)",$inout3);'
+ ));
+
+sub body_00_19_dec () { # ((c^d)&b)^d
+ # on start @T[0]=(c^d)&b
+ return &body_20_39_dec() if ($rx==19);
+
+ my @r=@body_00_19;
+
+ unshift (@r,@aes256_dec[$rx]) if (@aes256_dec[$rx]);
+ $rx++;
+
+ return @r;
+}
+
+sub body_20_39_dec () { # b^d^c
+ # on entry @T[0]=b^d
+ return &body_40_59_dec() if ($rx==39);
+
+ my @r=@body_20_39;
+
+ unshift (@r,@aes256_dec[$rx]) if (@aes256_dec[$rx]);
+ $rx++;
+
+ return @r;
+}
+
+sub body_40_59_dec () { # ((b^c)&(c^d))^c
+ # on entry @T[0]=(b^c), (c^=d)
+
+ my @r=@body_40_59;
+
+ unshift (@r,@aes256_dec[$rx]) if (@aes256_dec[$rx]);
+ $rx++;
+
+ return @r;
+}
+
+$code.=<<___;
+.globl aesni256_cbc_sha1_dec
+.type aesni256_cbc_sha1_dec,\@abi-omnipotent
+.align 32
+aesni256_cbc_sha1_dec:
+ # caller should check for SSSE3 and AES-NI bits
+ mov OPENSSL_ia32cap_P+0(%rip),%r10d
+ mov OPENSSL_ia32cap_P+4(%rip),%r11d
+___
+$code.=<<___ if ($avx);
+ and \$`1<<28`,%r11d # mask AVX bit
+ and \$`1<<30`,%r10d # mask "Intel CPU" bit
+ or %r11d,%r10d
+ cmp \$`1<<28|1<<30`,%r10d
+ je aesni256_cbc_sha1_dec_avx
+___
+$code.=<<___;
+ jmp aesni256_cbc_sha1_dec_ssse3
+ ret
+.size aesni256_cbc_sha1_dec,.-aesni256_cbc_sha1_dec
+
+.type aesni256_cbc_sha1_dec_ssse3,\@function,6
+.align 32
+aesni256_cbc_sha1_dec_ssse3:
+ mov `($win64?56:8)`(%rsp),$inp # load 7th argument
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ lea `-104-($win64?10*16:0)`(%rsp),%rsp
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,96+0(%rsp)
+ movaps %xmm7,96+16(%rsp)
+ movaps %xmm8,96+32(%rsp)
+ movaps %xmm9,96+48(%rsp)
+ movaps %xmm10,96+64(%rsp)
+ movaps %xmm11,96+80(%rsp)
+ movaps %xmm12,96+96(%rsp)
+ movaps %xmm13,96+112(%rsp)
+ movaps %xmm14,96+128(%rsp)
+ movaps %xmm15,96+144(%rsp)
+.Lprologue_dec_ssse3:
+___
+$code.=<<___;
+ mov $in0,%r12 # reassign arguments
+ mov $out,%r13
+ mov $len,%r14
+ lea 112($key),%r15 # size optimization
+ movdqu ($ivp),@X[3] # load IV
+ #mov $ivp,88(%rsp) # save $ivp
+___
+($in0,$out,$len,$key)=map("%r$_",(12..15)); # reassign arguments
+$code.=<<___;
+ shl \$6,$len
+ sub $in0,$out
+ add $inp,$len # end of input
+
+ lea K_XX_XX(%rip),$K_XX_XX
+ mov 0($ctx),$A # load context
+ mov 4($ctx),$B
+ mov 8($ctx),$C
+ mov 12($ctx),$D
+ mov $B,@T[0] # magic seed
+ mov 16($ctx),$E
+ mov $C,@T[1]
+ xor $D,@T[1]
+ and @T[1],@T[0]
+
+ movdqa 64($K_XX_XX),@Tx[2] # pbswap mask
+ movdqa 0($K_XX_XX),@Tx[1] # K_00_19
+ movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
+ movdqu 16($inp),@X[-3&7]
+ movdqu 32($inp),@X[-2&7]
+ movdqu 48($inp),@X[-1&7]
+ pshufb @Tx[2],@X[-4&7] # byte swap
+ add \$64,$inp
+ pshufb @Tx[2],@X[-3&7]
+ pshufb @Tx[2],@X[-2&7]
+ pshufb @Tx[2],@X[-1&7]
+ paddd @Tx[1],@X[-4&7] # add K_00_19
+ paddd @Tx[1],@X[-3&7]
+ paddd @Tx[1],@X[-2&7]
+ movdqa @X[-4&7],0(%rsp) # X[]+K xfer to IALU
+ psubd @Tx[1],@X[-4&7] # restore X[]
+ movdqa @X[-3&7],16(%rsp)
+ psubd @Tx[1],@X[-3&7]
+ movdqa @X[-2&7],32(%rsp)
+ psubd @Tx[1],@X[-2&7]
+ movdqu -112($key),$rndkey0 # $key[0]
+ jmp .Loop_dec_ssse3
+
+.align 32
+.Loop_dec_ssse3:
+___
+ &Xupdate_ssse3_16_31(\&body_00_19_dec);
+ &Xupdate_ssse3_16_31(\&body_00_19_dec);
+ &Xupdate_ssse3_16_31(\&body_00_19_dec);
+ &Xupdate_ssse3_16_31(\&body_00_19_dec);
+ &Xupdate_ssse3_32_79(\&body_00_19_dec);
+ &Xupdate_ssse3_32_79(\&body_20_39_dec);
+ &Xupdate_ssse3_32_79(\&body_20_39_dec);
+ &Xupdate_ssse3_32_79(\&body_20_39_dec);
+ &Xupdate_ssse3_32_79(\&body_20_39_dec);
+ &Xupdate_ssse3_32_79(\&body_20_39_dec);
+ &Xupdate_ssse3_32_79(\&body_40_59_dec);
+ &Xupdate_ssse3_32_79(\&body_40_59_dec);
+ &Xupdate_ssse3_32_79(\&body_40_59_dec);
+ &Xupdate_ssse3_32_79(\&body_40_59_dec);
+ &Xupdate_ssse3_32_79(\&body_40_59_dec);
+ &Xupdate_ssse3_32_79(\&body_20_39_dec);
+ &Xuplast_ssse3_80(\&body_20_39_dec,".Ldone_dec_ssse3"); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+ $saved_rx=$rx;
+
+ &Xloop_ssse3(\&body_20_39_dec);
+ &Xloop_ssse3(\&body_20_39_dec);
+ &Xloop_ssse3(\&body_20_39_dec);
+
+ eval(@aes256_dec[-1]); # last store
+$code.=<<___;
+ lea 64($in0),$in0
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ add 12($ctx),$D
+ mov $A,0($ctx)
+ add 16($ctx),$E
+ mov @T[0],4($ctx)
+ mov @T[0],$B # magic seed
+ mov $C,8($ctx)
+ mov $C,@T[1]
+ mov $D,12($ctx)
+ xor $D,@T[1]
+ mov $E,16($ctx)
+ and @T[1],@T[0]
+ jmp .Loop_dec_ssse3
+
+.Ldone_dec_ssse3:
+___
+ $jj=$j=$saved_j; @V=@saved_V;
+ $rx=$saved_rx;
+
+ &Xtail_ssse3(\&body_20_39_dec);
+ &Xtail_ssse3(\&body_20_39_dec);
+ &Xtail_ssse3(\&body_20_39_dec);
+
+ eval(@aes256_dec[-1]); # last store
+$code.=<<___;
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ mov $A,0($ctx)
+ add 12($ctx),$D
+ mov @T[0],4($ctx)
+ add 16($ctx),$E
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+ movups @X[3],($ivp) # write IV
+___
+$code.=<<___ if ($win64);
+ movaps 96+0(%rsp),%xmm6
+ movaps 96+16(%rsp),%xmm7
+ movaps 96+32(%rsp),%xmm8
+ movaps 96+48(%rsp),%xmm9
+ movaps 96+64(%rsp),%xmm10
+ movaps 96+80(%rsp),%xmm11
+ movaps 96+96(%rsp),%xmm12
+ movaps 96+112(%rsp),%xmm13
+ movaps 96+128(%rsp),%xmm14
+ movaps 96+144(%rsp),%xmm15
+___
+$code.=<<___;
+ lea `104+($win64?10*16:0)`(%rsp),%rsi
+ mov 0(%rsi),%r15
+ mov 8(%rsi),%r14
+ mov 16(%rsi),%r13
+ mov 24(%rsi),%r12
+ mov 32(%rsi),%rbp
+ mov 40(%rsi),%rbx
+ lea 48(%rsi),%rsp
+.Lepilogue_dec_ssse3:
+ ret
+.size aesni256_cbc_sha1_dec_ssse3,.-aesni256_cbc_sha1_dec_ssse3
+___
+ }}}
+$j=$jj=$r=$rx=0;
+
+if ($avx) {
+my ($in0,$out,$len,$key,$ivp,$ctx,$inp)=("%rdi","%rsi","%rdx","%rcx","%r8","%r9","%r10");
+
+my $Xi=4;
+my @X=map("%xmm$_",(4..7,0..3));
+my @Tx=map("%xmm$_",(8..10));
+my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization
+my @T=("%esi","%edi");
+my ($rndkey0,$iv,$in)=map("%xmm$_",(11..13));
+my @rndkey=("%xmm14","%xmm15");
+my ($inout0,$inout1,$inout2,$inout3)=map("%xmm$_",(12..15)); # for dec
+my $Kx=@Tx[2];
+
+my $_rol=sub { &shld(@_[0],@_) };
+my $_ror=sub { &shrd(@_[0],@_) };
+
+$code.=<<___;
+.type aesni_cbc_sha1_enc_avx,\@function,6
+.align 32
+aesni_cbc_sha1_enc_avx:
+ mov `($win64?56:8)`(%rsp),$inp # load 7th argument
+ #shr \$6,$len # debugging artefact
+ #jz .Lepilogue_avx # debugging artefact
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ lea `-104-($win64?10*16:0)`(%rsp),%rsp
+ #mov $in0,$inp # debugging artefact
+ #lea 64(%rsp),$ctx # debugging artefact
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,96+0(%rsp)
+ movaps %xmm7,96+16(%rsp)
+ movaps %xmm8,96+32(%rsp)
+ movaps %xmm9,96+48(%rsp)
+ movaps %xmm10,96+64(%rsp)
+ movaps %xmm11,96+80(%rsp)
+ movaps %xmm12,96+96(%rsp)
+ movaps %xmm13,96+112(%rsp)
+ movaps %xmm14,96+128(%rsp)
+ movaps %xmm15,96+144(%rsp)
+.Lprologue_avx:
+___
+$code.=<<___;
+ vzeroall
+ mov $in0,%r12 # reassign arguments
+ mov $out,%r13
+ mov $len,%r14
+ lea 112($key),%r15 # size optimization
+ vmovdqu ($ivp),$iv # load IV
+ mov $ivp,88(%rsp) # save $ivp
+___
+($in0,$out,$len,$key)=map("%r$_",(12..15)); # reassign arguments
+my $rounds="${ivp}d";
+$code.=<<___;
+ shl \$6,$len
+ sub $in0,$out
+ mov 240-112($key),$rounds
+ add $inp,$len # end of input
+
+ lea K_XX_XX(%rip),$K_XX_XX
+ mov 0($ctx),$A # load context
+ mov 4($ctx),$B
+ mov 8($ctx),$C
+ mov 12($ctx),$D
+ mov $B,@T[0] # magic seed
+ mov 16($ctx),$E
+ mov $C,@T[1]
+ xor $D,@T[1]
+ and @T[1],@T[0]
+
+ vmovdqa 64($K_XX_XX),@X[2] # pbswap mask
+ vmovdqa 0($K_XX_XX),$Kx # K_00_19
+ vmovdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
+ vmovdqu 16($inp),@X[-3&7]
+ vmovdqu 32($inp),@X[-2&7]
+ vmovdqu 48($inp),@X[-1&7]
+ vpshufb @X[2],@X[-4&7],@X[-4&7] # byte swap
+ add \$64,$inp
+ vpshufb @X[2],@X[-3&7],@X[-3&7]
+ vpshufb @X[2],@X[-2&7],@X[-2&7]
+ vpshufb @X[2],@X[-1&7],@X[-1&7]
+ vpaddd $Kx,@X[-4&7],@X[0] # add K_00_19
+ vpaddd $Kx,@X[-3&7],@X[1]
+ vpaddd $Kx,@X[-2&7],@X[2]
+ vmovdqa @X[0],0(%rsp) # X[]+K xfer to IALU
+ vmovdqa @X[1],16(%rsp)
+ vmovdqa @X[2],32(%rsp)
+ vmovups -112($key),$rndkey[1] # $key[0]
+ vmovups 16-112($key),$rndkey[0] # forward reference
+ jmp .Loop_avx
+___
+
+my $aesenc=sub {
+ use integer;
+ my ($n,$k)=($r/10,$r%10);
+ if ($k==0) {
+ $code.=<<___;
+ vmovdqu `16*$n`($in0),$in # load input
+ vpxor $rndkey[1],$in,$in
+___
+ $code.=<<___ if ($n);
+ vmovups $iv,`16*($n-1)`($out,$in0) # write output
+___
+ $code.=<<___;
+ vpxor $in,$iv,$iv
+ vaesenc $rndkey[0],$iv,$iv
+ vmovups `32+16*$k-112`($key),$rndkey[1]
+___
+ } elsif ($k==9) {
+ $sn++;
+ $code.=<<___;
+ cmp \$11,$rounds
+ jb .Lvaesenclast$sn
+ vaesenc $rndkey[0],$iv,$iv
+ vmovups `32+16*($k+0)-112`($key),$rndkey[1]
+ vaesenc $rndkey[1],$iv,$iv
+ vmovups `32+16*($k+1)-112`($key),$rndkey[0]
+ je .Lvaesenclast$sn
+ vaesenc $rndkey[0],$iv,$iv
+ vmovups `32+16*($k+2)-112`($key),$rndkey[1]
+ vaesenc $rndkey[1],$iv,$iv
+ vmovups `32+16*($k+3)-112`($key),$rndkey[0]
+.Lvaesenclast$sn:
+ vaesenclast $rndkey[0],$iv,$iv
+ vmovups -112($key),$rndkey[0]
+ vmovups 16-112($key),$rndkey[1] # forward reference
+___
+ } else {
+ $code.=<<___;
+ vaesenc $rndkey[0],$iv,$iv
+ vmovups `32+16*$k-112`($key),$rndkey[1]
+___
+ }
+ $r++; unshift(@rndkey,pop(@rndkey));
+};
+
+sub Xupdate_avx_16_31() # recall that $Xi starts with 4
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpalignr(@X[0],@X[-3&7],@X[-4&7],8); # compose "X[-14]" in "X[0]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpaddd (@Tx[1],$Kx,@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpsrldq(@Tx[0],@X[-1&7],4); # "X[-3]", 3 dwords
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@Tx[0],@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpsrld (@Tx[0],@X[0],31);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpslldq(@Tx[1],@X[0],12); # "X[0]"<<96, extract one dword
+ &vpaddd (@X[0],@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=1
+ &vpsrld (@Tx[0],@Tx[1],30);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpslld (@Tx[1],@Tx[1],2);
+ &vpxor (@X[0],@X[0],@Tx[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@Tx[1]); # "X[0]"^=("X[0]">>96)<<<2
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa ($Kx,eval(16*(($Xi)/5))."($K_XX_XX)") if ($Xi%5==0); # K_XX_XX
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+
+ foreach (@insns) { eval; } # remaining instructions [if any]
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xupdate_avx_32_79()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions
+ my ($a,$b,$c,$d,$e);
+
+ &vpalignr(@Tx[0],@X[-1&7],@X[-2&7],8); # compose "X[-6]"
+ &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &vpxor (@X[0],@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
+ eval(shift(@insns));
+ eval(shift(@insns)) if (@insns[0] !~ /&ro[rl]/);
+ &vpaddd (@Tx[1],$Kx,@X[-1&7]);
+ &vmovdqa ($Kx,eval(16*($Xi/5))."($K_XX_XX)") if ($Xi%5==0);
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-6]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &vpsrld (@Tx[0],@X[0],30);
+ &vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpslld (@X[0],@X[0],2);
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=2
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xuplast_avx_80()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ &vpaddd (@Tx[1],$Kx,@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ &cmp ($inp,$len);
+ &je (shift);
+
+ &vmovdqa(@Tx[1],"64($K_XX_XX)"); # pbswap mask
+ &vmovdqa($Kx,"0($K_XX_XX)"); # K_00_19
+ &vmovdqu(@X[-4&7],"0($inp)"); # load input
+ &vmovdqu(@X[-3&7],"16($inp)");
+ &vmovdqu(@X[-2&7],"32($inp)");
+ &vmovdqu(@X[-1&7],"48($inp)");
+ &vpshufb(@X[-4&7],@X[-4&7],@Tx[1]); # byte swap
+ &add ($inp,64);
+
+ $Xi=0;
+}
+
+sub Xloop_avx()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpshufb(@X[($Xi-3)&7],@X[($Xi-3)&7],@Tx[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpaddd (@Tx[0],@X[($Xi-4)&7],$Kx);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa(eval(16*$Xi)."(%rsp)",@Tx[0]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; }
+ $Xi++;
+}
+
+sub Xtail_avx()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ foreach (@insns) { eval; }
+}
+
+$code.=<<___;
+.align 32
+.Loop_avx:
+___
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_32_79(\&body_00_19);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xuplast_avx_80(\&body_20_39,".Ldone_avx"); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+ $saved_r=$r; @saved_rndkey=@rndkey;
+
+ &Xloop_avx(\&body_20_39);
+ &Xloop_avx(\&body_20_39);
+ &Xloop_avx(\&body_20_39);
+
+$code.=<<___;
+ vmovups $iv,48($out,$in0) # write output
+ lea 64($in0),$in0
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ add 12($ctx),$D
+ mov $A,0($ctx)
+ add 16($ctx),$E
+ mov @T[0],4($ctx)
+ mov @T[0],$B # magic seed
+ mov $C,8($ctx)
+ mov $C,@T[1]
+ mov $D,12($ctx)
+ xor $D,@T[1]
+ mov $E,16($ctx)
+ and @T[1],@T[0]
+ jmp .Loop_avx
+
+.Ldone_avx:
+___
+ $jj=$j=$saved_j; @V=@saved_V;
+ $r=$saved_r; @rndkey=@saved_rndkey;
+
+ &Xtail_avx(\&body_20_39);
+ &Xtail_avx(\&body_20_39);
+ &Xtail_avx(\&body_20_39);
+
+$code.=<<___;
+ vmovups $iv,48($out,$in0) # write output
+ mov 88(%rsp),$ivp # restore $ivp
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ mov $A,0($ctx)
+ add 12($ctx),$D
+ mov @T[0],4($ctx)
+ add 16($ctx),$E
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+ vmovups $iv,($ivp) # write IV
+ vzeroall
+___
+$code.=<<___ if ($win64);
+ movaps 96+0(%rsp),%xmm6
+ movaps 96+16(%rsp),%xmm7
+ movaps 96+32(%rsp),%xmm8
+ movaps 96+48(%rsp),%xmm9
+ movaps 96+64(%rsp),%xmm10
+ movaps 96+80(%rsp),%xmm11
+ movaps 96+96(%rsp),%xmm12
+ movaps 96+112(%rsp),%xmm13
+ movaps 96+128(%rsp),%xmm14
+ movaps 96+144(%rsp),%xmm15
+___
+$code.=<<___;
+ lea `104+($win64?10*16:0)`(%rsp),%rsi
+ mov 0(%rsi),%r15
+ mov 8(%rsi),%r14
+ mov 16(%rsi),%r13
+ mov 24(%rsi),%r12
+ mov 32(%rsi),%rbp
+ mov 40(%rsi),%rbx
+ lea 48(%rsi),%rsp
+.Lepilogue_avx:
+ ret
+.size aesni_cbc_sha1_enc_avx,.-aesni_cbc_sha1_enc_avx
+___
+
+ if ($stitched_decrypt) {{{
+# reset
+($in0,$out,$len,$key,$ivp,$ctx,$inp)=("%rdi","%rsi","%rdx","%rcx","%r8","%r9","%r10");
+
+$j=$jj=$r=$rx=0;
+$Xi=4;
+
+@aes256_dec = (
+ '&vpxor ($inout0,$rndkey0,"0x00($in0)");',
+ '&vpxor ($inout1,$rndkey0,"0x10($in0)");',
+ '&vpxor ($inout2,$rndkey0,"0x20($in0)");',
+ '&vpxor ($inout3,$rndkey0,"0x30($in0)");',
+
+ '&vmovups($rndkey0,"16-112($key)");',
+ '&vmovups("64(%rsp)",@X[2]);', # save IV, originally @X[3]
+ undef,undef
+ );
+for ($i=0;$i<13;$i++) {
+ push (@aes256_dec,(
+ '&vaesdec ($inout0,$inout0,$rndkey0);',
+ '&vaesdec ($inout1,$inout1,$rndkey0);',
+ '&vaesdec ($inout2,$inout2,$rndkey0);',
+ '&vaesdec ($inout3,$inout3,$rndkey0); &vmovups($rndkey0,"'.(16*($i+2)-112).'($key)");'
+ ));
+ push (@aes256_dec,(undef,undef)) if (($i>=3 && $i<=5) || $i>=11);
+ push (@aes256_dec,(undef,undef)) if ($i==5);
+}
+push(@aes256_dec,(
+ '&vaesdeclast ($inout0,$inout0,$rndkey0); &vmovups(@X[0],"0x00($in0)");',
+ '&vaesdeclast ($inout1,$inout1,$rndkey0); &vmovups(@X[1],"0x10($in0)");',
+ '&vaesdeclast ($inout2,$inout2,$rndkey0); &vmovups(@X[2],"0x20($in0)");',
+ '&vaesdeclast ($inout3,$inout3,$rndkey0); &vmovups(@X[3],"0x30($in0)");',
+
+ '&vxorps ($inout0,$inout0,"64(%rsp)"); &vmovdqu($rndkey0,"-112($key)");',
+ '&vxorps ($inout1,$inout1,@X[0]); &vmovups("0x00($out,$in0)",$inout0);',
+ '&vxorps ($inout2,$inout2,@X[1]); &vmovups("0x10($out,$in0)",$inout1);',
+ '&vxorps ($inout3,$inout3,@X[2]); &vmovups("0x20($out,$in0)",$inout2);',
+
+ '&vmovups ("0x30($out,$in0)",$inout3);'
+ ));
+
+$code.=<<___;
+.type aesni256_cbc_sha1_dec_avx,\@function,6
+.align 32
+aesni256_cbc_sha1_dec_avx:
+ mov `($win64?56:8)`(%rsp),$inp # load 7th argument
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ lea `-104-($win64?10*16:0)`(%rsp),%rsp
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,96+0(%rsp)
+ movaps %xmm7,96+16(%rsp)
+ movaps %xmm8,96+32(%rsp)
+ movaps %xmm9,96+48(%rsp)
+ movaps %xmm10,96+64(%rsp)
+ movaps %xmm11,96+80(%rsp)
+ movaps %xmm12,96+96(%rsp)
+ movaps %xmm13,96+112(%rsp)
+ movaps %xmm14,96+128(%rsp)
+ movaps %xmm15,96+144(%rsp)
+.Lprologue_dec_avx:
+___
+$code.=<<___;
+ vzeroall
+ mov $in0,%r12 # reassign arguments
+ mov $out,%r13
+ mov $len,%r14
+ lea 112($key),%r15 # size optimization
+ vmovdqu ($ivp),@X[3] # load IV
+___
+($in0,$out,$len,$key)=map("%r$_",(12..15)); # reassign arguments
+$code.=<<___;
+ shl \$6,$len
+ sub $in0,$out
+ add $inp,$len # end of input
+
+ lea K_XX_XX(%rip),$K_XX_XX
+ mov 0($ctx),$A # load context
+ mov 4($ctx),$B
+ mov 8($ctx),$C
+ mov 12($ctx),$D
+ mov $B,@T[0] # magic seed
+ mov 16($ctx),$E
+ mov $C,@T[1]
+ xor $D,@T[1]
+ and @T[1],@T[0]
+
+ vmovdqa 64($K_XX_XX),@X[2] # pbswap mask
+ vmovdqa 0($K_XX_XX),$Kx # K_00_19
+ vmovdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
+ vmovdqu 16($inp),@X[-3&7]
+ vmovdqu 32($inp),@X[-2&7]
+ vmovdqu 48($inp),@X[-1&7]
+ vpshufb @X[2],@X[-4&7],@X[-4&7] # byte swap
+ add \$64,$inp
+ vpshufb @X[2],@X[-3&7],@X[-3&7]
+ vpshufb @X[2],@X[-2&7],@X[-2&7]
+ vpshufb @X[2],@X[-1&7],@X[-1&7]
+ vpaddd $Kx,@X[-4&7],@X[0] # add K_00_19
+ vpaddd $Kx,@X[-3&7],@X[1]
+ vpaddd $Kx,@X[-2&7],@X[2]
+ vmovdqa @X[0],0(%rsp) # X[]+K xfer to IALU
+ vmovdqa @X[1],16(%rsp)
+ vmovdqa @X[2],32(%rsp)
+ vmovups -112($key),$rndkey0 # $key[0]
+ jmp .Loop_dec_avx
+
+.align 32
+.Loop_dec_avx:
+___
+ &Xupdate_avx_16_31(\&body_00_19_dec);
+ &Xupdate_avx_16_31(\&body_00_19_dec);
+ &Xupdate_avx_16_31(\&body_00_19_dec);
+ &Xupdate_avx_16_31(\&body_00_19_dec);
+ &Xupdate_avx_32_79(\&body_00_19_dec);
+ &Xupdate_avx_32_79(\&body_20_39_dec);
+ &Xupdate_avx_32_79(\&body_20_39_dec);
+ &Xupdate_avx_32_79(\&body_20_39_dec);
+ &Xupdate_avx_32_79(\&body_20_39_dec);
+ &Xupdate_avx_32_79(\&body_20_39_dec);
+ &Xupdate_avx_32_79(\&body_40_59_dec);
+ &Xupdate_avx_32_79(\&body_40_59_dec);
+ &Xupdate_avx_32_79(\&body_40_59_dec);
+ &Xupdate_avx_32_79(\&body_40_59_dec);
+ &Xupdate_avx_32_79(\&body_40_59_dec);
+ &Xupdate_avx_32_79(\&body_20_39_dec);
+ &Xuplast_avx_80(\&body_20_39_dec,".Ldone_dec_avx"); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+ $saved_rx=$rx;
+
+ &Xloop_avx(\&body_20_39_dec);
+ &Xloop_avx(\&body_20_39_dec);
+ &Xloop_avx(\&body_20_39_dec);
+
+ eval(@aes256_dec[-1]); # last store
+$code.=<<___;
+ lea 64($in0),$in0
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ add 12($ctx),$D
+ mov $A,0($ctx)
+ add 16($ctx),$E
+ mov @T[0],4($ctx)
+ mov @T[0],$B # magic seed
+ mov $C,8($ctx)
+ mov $C,@T[1]
+ mov $D,12($ctx)
+ xor $D,@T[1]
+ mov $E,16($ctx)
+ and @T[1],@T[0]
+ jmp .Loop_dec_avx
+
+.Ldone_dec_avx:
+___
+ $jj=$j=$saved_j; @V=@saved_V;
+ $rx=$saved_rx;
+
+ &Xtail_avx(\&body_20_39_dec);
+ &Xtail_avx(\&body_20_39_dec);
+ &Xtail_avx(\&body_20_39_dec);
+
+ eval(@aes256_dec[-1]); # last store
+$code.=<<___;
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ mov $A,0($ctx)
+ add 12($ctx),$D
+ mov @T[0],4($ctx)
+ add 16($ctx),$E
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+ vmovups @X[3],($ivp) # write IV
+ vzeroall
+___
+$code.=<<___ if ($win64);
+ movaps 96+0(%rsp),%xmm6
+ movaps 96+16(%rsp),%xmm7
+ movaps 96+32(%rsp),%xmm8
+ movaps 96+48(%rsp),%xmm9
+ movaps 96+64(%rsp),%xmm10
+ movaps 96+80(%rsp),%xmm11
+ movaps 96+96(%rsp),%xmm12
+ movaps 96+112(%rsp),%xmm13
+ movaps 96+128(%rsp),%xmm14
+ movaps 96+144(%rsp),%xmm15
+___
+$code.=<<___;
+ lea `104+($win64?10*16:0)`(%rsp),%rsi
+ mov 0(%rsi),%r15
+ mov 8(%rsi),%r14
+ mov 16(%rsi),%r13
+ mov 24(%rsi),%r12
+ mov 32(%rsi),%rbp
+ mov 40(%rsi),%rbx
+ lea 48(%rsi),%rsp
+.Lepilogue_dec_avx:
+ ret
+.size aesni256_cbc_sha1_dec_avx,.-aesni256_cbc_sha1_dec_avx
+___
+ }}}
+}
+$code.=<<___;
+.align 64
+K_XX_XX:
+.long 0x5a827999,0x5a827999,0x5a827999,0x5a827999 # K_00_19
+.long 0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1 # K_20_39
+.long 0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc # K_40_59
+.long 0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6 # K_60_79
+.long 0x00010203,0x04050607,0x08090a0b,0x0c0d0e0f # pbswap mask
+.byte 0xf,0xe,0xd,0xc,0xb,0xa,0x9,0x8,0x7,0x6,0x5,0x4,0x3,0x2,0x1,0x0
+
+.asciz "AESNI-CBC+SHA1 stitch for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
+.align 64
+___
+ if ($shaext) {{{
+($in0,$out,$len,$key,$ivp,$ctx,$inp)=("%rdi","%rsi","%rdx","%rcx","%r8","%r9","%r10");
+
+$rounds="%r11d";
+
+($iv,$in,$rndkey0)=map("%xmm$_",(2,14,15));
+@rndkey=("%xmm0","%xmm1");
+$r=0;
+
+my ($BSWAP,$ABCD,$E,$E_,$ABCD_SAVE,$E_SAVE)=map("%xmm$_",(7..12));
+my @MSG=map("%xmm$_",(3..6));
+
+$code.=<<___;
+.type aesni_cbc_sha1_enc_shaext,\@function,6
+.align 32
+aesni_cbc_sha1_enc_shaext:
+ mov `($win64?56:8)`(%rsp),$inp # load 7th argument
+___
+$code.=<<___ if ($win64);
+ lea `-8-10*16`(%rsp),%rsp
+ movaps %xmm6,-8-10*16(%rax)
+ movaps %xmm7,-8-9*16(%rax)
+ movaps %xmm8,-8-8*16(%rax)
+ movaps %xmm9,-8-7*16(%rax)
+ movaps %xmm10,-8-6*16(%rax)
+ movaps %xmm11,-8-5*16(%rax)
+ movaps %xmm12,-8-4*16(%rax)
+ movaps %xmm13,-8-3*16(%rax)
+ movaps %xmm14,-8-2*16(%rax)
+ movaps %xmm15,-8-1*16(%rax)
+.Lprologue_shaext:
+___
+$code.=<<___;
+ movdqu ($ctx),$ABCD
+ movd 16($ctx),$E
+ movdqa K_XX_XX+0x50(%rip),$BSWAP # byte-n-word swap
+
+ mov 240($key),$rounds
+ sub $in0,$out
+ movups ($key),$rndkey0 # $key[0]
+ movups ($ivp),$iv # load IV
+ movups 16($key),$rndkey[0] # forward reference
+ lea 112($key),$key # size optimization
+
+ pshufd \$0b00011011,$ABCD,$ABCD # flip word order
+ pshufd \$0b00011011,$E,$E # flip word order
+ jmp .Loop_shaext
+
+.align 16
+.Loop_shaext:
+___
+ &$aesenc();
+$code.=<<___;
+ movdqu ($inp),@MSG[0]
+ movdqa $E,$E_SAVE # offload $E
+ pshufb $BSWAP,@MSG[0]
+ movdqu 0x10($inp),@MSG[1]
+ movdqa $ABCD,$ABCD_SAVE # offload $ABCD
+___
+ &$aesenc();
+$code.=<<___;
+ pshufb $BSWAP,@MSG[1]
+
+ paddd @MSG[0],$E
+ movdqu 0x20($inp),@MSG[2]
+ lea 0x40($inp),$inp
+ pxor $E_SAVE,@MSG[0] # black magic
+___
+ &$aesenc();
+$code.=<<___;
+ pxor $E_SAVE,@MSG[0] # black magic
+ movdqa $ABCD,$E_
+ pshufb $BSWAP,@MSG[2]
+ sha1rnds4 \$0,$E,$ABCD # 0-3
+ sha1nexte @MSG[1],$E_
+___
+ &$aesenc();
+$code.=<<___;
+ sha1msg1 @MSG[1],@MSG[0]
+ movdqu -0x10($inp),@MSG[3]
+ movdqa $ABCD,$E
+ pshufb $BSWAP,@MSG[3]
+___
+ &$aesenc();
+$code.=<<___;
+ sha1rnds4 \$0,$E_,$ABCD # 4-7
+ sha1nexte @MSG[2],$E
+ pxor @MSG[2],@MSG[0]
+ sha1msg1 @MSG[2],@MSG[1]
+___
+ &$aesenc();
+
+for($i=2;$i<20-4;$i++) {
+$code.=<<___;
+ movdqa $ABCD,$E_
+ sha1rnds4 \$`int($i/5)`,$E,$ABCD # 8-11
+ sha1nexte @MSG[3],$E_
+___
+ &$aesenc();
+$code.=<<___;
+ sha1msg2 @MSG[3],@MSG[0]
+ pxor @MSG[3],@MSG[1]
+ sha1msg1 @MSG[3],@MSG[2]
+___
+ ($E,$E_)=($E_,$E);
+ push(@MSG,shift(@MSG));
+
+ &$aesenc();
+}
+$code.=<<___;
+ movdqa $ABCD,$E_
+ sha1rnds4 \$3,$E,$ABCD # 64-67
+ sha1nexte @MSG[3],$E_
+ sha1msg2 @MSG[3],@MSG[0]
+ pxor @MSG[3],@MSG[1]
+___
+ &$aesenc();
+$code.=<<___;
+ movdqa $ABCD,$E
+ sha1rnds4 \$3,$E_,$ABCD # 68-71
+ sha1nexte @MSG[0],$E
+ sha1msg2 @MSG[0],@MSG[1]
+___
+ &$aesenc();
+$code.=<<___;
+ movdqa $E_SAVE,@MSG[0]
+ movdqa $ABCD,$E_
+ sha1rnds4 \$3,$E,$ABCD # 72-75
+ sha1nexte @MSG[1],$E_
+___
+ &$aesenc();
+$code.=<<___;
+ movdqa $ABCD,$E
+ sha1rnds4 \$3,$E_,$ABCD # 76-79
+ sha1nexte $MSG[0],$E
+___
+ while($r<40) { &$aesenc(); } # remaining aesenc's
+$code.=<<___;
+ dec $len
+
+ paddd $ABCD_SAVE,$ABCD
+ movups $iv,48($out,$in0) # write output
+ lea 64($in0),$in0
+ jnz .Loop_shaext
+
+ pshufd \$0b00011011,$ABCD,$ABCD
+ pshufd \$0b00011011,$E,$E
+ movups $iv,($ivp) # write IV
+ movdqu $ABCD,($ctx)
+ movd $E,16($ctx)
+___
+$code.=<<___ if ($win64);
+ movaps -8-10*16(%rax),%xmm6
+ movaps -8-9*16(%rax),%xmm7
+ movaps -8-8*16(%rax),%xmm8
+ movaps -8-7*16(%rax),%xmm9
+ movaps -8-6*16(%rax),%xmm10
+ movaps -8-5*16(%rax),%xmm11
+ movaps -8-4*16(%rax),%xmm12
+ movaps -8-3*16(%rax),%xmm13
+ movaps -8-2*16(%rax),%xmm14
+ movaps -8-1*16(%rax),%xmm15
+ mov %rax,%rsp
+.Lepilogue_shaext:
+___
+$code.=<<___;
+ ret
+.size aesni_cbc_sha1_enc_shaext,.-aesni_cbc_sha1_enc_shaext
+___
+ }}}
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+# CONTEXT *context,DISPATCHER_CONTEXT *disp)
+if ($win64) {
+$rec="%rcx";
+$frame="%rdx";
+$context="%r8";
+$disp="%r9";
+
+$code.=<<___;
+.extern __imp_RtlVirtualUnwind
+.type ssse3_handler,\@abi-omnipotent
+.align 16
+ssse3_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 120($context),%rax # pull context->Rax
+ mov 248($context),%rbx # pull context->Rip
+
+ mov 8($disp),%rsi # disp->ImageBase
+ mov 56($disp),%r11 # disp->HandlerData
+
+ mov 0(%r11),%r10d # HandlerData[0]
+ lea (%rsi,%r10),%r10 # prologue label
+ cmp %r10,%rbx # context->Rip<prologue label
+ jb .Lcommon_seh_tail
+
+ mov 152($context),%rax # pull context->Rsp
+
+ mov 4(%r11),%r10d # HandlerData[1]
+ lea (%rsi,%r10),%r10 # epilogue label
+ cmp %r10,%rbx # context->Rip>=epilogue label
+ jae .Lcommon_seh_tail
+___
+$code.=<<___ if ($shaext);
+ lea aesni_cbc_sha1_enc_shaext(%rip),%r10
+ cmp %r10,%rbx
+ jb .Lseh_no_shaext
+
+ lea (%rax),%rsi
+ lea 512($context),%rdi # &context.Xmm6
+ mov \$20,%ecx
+ .long 0xa548f3fc # cld; rep movsq
+ lea 168(%rax),%rax # adjust stack pointer
+ jmp .Lcommon_seh_tail
+.Lseh_no_shaext:
+___
+$code.=<<___;
+ lea 96(%rax),%rsi
+ lea 512($context),%rdi # &context.Xmm6
+ mov \$20,%ecx
+ .long 0xa548f3fc # cld; rep movsq
+ lea `104+10*16`(%rax),%rax # adjust stack pointer
+
+ mov 0(%rax),%r15
+ mov 8(%rax),%r14
+ mov 16(%rax),%r13
+ mov 24(%rax),%r12
+ mov 32(%rax),%rbp
+ mov 40(%rax),%rbx
+ lea 48(%rax),%rax
+ mov %rbx,144($context) # restore context->Rbx
+ mov %rbp,160($context) # restore context->Rbp
+ mov %r12,216($context) # restore context->R12
+ mov %r13,224($context) # restore context->R13
+ mov %r14,232($context) # restore context->R14
+ mov %r15,240($context) # restore context->R15
+
+.Lcommon_seh_tail:
+ mov 8(%rax),%rdi
+ mov 16(%rax),%rsi
+ mov %rax,152($context) # restore context->Rsp
+ mov %rsi,168($context) # restore context->Rsi
+ mov %rdi,176($context) # restore context->Rdi
+
+ mov 40($disp),%rdi # disp->ContextRecord
+ mov $context,%rsi # context
+ mov \$154,%ecx # sizeof(CONTEXT)
+ .long 0xa548f3fc # cld; rep movsq
+
+ mov $disp,%rsi
+ xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
+ mov 8(%rsi),%rdx # arg2, disp->ImageBase
+ mov 0(%rsi),%r8 # arg3, disp->ControlPc
+ mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
+ mov 40(%rsi),%r10 # disp->ContextRecord
+ lea 56(%rsi),%r11 # &disp->HandlerData
+ lea 24(%rsi),%r12 # &disp->EstablisherFrame
+ mov %r10,32(%rsp) # arg5
+ mov %r11,40(%rsp) # arg6
+ mov %r12,48(%rsp) # arg7
+ mov %rcx,56(%rsp) # arg8, (NULL)
+ call *__imp_RtlVirtualUnwind(%rip)
+
+ mov \$1,%eax # ExceptionContinueSearch
+ add \$64,%rsp
+ popfq
+ pop %r15
+ pop %r14
+ pop %r13
+ pop %r12
+ pop %rbp
+ pop %rbx
+ pop %rdi
+ pop %rsi
+ ret
+.size ssse3_handler,.-ssse3_handler
+
+.section .pdata
+.align 4
+ .rva .LSEH_begin_aesni_cbc_sha1_enc_ssse3
+ .rva .LSEH_end_aesni_cbc_sha1_enc_ssse3
+ .rva .LSEH_info_aesni_cbc_sha1_enc_ssse3
+___
+$code.=<<___ if ($avx);
+ .rva .LSEH_begin_aesni_cbc_sha1_enc_avx
+ .rva .LSEH_end_aesni_cbc_sha1_enc_avx
+ .rva .LSEH_info_aesni_cbc_sha1_enc_avx
+___
+$code.=<<___ if ($shaext);
+ .rva .LSEH_begin_aesni_cbc_sha1_enc_shaext
+ .rva .LSEH_end_aesni_cbc_sha1_enc_shaext
+ .rva .LSEH_info_aesni_cbc_sha1_enc_shaext
+___
+$code.=<<___;
+.section .xdata
+.align 8
+.LSEH_info_aesni_cbc_sha1_enc_ssse3:
+ .byte 9,0,0,0
+ .rva ssse3_handler
+ .rva .Lprologue_ssse3,.Lepilogue_ssse3 # HandlerData[]
+___
+$code.=<<___ if ($avx);
+.LSEH_info_aesni_cbc_sha1_enc_avx:
+ .byte 9,0,0,0
+ .rva ssse3_handler
+ .rva .Lprologue_avx,.Lepilogue_avx # HandlerData[]
+___
+$code.=<<___ if ($shaext);
+.LSEH_info_aesni_cbc_sha1_enc_shaext:
+ .byte 9,0,0,0
+ .rva ssse3_handler
+ .rva .Lprologue_shaext,.Lepilogue_shaext # HandlerData[]
+___
+}
+
+####################################################################
+sub rex {
+ local *opcode=shift;
+ my ($dst,$src)=@_;
+ my $rex=0;
+
+ $rex|=0x04 if($dst>=8);
+ $rex|=0x01 if($src>=8);
+ unshift @opcode,$rex|0x40 if($rex);
+}
+
+sub sha1rnds4 {
+ if (@_[0] =~ /\$([x0-9a-f]+),\s*%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ my @opcode=(0x0f,0x3a,0xcc);
+ rex(\@opcode,$3,$2);
+ push @opcode,0xc0|($2&7)|(($3&7)<<3); # ModR/M
+ my $c=$1;
+ push @opcode,$c=~/^0/?oct($c):$c;
+ return ".byte\t".join(',',@opcode);
+ } else {
+ return "sha1rnds4\t".@_[0];
+ }
+}
+
+sub sha1op38 {
+ my $instr = shift;
+ my %opcodelet = (
+ "sha1nexte" => 0xc8,
+ "sha1msg1" => 0xc9,
+ "sha1msg2" => 0xca );
+
+ if (defined($opcodelet{$instr}) && @_[0] =~ /%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ my @opcode=(0x0f,0x38);
+ rex(\@opcode,$2,$1);
+ push @opcode,$opcodelet{$instr};
+ push @opcode,0xc0|($1&7)|(($2&7)<<3); # ModR/M
+ return ".byte\t".join(',',@opcode);
+ } else {
+ return $instr."\t".@_[0];
+ }
+}
+
+sub aesni {
+ my $line=shift;
+ my @opcode=(0x0f,0x38);
+
+ if ($line=~/(aes[a-z]+)\s+%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ my %opcodelet = (
+ "aesenc" => 0xdc, "aesenclast" => 0xdd,
+ "aesdec" => 0xde, "aesdeclast" => 0xdf
+ );
+ return undef if (!defined($opcodelet{$1}));
+ rex(\@opcode,$3,$2);
+ push @opcode,$opcodelet{$1},0xc0|($2&7)|(($3&7)<<3); # ModR/M
+ unshift @opcode,0x66;
+ return ".byte\t".join(',',@opcode);
+ }
+ return $line;
+}
+
+foreach (split("\n",$code)) {
+ s/\`([^\`]*)\`/eval $1/geo;
+
+ s/\b(sha1rnds4)\s+(.*)/sha1rnds4($2)/geo or
+ s/\b(sha1[^\s]*)\s+(.*)/sha1op38($1,$2)/geo or
+ s/\b(aes.*%xmm[0-9]+).*$/aesni($1)/geo;
+
+ print $_,"\n";
+}
+close STDOUT;
generated by cgit