initial/final commitHEADmaster

1 files changed, 519 insertions, 0 deletions

diff --git a/openssl-1.1.0h/crypto/sha/asm/sha512-mips.pl b/openssl-1.1.0h/crypto/sha/asm/sha512-mips.pl
new file mode 100644
index 0000000..5c2d23f
--- /dev/null
+++ b/openssl-1.1.0h/crypto/sha/asm/sha512-mips.pl
@@ -0,0 +1,519 @@
+#! /usr/bin/env perl
+# Copyright 2010-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# SHA2 block procedures for MIPS.
+
+# October 2010.
+#
+# SHA256 performance improvement on MIPS R5000 CPU is ~27% over gcc-
+# generated code in o32 build and ~55% in n32/64 build. SHA512 [which
+# for now can only be compiled for MIPS64 ISA] improvement is modest
+# ~17%, but it comes for free, because it's same instruction sequence.
+# Improvement coefficients are for aligned input.
+
+# September 2012.
+#
+# Add MIPS[32|64]R2 code (>25% less instructions).
+
+######################################################################
+# There is a number of MIPS ABI in use, O32 and N32/64 are most
+# widely used. Then there is a new contender: NUBI. It appears that if
+# one picks the latter, it's possible to arrange code in ABI neutral
+# manner. Therefore let's stick to NUBI register layout:
+#
+($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
+($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
+($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
+#
+# The return value is placed in $a0. Following coding rules facilitate
+# interoperability:
+#
+# - never ever touch $tp, "thread pointer", former $gp [o32 can be
+#   excluded from the rule, because it's specified volatile];
+# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
+#   old code];
+# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
+#
+# For reference here is register layout for N32/64 MIPS ABIs:
+#
+# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
+# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
+# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
+# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
+#
+$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+
+if ($flavour =~ /64|n32/i) {
+	$PTR_LA="dla";
+	$PTR_ADD="dadd";	# incidentally works even on n32
+	$PTR_SUB="dsub";	# incidentally works even on n32
+	$REG_S="sd";
+	$REG_L="ld";
+	$PTR_SLL="dsll";	# incidentally works even on n32
+	$SZREG=8;
+} else {
+	$PTR_LA="la";
+	$PTR_ADD="add";
+	$PTR_SUB="sub";
+	$REG_S="sw";
+	$REG_L="lw";
+	$PTR_SLL="sll";
+	$SZREG=4;
+}
+$pf = ($flavour =~ /nubi/i) ? $t0 : $t2;
+#
+# <appro@openssl.org>
+#
+######################################################################
+
+$big_endian=(`echo MIPSEL | $ENV{CC} -E -`=~/MIPSEL/)?1:0 if ($ENV{CC});
+
+for (@ARGV) {	$output=$_ if (/\w[\w\-]*\.\w+$/);	}
+open STDOUT,">$output";
+
+if (!defined($big_endian)) { $big_endian=(unpack('L',pack('N',1))==1); }
+
+if ($output =~ /512/) {
+	$label="512";
+	$SZ=8;
+	$LD="ld";		# load from memory
+	$ST="sd";		# store to memory
+	$SLL="dsll";		# shift left logical
+	$SRL="dsrl";		# shift right logical
+	$ADDU="daddu";
+	$ROTR="drotr";
+	@Sigma0=(28,34,39);
+	@Sigma1=(14,18,41);
+	@sigma0=( 7, 1, 8);	# right shift first
+	@sigma1=( 6,19,61);	# right shift first
+	$lastK=0x817;
+	$rounds=80;
+} else {
+	$label="256";
+	$SZ=4;
+	$LD="lw";		# load from memory
+	$ST="sw";		# store to memory
+	$SLL="sll";		# shift left logical
+	$SRL="srl";		# shift right logical
+	$ADDU="addu";
+	$ROTR="rotr";
+	@Sigma0=( 2,13,22);
+	@Sigma1=( 6,11,25);
+	@sigma0=( 3, 7,18);	# right shift first
+	@sigma1=(10,17,19);	# right shift first
+	$lastK=0x8f2;
+	$rounds=64;
+}
+
+$MSB = $big_endian ? 0 : ($SZ-1);
+$LSB = ($SZ-1)&~$MSB;
+
+@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("\$$_",(1,2,3,7,24,25,30,31));
+@X=map("\$$_",(8..23));
+
+$ctx=$a0;
+$inp=$a1;
+$len=$a2;	$Ktbl=$len;
+
+sub BODY_00_15 {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+my ($T1,$tmp0,$tmp1,$tmp2)=(@X[4],@X[5],@X[6],@X[7]);
+
+$code.=<<___ if ($i<15);
+	${LD}l	@X[1],`($i+1)*$SZ+$MSB`($inp)
+	${LD}r	@X[1],`($i+1)*$SZ+$LSB`($inp)
+___
+$code.=<<___	if (!$big_endian && $i<16 && $SZ==4);
+#if defined(_MIPS_ARCH_MIPS32R2) || defined(_MIPS_ARCH_MIPS64R2)
+	wsbh	@X[0],@X[0]		# byte swap($i)
+	rotr	@X[0],@X[0],16
+#else
+	srl	$tmp0,@X[0],24		# byte swap($i)
+	srl	$tmp1,@X[0],8
+	andi	$tmp2,@X[0],0xFF00
+	sll	@X[0],@X[0],24
+	andi	$tmp1,0xFF00
+	sll	$tmp2,$tmp2,8
+	or	@X[0],$tmp0
+	or	$tmp1,$tmp2
+	or	@X[0],$tmp1
+#endif
+___
+$code.=<<___	if (!$big_endian && $i<16 && $SZ==8);
+#if defined(_MIPS_ARCH_MIPS64R2)
+	dsbh	@X[0],@X[0]		# byte swap($i)
+	dshd	@X[0],@X[0]
+#else
+	ori	$tmp0,$zero,0xFF
+	dsll	$tmp2,$tmp0,32
+	or	$tmp0,$tmp2		# 0x000000FF000000FF
+	and	$tmp1,@X[0],$tmp0	# byte swap($i)
+	dsrl	$tmp2,@X[0],24
+	dsll	$tmp1,24
+	and	$tmp2,$tmp0
+	dsll	$tmp0,8			# 0x0000FF000000FF00
+	or	$tmp1,$tmp2
+	and	$tmp2,@X[0],$tmp0
+	dsrl	@X[0],8
+	dsll	$tmp2,8
+	and	@X[0],$tmp0
+	or	$tmp1,$tmp2
+	or	@X[0],$tmp1
+	dsrl	$tmp1,@X[0],32
+	dsll	@X[0],32
+	or	@X[0],$tmp1
+#endif
+___
+$code.=<<___;
+#if defined(_MIPS_ARCH_MIPS32R2) || defined(_MIPS_ARCH_MIPS64R2)
+	xor	$tmp2,$f,$g			# $i
+	$ROTR	$tmp0,$e,@Sigma1[0]
+	$ADDU	$T1,$X[0],$h
+	$ROTR	$tmp1,$e,@Sigma1[1]
+	and	$tmp2,$e
+	$ROTR	$h,$e,@Sigma1[2]
+	xor	$tmp0,$tmp1
+	$ROTR	$tmp1,$a,@Sigma0[0]
+	xor	$tmp2,$g			# Ch(e,f,g)
+	xor	$tmp0,$h			# Sigma1(e)
+
+	$ROTR	$h,$a,@Sigma0[1]
+	$ADDU	$T1,$tmp2
+	$LD	$tmp2,`$i*$SZ`($Ktbl)		# K[$i]
+	xor	$h,$tmp1
+	$ROTR	$tmp1,$a,@Sigma0[2]
+	$ADDU	$T1,$tmp0
+	and	$tmp0,$b,$c
+	xor	$h,$tmp1			# Sigma0(a)
+	xor	$tmp1,$b,$c
+#else
+	$ADDU	$T1,$X[0],$h			# $i
+	$SRL	$h,$e,@Sigma1[0]
+	xor	$tmp2,$f,$g
+	$SLL	$tmp1,$e,`$SZ*8-@Sigma1[2]`
+	and	$tmp2,$e
+	$SRL	$tmp0,$e,@Sigma1[1]
+	xor	$h,$tmp1
+	$SLL	$tmp1,$e,`$SZ*8-@Sigma1[1]`
+	xor	$h,$tmp0
+	$SRL	$tmp0,$e,@Sigma1[2]
+	xor	$h,$tmp1
+	$SLL	$tmp1,$e,`$SZ*8-@Sigma1[0]`
+	xor	$h,$tmp0
+	xor	$tmp2,$g			# Ch(e,f,g)
+	xor	$tmp0,$tmp1,$h			# Sigma1(e)
+
+	$SRL	$h,$a,@Sigma0[0]
+	$ADDU	$T1,$tmp2
+	$LD	$tmp2,`$i*$SZ`($Ktbl)		# K[$i]
+	$SLL	$tmp1,$a,`$SZ*8-@Sigma0[2]`
+	$ADDU	$T1,$tmp0
+	$SRL	$tmp0,$a,@Sigma0[1]
+	xor	$h,$tmp1
+	$SLL	$tmp1,$a,`$SZ*8-@Sigma0[1]`
+	xor	$h,$tmp0
+	$SRL	$tmp0,$a,@Sigma0[2]
+	xor	$h,$tmp1
+	$SLL	$tmp1,$a,`$SZ*8-@Sigma0[0]`
+	xor	$h,$tmp0
+	and	$tmp0,$b,$c
+	xor	$h,$tmp1			# Sigma0(a)
+	xor	$tmp1,$b,$c
+#endif
+	$ST	@X[0],`($i%16)*$SZ`($sp)	# offload to ring buffer
+	$ADDU	$h,$tmp0
+	and	$tmp1,$a
+	$ADDU	$T1,$tmp2			# +=K[$i]
+	$ADDU	$h,$tmp1			# +=Maj(a,b,c)
+	$ADDU	$d,$T1
+	$ADDU	$h,$T1
+___
+$code.=<<___ if ($i>=13);
+	$LD	@X[3],`(($i+3)%16)*$SZ`($sp)	# prefetch from ring buffer
+___
+}
+
+sub BODY_16_XX {
+my $i=@_[0];
+my ($tmp0,$tmp1,$tmp2,$tmp3)=(@X[4],@X[5],@X[6],@X[7]);
+
+$code.=<<___;
+#if defined(_MIPS_ARCH_MIPS32R2) || defined(_MIPS_ARCH_MIPS64R2)
+	$SRL	$tmp2,@X[1],@sigma0[0]		# Xupdate($i)
+	$ROTR	$tmp0,@X[1],@sigma0[1]
+	$ADDU	@X[0],@X[9]			# +=X[i+9]
+	xor	$tmp2,$tmp0
+	$ROTR	$tmp0,@X[1],@sigma0[2]
+
+	$SRL	$tmp3,@X[14],@sigma1[0]
+	$ROTR	$tmp1,@X[14],@sigma1[1]
+	xor	$tmp2,$tmp0			# sigma0(X[i+1])
+	$ROTR	$tmp0,@X[14],@sigma1[2]
+	xor	$tmp3,$tmp1
+	$ADDU	@X[0],$tmp2
+#else
+	$SRL	$tmp2,@X[1],@sigma0[0]		# Xupdate($i)
+	$ADDU	@X[0],@X[9]			# +=X[i+9]
+	$SLL	$tmp1,@X[1],`$SZ*8-@sigma0[2]`
+	$SRL	$tmp0,@X[1],@sigma0[1]
+	xor	$tmp2,$tmp1
+	$SLL	$tmp1,`@sigma0[2]-@sigma0[1]`
+	xor	$tmp2,$tmp0
+	$SRL	$tmp0,@X[1],@sigma0[2]
+	xor	$tmp2,$tmp1
+
+	$SRL	$tmp3,@X[14],@sigma1[0]
+	xor	$tmp2,$tmp0			# sigma0(X[i+1])
+	$SLL	$tmp1,@X[14],`$SZ*8-@sigma1[2]`
+	$ADDU	@X[0],$tmp2
+	$SRL	$tmp0,@X[14],@sigma1[1]
+	xor	$tmp3,$tmp1
+	$SLL	$tmp1,`@sigma1[2]-@sigma1[1]`
+	xor	$tmp3,$tmp0
+	$SRL	$tmp0,@X[14],@sigma1[2]
+	xor	$tmp3,$tmp1
+#endif
+	xor	$tmp3,$tmp0			# sigma1(X[i+14])
+	$ADDU	@X[0],$tmp3
+___
+	&BODY_00_15(@_);
+}
+
+$FRAMESIZE=16*$SZ+16*$SZREG;
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0xc0fff008" : "0xc0ff0000";
+
+$code.=<<___;
+#ifdef OPENSSL_FIPSCANISTER
+# include <openssl/fipssyms.h>
+#endif
+
+#if defined(__mips_smartmips) && !defined(_MIPS_ARCH_MIPS32R2)
+#define _MIPS_ARCH_MIPS32R2
+#endif
+
+.text
+.set	noat
+#if !defined(__mips_eabi) && (!defined(__vxworks) || defined(__pic__))
+.option	pic2
+#endif
+
+.align	5
+.globl	sha${label}_block_data_order
+.ent	sha${label}_block_data_order
+sha${label}_block_data_order:
+	.frame	$sp,$FRAMESIZE,$ra
+	.mask	$SAVED_REGS_MASK,-$SZREG
+	.set	noreorder
+___
+$code.=<<___ if ($flavour =~ /o32/i);	# o32 PIC-ification
+	.cpload	$pf
+___
+$code.=<<___;
+	$PTR_SUB $sp,$FRAMESIZE
+	$REG_S	$ra,$FRAMESIZE-1*$SZREG($sp)
+	$REG_S	$fp,$FRAMESIZE-2*$SZREG($sp)
+	$REG_S	$s11,$FRAMESIZE-3*$SZREG($sp)
+	$REG_S	$s10,$FRAMESIZE-4*$SZREG($sp)
+	$REG_S	$s9,$FRAMESIZE-5*$SZREG($sp)
+	$REG_S	$s8,$FRAMESIZE-6*$SZREG($sp)
+	$REG_S	$s7,$FRAMESIZE-7*$SZREG($sp)
+	$REG_S	$s6,$FRAMESIZE-8*$SZREG($sp)
+	$REG_S	$s5,$FRAMESIZE-9*$SZREG($sp)
+	$REG_S	$s4,$FRAMESIZE-10*$SZREG($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
+	$REG_S	$s3,$FRAMESIZE-11*$SZREG($sp)
+	$REG_S	$s2,$FRAMESIZE-12*$SZREG($sp)
+	$REG_S	$s1,$FRAMESIZE-13*$SZREG($sp)
+	$REG_S	$s0,$FRAMESIZE-14*$SZREG($sp)
+	$REG_S	$gp,$FRAMESIZE-15*$SZREG($sp)
+___
+$code.=<<___;
+	$PTR_SLL @X[15],$len,`log(16*$SZ)/log(2)`
+___
+$code.=<<___ if ($flavour !~ /o32/i);	# non-o32 PIC-ification
+	.cplocal	$Ktbl
+	.cpsetup	$pf,$zero,sha${label}_block_data_order
+___
+$code.=<<___;
+	.set	reorder
+	$PTR_LA	$Ktbl,K${label}		# PIC-ified 'load address'
+
+	$LD	$A,0*$SZ($ctx)		# load context
+	$LD	$B,1*$SZ($ctx)
+	$LD	$C,2*$SZ($ctx)
+	$LD	$D,3*$SZ($ctx)
+	$LD	$E,4*$SZ($ctx)
+	$LD	$F,5*$SZ($ctx)
+	$LD	$G,6*$SZ($ctx)
+	$LD	$H,7*$SZ($ctx)
+
+	$PTR_ADD @X[15],$inp		# pointer to the end of input
+	$REG_S	@X[15],16*$SZ($sp)
+	b	.Loop
+
+.align	5
+.Loop:
+	${LD}l	@X[0],$MSB($inp)
+	${LD}r	@X[0],$LSB($inp)
+___
+for ($i=0;$i<16;$i++)
+{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); push(@X,shift(@X)); }
+$code.=<<___;
+	b	.L16_xx
+.align	4
+.L16_xx:
+___
+for (;$i<32;$i++)
+{ &BODY_16_XX($i,@V); unshift(@V,pop(@V)); push(@X,shift(@X)); }
+$code.=<<___;
+	and	@X[6],0xfff
+	li	@X[7],$lastK
+	.set	noreorder
+	bne	@X[6],@X[7],.L16_xx
+	$PTR_ADD $Ktbl,16*$SZ		# Ktbl+=16
+
+	$REG_L	@X[15],16*$SZ($sp)	# restore pointer to the end of input
+	$LD	@X[0],0*$SZ($ctx)
+	$LD	@X[1],1*$SZ($ctx)
+	$LD	@X[2],2*$SZ($ctx)
+	$PTR_ADD $inp,16*$SZ
+	$LD	@X[3],3*$SZ($ctx)
+	$ADDU	$A,@X[0]
+	$LD	@X[4],4*$SZ($ctx)
+	$ADDU	$B,@X[1]
+	$LD	@X[5],5*$SZ($ctx)
+	$ADDU	$C,@X[2]
+	$LD	@X[6],6*$SZ($ctx)
+	$ADDU	$D,@X[3]
+	$LD	@X[7],7*$SZ($ctx)
+	$ADDU	$E,@X[4]
+	$ST	$A,0*$SZ($ctx)
+	$ADDU	$F,@X[5]
+	$ST	$B,1*$SZ($ctx)
+	$ADDU	$G,@X[6]
+	$ST	$C,2*$SZ($ctx)
+	$ADDU	$H,@X[7]
+	$ST	$D,3*$SZ($ctx)
+	$ST	$E,4*$SZ($ctx)
+	$ST	$F,5*$SZ($ctx)
+	$ST	$G,6*$SZ($ctx)
+	$ST	$H,7*$SZ($ctx)
+
+	bne	$inp,@X[15],.Loop
+	$PTR_SUB $Ktbl,`($rounds-16)*$SZ`	# rewind $Ktbl
+
+	$REG_L	$ra,$FRAMESIZE-1*$SZREG($sp)
+	$REG_L	$fp,$FRAMESIZE-2*$SZREG($sp)
+	$REG_L	$s11,$FRAMESIZE-3*$SZREG($sp)
+	$REG_L	$s10,$FRAMESIZE-4*$SZREG($sp)
+	$REG_L	$s9,$FRAMESIZE-5*$SZREG($sp)
+	$REG_L	$s8,$FRAMESIZE-6*$SZREG($sp)
+	$REG_L	$s7,$FRAMESIZE-7*$SZREG($sp)
+	$REG_L	$s6,$FRAMESIZE-8*$SZREG($sp)
+	$REG_L	$s5,$FRAMESIZE-9*$SZREG($sp)
+	$REG_L	$s4,$FRAMESIZE-10*$SZREG($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i);
+	$REG_L	$s3,$FRAMESIZE-11*$SZREG($sp)
+	$REG_L	$s2,$FRAMESIZE-12*$SZREG($sp)
+	$REG_L	$s1,$FRAMESIZE-13*$SZREG($sp)
+	$REG_L	$s0,$FRAMESIZE-14*$SZREG($sp)
+	$REG_L	$gp,$FRAMESIZE-15*$SZREG($sp)
+___
+$code.=<<___;
+	jr	$ra
+	$PTR_ADD $sp,$FRAMESIZE
+.end	sha${label}_block_data_order
+
+.rdata
+.align	5
+K${label}:
+___
+if ($SZ==4) {
+$code.=<<___;
+	.word	0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5
+	.word	0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5
+	.word	0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3
+	.word	0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174
+	.word	0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc
+	.word	0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da
+	.word	0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7
+	.word	0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967
+	.word	0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13
+	.word	0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85
+	.word	0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3
+	.word	0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070
+	.word	0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
+	.word	0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
+	.word	0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
+	.word	0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
+___
+} else {
+$code.=<<___;
+	.dword	0x428a2f98d728ae22, 0x7137449123ef65cd
+	.dword	0xb5c0fbcfec4d3b2f, 0xe9b5dba58189dbbc
+	.dword	0x3956c25bf348b538, 0x59f111f1b605d019
+	.dword	0x923f82a4af194f9b, 0xab1c5ed5da6d8118
+	.dword	0xd807aa98a3030242, 0x12835b0145706fbe
+	.dword	0x243185be4ee4b28c, 0x550c7dc3d5ffb4e2
+	.dword	0x72be5d74f27b896f, 0x80deb1fe3b1696b1
+	.dword	0x9bdc06a725c71235, 0xc19bf174cf692694
+	.dword	0xe49b69c19ef14ad2, 0xefbe4786384f25e3
+	.dword	0x0fc19dc68b8cd5b5, 0x240ca1cc77ac9c65
+	.dword	0x2de92c6f592b0275, 0x4a7484aa6ea6e483
+	.dword	0x5cb0a9dcbd41fbd4, 0x76f988da831153b5
+	.dword	0x983e5152ee66dfab, 0xa831c66d2db43210
+	.dword	0xb00327c898fb213f, 0xbf597fc7beef0ee4
+	.dword	0xc6e00bf33da88fc2, 0xd5a79147930aa725
+	.dword	0x06ca6351e003826f, 0x142929670a0e6e70
+	.dword	0x27b70a8546d22ffc, 0x2e1b21385c26c926
+	.dword	0x4d2c6dfc5ac42aed, 0x53380d139d95b3df
+	.dword	0x650a73548baf63de, 0x766a0abb3c77b2a8
+	.dword	0x81c2c92e47edaee6, 0x92722c851482353b
+	.dword	0xa2bfe8a14cf10364, 0xa81a664bbc423001
+	.dword	0xc24b8b70d0f89791, 0xc76c51a30654be30
+	.dword	0xd192e819d6ef5218, 0xd69906245565a910
+	.dword	0xf40e35855771202a, 0x106aa07032bbd1b8
+	.dword	0x19a4c116b8d2d0c8, 0x1e376c085141ab53
+	.dword	0x2748774cdf8eeb99, 0x34b0bcb5e19b48a8
+	.dword	0x391c0cb3c5c95a63, 0x4ed8aa4ae3418acb
+	.dword	0x5b9cca4f7763e373, 0x682e6ff3d6b2b8a3
+	.dword	0x748f82ee5defb2fc, 0x78a5636f43172f60
+	.dword	0x84c87814a1f0ab72, 0x8cc702081a6439ec
+	.dword	0x90befffa23631e28, 0xa4506cebde82bde9
+	.dword	0xbef9a3f7b2c67915, 0xc67178f2e372532b
+	.dword	0xca273eceea26619c, 0xd186b8c721c0c207
+	.dword	0xeada7dd6cde0eb1e, 0xf57d4f7fee6ed178
+	.dword	0x06f067aa72176fba, 0x0a637dc5a2c898a6
+	.dword	0x113f9804bef90dae, 0x1b710b35131c471b
+	.dword	0x28db77f523047d84, 0x32caab7b40c72493
+	.dword	0x3c9ebe0a15c9bebc, 0x431d67c49c100d4c
+	.dword	0x4cc5d4becb3e42b6, 0x597f299cfc657e2a
+	.dword	0x5fcb6fab3ad6faec, 0x6c44198c4a475817
+___
+}
+$code.=<<___;
+.asciiz	"SHA${label} for MIPS, CRYPTOGAMS by <appro\@openssl.org>"
+.align	5
+
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;