initial/final commitHEADmaster

1 files changed, 742 insertions, 0 deletions

diff --git a/openssl-1.1.0h/crypto/sha/asm/sha1-armv4-large.pl b/openssl-1.1.0h/crypto/sha/asm/sha1-armv4-large.pl
new file mode 100644
index 0000000..7ff5bfb
--- /dev/null
+++ b/openssl-1.1.0h/crypto/sha/asm/sha1-armv4-large.pl
@@ -0,0 +1,742 @@
+#! /usr/bin/env perl
+# Copyright 2007-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# sha1_block procedure for ARMv4.
+#
+# January 2007.
+
+# Size/performance trade-off
+# ====================================================================
+# impl		size in bytes	comp cycles[*]	measured performance
+# ====================================================================
+# thumb		304		3212		4420
+# armv4-small	392/+29%	1958/+64%	2250/+96%
+# armv4-compact	740/+89%	1552/+26%	1840/+22%
+# armv4-large	1420/+92%	1307/+19%	1370/+34%[***]
+# full unroll	~5100/+260%	~1260/+4%	~1300/+5%
+# ====================================================================
+# thumb		= same as 'small' but in Thumb instructions[**] and
+#		  with recurring code in two private functions;
+# small		= detached Xload/update, loops are folded;
+# compact	= detached Xload/update, 5x unroll;
+# large		= interleaved Xload/update, 5x unroll;
+# full unroll	= interleaved Xload/update, full unroll, estimated[!];
+#
+# [*]	Manually counted instructions in "grand" loop body. Measured
+#	performance is affected by prologue and epilogue overhead,
+#	i-cache availability, branch penalties, etc.
+# [**]	While each Thumb instruction is twice smaller, they are not as
+#	diverse as ARM ones: e.g., there are only two arithmetic
+#	instructions with 3 arguments, no [fixed] rotate, addressing
+#	modes are limited. As result it takes more instructions to do
+#	the same job in Thumb, therefore the code is never twice as
+#	small and always slower.
+# [***]	which is also ~35% better than compiler generated code. Dual-
+#	issue Cortex A8 core was measured to process input block in
+#	~990 cycles.
+
+# August 2010.
+#
+# Rescheduling for dual-issue pipeline resulted in 13% improvement on
+# Cortex A8 core and in absolute terms ~870 cycles per input block
+# [or 13.6 cycles per byte].
+
+# February 2011.
+#
+# Profiler-assisted and platform-specific optimization resulted in 10%
+# improvement on Cortex A8 core and 12.2 cycles per byte.
+
+# September 2013.
+#
+# Add NEON implementation (see sha1-586.pl for background info). On
+# Cortex A8 it was measured to process one byte in 6.7 cycles or >80%
+# faster than integer-only code. Because [fully unrolled] NEON code
+# is ~2.5x larger and there are some redundant instructions executed
+# when processing last block, improvement is not as big for smallest
+# blocks, only ~30%. Snapdragon S4 is a tad faster, 6.4 cycles per
+# byte, which is also >80% faster than integer-only code. Cortex-A15
+# is even faster spending 5.6 cycles per byte outperforming integer-
+# only code by factor of 2.
+
+# May 2014.
+#
+# Add ARMv8 code path performing at 2.35 cpb on Apple A7.
+
+$flavour = shift;
+if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
+else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+
+if ($flavour && $flavour ne "void") {
+    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+    die "can't locate arm-xlate.pl";
+
+    open STDOUT,"| \"$^X\" $xlate $flavour $output";
+} else {
+    open STDOUT,">$output";
+}
+
+$ctx="r0";
+$inp="r1";
+$len="r2";
+$a="r3";
+$b="r4";
+$c="r5";
+$d="r6";
+$e="r7";
+$K="r8";
+$t0="r9";
+$t1="r10";
+$t2="r11";
+$t3="r12";
+$Xi="r14";
+@V=($a,$b,$c,$d,$e);
+
+sub Xupdate {
+my ($a,$b,$c,$d,$e,$opt1,$opt2)=@_;
+$code.=<<___;
+	ldr	$t0,[$Xi,#15*4]
+	ldr	$t1,[$Xi,#13*4]
+	ldr	$t2,[$Xi,#7*4]
+	add	$e,$K,$e,ror#2			@ E+=K_xx_xx
+	ldr	$t3,[$Xi,#2*4]
+	eor	$t0,$t0,$t1
+	eor	$t2,$t2,$t3			@ 1 cycle stall
+	eor	$t1,$c,$d			@ F_xx_xx
+	mov	$t0,$t0,ror#31
+	add	$e,$e,$a,ror#27			@ E+=ROR(A,27)
+	eor	$t0,$t0,$t2,ror#31
+	str	$t0,[$Xi,#-4]!
+	$opt1					@ F_xx_xx
+	$opt2					@ F_xx_xx
+	add	$e,$e,$t0			@ E+=X[i]
+___
+}
+
+sub BODY_00_15 {
+my ($a,$b,$c,$d,$e)=@_;
+$code.=<<___;
+#if __ARM_ARCH__<7
+	ldrb	$t1,[$inp,#2]
+	ldrb	$t0,[$inp,#3]
+	ldrb	$t2,[$inp,#1]
+	add	$e,$K,$e,ror#2			@ E+=K_00_19
+	ldrb	$t3,[$inp],#4
+	orr	$t0,$t0,$t1,lsl#8
+	eor	$t1,$c,$d			@ F_xx_xx
+	orr	$t0,$t0,$t2,lsl#16
+	add	$e,$e,$a,ror#27			@ E+=ROR(A,27)
+	orr	$t0,$t0,$t3,lsl#24
+#else
+	ldr	$t0,[$inp],#4			@ handles unaligned
+	add	$e,$K,$e,ror#2			@ E+=K_00_19
+	eor	$t1,$c,$d			@ F_xx_xx
+	add	$e,$e,$a,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	$t0,$t0				@ byte swap
+#endif
+#endif
+	and	$t1,$b,$t1,ror#2
+	add	$e,$e,$t0			@ E+=X[i]
+	eor	$t1,$t1,$d,ror#2		@ F_00_19(B,C,D)
+	str	$t0,[$Xi,#-4]!
+	add	$e,$e,$t1			@ E+=F_00_19(B,C,D)
+___
+}
+
+sub BODY_16_19 {
+my ($a,$b,$c,$d,$e)=@_;
+	&Xupdate(@_,"and $t1,$b,$t1,ror#2");
+$code.=<<___;
+	eor	$t1,$t1,$d,ror#2		@ F_00_19(B,C,D)
+	add	$e,$e,$t1			@ E+=F_00_19(B,C,D)
+___
+}
+
+sub BODY_20_39 {
+my ($a,$b,$c,$d,$e)=@_;
+	&Xupdate(@_,"eor $t1,$b,$t1,ror#2");
+$code.=<<___;
+	add	$e,$e,$t1			@ E+=F_20_39(B,C,D)
+___
+}
+
+sub BODY_40_59 {
+my ($a,$b,$c,$d,$e)=@_;
+	&Xupdate(@_,"and $t1,$b,$t1,ror#2","and $t2,$c,$d");
+$code.=<<___;
+	add	$e,$e,$t1			@ E+=F_40_59(B,C,D)
+	add	$e,$e,$t2,ror#2
+___
+}
+
+$code=<<___;
+#include "arm_arch.h"
+
+.text
+#if defined(__thumb2__)
+.syntax	unified
+.thumb
+#else
+.code	32
+#endif
+
+.global	sha1_block_data_order
+.type	sha1_block_data_order,%function
+
+.align	5
+sha1_block_data_order:
+#if __ARM_MAX_ARCH__>=7
+.Lsha1_block:
+	adr	r3,.Lsha1_block
+	ldr	r12,.LOPENSSL_armcap
+	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
+#ifdef	__APPLE__
+	ldr	r12,[r12]
+#endif
+	tst	r12,#ARMV8_SHA1
+	bne	.LARMv8
+	tst	r12,#ARMV7_NEON
+	bne	.LNEON
+#endif
+	stmdb	sp!,{r4-r12,lr}
+	add	$len,$inp,$len,lsl#6	@ $len to point at the end of $inp
+	ldmia	$ctx,{$a,$b,$c,$d,$e}
+.Lloop:
+	ldr	$K,.LK_00_19
+	mov	$Xi,sp
+	sub	sp,sp,#15*4
+	mov	$c,$c,ror#30
+	mov	$d,$d,ror#30
+	mov	$e,$e,ror#30		@ [6]
+.L_00_15:
+___
+for($i=0;$i<5;$i++) {
+	&BODY_00_15(@V);	unshift(@V,pop(@V));
+}
+$code.=<<___;
+#if defined(__thumb2__)
+	mov	$t3,sp
+	teq	$Xi,$t3
+#else
+	teq	$Xi,sp
+#endif
+	bne	.L_00_15		@ [((11+4)*5+2)*3]
+	sub	sp,sp,#25*4
+___
+	&BODY_00_15(@V);	unshift(@V,pop(@V));
+	&BODY_16_19(@V);	unshift(@V,pop(@V));
+	&BODY_16_19(@V);	unshift(@V,pop(@V));
+	&BODY_16_19(@V);	unshift(@V,pop(@V));
+	&BODY_16_19(@V);	unshift(@V,pop(@V));
+$code.=<<___;
+
+	ldr	$K,.LK_20_39		@ [+15+16*4]
+	cmn	sp,#0			@ [+3], clear carry to denote 20_39
+.L_20_39_or_60_79:
+___
+for($i=0;$i<5;$i++) {
+	&BODY_20_39(@V);	unshift(@V,pop(@V));
+}
+$code.=<<___;
+#if defined(__thumb2__)
+	mov	$t3,sp
+	teq	$Xi,$t3
+#else
+	teq	$Xi,sp			@ preserve carry
+#endif
+	bne	.L_20_39_or_60_79	@ [+((12+3)*5+2)*4]
+	bcs	.L_done			@ [+((12+3)*5+2)*4], spare 300 bytes
+
+	ldr	$K,.LK_40_59
+	sub	sp,sp,#20*4		@ [+2]
+.L_40_59:
+___
+for($i=0;$i<5;$i++) {
+	&BODY_40_59(@V);	unshift(@V,pop(@V));
+}
+$code.=<<___;
+#if defined(__thumb2__)
+	mov	$t3,sp
+	teq	$Xi,$t3
+#else
+	teq	$Xi,sp
+#endif
+	bne	.L_40_59		@ [+((12+5)*5+2)*4]
+
+	ldr	$K,.LK_60_79
+	sub	sp,sp,#20*4
+	cmp	sp,#0			@ set carry to denote 60_79
+	b	.L_20_39_or_60_79	@ [+4], spare 300 bytes
+.L_done:
+	add	sp,sp,#80*4		@ "deallocate" stack frame
+	ldmia	$ctx,{$K,$t0,$t1,$t2,$t3}
+	add	$a,$K,$a
+	add	$b,$t0,$b
+	add	$c,$t1,$c,ror#2
+	add	$d,$t2,$d,ror#2
+	add	$e,$t3,$e,ror#2
+	stmia	$ctx,{$a,$b,$c,$d,$e}
+	teq	$inp,$len
+	bne	.Lloop			@ [+18], total 1307
+
+#if __ARM_ARCH__>=5
+	ldmia	sp!,{r4-r12,pc}
+#else
+	ldmia	sp!,{r4-r12,lr}
+	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	bx	lr			@ interoperable with Thumb ISA:-)
+#endif
+.size	sha1_block_data_order,.-sha1_block_data_order
+
+.align	5
+.LK_00_19:	.word	0x5a827999
+.LK_20_39:	.word	0x6ed9eba1
+.LK_40_59:	.word	0x8f1bbcdc
+.LK_60_79:	.word	0xca62c1d6
+#if __ARM_MAX_ARCH__>=7
+.LOPENSSL_armcap:
+.word	OPENSSL_armcap_P-.Lsha1_block
+#endif
+.asciz	"SHA1 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+.align	5
+___
+#####################################################################
+# NEON stuff
+#
+{{{
+my @V=($a,$b,$c,$d,$e);
+my ($K_XX_XX,$Ki,$t0,$t1,$Xfer,$saved_sp)=map("r$_",(8..12,14));
+my $Xi=4;
+my @X=map("q$_",(8..11,0..3));
+my @Tx=("q12","q13");
+my ($K,$zero)=("q14","q15");
+my $j=0;
+
+sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+  my $arg = pop;
+    $arg = "#$arg" if ($arg*1 eq $arg);
+    $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+sub body_00_19 () {
+	(
+	'($a,$b,$c,$d,$e)=@V;'.		# '$code.="@ $j\n";'.
+	'&bic	($t0,$d,$b)',
+	'&add	($e,$e,$Ki)',		# e+=X[i]+K
+	'&and	($t1,$c,$b)',
+	'&ldr	($Ki,sprintf "[sp,#%d]",4*(($j+1)&15))',
+	'&add	($e,$e,$a,"ror#27")',	# e+=ROR(A,27)
+	'&eor	($t1,$t1,$t0)',		# F_00_19
+	'&mov	($b,$b,"ror#2")',	# b=ROR(b,2)
+	'&add	($e,$e,$t1);'.		# e+=F_00_19
+	'$j++;	unshift(@V,pop(@V));'
+	)
+}
+sub body_20_39 () {
+	(
+	'($a,$b,$c,$d,$e)=@V;'.		# '$code.="@ $j\n";'.
+	'&eor	($t0,$b,$d)',
+	'&add	($e,$e,$Ki)',		# e+=X[i]+K
+	'&ldr	($Ki,sprintf "[sp,#%d]",4*(($j+1)&15)) if ($j<79)',
+	'&eor	($t1,$t0,$c)',		# F_20_39
+	'&add	($e,$e,$a,"ror#27")',	# e+=ROR(A,27)
+	'&mov	($b,$b,"ror#2")',	# b=ROR(b,2)
+	'&add	($e,$e,$t1);'.		# e+=F_20_39
+	'$j++;	unshift(@V,pop(@V));'
+	)
+}
+sub body_40_59 () {
+	(
+	'($a,$b,$c,$d,$e)=@V;'.		# '$code.="@ $j\n";'.
+	'&add	($e,$e,$Ki)',		# e+=X[i]+K
+	'&and	($t0,$c,$d)',
+	'&ldr	($Ki,sprintf "[sp,#%d]",4*(($j+1)&15))',
+	'&add	($e,$e,$a,"ror#27")',	# e+=ROR(A,27)
+	'&eor	($t1,$c,$d)',
+	'&add	($e,$e,$t0)',
+	'&and	($t1,$t1,$b)',
+	'&mov	($b,$b,"ror#2")',	# b=ROR(b,2)
+	'&add	($e,$e,$t1);'.		# e+=F_40_59
+	'$j++;	unshift(@V,pop(@V));'
+	)
+}
+
+sub Xupdate_16_31 ()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e);
+
+	&vext_8		(@X[0],@X[-4&7],@X[-3&7],8);	# compose "X[-14]" in "X[0]"
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &vadd_i32	(@Tx[1],@X[-1&7],$K);
+	 eval(shift(@insns));
+	  &vld1_32	("{$K\[]}","[$K_XX_XX,:32]!")	if ($Xi%5==0);
+	 eval(shift(@insns));
+	&vext_8		(@Tx[0],@X[-1&7],$zero,4);	# "X[-3]", 3 words
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&veor		(@X[0],@X[0],@X[-4&7]);		# "X[0]"^="X[-16]"
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&veor		(@Tx[0],@Tx[0],@X[-2&7]);	# "X[-3]"^"X[-8]"
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&veor		(@Tx[0],@Tx[0],@X[0]);		# "X[0]"^="X[-3]"^"X[-8]
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &vst1_32	("{@Tx[1]}","[$Xfer,:128]!");	# X[]+K xfer
+	  &sub		($Xfer,$Xfer,64)		if ($Xi%4==0);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vext_8		(@Tx[1],$zero,@Tx[0],4);	# "X[0]"<<96, extract one dword
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vadd_i32	(@X[0],@Tx[0],@Tx[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vsri_32	(@X[0],@Tx[0],31);		# "X[0]"<<<=1
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vshr_u32	(@Tx[0],@Tx[1],30);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vshl_u32	(@Tx[1],@Tx[1],2);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&veor		(@X[0],@X[0],@Tx[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&veor		(@X[0],@X[0],@Tx[1]);		# "X[0]"^=("X[0]">>96)<<<2
+
+	foreach (@insns) { eval; }	# remaining instructions [if any]
+
+  $Xi++;	push(@X,shift(@X));	# "rotate" X[]
+}
+
+sub Xupdate_32_79 ()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e);
+
+	&vext_8		(@Tx[0],@X[-2&7],@X[-1&7],8);	# compose "X[-6]"
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&veor		(@X[0],@X[0],@X[-4&7]);		# "X[0]"="X[-32]"^"X[-16]"
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&veor		(@X[0],@X[0],@X[-7&7]);		# "X[0]"^="X[-28]"
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &vadd_i32	(@Tx[1],@X[-1&7],$K);
+	 eval(shift(@insns));
+	  &vld1_32	("{$K\[]}","[$K_XX_XX,:32]!")	if ($Xi%5==0);
+	 eval(shift(@insns));
+	&veor		(@Tx[0],@Tx[0],@X[0]);		# "X[-6]"^="X[0]"
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vshr_u32	(@X[0],@Tx[0],30);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &vst1_32	("{@Tx[1]}","[$Xfer,:128]!");	# X[]+K xfer
+	  &sub		($Xfer,$Xfer,64)		if ($Xi%4==0);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vsli_32	(@X[0],@Tx[0],2);		# "X[0]"="X[-6]"<<<2
+
+	foreach (@insns) { eval; }	# remaining instructions [if any]
+
+  $Xi++;	push(@X,shift(@X));	# "rotate" X[]
+}
+
+sub Xuplast_80 ()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e);
+
+	&vadd_i32	(@Tx[1],@X[-1&7],$K);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vst1_32	("{@Tx[1]}","[$Xfer,:128]!");
+	&sub		($Xfer,$Xfer,64);
+
+	&teq		($inp,$len);
+	&sub		($K_XX_XX,$K_XX_XX,16);	# rewind $K_XX_XX
+	&it		("eq");
+	&subeq		($inp,$inp,64);		# reload last block to avoid SEGV
+	&vld1_8		("{@X[-4&7]-@X[-3&7]}","[$inp]!");
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vld1_8		("{@X[-2&7]-@X[-1&7]}","[$inp]!");
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vld1_32	("{$K\[]}","[$K_XX_XX,:32]!");	# load K_00_19
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vrev32_8	(@X[-4&7],@X[-4&7]);
+
+	foreach (@insns) { eval; }		# remaining instructions
+
+   $Xi=0;
+}
+
+sub Xloop()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e);
+
+	&vrev32_8	(@X[($Xi-3)&7],@X[($Xi-3)&7]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vadd_i32	(@X[$Xi&7],@X[($Xi-4)&7],$K);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&vst1_32	("{@X[$Xi&7]}","[$Xfer,:128]!");# X[]+K xfer to IALU
+
+	foreach (@insns) { eval; }
+
+  $Xi++;
+}
+
+$code.=<<___;
+#if __ARM_MAX_ARCH__>=7
+.arch	armv7-a
+.fpu	neon
+
+.type	sha1_block_data_order_neon,%function
+.align	4
+sha1_block_data_order_neon:
+.LNEON:
+	stmdb	sp!,{r4-r12,lr}
+	add	$len,$inp,$len,lsl#6	@ $len to point at the end of $inp
+	@ dmb				@ errata #451034 on early Cortex A8
+	@ vstmdb	sp!,{d8-d15}	@ ABI specification says so
+	mov	$saved_sp,sp
+	sub	$Xfer,sp,#64
+	adr	$K_XX_XX,.LK_00_19
+	bic	$Xfer,$Xfer,#15		@ align for 128-bit stores
+
+	ldmia	$ctx,{$a,$b,$c,$d,$e}	@ load context
+	mov	sp,$Xfer		@ alloca
+
+	vld1.8		{@X[-4&7]-@X[-3&7]},[$inp]!	@ handles unaligned
+	veor		$zero,$zero,$zero
+	vld1.8		{@X[-2&7]-@X[-1&7]},[$inp]!
+	vld1.32		{${K}\[]},[$K_XX_XX,:32]!	@ load K_00_19
+	vrev32.8	@X[-4&7],@X[-4&7]		@ yes, even on
+	vrev32.8	@X[-3&7],@X[-3&7]		@ big-endian...
+	vrev32.8	@X[-2&7],@X[-2&7]
+	vadd.i32	@X[0],@X[-4&7],$K
+	vrev32.8	@X[-1&7],@X[-1&7]
+	vadd.i32	@X[1],@X[-3&7],$K
+	vst1.32		{@X[0]},[$Xfer,:128]!
+	vadd.i32	@X[2],@X[-2&7],$K
+	vst1.32		{@X[1]},[$Xfer,:128]!
+	vst1.32		{@X[2]},[$Xfer,:128]!
+	ldr		$Ki,[sp]			@ big RAW stall
+
+.Loop_neon:
+___
+	&Xupdate_16_31(\&body_00_19);
+	&Xupdate_16_31(\&body_00_19);
+	&Xupdate_16_31(\&body_00_19);
+	&Xupdate_16_31(\&body_00_19);
+	&Xupdate_32_79(\&body_00_19);
+	&Xupdate_32_79(\&body_20_39);
+	&Xupdate_32_79(\&body_20_39);
+	&Xupdate_32_79(\&body_20_39);
+	&Xupdate_32_79(\&body_20_39);
+	&Xupdate_32_79(\&body_20_39);
+	&Xupdate_32_79(\&body_40_59);
+	&Xupdate_32_79(\&body_40_59);
+	&Xupdate_32_79(\&body_40_59);
+	&Xupdate_32_79(\&body_40_59);
+	&Xupdate_32_79(\&body_40_59);
+	&Xupdate_32_79(\&body_20_39);
+	&Xuplast_80(\&body_20_39);
+	&Xloop(\&body_20_39);
+	&Xloop(\&body_20_39);
+	&Xloop(\&body_20_39);
+$code.=<<___;
+	ldmia	$ctx,{$Ki,$t0,$t1,$Xfer}	@ accumulate context
+	add	$a,$a,$Ki
+	ldr	$Ki,[$ctx,#16]
+	add	$b,$b,$t0
+	add	$c,$c,$t1
+	add	$d,$d,$Xfer
+	it	eq
+	moveq	sp,$saved_sp
+	add	$e,$e,$Ki
+	it	ne
+	ldrne	$Ki,[sp]
+	stmia	$ctx,{$a,$b,$c,$d,$e}
+	itt	ne
+	addne	$Xfer,sp,#3*16
+	bne	.Loop_neon
+
+	@ vldmia	sp!,{d8-d15}
+	ldmia	sp!,{r4-r12,pc}
+.size	sha1_block_data_order_neon,.-sha1_block_data_order_neon
+#endif
+___
+}}}
+#####################################################################
+# ARMv8 stuff
+#
+{{{
+my ($ABCD,$E,$E0,$E1)=map("q$_",(0..3));
+my @MSG=map("q$_",(4..7));
+my @Kxx=map("q$_",(8..11));
+my ($W0,$W1,$ABCD_SAVE)=map("q$_",(12..14));
+
+$code.=<<___;
+#if __ARM_MAX_ARCH__>=7
+
+# if defined(__thumb2__)
+#  define INST(a,b,c,d)	.byte	c,d|0xf,a,b
+# else
+#  define INST(a,b,c,d)	.byte	a,b,c,d|0x10
+# endif
+
+.type	sha1_block_data_order_armv8,%function
+.align	5
+sha1_block_data_order_armv8:
+.LARMv8:
+	vstmdb	sp!,{d8-d15}		@ ABI specification says so
+
+	veor	$E,$E,$E
+	adr	r3,.LK_00_19
+	vld1.32	{$ABCD},[$ctx]!
+	vld1.32	{$E\[0]},[$ctx]
+	sub	$ctx,$ctx,#16
+	vld1.32	{@Kxx[0]\[]},[r3,:32]!
+	vld1.32	{@Kxx[1]\[]},[r3,:32]!
+	vld1.32	{@Kxx[2]\[]},[r3,:32]!
+	vld1.32	{@Kxx[3]\[]},[r3,:32]
+
+.Loop_v8:
+	vld1.8		{@MSG[0]-@MSG[1]},[$inp]!
+	vld1.8		{@MSG[2]-@MSG[3]},[$inp]!
+	vrev32.8	@MSG[0],@MSG[0]
+	vrev32.8	@MSG[1],@MSG[1]
+
+	vadd.i32	$W0,@Kxx[0],@MSG[0]
+	vrev32.8	@MSG[2],@MSG[2]
+	vmov		$ABCD_SAVE,$ABCD	@ offload
+	subs		$len,$len,#1
+
+	vadd.i32	$W1,@Kxx[0],@MSG[1]
+	vrev32.8	@MSG[3],@MSG[3]
+	sha1h		$E1,$ABCD		@ 0
+	sha1c		$ABCD,$E,$W0
+	vadd.i32	$W0,@Kxx[$j],@MSG[2]
+	sha1su0		@MSG[0],@MSG[1],@MSG[2]
+___
+for ($j=0,$i=1;$i<20-3;$i++) {
+my $f=("c","p","m","p")[$i/5];
+$code.=<<___;
+	sha1h		$E0,$ABCD		@ $i
+	sha1$f		$ABCD,$E1,$W1
+	vadd.i32	$W1,@Kxx[$j],@MSG[3]
+	sha1su1		@MSG[0],@MSG[3]
+___
+$code.=<<___ if ($i<20-4);
+	sha1su0		@MSG[1],@MSG[2],@MSG[3]
+___
+	($E0,$E1)=($E1,$E0);	($W0,$W1)=($W1,$W0);
+	push(@MSG,shift(@MSG));	$j++ if ((($i+3)%5)==0);
+}
+$code.=<<___;
+	sha1h		$E0,$ABCD		@ $i
+	sha1p		$ABCD,$E1,$W1
+	vadd.i32	$W1,@Kxx[$j],@MSG[3]
+
+	sha1h		$E1,$ABCD		@ 18
+	sha1p		$ABCD,$E0,$W0
+
+	sha1h		$E0,$ABCD		@ 19
+	sha1p		$ABCD,$E1,$W1
+
+	vadd.i32	$E,$E,$E0
+	vadd.i32	$ABCD,$ABCD,$ABCD_SAVE
+	bne		.Loop_v8
+
+	vst1.32		{$ABCD},[$ctx]!
+	vst1.32		{$E\[0]},[$ctx]
+
+	vldmia	sp!,{d8-d15}
+	ret					@ bx lr
+.size	sha1_block_data_order_armv8,.-sha1_block_data_order_armv8
+#endif
+___
+}}}
+$code.=<<___;
+#if __ARM_MAX_ARCH__>=7
+.comm	OPENSSL_armcap_P,4,4
+#endif
+___
+
+{   my  %opcode = (
+	"sha1c"		=> 0xf2000c40,	"sha1p"		=> 0xf2100c40,
+	"sha1m"		=> 0xf2200c40,	"sha1su0"	=> 0xf2300c40,
+	"sha1h"		=> 0xf3b902c0,	"sha1su1"	=> 0xf3ba0380	);
+
+    sub unsha1 {
+	my ($mnemonic,$arg)=@_;
+
+	if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) {
+	    my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
+					 |(($2&7)<<17)|(($2&8)<<4)
+					 |(($3&7)<<1) |(($3&8)<<2);
+	    # since ARMv7 instructions are always encoded little-endian.
+	    # correct solution is to use .inst directive, but older
+	    # assemblers don't implement it:-(
+
+	    # this fix-up provides Thumb encoding in conjunction with INST
+	    $word &= ~0x10000000 if (($word & 0x0f000000) == 0x02000000);
+	    sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s",
+			$word&0xff,($word>>8)&0xff,
+			($word>>16)&0xff,($word>>24)&0xff,
+			$mnemonic,$arg;
+	}
+    }
+}
+
+foreach (split($/,$code)) {
+	s/{q([0-9]+)\[\]}/sprintf "{d%d[],d%d[]}",2*$1,2*$1+1/eo	or
+	s/{q([0-9]+)\[0\]}/sprintf "{d%d[0]}",2*$1/eo;
+
+	s/\b(sha1\w+)\s+(q.*)/unsha1($1,$2)/geo;
+
+	s/\bret\b/bx	lr/o		or
+	s/\bbx\s+lr\b/.word\t0xe12fff1e/o;	# make it possible to compile with -march=armv4
+
+	print $_,$/;
+}
+
+close STDOUT; # enforce flush