check in the sample Exim4 config

4 files changed, 1150 insertions, 6 deletions

diff --git a/LICENSES/GPL-2.0-or-later.txt b/LICENSES/GPL-2.0-or-later.txt
new file mode 100644
index 0000000..17cb286
--- /dev/null
+++ b/LICENSES/GPL-2.0-or-later.txt
@@ -0,0 +1,117 @@
+GNU GENERAL PUBLIC LICENSE
+Version 2, June 1991
+
+Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+
+Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
+
+Preamble
+
+The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
+
+When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.
+
+To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
+
+For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
+
+We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
+
+Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
+
+Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
+
+The precise terms and conditions for copying, distribution and modification follow.
+
+TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.
+
+1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
+
+2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
+
+     a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
+
+     b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
+
+     c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
+
+3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:
+
+     a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
+
+     b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
+
+     c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
+
+If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
+
+4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
+
+5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
+
+6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.
+
+7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
+
+This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
+
+8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
+
+9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.
+
+10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
+
+NO WARRANTY
+
+11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+END OF TERMS AND CONDITIONS
+
+How to Apply These Terms to Your New Programs
+
+If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
+
+To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
+
+     one line to give the program's name and an idea of what it does. Copyright (C) yyyy name of author
+
+     This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
+
+     This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+     You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
+
+     Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:
+
+     Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice
diff --git a/README.md b/README.md
index fff53d9..68e5ba0 100644
--- a/README.md
+++ b/README.md
@@ -45,7 +45,7 @@ sudo systemctl start guix-container
 or by the good old SysV init with
 
 ```shell
-suso service guix-container start
+sudo service guix-container start
 ```
 
 You can of course also use other systemd or SysV init commands to manage the
@@ -56,7 +56,12 @@ available.
 
 ## Copying
 
-Contents of this repository are Copyright (C) 2022 Wojtek Kosior.
-The repository is [REUSE](https://reuse.software/)-compliant. Please look at
-the SPDX identifiers to determine the licensing of particular files or use the
-`reuse spdx` command to get a complete report.
+The configuration as a whole is available under GPL-2.0-or-later.
+Most of the code is Copyright (C) 2022-2023 Wojtek Kosior — this part is
+additionally available under the terms of CC0-1.0.
+This repository is [REUSE](https://reuse.software/)-compliant.
+Please look at the SPDX identifiers to determine the licensing of particular
+files or use the `reuse spdx` command to get a complete report.
+
+The above only concerns the contents of this git repository.
+The subrepos linked from here may be governed by different distribution terms.
diff --git a/README.md.license b/README.md.license
index baf2b81..fde7330 100644
--- a/README.md.license
+++ b/README.md.license
@@ -1,5 +1,5 @@
 SPDX-License-Identifier: CC0-1.0
 
-Copyright (C) 2022 Wojtek Kosior
+Copyright (C) 2022-2023 Wojtek Kosior
 
 Available under the terms of Creative Commons Zero v1.0 Universal.
diff --git a/exim4.conf b/exim4.conf
new file mode 100644
index 0000000..23da0b9
--- /dev/null
+++ b/exim4.conf
@@ -0,0 +1,1022 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2004-2023 University of Cambridge
+
+######################################################################
+#                  Runtime configuration file for Exim               #
+######################################################################
+
+
+# This is a default configuration file which will operate correctly in
+# uncomplicated installations. Please see the manual for a complete list
+# of all the runtime configuration options that can be included in a
+# configuration file. There are many more than are mentioned here. The
+# manual is in the file doc/spec.txt in the Exim distribution as a plain
+# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available
+# from the Exim ftp sites. The manual is also online at the Exim website.
+
+
+# This file is divided into several parts, all but the first of which are
+# headed by a line starting with the word "begin". Only those parts that
+# are required need to be present. Blank lines, and lines starting with #
+# are ignored.
+
+
+########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########
+#                                                                          #
+# Whenever you change Exim's configuration file, you *must* remember to    #
+# HUP the Exim daemon, because it will not pick up the new configuration   #
+# until you do. However, any other Exim processes that are started, for    #
+# example, a process started by an MUA in order to send a message, will    #
+# see the new configuration as soon as it is in place.                     #
+#                                                                          #
+# You do not need to HUP the daemon for changes in auxiliary files that    #
+# are referenced from this file. They are read every time they are used.   #
+#                                                                          #
+# It is usually a good idea to test a new configuration for syntactic      #
+# correctness before installing it (for example, by running the command    #
+# "exim -C /config/file.new -bV").                                         #
+#                                                                          #
+########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########
+
+
+
+######################################################################
+#                               MACROS                               #
+######################################################################
+#
+
+# If you want to use a smarthost instead of sending directly to recipient
+# domains, uncomment this macro definition and set a real hostname.
+# An appropriately privileged user can then redirect email on the command-line
+# in emergencies, via -D.
+#
+# ROUTER_SMARTHOST=MAIL.HOSTNAME.FOR.CENTRAL.SERVER.EXAMPLE
+
+######################################################################
+#                    MAIN CONFIGURATION SETTINGS                     #
+######################################################################
+#
+
+# Specify your host's canonical name here. This should normally be the fully
+# qualified "official" name of your host. If this option is not set, the
+# uname() function is called to obtain the name. In many cases this does
+# the right thing and you need not set anything explicitly.
+
+# primary_hostname =
+
+
+# The next three settings create two lists of domains and one list of hosts.
+# These lists are referred to later in this configuration using the syntax
+# +local_domains, +relay_to_domains, and +relay_from_hosts, respectively. They
+# are all colon-separated lists:
+
+domainlist local_domains = @
+domainlist relay_to_domains =
+hostlist   relay_from_hosts = localhost
+# (We rely upon hostname resolution working for localhost, because the default
+# uncommented configuration needs to work in IPv4-only environments.)
+
+# Most straightforward access control requirements can be obtained by
+# appropriate settings of the above options. In more complicated situations,
+# you may need to modify the Access Control Lists (ACLs) which appear later in
+# this file.
+
+# The first setting specifies your local domains, for example:
+#
+#   domainlist local_domains = my.first.domain : my.second.domain
+#
+# You can use "@" to mean "the name of the local host", as in the default
+# setting above. This is the name that is specified by primary_hostname,
+# as specified above (or defaulted). If you do not want to do any local
+# deliveries, remove the "@" from the setting above. If you want to accept mail
+# addressed to your host's literal IP address, for example, mail addressed to
+# "user@[192.168.23.44]", you can add "@[]" as an item in the local domains
+# list. You also need to uncomment "allow_domain_literals" below. This is not
+# recommended for today's Internet.
+
+# The second setting specifies domains for which your host is an incoming relay.
+# If you are not doing any relaying, you should leave the list empty. However,
+# if your host is an MX backup or gateway of some kind for some domains, you
+# must set relay_to_domains to match those domains. For example:
+#
+# domainlist relay_to_domains = *.myco.com : my.friend.org
+#
+# This will allow any host to relay through your host to those domains.
+# See the section of the manual entitled "Control of relaying" for more
+# information.
+
+# The third setting specifies hosts that can use your host as an outgoing relay
+# to any other host on the Internet. Such a setting commonly refers to a
+# complete local network as well as the localhost. For example:
+#
+# hostlist relay_from_hosts = <; 127.0.0.1 ; ::1 ; 192.168.0.0/16
+#
+# The "/16" is a bit mask (CIDR notation), not a number of hosts. Note that you
+# have to include 127.0.0.1 if you want to allow processes on your host to send
+# SMTP mail by using the loopback address. A number of MUAs use this method of
+# sending mail.  Often, connections are made to "localhost", which might be ::1
+# on IPv6-enabled hosts.  Do not forget CIDR for your IPv6 networks.
+
+# All three of these lists may contain many different kinds of item, including
+# wildcarded names, regular expressions, and file lookups. See the reference
+# manual for details. The lists above are used in the access control lists for
+# checking incoming messages. The names of these ACLs are defined here:
+
+acl_smtp_rcpt =         acl_check_rcpt
+.ifdef _HAVE_PRDR
+acl_smtp_data_prdr =    acl_check_prdr
+.endif
+acl_smtp_data =         acl_check_data
+
+# You should not change those settings until you understand how ACLs work.
+
+
+# If you are running a version of Exim that was compiled with the content-
+# scanning extension, you can cause incoming messages to be automatically
+# scanned for viruses. You have to modify the configuration in two places to
+# set this up. The first of them is here, where you define the interface to
+# your scanner. This example is typical for ClamAV; see the manual for details
+# of what to set for other virus scanners. The second modification is in the
+# acl_check_data access control list (see below).
+
+# av_scanner = clamd:/tmp/clamd
+
+
+# For spam scanning, there is a similar option that defines the interface to
+# SpamAssassin. You do not need to set this if you are using the default, which
+# is shown in this commented example. As for virus scanning, you must also
+# modify the acl_check_data access control list to enable spam scanning.
+
+# spamd_address = 127.0.0.1 783
+
+
+# If Exim is compiled with support for TLS, you may want to change the
+# following option so that Exim disallows certain clients from makeing encrypted
+# connections. The default is to allow all.
+# In the authenticators section below, there are template configurations for
+# plaintext username/password authentication. This kind of authentication is
+# only safe when used within a TLS connection, so the authenticators will only
+# work if TLS is allowed here.
+
+# This is equivalent to the default.
+
+# tls_advertise_hosts = *
+
+# Specify the location of the Exim server's TLS certificate and private key.
+# The private key must not be encrypted (password protected). You can put
+# the certificate and private key in the same file, in which case you only
+# need the first setting, or in separate files, in which case you need both
+# options.
+
+# tls_certificate = /etc/ssl/exim.crt
+# tls_privatekey = /etc/ssl/exim.pem
+
+# For OpenSSL, prefer EC- over RSA-authenticated ciphers
+.ifdef _HAVE_OPENSSL
+tls_require_ciphers = ECDSA:RSA:!COMPLEMENTOFDEFAULT
+.endif
+
+# Don't offer resumption to (most) MUAs, who we don't want to reuse
+# tickets.  Once the TLS extension for vended ticket numbers comes
+# though, re-examine since resumption on a single-use ticket is still a benefit.
+.ifdef _HAVE_TLS_RESUME
+tls_resumption_hosts = ${if inlist {$received_port}{587:465} {:}{*}}
+.endif
+
+# In order to support roaming users who wish to send email from anywhere,
+# you may want to make Exim listen on other ports as well as port 25, in
+# case these users need to send email from a network that blocks port 25.
+# The standard ports for this purpose are:
+# port 587, the "message submission" port - see RFC 4409 for details,
+# and 465 the TLS-encrypted "submission" port, service name is "submissions",
+# see RFC 8314.
+
+# Microsoft MUAs cannot be configured to
+# talk the message submission protocol correctly, so if you need to support
+# them you should also allow TLS-on-connect on the traditional (and now
+# standard) port 465.
+
+# daemon_smtp_ports = 25 : 465 : 587
+# tls_on_connect_ports = 465
+
+
+# Specify the domain you want to be added to all unqualified addresses
+# here. An unqualified address is one that does not contain an "@" character
+# followed by a domain. For example, "caesar@rome.example" is a fully qualified
+# address, but the string "caesar" (i.e. just a login name) is an unqualified
+# email address. Unqualified addresses are accepted only from local callers by
+# default. See the recipient_unqualified_hosts option if you want to permit
+# unqualified addresses from remote sources. If this option is not set, the
+# primary_hostname value is used for qualification.
+
+# qualify_domain =
+
+
+# If you want unqualified recipient addresses to be qualified with a different
+# domain to unqualified sender addresses, specify the recipient domain here.
+# If this option is not set, the qualify_domain value is used.
+
+# qualify_recipient =
+
+
+# The following line must be uncommented if you want Exim to recognize
+# addresses of the form "user@[10.11.12.13]" that is, with a "domain literal"
+# (an IP address) instead of a named domain. The RFCs still require this form,
+# but it makes little sense to permit mail to be sent to specific hosts by
+# their IP address in the modern Internet. This ancient format has been used
+# by those seeking to abuse hosts by using them for unwanted relaying. If you
+# really do want to support domain literals, uncomment the following line, and
+# see also the "domain_literal" router below.
+
+# allow_domain_literals
+
+
+# No deliveries will ever be run under the uids of users specified by
+# never_users (a colon-separated list). An attempt to do so causes a panic
+# error to be logged, and the delivery to be deferred. This is a paranoic
+# safety catch. There is an even stronger safety catch in the form of the
+# FIXED_NEVER_USERS setting in the configuration for building Exim. The list of
+# users that it specifies is built into the binary, and cannot be changed. The
+# option below just adds additional users to the list. The default for
+# FIXED_NEVER_USERS is "root", but just to be absolutely sure, the default here
+# is also "root".
+
+# Note that the default setting means you cannot deliver mail addressed to root
+# as if it were a normal user. This isn't usually a problem, as most sites have
+# an alias for root that redirects such mail to a human administrator.
+
+never_users = root
+
+
+# The setting below causes Exim to do a reverse DNS lookup on all incoming
+# IP calls, in order to get the true host name. If you feel this is too
+# expensive, you can specify the networks for which a lookup is done, or
+# remove the setting entirely.
+
+host_lookup = *
+
+
+# The setting below causes Exim to try to initialize the system resolver
+# library with DNSSEC support.  It has no effect if your library lacks
+# DNSSEC support.
+
+dns_dnssec_ok = 1
+
+
+# The settings below cause Exim to make RFC 1413 (ident) callbacks
+# for all incoming SMTP calls. You can limit the hosts to which these
+# calls are made, and/or change the timeout that is used. If you set
+# the timeout to zero, all RFC 1413 calls are disabled. RFC 1413 calls
+# are cheap and can provide useful information for tracing problem
+# messages, but some hosts and firewalls have problems with them.
+# This can result in a timeout instead of an immediate refused
+# connection, leading to delays on starting up SMTP sessions.
+# (The default was reduced from 30s to 5s for release 4.61. and to
+# disabled for release 4.86)
+#
+#rfc1413_hosts = *
+#rfc1413_query_timeout = 5s
+
+
+# Enable an efficiency feature.  We advertise the feature; clients
+# may request to use it.  For multi-recipient mails we then can
+# reject or accept per-user after the message is received.
+# This supports recipient-dependent content filtering; without it
+# you have to temp-reject any recipients after the first that have
+# incompatible filtering, and do the filtering in the data ACL.
+# Even with this enabled, you must support the old style for peers
+# not flagging support for PRDR (visible via $prdr_requested).
+#
+.ifdef _HAVE_PRDR
+prdr_enable = true
+.endif
+
+
+# By default, Exim expects all envelope addresses to be fully qualified, that
+# is, they must contain both a local part and a domain. If you want to accept
+# unqualified addresses (just a local part) from certain hosts, you can specify
+# these hosts by setting one or both of
+#
+# sender_unqualified_hosts =
+# recipient_unqualified_hosts =
+#
+# to control sender and recipient addresses, respectively. When this is done,
+# unqualified addresses are qualified using the settings of qualify_domain
+# and/or qualify_recipient (see above).
+
+
+# Unless you run a high-volume site you probably want more logging
+# detail than the default.  Adjust to suit.
+
+log_selector = +smtp_protocol_error +smtp_syntax_error \
+        +tls_certificate_verified
+
+
+# If you want Exim to support the "percent hack" for certain domains,
+# uncomment the following line and provide a list of domains. The "percent
+# hack" is the feature by which mail addressed to x%y@z (where z is one of
+# the domains listed) is locally rerouted to x@y and sent on. If z is not one
+# of the "percent hack" domains, x%y is treated as an ordinary local part. This
+# hack is rarely needed nowadays; you should not enable it unless you are sure
+# that you really need it.
+#
+# percent_hack_domains =
+#
+# As well as setting this option you will also need to remove the test
+# for local parts containing % in the ACL definition below.
+
+
+# When Exim can neither deliver a message nor return it to sender, it "freezes"
+# the delivery error message (aka "bounce message"). There are also other
+# circumstances in which messages get frozen. They will stay on the queue for
+# ever unless one of the following options is set.
+
+# This option unfreezes frozen bounce messages after two days, tries
+# once more to deliver them, and ignores any delivery failures.
+
+ignore_bounce_errors_after = 2d
+
+# This option cancels (removes) frozen messages that are older than a week.
+
+timeout_frozen_after = 7d
+
+
+# By default, messages that are waiting on Exim's queue are all held in a
+# single directory called "input" which is itself within Exim's spool
+# directory. (The default spool directory is specified when Exim is built, and
+# is often /var/spool/exim/.) Exim works best when its queue is kept short, but
+# there are circumstances where this is not always possible. If you uncomment
+# the setting below, messages on the queue are held in 62 subdirectories of
+# "input" instead of all in the same directory. The subdirectories are called
+# 0, 1, ... A, B, ... a, b, ... z. This has two benefits: (1) If your file
+# system degrades with many files in one directory, this is less likely to
+# happen; (2) Exim can process the queue one subdirectory at a time instead of
+# all at once, which can give better performance with large queues.
+
+# split_spool_directory = true
+
+
+# If you're in a part of the world where ASCII is not sufficient for most
+# text, then you're probably familiar with RFC2047 message header extensions.
+# By default, Exim adheres to the specification, including a limit of 76
+# characters to a line, with encoded words fitting within a line.
+# If you wish to use decoded headers in message filters in such a way
+# that successful decoding of malformed messages matters, you may wish to
+# configure Exim to be more lenient.
+#
+# check_rfc2047_length = false
+#
+# In particular, the Exim maintainers have had multiple reports of problems
+# from Russian administrators of issues until they disable this check,
+# because of some popular, yet buggy, mail composition software.
+
+
+# If you wish to be strictly RFC compliant, or if you know you'll be
+# exchanging email with systems that are not 8-bit clean, then you may
+# wish to disable advertising 8BITMIME.  Uncomment this option to do so.
+
+# accept_8bitmime = false
+
+
+# Exim does not make use of environment variables itself. However,
+# libraries that Exim uses (e.g. LDAP) depend on specific environment settings.
+# There are two lists: keep_environment for the variables we trust, and
+# add_environment for variables we want to set to a specific value.
+# Note that TZ is handled separately by the timezone runtime option
+# and TIMEZONE_DEFAULT buildtime option.
+
+# keep_environment = ^LDAP
+# add_environment = PATH=/usr/bin::/bin
+
+
+
+######################################################################
+#                       ACL CONFIGURATION                            #
+#         Specifies access control lists for incoming SMTP mail      #
+######################################################################
+
+begin acl
+
+# This access control list is used for every RCPT command in an incoming
+# SMTP message. The tests are run in order until the address is either
+# accepted or denied.
+
+acl_check_rcpt:
+
+  # Accept if the source is local SMTP (i.e. not over TCP/IP). We do this by
+  # testing for an empty sending host field.
+
+  accept  hosts = :
+          control = dkim_disable_verify
+
+  #############################################################################
+  # The following section of the ACL is concerned with local parts that contain
+  # @ or % or ! or / or | or dots in unusual places.
+  #
+  # The characters other than dots are rarely found in genuine local parts, but
+  # are often tried by people looking to circumvent relaying restrictions.
+  # Therefore, although they are valid in local parts, these rules lock them
+  # out, as a precaution.
+  #
+  # Empty components (two dots in a row) are not valid in RFC 2822, but Exim
+  # allows them because they have been encountered. (Consider local parts
+  # constructed as "firstinitial.secondinitial.familyname" when applied to
+  # someone like me, who has no second initial.) However, a local part starting
+  # with a dot or containing /../ can cause trouble if it is used as part of a
+  # file name (e.g. for a mailing list). This is also true for local parts that
+  # contain slashes. A pipe symbol can also be troublesome if the local part is
+  # incorporated unthinkingly into a shell command line.
+  #
+  # Two different rules are used. The first one is stricter, and is applied to
+  # messages that are addressed to one of the local domains handled by this
+  # host. The line "domains = +local_domains" restricts it to domains that are
+  # defined by the "domainlist local_domains" setting above. The rule  blocks
+  # local parts that begin with a dot or contain @ % ! / or |. If you have
+  # local accounts that include these characters, you will have to modify this
+  # rule.
+
+  deny    message       = Restricted characters in address
+          domains       = +local_domains
+          local_parts   = ^[.] : ^.*[@%!/|]
+
+  # The second rule applies to all other domains, and is less strict. The line
+  # "domains = !+local_domains" restricts it to domains that are NOT defined by
+  # the "domainlist local_domains" setting above. The exclamation mark is a
+  # negating operator. This rule allows your own users to send outgoing
+  # messages to sites that use slashes and vertical bars in their local parts.
+  # It blocks local parts that begin with a dot, slash, or vertical bar, but
+  # allows these characters within the local part. However, the sequence /../
+  # is barred. The use of @ % and ! is blocked, as before. The motivation here
+  # is to prevent your users (or your users' viruses) from mounting certain
+  # kinds of attack on remote sites.
+
+  deny    message       = Restricted characters in address
+          domains       = !+local_domains
+          local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
+  #############################################################################
+
+  # Accept mail to postmaster in any local domain, regardless of the source,
+  # and without verifying the sender.
+
+  accept  local_parts   = postmaster
+          domains       = +local_domains
+
+  # Deny unless the sender address can be verified.
+
+  require verify        = sender
+
+  # Reject all RCPT commands after too many bad recipients
+  # This is partly a defense against spam abuse and partly attacker abuse.
+  # Real senders should manage, by the time they get to 10 RCPT directives,
+  # to have had at least half of them be real addresses.
+  #
+  # This is a lightweight check and can protect you against repeated
+  # invocations of more heavy-weight checks which would come after it.
+
+  deny    condition     = ${if and {\
+                        {>{$rcpt_count}{10}}\
+                        {<{$recipients_count}{${eval:$rcpt_count/2}}} }}
+          message       = Rejected for too many bad recipients
+          logwrite      = REJECT [$sender_host_address]: bad recipient count high [${eval:$rcpt_count-$recipients_count}]
+
+  # Accept if the message comes from one of the hosts for which we are an
+  # outgoing relay. It is assumed that such hosts are most likely to be MUAs,
+  # so we set control=submission to make Exim treat the message as a
+  # submission. It will fix up various errors in the message, for example, the
+  # lack of a Date: header line. If you are actually relaying out out from
+  # MTAs, you may want to disable this. If you are handling both relaying from
+  # MTAs and submissions from MUAs you should probably split them into two
+  # lists, and handle them differently.
+
+  # Recipient verification is omitted here, because in many cases the clients
+  # are dumb MUAs that don't cope well with SMTP error responses. If you are
+  # actually relaying out from MTAs, you should probably add recipient
+  # verification here.
+
+  # Note that, by putting this test before any DNS black list checks, you will
+  # always accept from these hosts, even if they end up on a black list. The
+  # assumption is that they are your friends, and if they get onto a black
+  # list, it is a mistake.
+
+  accept  hosts         = +relay_from_hosts
+          control       = submission
+          control       = dkim_disable_verify
+
+  # Accept if the message arrived over an authenticated connection, from
+  # any host. Again, these messages are usually from MUAs, so recipient
+  # verification is omitted, and submission mode is set. And again, we do this
+  # check before any black list tests.
+
+  accept  authenticated = *
+          control       = submission
+          control       = dkim_disable_verify
+
+  # Insist that any other recipient address that we accept is either in one of
+  # our local domains, or is in a domain for which we explicitly allow
+  # relaying. Any other domain is rejected as being unacceptable for relaying.
+
+  require message = relay not permitted
+          domains = +local_domains : +relay_to_domains
+
+  # We also require all accepted addresses to be verifiable. This check will
+  # do local part verification for local domains, but only check the domain
+  # for remote domains. The only way to check local parts for the remote
+  # relay domains is to use a callout (add /callout), but please read the
+  # documentation about callouts before doing this.
+
+  require verify = recipient
+
+  #############################################################################
+  # There are no default checks on DNS black lists because the domains that
+  # contain these lists are changing all the time. However, here are two
+  # examples of how you can get Exim to perform a DNS black list lookup at this
+  # point. The first one denies, whereas the second just warns.
+  #
+  # deny    dnslists      = black.list.example
+  #         message       = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text
+  #
+  # warn    dnslists      = black.list.example
+  #         add_header    = X-Warning: $sender_host_address is in a black list at $dnslist_domain
+  #         log_message   = found in $dnslist_domain
+  #############################################################################
+
+  #############################################################################
+  # This check is commented out because it is recognized that not every
+  # sysadmin will want to do it. If you enable it, the check performs
+  # Client SMTP Authorization (csa) checks on the sending host. These checks
+  # do DNS lookups for SRV records. The CSA proposal is currently (May 2005)
+  # an Internet draft. You can, of course, add additional conditions to this
+  # ACL statement to restrict the CSA checks to certain hosts only.
+  #
+  # require verify = csa
+  #############################################################################
+
+  #############################################################################
+  # If doing per-user content filtering then recipients with filters different
+  # to the first recipient must be deferred unless the sender talks PRDR.
+  #
+  # defer  !condition     = $prdr_requested
+  #        condition      = ${if > {0}{$recipients_count}}
+  #        condition      = ${if !eq {$acl_m_content_filter} \
+  #                                  {${lookup PER_RCPT_CONTENT_FILTER}}}
+  # warn   !condition     = $prdr_requested
+  #        condition      = ${if > {0}{$recipients_count}}
+  #        set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER}
+  #############################################################################
+
+  # At this point, the address has passed all the checks that have been
+  # configured, so we accept it unconditionally.
+
+  accept
+
+
+# This ACL is used once per recipient, for multi-recipient messages, if
+# we advertised PRDR.  It can be used to perform receipient-dependent
+# header- and body- based filtering and rejections.
+# We set a variable to record that PRDR was active used, so that checking
+# in the data ACL can be skipped.
+
+.ifdef _HAVE_PRDR
+acl_check_prdr:
+  warn  set acl_m_did_prdr = y
+
+  #############################################################################
+  # do lookup on filtering, with $local_part@$domain, deny on filter match
+  #
+  # deny      set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER}
+  #           condition    = ...
+  #############################################################################
+
+  accept
+.endif
+
+# This ACL is used after the contents of a message have been received. This
+# is the ACL in which you can test a message's headers or body, and in
+# particular, this is where you can invoke external virus or spam scanners.
+# Some suggested ways of configuring these tests are shown below, commented
+# out. Without any tests, this ACL accepts all messages. If you want to use
+# such tests, you must ensure that Exim is compiled with the content-scanning
+# extension (WITH_CONTENT_SCAN=yes in Local/Makefile).
+
+acl_check_data:
+
+  # Deny if the message contains an overlong line.  Per the standards
+  # we should never receive one such via SMTP.
+  #
+  deny    condition  = ${if > {$max_received_linelength}{998}}
+          message    = maximum allowed line length is 998 octets, \
+                       got $max_received_linelength
+
+  # Deny if the headers contain badly-formed addresses.
+  #
+  deny    !verify =     header_syntax
+          message =     header syntax
+          log_message = header syntax ($acl_verify_message)
+
+  # Deny if the message contains a virus. Before enabling this check, you
+  # must install a virus scanner and set the av_scanner option above.
+  #
+  # deny    malware    = *
+  #         message    = This message contains a virus ($malware_name).
+
+  # Add headers to a message if it is judged to be spam. Before enabling this,
+  # you must install SpamAssassin. You may also need to set the spamd_address
+  # option above.
+  #
+  # warn    spam       = nobody
+  #         add_header = X-Spam_score: $spam_score\n\
+  #                      X-Spam_score_int: $spam_score_int\n\
+  #                      X-Spam_bar: $spam_bar\n\
+  #                      X-Spam_report: $spam_report
+
+  #############################################################################
+  # No more tests if PRDR was actively used.
+  # accept   condition  = ${if def:acl_m_did_prdr}
+  #
+  # To get here, all message recipients must have identical per-user
+  # content filtering (enforced by RCPT ACL).  Do lookup for filter
+  # and deny on match.
+  #
+  # deny      set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER}
+  #           condition    = ...
+  #############################################################################
+
+
+  # Accept the message.
+
+  accept
+
+
+
+######################################################################
+#                      ROUTERS CONFIGURATION                         #
+#               Specifies how addresses are handled                  #
+######################################################################
+#     THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT!       #
+# An address is passed to each router in turn until it is accepted.  #
+######################################################################
+
+begin routers
+
+# This router routes to remote hosts over SMTP by explicit IP address,
+# when an email address is given in "domain literal" form, for example,
+# <user@[192.168.35.64]>. The RFCs require this facility. However, it is
+# little-known these days, and has been exploited by evil people seeking
+# to abuse SMTP relays. Consequently it is commented out in the default
+# configuration. If you uncomment this router, you also need to uncomment
+# allow_domain_literals above, so that Exim can recognize the syntax of
+# domain literal addresses.
+
+# domain_literal:
+#   driver = ipliteral
+#   domains = ! +local_domains
+#   transport = remote_smtp
+
+
+# This router can be used when you want to send all mail to a
+# server which handles DNS lookups for you; an ISP will typically run such
+# a server for their customers.  The hostname in route_data comes from the
+# macro defined at the top of the file.  If not defined, then we'll use the
+# dnslookup router below instead.
+# Beware that the hostname is specified again in the Transport.
+
+.ifdef ROUTER_SMARTHOST
+
+smarthost:
+  driver = manualroute
+  domains = ! +local_domains
+  transport = smarthost_smtp
+  route_data = ROUTER_SMARTHOST
+  ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1
+  no_more
+
+.else
+
+# This router routes addresses that are not in local domains by doing a DNS
+# lookup on the domain name. The exclamation mark that appears in "domains = !
+# +local_domains" is a negating operator, that is, it can be read as "not". The
+# recipient's domain must not be one of those defined by "domainlist
+# local_domains" above for this router to be used.
+#
+# If the router is used, any domain that resolves to 0.0.0.0 or to a loopback
+# interface address (127.0.0.0/8) is treated as if it had no DNS entry. Note
+# that 0.0.0.0 is the same as 0.0.0.0/32, which is commonly treated as the
+# local host inside the network stack. It is not 0.0.0.0/0, the default route.
+# If the DNS lookup fails, no further routers are tried because of the no_more
+# setting, and consequently the address is unrouteable.
+
+dnslookup:
+  driver = dnslookup
+  domains = ! +local_domains
+  transport = remote_smtp
+  ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
+# if ipv6-enabled then instead use:
+# ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1
+  no_more
+
+# This closes the ROUTER_SMARTHOST ifdef around the choice of routing for
+# off-site mail.
+.endif
+
+
+# The remaining routers handle addresses in the local domain(s), that is those
+# domains that are defined by "domainlist local_domains" above.
+
+
+# This router handles aliasing using a linearly searched alias file with the
+# name SYSTEM_ALIASES_FILE. When this configuration is installed automatically,
+# the name gets inserted into this file from whatever is set in Exim's
+# build-time configuration. The default path is the traditional /etc/aliases.
+# If you install this configuration by hand, you need to specify the correct
+# path in the "data" setting below.
+#
+##### NB  You must ensure that the alias file exists. It used to be the case
+##### NB  that every Unix had that file, because it was the Sendmail default.
+##### NB  These days, there are systems that don't have it. Your aliases
+##### NB  file should at least contain an alias for "postmaster".
+#
+# If any of your aliases expand to pipes or files, you will need to set
+# up a user and a group for these deliveries to run under. You can do
+# this by uncommenting the "user" option below (changing the user name
+# as appropriate) and adding a "group" option if necessary. Alternatively, you
+# can specify "user" on the transports that are used. Note that the transports
+# listed below are the same as are used for .forward files; you might want
+# to set up different ones for pipe and file deliveries from aliases.
+
+system_aliases:
+  driver = redirect
+  allow_fail
+  allow_defer
+  data = ${lookup{$local_part}lsearch{SYSTEM_ALIASES_FILE}}
+# user = exim
+  file_transport = address_file
+  pipe_transport = address_pipe
+
+
+# This router handles forwarding using traditional .forward files in users'
+# home directories. If you want it also to allow mail filtering when a forward
+# file starts with the string "# Exim filter" or "# Sieve filter", uncomment
+# the "allow_filter" option.
+
+# The no_verify setting means that this router is skipped when Exim is
+# verifying addresses. Similarly, no_expn means that this router is skipped if
+# Exim is processing an EXPN command.
+
+# If you want this router to treat local parts with suffixes introduced by "-"
+# or "+" characters as if the suffixes did not exist, uncomment the two local_
+# part_suffix options. Then, for example, xxxx-foo@your.domain will be treated
+# in the same way as xxxx@your.domain by this router. Because this router is
+# not used for verification, if you choose to uncomment those options, then you
+# will *need* to make the same change to the localuser router.  (There are
+# other approaches, if this is undesirable, but they add complexity).
+
+# The check_ancestor option means that if the forward file generates an
+# address that is an ancestor of the current one, the current one gets
+# passed on instead. This covers the case where A is aliased to B and B
+# has a .forward file pointing to A.
+
+# The three transports specified at the end are those that are used when
+# forwarding generates a direct delivery to a file, or to a pipe, or sets
+# up an auto-reply, respectively.
+
+userforward:
+  driver = redirect
+  check_local_user
+# local_part_suffix = +* : -*
+# local_part_suffix_optional
+  file = $home/.forward
+# allow_filter
+  no_verify
+  no_expn
+  check_ancestor
+  file_transport = address_file
+  pipe_transport = address_pipe
+  reply_transport = address_reply
+
+
+# This router matches local user mailboxes. If the router fails, the error
+# message is "Unknown user".
+
+# If you want this router to treat local parts with suffixes introduced by "-"
+# or "+" characters as if the suffixes did not exist, uncomment the two local_
+# part_suffix options. Then, for example, xxxx-foo@your.domain will be treated
+# in the same way as xxxx@your.domain by this router.
+
+localuser:
+  driver = accept
+  check_local_user
+# local_part_suffix = +* : -*
+# local_part_suffix_optional
+  transport = local_delivery
+  cannot_route_message = Unknown user
+
+
+
+######################################################################
+#                      TRANSPORTS CONFIGURATION                      #
+######################################################################
+#                       ORDER DOES NOT MATTER                        #
+#     Only one appropriate transport is called for each delivery.    #
+######################################################################
+
+# A transport is used only when referenced from a router that successfully
+# handles an address.
+
+begin transports
+
+
+# This transport is used for delivering messages over SMTP connections.
+
+remote_smtp:
+  driver = smtp
+.ifdef _HAVE_TLS_RESUME
+  tls_resumption_hosts = *
+.endif
+
+
+# This transport is used for delivering messages to a smarthost, if the
+# smarthost router is enabled.  This starts from the same basis as
+# "remote_smtp" but then turns on various security options, because
+# we assume that if you're told "use smarthost.example.org as the smarthost"
+# then there will be TLS available, with a verifiable certificate for that
+# hostname, using decent TLS.
+
+smarthost_smtp:
+  driver = smtp
+  multi_domain
+  #
+.ifdef _HAVE_TLS
+  # Comment out any of these which you have to, then file a Support
+  # request with your smarthost provider to get things fixed:
+  hosts_require_tls = *
+  tls_verify_hosts = *
+  # As long as tls_verify_hosts is enabled, this this will have no effect,
+  # but if you have to comment it out then this will at least log whether
+  # you succeed or not:
+  tls_try_verify_hosts = *
+  #
+  # The SNI name should match the name which we'll expect to verify;
+  # many mail systems don't use SNI and this doesn't matter, but if it does,
+  # we need to send a name which the remote site will recognize.
+  # This _should_ be the name which the smarthost operators specified as
+  # the hostname for sending your mail to.
+  tls_sni = ROUTER_SMARTHOST
+  #
+.ifdef _HAVE_OPENSSL
+  tls_require_ciphers = HIGH:!aNULL:@STRENGTH
+.endif
+.ifdef _HAVE_GNUTLS
+  tls_require_ciphers = SECURE192:-VERS-SSL3.0:-VERS-TLS1.0:-VERS-TLS1.1
+.endif
+.ifdef _HAVE_TLS_RESUME
+  tls_resumption_hosts = *
+.endif
+.endif
+
+
+# This transport is used for local delivery to user mailboxes in traditional
+# BSD mailbox format. By default it will be run under the uid and gid of the
+# local user, and requires the sticky bit to be set on the /var/mail directory.
+# Some systems use the alternative approach of running mail deliveries under a
+# particular group instead of using the sticky bit. The commented options below
+# show how this can be done.
+
+local_delivery:
+  driver = appendfile
+  file = /var/mail/$local_part_data
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+# group = mail
+# mode = 0660
+
+
+# This transport is used for handling pipe deliveries generated by alias or
+# .forward files. If the pipe generates any standard output, it is returned
+# to the sender of the message as a delivery error. Set return_fail_output
+# instead of return_output if you want this to happen only when the pipe fails
+# to complete normally. You can set different transports for aliases and
+# forwards if you want to - see the references to address_pipe in the routers
+# section above.
+
+address_pipe:
+  driver = pipe
+  return_output
+
+
+# This transport is used for handling deliveries directly to files that are
+# generated by aliasing or forwarding.
+
+address_file:
+  driver = appendfile
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+
+
+# This transport is used for handling autoreplies generated by the filtering
+# option of the userforward router.
+
+address_reply:
+  driver = autoreply
+
+
+
+######################################################################
+#                      RETRY CONFIGURATION                           #
+######################################################################
+
+begin retry
+
+# This single retry rule applies to all domains and all errors. It specifies
+# retries every 15 minutes for 2 hours, then increasing retry intervals,
+# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
+# hours, then retries every 6 hours until 4 days have passed since the first
+# failed delivery.
+
+# WARNING: If you do not have any retry rules at all (this section of the
+# configuration is non-existent or empty), Exim will not do any retries of
+# messages that fail to get delivered at the first attempt. The effect will
+# be to treat temporary errors as permanent. Therefore, DO NOT remove this
+# retry rule unless you really don't want any retries.
+
+# Address or Domain    Error       Retries
+# -----------------    -----       -------
+
+*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h
+
+
+
+######################################################################
+#                      REWRITE CONFIGURATION                         #
+######################################################################
+
+# There are no rewriting specifications in this default configuration file.
+
+begin rewrite
+
+
+
+######################################################################
+#                   AUTHENTICATION CONFIGURATION                     #
+######################################################################
+
+# The following authenticators support plaintext username/password
+# authentication using the standard PLAIN mechanism and the traditional
+# but non-standard LOGIN mechanism, with Exim acting as the server.
+# PLAIN and LOGIN are enough to support most MUA software.
+#
+# These authenticators are not complete: you need to change the
+# server_condition settings to specify how passwords are verified.
+# They are set up to offer authentication to the client only if the
+# connection is encrypted with TLS, so you also need to add support
+# for TLS. See the global configuration options section at the start
+# of this file for more about TLS.
+#
+# The default RCPT ACL checks for successful authentication, and will accept
+# messages from authenticated users from anywhere on the Internet.
+
+begin authenticators
+
+# PLAIN authentication has no server prompts. The client sends its
+# credentials in one lump, containing an authorization ID (which we do not
+# use), an authentication ID, and a password. The latter two appear as
+# $auth2 and $auth3 in the configuration and should be checked against a
+# valid username and password. In a real configuration you would typically
+# use $auth2 as a lookup key, and compare $auth3 against the result of the
+# lookup, perhaps using the crypteq{}{} condition.
+
+#PLAIN:
+#  driver                     = plaintext
+#  server_set_id              = $auth2
+#  server_prompts             = :
+#  server_condition           = Authentication is not yet configured
+#  server_advertise_condition = ${if def:tls_in_cipher }
+
+# LOGIN authentication has traditional prompts and responses. There is no
+# authorization ID in this mechanism, so unlike PLAIN the username and
+# password are $auth1 and $auth2. Apart from that you can use the same
+# server_condition setting for both authenticators.
+
+#LOGIN:
+#  driver                     = plaintext
+#  server_set_id              = $auth1
+#  server_prompts             = <| Username: | Password:
+#  server_condition           = Authentication is not yet configured
+#  server_advertise_condition = ${if def:tls_in_cipher }
+
+
+######################################################################
+#                   CONFIGURATION FOR local_scan()                   #
+######################################################################
+
+# If you have built Exim to include a local_scan() function that contains
+# tables for private options, you can define those options here. Remember to
+# uncomment the "begin" line. It is commented by default because it provokes
+# an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS
+# set in the Local/Makefile.
+
+# begin local_scan
+
+
+# End of Exim configuration file