aboutsummaryrefslogtreecommitdiff
path: root/doc
ModeNameSize
-rw-r--r--contributing.texi14935logplainabout
-rw-r--r--emacs.texi28918logplainabout
-rw-r--r--environment-gdb.scm481logplainabout
-rw-r--r--fdl-1.3.texi23431logplainabout
-rw-r--r--guix.texi494405logplainabout
-rw-r--r--htmlxref.cnf20692logplainabout
d---------images336logplain
-rw-r--r--local.mk5276logplainabout
-rw-r--r--package-hello.scm615logplainabout
generated by cgit
P\n" "Atari systems using POKEY sound chip\n" "@item SPC\n" "Super Nintendo/Super Famicom\n" "@item VGM/VGZ\n" "Sega Master System/Mark III, Sega Genesis/Mega Drive, BBC Micro\n" "@end table" msgstr "" #: gnu/packages/audio.scm:445 msgid "Audio tracking library" msgstr "" #: gnu/packages/audio.scm:446 msgid "" "LibOpenMPT is a cross-platform C++ and C module playback\n" "library. It is based on the player code of the Open ModPlug Tracker project." msgstr "" #: gnu/packages/audio.scm:476 msgid "Open Fingerprint Architecture" msgstr "" #: gnu/packages/audio.scm:477 msgid "" "LibOFA is an audio fingerprint library, created and provided\n" "by MusicIP." msgstr "" #: gnu/packages/audio.scm:501 msgid "MIDI to WAVE converter library" msgstr "" #: gnu/packages/audio.scm:502 msgid "" "LibTiMidity is a MIDI to WAVE converter library that uses\n" "Gravis Ultrasound-compatible patch files to generate digital audio data from\n" "General MIDI files." msgstr "" #: gnu/packages/audio.scm:526 gnu/packages/audio.scm:545 msgid "Adaptive Multi Rate Codec" msgstr "" #: gnu/packages/audio.scm:527 msgid "" "VO-AMR is a library of VisualOn implementation of\n" "Adaptive Multi Rate Narrowband and Wideband (AMR-NB and AMR-WB) speech codec." msgstr "" #: gnu/packages/audio.scm:546 msgid "" "OpenCore-AMR is a library of OpenCORE Framework\n" "implementation of Adaptive Multi Rate Narrowband and Wideband\n" "(AMR-NB and AMR-WB) speech codec." msgstr "" #: gnu/packages/audio.scm:577 msgid "Realtime modular synthesizer and effect processor" msgstr "" #: gnu/packages/audio.scm:579 msgid "" "AlsaModularSynth is a digital implementation of a classical analog\n" "modular synthesizer system. It uses virtual control voltages to control the\n" "parameters of the modules. The control voltages which control the frequency\n" "e.g. of the VCO (Voltage Controlled Oscillator) and VCF (Voltage Controlled\n" "Filter) modules follow the convention of 1V / Octave." msgstr "" #: gnu/packages/audio.scm:617 msgid "Library for audio labelling" msgstr "" #: gnu/packages/audio.scm:619 msgid "" "aubio is a tool designed for the extraction of annotations from audio\n" "signals. Its features include segmenting a sound file before each of its\n" "attacks, performing pitch detection, tapping the beat and producing MIDI\n" "streams from live audio." msgstr "" #: gnu/packages/audio.scm:664 msgid "Audio processing program with an interactive mode" msgstr "" #: gnu/packages/audio.scm:666 msgid "dsp is an audio processing program with an interactive mode." msgstr "" #: gnu/packages/audio.scm:713 msgid "C++ library of functions for DSP and Music Informatics purposes" msgstr "" #: gnu/packages/audio.scm:715 msgid "" "QM-DSP is a C++ library of functions for DSP and Music Informatics\n" "purposes developed at Queen Mary, University of London." msgstr "" #: gnu/packages/audio.scm:849 msgid "Digital audio workstation" msgstr "" #: gnu/packages/audio.scm:851 msgid "" "Ardour is a multi-channel digital audio workstation, allowing users to\n" "record, edit, mix and master audio and MIDI projects. It is targeted at audio\n" "engineers, musicians, soundtrack editors and composers." msgstr "" #: gnu/packages/audio.scm:986 gnu/packages/audio.scm:1097 msgid "Software for recording and editing sounds" msgstr "" #: gnu/packages/audio.scm:988 msgid "" "Audacity is a multi-track audio editor designed for recording, playing\n" "and editing digital audio. It features digital effects and spectrum analysis\n" "tools." msgstr "" #: gnu/packages/audio.scm:1099 msgid "" "Tenacity is a multi-track audio editor designed for recording, playing\n" "and editing digital audio. It features digital effects and spectrum analysis\n" "tools." msgstr "" #: gnu/packages/audio.scm:1154 msgid "Library to handle various audio file formats" msgstr "" #: gnu/packages/audio.scm:1155 msgid "" "This is an open-source version of SGI's audiofile library.\n" "It provides a uniform programming interface for processing of audio data to\n" "and from audio files of many common formats.\n" "\n" "Currently supported file formats include AIFF/AIFF-C, WAVE, and NeXT/Sun\n" ".snd/.au, BICS, and raw data. Supported compression formats are currently\n" "G.711 mu-law and A-law." msgstr "" #: gnu/packages/audio.scm:1195 msgid "Pitch-correction LADSPA audio plugin" msgstr "" #: gnu/packages/audio.scm:1197 msgid "" "Autotalent is a LADSPA plugin for real-time pitch-correction. Among its\n" "controls are allowable notes, strength of correction, LFO for vibrato and\n" "formant warp." msgstr "" #: gnu/packages/audio.scm:1247 msgid "Tonewheel organ synthesizer" msgstr "" #: gnu/packages/audio.scm:1249 msgid "" "AZR-3 is a port of the free VST plugin AZR-3. It is a tonewheel organ\n" "with drawbars, distortion and rotating speakers. The organ has three\n" "sections, two polyphonic sections with nine drawbars each and one monophonic\n" "bass section with five drawbars. A standalone JACK application and LV2\n" "plugins are provided." msgstr "" #: gnu/packages/audio.scm:1285 msgid "Audio plug-in pack for LV2 and JACK environments" msgstr "" #: gnu/packages/audio.scm:1287 msgid "" "Calf Studio Gear is an audio plug-in pack for LV2 and JACK environments.\n" "The suite contains lots of effects (delay, modulation, signal processing,\n" "filters, equalizers, dynamics, distortion and mastering effects),\n" "instruments (SF2 player, organ simulator and a monophonic synthesizer) and\n" "tools (analyzer, mono/stereo tools, crossovers)." msgstr "" #: gnu/packages/audio.scm:1327 msgid "LV2 port of the CAPS audio plugin collection" msgstr "" #: gnu/packages/audio.scm:1329 msgid "" "LV2 port of CAPS, a collection of audio plugins comprising basic virtual\n" "guitar amplification and a small range of classic effects, signal processors and\n" "generators of mostly elementary and occasionally exotic nature." msgstr "" #: gnu/packages/audio.scm:1358 msgid "Real-time C++ @acronym{IIR, infinite impulse response} filter library" msgstr "" #: gnu/packages/audio.scm:1360 msgid "" "This C++ library implements the Butterworth, RBJ, and Chebychev\n" "@acronym{IIR, infinite impulse response} filters. Samples are processed one by\n" "one, in real time. It can easily import coefficients generated with Python\n" "(@code{scipy}). It also avoids memory leaks by allocating memory at compile\n" "time, using templates, instead of calling @code{malloc()} or @code{new}." msgstr "" #: gnu/packages/audio.scm:1401 msgid "LV2 plugins for live use" msgstr "" #: gnu/packages/audio.scm:1403 msgid "" "The infamous plugins are a collection of LV2 audio plugins for live\n" "performances. The plugins include a cellular automaton synthesizer, an\n" "envelope follower, distortion effects, tape effects and more." msgstr "" #: gnu/packages/audio.scm:1436 msgid "Synchronous multiroom audio player" msgstr "" #: gnu/packages/audio.scm:1438 msgid "" "Snapcast is a multi-room client-server audio player. Clients are time\n" "synchronized with the server to play synced audio." msgstr "" #: gnu/packages/audio.scm:1467 msgid "The SWH Plugins package for the LADSPA plugin system" msgstr "" #: gnu/packages/audio.scm:1468 msgid "This package provides Steve Harris's LADSPA plugins." msgstr "" #: gnu/packages/audio.scm:1506 msgid "SWH plugins in LV2 format" msgstr "" #: gnu/packages/audio.scm:1508 msgid "" "Swh-plugins-lv2 is a collection of audio plugins in LV2 format. Plugin\n" "classes include: dynamics (compressor, limiter), time (delay, chorus,\n" "flanger), ringmodulator, distortion, filters, pitchshift, oscillators,\n" "emulation (valve, tape), bit fiddling (decimator, pointer-cast), etc." msgstr "" #: gnu/packages/audio.scm:1540 msgid "C++ library for access to DJ record libraries" msgstr "" #: gnu/packages/audio.scm:1542 msgid "" "@code{libdjinterop} is a C++ library that allows access to database\n" "formats used to store information about DJ record libraries." msgstr "" #: gnu/packages/audio.scm:1603 msgid "Sound Synthesis with Physical Models" msgstr "" #: gnu/packages/audio.scm:1604 gnu/packages/audio.scm:1635 msgid "" "Tao is a software package for sound synthesis using physical\n" "models. It provides a virtual acoustic material constructed from masses and\n" "springs which can be used as the basis for building quite complex virtual\n" "musical instruments. Tao comes with a synthesis language for creating and\n" "playing instruments and a C++ API for those who would like to use it as an\n" "object library." msgstr "" #: gnu/packages/audio.scm:1634 msgid "Sound synthesis with physical models" msgstr "" #: gnu/packages/audio.scm:1668 msgid "Sound and music computing system" msgstr "" #: gnu/packages/audio.scm:1670 msgid "" "Csound is a user-programmable and user-extensible sound processing\n" "language and software synthesizer." msgstr "" #: gnu/packages/audio.scm:1695 msgid "Convert SMF MIDI files to and from plain text" msgstr "" #: gnu/packages/audio.scm:1697 msgid "" "midicomp can manipulate SMF (Standard MIDI File) files. It can both\n" " read and write SMF files in 0 or format 1 and also read and write its own\n" " plain text format. This means a SMF file can be turned into easily\n" " parseable text, edited with any text editor or filtered through any script\n" " language, and recompiled back into a binary SMF file." msgstr "" #: gnu/packages/audio.scm:1742 gnu/packages/audio.scm:4497 msgid "C++ wrapper around the ALSA API" msgstr "" #: gnu/packages/audio.scm:1744 msgid "" "clalsadrv is a C++ wrapper around the ALSA API simplifying access to\n" "ALSA PCM devices." msgstr "" #: gnu/packages/audio.scm:1781 msgid "LADSPA ambisonics plugins" msgstr "" #: gnu/packages/audio.scm:1783 msgid "" "The AMB plugins are a set of LADSPA ambisonics plugins, mainly to be\n" "used within Ardour. Features include: mono and stereo to B-format panning,\n" "horizontal rotator, square, hexagon and cube decoders." msgstr "" #: gnu/packages/audio.scm:1818 msgid "Chorus, phaser, and vintage high-pass and low-pass filters" msgstr "" #: gnu/packages/audio.scm:1820 msgid "" "This package provides various LADSPA plugins. @code{cs_chorus} and\n" "@code{cs_phaser} provide chorus and phaser effects, respectively;\n" "@code{mvclpf24} provides four implementations of the low-pass filter used in\n" "vintage Moog synthesizers; @code{mvchpf24} is based on the voltage-controlled\n" "high-pass filter by Robert Moog. The filters attempt to accurately emulate\n" "the non-linear circuit elements of their original analog counterparts." msgstr "" #: gnu/packages/audio.scm:1858 msgid "LADSPA reverb plugin" msgstr "" #: gnu/packages/audio.scm:1860 msgid "" "This package provides a stereo reverb LADSPA plugin based on the\n" "well-known greverb." msgstr "" #: gnu/packages/audio.scm:1894 msgid "LADSPA four-band parametric equalizer plugin" msgstr "" #: gnu/packages/audio.scm:1896 msgid "" "This package provides a LADSPA plugin for a four-band parametric\n" "equalizer. Each section has an active/bypass switch, frequency, bandwidth and\n" "gain controls. There is also a global bypass switch and gain control.\n" "\n" "The 2nd order resonant filters are implemented using a Mitra-Regalia style\n" "lattice filter, which is stable even while parameters are being changed.\n" "\n" "All switches and controls are internally smoothed, so they can be used @code{live}\n" "without any clicks or zipper noises. This makes this plugin suitable for use\n" "in systems that allow automation of plugin control ports, such as Ardour, or\n" "for stage use." msgstr "" #: gnu/packages/audio.scm:1939 msgid "LADSPA stereo width plugin" msgstr "" #: gnu/packages/audio.scm:1941 msgid "" "This package provides a LADSPA plugin to manipulate the stereo width of\n" "audio signals." msgstr "" #: gnu/packages/audio.scm:1976 msgid "LADSPA plugin for synthesizer oscillators" msgstr "" #: gnu/packages/audio.scm:1978 msgid "" "The @code{blvco} LADSPA plugin provides three anti-aliased oscillators:\n" "\n" "@enumerate\n" "@item Pulse-VCO, a dirac pulse oscillator with flat amplitude spectrum\n" "@item Saw-VCO, a sawtooth oscillator with 1/F amplitude spectrum\n" "@item Rec-VCO, a square / rectangle oscillator\n" "@end enumerate\n" "\n" "\n" "All oscillators are low-pass filtered to provide waveforms similar to the\n" "output of analog synthesizers such as the Moog Voyager." msgstr "" #: gnu/packages/audio.scm:2020 msgid "LADSPA Autowah effect plugin" msgstr "" #: gnu/packages/audio.scm:2022 msgid "" "This package provides a LADSPA plugin for a Wah effect with envelope\n" "follower." msgstr "" #: gnu/packages/audio.scm:2056 msgid "LADSPA stereo reverb plugin" msgstr "" #: gnu/packages/audio.scm:2058 msgid "This package provides a LADSPA plugin for a stereo reverb effect." msgstr "" #: gnu/packages/audio.scm:2098 msgid "SoundFont synthesizer" msgstr "" #: gnu/packages/audio.scm:2100 msgid "" "FluidSynth is a real-time software synthesizer based on the SoundFont 2\n" "specifications. FluidSynth reads and handles MIDI events from the MIDI input\n" "device. It is the software analogue of a MIDI synthesizer. FluidSynth can\n" "also play midifiles using a Soundfont." msgstr "" #: gnu/packages/audio.scm:2121 msgid "MPEG-4 and MPEG-2 AAC decoder" msgstr "" #: gnu/packages/audio.scm:2123 msgid "FAAD2 is an MPEG-4 and MPEG-2 AAC decoder supporting LC, Main, LTP, SBR, -PS, and DAB+." msgstr "" #: gnu/packages/audio.scm:2162 msgid "Signal processing language" msgstr "" #: gnu/packages/audio.scm:2164 msgid "Faust is a programming language for realtime audio signal processing." msgstr "" #: gnu/packages/audio.scm:2274 msgid "GUS compatible patches for MIDI players" msgstr "" #: gnu/packages/audio.scm:2276 msgid "" "FreePats is a project to create a free and open set of GUS compatible\n" "patches that can be used with softsynths such as Timidity and WildMidi." msgstr "" #: gnu/packages/audio.scm:2318 msgid "General MIDI sound set" msgstr "" #: gnu/packages/audio.scm:2319 msgid "" "FreePats is a project to create a free (as in free software)\n" "collection of digital instruments for music production. This sound bank is a\n" "partial release of the General MIDI sound set." msgstr "" #: gnu/packages/audio.scm:2373 msgid "Virtual guitar amplifier" msgstr "" #: gnu/packages/audio.scm:2374 msgid "" "Guitarix is a virtual guitar amplifier running JACK.\n" "Guitarix takes the signal from your guitar as a mono-signal from your sound\n" "card. The input is processed by a main amp and a rack-section. Both can be\n" "routed separately and deliver a processed stereo-signal via JACK. You may\n" "fill the rack with effects from more than 25 built-in modules including stuff\n" "from a simple noise gate to modulation effects like flanger, phaser or\n" "auto-wah." msgstr "" #: gnu/packages/audio.scm:2428 msgid "Audio effects processor" msgstr "" #: gnu/packages/audio.scm:2430 msgid "" "Rakarrack is a richly featured multi-effects processor emulating a\n" "guitar effects pedalboard. Effects include compressor, expander, noise gate,\n" "equalizers, exciter, flangers, chorus, various delay and reverb effects,\n" "distortion modules and many more. Most of the effects engine is built from\n" "modules found in the excellent software synthesizer ZynAddSubFX. Presets and\n" "user interface are optimized for guitar, but Rakarrack processes signals in\n" "stereo while it does not apply internal band-limiting filtering, and thus is\n" "well suited to all musical instruments and vocals." msgstr "" #: gnu/packages/audio.scm:2484 msgid "LV2 convolution reverb" msgstr "" #: gnu/packages/audio.scm:2486 msgid "" "IR is a low-latency, real-time, high performance signal convolver\n" "especially for creating reverb effects. It supports impulse responses with 1,\n" "2 or 4 channels, in any soundfile format supported by libsndfile." msgstr "" #: gnu/packages/audio.scm:2526 msgid "JACK audio connection kit" msgstr "" #: gnu/packages/audio.scm:2528 msgid "" "JACK is a low-latency audio server. It can connect a number of\n" "different applications to an audio device, as well as allowing them to share\n" "audio between themselves. JACK is different from other audio server efforts\n" "in that it has been designed from the ground up to be suitable for\n" "professional audio work. This means that it focuses on two key areas:\n" "synchronous execution of all clients, and low latency operation." msgstr "" #: gnu/packages/audio.scm:2614 msgid "Tools for JACK connections" msgstr "" #: gnu/packages/audio.scm:2615 msgid "" "This package provides tools for managing JACK connections\n" "and testing or configuring the JACK session. Tools include @code{jack_lsp},\n" "@code{jack_connect}, and @code{jack_transport}." msgstr "" #: gnu/packages/audio.scm:2656 msgid "Multi-machine audio system for network music performance" msgstr "" #: gnu/packages/audio.scm:2658 msgid "" "JackTrip is a multi-machine audio system used for network music\n" "performance over the Internet. It supports any number of channels (as many as\n" "the computer/network can handle) of bidirectional, high quality, uncompressed\n" "audio signal streaming." msgstr "" #: gnu/packages/audio.scm:2697 msgid "Simple LV2 host for JACK" msgstr "" #: gnu/packages/audio.scm:2699 msgid "" "Jalv is a simple but fully featured LV2 host for JACK. It runs LV2\n" "plugins and exposes their ports as JACK ports, essentially making any LV2\n" "plugin function as a JACK application." msgstr "" #: gnu/packages/audio.scm:2743 msgid "Linux Audio Developer's Simple Plugin API (LADSPA)" msgstr "" #: gnu/packages/audio.scm:2745 msgid "" "LADSPA is a standard that allows software audio processors and effects\n" "to be plugged into a wide range of audio synthesis and recording packages." msgstr "" #: gnu/packages/audio.scm:2795 msgid "Audio application session manager" msgstr "" #: gnu/packages/audio.scm:2797 msgid "" "LASH is a session management system for audio applications. It allows\n" "you to save and restore audio sessions consisting of multiple interconneced\n" "applications, restoring program state (i.e. loaded patches) and the\n" "connections between them." msgstr "" #: gnu/packages/audio.scm:2818 msgid "Bauer stereophonic-to-binaural DSP" msgstr "" #: gnu/packages/audio.scm:2820 msgid "" "The Bauer stereophonic-to-binaural DSP (bs2b) library and plugins is\n" "designed to improve headphone listening of stereo audio records. Recommended\n" "for headphone prolonged listening to disable superstereo fatigue without\n" "essential distortions." msgstr "" #: gnu/packages/audio.scm:2842 msgid "Bauer stereophonic-to-binaural DSP - LADSPA plugin" msgstr "" #: gnu/packages/audio.scm:2843 msgid "" "The Bauer stereophonic-to-binaural DSP (bs2b) library and\n" "plugins is designed to improve headphone listening of stereo audio records.\n" "Recommended for headphone prolonged listening to disable superstereo fatigue\n" "without essential distortions. This package contains a LADSPA plugin for use\n" "with applications that support them (e.g. PulseAudio)." msgstr "" #: gnu/packages/audio.scm:2867 msgid "Implementation of the Open Sound Control protocol" msgstr "" #: gnu/packages/audio.scm:2869 msgid "" "liblo is a lightweight library that provides an easy to use\n" "implementation of the Open Sound Control (@dfn{OSC}) protocol." msgstr "" #: gnu/packages/audio.scm:2903 msgid "Common API for real-time audio I/O" msgstr "" #: gnu/packages/audio.scm:2905 msgid "" "RtAudio is a set of C++ classes that provides a common API for real-time\n" "audio input/output. It was designed with the following objectives:\n" "\n" "@itemize\n" "@item object-oriented C++ design\n" "@item simple, common API across all supported platforms\n" "@item only one source and one header file for easy inclusion in programming\n" "projects\n" "@item allow simultaneous multi-api support\n" "@item support dynamic connection of devices\n" "@item provide extensive audio device parameter control\n" "@item allow audio device capability probing\n" "@item automatic internal conversion for data format, channel number\n" "compensation, (de)interleaving, and byte-swapping\n" "@end itemize" msgstr "" #: gnu/packages/audio.scm:2939 msgid "Bindings for PortAudio v19" msgstr "" #: gnu/packages/audio.scm:2940 msgid "" "This package provides bindings for PortAudio v19, the\n" "cross-platform audio input/output stream library." msgstr "" #: gnu/packages/audio.scm:2967 msgid "Python bindings for mixer-like controls in PulseAudio" msgstr "" #: gnu/packages/audio.scm:2969 msgid "" "This package provides a Python high-level interface and ctypes-based\n" "bindings for PulseAudio (libpulse), to use in simple synchronous code.\n" "This wrapper is mostly for mixer-like controls and introspection-related\n" "operations, as opposed to e.g. submitting sound samples to play and\n" "player-like clients." msgstr "" #: gnu/packages/audio.scm:2994 msgid "Python bindings for liblo" msgstr "" #: gnu/packages/audio.scm:2996 msgid "" "Pyliblo is a Python wrapper for the liblo Open Sound Control (OSC)\n" "library. It supports almost the complete functionality of liblo, allowing you\n" "to send and receive OSC messages using a nice and simple Python API. Also\n" "included are the command line utilities @code{send_osc} and @code{dump_osc}." msgstr "" #: gnu/packages/audio.scm:3029 msgid "Python bindings for libsndfile" msgstr "" #: gnu/packages/audio.scm:3030 msgid "" "This package provides python bindings for libsndfile based on\n" "CFFI and NumPy." msgstr "" #: gnu/packages/audio.scm:3047 msgid "Python MIDI API" msgstr "" #: gnu/packages/audio.scm:3048 msgid "" "This package provides a python API to read and write MIDI\n" "files." msgstr "" #: gnu/packages/audio.scm:3084 msgid "Convert audio to multichannel MIDI" msgstr "" #: gnu/packages/audio.scm:3085 msgid "" "@command{audio-to-midi} converts audio files to multichannel\n" "MIDI files. It accomplishes this by performing FFTs on all channels of the\n" "audio data at user-specified time steps. It then separates the resulting\n" "frequency analysis into equivalence classes which correspond to the twelve tone\n" "scale; the volume of each class being the average volume of its constituent\n" "frequencies. This data is then formatted to MIDI and written to disk." msgstr "" #: gnu/packages/audio.scm:3126 msgid "Library to simplify use of LV2 plugins in applications" msgstr "" #: gnu/packages/audio.scm:3128 msgid "" "Lilv is a C library to make the use of LV2 plugins as simple as possible\n" "for applications. Lilv is the successor to SLV2, rewritten to be\n" "significantly faster and have minimal dependencies." msgstr "" #: gnu/packages/audio.scm:3154 msgid "LV2 audio plugin specification" msgstr "" #: gnu/packages/audio.scm:3156 msgid "" "LV2 is an open specification for audio plugins and host applications.\n" "At its core, LV2 is a simple stable interface, accompanied by extensions which\n" "add functionality to support the needs of increasingly powerful audio\n" "software." msgstr "" #: gnu/packages/audio.scm:3188 msgid "Turtle to C header conversion utility for LV2 plugins" msgstr "" #: gnu/packages/audio.scm:3190 msgid "" "This package provides a conversion utility for LV2 Plugin developers to\n" "generate C headers from Turtle files." msgstr "" #: gnu/packages/audio.scm:3223 msgid "LV2 port of the mda Piano plugin" msgstr "" #: gnu/packages/audio.scm:3224 msgid "An LV2 port of the mda Piano VSTi." msgstr "" #: gnu/packages/audio.scm:3237 msgid "LV2 port of the mda EPiano plugin" msgstr "" #: gnu/packages/audio.scm:3238 msgid "An LV2 port of the mda EPiano VSTi." msgstr "" #: gnu/packages/audio.scm:3262 gnu/packages/audio.scm:3303 msgid "C++ libraries for LV2 plugins" msgstr "" #: gnu/packages/audio.scm:3264 gnu/packages/audio.scm:3305 msgid "" "The LV2 Toolkit (LVTK) contains libraries that wrap the LV2 C API and\n" "extensions into easy to use C++ classes. It is the successor of\n" "lv2-c++-tools." msgstr "" #: gnu/packages/audio.scm:3347 msgid "3D audio API" msgstr "" #: gnu/packages/audio.scm:3349 msgid "" "OpenAL provides capabilities for playing audio in a virtual 3D\n" "environment. Distance attenuation, doppler shift, and directional sound\n" "emitters are among the features handled by the API. More advanced effects,\n" "including air absorption, occlusion, and environmental reverb, are available\n" "through the EFX extension. It also facilitates streaming audio, multi-channel\n" "buffers, and audio capture." msgstr "" #: gnu/packages/audio.scm:3381 msgid "Free implementation of OpenAL's ALUT standard" msgstr "" #: gnu/packages/audio.scm:3382 msgid "freealut is the OpenAL Utility Toolkit." msgstr "" #: gnu/packages/audio.scm:3412 msgid "Modular patch bay for audio and MIDI systems" msgstr "" #: gnu/packages/audio.scm:3414 msgid "" "Patchage is a modular patch bay for audio and MIDI systems based on JACK\n" "and ALSA." msgstr "" #: gnu/packages/audio.scm:3437 msgid "Portable C audio library" msgstr "" #: gnu/packages/audio.scm:3439 msgid "" "The Portable C Audio Library (pcaudiolib) provides a C@tie{}API to\n" "different audio devices such as ALSA or PulseAudio." msgstr "" #: gnu/packages/audio.scm:3469 msgid "Jack server control application" msgstr "" #: gnu/packages/audio.scm:3470 msgid "" "Control a Jack server. Allows you to plug various sources\n" "into various outputs and to start, stop and configure jackd" msgstr "" #: gnu/packages/audio.scm:3501 msgid "Stereo audio recorder for JACK" msgstr "" #: gnu/packages/audio.scm:3502 msgid "" "QJackRcd is a simple graphical stereo recorder for JACK\n" "supporting silence processing for automatic pause, file splitting, and\n" "background file post-processing." msgstr "" #: gnu/packages/audio.scm:3609 msgid "Synthesis engine and programming language" msgstr "" #: gnu/packages/audio.scm:3610 msgid "" "SuperCollider is a synthesis engine (@code{scsynth} or\n" "@code{supernova}) and programming language (@code{sclang}). It can be used\n" "for experimenting with sound synthesis and algorithmic composition.\n" "\n" "SuperCollider requires jackd to be installed in your user profile and your\n" "user must be allowed to access the realtime features of the kernel. Search\n" "for \"realtime\" in the index of the Guix manual to learn how to achieve this\n" "using Guix System." msgstr "" #: gnu/packages/audio.scm:3637 msgid "Broadcast streaming library with IDJC extensions" msgstr "" #: gnu/packages/audio.scm:3638 msgid "This package provides libshout plus IDJC extensions." msgstr "" #: gnu/packages/audio.scm:3656 msgid "Sampling rate conversion and filter design utilities" msgstr "" #: gnu/packages/audio.scm:3657 msgid "" "This package contains the @command{resample} and\n" "@command{windowfilter} command line utilities. The @command{resample} command\n" "allows changing the sampling rate of a sound file, while the\n" "@command{windowfilter} command allows designing Finite Impulse Response (FIR)\n" "filters using the so-called @emph{window method}." msgstr "" #: gnu/packages/audio.scm:3696 msgid "Audio time-stretching and pitch-shifting library" msgstr "" #: gnu/packages/audio.scm:3698 msgid "" "Rubber Band is a library and utility program that permits changing the\n" "tempo and pitch of an audio recording independently of one another." msgstr "" #: gnu/packages/audio.scm:3720 msgid "Cross-platform MIDI library for C++" msgstr "" #: gnu/packages/audio.scm:3722 msgid "" "RtMidi is a set of C++ classes (RtMidiIn, RtMidiOut, and API specific\n" "classes) that provide a common cross-platform API for realtime MIDI\n" "input/output." msgstr "" #: gnu/packages/audio.scm:3759 msgid "Library for serialising LV2 atoms to/from RDF" msgstr "" #: gnu/packages/audio.scm:3761 msgid "" "Sratom is a library for serialising LV2 atoms to/from RDF, particularly\n" "the Turtle syntax." msgstr "" #: gnu/packages/audio.scm:3787 msgid "Library for loading and wrapping LV2 plugin UIs" msgstr "" #: gnu/packages/audio.scm:3789 msgid "" "Suil is a lightweight C library for loading and wrapping LV2 plugin UIs.\n" "\n" "Suil makes it possible to load a UI of a toolkit in a host using another\n" "toolkit. The API is designed such that hosts do not need to explicitly\n" "support specific toolkits – if Suil supports a particular toolkit, then UIs in\n" "that toolkit will work in all hosts that use Suil automatically.\n" "\n" "Suil currently supports every combination of Gtk, Qt, and X11." msgstr "" #: gnu/packages/audio.scm:3819 msgid "Library implementing the EBU R 128 loudness standard" msgstr "" #: gnu/packages/audio.scm:3821 msgid "" "@code{libebur128} is a C library that implements the EBU R 128 standard\n" "for loudness normalisation." msgstr "" #: gnu/packages/audio.scm:3873 msgid "Software synthesizer for playing MIDI files" msgstr "" #: gnu/packages/audio.scm:3875 msgid "" "TiMidity++ is a software synthesizer. It can play MIDI files by\n" "converting them into PCM waveform data; give it a MIDI data along with digital\n" "instrument data files, then it synthesizes them in real-time, and plays. It\n" "can not only play sounds, but also can save the generated waveforms into hard\n" "disks as various audio file formats." msgstr "" #: gnu/packages/audio.scm:3913 msgid "Modular and extensible audio processing system" msgstr "" #: gnu/packages/audio.scm:3915 msgid "" "Vamp is an audio processing plugin system for plugins that extract\n" "descriptive information from audio data — typically referred to as audio\n" "analysis plugins or audio feature extraction plugins." msgstr "" #: gnu/packages/audio.scm:3958 msgid "Library for time stretching and pitch scaling of audio" msgstr "" #: gnu/packages/audio.scm:3960 msgid "" "SBSMS (Subband Sinusoidal Modeling Synthesis) is software for time\n" "stretching and pitch scaling of audio. This package contains the library." msgstr "" #: gnu/packages/audio.scm:3985 msgid "Musical key detection for digital audio" msgstr "" #: gnu/packages/audio.scm:3987 msgid "" "@code{libkeyfinder} is a small C++11 library for estimating the musical\n" "key of digital audio." msgstr "" #: gnu/packages/audio.scm:4015 msgid "Hybrid lossless audio codec" msgstr "" #: gnu/packages/audio.scm:4017 msgid "" "WavPack is an audio compression format with lossless, lossy and hybrid\n" "compression modes. This package contains command-line programs and library to\n" "encode and decode wavpack files." msgstr "" #: gnu/packages/audio.scm:4036 msgid "Mod file playing library" msgstr "" #: gnu/packages/audio.scm:4038 msgid "" "Libmodplug renders mod music files as raw audio data, for playing or\n" "conversion. mod, .s3m, .it, .xm, and a number of lesser-known formats are\n" "supported. Optional features include high-quality resampling, bass expansion,\n" "surround and reverb." msgstr "" #: gnu/packages/audio.scm:4057 msgid "Module player library" msgstr "" #: gnu/packages/audio.scm:4059 msgid "" "Libxmp is a library that renders module files to PCM data. It supports\n" "over 90 mainstream and obscure module formats including Protracker (MOD),\n" "Scream Tracker 3 (S3M), Fast Tracker II (XM), and Impulse Tracker (IT)." msgstr "" #: gnu/packages/audio.scm:4081 msgid "Extended module player" msgstr "" #: gnu/packages/audio.scm:4083 msgid "" "Xmp is a portable module player that plays over 90 mainstream and\n" "obscure module formats, including Protracker MOD, Fasttracker II XM, Scream\n" "Tracker 3 S3M and Impulse Tracker IT files." msgstr "" #: gnu/packages/audio.scm:4106 msgid "Audio processing library for changing tempo, pitch and playback rate" msgstr "" #: gnu/packages/audio.scm:4108 msgid "" "SoundTouch is an audio processing library for changing the tempo, pitch\n" "and playback rates of audio streams or audio files. It is intended for\n" "application developers writing sound processing tools that require tempo/pitch\n" "control functionality, or just for playing around with the sound effects." msgstr "" #: gnu/packages/audio.scm:4145 msgid "Sound processing utility" msgstr "" #: gnu/packages/audio.scm:4147 msgid "" "SoX (Sound eXchange) is a command line utility that can convert\n" "various formats of computer audio files to other formats. It can also\n" "apply various effects to these sound files, and, as an added bonus, SoX\n" "can play and record audio files." msgstr "" #: gnu/packages/audio.scm:4170 msgid "One-dimensional sample-rate conversion library" msgstr "" #: gnu/packages/audio.scm:4172 msgid "" "The SoX Resampler library (libsoxr) performs one-dimensional sample-rate\n" "conversion. It may be used, for example, to resample PCM-encoded audio." msgstr "" #: gnu/packages/audio.scm:4193 msgid "MPEG Audio Layer 2 (MP2) encoder" msgstr "" #: gnu/packages/audio.scm:4195 msgid "" "TwoLAME is an optimised MPEG Audio Layer 2 (MP2) encoder based on\n" "tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 code and\n" "portions of LAME." msgstr "" #: gnu/packages/audio.scm:4249 msgid "Audio I/O library" msgstr "" #: gnu/packages/audio.scm:4251 msgid "" "PortAudio is a portable C/C++ audio I/O library providing a simple API\n" "to record and/or play sound using a callback function or a blocking read/write\n" "interface." msgstr "" #: gnu/packages/audio.scm:4278 msgid "Graphical user interface for FluidSynth" msgstr "" #: gnu/packages/audio.scm:4280 msgid "" "Qsynth is a GUI front-end application for the FluidSynth SoundFont\n" "synthesizer written in C++." msgstr "" #: gnu/packages/audio.scm:4317 msgid "Networked audio system" msgstr "" #: gnu/packages/audio.scm:4319 msgid "" "RSound allows you to send audio from an application and transfer it\n" "directly to a different computer on your LAN network. It is an audio daemon\n" "with a much different focus than most other audio daemons." msgstr "" #: gnu/packages/audio.scm:4347 msgid "JACK audio frequency analyzer and display" msgstr "" #: gnu/packages/audio.scm:4349 msgid "" "XJackFreak is an audio analysis and equalizing tool for the Jack Audio\n" "Connection Kit. It can display the FFT of any input, modify it and output the\n" "result." msgstr "" #: gnu/packages/audio.scm:4399 msgid "Fast, partitioned convolution engine library" msgstr "" #: gnu/packages/audio.scm:4401 msgid "" "Zita convolver is a C++ library providing a real-time convolution\n" "engine." msgstr "" #: gnu/packages/audio.scm:4451 msgid "C++ library for resampling audio signals" msgstr "" #: gnu/packages/audio.scm:4453 msgid "" "Libzita-resampler is a C++ library for resampling audio signals. It is\n" "designed to be used within a real-time processing context, to be fast, and to\n" "provide high-quality sample rate conversion." msgstr "" #: gnu/packages/audio.scm:4499 msgid "" "Zita-alsa-pcmi is a C++ wrapper around the ALSA API. It provides easy\n" "access to ALSA PCM devices, taking care of the many functions required to\n" "open, initialise and use a hw: device in mmap mode, and providing floating\n" "point audio data." msgstr "" #: gnu/packages/audio.scm:4522 msgid "Cue and toc file parsers and utilities" msgstr "" #: gnu/packages/audio.scm:4523 msgid "" "Cuetools is a set of programs that are useful for manipulating\n" "and using CUE sheet (cue) files and Table of Contents (toc) files. CUE and TOC\n" "files are a way to represent the layout of a data or audio CD in a\n" "machine-readable ASCII format." msgstr "" #: gnu/packages/audio.scm:4551 msgid "Analyze MPEG layer I/II/III files" msgstr "" #: gnu/packages/audio.scm:4552 msgid "" "mp3guessenc is a command line utility that tries to detect the\n" "encoder used for an MPEG Layer III (MP3) file, as well as scan any MPEG audio\n" "file (any layer) and print a lot of useful information." msgstr "" #: gnu/packages/audio.scm:4572 msgid "WAVE audio data processing tool" msgstr "" #: gnu/packages/audio.scm:4573 msgid "" "shntool is a multi-purpose WAVE data processing and reporting\n" "utility. File formats are abstracted from its core, so it can process any file\n" "that contains WAVE data, compressed or not---provided there exists a format\n" "module to handle that particular file type. It can also generate CUE files, and\n" "use them split WAVE data into multiple files." msgstr "" #: gnu/packages/audio.scm:4612 msgid "DTS Coherent Acoustics decoder" msgstr "" #: gnu/packages/audio.scm:4613 msgid "" "Dcadec is a DTS Coherent Acoustics surround sound decoder\n" "with support for HD extensions." msgstr "" #: gnu/packages/audio.scm:4642 msgid "Digital room correction" msgstr "" #: gnu/packages/audio.scm:4644 msgid "" "DRC is a program used to generate correction filters for acoustic\n" "compensation of HiFi and audio systems in general, including listening room\n" "compensation. DRC generates just the FIR correction filters, which can be\n" "used with a real time or offline convolver to provide real time or offline\n" "correction. DRC doesn't provide convolution features, and provides only some\n" "simplified, although really accurate, measuring tools." msgstr "" #: gnu/packages/audio.scm:4682 msgid "Tool to adjust loudness of media files" msgstr "" #: gnu/packages/audio.scm:4684 msgid "" "BS1770GAIN is a loudness scanner compliant with ITU-R BS.1770 and its\n" "flavors EBU R128, ATSC A/85, and ReplayGain 2.0. It helps normalizing the\n" "loudness of audio and video files to the same level." msgstr "" #: gnu/packages/audio.scm:4715 msgid "Lightweight audio filtering library" msgstr "" #: gnu/packages/audio.scm:4716 msgid "" "An easy to use audio filtering library made from webrtc\n" "code, used in @code{libtoxcore}." msgstr "" #: gnu/packages/audio.scm:4764 msgid "GSM 06.10 lossy speech compression library" msgstr "" #: gnu/packages/audio.scm:4765 msgid "" "This C library provides an encoder and a decoder for the GSM\n" "06.10 RPE-LTP lossy speech compression algorithm." msgstr "" #: gnu/packages/audio.scm:4786 msgid "ALSA wrappers for Python" msgstr "" #: gnu/packages/audio.scm:4788 msgid "" "This package contains wrappers for accessing the ALSA API from Python.\n" "It is currently fairly complete for PCM devices, and has some support for\n" "mixers." msgstr "" #: gnu/packages/audio.scm:4808 msgid "LDAC Bluetooth encoder and ABR library" msgstr "" #: gnu/packages/audio.scm:4809 msgid "" "This package provides an encoder for the LDAC\n" "high-resolution Bluetooth audio streaming codec for streaming at up to 990\n" "kbps at 24 bit/96 kHz." msgstr "" #: gnu/packages/audio.scm:4852 msgid "Bluetooth ALSA backend" msgstr "" #: gnu/packages/audio.scm:4853 msgid "" "This project is a rebirth of a direct integration between\n" "Bluez and ALSA. Since Bluez >= 5, the built-in integration has been removed\n" "in favor of 3rd party audio applications. From now on, Bluez acts as a\n" "middleware between an audio application, which implements Bluetooth audio\n" "profile, and a Bluetooth audio device. BlueALSA registers all known Bluetooth\n" "audio profiles in Bluez, so in theory every Bluetooth device (with audio\n" "capabilities) can be connected. In order to access the audio stream, one has\n" "to connect to the ALSA PCM device called @code{bluealsa}. The device is based\n" "on the ALSA software PCM plugin." msgstr "" #: gnu/packages/audio.scm:4916 msgid "Sound editor" msgstr "ویرایشگر صدا" #: gnu/packages/audio.scm:4919 msgid "" "Snd is a sound editor modelled loosely after Emacs. It can be\n" "customized and extended using either the s7 Scheme implementation (included in\n" "the Snd sources), Ruby, or Forth." msgstr "" #: gnu/packages/audio.scm:4947 msgid "LV2 plugin for broadband noise reduction" msgstr "" #: gnu/packages/audio.scm:4948 msgid "" "Noise Repellent is an LV2 plugin to reduce noise. It has\n" "the following features:\n" "\n" "@enumerate\n" "@item Spectral gating and spectral subtraction suppression rule\n" "@item Adaptive and manual noise thresholds estimation\n" "@item Adjustable noise floor\n" "@item Adjustable offset of thresholds to perform over-subtraction\n" "@item Time smoothing and a masking estimation to reduce artifacts\n" "@item Basic onset detector to avoid transients suppression\n" "@item Whitening of the noise floor to mask artifacts and to recover higher\n" " frequencies\n" "@item Option to listen to the residual signal\n" "@item Soft bypass\n" "@item Noise profile saved with the session\n" "@end enumerate\n" msgstr "" #: gnu/packages/audio.scm:5014 msgid "Speech denoise LV2 plugin based on Xiph's RNNoise library" msgstr "" #: gnu/packages/audio.scm:5015 msgid "" "RNNoise is a library that uses deep learning to apply\n" "noise suppression to audio sources with voice presence. This package provides\n" "an LV2 audio plugin." msgstr "" #: gnu/packages/audio.scm:5058 msgid "Command-line audio visualizer" msgstr "" #: gnu/packages/audio.scm:5059 msgid "" "@code{cli-visualizer} displays fast-Fourier\n" "transforms (FFTs) of the sound being played, as well as other graphical\n" "representations." msgstr "" #: gnu/packages/audio.scm:5107 msgid "Console audio visualizer for ALSA, MPD, and PulseAudio" msgstr "" #: gnu/packages/audio.scm:5108 msgid "" "C.A.V.A. is a bar audio spectrum visualizer for the terminal\n" "using ALSA, MPD, PulseAudio, or a FIFO buffer as its input." msgstr "" #: gnu/packages/audio.scm:5141 msgid "Pro-quality GM soundfont" msgstr "" #: gnu/packages/audio.scm:5142 msgid "Fluid-3 is Frank Wen's pro-quality GM soundfont." msgstr "" #: gnu/packages/audio.scm:5163 msgid "Fraunhofer FDK AAC library" msgstr "" #: gnu/packages/audio.scm:5164 msgid "" "FDK is a library for encoding and decoding Advanced Audio\n" "Coding (AAC) format audio, developed by Fraunhofer IIS, and included as part of\n" "Android. It supports several Audio Object Types including MPEG-2 and MPEG-4 AAC\n" "LC, HE-AAC (AAC LC + SBR), HE-AACv2 (LC + SBR + PS) as well AAC-LD (low delay)\n" "and AAC-ELD (enhanced low delay) for real-time communication. The encoding\n" "library supports sample rates up to 96 kHz and up to eight channels (7.1\n" " surround)." msgstr "" #: gnu/packages/audio.scm:5199 msgid "aptX codec library" msgstr "" #: gnu/packages/audio.scm:5200 msgid "" "libfreeaptx is an implementation of the Audio Processing\n" "Technology codecs aptX and aptX HD, mainly intended for use with an A2DP\n" "bluetooth profile." msgstr "" #: gnu/packages/audio.scm:5234 msgid "Audio editing and playback for OpenShot" msgstr "" #: gnu/packages/audio.scm:5235 msgid "" "OpenShot Audio Library (libopenshot-audio) allows\n" "high-quality editing and playback of audio, and is based on the JUCE\n" "library." msgstr "" #: gnu/packages/audio.scm:5260 msgid "XAudio reimplementation" msgstr "" #: gnu/packages/audio.scm:5261 msgid "" "FAudio is an XAudio reimplementation that focuses solely on\n" "developing fully accurate DirectX Audio runtime libraries." msgstr "" #: gnu/packages/audio.scm:5287 msgid "Binaural beat synthesizer" msgstr "" #: gnu/packages/audio.scm:5288 msgid "" "Gnaural is a programmable auditory binaural beat synthesizer\n" "intended to be used for brainwave entrainment. Gnaural supports creation of\n" "binaural beat tracks of different frequencies and exporting of tracks into\n" "different audio formats. Gnaural can also be linked over the internet with\n" "other Gnaural instances, allowing synchronous sessions between many users." msgstr "" #: gnu/packages/audio.scm:5322 msgid "Live audio streamer" msgstr "" #: gnu/packages/audio.scm:5323 msgid "" "DarkIce is a live audio streamer. It takes audio input from\n" "a sound card, encodes it into Ogg Vorbis and/or mp3, and sends the audio\n" "stream to one or more IceCast and/or ShoutCast servers." msgstr "" #: gnu/packages/audio.scm:5345 msgid "Encode or decode Linear/Longitudinal Time Code (LTC) audio" msgstr "" #: gnu/packages/audio.scm:5346 msgid "" "Libltc is a POSIX-C Library for handling\n" "@dfn{Linear/Longitudinal Time Code} (LTC) data." msgstr "" #: gnu/packages/audio.scm:5378 msgid "TTA lossless audio encoder" msgstr "" #: gnu/packages/audio.scm:5380 msgid "" "TTA performs lossless compression on multichannel 8,16 and 24 bits\n" "data of the Wav audio files. Being lossless means that no data-\n" "quality is lost in the compression - when uncompressed, the data will\n" "be identical to the original. The compression ratios of TTA depend on\n" "the type of music file being compressed, but the compression size\n" "will generally range between 30% - 70% of the original. TTA format\n" "supports both of ID3v1/v2 and APEv2 tags." msgstr "" #: gnu/packages/audio.scm:5412 msgid "C library for real-time audio input and output" msgstr "" #: gnu/packages/audio.scm:5413 msgid "" "@code{libsoundio} is a C library providing audio input and\n" "output. The API is suitable for real-time software such as digital audio\n" "workstations as well as consumer software such as music players." msgstr "" #: gnu/packages/audio.scm:5438 msgid "Small GUI toolkit" msgstr "" #: gnu/packages/audio.scm:5439 msgid "" "Redkite is a small GUI toolkit developed in C++17 and\n" "inspired from other well known GUI toolkits such as Qt and GTK. It is\n" "minimal on purpose and is intended to be statically linked to applications,\n" "therefore satisfying any requirements they may have to be self contained,\n" "as is the case with audio plugins." msgstr "" #: gnu/packages/audio.scm:5507 msgid "Audio plugin host" msgstr "" #: gnu/packages/audio.scm:5508 msgid "" "Carla is a modular audio plugin host, with features like\n" "transport control, automation of parameters via MIDI CC and remote control\n" "over OSC. Carla currently supports LADSPA (including LRDF), DSSI, LV2, VST2,\n" "and VST3 plugin formats, plus SF2 and SFZ file support. It uses JACK as the\n" "default and preferred audio driver but also supports native drivers like ALSA." msgstr "" #: gnu/packages/audio.scm:5543 msgid "Multitrack audio processing" msgstr "" #: gnu/packages/audio.scm:5544 msgid "" "Ecasound is a software package designed for multitrack audio\n" "processing. It can be used for simple tasks like audio playback, recording and\n" "format conversions, as well as for multitrack effect processing, mixing,\n" "recording and signal recycling. Ecasound supports a wide range of audio inputs,\n" "outputs and effect algorithms. Effects and audio objects can be combined in\n" "various ways, and their parameters can be controlled by operator objects like\n" "oscillators and MIDI-CCs. A versatile console mode user-interface is included\n" "in the package." msgstr "" #: gnu/packages/audio.scm:5581 msgid "Library for reading and resampling audio files" msgstr "" #: gnu/packages/audio.scm:5582 msgid "" "libaudec is a wrapper library over ffmpeg, sndfile and\n" "libsamplerate for reading and resampling audio files, based on Robin Gareus'\n" "@code{audio_decoder} code." msgstr "" #: gnu/packages/audio.scm:5611 msgid "LV2 plugin lint tool" msgstr "" #: gnu/packages/audio.scm:5612 msgid "" "lv2lint is an LV2 lint-like tool that checks whether a\n" "given plugin and its UI(s) match up with the provided metadata and adhere\n" "to well-known best practices." msgstr "" #: gnu/packages/audio.scm:5644 msgid "Documentation generator for LV2 plugins" msgstr "" #: gnu/packages/audio.scm:5646 msgid "" "lv2toweb allows the user to create an xhtml page with information\n" "about the given LV2 plugin, provided that the plugin and its UI(s) match up\n" "with the provided metadata and adhere to well-known best practices." msgstr "" #: gnu/packages/audio.scm:5673 msgid "GUI toolkit for LV2 plugins" msgstr "" #: gnu/packages/audio.scm:5674 msgid "" "ZToolkit (Ztk) is a cross-platform GUI toolkit heavily\n" "inspired by GTK. It handles events and low level drawing on behalf of\n" "the user and provides a high-level API for managing the UI and custom\n" "widgets. ZToolkit is written in C and was created to be used for building\n" "audio plugin UIs, where the dependencies often need to be kept to a\n" "minimum." msgstr "" #: gnu/packages/audio.scm:5705 msgid "Instrument file software library" msgstr "" #: gnu/packages/audio.scm:5707 msgid "" "libInstPatch is a library for processing digital sample based MIDI\n" "instrument \"patch\" files. The types of files libInstPatch supports are used\n" "for creating instrument sounds for wavetable synthesis. libInstPatch provides\n" "an object framework (based on GObject) to load patch files, which can then be\n" "edited, converted, compressed and saved." msgstr "" #: gnu/packages/audio.scm:5722 msgid "ZToolkit with SVG support" msgstr "" #: gnu/packages/audio.scm:5753 msgid "Digital signal processing library" msgstr "" #: gnu/packages/audio.scm:5754 msgid "" "The LSP DSP library provides a set of functions that perform\n" "SIMD-optimized computing on several hardware architectures. All functions\n" "currently operate on IEEE-754 single-precision floating-point numbers." msgstr "" #: gnu/packages/audio.scm:5783 msgid "Speech codec" msgstr "رمزینهٔ صحبت" #: gnu/packages/audio.scm:5785 msgid "" "Codec 2 is a speech codec designed for communications quality speech\n" "between 700 and 3200 bit/s. The main application is low bandwidth HF/VHF\n" "digital radio." msgstr "" #: gnu/packages/audio.scm:5809 msgid "P25 Phase 1 and ProVoice vocoder" msgstr "" #: gnu/packages/audio.scm:5811 msgid "" "The mbelib library provides support for the 7200x4400 bit/s codec used\n" "in P25 Phase 1, the 7100x4400 bit/s codec used in ProVoice and the @emph{Half\n" "Rate} 3600x2250 bit/s vocoder used in various radio systems." msgstr "" #: gnu/packages/audio.scm:5902 msgid "Synchronize musical beat, tempo, and phase across multiple applications" msgstr "" #: gnu/packages/audio.scm:5904 msgid "" "Ableton Link is a C++ library that synchronizes musical beat, tempo, and phase\n" "across multiple applications running on one or more devices. Applications on devices\n" "connected to a local network discover each other automatically and form a musical\n" "session in which each participant can perform independently: anyone can start or stop\n" "while still staying in time." msgstr "" #: gnu/packages/audio.scm:5963 msgid "Audio streaming tool" msgstr "" #: gnu/packages/audio.scm:5964 msgid "" "Butt is a tool to stream audio to a ShoutCast or\n" "Icecast server." msgstr "" #: gnu/packages/audio.scm:6009 msgid "Signal generation tools" msgstr "" #: gnu/packages/audio.scm:6010 msgid "" "siggen is a set of tools for imitating a laboratory signal\n" "generator, generating audio signals out of Linux's /dev/dsp audio\n" "device. There is support for mono and/or stereo and 8 or 16 bit samples." msgstr "" #: gnu/packages/audio.scm:6056 msgid "Python wrapper around SoX" msgstr "" #: gnu/packages/audio.scm:6057 msgid "" "@code{python-pysox} is a wrapper around the @command{sox}\n" "command line tool. The API offers @code{Transformer} and @code{Combiner}\n" "classes that allow the user to incrementally build up effects and audio\n" "manipulations. @code{python-pysox} also provides methods for querying audio\n" "information such as sample rate, determining whether an audio file is silent,\n" "and much more." msgstr "" #: gnu/packages/audio.scm:6094 msgid "Efficient signal resampling" msgstr "" #: gnu/packages/audio.scm:6096 msgid "" "@code{python-resampy} implements the band-limited sinc interpolation\n" "method for sampling rate conversion as described by Julius O. Smith at the\n" "@url{https://ccrma.stanford.edu/~jos/resample/, Digital Audio Resampling\n" "Home Page}." msgstr "" #: gnu/packages/audio.scm:6130 msgid "Python module for audio and music processing" msgstr "" #: gnu/packages/audio.scm:6132 msgid "" "@code{librosa} is a python package for music and audio analysis. It\n" "provides the building blocks necessary to create music information retrieval\n" "systems." msgstr "" #: gnu/packages/audio.scm:6163 msgid "Audio plug-in pack for LV2" msgstr "" #: gnu/packages/audio.scm:6165 msgid "" "MDA-LV2 is an LV2 port of the MDA plugins. It includes effects and a few\n" "instrument plugins." msgstr "" #: gnu/packages/audio.scm:6195 msgid "Library for decoding Super Audio CDs (SACD)" msgstr "" #: gnu/packages/audio.scm:6197 msgid "" "The Odio SACD shared library is a decoding engine which takes a Super\n" "Audio CD source and extracts a 24-bit high resolution WAV file. It handles\n" "both DST and DSD streams." msgstr "" #: gnu/packages/audio.scm:6220 msgid "Rip Super Audio CDs (SACD)" msgstr "" #: gnu/packages/audio.scm:6222 msgid "" "Odio SACD is a command-line application which takes a Super Audio CD\n" "source and extracts a 24-bit high resolution WAV file. It handles both DST\n" "and DSD streams." msgstr "" #: gnu/packages/audio.scm:6249 msgid "PipeWire graph manager" msgstr "" #: gnu/packages/audio.scm:6251 msgid "" "qpwgraph is a graph manager dedicated to PipeWire, using the Qt C++\n" "framework. It provides a visual interface to audio and video connections\n" "managed by PipeWire." msgstr "" #: gnu/packages/audio.scm:6277 msgid "Record audio streams to your hard drive" msgstr "" #: gnu/packages/audio.scm:6278 msgid "" "Streamripper records shoutcast-compatible\n" "streams. For shoutcast style streams it finds the “meta data” or track\n" "separation data, and uses that as a marker for where the track should\n" "be separated." msgstr "" #: gnu/packages/audio.scm:6315 msgid "Cross-platform audio library" msgstr "" #: gnu/packages/audio.scm:6316 msgid "Cubeb is Mozilla's cross-platform audio library." msgstr "" #: gnu/packages/backup.scm:166 msgid "Encrypted backup using rsync algorithm" msgstr "" #: gnu/packages/backup.scm:168 msgid "" "Duplicity backs up directories by producing encrypted tar-format volumes\n" "and uploading them to a remote or local file server. Because duplicity uses\n" "librsync, the incremental archives are space efficient and only record the\n" "parts of files that have changed since the last backup. Because duplicity\n" "uses GnuPG to encrypt and/or sign these archives, they will be safe from\n" "spying and/or modification by the server." msgstr "" #: gnu/packages/backup.scm:192 msgid "File verification and repair tools" msgstr "" #: gnu/packages/backup.scm:193 msgid "" "Par2cmdline uses Reed-Solomon error-correcting codes to\n" "generate and verify PAR2 recovery files. These files can be distributed\n" "alongside the source files or stored together with back-ups to protect against\n" "transmission errors or @dfn{bit rot}, the degradation of storage media over\n" "time.\n" "Unlike a simple checksum, PAR2 doesn't merely detect errors: as long as the\n" "damage isn't too extensive (and smaller than the size of the recovery file), it\n" "can even repair them." msgstr "" #: gnu/packages/backup.scm:230 msgid "Simple incremental backup tool" msgstr "" #: gnu/packages/backup.scm:232 msgid "" "Hdup2 is a backup utility, its aim is to make backup really simple. The\n" "backup scheduling is done by means of a cron job. It supports an\n" "include/exclude mechanism, remote backups, encrypted backups and split\n" "backups (called chunks) to allow easy burning to CD/DVD." msgstr "" #: gnu/packages/backup.scm:327 msgid "Multi-format archive and compression library" msgstr "" #: gnu/packages/backup.scm:329 msgid "" "Libarchive provides a flexible interface for reading and writing\n" "archives in various formats such as tar and cpio. Libarchive also supports\n" "reading and writing archives compressed using various compression filters such\n" "as gzip and bzip2. The library is inherently stream-oriented; readers\n" "serially iterate through the archive, writers serially add things to the\n" "archive. In particular, note that there is currently no built-in support for\n" "random access nor for in-place modification. This package provides the\n" "@command{bsdcat}, @command{bsdcpio} and @command{bsdtar} commands." msgstr "" #: gnu/packages/backup.scm:392 msgid "Provide a list of files to backup" msgstr "" #: gnu/packages/backup.scm:394 msgid "" "Rdup is a utility inspired by rsync and the plan9 way of doing backups.\n" "Rdup itself does not backup anything, it only print a list of absolute\n" "file names to standard output. Auxiliary scripts are needed that act on this\n" "list and implement the backup strategy." msgstr "" #: gnu/packages/backup.scm:431 msgid "Efficient backups using parity snapshots across disk arrays" msgstr "" #: gnu/packages/backup.scm:433 msgid "" "SnapRAID backs up files stored across multiple storage devices, such as\n" "disk arrays, in an efficient way reminiscent of its namesake @acronym{RAID,\n" "Redundant Array of Independent Disks} level 4.\n" "\n" "Instead of creating a complete copy of the data like classic backups do, it\n" "saves space by calculating one or more sets of parity information that's a\n" "fraction of the size. Each parity set is stored on an additional device the\n" "size of the largest single storage volume, and protects against the loss of any\n" "one device, up to a total of six. If more devices fail than there are parity\n" "sets, (only) the files they contained are lost, not the entire array. Data\n" "corruption by unreliable devices can also be detected and repaired.\n" "\n" "SnapRAID is distinct from actual RAID in that it operates on files and creates\n" "distinct snapshots only when run. It mainly targets large collections of big\n" "files that rarely change, like home media centers. One disadvantage is that\n" "@emph{all} data not in the latest snapshot may be lost if one device fails. An\n" "advantage is that accidentally deleted files can be recovered, which is not the\n" "case with RAID.\n" "\n" "It's also more flexible than true RAID: devices can have different sizes and\n" "more can be added without disturbing others. Devices that are not in use can\n" "remain fully idle, saving power and producing less noise." msgstr "" #: gnu/packages/backup.scm:481 msgid "Tar-compatible archiver" msgstr "" #: gnu/packages/backup.scm:483 msgid "" "Btar is a tar-compatible archiver which allows arbitrary compression and\n" "ciphering, redundancy, differential backup, indexed extraction, multicore\n" "compression, input and output serialisation, and tolerance to partial archive\n" "errors." msgstr "" #: gnu/packages/backup.scm:508 msgid "Local/remote mirroring+incremental backup" msgstr "" #: gnu/packages/backup.scm:510 msgid "" "Rdiff-backup backs up one directory to another, possibly over a network.\n" "The target directory ends up a copy of the source directory, but extra reverse\n" "diffs are stored in a special subdirectory of that target directory, so you\n" "can still recover files lost some time ago. The idea is to combine the best\n" "features of a mirror and an incremental backup. Rdiff-backup also preserves\n" "subdirectories, hard links, dev files, permissions, uid/gid ownership,\n" "modification times, extended attributes, acls, and resource forks. Also,\n" "rdiff-backup can operate in a bandwidth efficient manner over a pipe, like\n" "rsync. Thus you can use rdiff-backup and ssh to securely back a hard drive up\n" "to a remote location, and only the differences will be transmitted. Finally,\n" "rdiff-backup is easy to use and settings have sensible defaults." msgstr "" #: gnu/packages/backup.scm:545 msgid "Deduplicating snapshot backup utility based on rsync" msgstr "" #: gnu/packages/backup.scm:546 msgid "" "rsnapshot is a file system snapshot utility based on rsync.\n" "rsnapshot makes it easy to make periodic snapshots of local machines, and\n" "remote machines over SSH. To reduce the disk space required for each backup,\n" "rsnapshot uses hard links to deduplicate identical files." msgstr "" #: gnu/packages/backup.scm:632 msgid "Tools & library for data backup and distributed storage" msgstr "" #: gnu/packages/backup.scm:634 msgid "" "Libchop is a set of utilities and library for data backup and\n" "distributed storage. Its main application is @command{chop-backup}, an\n" "encrypted backup program that supports data integrity checks, versioning,\n" "distribution among several sites, selective sharing of stored data, adaptive\n" "compression, and more. The library itself implements storage techniques such\n" "as content-addressable storage, content hash keys, Merkle trees, similarity\n" "detection, and lossless compression." msgstr "" #: gnu/packages/backup.scm:767 msgid "Deduplicated, encrypted, authenticated and compressed backups" msgstr "" #: gnu/packages/backup.scm:768 msgid "" "Borg is a deduplicating backup program. Optionally, it\n" "supports compression and authenticated encryption. The main goal of Borg is to\n" "provide an efficient and secure way to backup data. The data deduplication\n" "technique used makes Borg suitable for daily backups since only changes are\n" "stored. The authenticated encryption technique makes it suitable for storing\n" "backups on untrusted computers." msgstr "" #: gnu/packages/backup.scm:798 msgid "WIM file manipulation library and utilities" msgstr "" #: gnu/packages/backup.scm:799 msgid "" "wimlib is a C library and set of command-line utilities for\n" "creating, modifying, extracting, and mounting archives in the Windows Imaging\n" "Format (@dfn{WIM files}). It can capture and apply WIMs directly from and to\n" "NTFS volumes using @code{ntfs-3g}, preserving NTFS-specific attributes." msgstr "" #: gnu/packages/backup.scm:905 msgid "Fast, disk based, rotating network backup system" msgstr "" #: gnu/packages/backup.scm:907 msgid "" "With dirvish you can maintain a set of complete images of your\n" "file systems with unattended creation and expiration. A dirvish backup vault\n" "is like a time machine for your data." msgstr "" #: gnu/packages/backup.scm:1001 msgid "Backup program with multiple revisions, encryption and more" msgstr "" #: gnu/packages/backup.scm:1002 msgid "" "Restic is a program that does backups right and was designed\n" "with the following principles in mind:\n" "\n" "@itemize\n" "@item Easy: Doing backups should be a frictionless process, otherwise you\n" "might be tempted to skip it. Restic should be easy to configure and use, so\n" "that, in the event of a data loss, you can just restore it. Likewise,\n" "restoring data should not be complicated.\n" "\n" "@item Fast: Backing up your data with restic should only be limited by your\n" "network or hard disk bandwidth so that you can backup your files every day.\n" "Nobody does backups if it takes too much time. Restoring backups should only\n" "transfer data that is needed for the files that are to be restored, so that\n" "this process is also fast.\n" "\n" "@item Verifiable: Much more important than backup is restore, so restic\n" "enables you to easily verify that all data can be restored. @item Secure:\n" "Restic uses cryptography to guarantee confidentiality and integrity of your\n" "data. The location the backup data is stored is assumed not to be a trusted\n" "environment (e.g. a shared space where others like system administrators are\n" "able to access your backups). Restic is built to secure your data against\n" "such attackers.\n" "\n" "@item Efficient: With the growth of data, additional snapshots should only\n" "take the storage of the actual increment. Even more, duplicate data should be\n" "de-duplicated before it is actually written to the storage back end to save\n" "precious backup space.\n" "@end itemize" msgstr "" #: gnu/packages/backup.scm:1051 msgid "Versatile deduplicating backup tool" msgstr "" #: gnu/packages/backup.scm:1053 msgid "" "ZBackup is a globally-deduplicating backup tool, based on the\n" "ideas found in Rsync. Feed a large @file{.tar} into it, and it will\n" "store duplicate regions of it only once, then compress and optionally\n" "encrypt the result. Feed another @file{.tar} file, and it will also\n" "re-use any data found in any previous backups. This way only new\n" "changes are stored, and as long as the files are not very different,\n" "the amount of storage required is very low. Any of the backup files\n" "stored previously can be read back in full at any time. The program\n" "is format-agnostic, so you can feed virtually any files to it." msgstr "" #: gnu/packages/backup.scm:1088 msgid "Ext2/3/4 file system dump/restore utilities" msgstr "" #: gnu/packages/backup.scm:1089 msgid "" "Dump examines files in a file system, determines which ones\n" "need to be backed up, and copies those files to a specified disk, tape or\n" "other storage medium. Subsequent incremental backups can then be layered on\n" "top of the full backup. The restore command performs the inverse function of\n" "dump; it can restore a full backup of a file system. Single files and\n" "directory subtrees may also be restored from full or partial backups in\n" "interactive mode." msgstr "" #: gnu/packages/backup.scm:1152 msgid "Backup tool for Btrfs subvolumes" msgstr "" #: gnu/packages/backup.scm:1153 msgid "" "Btrbk is a backup tool for Btrfs subvolumes, taking\n" "advantage of Btrfs specific capabilities to create atomic snapshots and\n" "transfer them incrementally to your backup locations. The source and target\n" "locations are specified in a config file, which allows easily configuring\n" "simple scenarios like e.g. a @i{laptop with locally attached backup disks}, as\n" "well as more complex ones, e.g. a @i{server receiving backups from several\n" "hosts via SSH, with different retention policy}. It has features such as:\n" "@itemize\n" "@item atomic snapshots\n" "@item incremental backups\n" "@item flexible retention policy\n" "@item backups to multiple destinations\n" "@item transfer via SSH\n" "@item resume backups (for removable and mobile devices)\n" "@item archive to offline storage\n" "@item encrypted backups to non-btrfs storage\n" "@item wildcard subvolumes (useful for Docker and LXC containers)\n" "@item transaction log\n" "@item comprehensive list and statistics output\n" "@item resolve and trace Btrfs parent-child and received-from relationships\n" "@item list file changes between backups\n" "@item calculate accurate disk space usage based on block regions.\n" "@end itemize\n" "Btrbk is designed to run as a cron job for triggering periodic snapshots and\n" "backups, as well as from the command line (e.g. for instantly creating\n" "additional snapshots)." msgstr "" #: gnu/packages/backup.scm:1215 msgid "Differential backup and restore" msgstr "" #: gnu/packages/backup.scm:1216 msgid "" "Burp is a network backup and restore program. It attempts\n" "to reduce network traffic and the amount of space that is used by each\n" "backup." msgstr "" #: gnu/packages/backup.scm:1246 msgid "Software archive disassembler" msgstr "" #: gnu/packages/backup.scm:1247 msgid "" "Disarchive can disassemble software archives into data\n" "and metadata. The goal is to create a small amount of metadata that\n" "can be used to recreate a software archive bit-for-bit from the\n" "original files. For example, a software archive made using tar and\n" "Gzip will need to describe the order of files in the tarball and the\n" "compression parameters used by Gzip." msgstr "" #: gnu/packages/backup.scm:1290 msgid "Simple, configuration-driven backup software" msgstr "" #: gnu/packages/backup.scm:1292 msgid "" "borgmatic is simple, configuration-driven backup software for servers\n" "and workstations. Protect your files with client-side encryption. Backup\n" "your databases too. Monitor it all with integrated third-party services.\n" "borgmatic is powered by borg." msgstr "" #: gnu/packages/backup.scm:1351 msgid "Graphical backup client based on BorgBackup" msgstr "" #: gnu/packages/backup.scm:1352 msgid "" "Vorta is a graphical backup client based on the Borg backup\n" "tool. It supports the use of remote backup repositories. It can perform\n" "scheduled backups, and has a graphical tool for browsing and extracting the Borg\n" "archives." msgstr "" #: gnu/packages/backup.scm:1374 msgid "GTK frontend for rsync" msgstr "" #: gnu/packages/backup.scm:1376 msgid "" "Grsync is a simple graphical interface using GTK for the @command{rsync}\n" "command line program. It currently supports only a limited set of the most\n" "important rsync features, but can be used effectively for local directory\n" "synchronization." msgstr "" #: gnu/packages/base.scm:98 msgid "Hello, GNU world: An example GNU package" msgstr "" #: gnu/packages/base.scm:100 msgid "" "GNU Hello prints the message \"Hello, world!\" and then exits. It\n" "serves as an example of standard GNU coding practices. As such, it supports\n" "command-line arguments, multiple languages, and so on." msgstr "" #: gnu/packages/base.scm:149 msgid "Print lines matching a pattern" msgstr "" #: gnu/packages/base.scm:151 msgid "" "grep is a tool for finding text inside files. Text is found by\n" "matching a pattern provided by the user in one or many files. The pattern\n" "may be provided as a basic or extended regular expression, or as fixed\n" "strings. By default, the matching text is simply printed to the screen,\n" "however the output can be greatly customized to include, for example, line\n" "numbers. GNU grep offers many extensions over the standard utility,\n" "including, for example, recursive directory searching." msgstr "" #: gnu/packages/base.scm:191 msgid "Stream editor" msgstr "ویرایشگر جریان" #: gnu/packages/base.scm:194 msgid "" "Sed is a non-interactive, text stream editor. It receives a text\n" "input from a file or from standard input and it then applies a series of text\n" "editing commands to the stream and prints its output to standard output. It\n" "is often used for substituting text patterns in a stream. The GNU\n" "implementation offers several extensions over the standard utility." msgstr "" #: gnu/packages/base.scm:250 msgid "Managing tar archives" msgstr "" #: gnu/packages/base.scm:252 msgid "" "Tar provides the ability to create tar archives, as well as the\n" "ability to extract, update or list files in an existing archive. It is\n" "useful for combining many files into one larger file, while maintaining\n" "directory structure and file information such as permissions and\n" "creation/modification dates. GNU tar offers many extensions over the\n" "standard utility." msgstr "" #: gnu/packages/base.scm:281 msgid "Apply differences to originals, with optional backups" msgstr "" #: gnu/packages/base.scm:283 msgid "" "Patch is a program that applies changes to files based on differences\n" "laid out as by the program \"diff\". The changes may be applied to one or more\n" "files depending on the contents of the diff file. It accepts several\n" "different diff formats. It may also be used to revert previously applied\n" "differences." msgstr "" #: gnu/packages/base.scm:309 msgid "Comparing and merging files" msgstr "" #: gnu/packages/base.scm:311 msgid "" "GNU Diffutils is a package containing tools for finding the\n" "differences between files. The \"diff\" command is used to show how two files\n" "differ, while \"cmp\" shows the offsets and line numbers where they differ.\n" "\"diff3\" allows you to compare three files. Finally, \"sdiff\" offers an\n" "interactive means to merge two files." msgstr "" #: gnu/packages/base.scm:346 msgid "Operating on files matching given criteria" msgstr "" #: gnu/packages/base.scm:348 msgid "" "Findutils supplies the basic file directory searching utilities of the\n" "GNU system. It consists of two primary searching utilities: \"find\"\n" "recursively searches for files in a directory according to given criteria and\n" "\"locate\" lists files in a database that match a query. Two auxiliary tools\n" "are included: \"updatedb\" updates the file name database and \"xargs\" may be\n" "used to apply commands with arbitrarily long arguments." msgstr "" #: gnu/packages/base.scm:442 msgid "Core GNU utilities (file, text, shell)" msgstr "" #: gnu/packages/base.scm:444 msgid "" "GNU Coreutils package includes all of the basic command-line tools that\n" "are expected in a POSIX system, excluding shell. This package is the union of\n" "the GNU fileutils, sh-utils, and textutils packages. Most of these tools\n" "offer extended functionality beyond that which is outlined in the POSIX\n" "standard." msgstr "" #: gnu/packages/base.scm:519 msgid "Remake files automatically" msgstr "" #: gnu/packages/base.scm:521 msgid "" "Make is a program that is used to control the production of\n" "executables or other files from their source files. The process is\n" "controlled from a Makefile, in which the developer specifies how each file is\n" "generated from its source. It has powerful dependency resolution and the\n" "ability to determine when files have to be regenerated after their sources\n" "change. GNU make offers many powerful extensions over the standard utility." msgstr "" #: gnu/packages/base.scm:598 msgid "Binary utilities: bfd gas gprof ld" msgstr "" #: gnu/packages/base.scm:600 msgid "" "GNU Binutils is a collection of tools for working with binary files.\n" "Perhaps the most notable are \"ld\", a linker, and \"as\", an assembler.\n" "Other tools include programs to display binary profiling information, list\n" "the strings in a binary file, and utilities for working with archives. The\n" "\"bfd\" library for working with executable and object formats is also\n" "included." msgstr "" #: gnu/packages/base.scm:724 msgid "The linker wrapper" msgstr "" #: gnu/packages/base.scm:726 msgid "" "The linker wrapper (or @code{ld-wrapper}) wraps the linker to add any\n" "missing @code{-rpath} flags, and to detect any misuse of libraries outside of\n" "the store." msgstr "" #: gnu/packages/base.scm:960 msgid "The GNU C Library" msgstr "" #: gnu/packages/base.scm:962 msgid "" "Any Unix-like operating system needs a C library: the library which\n" "defines the \"system calls\" and other basic facilities such as open, malloc,\n" "printf, exit...\n" "\n" "The GNU C library is used as the C library in the GNU system and most systems\n" "with the Linux kernel." msgstr "" #: gnu/packages/base.scm:1155 msgid "All the locales supported by the GNU C Library" msgstr "" #: gnu/packages/base.scm:1157 msgid "" "This package provides all the locales supported by the GNU C Library,\n" "more than 400 in total. To use them set the @code{LOCPATH} environment variable\n" "to the @code{share/locale} sub-directory of this package." msgstr "" #: gnu/packages/base.scm:1315 msgid "Find full path of shell commands" msgstr "" #: gnu/packages/base.scm:1317 msgid "" "The which program finds the location of executables in PATH, with a\n" "variety of options. It is an alternative to the shell \"type\" built-in\n" "command." msgstr "" #: gnu/packages/base.scm:1439 msgid "Database of current and historical time zones" msgstr "" #: gnu/packages/base.scm:1440 msgid "" "The Time Zone Database (often called tz or zoneinfo)\n" "contains code and data that represent the history of local time for many\n" "representative locations around the globe. It is updated periodically to\n" "reflect changes made by political bodies to time zone boundaries, UTC offsets,\n" "and daylight-saving rules." msgstr "" #: gnu/packages/base.scm:1476 msgid "Character set conversion library" msgstr "" #: gnu/packages/base.scm:1478 msgid "" "libiconv provides an implementation of the iconv function for systems\n" "that lack it. iconv is used to convert between character encodings in a\n" "program. It supports a wide variety of different encodings." msgstr "" #: gnu/packages/bittorrent.scm:140 msgid "Fast and easy BitTorrent client" msgstr "" #: gnu/packages/bittorrent.scm:142 msgid "" "Transmission is a BitTorrent client that comes with graphical,\n" "textual, and Web user interfaces. Transmission also has a daemon for\n" "unattended operations. It supports local peer discovery, full encryption,\n" "DHT, µTP, PEX and Magnet Links." msgstr "" #: gnu/packages/bittorrent.scm:175 msgid "Gtk frontend to the Transmission daemon" msgstr "" #: gnu/packages/bittorrent.scm:176 msgid "" "transmission-remote-gtk is a GTK client for remote management\n" "of the Transmission BitTorrent client, using its HTTP RPC protocol." msgstr "" #: gnu/packages/bittorrent.scm:196 msgid "BitTorrent library of rtorrent" msgstr "" #: gnu/packages/bittorrent.scm:198 msgid "" "LibTorrent is a BitTorrent library used by and developed in parallel\n" "with the BitTorrent client rtorrent. It is written in C++ with emphasis on\n" "speed and efficiency." msgstr "" #: gnu/packages/bittorrent.scm:224 msgid "BitTorrent client with ncurses interface" msgstr "" #: gnu/packages/bittorrent.scm:226 msgid "" "rTorrent is a BitTorrent client with an ncurses interface. It supports\n" "full encryption, DHT, PEX, and Magnet Links. It can also be controlled via\n" "XML-RPC over SCGI." msgstr "" #: gnu/packages/bittorrent.scm:258 msgid "Console client for the Transmission BitTorrent daemon" msgstr "" #: gnu/packages/bittorrent.scm:259 msgid "" "Tremc is a console client, with a curses interface, for the\n" "Transmission BitTorrent daemon." msgstr "" #: gnu/packages/bittorrent.scm:306 msgid "Utility for parallel downloading files" msgstr "" #: gnu/packages/bittorrent.scm:308 msgid "" "Aria2 is a lightweight, multi-protocol & multi-source command-line\n" "download utility. It supports HTTP/HTTPS, FTP, SFTP, BitTorrent and Metalink.\n" "Aria2 can be manipulated via built-in JSON-RPC and XML-RPC interfaces." msgstr "" #: gnu/packages/bittorrent.scm:342 msgid "Universal download manager with GTK+ interface" msgstr "" #: gnu/packages/bittorrent.scm:344 msgid "" "uGet is portable download manager with GTK+ interface supporting\n" "HTTP, HTTPS, BitTorrent and Metalink, supporting multi-connection\n" "downloads, download scheduling, download rate limiting." msgstr "" #: gnu/packages/bittorrent.scm:374 msgid "Utility to create BitTorrent metainfo files" msgstr "" #: gnu/packages/bittorrent.scm:376 msgid "" "mktorrent is a simple command-line utility to create BitTorrent\n" "@dfn{metainfo} files, often known simply as @dfn{torrents}, from both single\n" "files and whole directories. It can add multiple trackers and web seed URLs,\n" "and set the @code{private} flag to disallow advertisement through the\n" "distributed hash table (@dfn{DHT}) and Peer Exchange. Hashing is multi-threaded\n" "and will take advantage of multiple processor cores where possible." msgstr "" #: gnu/packages/bittorrent.scm:433 msgid "Feature-complete BitTorrent implementation" msgstr "" #: gnu/packages/bittorrent.scm:435 msgid "" "libtorrent-rasterbar is a feature-complete C++ BitTorrent implementation\n" "focusing on efficiency and scalability. It runs on embedded devices as well as\n" "desktops." msgstr "" #: gnu/packages/bittorrent.scm:484 msgid "Graphical BitTorrent client" msgstr "" #: gnu/packages/bittorrent.scm:486 msgid "" "qBittorrent is a BitTorrent client programmed in C++/Qt that uses\n" "libtorrent (sometimes called libtorrent-rasterbar) by Arvid Norberg.\n" "\n" "It aims to be a good alternative to all other BitTorrent clients out there.\n" "qBittorrent is fast, stable and provides unicode support as well as many\n" "features." msgstr "" #: gnu/packages/bittorrent.scm:565 msgid "Fully-featured cross-platform ​BitTorrent client" msgstr "" #: gnu/packages/bittorrent.scm:567 msgid "" "Deluge contains the common features to BitTorrent clients such as\n" "Protocol Encryption, DHT, Local Peer Discovery (LSD), Peer Exchange\n" "(PEX), UPnP, NAT-PMP, Proxy support, Web seeds, global and per-torrent\n" "speed limits. Deluge heavily utilises the ​libtorrent library. It is\n" "designed to run as both a normal standalone desktop application and as a\n" "​client-server." msgstr "" #: gnu/packages/certs.scm:80 msgid "Certbot DNS challenge automatization for deSEC" msgstr "" #: gnu/packages/certs.scm:81 msgid "" "The deSEC can be used to obtain certificates with certbot\n" "DNS ownership verification. With the help of this hook script, you can obtain\n" "your Let's Encrypt certificate using certbot with authorization provided by the\n" "DNS challenge mechanism, that is, you will not need a running web server or any\n" "port forwarding to your local machine." msgstr "" #: gnu/packages/certs.scm:123 msgid "Utility to split TLS certificates data into multiple PEM files" msgstr "" #: gnu/packages/certs.scm:124 msgid "" "This is a C version of the certdata2pem Python utility\n" "that was originally contributed to Debian." msgstr "" #: gnu/packages/certs.scm:184 msgid "CA certificates from Mozilla" msgstr "" #: gnu/packages/certs.scm:186 msgid "" "This package provides certificates for Certification Authorities (CA)\n" "taken from the NSS package and thus ultimately from the Mozilla project." msgstr "" #: gnu/packages/certs.scm:287 msgid "Let's Encrypt root and intermediate certificates" msgstr "" #: gnu/packages/certs.scm:288 msgid "" "This package provides a certificate store containing only the\n" "Let's Encrypt root and intermediate certificates. It is intended to be used\n" "within Guix." msgstr "" #: gnu/packages/compression.scm:156 msgid "Compression library" msgstr "کتابخانهٔ فشرده‌سازی" #: gnu/packages/compression.scm:158 msgid "" "zlib is designed to be a free, general-purpose, legally unencumbered --\n" "that is, not covered by any patents -- lossless data-compression library for\n" "use on virtually any computer hardware and operating system. The zlib data\n" "format is itself portable across platforms. Unlike the LZW compression method\n" "used in Unix compress(1) and in the GIF image format, the compression method\n" "currently used in zlib essentially never expands the data. (LZW can double or\n" "triple the file size in extreme cases.) zlib's memory footprint is also\n" "independent of the input data and can be reduced, if necessary, at some cost\n" "in compression." msgstr "" #: gnu/packages/compression.scm:208 msgid "Zip Compression library" msgstr "" #: gnu/packages/compression.scm:210 msgid "" "Minizip is a minimalistic library that supports compressing,\n" "extracting and viewing ZIP archives. This version is extracted from\n" "the @code{zlib} source." msgstr "" #: gnu/packages/compression.scm:229 msgid "Replacement for Sun's 'jar' utility" msgstr "" #: gnu/packages/compression.scm:231 msgid "" "FastJar is an attempt to create a much faster replacement for Sun's\n" "@code{jar} utility. Instead of being written in Java, FastJar is written in C." msgstr "" #: gnu/packages/compression.scm:258 msgid "C library for manipulating POSIX tar files" msgstr "" #: gnu/packages/compression.scm:260 msgid "" "libtar is a C library for manipulating POSIX tar files. It handles\n" "adding and extracting files to/from a tar archive." msgstr "" #: gnu/packages/compression.scm:277 msgid "General file (de)compression (using lzw)" msgstr "" #: gnu/packages/compression.scm:310 msgid "" "GNU Gzip provides data compression and decompression utilities; the\n" "typical extension is \".gz\". Unlike the \"zip\" format, it compresses a single\n" "file; as a result, it is often used in conjunction with \"tar\", resulting in\n" "\".tar.gz\" or \".tgz\", etc." msgstr "" #: gnu/packages/compression.scm:422 msgid "High-quality data compression program" msgstr "" #: gnu/packages/compression.scm:424 msgid "" "bzip2 is a freely available, patent free (see below), high-quality data\n" "compressor. It typically compresses files to within 10% to 15% of the best\n" "available techniques (the PPM family of statistical compressors), whilst\n" "being around twice as fast at compression and six times faster at\n" "decompression." msgstr "" #: gnu/packages/compression.scm:481 msgid "Parallel bzip2 compression utility" msgstr "" #: gnu/packages/compression.scm:483 msgid "" "lbzip2 is a multi-threaded compression utility with support for the\n" "bzip2 compressed file format. lbzip2 can process standard bz2 files in\n" "parallel. It uses POSIX threading model (pthreads), which allows it to take\n" "full advantage of symmetric multiprocessing (SMP) systems. It has been proven\n" "to scale linearly, even to over one hundred processor cores. lbzip2 is fully\n" "compatible with bzip2 – both at file format and command line level." msgstr "" #: gnu/packages/compression.scm:516 msgid "Parallel bzip2 implementation" msgstr "" #: gnu/packages/compression.scm:518 msgid "" "Pbzip2 is a parallel implementation of the bzip2 block-sorting file\n" "compressor that uses pthreads and achieves near-linear speedup on SMP machines.\n" "The output of this version is fully compatible with bzip2 v1.0.2 (i.e. anything\n" "compressed with pbzip2 can be decompressed with bzip2)." msgstr "" #: gnu/packages/compression.scm:560 msgid "General-purpose data compression" msgstr "" #: gnu/packages/compression.scm:562 msgid "" "XZ Utils is free general-purpose data compression software with high\n" "compression ratio. XZ Utils were written for POSIX-like systems, but also\n" "work on some not-so-POSIX systems. XZ Utils are the successor to LZMA Utils.\n" "\n" "The core of the XZ Utils compression code is based on LZMA SDK, but it has\n" "been modified quite a lot to be suitable for XZ Utils. The primary\n" "compression algorithm is currently LZMA2, which is used inside the .xz\n" "container format. With typical files, XZ Utils create 30 % smaller output\n" "than gzip and 15 % smaller output than bzip2." msgstr "" #: gnu/packages/compression.scm:598 msgid "LHA archive decompressor" msgstr "" #: gnu/packages/compression.scm:599 msgid "" "Lhasa is a replacement for the Unix LHA tool, for\n" "decompressing .lzh (LHA / LHarc) and .lzs (LArc) archives. The backend for the\n" "tool is a library, so that it can be reused for other purposes. Lhasa aims to\n" "be compatible with as many types of lzh/lzs archives as possible. It also aims\n" "to generate the same output as the (non-free) Unix LHA tool, so that it will\n" "act as a free drop-in replacement." msgstr "" #: gnu/packages/compression.scm:623 msgid "Data compression library suitable for real-time data de-/compression" msgstr "" #: gnu/packages/compression.scm:625 msgid "" "LZO is a data compression library which is suitable for data\n" "de-/compression in real-time. This means it favours speed over\n" "compression ratio.\n" "\n" "LZO is written in ANSI C. Both the source code and the compressed data\n" "format are designed to be portable across platforms." msgstr "" #: gnu/packages/compression.scm:648 msgid "Compress or expand files" msgstr "" #: gnu/packages/compression.scm:650 msgid "" "Lzop is a file compressor which is very similar to gzip. Lzop uses the\n" "LZO data compression library for compression services, and its main advantages\n" "over gzip are much higher compression and decompression speed (at the cost of\n" "some compression ratio)." msgstr "" #: gnu/packages/compression.scm:675 msgid "Lossless data compressor based on the LZMA algorithm" msgstr "" #: gnu/packages/compression.scm:677 msgid "" "Lzip is a lossless data compressor with a user interface similar to the\n" "one of gzip or bzip2. Lzip decompresses almost as fast as gzip and compresses\n" "more than bzip2, which makes it well-suited for software distribution and data\n" "archiving. Lzip is a clean implementation of the LZMA algorithm." msgstr "" #: gnu/packages/compression.scm:702 msgid "Recover and decompress data from damaged lzip files" msgstr "" #: gnu/packages/compression.scm:704 msgid "" "Lziprecover is a data recovery tool and decompressor for files in the lzip\n" "compressed data format (.lz). It can test the integrity of lzip files, extract\n" "data from damaged ones, and repair most files with small errors (up to one\n" "single-byte error per member) entirely.\n" "\n" "Lziprecover is not a replacement for regular backups, but a last line of defence\n" "when even the backups are corrupt. It can recover files by merging the good\n" "parts of two or more damaged copies, such as can be easily produced by running\n" "@command{ddrescue} on a failing device.\n" "\n" "This package also includes @command{unzcrash}, a tool to test the robustness of\n" "decompressors when faced with corrupted input." msgstr "" #: gnu/packages/compression.scm:765 msgid "Archives in shell scripts, uuencode/uudecode" msgstr "" #: gnu/packages/compression.scm:767 msgid "" "GNU sharutils is a package for creating and manipulating shell\n" "archives that can be readily emailed. A shell archive is a file that can be\n" "processed by a Bourne-type shell to unpack the original collection of files.\n" "This package is mostly for compatibility and historical interest." msgstr "" #: gnu/packages/compression.scm:799 msgid "Library for SoundFont decompression" msgstr "" #: gnu/packages/compression.scm:801 msgid "" "SfArkLib is a C++ library for decompressing SoundFont files compressed\n" "with the sfArk algorithm." msgstr "" #: gnu/packages/compression.scm:835 msgid "Basic sfArk decompressor" msgstr "" #: gnu/packages/compression.scm:836 msgid "" "SfArk extractor converts SoundFonts in the compressed legacy\n" "sfArk file format to the uncompressed sf2 format." msgstr "" #: gnu/packages/compression.scm:854 msgid "Compression tools for some formats used by Microsoft" msgstr "" #: gnu/packages/compression.scm:856 msgid "" "The purpose of libmspack is to provide both compression and\n" "decompression of some loosely related file formats used by Microsoft." msgstr "" #: gnu/packages/compression.scm:906 msgid "Compression algorithm focused on speed" msgstr "" #: gnu/packages/compression.scm:907 msgid "" "LZ4 is a lossless compression algorithm, providing\n" "compression speed at 400 MB/s per core (0.16 Bytes/cycle). It also features an\n" "extremely fast decoder, with speed in multiple GB/s per core (0.71 Bytes/cycle).\n" "A high compression derivative, called LZ4_HC, is also provided. It trades CPU\n" "time for compression ratio." msgstr "" #: gnu/packages/compression.scm:957 gnu/packages/compression.scm:1007 msgid "Tools to create and extract squashfs file systems" msgstr "" #: gnu/packages/compression.scm:959 msgid "" "Squashfs is a highly compressed read-only file system for Linux. It\n" "compresses files, inodes, and directories with one of several compressors.\n" "All blocks are packed to minimize the data overhead, and block sizes of\n" "between 4K and 1M are supported. It is intended to be used for archival use,\n" "for live media, and for embedded systems where low overhead is needed.\n" "This package allows you to create and extract such file systems." msgstr "" #: gnu/packages/compression.scm:1009 msgid "" "Squashfs is a highly compressed read-only file system for Linux. It\n" "compresses files, inodes, and directories with one of several compressors.\n" "All blocks are packed to minimize the data overhead, and block sizes of\n" "between 4K and 1M are supported. It is intended to be used for archival use,\n" "for live media, and for embedded systems where low overhead is needed.\n" "\n" "The squashfs-tools-ng package offers alternative tooling to create and extract\n" "such file systems. It is not based on the older squashfs-tools package and\n" "its tools have different names:\n" "\n" "@enumerate\n" "@item @command{gensquashfs} produces SquashFS images from a directory or\n" "@command{gen_init_cpio}-like file listings and can generate SELinux labels.\n" "@item @command{rdsquashfs} inspects and unpacks SquashFS images.\n" "@item @command{sqfs2tar} and @command{tar2sqfs} convert between SquashFS and\n" "tarballs.\n" "@item @command{sqfsdiff} compares the contents of two SquashFS images.\n" "@end enumerate\n" "\n" "These commands are largely command-line wrappers around the included\n" "@code{libsquashfs} library that intends to make SquashFS available to other\n" "applications as an embeddable, extensible archive format.\n" "\n" "Both the library and tools operate deterministically: same input will produce\n" "byte-for-byte identical output." msgstr "" #: gnu/packages/compression.scm:1066 msgid "Parallel implementation of gzip" msgstr "" #: gnu/packages/compression.scm:1068 msgid "" "This package provides a parallel implementation of gzip that exploits\n" "multiple processors and multiple cores when compressing data." msgstr "" #: gnu/packages/compression.scm:1091 msgid "Parallel indexing implementation of LZMA" msgstr "" #: gnu/packages/compression.scm:1093 msgid "" "The existing XZ Utils provide great compression in the .xz file format,\n" "but they produce just one big block of compressed data. Pixz instead produces\n" "a collection of smaller blocks which makes random access to the original data\n" "possible and can compress in parallel. This is especially useful for large\n" "tarballs." msgstr "" #: gnu/packages/compression.scm:1139 msgid "Tool to unpack Cabinet archives" msgstr "" #: gnu/packages/compression.scm:1140 msgid "Extracts files out of Microsoft Cabinet (.cab) archives" msgstr "" #: gnu/packages/compression.scm:1169 msgid "Library for reading and writing Jcat files" msgstr "" #: gnu/packages/compression.scm:1171 msgid "" "This library allows reading and writing gzip-compressed JSON catalog\n" "files, which can be used to store GPG, PKCS-7 and SHA-256 checksums for each\n" "file." msgstr "" #: gnu/packages/compression.scm:1204 msgid "Delta encoder for binary files" msgstr "" #: gnu/packages/compression.scm:1205 msgid "" "xdelta encodes only the differences between two binary files\n" "using the VCDIFF algorithm and patch file format described in RFC 3284. It can\n" "also be used to apply such patches. xdelta is similar to @command{diff} and\n" "@command{patch}, but is not limited to plain text and does not generate\n" "human-readable output." msgstr "" #: gnu/packages/compression.scm:1234 msgid "Large file compressor with a very high compression ratio" msgstr "" #: gnu/packages/compression.scm:1235 msgid "" "lrzip is a compression utility that uses long-range\n" "redundancy reduction to improve the subsequent compression ratio of\n" "larger files. It can then further compress the result with the ZPAQ or\n" "LZMA algorithms for maximum compression, or LZO for maximum speed. This\n" "choice between size or speed allows for either better compression than\n" "even LZMA can provide, or a higher speed than gzip while compressing as\n" "well as bzip2." msgstr "" #: gnu/packages/compression.scm:1288 msgid "Fast compressor/decompressor" msgstr "" #: gnu/packages/compression.scm:1289 msgid "" "Snappy is a compression/decompression library. It does not\n" "aim for maximum compression, or compatibility with any other compression library;\n" "instead, it aims for very high speeds and reasonable compression. For instance,\n" "compared to the fastest mode of zlib, Snappy is an order of magnitude faster\n" "for most inputs, but the resulting compressed files are anywhere from 20% to\n" "100% bigger." msgstr "" #: gnu/packages/compression.scm:1404 msgid "Command-line file archiver with high compression ratio" msgstr "" #: gnu/packages/compression.scm:1405 msgid "" "p7zip is a command-line port of 7-Zip, a file archiver that\n" "handles the 7z format which features very high compression ratios." msgstr "" #: gnu/packages/compression.scm:1452 msgid "Compressed C++ iostream" msgstr "" #: gnu/packages/compression.scm:1453 msgid "" "gzstream is a small library for providing zlib\n" "functionality in a C++ iostream." msgstr "" #: gnu/packages/compression.scm:1475 msgid "Very good, but slow, deflate or zlib compression" msgstr "" #: gnu/packages/compression.scm:1476 msgid "" "Zopfli Compression Algorithm is a compression library\n" "programmed in C to perform very good, but slow, deflate or zlib compression.\n" "ZopfliCompress supports the deflate, gzip and zlib output formats. This\n" "library can only compress, not decompress; existing zlib or deflate libraries\n" "can decompress the data." msgstr "" #: gnu/packages/compression.scm:1528 msgid "Incremental journaling archiver" msgstr "" #: gnu/packages/compression.scm:1529 msgid "" "ZPAQ is a command-line archiver for realistic situations with\n" "many duplicate and already compressed files. It backs up only those files\n" "modified since the last update. All previous versions remain untouched and can\n" "be independently recovered. Identical files are only stored once (known as\n" "@dfn{de-duplication}). Archives can also be encrypted.\n" "\n" "ZPAQ is intended to back up user data, not entire operating systems. It ignores\n" "owner and group IDs, ACLs, extended attributes, or special file types like\n" "devices, sockets, or named pipes. It does not follow or restore symbolic links\n" "or junctions, and always follows hard links." msgstr "" #: gnu/packages/compression.scm:1629 msgid "Extract CAB files from InstallShield installers" msgstr "" #: gnu/packages/compression.scm:1631 msgid "" "@command{unshield} is a tool and library for extracting @file{.cab}\n" " archives from InstallShield installers." msgstr "" #: gnu/packages/compression.scm:1709 msgid "Zstandard real-time compression algorithm" msgstr "" #: gnu/packages/compression.scm:1710 msgid "" "Zstandard (@command{zstd}) is a lossless compression algorithm\n" "that combines very fast operation with a compression ratio comparable to that of\n" "zlib. In most scenarios, both compression and decompression can be performed in\n" "‘real time’. The compressor can be configured to provide the most suitable\n" "trade-off between compression ratio and speed, without affecting decompression\n" "speed." msgstr "" #: gnu/packages/compression.scm:1757 msgid "Threaded implementation of the Zstandard compression algorithm" msgstr "" #: gnu/packages/compression.scm:1758 msgid "" "Parallel Zstandard (PZstandard or @command{pzstd}) is a\n" "multi-threaded implementation of the @uref{http://zstd.net/, Zstandard\n" "compression algorithm}. It is fully compatible with the original Zstandard file\n" "format and command-line interface, and can be used as a drop-in replacement.\n" "\n" "Compression is distributed over multiple processor cores to improve performance,\n" "as is the decompression of data compressed in this manner. Data compressed by\n" "other implementations will only be decompressed by two threads: one performing\n" "the actual decompression, the other input and output." msgstr "" #: gnu/packages/compression.scm:1796 msgid "Compression and file packing utility" msgstr "" #: gnu/packages/compression.scm:1798 msgid "" "Zip is a compression and file packaging/archive utility. Zip is useful\n" "for packaging a set of files for distribution, for archiving files, and for\n" "saving disk space by temporarily compressing unused files or directories.\n" "Zip puts one or more compressed files into a single ZIP archive, along with\n" "information about the files (name, path, date, time of last modification,\n" "protection, and check information to verify file integrity). An entire\n" "directory structure can be packed into a ZIP archive with a single command.\n" "\n" "Zip has one compression method (deflation) and can also store files without\n" "compression. Zip automatically chooses the better of the two for each file.\n" "Compression ratios of 2:1 to 3:1 are common for text files." msgstr "" #: gnu/packages/compression.scm:1894 msgid "Decompression and file extraction utility" msgstr "" #: gnu/packages/compression.scm:1896 msgid "" "UnZip is an extraction utility for archives compressed in .zip format,\n" "also called \"zipfiles\".\n" "\n" "UnZip lists, tests, or extracts files from a .zip archive. The default\n" "behaviour (with no options) is to extract into the current directory, and\n" "subdirectories below it, all files from the specified zipfile. UnZip\n" "recreates the stored directory structure by default." msgstr "" #: gnu/packages/compression.scm:1956 msgid "Normalize @file{.zip} archive header timestamps" msgstr "" #: gnu/packages/compression.scm:1958 msgid "" "Ziptime helps make @file{.zip} archives reproducible by replacing\n" "timestamps in the file header with a fixed time (1 January 2008).\n" "\n" "``Extra fields'' are not changed, so you'll need to use the @code{-X} option to\n" "@command{zip} to prevent it from storing the ``universal time'' field." msgstr "" #: gnu/packages/compression.scm:1983 msgid "Library for accessing zip files" msgstr "" #: gnu/packages/compression.scm:1985 msgid "ZZipLib is a library based on zlib for accessing zip files." msgstr "" #: gnu/packages/compression.scm:2008 msgid "C library for reading, creating, and modifying zip archives" msgstr "" #: gnu/packages/compression.scm:2009 msgid "" "Libzip is a C library for reading, creating, and modifying\n" "zip archives. Files can be added from data buffers, files, or compressed data\n" "copied directly from other zip archives. Changes made without closing the\n" "archive can be reverted." msgstr "" #: gnu/packages/compression.scm:2041 msgid "Universal tool to manage file archives of various types" msgstr "" #: gnu/packages/compression.scm:2042 msgid "" "The main command is @command{aunpack} which extracts files\n" "from an archive. The other commands provided are @command{apack} (to create\n" "archives), @command{als} (to list files in archives), and @command{acat} (to\n" "extract files to standard out). As @command{atool} invokes external programs\n" "to handle the archives, not all commands may be supported for a certain type\n" "of archives." msgstr "" #: gnu/packages/compression.scm:2066 msgid "Small, stand-alone lzip decompressor" msgstr "" #: gnu/packages/compression.scm:2068 msgid "" "Lunzip is a decompressor for files in the lzip compression format (.lz),\n" "written as a single small C tool with no dependencies. This makes it\n" "well-suited to embedded and other systems without a C++ compiler, or for use in\n" "applications such as software installers that need only to decompress files,\n" "not compress them.\n" "Lunzip is intended to be fully compatible with the regular lzip package." msgstr "" #: gnu/packages/compression.scm:2093 msgid "Small, stand-alone lzip compressor and decompressor" msgstr "" #: gnu/packages/compression.scm:2095 msgid "" "Clzip is a compressor and decompressor for files in the lzip compression\n" "format (.lz), written as a single small C tool with no dependencies. This makes\n" "it well-suited to embedded and other systems without a C++ compiler, or for use\n" "in other applications like package managers.\n" "Clzip is intended to be fully compatible with the regular lzip package." msgstr "" #: gnu/packages/compression.scm:2121 msgid "Lzip data compression C library" msgstr "" #: gnu/packages/compression.scm:2123 msgid "" "Lzlib is a C library for in-memory LZMA compression and decompression in\n" "the lzip format. It supports integrity checking of the decompressed data, and\n" "all functions are thread-safe. The library should never crash, even in case of\n" "corrupted input." msgstr "" #: gnu/packages/compression.scm:2145 msgid "Parallel lossless data compressor for the lzip format" msgstr "" #: gnu/packages/compression.scm:2147 msgid "" "Plzip is a massively parallel (multi-threaded) lossless data compressor\n" "and decompressor that uses the lzip file format (.lz). Files produced by plzip\n" "are fully compatible with lzip and can be rescued with lziprecover.\n" "On multiprocessor machines, plzip can compress and decompress large files much\n" "faster than lzip, at the cost of a slightly reduced compression ratio (0.4% to\n" "2%). The number of usable threads is limited by file size: on files of only a\n" "few MiB, plzip is no faster than lzip.\n" "Files that were compressed with regular lzip will also not be decompressed\n" "faster by plzip, unless the @code{-b} option was used: lzip usually produces\n" "single-member files which can't be decompressed in parallel." msgstr "" #: gnu/packages/compression.scm:2178 msgid "Tool for extracting Inno Setup installers" msgstr "" #: gnu/packages/compression.scm:2179 msgid "" "innoextract allows extracting Inno Setup installers under\n" "non-Windows systems without running the actual installer using wine." msgstr "" #: gnu/packages/compression.scm:2200 msgid "Intelligent storage acceleration library" msgstr "" #: gnu/packages/compression.scm:2201 msgid "" "ISA-L is a collection of optimized low-level functions\n" "targeting storage applications. ISA-L includes:\n" "\n" "@itemize\n" "@item Erasure codes: fast block Reed-Solomon type erasure codes for any\n" " encode/decode matrix;\n" "@item CRC: fast implementations of cyclic redundancy check. Six different\n" " polynomials supported: iscsi32, ieee32, t10dif, ecma64, iso64, jones64;\n" "@item Raid: calculate and operate on XOR and P+Q parity found in common RAID\n" " implementations;\n" "@item Compression: fast deflate-compatible data compression;\n" "@item De-compression: fast inflate-compatible data compression;\n" "@item igzip: command line application like gzip, accelerated with ISA-L.\n" "@end itemize\n" msgstr "" #: gnu/packages/compression.scm:2260 msgid "General-purpose lossless compression" msgstr "" #: gnu/packages/compression.scm:2261 msgid "" "This package provides the reference implementation of Brotli,\n" "a generic-purpose lossless compression algorithm that compresses data using a\n" "combination of a modern variant of the LZ77 algorithm, Huffman coding and 2nd\n" "order context modeling, with a compression ratio comparable to the best\n" "currently available general-purpose compression methods. It is similar in speed\n" "with @code{deflate} but offers more dense compression.\n" "\n" "The specification of the Brotli Compressed Data Format is defined in RFC 7932." msgstr "" #: gnu/packages/compression.scm:2280 msgid "Python interface to Brotli" msgstr "" #: gnu/packages/compression.scm:2281 msgid "" "This package provides a Python interface to the @code{brotli}\n" "package, an implementation of the Brotli lossless compression algorithm." msgstr "" #: gnu/packages/compression.scm:2317 msgid "Portable lossless data compression library" msgstr "" #: gnu/packages/compression.scm:2318 msgid "" "UCL implements a number of compression algorithms that\n" "achieve an excellent compression ratio while allowing fast decompression.\n" "Decompression requires no additional memory.\n" "\n" "Compared to LZO, the UCL algorithms achieve a better compression ratio but\n" "decompression is a little bit slower." msgstr "" #: gnu/packages/compression.scm:2340 msgid "Compression tool for executables" msgstr "" #: gnu/packages/compression.scm:2342 msgid "" "The Ultimate Packer for eXecutables (UPX) is an executable file\n" "compressor. UPX typically reduces the file size of programs and shared\n" "libraries by around 50%--70%, thus reducing disk space, network load times,\n" "download times, and other distribution and storage costs." msgstr "" #: gnu/packages/compression.scm:2369 msgid "Qt/C++ wrapper for Minizip" msgstr "" #: gnu/packages/compression.scm:2370 msgid "" "QuaZIP is a simple C++ wrapper over Gilles Vollant's\n" "ZIP/UNZIP package that can be used to access ZIP archives. It uses\n" "Trolltech's Qt toolkit.\n" "\n" "QuaZIP allows you to access files inside ZIP archives using QIODevice\n" "API, and that means that you can also use QTextStream, QDataStream or\n" "whatever you would like to use on your zipped files.\n" "\n" "QuaZIP provides complete abstraction of the ZIP/UNZIP API, for both\n" "reading from and writing to ZIP archives." msgstr "" #: gnu/packages/compression.scm:2428 msgid "Compressed file format for efficient deltas" msgstr "" #: gnu/packages/compression.scm:2429 msgid "" "The zchunk compressed file format allows splitting a file\n" "into independent chunks. This makes it possible to retrieve only changed\n" "chunks when downloading a new version of the file, and also makes zchunk files\n" "efficient over rsync. Along with the library, this package provides the\n" "following utilities:\n" "@table @command\n" "@item unzck\n" "To decompress a zchunk file.\n" "@item zck\n" "To compress a new zchunk file, or re-compress an existing one.\n" "@item zck_delta_size\n" "To calculate the difference between two zchunk files.\n" "@item zck_gen_zdict\n" "To create a dictionary for a zchunk file.\n" "@item zck_read_header\n" "To read a zchunk header.\n" "@item zckdl\n" "To download a zchunk file.\n" "@end table" msgstr "" #: gnu/packages/compression.scm:2483 msgid "Utilities that transparently operate on compressed files" msgstr "" #: gnu/packages/compression.scm:2485 msgid "" "Zutils is a collection of utilities able to process any combination of\n" "compressed and uncompressed files transparently. If any given file, including\n" "standard input, is compressed, its decompressed content is used instead.\n" "\n" "@command{zcat}, @command{zcmp}, @command{zdiff}, and @command{zgrep} are\n" "improved replacements for the shell scripts provided by GNU gzip.\n" "@command{ztest} tests the integrity of supported compressed files.\n" "@command{zupdate} recompresses files with lzip, similar to gzip's\n" "@command{znew}.\n" "\n" "Supported compression formats are bzip2, gzip, lzip, and xz. Zutils uses\n" "external compressors: the compressor to be used for each format is configurable\n" "at run time, and must be installed separately." msgstr "" #: gnu/packages/compression.scm:2542 msgid "Extract makeself and mojo archives without running untrusted code" msgstr "" #: gnu/packages/compression.scm:2543 msgid "" "This package provides a script to unpack self-extracting\n" "archives generated by @command{makeself} or @command{mojo} without running the\n" "possibly untrusted extraction shell script." msgstr "" #: gnu/packages/compression.scm:2570 msgid "Original Lempel-Ziv compress/uncompress programs" msgstr "" #: gnu/packages/compression.scm:2571 msgid "" "(N)compress provides the original compress and uncompress\n" "programs that used to be the de facto UNIX standard for compressing and\n" "uncompressing files. These programs implement a fast, simple Lempel-Ziv (LZW)\n" "file compression algorithm." msgstr "" #: gnu/packages/compression.scm:2597 msgid "Graphical front-end for archive operations" msgstr "" #: gnu/packages/compression.scm:2598 msgid "" "Xarchiver is a front-end to various command line archiving\n" "tools. It uses GTK+ tool-kit and is designed to be desktop-environment\n" "independent. Supported formats are 7z, ARJ, bzip2, gzip, LHA, lzma, lzop,\n" "RAR, RPM, DEB, tar, and ZIP. It cannot perform functions for archives, whose\n" "archiver is not installed." msgstr "" #: gnu/packages/compression.scm:2633 msgid "Multithreaded tar utility" msgstr "" #: gnu/packages/compression.scm:2635 msgid "" "Archive huge numbers of files, or split massive tar archives into smaller\n" "chunks." msgstr "" #: gnu/packages/compression.scm:2667 msgid "Blocking, shuffling and lossless compression library" msgstr "" #: gnu/packages/compression.scm:2669 msgid "" "Blosc is a high performance compressor optimized for binary data. It has\n" "been designed to transmit data to the processor cache faster than the\n" "traditional, non-compressed, direct memory fetch approach via a\n" "@code{memcpy()} system call. Blosc is meant not only to reduce the size of\n" "large datasets on-disk or in-memory, but also to accelerate memory-bound\n" "computations." msgstr "" #: gnu/packages/compression.scm:2706 msgid "Error code modeler" msgstr "" #: gnu/packages/compression.scm:2707 msgid "" "ECM is a utility that converts ECM files, i.e., CD data files\n" "with their error correction data losslessly rearranged for better compression,\n" "to their original, binary CD format." msgstr "" #: gnu/packages/compression.scm:2737 msgid "Library for DEFLATE/zlib/gzip compression and decompression" msgstr "" #: gnu/packages/compression.scm:2738 msgid "" "Libdeflate is a library for fast, whole-buffer DEFLATE-based\n" "compression and decompression. The supported formats are:\n" "\n" "@enumerate\n" "@item DEFLATE (raw)\n" "@item zlib (a.k.a. DEFLATE with a zlib wrapper)\n" "@item gzip (a.k.a. DEFLATE with a gzip wrapper)\n" "@end enumerate\n" msgstr "" #: gnu/packages/compression.scm:2766 msgid "Combination of the tar archiver and the lzip compressor" msgstr "" #: gnu/packages/compression.scm:2768 msgid "" "Tarlz is a massively parallel (multi-threaded) combined implementation of\n" "the tar archiver and the lzip compressor. Tarlz creates, lists, and extracts\n" "archives in a simplified and safer variant of the POSIX pax format compressed\n" "with lzip, keeping the alignment between tar members and lzip members. The\n" "resulting multimember tar.lz archive is fully backward compatible with standard\n" "tar tools like GNU tar, which treat it like any other tar.lz archive. Tarlz\n" "can append files to the end of such compressed archives." msgstr "" #: gnu/packages/compression.scm:2800 msgid "The C library for parsing and generating CBOR" msgstr "" #: gnu/packages/compression.scm:2802 msgid "" "@acronym{CBOR, The Concise Binary Object Representation} is a data format\n" "whose design goals include the possibility of extremely small code size, fairly\n" "small message size, and extensibility without the need for version\n" "negotiation. These design goals make it different from earlier binary\n" "serializations such as ASN.1 and MessagePack." msgstr "" #: gnu/packages/compression.scm:2825 msgid "LZFSE compression library and command line tool" msgstr "" #: gnu/packages/compression.scm:2826 msgid "" "LZFSE is a Lempel-Ziv style data compression algorithm using\n" "Finite State Entropy coding. It targets similar compression rates at higher\n" "compression and decompression speed compared to Deflate using Zlib." msgstr "" #: gnu/packages/compression.scm:2855 msgid "Zip password cracker" msgstr "" #: gnu/packages/compression.scm:2856 msgid "Fcrackzip is a Zip file password cracker." msgstr "" #: gnu/packages/compression.scm:2880 msgid "Extract files from RAR archives" msgstr "" #: gnu/packages/compression.scm:2882 msgid "" "@code{unrar-free} is a free software version of the non-free @code{unrar}\n" "utility. This program is a simple command-line front-end to libarchive, and can\n" "list and extract not only RAR archives but also other formats supported by\n" "libarchive. It does not rival the non-free @code{unrar} in terms of features,\n" "but special care has been taken to ensure it meets most user's needs." msgstr "" #: gnu/packages/databases.scm:224 msgid "Run temporary PostgreSQL databases" msgstr "" #: gnu/packages/databases.scm:226 msgid "" "@code{pg_tmp} creates temporary PostgreSQL databases, suitable for tasks\n" "like running software test suites. Temporary databases created with\n" "@code{pg_tmp} have a limited shared memory footprint and are automatically\n" "garbage-collected after a configurable number of seconds (the default is\n" "60)." msgstr "" #: gnu/packages/databases.scm:250 msgid "Utility for dumping and restoring ElasticSearch indexes" msgstr "" #: gnu/packages/databases.scm:252 msgid "" "This package provides a utility for dumping the contents of an\n" "ElasticSearch index to a compressed file and restoring the dumpfile back to an\n" "ElasticSearch server" msgstr "" #: gnu/packages/databases.scm:408 msgid "Relational database with many ANSI SQL standard features" msgstr "" #: gnu/packages/databases.scm:410 msgid "" "Firebird is an SQL @acronym{RDBMS, relational database management system}\n" "with rich support for ANSI SQL (e.g., @code{INSERT...RETURNING}) including\n" "@acronym{UDFs, user-defined functions} and PSQL stored procedures, cursors, and\n" "triggers. Transactions provide full ACID-compliant referential integrity.\n" "\n" "The database requires very little manual maintenance once set up, making it\n" "ideal for small business or embedded use.\n" "\n" "When installed as a traditional local or remote (network) database server,\n" "Firebird can grow to terabyte scale with proper tuning---although PostgreSQL\n" "may be a better choice for such very large environments.\n" "\n" "Firebird can also be embedded into stand-alone applications that don't want or\n" "need a full client & server. Used in this manner, it offers richer SQL support\n" "than SQLite as well as the option to seamlessly migrate to a client/server\n" "database later." msgstr "" #: gnu/packages/databases.scm:479 msgid "Fast key-value storage library" msgstr "" #: gnu/packages/databases.scm:481 msgid "" "LevelDB is a fast key-value storage library that provides an ordered\n" "mapping from string keys to string values." msgstr "" #: gnu/packages/databases.scm:500 msgid "In-memory caching service" msgstr "" #: gnu/packages/databases.scm:501 msgid "" "Memcached is an in-memory key-value store. It has a small\n" "and generic API, and was originally intended for use with dynamic web\n" "applications." msgstr "" #: gnu/packages/databases.scm:562 msgid "C++ library for memcached" msgstr "" #: gnu/packages/databases.scm:563 msgid "" "libMemcached is a library to use memcached in C/C++\n" "applications. It comes with a complete reference guide and documentation of\n" "the API, and provides features such as:\n" "@itemize\n" "@item Asynchronous and synchronous transport support\n" "@item Consistent hashing and distribution\n" "@item Tunable hashing algorithm to match keys\n" "@item Access to large object support\n" "@item Local replication\n" "@end itemize" msgstr "" #: gnu/packages/databases.scm:598 msgid "Python client for memcached" msgstr "" #: gnu/packages/databases.scm:600 msgid "" "@code{pylibmc} is a client in Python for memcached. It is a wrapper\n" "around TangentOrg’s libmemcached library, and can be used as a drop-in\n" "replacement for the code@{python-memcached} library." msgstr "" #: gnu/packages/databases.scm:630 msgid "Memcache client library in Go" msgstr "" #: gnu/packages/databases.scm:632 msgid "This is a memcache client library for the Go programming language." msgstr "" #: gnu/packages/databases.scm:653 msgid "Memcached binary protocol toolkit for go" msgstr "" #: gnu/packages/databases.scm:655 msgid "This package provides memcache client and server functionality." msgstr "" #: gnu/packages/databases.scm:679 msgid "CLI for SQLite databases" msgstr "" #: gnu/packages/databases.scm:681 msgid "" "@code{litecli} is a command-line client for SQLite databases that has\n" "auto-completion and syntax highlighting." msgstr "" #: gnu/packages/databases.scm:700 msgid "Python implementation of PostgreSQL meta commands (backslash commands)" msgstr "" #: gnu/packages/databases.scm:702 msgid "" "This Python package provides an API to execute meta-commands (AKA\n" "\"special\", or \"backslash commands\") on PostgreSQL." msgstr "" #: gnu/packages/databases.scm:731 msgid "Persistent dict backed up by sqlite3 and pickle" msgstr "" #: gnu/packages/databases.scm:733 msgid "" "This package provides a lightweight wrapper around the sqlite3 database\n" "with a simple, Pythonic @code{dict}-like interface and support for\n" "multi-thread access." msgstr "" #: gnu/packages/databases.scm:763 msgid "PostgreSQL CLI with autocompletion and syntax highlighting" msgstr "" #: gnu/packages/databases.scm:765 msgid "" "@code{pgcli} is a command line interface for PostgreSQL with\n" "autocompletion and syntax highlighting." msgstr "" #: gnu/packages/databases.scm:795 msgid "Terminal Client for MySQL with AutoCompletion and Syntax Highlighting" msgstr "" #: gnu/packages/databases.scm:797 msgid "" "MyCLI is a command line interface for MySQL, MariaDB, and Percona with\n" "auto-completion and syntax highlighting." msgstr "" #: gnu/packages/databases.scm:892 msgid "Fast, easy to use, and popular database" msgstr "" #: gnu/packages/databases.scm:894 msgid "" "MySQL is a fast, reliable, and easy to use relational database\n" "management system that supports the standardized Structured Query\n" "Language." msgstr "" #: gnu/packages/databases.scm:1169 msgid "SQL database server" msgstr "" #: gnu/packages/databases.scm:1171 msgid "" "MariaDB is a multi-user and multi-threaded SQL database server, designed\n" "as a drop-in replacement of MySQL." msgstr "" #: gnu/packages/databases.scm:1195 msgid "Client library to connect to MySQL or MariaDB" msgstr "" #: gnu/packages/databases.scm:1196 msgid "" "The MariaDB Connector/C is used to connect applications\n" "developed in C/C++ to MariaDB and MySQL databases." msgstr "" #: gnu/packages/databases.scm:1217 msgid "Extension to the MariaDB database server" msgstr "" #: gnu/packages/databases.scm:1219 msgid "" "Galera is a wsrep-provider that is used with MariaDB for load-balancing\n" "and high-availability (HA)." msgstr "" #: gnu/packages/databases.scm:1276 msgid "Powerful object-relational database system" msgstr "" #: gnu/packages/databases.scm:1278 msgid "" "PostgreSQL is a powerful object-relational database system. It is fully\n" "ACID compliant, has full support for foreign keys, joins, views, triggers, and\n" "stored procedures (in multiple languages). It includes most SQL:2008 data\n" "types, including INTEGER, NUMERIC, BOOLEAN, CHAR, VARCHAR, DATE, INTERVAL, and\n" "TIMESTAMP. It also supports storage of binary large objects, including\n" "pictures, sounds, or video." msgstr "" #: gnu/packages/databases.scm:1442 msgid "Time-series extension for PostgreSQL" msgstr "" #: gnu/packages/databases.scm:1444 msgid "" "TimescaleDB is a database designed to make SQL scalable for\n" "time-series data. It is engineered up from PostgreSQL and packaged as a\n" "PostgreSQL extension, providing automatic partitioning across time and space\n" "(partitioning key), as well as full SQL support." msgstr "" #: gnu/packages/databases.scm:1523 msgid "Tool to migrate data to PostgreSQL" msgstr "" #: gnu/packages/databases.scm:1525 msgid "" "@code{pgloader} is a program that can load data or migrate databases from\n" "CSV, DB3, iXF, SQLite, MS-SQL or MySQL to PostgreSQL." msgstr "" #: gnu/packages/databases.scm:1545 msgid "Pure-Python MySQL driver" msgstr "" #: gnu/packages/databases.scm:1547 msgid "" "PyMySQL is a pure-Python MySQL client library, based on PEP 249.\n" "Most public APIs are compatible with @command{mysqlclient} and MySQLdb." msgstr "" #: gnu/packages/databases.scm:1570 msgid "Key-value database" msgstr "" #: gnu/packages/databases.scm:1571 msgid "" "QDBM is a library of routines for managing a\n" "database. The database is a simple data file containing key-value\n" "pairs. Every key and value is serial bytes with variable length.\n" "Binary data as well as character strings can be used as a key or a\n" "value. There is no concept of data tables or data types. Records are\n" "organized in a hash table or B+ tree." msgstr "" #: gnu/packages/databases.scm:1609 msgid "Manipulate plain text files as databases" msgstr "" #: gnu/packages/databases.scm:1611 msgid "" "GNU Recutils is a set of tools and libraries for creating and\n" "manipulating text-based, human-editable databases. Despite being text-based,\n" "databases created with Recutils carry all of the expected features such as\n" "unique fields, primary keys, time stamps and more. Many different field\n" "types are supported, as is encryption." msgstr "" #: gnu/packages/databases.scm:1649 msgid "Emacs mode for working with recutils database files" msgstr "" #: gnu/packages/databases.scm:1650 msgid "" "This package provides an Emacs major mode @code{rec-mode}\n" "for working with GNU Recutils text-based, human-editable databases. It\n" "supports editing, navigation, and querying of recutils database files\n" "including field and record folding." msgstr "" #: gnu/packages/databases.scm:1716 msgid "Persistent key-value store for fast storage" msgstr "" #: gnu/packages/databases.scm:1718 msgid "" "RocksDB is a library that forms the core building block for a fast\n" "key-value server, especially suited for storing data on flash drives. It\n" "has a @dfn{Log-Structured-Merge-Database} (LSM) design with flexible tradeoffs\n" "between @dfn{Write-Amplification-Factor} (WAF), @dfn{Read-Amplification-Factor}\n" "(RAF) and @dfn{Space-Amplification-Factor} (SAF). It has multi-threaded\n" "compactions, making it specially suitable for storing multiple terabytes of\n" "data in a single database. RocksDB is partially based on @code{LevelDB}." msgstr "" #: gnu/packages/databases.scm:1775 msgid "Command-line tool for accessing SPARQL endpoints over HTTP" msgstr "" #: gnu/packages/databases.scm:1776 msgid "" "Sparql-query is a command-line tool for accessing SPARQL\n" "endpoints over HTTP. It has been intentionally designed to @code{feel} similar to\n" "tools for interrogating SQL databases. For example, you can enter a query over\n" "several lines, using a semi-colon at the end of a line to indicate the end of\n" "your query. It also supports readline so that you can more easily recall and\n" "edit previous queries, even across sessions. It can be used non-interactively,\n" "for example from a shell script." msgstr "" #: gnu/packages/databases.scm:1867 msgid "Database change management tool" msgstr "" #: gnu/packages/databases.scm:1869 msgid "" "Sqitch is a standalone change management system for database schemas,\n" "which uses SQL to describe changes." msgstr "" #: gnu/packages/databases.scm:1894 msgid "Text console-based database viewer and editor" msgstr "" #: gnu/packages/databases.scm:1896 msgid "" "SQLcrush lets you view and edit a database directly from the text\n" "console through an ncurses interface. You can explore each table's structure,\n" "browse and edit the contents, add and delete entries, all while tracking your\n" "changes." msgstr "" #: gnu/packages/databases.scm:1932 msgid "Trivial database" msgstr "" #: gnu/packages/databases.scm:1934 msgid "" "TDB is a Trivial Database. In concept, it is very much like GDBM,\n" "and BSD's DB except that it allows multiple simultaneous writers and uses\n" "locking internally to keep writers from trampling on each other. TDB is also\n" "extremely small." msgstr "" #: gnu/packages/databases.scm:1953 msgid "Database independent interface for Perl" msgstr "" #: gnu/packages/databases.scm:1954 msgid "This package provides a database interface for Perl." msgstr "" #: gnu/packages/databases.scm:2001 msgid "Extensible and flexible object <-> relational mapper" msgstr "" #: gnu/packages/databases.scm:2002 msgid "" "An SQL to OO mapper with an object API inspired by\n" "Class::DBI (with a compatibility layer as a springboard for porting) and a\n" "resultset API that allows abstract encapsulation of database operations. It\n" "aims to make representing queries in your code as perl-ish as possible while\n" "still providing access to as many of the capabilities of the database as\n" "possible, including retrieving related records from multiple tables in a\n" "single query, \"JOIN\", \"LEFT JOIN\", \"COUNT\", \"DISTINCT\", \"GROUP BY\",\n" "\"ORDER BY\" and \"HAVING\" support." msgstr "" #: gnu/packages/databases.scm:2030 msgid "Cursor with built-in caching support" msgstr "" #: gnu/packages/databases.scm:2031 msgid "" "DBIx::Class::Cursor::Cached provides a cursor class with\n" "built-in caching support." msgstr "" #: gnu/packages/databases.scm:2053 msgid "Introspect many-to-many relationships" msgstr "" #: gnu/packages/databases.scm:2054 msgid "" "Because the many-to-many relationships are not real\n" "relationships, they can not be introspected with DBIx::Class. Many-to-many\n" "relationships are actually just a collection of convenience methods installed\n" "to bridge two relationships. This DBIx::Class component can be used to store\n" "all relevant information about these non-relationships so they can later be\n" "introspected and examined." msgstr "" #: gnu/packages/databases.scm:2112 msgid "Create a DBIx::Class::Schema based on a database" msgstr "" #: gnu/packages/databases.scm:2113 msgid "" "DBIx::Class::Schema::Loader automates the definition of a\n" "DBIx::Class::Schema by scanning database table definitions and setting up the\n" "columns, primary keys, unique constraints and relationships." msgstr "" #: gnu/packages/databases.scm:2136 msgid "DBI PostgreSQL interface" msgstr "" #: gnu/packages/databases.scm:2137 msgid "" "This package provides a PostgreSQL driver for the Perl5\n" "@dfn{Database Interface} (DBI)." msgstr "" #: gnu/packages/databases.scm:2174 msgid "DBI MySQL interface" msgstr "" #: gnu/packages/databases.scm:2175 msgid "" "This package provides a MySQL driver for the Perl5\n" "@dfn{Database Interface} (DBI)." msgstr "" #: gnu/packages/databases.scm:2194 msgid "SQlite interface for Perl" msgstr "" #: gnu/packages/databases.scm:2195 msgid "" "DBD::SQLite is a Perl DBI driver for SQLite, that includes\n" "the entire thing in the distribution. So in order to get a fast transaction\n" "capable RDBMS working for your Perl project you simply have to install this\n" "module, and nothing else." msgstr "" #: gnu/packages/databases.scm:2218 #, scheme-format msgid "Parse and utilize MySQL's /etc/my.cnf and ~/.my.cnf files" msgstr "" #: gnu/packages/databases.scm:2220 msgid "" "@code{MySQL::Config} emulates the @code{load_defaults} function from\n" "libmysqlclient. It will fill an array with long options, ready to be parsed by\n" "@code{Getopt::Long}." msgstr "" #: gnu/packages/databases.scm:2243 gnu/packages/databases.scm:2269 msgid "Generate SQL from Perl data structures" msgstr "" #: gnu/packages/databases.scm:2244 msgid "" "This module was inspired by the excellent DBIx::Abstract.\n" "While based on the concepts used by DBIx::Abstract, the concepts used have\n" "been modified to make the SQL easier to generate from Perl data structures.\n" "The underlying idea is for this module to do what you mean, based on the data\n" "structures you provide it, so that you don't have to modify your code every\n" "time your data changes." msgstr "" #: gnu/packages/databases.scm:2271 msgid "" "This module is nearly identical to @code{SQL::Abstract} 1.81, and exists\n" "to preserve the ability of users to opt into the new way of doing things in\n" "later versions according to their own schedules.\n" "\n" "It is an abstract SQL generation module based on the concepts used by\n" "@code{DBIx::Abstract}, with several important differences, especially when it\n" "comes to @code{WHERE} clauses. These concepts were modified to make the SQL\n" "easier to generate from Perl data structures.\n" "\n" "The underlying idea is for this module to do what you mean, based on the data\n" "structures you provide it. You shouldn't have to modify your code every time\n" "your data changes, as this module figures it out." msgstr "" #: gnu/packages/databases.scm:2303 msgid "Split SQL code into atomic statements" msgstr "" #: gnu/packages/databases.scm:2304 msgid "" "This module tries to split any SQL code, even including\n" "non-standard extensions, into the atomic statements it is composed of." msgstr "" #: gnu/packages/databases.scm:2322 msgid "SQL tokenizer" msgstr "" #: gnu/packages/databases.scm:2323 msgid "" "SQL::Tokenizer is a tokenizer for SQL queries. It does not\n" "claim to be a parser or query verifier. It just creates sane tokens from a\n" "valid SQL query." msgstr "" #: gnu/packages/databases.scm:2341 msgid "Data source abstraction library" msgstr "" #: gnu/packages/databases.scm:2342 msgid "" "Unixodbc is a library providing an API with which to access\n" "data sources. Data sources include SQL Servers and any software with an ODBC\n" "Driver." msgstr "" #: gnu/packages/databases.scm:2373 msgid "C++ wrapper for the native C ODBC API" msgstr "" #: gnu/packages/databases.scm:2374 msgid "" "The goal for nanodbc is to make developers happy by providing\n" "a simpler and less verbose API for working with ODBC. Common tasks should be\n" "easy, requiring concise and simple code." msgstr "" #: gnu/packages/databases.scm:2433 msgid "In-memory key/value and document store" msgstr "" #: gnu/packages/databases.scm:2435 msgid "" "UnQLite is an in-process software library which implements a\n" "self-contained, serverless, zero-configuration, transactional NoSQL\n" "database engine. UnQLite is a document store database similar to\n" "Redis, CouchDB, etc., as well as a standard key/value store\n" "similar to BerkeleyDB, LevelDB, etc." msgstr "" #: gnu/packages/databases.scm:2485 msgid "Key-value cache and store" msgstr "" #: gnu/packages/databases.scm:2486 msgid "" "Redis is an advanced key-value cache and store. Redis\n" "supports many data structures including strings, hashes, lists, sets, sorted\n" "sets, bitmaps and hyperloglogs." msgstr "" #: gnu/packages/databases.scm:2509 msgid "Minimalistic C client library for the Redis database" msgstr "" #: gnu/packages/databases.scm:2510 msgid "" "This package provides a library for sending commands and\n" "receiving replies to and from a Redis server. It comes with a synchronous\n" "API, asynchronous API and reply parsing API. Only the binary-safe Redis\n" "protocol is supported." msgstr "" #: gnu/packages/databases.scm:2531 msgid "Ruby client for Redis' API" msgstr "" #: gnu/packages/databases.scm:2533 msgid "" "This package provides a Ruby client that tries to match Redis' API\n" "one-to-one, while still providing an idiomatic interface." msgstr "" #: gnu/packages/databases.scm:2556 msgid "Redis RDB parser for Go" msgstr "" #: gnu/packages/databases.scm:2558 msgid "Package rdb implements parsing and encoding of the Redis RDB file format." msgstr "" #: gnu/packages/databases.scm:2582 msgid "Go client for Redis" msgstr "" #: gnu/packages/databases.scm:2584 msgid "Redigo is a Go client for the Redis database." msgstr "" #: gnu/packages/databases.scm:2608 msgid "Kyoto Cabinet is a modern implementation of the DBM database" msgstr "" #: gnu/packages/databases.scm:2610 msgid "" "Kyoto Cabinet is a standalone file-based database that supports Hash\n" "and B+ Tree data storage models. It is a fast key-value lightweight\n" "database and supports many programming languages. It is a NoSQL database." msgstr "" #: gnu/packages/databases.scm:2636 msgid "Tokyo Cabinet is a modern implementation of the DBM database" msgstr "" #: gnu/packages/databases.scm:2638 msgid "" "Tokyo Cabinet is a library of routines for managing a database.\n" "The database is a simple data file containing records, each is a pair of a\n" "key and a value. Every key and value is serial bytes with variable length.\n" "Both binary data and character string can be used as a key and a value.\n" "There is neither concept of data tables nor data types. Records are\n" "organized in hash table, B+ tree, or fixed-length array." msgstr "" #: gnu/packages/databases.scm:2672 msgid "NoSQL data engine" msgstr "" #: gnu/packages/databases.scm:2674 msgid "" "WiredTiger is an extensible platform for data management. It supports\n" "row-oriented storage (where all columns of a row are stored together),\n" "column-oriented storage (where columns are stored in groups, allowing for\n" "more efficient access and storage of column subsets) and log-structured merge\n" "trees (LSM), for sustained throughput under random insert workloads." msgstr "" #: gnu/packages/databases.scm:2722 msgid "WiredTiger bindings for GNU Guile" msgstr "" #: gnu/packages/databases.scm:2724 msgid "" "This package provides Guile bindings to the WiredTiger ``NoSQL''\n" "database." msgstr "" #: gnu/packages/databases.scm:2752 msgid "Perl5 access to Berkeley DB version 1.x" msgstr "" #: gnu/packages/databases.scm:2754 msgid "The DB::File module provides Perl bindings to the Berkeley DB version 1.x." msgstr "" #: gnu/packages/databases.scm:2800 msgid "Lightning Memory-Mapped Database library" msgstr "" #: gnu/packages/databases.scm:2802 msgid "" "The @dfn{Lightning Memory-Mapped Database} (LMDB) is a high-performance\n" "transactional database. Unlike more complex relational databases, LMDB handles\n" "only key-value pairs (stored as arbitrary byte arrays) and relies on the\n" "underlying operating system for caching and locking, keeping the code small and\n" "simple.\n" "The use of ‘zero-copy’ memory-mapped files combines the persistence of classic\n" "disk-based databases with high read performance that scales linearly over\n" "multiple cores. The size of each database is limited only by the size of the\n" "virtual address space — not physical RAM." msgstr "" #: gnu/packages/databases.scm:2835 msgid "C++11 wrapper for the LMDB embedded B+ tree database library" msgstr "" #: gnu/packages/databases.scm:2836 msgid "" "@code{lmdbxx} is a comprehensive @code{C++} wrapper for the\n" "@code{LMDB} embedded database library, offering both an error-checked\n" "procedural interface and an object-oriented resource interface with RAII\n" "semantics." msgstr "" #: gnu/packages/databases.scm:2859 msgid "C++ connector for PostgreSQL" msgstr "" #: gnu/packages/databases.scm:2861 msgid "" "Libpqxx is a C++ library to enable user programs to communicate with the\n" "PostgreSQL database back-end. The database back-end can be local or it may be\n" "on another machine, accessed via TCP/IP." msgstr "" #: gnu/packages/databases.scm:2888 msgid "Embedded key/value database for Go" msgstr "" #: gnu/packages/databases.scm:2889 msgid "" "Bolt is a pure Go key/value store inspired by Howard Chu's\n" "LMDB project. The goal of the project is to provide a simple, fast, and\n" "reliable database for projects that don't require a full database server such as\n" "Postgres or MySQL." msgstr "" #: gnu/packages/databases.scm:2913 msgid "Small object-relational mapping utility" msgstr "" #: gnu/packages/databases.scm:2915 msgid "" "Peewee is a simple and small ORM (object-relation mapping) tool. Peewee\n" "handles converting between pythonic values and those used by databases, so you\n" "can use Python types in your code without having to worry. It has built-in\n" "support for sqlite, mysql and postgresql. If you already have a database, you\n" "can autogenerate peewee models using @code{pwiz}, a model generator." msgstr "" #: gnu/packages/databases.scm:2934 msgid "Pypika fork for tortoise-orm" msgstr "" #: gnu/packages/databases.scm:2935 msgid "" "Pypika-tortoise is a fork of pypika which has been\n" "streamlined for its use in the context of tortoise-orm. It removes support\n" "for many database kinds that tortoise-orm doesn't need, for example." msgstr "" #: gnu/packages/databases.scm:2954 msgid "Sphinx extension to support coroutines in markup" msgstr "" #: gnu/packages/databases.scm:2955 msgid "" "This package is a Sphinx extension providing additional\n" "coroutine-specific markup." msgstr "" #: gnu/packages/databases.scm:2977 msgid "Fast PostgreSQL database client library for Python" msgstr "" #: gnu/packages/databases.scm:2978 msgid "" "@code{asyncpg} is a database interface library designed\n" "specifically for PostgreSQL and Python/asyncio. @code{asyncpg} is an\n" "efficient, clean implementation of PostgreSQL server binary protocol for use\n" "with Python's asyncio framework." msgstr "" #: gnu/packages/databases.scm:2997 msgid "Fast MySQL driver for Python" msgstr "" #: gnu/packages/databases.scm:2998 msgid "" "@code{asyncmy} is a fast @code{asyncio} MySQL driver, which\n" "reuses most of @code{pymysql} and @code{aiomysql} but rewrites the core\n" "protocol with Cython for performance." msgstr "" #: gnu/packages/databases.scm:3017 msgid "MySQL driver for Python" msgstr "" #: gnu/packages/databases.scm:3018 msgid "" "@code{aiomysql} is a driver for accessing a MySQL database\n" "from the @code{asyncio} Python framework. It depends on and reuses most parts\n" "of PyMySQL. @code{aiomysql} tries to preserve the same API as the\n" "@code{aiopg} library." msgstr "" #: gnu/packages/databases.scm:3050 msgid "Asynchronous Object Relational Mapper (ORM) for Python" msgstr "" #: gnu/packages/databases.scm:3051 msgid "" "Tortoise ORM is an easy-to-use asyncio ORM (Object\n" "Relational Mapper) inspired by Django. Tortoise ORM was built with relations\n" "in mind and admiration for the excellent and popular Django ORM. It's\n" "engraved in its design that you are working not with just tables, you work\n" "with relational data." msgstr "" #: gnu/packages/databases.scm:3095 msgid "Library providing transparent encryption of SQLite database files" msgstr "" #: gnu/packages/databases.scm:3096 msgid "" "SQLCipher is an implementation of SQLite, extended to\n" "provide transparent 256-bit AES encryption of database files. Pages are\n" "encrypted before being written to disk and are decrypted when read back. It’s\n" "well suited for protecting embedded application databases and for mobile\n" "development." msgstr "" #: gnu/packages/databases.scm:3128 msgid "Python ODBC Library written in C" msgstr "" #: gnu/packages/databases.scm:3129 msgid "" "@code{python-pyodbc-c} provides a Python DB-API driver\n" "for ODBC, similar to python-pyodbc but written in C.\n" "\n" "It's designed to stand alone and not have other dependencies on other packages\n" "or languages. It uses only Python's built-in data types." msgstr "" #: gnu/packages/databases.scm:3164 msgid "Python ODBC Library" msgstr "" #: gnu/packages/databases.scm:3165 msgid "" "@code{python-pyodbc} provides a Python DB-API driver\n" "for ODBC." msgstr "" #: gnu/packages/databases.scm:3194 msgid "Read Microsoft Access databases" msgstr "" #: gnu/packages/databases.scm:3195 msgid "" "MDB Tools is a set of tools and applications to read the\n" "proprietary MDB file format used in Microsoft's Access database package. This\n" "includes programs to export schema and data from Microsoft's Access database\n" "file format to other databases such as MySQL, Oracle, Sybase, PostgreSQL,\n" "etc., and an SQL engine for performing simple SQL queries." msgstr "" #: gnu/packages/databases.scm:3223 msgid "MongoDB driver for Go" msgstr "" #: gnu/packages/databases.scm:3224 msgid "This package provides a MongoDB driver for Go." msgstr "" #: gnu/packages/databases.scm:3263 msgid "Python binding for the ‘Lightning’ database (LMDB)" msgstr "" #: gnu/packages/databases.scm:3265 msgid "" "python-lmdb or py-lmdb is a Python binding for the @dfn{Lightning\n" "Memory-Mapped Database} (LMDB), a high-performance key-value store." msgstr "" #: gnu/packages/databases.scm:3358 msgid "Multi-model database system" msgstr "" #: gnu/packages/databases.scm:3359 msgid "" "Virtuoso is a scalable cross-platform server that combines\n" "relational, graph, and document data management with web application server\n" "and web services platform functionality." msgstr "" #: gnu/packages/databases.scm:3384 msgid "" "Cassandra Cluster Manager for Apache Cassandra clusters on\n" "localhost" msgstr "" #: gnu/packages/databases.scm:3386 msgid "" "Cassandra Cluster Manager is a development tool for testing\n" "local Cassandra clusters. It creates, launches and removes Cassandra clusters\n" "on localhost." msgstr "" #: gnu/packages/databases.scm:3420 msgid "Database abstraction library" msgstr "" #: gnu/packages/databases.scm:3422 msgid "" "SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that\n" "gives application developers the full power and flexibility of SQL. It\n" "provides a full suite of well known enterprise-level persistence patterns,\n" "designed for efficient and high-performing database access, adapted into a\n" "simple and Pythonic domain language." msgstr "" #: gnu/packages/databases.scm:3444 msgid "SQLAlchemy stubs and mypy plugin" msgstr "" #: gnu/packages/databases.scm:3445 msgid "" "This package contains type stubs and a mypy plugin to\n" "provide more precise static types and type inference for SQLAlchemy\n" "framework." msgstr "" #: gnu/packages/databases.scm:3474 msgid "Various utility functions for SQLAlchemy" msgstr "" #: gnu/packages/databases.scm:3476 msgid "" "SQLAlchemy-utils provides various utility functions and custom data types\n" "for SQLAlchemy. SQLAlchemy is an SQL database abstraction library for Python.\n" "\n" "You might also want to install the following optional dependencies:\n" "@enumerate\n" "@item @code{python-passlib}\n" "@item @code{python-babel}\n" "@item @code{python-cryptography}\n" "@item @code{python-pytz}\n" "@item @code{python-psycopg2}\n" "@item @code{python-furl}\n" "@item @code{python-flask-babel}\n" "@end enumerate\n" msgstr "" #: gnu/packages/databases.scm:3521 msgid "Mock helpers for SQLAlchemy" msgstr "" #: gnu/packages/databases.scm:3523 msgid "" "This package provides mock helpers for SQLAlchemy that makes it easy\n" "to mock an SQLAlchemy session while preserving the ability to do asserts.\n" "\n" "Normally Normally SQLAlchemy's expressions cannot be easily compared as\n" "comparison on binary expression produces yet another binary expression, but\n" "this library provides functions to facilitate such comparisons." msgstr "" #: gnu/packages/databases.scm:3552 msgid "Database migration tool for SQLAlchemy" msgstr "" #: gnu/packages/databases.scm:3554 msgid "" "Alembic is a lightweight database migration tool for usage with the\n" "SQLAlchemy Database Toolkit for Python." msgstr "" #: gnu/packages/databases.scm:3577 msgid "Tiny key value database with concurrency support" msgstr "" #: gnu/packages/databases.scm:3579 msgid "" "PickleShare is a small ‘shelve’-like datastore with concurrency support.\n" "Like shelve, a PickleShareDB object acts like a normal dictionary. Unlike\n" "shelve, many processes can access the database simultaneously. Changing a\n" "value in database is immediately visible to other processes accessing the same\n" "database. Concurrency is possible because the values are stored in separate\n" "files. Hence the “database” is a directory where all files are governed by\n" "PickleShare." msgstr "" #: gnu/packages/databases.scm:3619 msgid "Another Python SQLite Wrapper" msgstr "" #: gnu/packages/databases.scm:3621 msgid "" "APSW is a Python wrapper for the SQLite embedded relational database\n" "engine. In contrast to other wrappers such as pysqlite it focuses on being a\n" "minimal layer over SQLite attempting just to translate the complete SQLite API\n" "into Python." msgstr "" #: gnu/packages/databases.scm:3653 msgid "Asyncio bridge for sqlite3" msgstr "" #: gnu/packages/databases.scm:3655 msgid "" "The package aiosqlite replicates the standard sqlite3 module, but with\n" "async versions of all the standard connection and cursor methods, and context\n" "managers for automatically closing connections." msgstr "" #: gnu/packages/databases.scm:3679 msgid "Async database support for Python" msgstr "" #: gnu/packages/databases.scm:3680 msgid "This package implements async database support for Python." msgstr "" #: gnu/packages/databases.scm:3701 msgid "Python PostgreSQL adapter" msgstr "" #: gnu/packages/databases.scm:3703 msgid "" "psycopg2 is a thread-safe PostgreSQL adapter that implements DB-API\n" "2.0." msgstr "" #: gnu/packages/databases.scm:3728 msgid "Connection pooler for psycopg" msgstr "" #: gnu/packages/databases.scm:3730 msgid "" "This module provides connection pool implementations that can be used\n" "with the @code{psycopg} PostgreSQL driver." msgstr "" #: gnu/packages/databases.scm:3802 msgid "PostgreSQL driver for Python" msgstr "" #: gnu/packages/databases.scm:3804 msgid "" "Psycopg 3 is a new implementation of the popular @code{psycopg2}\n" "database adapter for Python." msgstr "" #: gnu/packages/databases.scm:3837 msgid "SQLAlchemy schema displayer" msgstr "" #: gnu/packages/databases.scm:3838 msgid "" "This package provides a program to build Entity\n" "Relationship diagrams from a SQLAlchemy model (or directly from the\n" "database)." msgstr "" #: gnu/packages/databases.scm:3866 msgid "Database migrations with SQL" msgstr "" #: gnu/packages/databases.scm:3868 msgid "" "Yoyo is a database schema migration tool. Migrations are written as SQL\n" "files or Python scripts that define a list of migration steps." msgstr "" #: gnu/packages/databases.scm:3888 msgid "MySQLdb is an interface to the popular MySQL database server for Python" msgstr "" #: gnu/packages/databases.scm:3889 msgid "" "MySQLdb is an interface to the popular MySQL database server\n" "for Python. The design goals are:\n" "@enumerate\n" "@item Compliance with Python database API version 2.0 [PEP-0249],\n" "@item Thread-safety,\n" "@item Thread-friendliness (threads will not block each other).\n" "@end enumerate" msgstr "" #: gnu/packages/databases.scm:3914 msgid "Python extension that wraps protocol parsing code in hiredis" msgstr "" #: gnu/packages/databases.scm:3915 msgid "" "Python-hiredis is a python extension that wraps protocol\n" "parsing code in hiredis. It primarily speeds up parsing of multi bulk replies." msgstr "" #: gnu/packages/databases.scm:3949 msgid "Redis support for Python's @code{asyncio} module" msgstr "" #: gnu/packages/databases.scm:3950 msgid "" "This package provides Redis support for the Python\n" "@code{asyncio} (PEP 3156) module." msgstr "" #: gnu/packages/databases.scm:3972 msgid "Fake implementation of redis API for testing purposes" msgstr "" #: gnu/packages/databases.scm:3974 msgid "" "Fakeredis is a pure-Python implementation of the redis-py Python client\n" "that simulates talking to a redis server. It was created for a single purpose:\n" "to write unit tests.\n" "\n" "Setting up redis is not hard, but one often wants to write unit tests that don't\n" "talk to an external server such as redis. This module can be used as a\n" "reasonable substitute." msgstr "" #: gnu/packages/databases.scm:4000 msgid "Redis Python client" msgstr "" #: gnu/packages/databases.scm:4002 msgid "This package provides a Python interface to the Redis key-value store." msgstr "" #: gnu/packages/databases.scm:4038 msgid "Simple job queues for Python" msgstr "" #: gnu/packages/databases.scm:4040 msgid "" "RQ (Redis Queue) is a simple Python library for queueing jobs and\n" "processing them in the background with workers. It is backed by Redis and it\n" "is designed to have a low barrier to entry." msgstr "" #: gnu/packages/databases.scm:4075 msgid "Job scheduling capabilities for RQ (Redis Queue)" msgstr "" #: gnu/packages/databases.scm:4077 msgid "" "This package provides job scheduling capabilities to @code{python-rq}\n" "(Redis Queue)." msgstr "" #: gnu/packages/databases.scm:4115 msgid "Non-validating SQL parser" msgstr "" #: gnu/packages/databases.scm:4116 msgid "" "Sqlparse is a non-validating SQL parser for Python. It\n" "provides support for parsing, splitting and formatting SQL statements." msgstr "" #: gnu/packages/databases.scm:4133 msgid "Library to write SQL queries in a pythonic way" msgstr "" #: gnu/packages/databases.scm:4134 msgid "" "@code{python-sql} is a library to write SQL queries, that\n" "transforms idiomatic python function calls to well-formed SQL queries." msgstr "" #: gnu/packages/databases.scm:4155 msgid "SQL query builder API for Python" msgstr "" #: gnu/packages/databases.scm:4157 msgid "" "PyPika is a python SQL query builder that exposes the full richness of\n" "the SQL language using a syntax that reflects the resulting query." msgstr "" #: gnu/packages/databases.scm:4282 gnu/packages/databases.scm:4414 #: gnu/packages/databases.scm:4540 msgid "Columnar in-memory analytics" msgstr "" #: gnu/packages/databases.scm:4283 gnu/packages/databases.scm:4415 #: gnu/packages/databases.scm:4541 msgid "" "Apache Arrow is a columnar in-memory analytics layer\n" "designed to accelerate big data. It houses a set of canonical in-memory\n" "representations of flat and hierarchical data along with multiple\n" "language-bindings for structure manipulation. It also provides IPC and common\n" "algorithm implementations." msgstr "" #: gnu/packages/databases.scm:4582 gnu/packages/databases.scm:4640 msgid "Python bindings for Apache Arrow" msgstr "" #: gnu/packages/databases.scm:4584 gnu/packages/databases.scm:4642 msgid "" "This library provides a Pythonic API wrapper for the reference Arrow C++\n" "implementation, along with tools for interoperability with pandas, NumPy, and\n" "other traditional Python scientific computing packages." msgstr "" #: gnu/packages/databases.scm:4661 msgid "CrateDB Python client" msgstr "" #: gnu/packages/databases.scm:4663 msgid "" "This package provides a Python client library for CrateDB.\n" "It implements the Python DB API 2.0 specification and includes support for\n" "SQLAlchemy." msgstr "" #: gnu/packages/databases.scm:4680 msgid "Database independent abstraction layer in C" msgstr "" #: gnu/packages/databases.scm:4682 msgid "" "This library implements a database independent abstraction layer in C,\n" "similar to the DBI/DBD layer in Perl. Writing one generic set of code,\n" "programmers can leverage the power of multiple databases and multiple\n" "simultaneous database connections by using this framework." msgstr "" #: gnu/packages/databases.scm:4746 msgid "Database drivers for the libdbi framework" msgstr "" #: gnu/packages/databases.scm:4748 msgid "" "The @code{libdbi-drivers} library provides the database specific drivers\n" "for the @code{libdbi} framework.\n" "\n" "The drivers officially supported by @code{libdbi} are:\n" "@itemize\n" "@item MySQL,\n" "@item PostgreSQL,\n" "@item SQLite.\n" "@end itemize" msgstr "" #: gnu/packages/databases.scm:4788 msgid "C++ Database Access Library" msgstr "" #: gnu/packages/databases.scm:4790 msgid "" "SOCI is an abstraction layer for several database backends, including\n" "PostreSQL, SQLite, ODBC and MySQL." msgstr "" #: gnu/packages/databases.scm:4812 msgid "Client libraries for MS SQL and Sybase servers" msgstr "" #: gnu/packages/databases.scm:4814 msgid "" "FreeTDS is an implementation of the Tabular DataStream protocol, used for\n" "connecting to MS SQL and Sybase servers over TCP/IP." msgstr "" #: gnu/packages/databases.scm:4834 msgid "TinyDB is a lightweight document oriented database" msgstr "" #: gnu/packages/databases.scm:4836 msgid "" "TinyDB is a small document oriented database written in pure Python\n" "with no external dependencies. The targets are small apps that would\n" "be blown away by a SQL-DB or an external database server." msgstr "" #: gnu/packages/databases.scm:4883 msgid "Friendly SQL Client" msgstr "" #: gnu/packages/databases.scm:4884 msgid "" "Sequeler is a native Linux SQL client built in Vala and\n" "Gtk. It allows you to connect to your local and remote databases, write SQL in\n" "a handy text editor with language recognition, and visualize SELECT results in\n" "a Gtk.Grid Widget." msgstr "" #: gnu/packages/databases.scm:4928 msgid "Visual database browser and editor for SQLite" msgstr "" #: gnu/packages/databases.scm:4929 msgid "" "Sqlitebrowser lets you create, design, and edit database files\n" "compatible with SQLite using a graphical user interface." msgstr "" #: gnu/packages/databases.scm:4963 msgid "SQL language server written in Go" msgstr "" #: gnu/packages/databases.scm:4965 msgid "This package implements the @acronym{LSP, Language Server Protocol} for SQL." msgstr "" #: gnu/packages/databases.scm:4989 msgid "Caching front-end based on the Dogpile lock" msgstr "" #: gnu/packages/databases.scm:4990 msgid "" "@code{dogpile.cache} is a caching API which provides a\n" "generic interface to caching backends of any variety, and additionally\n" "provides API hooks which integrate these cache backends with the locking\n" "mechanism of @code{dogpile}." msgstr "" #: gnu/packages/debug.scm:117 msgid "Heuristical file minimizer" msgstr "" #: gnu/packages/debug.scm:119 msgid "" "Delta assists you in minimizing \"interesting\" files subject to a test\n" "of their interestingness. A common such situation is when attempting to\n" "isolate a small failure-inducing substring of a large input that causes your\n" "program to exhibit a bug." msgstr "" #: gnu/packages/debug.scm:178 gnu/packages/debug.scm:230 msgid "Reducer for interesting code" msgstr "" #: gnu/packages/debug.scm:180 msgid "" "C-Reduce is a tool that takes a large C or C++ program that has a\n" "property of interest (such as triggering a compiler bug) and automatically\n" "produces a much smaller C/C++ program that has the same property. It is\n" "intended for use by people who discover and report bugs in compilers and other\n" "tools that process C/C++ code." msgstr "" #: gnu/packages/debug.scm:232 msgid "" "C-Vise is a Python port of the C-Reduce tool that is fully compatible\n" "and uses the same efficient LLVM-based C/C++ @code{clang_delta} reduction\n" "tool." msgstr "" #: gnu/packages/debug.scm:300 msgid "Security-oriented fuzzer" msgstr "" #: gnu/packages/debug.scm:302 msgid "" "American fuzzy lop is a security-oriented fuzzer that employs a novel\n" "type of compile-time instrumentation and genetic algorithms to automatically\n" "discover clean, interesting test cases that trigger new internal states in the\n" "targeted binary. This substantially improves the functional coverage for the\n" "fuzzed code. The compact synthesized corpora produced by the tool are also\n" "useful for seeding other, more labor- or resource-intensive testing regimes\n" "down the road." msgstr "" #: gnu/packages/debug.scm:444 msgid "Machine emulator and virtualizer (without GUI) for american fuzzy lop" msgstr "" #: gnu/packages/debug.scm:446 msgid "" "QEMU is a generic machine emulator and virtualizer. This package\n" "of QEMU is used only by the american fuzzy lop package.\n" "\n" "When used as a machine emulator, QEMU can run OSes and programs made for one\n" "machine (e.g. an ARM board) on a different machine---e.g., your own PC. By\n" "using dynamic translation, it achieves very good performance.\n" "\n" "When used as a virtualizer, QEMU achieves near native performances by\n" "executing the guest code directly on the host CPU. QEMU supports\n" "virtualization when executing under the Xen hypervisor or using\n" "the KVM kernel module in Linux. When using KVM, QEMU can virtualize x86,\n" "server and embedded PowerPC, and S390 guests." msgstr "" #: gnu/packages/debug.scm:512 msgid "Expose race conditions in Makefiles" msgstr "" #: gnu/packages/debug.scm:514 msgid "" "Stress Make is a customized GNU Make that explicitly manages the order\n" "in which concurrent jobs are run to provoke erroneous behavior into becoming\n" "manifest. It can run jobs in the order in which they're launched, in backwards\n" "order, or in random order. The thought is that if code builds correctly with\n" "Stress Make, then it is likely that the @code{Makefile} contains no race\n" "conditions." msgstr "" #: gnu/packages/debug.scm:541 msgid "Transparent application input fuzzer" msgstr "" #: gnu/packages/debug.scm:542 msgid "" "Zzuf is a transparent application input fuzzer. It works by\n" "intercepting file operations and changing random bits in the program's\n" "input. Zzuf's behaviour is deterministic, making it easy to reproduce bugs." msgstr "" #: gnu/packages/debug.scm:593 msgid "Memory scanner" msgstr "" #: gnu/packages/debug.scm:594 msgid "" "Scanmem is a debugging utility designed to isolate the\n" "address of an arbitrary variable in an executing process. Scanmem simply\n" "needs to be told the pid of the process and the value of the variable at\n" "several different times. After several scans of the process, scanmem isolates\n" "the position of the variable and allows you to modify its value." msgstr "" #: gnu/packages/debug.scm:624 msgid "" "Remake is an enhanced version of GNU Make that adds improved\n" "error reporting, better tracing, profiling, and a debugger." msgstr "" #: gnu/packages/debug.scm:680 msgid "Record and reply debugging framework" msgstr "" #: gnu/packages/debug.scm:682 msgid "" "rr is a lightweight tool for recording, replaying and debugging\n" "execution of applications (trees of processes and threads). Debugging extends\n" "GDB with very efficient reverse-execution, which in combination with standard\n" "GDB/x86 features like hardware data watchpoints, makes debugging much more\n" "fun." msgstr "" #: gnu/packages/debug.scm:709 msgid "C library for producing symbolic backtraces" msgstr "" #: gnu/packages/debug.scm:710 msgid "" "The @code{libbacktrace} library can be linked into a C/C++\n" "program to produce symbolic backtraces." msgstr "" #: gnu/packages/debug.scm:749 msgid "Memory leaks detection tool" msgstr "" #: gnu/packages/debug.scm:750 msgid "" "The libleak tool detects memory leaks by hooking memory\n" "functions such as @code{malloc}. It comes as a shared object to be pre-loaded\n" "via @code{LD_PRELOAD} when launching the application. It prints the full call\n" "stack at suspicious memory leak points. Modifying or recompiling the target\n" "program is not required, and the detection can be enabled or disabled while\n" "the target application is running. The overhead incurred by libleak is\n" "smaller than that of other tools such as Valgrind, and it aims to be easier to\n" "use than similar tools like @command{mtrace}." msgstr "" #: gnu/packages/debug.scm:792 msgid "Console front-end to the GNU debugger" msgstr "" #: gnu/packages/debug.scm:794 msgid "" "@code{cgdb} is a lightweight curses (terminal-based) interface to the\n" "GNU Debugger (GDB). In addition to the standard gdb console, cgdb provides\n" "a split screen view that displays the source code as it executes. The\n" "keyboard interface is modeled after vim, so vim users should feel at home\n" "using cgdb." msgstr "" #: gnu/packages/debug.scm:828 msgid "Debugging tool for MSP430 MCUs" msgstr "" #: gnu/packages/debug.scm:829 msgid "" "MspDebug supports FET430UIF, eZ430, RF2500 and Olimex\n" "MSP430-JTAG-TINY programmers, as well as many other compatible\n" "devices. It can be used as a proxy for gdb or as an independent\n" "debugger with support for programming, disassembly and reverse\n" "engineering." msgstr "" #: gnu/packages/debug.scm:860 msgid "GUI frontend for GDB" msgstr "" #: gnu/packages/debug.scm:861 msgid "This package provides a frontend to GDB, the GNU debugger." msgstr "" #: gnu/packages/debug.scm:886 msgid "Graphical front-end for GDB and other debuggers" msgstr "" #: gnu/packages/debug.scm:887 msgid "" "GNU DDD, the Data Display Debugger, is a graphical front-end\n" "for command-line debuggers. Many back-end debuggers are supported, notably\n" "the GNU debugger, GDB. In addition to usual debugging features such as\n" "viewing the source files, DDD has additional graphical, interactive features\n" "to aid in debugging." msgstr "" #: gnu/packages/debug.scm:918 msgid "Debugger for the Go programming language" msgstr "" #: gnu/packages/debug.scm:919 msgid "Delve is a debugger for the Go programming language." msgstr "" #: gnu/packages/dejagnu.scm:78 msgid "GNU software testing framework" msgstr "" #: gnu/packages/dejagnu.scm:80 msgid "" "DejaGnu is a framework for testing software. In effect, it serves as\n" "a front-end for all tests written for a program. Thus, each program can have\n" "multiple test suites, which are then all managed by a single harness." msgstr "" #: gnu/packages/games.scm:291 msgid "Scrolling, platform-jumping, ancient pyramid exploring game" msgstr "" #: gnu/packages/games.scm:293 msgid "" "Abe's Amazing Adventure is a scrolling,\n" "platform-jumping, key-collecting, ancient pyramid exploring game, vaguely in\n" "the style of similar games for the Commodore+4." msgstr "" #: gnu/packages/games.scm:361 msgid "Action game in four spatial dimensions" msgstr "" #: gnu/packages/games.scm:363 msgid "" "Adanaxis is a fast-moving first person shooter set in deep space, where\n" "the fundamentals of space itself are changed. By adding another dimension to\n" "space this game provides an environment with movement in four directions and\n" "six planes of rotation. Initially the game explains the 4D control system via\n" "a graphical sequence, before moving on to 30 levels of gameplay with numerous\n" "enemy, ally, weapon and mission types. Features include simulated 4D texturing,\n" "mouse and joystick control, and original music." msgstr "" #: gnu/packages/games.scm:405 msgid "Retro platform game" msgstr "" #: gnu/packages/games.scm:407 msgid "" "Guide Alex the Allegator through the jungle in order to save his\n" "girlfriend Lola from evil humans who want to make a pair of shoes out of her.\n" "Plenty of classic platforming in four nice colors guaranteed!\n" "\n" "The game includes a built-in editor so you can design and share your own maps." msgstr "" #: gnu/packages/games.scm:436 msgid "Tron clone in 3D" msgstr "" #: gnu/packages/games.scm:437 msgid "" "Armagetron Advanced is a multiplayer game in 3d that\n" "attempts to emulate and expand on the lightcycle sequence from the movie Tron.\n" "It's an old school arcade game slung into the 21st century. Highlights\n" "include a customizable playing arena, HUD, unique graphics, and AI bots. For\n" "the more advanced player there are new game modes and a wide variety of\n" "physics settings to tweak as well." msgstr "" #: gnu/packages/games.scm:490 msgid "3D space shooter with spaceship upgrade possibilities" msgstr "" #: gnu/packages/games.scm:492 msgid "" "Space is a vast area, an unbounded territory where it seems there is\n" "a room for everybody, but reversal of fortune put things differently. The\n" "hordes of hostile creatures crawled out from the dark corners of the universe,\n" "craving to conquer your homeland. Their force is compelling, their legions\n" "are interminable. However, humans didn't give up without a final showdown and\n" "put their best pilot to fight back. These malicious invaders chose the wrong\n" "galaxy to conquer and you are to prove it! Go ahead and make alien aggressors\n" "regret their insolence." msgstr "" #: gnu/packages/games.scm:548 msgid "3D first-person roguelike game" msgstr "" #: gnu/packages/games.scm:550 msgid "" "Barony is a first-person roguelike role-playing game with cooperative\n" "play. The player must descend a dark dungeon and destroy an undead lich while\n" "avoiding traps and fighting monsters. The game features randomly generated\n" "dungeons, 13 character classes, hundreds of items and artifacts, and\n" "cooperative multiplayer for up to four players. This package does @emph{not}\n" "provide the game assets." msgstr "" #: gnu/packages/games.scm:611 msgid "Antagonistic Tetris-style falling brick game for text terminals" msgstr "" #: gnu/packages/games.scm:613 msgid "" "Bastet (short for Bastard Tetris) is a simple ncurses-based falling brick\n" "game. Unlike normal Tetris, Bastet does not choose the next brick at random.\n" "Instead, it uses a special algorithm to choose the worst brick possible.\n" "\n" "Playing bastet can be a painful experience, especially if you usually make\n" "canyons and wait for the long I-shaped block to clear four rows at a time." msgstr "" #: gnu/packages/games.scm:657 msgid "Terminal-based multiplayer Tetris clone" msgstr "" #: gnu/packages/games.scm:658 msgid "" "Tetrinet is a multiplayer Tetris-like game with powerups and\n" "attacks you can use on opponents." msgstr "" #: gnu/packages/games.scm:691 msgid "Terminal-based Tetris clone" msgstr "" #: gnu/packages/games.scm:692 msgid "" "Vitetris is a classic multiplayer Tetris clone for the\n" "terminal." msgstr "" #: gnu/packages/games.scm:734 msgid "Platform action game featuring a blob with a lot of weapons" msgstr "" #: gnu/packages/games.scm:735 msgid "" "Blobwars: Metal Blob Solid is a 2D platform game, the first\n" "in the Blobwars series. You take on the role of a fearless Blob agent. Your\n" "mission is to infiltrate various enemy bases and rescue as many MIAs as\n" "possible, while battling many vicious aliens." msgstr "" #: gnu/packages/games.scm:826 msgid "Collection of the old text-based games and amusements" msgstr "" #: gnu/packages/games.scm:828 msgid "" "These are the BSD games.\n" "\n" "Action: atc (keep the airplanes safe), hack (explore the dangerous Dungeon),\n" "hunt (kill the others for the Pair of Boots, multi-player only), robots (avoid\n" "the evil robots), sail (game of naval warfare with wooden ships), snake (steal\n" "the $$ from the cave, anger the snake, and get out alive), tetris (game of\n" "lining up the falling bricks of different shapes), and worm (eat, grow big,\n" "and neither bite your tail, nor ram the wall).\n" "\n" "Amusements: banner (prints a large banner), bcd & morse & ppt (print a punch\n" "card, or paper tape, or Morse codes), caesar & rot13 (ciphers and deciphers\n" "the input), factor (factorizes a number), number (translates numbers into\n" "text), pig (translates from English to Pig Latin), pom (should print the\n" "Moon's phase), primes (generates primes), rain & worms (plays an screen-saver\n" "in terminal), random (prints randomly chosen lines from files, or returns a\n" "random exit-code), and wtf (explains what do some acronyms mean).\n" "\n" "Board: backgammon (lead the men out of board faster than the friend do),\n" "boggle (find the words in the square of letters), dab (game of dots and\n" "boxes), gomoku (game of five in a row), hangman (guess a word before man is\n" "hanged), and monop (game of monopoly, hot-seat only). Also the card-games:\n" "canfield, cribbage, fish (juniors game), and mille.\n" "\n" "Quests: adventure (search for treasures with the help of wizard),\n" "battlestar (explore the world around, starting from dying spaceship),\n" "phantasia (role-play as an rogue), trek (hunt the Klingons, and save the\n" "Federation), and wump (hunt the big smelly Wumpus in a dark cave).\n" "\n" "Quizzes: arithmetic and quiz." msgstr "" #: gnu/packages/games.scm:921 msgid "3D first person tank battle game" msgstr "" #: gnu/packages/games.scm:923 msgid "" "BZFlag is a 3D multi-player multiplatform tank battle game that\n" "allows users to play against each other in a network environment.\n" "There are five teams: red, green, blue, purple and rogue (rogue tanks\n" "are black). Destroying a player on another team scores a win, while\n" "being destroyed or destroying a teammate scores a loss. Rogues have\n" "no teammates (not even other rogues), so they cannot shoot teammates\n" "and they do not have a team score.\n" "\n" "There are two main styles of play: capture-the-flag and free-for-all.\n" "In capture-the-flag, each team (except rogues) has a team base and\n" "each team with at least one player has a team flag. The object is to\n" "capture an enemy team's flag by bringing it to your team's base. This\n" "destroys every player on the captured team, subtracts one from that\n" "team's score, and adds one to your team's score. In free-for-all,\n" "there are no team flags or team bases. The object is simply to get as\n" "high a score as possible." msgstr "" #: gnu/packages/games.scm:1004 msgid "Survival horror roguelike video game" msgstr "" #: gnu/packages/games.scm:1006 msgid "" "Cataclysm: Dark Days Ahead (or \"DDA\" for short) is a roguelike set\n" "in a post-apocalyptic world. Struggle to survive in a harsh, persistent,\n" "procedurally generated world. Scavenge the remnants of a dead civilization\n" "for food, equipment, or, if you are lucky, a vehicle with a full tank of gas\n" "to get you out of Dodge. Fight to defeat or escape from a wide variety of\n" "powerful monstrosities, from zombies to giant insects to killer robots and\n" "things far stranger and deadlier, and against the others like yourself, that\n" "want what you have." msgstr "" #: gnu/packages/games.scm:1054 msgid "Tabletop card game simulator" msgstr "" #: gnu/packages/games.scm:1055 msgid "" "Cockatrice is a program for playing tabletop card games\n" "over a network. Its server design prevents users from manipulating the game\n" "for unfair advantage. The client also provides a single-player mode, which\n" "allows users to brew while offline." msgstr "" #: gnu/packages/games.scm:1107 msgid "Implementation of the @i{Theme Hospital} game engine" msgstr "" #: gnu/packages/games.scm:1109 msgid "" "This package provides a reimplementation of the 1997 Bullfrog business\n" "simulation game @i{Theme Hospital}. As well as faithfully recreating the\n" "original engine, CorsixTH adds support for high resolutions, custom levels and\n" "more. This package does @emph{not} provide the game assets." msgstr "" #: gnu/packages/games.scm:1150 msgid "Speaking cow text filter" msgstr "" #: gnu/packages/games.scm:1151 msgid "" "Cowsay is basically a text filter. Send some text into it,\n" "and you get a cow saying your text. If you think a talking cow isn't enough,\n" "cows can think too: all you have to do is run @command{cowthink}. If you're\n" "tired of cows, a variety of other ASCII-art messengers are available." msgstr "" #: gnu/packages/games.scm:1180 msgid "Fallout 2 game engine" msgstr "" #: gnu/packages/games.scm:1181 #, scheme-format msgid "" "This package provides the Fallout 2 game engine. Game data\n" "should be placed in @file{~/.local/share/falltergeist}." msgstr "" #: gnu/packages/games.scm:1291 msgid "3D billiard game" msgstr "" #: gnu/packages/games.scm:1292 msgid "" "FooBillard++ is an advanced 3D OpenGL billiard game\n" "based on the original foobillard 3.0a sources from Florian Berger.\n" "You can play it with one or two players or against the computer.\n" "\n" "The game features:\n" "\n" "@itemize\n" "@item Wood paneled table with gold covers and gold diamonds.\n" "@item Reflections on balls.\n" "@item Zoom in and out, rotation, different angles and bird's eye view.\n" "@item Different game modes: 8 or 9-ball, Snooker or Carambole.\n" "@item Tournaments. Compete against other players.\n" "@item Animated cue with strength and eccentric hit adjustment.\n" "@item Jump shots and snipping.\n" "@item Realistic gameplay and billiard sounds.\n" "@item Red-Green stereo.\n" "@item And much more.\n" "@end itemize" msgstr "" #: gnu/packages/games.scm:1350 msgid "Free content game based on the Doom engine" msgstr "" #: gnu/packages/games.scm:1359 msgid "" "The Freedoom project aims to create a complete free content first person\n" "shooter game. Freedoom by itself is just the raw material for a game: it must\n" "be paired with a compatible game engine (such as @code{prboom-plus}) to be\n" "played. Freedoom complements the Doom engine with free levels, artwork, sound\n" "effects and music to make a completely free game." msgstr "" #: gnu/packages/games.scm:1412 msgid "Isometric role-playing game against killer robots" msgstr "" #: gnu/packages/games.scm:1414 msgid "" "Freedroid RPG is an @dfn{RPG} (Role-Playing Game) with isometric graphics.\n" "The game tells the story of a world destroyed by a conflict between robots and\n" "their human masters. To restore peace to humankind, the player must complete\n" "numerous quests while fighting off rebelling robots---either by taking control\n" "of them, or by simply blasting them to pieces with melee and ranged weapons in\n" "real-time combat." msgstr "" #: gnu/packages/games.scm:1477 msgid "Software for exploring cellular automata" msgstr "" #: gnu/packages/games.scm:1479 msgid "" "Golly simulates Conway's Game of Life and many other types of cellular\n" "automata. The following features are available:\n" "@enumerate\n" "@item Support for bounded and unbounded universes, with cells of up to 256\n" " states.\n" "@item Support for multiple algorithms, including Bill Gosper's Hashlife\n" " algorithm.\n" "@item Loading patterns from BMP, PNG, GIF and TIFF image files.\n" "@item Reading RLE, macrocell, Life 1.05/1.06, dblife and MCell files.\n" "@item Scriptable via Lua or Python.\n" "@item Extracting patterns, rules and scripts from zip files.\n" "@item Downloading patterns, rules and scripts from online archives.\n" "@item Pasting patterns from the clipboard.\n" "@item Unlimited undo/redo.\n" "@item Configurable keyboard shortcuts.\n" "@item Auto fit option to keep patterns within the view.\n" "@end enumerate" msgstr "" #: gnu/packages/games.scm:1534 msgid "Joy-Con controller daemon" msgstr "" #: gnu/packages/games.scm:1535 msgid "" "This package provides a userspace daemon for the Nintendo\n" "Joy-Con controllers." msgstr "" #: gnu/packages/games.scm:1563 msgid "Re-implementation of Caesar III game engine" msgstr "" #: gnu/packages/games.scm:1565 msgid "" "Engine for Caesar III, a city-building real-time strategy game.\n" "Julius includes some UI enhancements while preserving the logic (including\n" "bugs) of the original game, so that saved games are compatible. This package\n" "does not include game data." msgstr "" #: gnu/packages/games.scm:1599 msgid "Re-implementation of Caesar III game engine with gameplay changes" msgstr "" #: gnu/packages/games.scm:1601 msgid "" "Fork of Julius, an engine for the a city-building real-time strategy\n" "game Caesar III. Gameplay enhancements include:\n" "\n" "@itemize\n" "@item roadblocks;\n" "@item market special orders;\n" "@item global labour pool;\n" "@item partial warehouse storage;\n" "@item increased game limits;\n" "@item zoom controls.\n" "@end itemize\n" msgstr "" #: gnu/packages/games.scm:1639 msgid "Puzzle/platform game" msgstr "" #: gnu/packages/games.scm:1640 msgid "" "Me and My Shadow is a puzzle/platform game in which you try\n" "to reach the exit by solving puzzles. Spikes, moving blocks, fragile blocks\n" "and much more stand between you and the exit. Record your moves and let your\n" "shadow mimic them to reach blocks you couldn't reach alone." msgstr "" #: gnu/packages/games.scm:1692 msgid "2D retro side-scrolling game" msgstr "" #: gnu/packages/games.scm:1693 msgid "" "@code{Open Surge} is a 2D retro side-scrolling platformer\n" "inspired by the Sonic games. The player runs at high speeds through each\n" "level while collecting items and avoiding obstacles. The game includes a\n" "built-in level editor." msgstr "" #: gnu/packages/games.scm:1738 msgid "Multiplayer dungeon game involving knights and quests" msgstr "" #: gnu/packages/games.scm:1739 msgid "" "Knights is a multiplayer game involving several knights who\n" "must run around a dungeon and complete various quests. Each game revolves\n" "around a quest – for example, you might have to find some items and carry them\n" "back to your starting point. This may sound easy, but as there are only\n" "enough items in the dungeon for one player to win, you may end up having to\n" "kill your opponents to get their stuff! Other quests involve escaping from\n" "the dungeon, fighting a duel to the death against the enemy knights, or\n" "destroying an ancient book using a special wand." msgstr "" #: gnu/packages/games.scm:1788 msgid "Move the tiles until you obtain the 2048 tile" msgstr "" #: gnu/packages/games.scm:1789 msgid "" "GNOME 2048 provides a 2D grid for playing 2048, a\n" "single-player sliding tile puzzle game. The objective of the game is to merge\n" "together adjacent tiles of the same number until the sum of 2048 is achieved\n" "in one tile." msgstr "" #: gnu/packages/games.scm:1827 msgid "Chess board for GNOME" msgstr "" #: gnu/packages/games.scm:1828 msgid "" "GNOME Chess provides a 2D board for playing chess games\n" "against human or computer players. It supports loading and saving games in\n" "Portable Game Notation. To play against a computer, install a chess engine\n" "such as chess or stockfish." msgstr "" #: gnu/packages/games.scm:1888 msgid "Backgammon game" msgstr "" #: gnu/packages/games.scm:1889 msgid "" "The GNU backgammon application (also known as \"gnubg\") can\n" "be used for playing, analyzing and teaching the game. It has an advanced\n" "evaluation engine based on artificial neural networks suitable for both\n" "beginners and advanced players. In addition to a command-line interface, it\n" "also features an attractive, 3D representation of the playing board." msgstr "" #: gnu/packages/games.scm:1928 msgid "3d Rubik's cube game" msgstr "" #: gnu/packages/games.scm:1930 msgid "" "GNUbik is a puzzle game in which you must manipulate a cube to make\n" "each of its faces have a uniform color. The game is customizable, allowing\n" "you to set the size of the cube (the default is 3x3) or to change the colors.\n" "You may even apply photos to the faces instead of colors. The game is\n" "scriptable with Guile." msgstr "" #: gnu/packages/games.scm:1952 msgid "The game of Shogi (Japanese chess)" msgstr "" #: gnu/packages/games.scm:1953 msgid "" "GNU Shogi is a program that plays the game Shogi (Japanese\n" "Chess). It is similar to standard chess but this variant is far more complicated." msgstr "" #: gnu/packages/games.scm:1981 msgid "Tetris clone based on the SDL library" msgstr "" #: gnu/packages/games.scm:1983 msgid "" "LTris is a tetris clone: differently shaped blocks are falling down the\n" "rectangular playing field and can be moved sideways or rotated by 90 degree\n" "units with the aim of building lines without gaps which then disappear (causing\n" "any block above the deleted line to fall down). LTris has three game modes: In\n" "Classic you play until the stack of blocks reaches the top of the playing field\n" "and no new blocks can enter. In Figures the playing field is reset to a new\n" "figure each level and later on tiles and lines suddenly appear. In Multiplayer\n" "up to three players (either human or CPU) compete with each other sending\n" "removed lines to all opponents. There is also a Demo mode in which you can\n" "watch your CPU playing while enjoying a cup of tea!" msgstr "" #: gnu/packages/games.scm:2105 msgid "Classic dungeon crawl game" msgstr "" #: gnu/packages/games.scm:2106 msgid "" "NetHack is a single player dungeon exploration game that runs\n" "on a wide variety of computer systems, with a variety of graphical and text\n" "interfaces all using the same game engine. Unlike many other Dungeons &\n" "Dragons-inspired games, the emphasis in NetHack is on discovering the detail of\n" "the dungeon and not simply killing everything in sight - in fact, killing\n" "everything in sight is a good way to die quickly. Each game presents a\n" "different landscape - the random number generator provides an essentially\n" "unlimited number of variations of the dungeon and its denizens to be discovered\n" "by the player in one of a number of characters: you can pick your race, your\n" "role, and your gender." msgstr "" #: gnu/packages/games.scm:2148 msgid "Logical tile puzzle" msgstr "" #: gnu/packages/games.scm:2150 msgid "" "PipeWalker is a simple puzzle game with many diffent themes: connect all\n" "computers to one network server, bring water from a source to the taps, etc.\n" "The underlying mechanism is always the same: you must turn each tile in the\n" "grid in the right direction to combine all components into a single circuit.\n" "Every puzzle has a complete solution, although there may be more than one." msgstr "" #: gnu/packages/games.scm:2197 msgid "Version of the classic 3D shoot'em'up game Doom" msgstr "" #: gnu/packages/games.scm:2199 msgid "PrBoom+ is a Doom source port developed from the original PrBoom project." msgstr "" #: gnu/packages/games.scm:2246 msgid "Action platformer game" msgstr "" #: gnu/packages/games.scm:2248 msgid "" "ReTux is an action platformer loosely inspired by the Mario games,\n" "utilizing the art assets from the @code{SuperTux} project." msgstr "" #: gnu/packages/games.scm:2283 msgid "Thematic meditative game" msgstr "" #: gnu/packages/games.scm:2285 msgid "" "You are a robot moving around in a realm filled with ASCII characters.\n" "Examine humorously described though useless items as you search for a kitten\n" "among them. The theme of this Zen simulation is continued in its\n" "documentation." msgstr "" #: gnu/packages/games.scm:2388 msgid "Classical roguelike/sandbox game" msgstr "" #: gnu/packages/games.scm:2390 msgid "" "RogueBox Adventures is a graphical roguelike with strong influences\n" "from sandbox games like Minecraft or Terraria. The main idea of RogueBox\n" "Adventures is to offer the player a kind of roguelike toy-world. This world\n" "can be explored and changed freely." msgstr "" #: gnu/packages/games.scm:2498 msgid "Help Barbie the seahorse float on bubbles to the moon" msgstr "" #: gnu/packages/games.scm:2500 msgid "" "Barbie Seahorse Adventures is a retro style platform arcade game.\n" "You are Barbie the seahorse who travels through the jungle, up to the\n" "volcano until you float on bubbles to the moon. On the way to your\n" "final destination you will encounter various enemies, servants of the\n" "evil overlord who has stolen the galaxy crystal. Avoid getting hit\n" "and defeat them with your bubbles!" msgstr "" #: gnu/packages/games.scm:2558 msgid "Lightweight game engine for Action-RPGs" msgstr "" #: gnu/packages/games.scm:2560 msgid "" "Solarus is a 2D game engine written in C++, that can run games\n" "scripted in Lua. It has been designed with 16-bit classic Action-RPGs\n" "in mind." msgstr "" #: gnu/packages/games.scm:2587 msgid "Create and modify quests for the Solarus engine" msgstr "" #: gnu/packages/games.scm:2589 msgid "" "Solarus Quest Editor is a graphical user interface to create and\n" "modify quests for the Solarus engine." msgstr "" #: gnu/packages/games.scm:2664 msgid "Fast-paced local multiplayer arcade game" msgstr "" #: gnu/packages/games.scm:2665 msgid "" "In SuperStarfighter, up to four local players compete in a\n" "2D arena with fast-moving ships and missiles. Different game types are\n" "available, as well as a single-player mode with AI-controlled ships." msgstr "" #: gnu/packages/games.scm:2693 msgid "Jigsaw puzzle game that uses tetrominoes for the pieces" msgstr "" #: gnu/packages/games.scm:2695 msgid "" "Tetzle is a jigsaw puzzle game that uses tetrominoes for the pieces. Any image\n" "can be imported and used to create puzzles with a wide range of sizes. Games are\n" "saved automatically, and you can select between currently in progress games." msgstr "" #: gnu/packages/games.scm:2826 msgid "Fast-paced single-player racing game" msgstr "" #: gnu/packages/games.scm:2827 msgid "" "Trigger-rally is a 3D rally simulation with great physics\n" "for drifting on over 200 maps. Different terrain materials like dirt,\n" "asphalt, sand, ice, etc. and various weather, light, and fog conditions give\n" "this rally simulation the edge over many other games. You need to make it\n" "through the maps in often tight time limits and can further improve by beating\n" "the recorded high scores. All attached single races must be finished in time\n" "in order to win an event, unlocking additional events and cars. Most maps are\n" "equipped with spoken co-driver notes and co-driver icons." msgstr "" #: gnu/packages/games.scm:2881 msgid "UFO: AI map generator" msgstr "" #: gnu/packages/games.scm:2883 msgid "" "This package provides @command{ufo2map}, a program used to generate\n" "maps for the UFO: Alien Invasion strategy game." msgstr "" #: gnu/packages/games.scm:2923 msgid "UFO: AI data files" msgstr "" #: gnu/packages/games.scm:2925 msgid "This package contains maps and other assets for UFO: Alien Invasion." msgstr "" #: gnu/packages/games.scm:3010 msgid "Turn-based tactical strategy game" msgstr "" #: gnu/packages/games.scm:3012 msgid "" "UFO: Alien Invasion is a tactical strategy game set in the year 2084.\n" "You control a secret organisation charged with defending Earth from a brutal\n" "alien enemy. Build up your bases, prepare your team, and dive head-first into\n" "the fast and flowing turn-based combat.\n" "\n" "Over the long term you will need to conduct research into the alien threat to\n" "figure out their mysterious goals and use their powerful weapons for your own\n" "ends. You will produce unique items and use them in combat against your\n" "enemies.\n" "\n" "You can also use them against your friends with the multiplayer functionality.\n" "\n" "Warning: This is a pre-release version of UFO: AI! Some things may not work\n" "properly." msgstr "" #: gnu/packages/games.scm:3048 msgid "User interface for gnushogi" msgstr "" #: gnu/packages/games.scm:3049 msgid "A graphical user interface for the package @code{gnushogi}." msgstr "" #: gnu/packages/games.scm:3101 msgid "GNU/Linux port of the indie game \"l'Abbaye des Morts\"" msgstr "" #: gnu/packages/games.scm:3102 msgid "" "L'Abbaye des Morts is a 2D platform game set in 13th century\n" "France. The Cathars, who preach about good Christian beliefs, were being\n" "expelled by the Catholic Church out of the Languedoc region in France. One of\n" "them, called Jean Raymond, found an old church in which to hide, not knowing\n" "that beneath its ruin