aboutsummaryrefslogtreecommitdiff
path: root/build-aux/cuirass
ModeNameSize
-rw-r--r--gnu-system.scm965logplainabout
-rw-r--r--guix-modular.scm143logplainabout
-rw-r--r--hydra-to-cuirass.scm1788logplainabout
generated by cgit
ot partition to 1600 MiB. Change-Id: I9f8378c37743ae8e59a72228b9e8bdbad93b4473 Oleg Pykhalov 2024-01-14tests: install: Fix encrypted-home-os, encrypted-home-os-key-file tests....The installation no longer fits into the 1.6G, leading to a warning while running the test: guix system: warning: at least 1526.8 MB needed but only 1408.4 MB available in /mnt Followed by a failure: 93% [#################################################################### ]note: build failure may have been caused by lack of free disk space builder for `/gnu/store/8wl8q8nc1za0vlyv21jpzwgml45njgk2-module-import-compiled.drv' failed with exit code 1 This commit increases the root partition to 2G, making the test pass again. * gnu/tests/install.scm (%encrypted-root-installation-script): Increase the root partition to 2G. (%test-encrypted-home-os), (%test-encrypted-home-os-key-file): Increase the target size to 3G to accommodate for the larger root partition. Change-Id: I0f7092f7b7fc9992d3f895a1eaecf1f2065b7360 Signed-off-by: Ludovic Courtès <ludo@gnu.org> Tomas Volf 2024-01-14tests: install: Fix encrypted-root-os test....The installation no longer fits into the 1.6G, leading to a warning while running the test: guix system: warning: at least 1526.8 MB needed but only 1408.4 MB available in /mnt Followed by a failure: 93% [#################################################################### ]note: build failure may have been caused by lack of free disk space builder for `/gnu/store/8wl8q8nc1za0vlyv21jpzwgml45njgk2-module-import-compiled.drv' failed with exit code 1 This commit increases the root partition to 2G, making the test pass again. * gnu/tests/install.scm (%encrypted-root-installation-script): Increase the root partition to 2G. Change-Id: I4cc5c78cfbd93ab2ae92ec77603ce6fee0289843 Signed-off-by: Ludovic Courtès <ludo@gnu.org> Tomas Volf 2024-01-14tests: install: Use the smallest possible iteration time for LUKS....For testing that installation works, there is no need to spent 2000ms (the default) iterating while generating the encryption key. This commit therefore sets the iteration time to the lowest possible value, 1(ms). * gnu/tests/install.scm (%encrypted-root-installation-script): (%encrypted-home-installation-script): (%encrypted-root-not-boot-installation-script): Pass -i 1 to luksFormat invocation. Change-Id: Iab79459b48bebe4d293b18290a236c6414fb27fc Signed-off-by: Ludovic Courtès <ludo@gnu.org> Tomas Volf 2024-01-14tests: Add `encrypted-home-os-key-file' installation test....Based on encrypted-home-os, this test verifies unlocking via a key file. * gnu/tests/install.scm (%encrypted-home-os-key-file), (%encrypted-home-os-key-file-source): New variables. (%test-encrypted-home-os-key-file): New exported variables. (%encrypted-home-installation-script): Generate initrd with a key file for unlocking the LUKS. Change-Id: I04460155284bdef7e18da645f2b4b26bd8e86636 Signed-off-by: Ludovic Courtès <ludo@gnu.org> Tomas Volf 2023-08-25image: Add mbr-raw-image-type and use by default....* gnu/system/image.scm (mbr-disk-image, mbr-raw-image-type): New variables. (qcow2-image-type): Inherit mbr-disk-image. * guix/scripts/system.scm (%default-options): Use mbr-raw-image-type by default. * gnu/tests/install.scm (run-install): Use mbr-raw in the tests. * doc/guix-cookbook.texi (Guix System Image API): Update the list of image types. * doc/guix.texi (Invoking guix system, System Images, image-type Reference): Add mbr-raw and switch documented default to it. Josselin Poiret 2023-05-06tests: Add missing module imports for marionette-evaluated code....This missing imports became apparent with commit a09c7da8f8d8e732f969cf0a09aaa78f87032ab1, which runs the marionette service in a fresh Guile process with fewer imports. * gnu/tests/databases.scm (run-postgresql-test, run-timescaledb-test) (run-mysql-test): Add missing module imports for code passed to 'marionette-eval'. * gnu/tests/docker.scm (run-docker-test, run-docker-system-test): Likewise. * gnu/tests/mail.scm (run-dovecot-test, run-getmail-test): Likewise. * gnu/tests/monitoring.scm (run-zabbix-server-test): Likewise. * gnu/tests/pam.scm (run-test-pam-limits): Likewise. * gnu/tests/reconfigure.scm (run-switch-to-system-test) (run-install-bootloader-test): Likewise. * gnu/tests/security-token.scm (run-pcscd-test): Likewise. * gnu/tests/install.scm (gui-test-program): Likewise. * gnu/tests/telephony.scm (run-jami-test): Add modules to the #:imported-modules argument of 'marionette-operating-system'. [test]: Remove them from 'with-imported-modules'; remove 'with-extensions'. Add "d-bus tooling loaded" test to set up %load-path and %load-compiled-path so the marionette process can find guile-ac-d-bus and guile-packrat. Ludovic Courtès 2023-04-21tests: Use the client 'start-service' procedure....The previous code worked "by chance": 'start' from (shepherd service) happened to be in scope because the marionette REPL is created by a mere 'primitive-fork', and 'start' happened to kinda work. * gnu/tests/base.scm (run-basic-test): Use 'start-service' from (gnu services herd), not 'start' from (shepherd service), which is not supposed to work. * gnu/tests/install.scm (run-install): Likewise. Ludovic Courtès 2022-12-05Revert "tests: install: Fix iso-image-installer test."...This reverts commit 0f66ef9aa99d2043abccbc80d858bdeca57534ac. e2fsprogs is now included in the installation operating system since 34f69bc6e6ea555929ecca83ee7592f5261ff5f2, making this workaround obsolete. Suggested-by: Ludovic Courtès <ludo@gnu.org> Maxim Cournoyer 2022-09-30tests: install: Fix iso-image-installer test....This is a follow-up of: 45eac6cdf5c8d9d7b0c564b105c790d2d2007799. It fixes the following error: + mkfs.ext4 -L my-root /dev/vda2 sh: line 12: mkfs.ext4: command not found * gnu/tests/install.scm (%test-iso-image-installer): Add e2fsprogs to the appended packages. Mathieu Othacehe 2022-08-28build: marionette: Add support for Tesseract OCR....* gnu/build/marionette.scm (invoke-ocrad-ocr): New procedure. (invoke-tesseract-ocr): Likewise. (marionette-screen-text): Rename the #:ocrad argument to #:ocr. Dispatch the matching OCR invocation procedure. (wait-for-screen-text): Rename the #:ocrad argument to #:ocr. * gnu/tests/base.scm (run-basic-test): Adjust accordingly. * gnu/tests/install.scm (enter-luks-passphrase): Likewise. (enter-luks-passphrase-for-home): Likewise. Maxim Cournoyer 2022-08-09system: install: Always use 'current-guix'....Fixes <https://issues.guix.gnu.org/53210>. Reported by Mathieu Othacehe <othacehe@gnu.org>. * gnu/system/install.scm (%installation-services): Set 'guix' to use (current-guix) in 'guix-configuration'. * gnu/system/examples/vm-image.tmpl: Likewise. * gnu/tests/install.scm (operating-system-with-current-guix): Remove. (run-install, installation-os-for-gui-tests): Remove its uses. * Makefile.am (release): Remove intermediate use of 'update-guix-package.scm' and subsequent 'git commit' invocation. Ludovic Courtès 2022-04-08tests: Add "encrypted-home-os" installation test....* gnu/tests/install.scm (%encrypted-home-os) (%encrypted-home-installation-script) (enter-luks-passphrase-for-home) (%test-encrypted-home-os): New variables. Ludovic Courtès 2022-03-19tests: install: Add two new Btrfs RAID10 install test....* gnu/tests/install.scm (%btrfs-raid10-root-os) (%btrfs-raid10-root-os): New variables. (%btrfs-raid10-root-installation-script): Likewise. (%test-btrfs-raid10-root-images): Likewise. (%test-btrfs-raid10-root-os, %test-btrfs-raid10-root-os-degraded): New tests. Maxim Cournoyer 2022-03-19tests: install: Enable the use of multiple disk devices for tests....* gnu/tests/install.scm (run-install)[packages]: Unconditionally add to OS. [NUMBER-OF-DISKS]: Add argument, update doc and adjust. The returned gexp output is now a list of images rather than the image itself. * gnu/tests/install.scm (qemu-command*): Rename IMAGE argument to IMAGES, to account for the above change. Adjust doc. Generate a QEMU '-drive' argument for each disk image. (%test-installed-os): Rename the IMAGE variable to IMAGES. (%test-installed-extlinux-os): Likewise. (%test-iso-image-installer): Likewise. (%test-separate-home-os): Likewise. (%test-separate-store-os): Likewise. (%test-raid-root-os): Likewise. (%test-encrypted-root-os): Likewise. (%test-lvm-separate-home-os): Likewise. (%test-encrypted-root-not-boot-os): Likewise. (%test-btrfs-root-os): Likewise. (%test-btrfs-raid-root-os): Likewise. (%test-btrfs-root-on-subvolume-os): Likewise. (%test-jfs-root-os): Likewise. (%test-f2fs-root-os): Likewise. (%test-xfs-root-os): Likewise. (guided-installation-test): Likewise. Maxim Cournoyer 2022-03-19tests: install: Streamline 'qemu-command/writable-image'....* gnu/tests/install.scm (qemu-command/writable-image): Replace the use of a writable backing file by the use of the '-snapshot' option, and rename to... (qemu-command*): ... this, adjusting all calls. Maxim Cournoyer 2021-12-28installer: Recommend 'ntp-service-type' for non-graphical systems....We had several bug reports with a root cause of "the clock was incorrect" from users who used the installer to install a non-graphical Guix System. * gnu/installer/services.scm (%system-services): Add the ntp-service-type. * gnu/installer/newt/services.scm (run-system-administration-cbt-page): New variable. (run-services-page): Use run-system-administration-cbt-page when not installing a desktop. * gnu/installer/tests.scm (choose-services): Add and use a choose-misc-service? procedure. * gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add ntp-service-type. Leo Famulari 2021-12-23Remove VM generation dead-code....This code duplicates the (gnu system image) and (gnu build image) code. Using VM for image generation is not needed, not portable and really slow. Remove all the VM image generation code to make sure that only the image API is used. * gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ... * gnu/build/marionette.scm: ... here. * gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it. * tests/modules.scm: Ditto. * gnu/tests/install.scm: Ditto. * gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm, qemu-img, system-qemu-image/shared-store and system-docker-image procedures. * doc/guix.texi (G-Expressions): Adapt it. Mathieu Othacehe 2021-12-01tests: install: Use the swap-space record....This fixes the following error: In gnu/services/base.scm: 2228:56 4 (_ #<<uuid> type: dce bv: #vu8(17 17 17 17 34 34 51 51 …>) In gnu/build/file-systems.scm: 239:13 3 (swap-space->flags-bit-mask #<<uuid> type: dce bv: #vu8…>) In ice-9/boot-9.scm: 1685:16 2 (raise-exception _ #:continuable? _) 1685:16 1 (raise-exception _ #:continuable? _) 1685:16 0 (raise-exception _ #:continuable? _) ice-9/boot-9.scm:1685:16: In procedure raise-exception: In procedure swap-space-priority: Wrong type argument: #<<uuid> type: dce bv: #vu8(17 17 17 17 34 34 51 51 68 68 18 52 86 120 154 188)> * gnu/tests/install.scm (installation-target-os-for-gui-tests): Use the swap-space record. Mathieu Othacehe 2021-11-23tests: Fix installation tests....Use a CEST timezone as this is the assumed timezone in the run-basic-test procedure. * gnu/tests/install.scm (%encrypted-root-not-boot-os, %btrfs-root-on-subvolume-os): Use a CEST timezone. Mathieu Othacehe 2021-10-18tests: Pass '-F qcow2' to 'qemu-img create'....Fixes a regression introduced in 0b5e128750ed40d4348f2eb49d328b81dba9181a, whereby 'qemu-img create ...' as used here would fail with: qemu-img: disk.img: Backing file specified without backing format thereby breaking tests from (gnu tests install). * gnu/tests/install.scm (qemu-command/writable-image): Pass "-F qcow2". Ludovic Courtès 2021-09-23tests: install: Test an XFS root file system....* gnu/tests/install.scm (%xfs-root-os, %xfs-root-os-source) (%xfs-root-installation-script, %test-xfs-root-os): New variables. Tobias Geerinckx-Rice 2021-08-29Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new 'targets' one instead. * doc/guix-cookbook.texi<target>: Replace by 'targets'. * gnu/bootloader/grub.scm: Likewise. * gnu/installer/parted.scm: Likewise. * gnu/machine/digital-ocean.scm: Likewise. * gnu/system/examples/asus-c201.tmpl: Likewise * gnu/system/examples/bare-bones.tmpl: Likewise * gnu/system/examples/bare-hurd.tmpl: Likewise * gnu/system/examples/beaglebone-black.tmpl: Likewise * gnu/system/examples/desktop.tmpl: Likewise * gnu/system/examples/docker-image.tmpl: Likewise * gnu/system/examples/lightweight-desktop.tmpl: Likewise * gnu/system/examples/vm-image.tmpl: Likewise * gnu/system/examples/yggdrasil.tmpl: Likewise * gnu/system/hurd.scm: Likewise * gnu/system/images/hurd.scm: Likewise * gnu/system/images/novena.scm: Likewise * gnu/system/images/pine64.scm: Likewise * gnu/system/images/pinebook-pro.scm: Likewise * gnu/system/images/rock64.scm: Likewise * gnu/system/install.scm: Likewise * gnu/system/vm.scm: Likewise * gnu/tests.scm: Likewise * gnu/tests/ganeti.scm: Likewise * gnu/tests/install.scm: Likewise * gnu/tests/nfs.scm: Likewise * gnu/tests/telephony.scm: Likewise * tests/boot-parameters.scm: Likewise * tests/system.scm: Likewise Maxim Cournoyer 2021-08-29gnu: bootloader: Support multiple targets....Fixes <https://issues.guix.gnu.org/40997>. * gnu/bootloader.scm (<bootloader-configuration>): New 'targets' field. (%bootloader-configuration-target): New procedure. (bootloader-configuration-target): Add deprecation warning. (bootloader-configuration-targets): New procedure. * guix/scripts/system.scm (install): Access targets via bootloader-configuration-targets. (perform-action)[bootloader-target]: Remove unused argument and update doc. Access targets via bootloader-configuration-targets and fix indentation. (process-action): Access targets via bootloader-configuration-targets. Do not provide the unused BOOTLOADER-TARGET argument when applying `perform-action'. * guix/scripts/system/reconfigure.scm (install-bootloader-program): Rename DEVICE argument to DEVICES. Adjust doc and comment. Apply `installer' and `disk-installer' for every DEVICES. (install-bootloader): Access targets via bootloader-configuration-targets and rename variable from DEVICE to DEVICES. * gnu/tests/install.scm: Adjust accordingly. * tests/guix-system.sh: Likewise. * gnu/tests/reconfigure.scm (run-install-bootloader-test): Adjust the DEVICES argument so that it is a list. * doc/guix.texi: Update doc. Maxim Cournoyer 2021-07-04installer: tests: Expect but do not select other services by default....* gnu/installer/tests.scm (choose-services): Accept a new choose-other-service? keyword argument, defaulting to false. Expect an "Other services" checkbox-list. Update docstring. Tobias Geerinckx-Rice