aboutsummaryrefslogtreecommitdiff
BranchCommit messageAuthorAge
koszkoAllow unauthorized `guix pull`W. Kosior4 months
koszko-scriptsAdd `koszko-vpn' branch.W. Kosior3 months
 
generated by cgit
users and groups before transforming them to specs and asserting, that names are unique. Leo Prikler 2021-01-20shadow: End duplicate warnings with new lines....The change from formatted message causes the line to no longer automatically be ended. This will need to be reverted once again, when duplicate names become hard errors. * gnu/system/shadow.scm (assert-unique-account-names) (assert-unique-group-names): End format strings in ~%. Leo Prikler 2021-01-13Reapply "system: Assert, that user and group names are unique."...* gnu/system/shadow.scm (assert-unique-account-names) (assert-unique-group-names): Demote formatted-message to warning. Leo Prikler 2021-01-12Revert "system: Assert, that user and group names are unique."...This reverts commit a3002104a84c60556b6616d100cb98019e48759d, which breaks certain system configurations like: $ guix system reconfigure config.scm guix system: error: the following groups appear more than once: lp Jonathan Brielmaier 2021-01-11system: Assert, that user and group names are unique....*gnu/system/shadow.scm (find-duplicates): New variable. (assert-unique-account-names, assert-unique-group-names): New variables. (account-activation): Use them here. Leo Prikler 2020-08-25Remove "guile-zlib" extension when unused....This is a follow-up of 755f365b02b42a5d1e8ef3000dadef069553a478. As (zlib) is autoloaded in (gnu build linux-modules), "guile-zlib" is needed as an extension only when it is effectively used. * gnu/installer.scm (installer-program): Remove "guile-zlib" from the extensions. * gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto. * gnu/services.scm (activation-script): Ditto. * gnu/services/base.scm (default-serial-port): Ditto, (agetty-shepherd-service): ditto, (udev-service-type): ditto. * gnu/system/image.scm (gcrypt-sqlite3&co): Ditto. * gnu/system/shadow.scm (account-shepherd-service): Ditto. Mathieu Othacehe 2020-08-25linux-libre: Support module compression....This commit adds support for GZIP compression for linux-libre kernel modules. The initrd modules are kept uncompressed as the initrd is already compressed as a whole. The linux-libre kernel also supports XZ compression, but as Guix does not have any available bindings for now, and the compression time is far more significant, GZIP seems to be a better option. * gnu/build/linux-modules.scm (modinfo-section-contents): Use 'call-with-gzip-input-port' to read from a module file using '.gz' extension, (strip-extension): new procedure, (dot-ko): adapt to support compression, (ensure-dot-ko): ditto, (file-name->module-name): ditto, (find-module-file): ditto, (load-linux-module*): ditto, (module-name->file-name/guess): ditto, (module-name-lookup): ditto, (write-module-name-database): ditto, (write-module-alias-database): ditto, (write-module-device-database): ditto. * gnu/installer.scm (installer-program): Add "guile-zlib" to the extensions. * gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto. * gnu/services.scm (activation-script): Ditto. * gnu/services/base.scm (default-serial-port): Ditto, (agetty-shepherd-service): ditto, (udev-service-type): ditto. * gnu/system/image.scm (gcrypt-sqlite3&co): Ditto. * gnu/system/linux-initrd.scm (flat-linux-module-directory): Add "guile-zlib" to the extensions and make sure that the initrd only contains uncompressed module files. * gnu/system/shadow.scm (account-shepherd-service): Add "guile-zlib" to the extensions. * guix/profiles.scm (linux-module-database): Ditto. Mathieu Othacehe 2020-05-08services: Add descriptions....* gnu/services/dbus.scm (polkit-service-type)[description]: New field. * gnu/services/dict.scm (dicod-service-type)[description]: New field. * gnu/services/dns.scm (knot-service-type)[description]: New field. * gnu/services/networking.scm (dhcpd-service-type)[description]: New field. * gnu/services/shepherd.scm (shepherd-root-service-type)[description]: New field. * gnu/services/xorg.scm (slim-service-type)[description]: New field. (screen-locker-service-type)[description]: New field. * gnu/system/pam.scm (pam-root-service-type)[description]: New field. * gnu/system/shadow.scm (account-service-type)[description]: New field. Ludovic Courtès 2020-04-17services: account: Have 'user-processes' depend on 'user-homes'....Until now, 'user-homes' happened to start right after 'user-processes' and before services that depend on a home directory but the dependency was not explicit. This addresses it. * gnu/system/shadow.scm (account-service-type): Extend USER-PROCESSES-SERVICE-TYPE. Ludovic Courtès 2020-04-01system: Move nanorc to XDG_CONFIG_HOME....* gnu/system/shadow.scm (skeleton-directory): Move .nanorc to .config/nano/nanorc. Efraim Flashner 2020-03-30Revert "system: Move nanorc to XDG_CONFIG_HOME."...This reverts commit bd71818df31364bbd04f3f13b3bbb251636748b4. This changed caused system reconfiguration to fail like this: ------ building /gnu/store/y1x8asbzw624ywgkpin35p1i4bqnyfy2-skel.drv... Backtrace: 4 (primitive-load "/gnu/store/2x7d0jsbgf2ndb5fsk0nj07rhsx?") In ice-9/eval.scm: 619:8 3 (_ #f) In ice-9/boot-9.scm: 260:13 2 (for-each #<procedure 7ffff6ad8100 at ice-9/eval.scm:3?> ?) In guix/build/utils.scm: 343:27 1 (_ "/gnu/store/ajrgkj1s9vdcq00drn703f4zj9dvfrsv-nanorc" ?) In unknown file: 0 (copy-file "/gnu/store/ajrgkj1s9vdcq00drn703f4zj9dvfrs?" ?) ERROR: In procedure copy-file: In procedure copy-file: No such file or directory `/gnu/store/v1grsca743phw41lyf63dzmh9nz5jlpn-bash_profile' -> `.bash_profile' `/gnu/store/xdsaw0mj6axj427hyi6ysrnsxi21n7d5-bashrc' -> `.bashrc' `/gnu/store/6i0b236dyar78zc5k5hrj5dv3vr4zb9w-zprofile' -> `.zprofile' `/gnu/store/ajrgkj1s9vdcq00drn703f4zj9dvfrsv-nanorc' -> `.config/nano/nanorc' builder for `/gnu/store/y1x8asbzw624ywgkpin35p1i4bqnyfy2-skel.drv' failed with exit code 1 ------ Leo Famulari 2020-03-30system: Move nanorc to XDG_CONFIG_HOME....* gnu/system/shadow.scm (default-skeletons): Move .nanorc to .config/nano/nanorc. Efraim Flashner 2020-03-19gnu: system: Remove guile-wm from skeleton....* gnu/system/shadow.scm (default-skeletons): Remove guile-wm (especially as a dependency). Jan Nieuwenhuizen 2019-04-23services: account: Make 'user-homes' a one-shot service....* gnu/system/shadow.scm (account-shepherd-service): Add 'one-shot?' field. Return #t from 'start'. Ludovic Courtès 2019-03-07activation: Build account databases with (gnu build accounts)....* gnu/build/activation.scm (enumerate, current-users, current-groups) (add-group, add-user, modify-user, ensure-user): Remove. (activate-users+groups)[touch, activate-user]: Remove. [make-home-directory]: New procedure. Rewrite in terms of 'user+group-databases', 'write-group', etc. * gnu/build/install.scm (directives): Remove "/root". * gnu/system/shadow.scm (account-activation): Remove (setenv "PATH" ...) expression, which is now unneeded. Ludovic Courtès 2019-03-07activation: Operate on <user-account> and <user-group> records....* gnu/system/accounts.scm (sexp->user-group, sexp->user-account): New procedures. * gnu/system/shadow.scm (account-activation): Call them in the arguments to 'activate-users+groups'. (account-shepherd-service): Likewise. * gnu/build/activation.scm (activate-users+groups): Expect a list of <user-account> and a list of <user-group>. Replace uses of 'match' on tuples with calls to record accessors. (activate-user-home): Likewise. Ludovic Courtès 2019-03-07system: Add (gnu system accounts)....The (gnu system accounts) module is meant to be used both on the build- and on the host-side. * gnu/system/shadow.scm <top level>: Call 'default-shell'. (<user-account>, <user-group>): Move to... * gnu/system/accounts.scm: ... here. New file. * gnu/local.mk (GNU_SYSTEM_MODULES): Add system/accounts.scm. Ludovic Courtès