| Age | Commit message (Expand) | Author |
|---|
| 2021-02-01 | build/python: Add a sanity check phase....Add a new phase validating the usability of installed Python packages.
* gnu/packages/aux-files/python/sanity-check.py: New file.
* Makefile.am (AUX_FILES): Register it.
* guix/build-system/python.scm (sanity-check.py): New variable.
(lower): Add the script as an implicit input.
* guix/build/python-build-system.scm: Remove trailing #t.
(sanity-check): New phase.
(%standard-phases): Use it.
* tests/builders.scm: (make-python-dummy)
(dummy-ok, dummy-dummy-nosetuptools, dummy-fail-requirements)
(dummy-fail-import, dummy-fail-console-script): New variables.
("python-build-system: dummy-ok")
("python-build-system: dummy-dummy-nosetuptools")
("python-build-system: dummy-fail-requirements")
("python-build-system: dummy-fail-import")
("python-build-system: dummy-fail-console-script"): Add tests.
| Lars-Dominik Braun |
| 2021-01-26 | build-systems/gnu: Allow unpacking/repacking more kind of files....Before this change, only plain directories, tar or zip archives were supported
as the source of a package for the GNU build system; anything else would cause
the unpack phase to fail. Origins relying on snippets would suffer from the
same problem.
This change adds the support to use files of the following extensions: .gz,
.Z, .bz2, .lz, and .xz, even when they are not tarballs. Files of unknown
extensions are treated as uncompressed files and supported as well.
* guix/packages.scm (patch-and-repack): Only add the compressor utility to the
PATH when the file is compressed. Bind more inputs in the mlet, and use them
for decompressing single files. Adjust the decompression and compression
routines.
[decompression-type]: Remove nested variable.
* guix/build/utils.scm (compressor, tarball?): New procedures. Move
%xz-parallel-args to the new 'compression helpers' section.
* tests/packages.scm: Add tests. Add missing copyright year for Jan.
* guix/build/gnu-build-system.scm (first-subdirectory): Return #f when no
sub-directory was found.
(unpack): Support more file types, including uncompressed plain files.
| Maxim Cournoyer |
| 2019-06-14 | tests: Remove expensive and pointless test....This test had become too expensive since the introduction of the reduced
bootstrap.
* tests/builders.scm ("gnu-build"): Remove.
(%bootstrap-inputs, %bootstrap-search-paths): Remove.
| Ludovic Courtès |
| 2018-09-22 | bootstrap: %bootstrap-inputs: Wrap input lists into thunks....* gnu/packages/bootstrap.scm (%bootstrap-inputs): Change to procedure. Update
users; prepares for Mes bootstrap.
* gnu/packages/commencement.scm (%boot0-inputs, %boot1-inputs, %boot2-inputs,
%boot3-inputs, %boot4-inputs, %boot5-inputs, %boot-6-inputs): Change to
procedure. Update users.
* tests/builders.scm (%bootstrap-inputs, %bootstrap-search-paths): Make a
procedure, filter on package?. Update users.
| Jan Nieuwenhuizen |
| 2018-09-04 | Switch to Guile-Gcrypt....This removes (guix hash) and (guix pk-crypto), which now live as part of
Guile-Gcrypt (version 0.1.0.)
* guix/gcrypt.scm, guix/hash.scm, guix/pk-crypto.scm,
tests/hash.scm, tests/pk-crypto.scm: Remove.
* configure.ac: Test for Guile-Gcrypt. Remove LIBGCRYPT and
LIBGCRYPT_LIBDIR assignments.
* m4/guix.m4 (GUIX_ASSERT_LIBGCRYPT_USABLE): Remove.
* README: Add Guile-Gcrypt to the dependencies; move libgcrypt as
"required unless --disable-daemon".
* doc/guix.texi (Requirements): Likewise.
* gnu/packages/bash.scm, guix/derivations.scm, guix/docker.scm,
guix/git.scm, guix/http-client.scm, guix/import/cpan.scm,
guix/import/cran.scm, guix/import/crate.scm, guix/import/elpa.scm,
guix/import/gnu.scm, guix/import/hackage.scm,
guix/import/texlive.scm, guix/import/utils.scm, guix/nar.scm,
guix/pki.scm, guix/scripts/archive.scm,
guix/scripts/authenticate.scm, guix/scripts/download.scm,
guix/scripts/hash.scm, guix/scripts/pack.scm,
guix/scripts/publish.scm, guix/scripts/refresh.scm,
guix/scripts/substitute.scm, guix/store.scm,
guix/store/deduplication.scm, guix/tests.scm, tests/base32.scm,
tests/builders.scm, tests/challenge.scm, tests/cpan.scm,
tests/crate.scm, tests/derivations.scm, tests/gem.scm,
tests/nar.scm, tests/opam.scm, tests/pki.scm,
tests/publish.scm, tests/pypi.scm, tests/store-deduplication.scm,
tests/store.scm, tests/substitute.scm: Adjust imports.
* gnu/system/vm.scm: Likewise.
(guile-sqlite3&co): Rename to...
(gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT.
(expression->derivation-in-linux-vm)[config]: Remove.
(iso9660-image)[config]: Remove.
(qemu-image)[config]: Remove.
(system-docker-image)[config]: Remove.
* guix/scripts/pack.scm: Adjust imports.
(guile-sqlite3&co): Rename to...
(gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT.
(self-contained-tarball)[build]: Call 'make-config.scm' without
#:libgcrypt argument.
(squashfs-image)[libgcrypt]: Remove.
[build]: Call 'make-config.scm' without #:libgcrypt.
(docker-image)[config, json]: Remove.
[build]: Add GUILE-GCRYPT to the extensions Remove (guix config) from
the imported modules.
* guix/self.scm (specification->package): Remove "libgcrypt", add
"guile-gcrypt".
(compiled-guix): Remove #:libgcrypt.
[guile-gcrypt]: New variable.
[dependencies]: Add it.
[*core-modules*]: Remove #:libgcrypt from 'make-config.scm' call.
Add #:extensions.
[*config*]: Remove #:libgcrypt from 'make-config.scm' call.
(%dependency-variables): Remove %libgcrypt.
(make-config.scm): Remove #:libgcrypt.
* build-aux/build-self.scm (guile-gcrypt): New variable.
(make-config.scm): Remove #:libgcrypt.
(build-program)[fake-gcrypt-hash]: New variable.
Add (gcrypt hash) to the imported modules. Adjust load path
assignments.
* gnu/packages/package-management.scm (guix)[propagated-inputs]: Add
GUILE-GCRYPT.
[arguments]: In 'wrap-program' phase, add GUILE-GCRYPT to the search
path.
| Ludovic Courtès |
| 2016-04-03 | build: Add a Guile custom test driver using SRFI-64....Before that '.log' files for scheme tests were fragmented and not
included in test-suite.log. This unifies the semantics of SRFI-64 API
with Automake test suite.
* build-aux/test-driver.scm: New file.
* Makefile.am (SCM_LOG_DRIVER, AM_SCM_LOG_DRIVER_FLAGS): New variables.
(SCM_LOG_COMPILER, AM_SCM_LOG_FLAGS): Delete variables.
(AM_TESTS_ENVIRONMENT): Set GUILE_AUTO_COMPILE to 0.
* test-env.in: Silence guix-daemon.
* doc/guix.texi (Running the Test Suite): Describe how to display the
detailed results. Bug reports require only 'test-suite.log' file.
* tests/base32.scm, tests/build-utils.scm, tests/builders.scm,
tests/challenge.scm, tests/cpan.scm, tests/cpio.scm, tests/cran.scm,
tests/cve.scm, tests/derivations.scm, tests/elpa.scm,
tests/file-systems.scm, tests/gem.scm, tests/gexp.scm,
tests/gnu-maintenance.scm, tests/grafts.scm, tests/graph.scm,
tests/gremlin.scm, tests/hackage.scm, tests/hash.scm,
tests/import-utils.scm, tests/lint.scm, tests/monads.scm, tests/nar.scm,
tests/packages.scm, tests/pk-crypto.scm, tests/pki.scm,
tests/profiles.scm, tests/publish.scm, tests/pypi.scm,
tests/records.scm, tests/scripts-build.scm, tests/scripts.scm,
tests/services.scm, tests/sets.scm, tests/size.scm, tests/snix.scm,
tests/store.scm, tests/substitute.scm, tests/syscalls.scm,
tests/system.scm, tests/ui.scm, tests/union.scm, tests/upstream.scm,
tests/utils.scm: Don't exit at the end of test groups.
* tests/containers.scm: Likewise. Use 'test-skip' instead of exiting
with error code 77.
| Mathieu Lirzin |
| 2015-02-24 | tests: Skip tests that would fail due to the shebang length....Reported by Daniel Kochmański <dkochmanski@hellsgate.pl>.
Fixes <http://bugs.gnu.org/19888>.
* guix/tests.scm (shebang-too-long?): New procedure.
* tests/builders.scm ("gnu-build"): Conditionalize on
not (shebang-too-long?).
* tests/packages.scm ("GNU Make, bootstrap"): Likewise.
* tests/guix-package.sh (shebang_not_too_long): New function.
Use it to determine whether to build 'gnu-make-boot0'.
| Ludovic Courtès |
| 2015-02-24 | tests: Factorize the network reachability test....* guix/tests.scm (network-reachable?): New procedure.
* tests/builders.scm (network-reachable?): Remove.
Replace references to it with calls to the new 'network-reachable?'
procedure.
* tests/derivations.scm (%coreutils): Use 'network-reachable?' instead
of 'getaddrinfo'.
* tests/packages.scm: Likewise.
* tests/union.scm: Likewise.
| Ludovic Courtès |
| 2015-01-14 | packages: Convert source derivations to monadic style....* guix/packages.scm (origin->derivation): Take body from
'package-source-derivation', and change it to monadic style. Expect
METHOD to a monadic procedure.
(package-source-derivation): Define in terms of 'origin->derivation'.
* guix/download.scm (url-fetch): Remove 'store' argument. Remove
'guile-for-build' variable. Turn into a monadic procedure.
* guix/git-download.scm (git-fetch): Likewise.
* guix/svn-download.scm (svn-fetch): Likewise.
* tests/builders.scm (url-fetch*): New procedure.
Change tests to call 'url-fetch*' instead of 'url-fetch'.
* tests/packages.scm ("package-source-derivation, snippet"): Remove
'store' parameter of 'fetch' and change it to use 'interned-file'
instead of 'add-to-store'.
* gnu/packages/bootstrap.scm (bootstrap-origin)[boot]: Remove 'store'
parameter.
| Ludovic Courtès |
| 2014-10-05 | build-system: Introduce "bags" as an intermediate representation....* guix/build-system.scm (<build-system>)[build, cross-build]: Remove.
[lower]: New field.
(<bag>): New record type.
(make-bag): New procedure.
* guix/packages.scm (bag-transitive-inputs, bag-transitive-build-inputs,
bag-transitive-host-inputs, bag-transitive-target-inputs,
package->bag): New procedures.
(package-derivation): Use it; use the bag, apply its build procedure,
etc.
(package-cross-derivation): Likewise.
* gnu/packages/bootstrap.scm (raw-build, make-raw-bag): New procedure.
(%bootstrap-guile): Use them.
* guix/build-system/trivial.scm (lower): New procedure.
(trivial-build, trivial-cross-build): Remove 'source' parameter. Pass
INPUTS as is.
(trivial-build-system): Adjust accordingly.
* guix/build-system/gnu.scm (%store, inputs-search-paths,
standard-search-paths, expand-inputs, standard-inputs): Remove.
(gnu-lower): New procedure.
(gnu-build): Remove 'source' and #:implicit-inputs? parameters.
Remove 'implicit-inputs' and 'implicit-search-paths' variables. Get
the source from INPUT-DRVS.
(gnu-cross-build): Likewise.
(standard-cross-packages): Remove call to 'standard-packages'.
(standard-cross-inputs, standard-cross-search-paths): Remove.
(gnu-build-system): Remove 'build' and 'cross-build'; add 'lower'.
* guix/build-system/cmake.scm (lower): New procedure.
(cmake-build): Remove 'source' and #:cmake parameters. Use INPUTS and
SEARCH-PATHS as is. Get the source from INPUTS.
* guix/build-system/perl.scm: Likewise.
* guix/build-system/python.scm: Likewise.
* guix/build-system/ruby.scm: Likewise.
* gnu/packages/cross-base.scm (cross-gcc): Change "cross-linux-headers"
to "linux-headers".
(cross-libc)[xlinux-headers]: Pass #:implicit-cross-inputs? #f.
Likewise. In 'propagated-inputs', change "cross-linux-headers" to
"linux-headers".
* guix/git-download.scm (git-fetch): Use 'standard-packages' instead of
'standard-inputs'.
* tests/builders.scm ("gnu-build-system"): Remove use of
'build-system-builder'.
("gnu-build"): Remove 'source' and #:implicit-inputs? arguments to
'gnu-build'.
* tests/packages.scm ("search paths"): Adjust to new build system API.
("package-cross-derivation, no cross builder"): Likewise.
* doc/guix.texi (Build Systems): Add paragraph on bags.
| Ludovic Courtès |
| 2014-10-03 | download: Allow raw file names or file:// URLs....* guix/download.scm (url-fetch): When URL is a string, if it's not a URI
or if it's a URI with 'file' or #f scheme, use 'add-to-store'.
* tests/builders.scm ("url-fetch, file", "url-fetch, file URI"): New
tests.
| Ludovic Courtès |
| 2014-08-28 | gnu: Split (gnu packages base), adding (gnu packages commencement)....* gnu/packages/base.scm (gnu-make-boot0, diffutils-boot0,
findutils-boot0, %boot0-inputs, nix-system->gnu-triplet, boot-triplet,
binutils-boot0, gcc-boot0, perl-boot0, linux-libre-headers-boot0,
texinfo-boot0, %boot1-inputs, glibc-final-with-bootstrap-bash,
cross-gcc-wrapper, static-bash-for-glibc, glibc-final,
gcc-boot0-wrapped, %boot2-inputs, binutils-final, libstdc++,
gcc-final, ld-wrapper-boot3, %boot3-inputs, bash-final, %boot4-inputs,
guile-final, gnu-make-final, ld-wrapper, coreutils-final, grep-final,
%boot5-inputs, %final-inputs, canonical-package, gcc-toolchain,
gcc-toolchain-4.8, gcc-toolchain-4.9): Move to...
* gnu/packages/commencement.scm: ... here. New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* build-aux/check-final-inputs-self-contained.scm: Adjust accordingly.
* gnu/packages/cross-base.scm: Likewise.
* gnu/packages/make-bootstrap.scm: Likewise.
* guix/build-system/cmake.scm (cmake-build): Likewise.
* guix/build-system/gnu.scm (standard-packages, gnu-build,
gnu-cross-build): Likewise.
* guix/build-system/perl.scm (perl-build): Likewise.
* guix/build-system/python.scm (python-build): Likewise.
* guix/build-system/trivial.scm (guile-for-build): Likewise.
* guix/download.scm (url-fetch): Likewise.
* guix/gexp.scm (default-guile): Likewise.
* guix/git-download.scm (git-fetch): Likewise.
* guix/monads.scm (run-with-store): Likewise.
* guix/packages.scm (default-guile): Likewise.
* guix/scripts/package.scm (guix-package): Likewise.
* guix/scripts/refresh.scm: Likewise.
* guix/svn-download.scm (svn-fetch): Likewise.
* tests/builders.scm (%bootstrap-inputs, %bootstrap-search-paths):
Likewise.
* tests/packages.scm ("GNU Make, bootstrap"): Likewise.
* tests/guix-package.sh: Likewise.
* gnu/services/base.scm: Use 'canonical-package' instead of xxx-final.
* gnu/services/xorg.scm: Likewise.
* gnu/system/vm.scm: Likewise.
* guix/scripts/pull.scm (guix-pull): Likewise.
| Ludovic Courtès |
| 2014-08-23 | Factorize test suite support in (guix tests)....* guix/tests.scm: New file.
* Makefile.am (noinst_DATA): New variable.
(GOBJECTS): Add guix/tests.go.
* tests/builders.scm (%store): Use 'open-connection-for-tests'
from (guix tests).
* tests/derivations.scm: Likewise.
* tests/monads.scm: Likewise.
* tests/packages.scm: Likewise.
* tests/profiles.scm: Likewise.
* tests/union.scm: Likewise.
* tests/gexp.scm: Likewise.
(guile-for-build): Remove. Use (%guile-for-build) instead.
* tests/nar.scm (make-random-bytevector, %seed, random-text): Remove.
(populate-file): Change 'make-random-bytevector' to 'random-bytevector'.
Use (guix tests).
* tests/store.scm (%seed, random-text): Remove.
Use (guix tests).
| Ludovic Courtès |
| 2013-09-18 | derivations: 'derivation' and related procedures return a single value....* guix/derivations.scm (derivation->output-path,
derivation->output-paths): New procedures.
(derivation-path->output-path): Use 'derivation->output-path'.
(derivation-path->output-paths): Use 'derivation->output-paths'.
(derivation): Accept 'derivation?' objects as inputs. Return a single
value.
(build-derivations): New procedure.
(compiled-modules): Use 'derivation->output-paths'.
(build-expression->derivation)[source-path]: Add case for when the
input matches 'derivation?'.
[prologue]: Accept 'derivation?' objects in INPUTS.
[mod-dir, go-dir]: Use 'derivation->output-path'.
* guix/download.scm (url-fetch): Adjust to the single-value return.
* guix/packages.scm (package-output): Use 'derivation->output-path'.
* guix/scripts/build.scm (guix-build): When the argument is
'derivation-path?', pass it through 'read-derivation'.
Use 'derivation-file-name' to print out the .drv file names, and to
register them. Use 'derivation->output-path' instead of
'derivation-path->output-path'.
* guix/scripts/package.scm (roll-back): Adjust to the single-value
return.
(guix-package): Use 'derivation->output-path'.
* guix/ui.scm (show-what-to-build): Adjust to deal with 'derivation?'
objects instead of .drv file names.
* gnu/system/grub.scm (grub-configuration-file): Use
'derivation->output-path' instead of 'derivation-path->output-path'.
* gnu/system/vm.scm (qemu-image, system-qemu-image): Likewise.
* tests/builders.scm, tests/derivations.scm, tests/packages.scm,
tests/store.scm, tests/union.scm: Adjust to the new calling
convention.
* doc/guix.texi (Defining Packages, The Store, Derivations): Adjust
accordingly.
| Ludovic Courtès |
| 2013-04-11 | tests: Adjust `gnu-build' test to search path mechanism....Fixes a regression introduced in a18eda2.
Reported by Nikita Karetnikov <nikita@karetnikov.org>.
* tests/builders.scm (%bootstrap-search-paths): New variable.
("gnu-build"): Pass #:search-paths.
| Ludovic Courtès |
| 2013-02-01 | Augment `.dir-locals.el'....* .dir-locals.el: Add more Scheme settings.
* guix-build.in, tests/base32.scm, tests/build-utils.scm,
tests/builders.scm, tests/derivations.scm, tests/packages.scm,
tests/snix.scm, tests/store.scm, tests/union.scm, tests/utils.scm:
Remove redundant Emacs local variable settings.
| Ludovic Courtès |
| 2013-01-18 | distro: Change the module name space to (gnu ...)....* distro: Rename to...
* gnu: ... this. Update module names accordingly.
* Makefile.am: Adjust accordingly.
* po/POTFILES.in: Likewise.
* distro.scm: Search for files under /gnu/packages instead of
/distro/packages.
* gnu/packages/base.scm (ld-wrapper-boot3): Likewise.
| Ludovic Courtès |
| 2013-01-06 | Update license headers....Change all license headers, except guix/build/* and ld-wrapper.scm, with
this code:
(use-modules (guix build utils)
(srfi srfi-1))
(fluid-set! %default-port-encoding "UTF-8")
(substitute* (remove (lambda (f)
(or (string-contains f ".tar.")
(string-contains f ".git/")
(string-contains f ".so")
(string-suffix? ".o" f)
(string-suffix? ".a" f)
(string-suffix? ".go" f)
(string-suffix? ".pdf" f)
(string-suffix? ".png" f)
(string-suffix? ".info" f)
(equal? (basename f) "guix-daemon")
(equal? (basename f) "nix-setuid-helper")
(string-contains f "nix-upstream/")
(string-contains f "distro/packages/bootstrap/")))
(find-files "." "\\.[a-z]+$"))
(("^([[:graph:]]+) This file is part of Guix." _ comment-start)
(string-append comment-start " This file is part of GNU Guix."))
(("^([[:graph:]]+) Guix --- Nix package management.*" _ comment-start)
(string-append comment-start
" GNU Guix --- Functional package management for GNU\n"))
(("^([[:graph:]]+) Guix is " _ comment-start)
(string-append comment-start " GNU Guix is "))
(("^([[:graph:]]+) along with Guix." _ comment-start)
(string-append comment-start " along with GNU Guix."))
(("^([[:graph:]]+) Copyright \\(C\\)" _ comment-start)
(string-append comment-start " Copyright ©")))
Change headers using C-style comments manually.
| Ludovic Courtès |
| 2012-12-13 | tests: Skip network-dependent tests when the network is unreachable....* tests/builders.scm (network-reachable?): New variable.
("url-fetch", "gnu-build"): Skip unless NETWORK-REACHABLE?.
* tests/derivations.scm (%coreutils): Check for network access.
("build-expression->derivation with one input"): Skip when %COREUTILS
is #f.
* tests/guix-package.sh: Skip installation of GNU Make when the network
is unreachable.
* tests/packages.scm ("GNU Make, bootstrap"): Likewise.
* tests/union.scm ("union-build"): Likewise.
| Ludovic Courtès |
| 2012-11-13 | tests: Make sure to use the bootstrap Guile....* tests/builders.scm ("url-fetch", "gnu-build"): Pass `url-fetch'
#:guile %BOOTSTRAP-GUILE.
| Ludovic Courtès |
| 2012-11-13 | Remove (guix http) and (guix ftp)....* guix/ftp.scm, guix/http.scm, guix/build/ftp.scm, guix/build/http.scm:
Remove.
* Makefile.am (MODULES): Likewise.
* tests/builders.scm, distro/packages/base.scm,
distro/packages/bash.scm, distro/packages/bdw-gc.scm,
distro/packages/compression.scm, distro/packages/gawk.scm,
distro/packages/gnupg.scm, distro/packages/gperf.scm,
distro/packages/guile.scm, distro/packages/libffi.scm,
distro/packages/libsigsegv.scm, distro/packages/libtool.scm,
distro/packages/libunistring.scm, distro/packages/lout.scm,
distro/packages/m4.scm, distro/packages/multiprecision.scm,
distro/packages/ncurses.scm, distro/packages/perl.scm,
distro/packages/pkg-config.scm, distro/packages/pth.scm,
distro/packages/readline.scm, distro/packages/recutils.scm: Use
`url-fetch' instead of `http-fetch' and `ftp-fetch'.
* distro/packages/bootstrap.scm: Likewise
(bootstrap-origin): Remove references to `http-fetch' and
`ftp-fetch'.
* guix.scm (%public-modules): Remove `http' and `ftp'; add `download'.
| Ludovic Courtès |
| 2012-11-12 | Add (guix download) and (guix build download)....* guix/download.scm, guix/build/download.scm: New files.
* Makefile.am (MODULES): Add them.
* tests/builders.scm ("url-fetch"): New test.
* distro/packages/bootstrap.scm (bootstrap-origin): Support
`url-fetch'.
* guix/snix.scm (snix-derivation->guix-package): Use `url-fetch' instead
of `http-fetch'.
| Ludovic Courtès |
| 2012-11-11 | Move base32 code to (guix base32)....* guix/utils.scm (bytevector-quintet-ref, bytevector-quintet-ref-right,
bytevector-quintet-length, bytevector-quintet-fold,
bytevector-quintet-fold-right, make-bytevector->base32-string,
%nix-base32-chars, %rfc4648-base32-chars, bytevector->base32-string,
bytevector->nix-base32-string, bytevector-quintet-set!,
bytevector-quintet-set-right!, base32-string-unfold,
base32-string-unfold-right, make-base32-string->bytevector,
base32-string->bytevector, nix-base32-string->bytevector): Move to...
* guix/base32.scm: ... here. New file.
* tests/utils.scm (%nix-hash, "bytevector->base32-string",
"base32-string->bytevector", "nix-base32-string->bytevector", "sha256
& bytevector->base32-string"): Move to...
* tests/base32.scm: ... here. New file
* guix-download.in, guix/derivations.scm, guix/packages.scm,
guix/snix.scm, tests/builders.scm, tests/derivations.scm: Adjust
accordingly.
* guix.scm (%public-modules): Add `base32'.
| Ludovic Courtès |
| 2012-11-04 | distro: Move bootstrap packages to (distro packages bootstrap)....* distro/packages/base.scm (glibc-dynamic-linker, %bootstrap-guile,
bootstrap-origin, package-from-tarball, %bootstrap-base-url,
%bootstrap-coreutils&co, %bootstrap-binutils, %bootstrap-glibc,
%bootstrap-gcc, %bootstrap-inputs, package-with-bootstrap-guile): Move
to ...
* distro/packages/bootstrap.scm: ... here. New file.
* Makefile.am (MODULES): Add it.
* tests/builders.scm: Use (distro packages bootstrap).
(%bootstrap-guile): Remove.
* tests/packages.scm: Likewise.
* tests/union.scm: Likewise, and remove @@ to access %bootstrap-inputs.
* tests/derivations.scm: Use (distro packages bootstrap) and remove @@
to access %bootstrap-coreutils&co.
* HACKING (When the platform is supported by Nixpkgs): Update
accordingly.
| Ludovic Courtès |
| 2012-11-02 | tests: Run without substitutes....* tests/builders.scm, tests/derivations.scm, tests/packages.scm: Set
#:use-substitutes? #f for %STORE.
| Ludovic Courtès |
| 2012-10-28 | tests: Use our own bootstrap tools....* tests/builders.scm (%bootstrap-inputs): Use %BOOT0-INPUTS from the distro.
* tests/packages.scm (%bootstrap-inputs): Likewise.
* tests/derivations.scm (%coreutils): Alias for %BOOTSTRAP-COREUTILS&CO.
| Ludovic Courtès |
| 2012-10-07 | tests: Use bootstrap and Nixpkgs inputs to be less costly....* tests/builders.scm (%bootstrap-inputs, %bootstrap-guile): New
variables.
("gnu-build"): Use them, by setting `#:implicit-inputs? #f' and `#:guile'.
* tests/packages.scm (%bootstrap-inputs, %bootstrap-guile): New
variables.
("trivial"): Pass `#:guile %bootstrap-guile'.
("GNU Hello"): Use `package-with-explicit-inputs' to use
%BOOTSTRAP-GUILE and %BOOTSTRAP-INPUTS.
| Ludovic Courtès |
| 2012-07-01 | Add the `valid-path?' RPC....* guix/store.scm (valid-path?): New procedure.
* tests/builders.scm ("http-fetch", "gnu-build"): Use it.
* tests/derivations.scm ("add-to-store, flat", "add-to-store,
recursive", "derivation with no inputs", "build derivation with 1
source", "build derivation with coreutils",
"build-expression->derivation with expression returning #f"):
Likewise.
| Ludovic Courtès |
| 2012-06-27 | Abstract build systems....* Makefile.am (MODULES): Add `guix/build-system.scm' and
`guix/build-system/gnu.scm'. Remove `guix/gnu-build-system.scm'.
* guix/build-system.scm: New file.
* guix/gnu-build-system.scm: Rename to...
* guix/build-system/gnu.scm: ... this.
(gnu-build-system): New variable.
* tests/builders.scm: Adjust `use-module' clauses.
("gnu-build-system"): New test.
| Ludovic Courtès |
| 2012-06-13 | Change `build-expression->derivation' to support sub-derivation inputs....* guix/derivations.scm (build-expression->derivation): Change to expect
INPUTS to have the form (NAME DRV-PATH SUB-DRV) or (NAME DRV-PATH),
instead of (NAME . DRV-PATH). Update callers accordingly.
* guix/gnu-build-system.scm, tests/builders.scm, tests/derivations.scm:
Update accordingly.
| Ludovic Courtès |
| 2012-06-13 | Add supporting tools for the GNU Build System....* guix/derivations.scm (build-expression->derivation): Add all of INPUTS
as inputs to the final derivation.
* guix/build/gnu-build-system.scm, guix/build/utils.scm,
guix/gnu-build-system.scm: New files.
* tests/builders.scm ("gnu-build"): New test.
| Ludovic Courtès |
| 2012-06-12 | Augment `build-expression->derivation' with #:modules; add `http-fetch'....* guix/derivations.scm (imported-modules): New procedure.
(build-expression->derivation): New keyword argument `modules'.
Use `imported-modules' when MODULES is non-empty, and pass it with
`-L' to GUILE.
* guix/build/http.scm, guix/http.scm, tests/builders.scm: New files.
| Ludovic Courtès |
