| Age | Commit message (Expand) | Author |
|---|
| 2020-06-27 | daemon: Recognize SHA3 and BLAKE2s....* nix/libutil/hash.hh (HashType): Add htSHA3_256, htSHA3_512, and
htBLAKE2s_256.
* nix/libutil/hash.cc (parseHashType, printHashType): Recognize them.
* tests/store.scm ("add-to-store"): Test these algorithms.
| Ludovic Courtès |
| 2020-06-27 | daemon: Remove OpenSSL hash compatibility wrappers....* nix/libutil/hash.cc (struct Ctx): Copy from gcrypt-hash.hh.
(start, update, finish): Use gcrypt functions directly instead of
OpenSSL-like wrappers.
* nix/libutil/gcrypt-hash.cc, nix/libutil/gcrypt-hash.hh,
nix/libutil/md5.h, nix/libutil/sha1.h, nix/libutil/sha256.h,
nix/libutil/sha512.h: Remove.
* nix/local.mk (libutil_a_SOURCES, libutil_headers): Adjust
accordingly.
| Ludovic Courtès |
| 2020-06-27 | daemon: Map directly to gcrypt hash functions....* nix/libutil/hash.hh (HashType): Map directly to GCRY_MD_ values.
(md5HashSize, sha1HashSize, sha256HashSize, sha512HashSize): Remove.
* nix/libutil/hash.cc (Hash::Hash): Use 'gcry_md_get_algo_dlen'.
| Ludovic Courtès |
| 2020-06-25 | daemon: Correctly handle EMLINK corner case when deduplicating....Suggested by Caleb Ristvedt <caleb.ristvedt@cune.org>.
* nix/libstore/optimise-store.cc (LocalStore::optimisePath_): Save errno
from 'rename' before calling 'unlink'.
| Ludovic Courtès |
| 2020-06-24 | nix: Tweak .gitignore files....Remove .gitignore entries where they match source files that are tracked in
Git. This is relevant to me at least, as some code searching tools use
.gitignore files and will ignore matched files.
| Christopher Baines |
| 2020-06-06 | daemon: Handle EXDEV when moving to trash directory....Fixes <https://bugs.gnu.org/41607>.
Reported by Stephen Scheck <singularsyntax@gmail.com>.
* nix/libstore/gc.cc (LocalStore::deletePathRecursive): When we try to
move a dead directory into the trashDir using rename(2) but it returns
an EXDEV error, just delete the directory instead. This can happen in a
Docker container when the directory is not on the "top layer".
| Chris Marusich |
| 2020-05-23 | build: Add a comment above the sysvinit section....* nix/local.mk (sysvinitservicedir): Add a comment.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
| Vincent Legoll |
| 2020-05-17 | etc: Install mount unit only if it exists....This follows up on 1a1faa78b0498fbb71f1533beb4b65817c1d3f2a, and avoids
the (non-fatal) error seen in <https://issues.guix.gnu.org/41356>.
/gnu/store will remain writable on new foreign distribution
installations until the next release.
* etc/guix-install.sh (sys_enable_guix_daemon): Check for
‘gnu-store.mount’ presence before trying to cp it.
Update forgotten copyright header.
| Tobias Geerinckx-Rice |
| 2020-05-16 | etc: Add a systemd unit to bind-mount @storedir@ read-only....* etc/gnu-store.mount.in: New file.
* nix/local.mk (nodist_systemdservice_DATA): Add it.
(etc/%.mount): New rule for it.
* etc/guix-install.sh (sys_enable_guix_daemon): Install it.
* doc/guix.texi (Binary Installation): Document it.
* .gitignore: Ignore changes to it.
| Tobias Geerinckx-Rice |
| 2020-03-26 | daemon: Avoid kill -1 bug on the Hurd....This allows for native builds on the Hurd, doing
sudo ./pre-inst-env guix-daemon --disable-chroot --build-users-group=guixbuild &
./pre-inst-env guix build hello
* nix/libutil/util.cc (killUser)[__GNU__]: Avoid kill -1 bug; kill only
current process and ignore SIGKILL status in parent.
Co-authored-by: Jan Nieuwenhuizen <janneke@gnu.org>
| Manolis Ragkousis |
| 2020-03-26 | daemon: Do not use clone on the Hurd....Checking for CLONE_NEWNS is only needed for using tha Linux specific clone(2),
otherwise we can use fork(2). Using clone on the Hurd needs some work, only
support LINUX for now. See
https://lists.gnu.org/archive/html/guix-devel/2020-03/msg00190.html
* nix/libstore/build.cc (CHROOT_ENABLED): Break into CHROOT_ENABLED
and CLONE_ENABLED.
(DerivationGoal::startBuilder): Replace CHROOT_ENABLED with __linux__.
(DerivationGoal::runChild): Only define pivot_root() if SYS_pivot_root is
defined.
Co-authored-by: Jan Nieuwenhuizen <janneke@gnu.org>
| Manolis Ragkousis |
| 2020-03-11 | Add system start-up files for guix-daemon....* etc/init.d/guix-daemon.in: New file.
* nix/local.mk (etc/init.d/guix-daemon): New rule.
(nodist_sysvinitservice_DATA): Add etc/init.d/guix-daemon.in .
(CLEANFILES): Add etc/init.d/guix-daemon .
* .gitignore: Add etc/init.d/guix-daemon .
| Danny Milosavljevic |
| 2020-02-26 | daemon: Drop 'AT_STATX_DONT_SYNC' flag upon EINVAL....Fixes <https://bugs.gnu.org/39727>.
Reported by Paul Garlick <pgarlick@tourbillion-technology.com>.
* nix/libstore/gc.cc (LocalStore::removeUnusedLinks) [HAVE_STATX]: Add
'statx_flags' static variables. Clear 'AT_STATX_DONT_SYNC' flag from
'statx_flags' when 'statx' returns EINVAL.
| Ludovic Courtès |
| 2020-01-12 | daemon: Fix the displayed GC estimated progress....* nix/libstore/gc.cc (LocalStore::deletePathRecursive): Fix computation
of 'fraction'. Take 'bytesInvalidated' into account.
| Ludovic Courtès |
| 2020-01-12 | daemon: Account for deleted store files when deduplication is on....Previously, a store item that is a regular file would not be accounted
for in the 'bytesFreed' value computed by 'deletePath' because its
'st_nlink' count would always be >= 2. This commit fixes that.
* nix/libutil/util.hh (deletePath): Add optional 'linkThreshold' argument.
* nix/libutil/util.cc (_deletePath): Add 'linkThreshold' argument and
honor it. Pass it down in recursive call.
(deletePath): Add 'linkThreshold' and honor it.
* nix/libstore/gc.cc (LocalStore::deleteGarbage): Pass 'linkThreshold'
argument to 'deletePath', with a value of 2 when PATH is a store item
and deduplication is on.
| Ludovic Courtès |
| 2019-11-29 | daemon: 'pathExists' uses 'statx' when available....* nix/libutil/util.cc (pathExists) [HAVE_STATX]: New code.
| Ludovic Courtès |
| 2019-11-27 | daemon: 'deletePath' uses 'statx' when available....* nix/libutil/util.cc (_deletePath) [HAVE_STATX]: Use 'statx'.
| Ludovic Courtès |
| 2019-11-27 | daemon: GC remove-unused-links phase uses 'statx' when available....* config-daemon.ac: Check for 'statx'.
* nix/libstore/gc.cc (LocalStore::removeUnusedLinks) [HAVE_STATX]: Use
'statx' instead of 'lstat'.
| Ludovic Courtès |
| 2019-11-26 | daemon: boost::format: Fix typo "referred"....* nix/boost/format/exceptions.hpp (too_few_args): Fix typo.
(too_many_args): Fix typo.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Vagrant Cascadian |
| 2019-11-26 | guix build, daemon: Rename "--no-build-hook" to "--no-offload"....This is a followup to bc69ea2d605810cc32e13ed03d5848b8dc358b61.
* guix/scripts/build.scm (show-build-options-help): Rename
"--no-build-hook" to "--no-offload".
(%standard-build-options): Likewise, and warn when "--no-build-hook" is
passed.
* nix/nix-daemon/guix-daemon.cc (options): Add "--no-offload" and mark
"--no-build-hook" as hidden.
* guix/scripts/offload.scm: Adjust comment.
* doc/guix.texi (Invoking guix-daemon, Common Build Options): Replace
"--no-build-hook" with "--no-offload".
* etc/completion/fish/guix.fish, etc/completion/zsh/_guix: Adjust
accordingly.
| Ludovic Courtès |
| 2019-11-22 | daemon: GC displays how much it has collected....* nix/libstore/gc.cc (LocalStore::deletePathRecursive): Display the
percentage reached relative to 'maxFreed', or the total amount of data
deleted when 'maxFreed' is ULLONG_MAX.
| Ludovic Courtès |
| 2019-11-13 | daemon: Don't include <linux/fs.h>....As of GNU libc 2.29, <sys/mount.h> declares all the constants and
functions we need, so there's no use in including <linux/fs.h> anymore.
This silences annoying warnings like this one:
In file included from nix/libstore/local-store.cc:32:0:
/gnu/store/…-linux-libre-headers-4.19.56/include/linux/fs.h:108:0: warning: "MS_RDONLY" redefined
#define MS_RDONLY 1 /* Mount read-only */
In file included from nix/libstore/local-store.cc:28:0:
/gnu/store/…-glibc-2.29/include/sys/mount.h:36:0: note: this is the location of the previous definition
#define MS_RDONLY MS_RDONLY
* config-daemon.ac: Remove check for <linux/fs.h>.
* nix/libstore/build.cc: Remove conditional inclusion of <linux/fs.h>.
* nix/libstore/local-store.cc: Remove "#if HAVE_LINUX_FS_H" and
inclusion of <linux/fs.h>.
| Ludovic Courtès |
| 2019-11-04 | daemon: Unregister build hook from the worker's children upon build failure....Fixes <https://bugs.gnu.org/38062>.
This is a followup to ada9a19a2dca74feafcf24df1152abd685d4142f.
* nix/libstore/build.cc (DerivationGoal::killChild): Add conditional
call to 'worker.childTerminated' for 'hook->pid'.
| Ludovic Courtès |
| 2019-10-16 | daemon: Make 'profiles/per-user' non-world-writable....Fixes <https://bugs.gnu.org/37744>.
Reported at <https://www.openwall.com/lists/oss-security/2019/10/09/4>.
Based on Nix commit 5a303093dcae1e5ce9212616ef18f2ca51020b0d
by Eelco Dolstra <edolstra@gmail.com>.
* nix/libstore/local-store.cc (LocalStore::LocalStore): Set 'perUserDir'
to #o755 instead of #o1777.
(LocalStore::createUser): New function.
* nix/libstore/local-store.hh (LocalStore): Add it.
* nix/libstore/store-api.hh (StoreAPI): Add it.
* nix/nix-daemon/nix-daemon.cc (performOp): In 'wopSetOptions', add
condition to handle "user-name" property and honor it.
(processConnection): Add 'userId' parameter. Call 'store->createUser'
when userId is not -1.
* guix/profiles.scm (ensure-profile-directory): Note that this is now
handled by the daemon.
* guix/store.scm (current-user-name): New procedure.
(set-build-options): Add #:user-name parameter and pass it to the daemon.
* tests/guix-daemon.sh: Test the creation of 'profiles/per-user' when
listening on a TCP socket.
* tests/store.scm ("profiles/per-user exists and is not writable")
("profiles/per-user/$USER exists"): New tests.
| Ludovic Courtès |
| 2019-10-16 | daemon: Remove traces of 'NIX_ROOT_FINDER'....This is a followup to 2e3e5d21988fc2cafb2a9eaf4b00976ea425629d.
* build-aux/test-env.in: Remove mentions of 'NIX_ROOT_FINDER'.
* nix/libstore/gc.cc (LocalStore::collectGarbage): Adjust comment
accordingly.
| Ludovic Courtès |
| 2019-09-28 | daemon: Strictly respect timeouts for 'guix offload'....Until now it was up to 'guix offload' to honor timeouts. Unfortunately
it would sometimes fail to do that, for example due to the libssh bug at
<https://bugs.libssh.org/T33>. With this change, 'guix offload' is
automatically killed by the daemon when one of the timeouts expires.
Thus, data transfers performed by 'guix offload' now count as part of
the timeouts, rather than just actual build time.
* nix/libstore/build.cc (DerivationGoal::tryBuildHook): Pass true as the
'respectTimeouts' argument to 'childStarted'.
| Ludovic Courtès |
| 2019-09-16 | daemon: Include 'config.h' in 'nix-daemon.cc'....* nix/nix-daemon/nix-daemon.cc: Include 'config.h'.
| Timothy Sample |
| 2019-09-08 | daemon: Remove 'NIX_LIBEXEC_DIR'....* nix/libstore/globals.hh (Settings)[nixLibexecDir]: Remove.
* nix/libstore/globals.cc (Settings::processEnvironment): Remove
reference to 'nixLibexecDir'.
* nix/local.mk (libstore_a_CPPFLAGS): Remove -DNIX_LIBEXEC_DIR flag.
* build-aux/pre-inst-env.in: Remove references to 'NIX_LIBEXEC_DIR'.
| Ludovic Courtès |
| 2019-09-08 | daemon: Run 'guix substitute' directly and assume a single substituter....The daemon had a mechanism that allows it to handle a list of
substituters and try them sequentially; this removes it.
* nix/scripts/substitute.in: Remove.
* nix/local.mk (nodist_pkglibexec_SCRIPTS): Remove.
* config-daemon.ac: Don't output 'nix/scripts/substitute'.
* nix/libstore/build.cc (SubstitutionGoal)[subs, sub, hasSubstitute]:
Remove.
[tryNext]: Make private.
(SubstitutionGoal::SubstitutionGoal, SubstitutionGoal::init): Remove now
unneeded initializers.
(SubstitutionGoal::tryNext): Adjust to assume a single substituter: call
'amDone' upfront when we couldn't find substitutes.
(SubstitutionGoal::tryToRun): Adjust to run 'guix substitute' via
'settings.guixProgram'.
(SubstitutionGoal::finished): Call 'amDone(ecFailed)' upon failure
instead of setting 'state' to 'tryNext'.
* nix/libstore/globals.hh (Settings)[substituters]: Remove.
* nix/libstore/local-store.cc (LocalStore::~LocalStore): Adjust to
handle a single substituter.
(LocalStore::startSubstituter): Remove 'path' parameter. Adjust to
invoke 'settings.guixProgram'. Don't refer to 'run.program', which no
longer exists.
(LocalStore::querySubstitutablePaths): Adjust for 'runningSubstituters'
being a singleton instead of a list.
(LocalStore::querySubstitutablePathInfos): Likewise, and remove
'substituter' parameter.
* nix/libstore/local-store.hh (RunningSubstituter)[program]: Remove.
(LocalStore)[runningSubstituters]: Remove.
[runningSubstituter]: New field.
[querySubstitutablePathInfos]: Remove 'substituter' parameter.
[startSubstituter]: Remove 'substituter' parameter.
* nix/nix-daemon/guix-daemon.cc (main): Remove references to
'settings.substituters'.
* nix/nix-daemon/nix-daemon.cc (performOp): Ignore the user's
"build-use-substitutes" value when 'settings.useSubstitutes' is false.
| Ludovic Courtès |
| 2019-09-08 | daemon: Run 'guix offload' directly....* nix/scripts/offload.in: Remove.
* nix/local.mk (nodist_pkglibexec_SCRIPTS) [BUILD_DAEMON_OFFLOAD]:
Remove 'scripts/offload'.
* config-daemon.ac: Don't output 'nix/scripts/offload'.
* build-aux/pre-inst-env.in: Don't set 'NIX_BUILD_HOOK'.
* nix/libstore/build.cc (HookInstance::HookInstance): Run 'guix
offload'.
(DerivationGoal::tryBuildHook): Remove reference to 'NIX_BUILD_HOOK'.
* nix/nix-daemon/guix-daemon.cc (main) [HAVE_DAEMON_OFFLOAD_HOOK]: Don't
set 'NIX_BUILD_HOOK'.
* nix/nix-daemon/nix-daemon.cc (performOp) [!HAVE_DAEMON_OFFLOAD_HOOK]:
Leave 'settings.useBuildHook' unchanged.
| Ludovic Courtès |
| 2019-09-08 | daemon: Run 'guix perform-download' directly....* nix/scripts/download.in: Remove.
* nix/local.mk (nodist_pkglibexec_SCRIPTS): Remove 'scripts/download'.
* config-daemon.ac: Don't output 'nix/scripts/download'.
* nix/libstore/builtins.cc (builtinDownload): Invoke 'guix
perform-download' directly.
| Ludovic Courtès |
| 2019-09-08 | daemon: Run 'guix authenticate' directly....* nix/scripts/authenticate.in: Remove.
* nix/local.mk (nodist_pkglibexec_SCRIPTS): Remove
scripts/authenticate.
* config-daemon.ac: Don't output 'nix/scripts/authenticate'.
* nix/libstore/local-store.cc (runAuthenticationProgram): Run 'guix
authenticate'.
| Ludovic Courtès |
| 2019-09-08 | daemon: Invoke 'guix gc --list-busy' instead of 'list-runtime-roots'....* nix/scripts/list-runtime-roots.in: Remove.
* guix/store/roots.scm (%proc-directory): New variable.
(proc-file-roots, proc-exe-roots, proc-cwd-roots)
(proc-fd-roots, proc-maps-roots, proc-environ-roots)
(referenced-files, canonicalize-store-item, busy-store-items): New
procedures, taken from 'list-runtime-roots.in'.
* nix/libstore/globals.hh (Settings)[guixProgram]: New field.
* nix/libstore/globals.cc (Settings::processEnvironment): Initialize
'guixProgram'.
* nix/libstore/gc.cc (addAdditionalRoots): Drop code related to
'NIX_ROOT_FINDER'. Run "guix gc --list-busy".
* nix/local.mk (nodist_pkglibexec_SCRIPTS): Remove
'scripts/list-runtime-roots'.
* config-daemon.ac: Don't output nix/scripts/list-runtime-roots.
* build-aux/pre-inst-env.in: Don't set 'NIX_ROOT_FINDER'.
Set 'GUIX'.
* doc/guix.texi (Invoking guix gc): Document '--list-busy'.
* guix/scripts/gc.scm (show-help, %options): Add "--list-busy".
(guix-gc)[list-busy]: New procedure.
Handle the 'list-busy' action.
| Ludovic Courtès |
| 2019-08-30 | daemon: Don't reply on 'st_blocks'....Ported by Ludovic Courtès <ludo@gnu.org>
from <https://github.com/NixOS/nix/commit/a2c4fcd5e9782dc8d2998773380c7171ee53b813>.
* nix/libstore/gc.cc (LocalStore::removeUnusedLinks): Use 'st.st_size'
instead of 'st.st_blocks * 512'.
* nix/libutil/util.cc (_deletePath): Likewise.
| Eelco Dolstra |
| 2019-06-13 | daemon: Replace "illegal" by "invalid" in error messages....* nix/libstore/build.cc (parseReferenceSpecifiers): Replace "illegal" by
"invalid".
* nix/libstore/globals.cc (Settings::pack): Likewise.
* nix/libstore/store-api.cc (checkStoreName): Likewise.
| Ludovic Courtès |
| 2019-03-13 | Remove traces of "GuixSD"....* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Remove
mentions of "GuixSD".
* gnu/bootloader/grub.scm (install-grub-efi): Likewise.
* gnu/build/vm.scm (make-iso9660-image): Change default #:volume-id to
"Guix_image".
(initialize-hard-disk): Search for the "Guix_image" label.
* gnu/ci.scm (system-test-jobs, tarball-jobs): Remove "GuixSD".
* gnu/installer/newt/welcome.scm (run-welcome-page): Likewise.
* gnu/packages/audio.scm (supercollider)[description]: Likewise.
* gnu/packages/curl.scm (curl): Likewise.
* gnu/packages/emacs.scm (emacs): Likewise.
* gnu/packages/gnome.scm (network-manager): Likewise.
* gnu/packages/julia.scm (julia): Likewise.
* gnu/packages/linux.scm (alsa-plugins): Likewise.
(powertop, wireless-regdb): Likewise.
* gnu/packages/package-management.scm (guix): Likewise.
* gnu/packages/polkit.scm (polkit): Likewise.
* gnu/packages/tex.scm (texlive-bin): Likewise.
* gnu/services/base.scm (file-systems->fstab): Likewise.
* gnu/services/cups.scm (%cups-activation): Likewise.
* gnu/services/mail.scm (%dovecot-activation): Likewise.
* gnu/services/messaging.scm (prosody-configuration)[log]: Likewise.
* gnu/system/examples/vm-image.tmpl (vm-image-motd): Likewise.
* gnu/system/install.scm (installation-os)[file-systems]: Change root
file system label to "Guix_image".
* gnu/system/mapped-devices.scm (check-device-initrd-modules):
Remove "GuixSD".
* gnu/system/vm.scm (system-docker-image): Likewise.
(system-disk-image)[root-label]: Change to "Guix_image".
* gnu/tests/install.scm (run-install): Remove "GuixSD".
* guix/modules.scm (guix-module-name?): Likewise.
* nix/libstore/optimise-store.cc: Likewise.
| Ludovic Courtès |
| 2019-02-06 | daemon: Emit a 'build-succeeded' event in check mode....Until now, something like "guix build sed -v1 --check" would not get a
'build-succeeded' event, which in turn meant that the spinner would not
be erased upon build completion.
* nix/libstore/build.cc (DerivationGoal::registerOutputs): When
'buildMode' is bmCheck and 'settings.printBuildTrace' emit a
"@ build-succeeded" trace upon success.
* tests/store.scm ("build-succeeded trace in check mode"): New test.
| Ludovic Courtès |
| 2019-02-04 | daemon: Add "/guix" to default 'nixLibexecDir'....This makes it easier to run the uninstalled daemon.
* nix/local.mk (libstore_a_CPPFLAGS): Append "/guix" to
NIX_LIBEXEC_DIR.
* build-aux/pre-inst-env.in (NIX_LIBEXEC_DIR): Adjust comment.
* nix/libstore/builtins.cc (builtinDownload): Remove SUBDIR and its
use.
* nix/libstore/local-store.cc (runAuthenticationProgram): Ditto.
* nix/libstore/gc.cc (addAdditionalRoots): Remove "/guix" prefix.
* nix/nix-daemon/guix-daemon.cc (main): Ditto.
| Ludovic Courtès |
| 2019-02-04 | daemon: Remove the 'NIX_SUBSTITUTERS' environment variable....* nix/libstore/globals.cc (Settings:update): Remove changes to
'substituters'.
* nix/nix-daemon/guix-daemon.cc (main): Set 'settings.substituters'
directly instead of changing the 'NIX_SUBSTITUTERS' environment variable.
* build-aux/pre-inst-env.in: Remove reference to 'NIX_SUBSTITUTERS'.
| Ludovic Courtès |
| 2019-02-04 | daemon: Remove unused 'NIX_DATA_DIR' environment variable....* nix/libstore/globals.hh (Settings)[nixDataDir]: Remove.
* nix/libstore/globals.cc (Settings:processEnvironment): Remove setting
of 'nixDataDir'.
* nix/local.mk (libstore_a_CPPFLAGS): Remove '-DNIX_DATA_DIR'.
| Ludovic Courtès |
| 2019-02-04 | daemon: Rename 'NIX_STATE_DIR' and 'NIX_DB_DIR' environment variables....Fixes <https://bugs.gnu.org/22459>.
Reported by Jeff Mickey <j@codemac.net>.
* guix/config.scm.in (%state-directory): Change NIX_STATE_DIR to
GUIX_STATE_DIRECTORY.
(%store-database-directory): Change NIX_DB_DIR to
GUIX_DATABASE_DIRECTORY.
* nix/libstore/globals.cc (Settings::processEnvironment): Likewise.
* guix/self.scm (make-config.scm): Likewise.
* build-aux/build-self.scm (make-config.scm): Likewise.
* build-aux/test-env.in: Likewise.
* tests/derivations.scm ("derivation #:leaked-env-vars"): Likewise.
* tests/guix-build.sh (GUIX_DAEMON_SOCKET): Likewise.
* tests/guix-daemon.sh (socket): Likewise.
| Ludovic Courtès |
| 2018-12-16 | daemon: Use unbranded phrases in comments and messages....* nix/libstore/build.cc, nix/libstore/globals.cc,
nix/libstore/gc.cc, nix/libstore/local-store.cc,
nix/libstore/optimise-store.cc, nix/libstore/store-api.cc,
nix/libutil/archive.cc, nix/nix-daemon/nix-daemon.cc: Replace "Nix
store" by "store", and "Nix daemon" by "build daemon".
| Ludovic Courtès |
| 2018-11-24 | daemon: Ignore '--keep-failed' for TCP/IP clients....* nix/nix-daemon/nix-daemon.cc (performOp) <wopSetOptions>: When
'isRemoteConnection' is true, set 'settings.keepFailed' to zero.
* doc/guix.texi (Common Build Options): Document this behavior.
| Ludovic Courtès |
| 2018-11-14 | daemon: Install 'authenticate' script under LIBEXECDIR/guix....That way it is handled in the same way as other helper scripts.
* nix/scripts/guix-authenticate.in: Rename to...
* nix/scripts/authenticate.in: ... this.
* config-daemon.ac: Adjust accordingly.
* nix/local.mk (libstore_a_CPPFLAGS): Remove -DOPENSSL_PATH.
(nodist_libexec_SCRIPTS): Remove.
(nodist_pkglibexec_SCRIPTS): New variable.
* nix/nix-daemon/guix-daemon.cc (main): Remove 'setenv' call for
"PATH".
* nix/libstore/local-store.cc (runAuthenticationProgram): New function.
(LocalStore::exportPath, LocalStore::importPath): Use it instead of
'runProgram' and OPENSSL_PATH.
| Ludovic Courtès |
| 2018-10-15 | daemon: Support multiplexed build output....This allows clients to tell whether output comes from the daemon or, if
it comes from a builder, from which builder it comes. The latter is
particularly useful when MAX-BUILD-JOBS > 1.
* nix/libstore/build.cc (DerivationGoal::tryBuildHook)
(DerivationGoal::startBuilder): Print the child's PID in "@ build-started"
traces.
(DerivationGoal::handleChildOutput): Define 'prefix', pass it to
'writeToStderr'.
* nix/libstore/globals.cc (Settings:Settings): Initialize
'multiplexedBuildOutput'.
(Settings::update): Likewise.
* nix/libstore/globals.hh (Settings)[multiplexedBuildOutput]: New field.
Update 'printBuildTrace' documentation.
* nix/libstore/worker-protocol.hh (PROTOCOL_VERSION): Bump to 0.163.
* nix/nix-daemon/nix-daemon.cc (performOp) <wopSetOptions>: Special-case
"multiplexed-build-output" and remove "use-ssh-substituter".
* guix/store.scm (set-build-options): Add #:multiplexed-build-output?
and honor it.
(%protocol-version): Bump to #x163.
* tests/store.scm ("multiplexed-build-output"): New test.
fixlet
| Ludovic Courtès |
| 2018-10-02 | daemon: Remove unused 'Settings' fields....* nix/libstore/globals.hh (Settings)[sshSubstituterHosts]
[useSshSubstituter, logServers, enableImportNative]: Remove fields.
* nix/libstore/globals.cc (Settings::Settings, Settings::update): Remove
references to these.
| Ludovic Courtès |
| 2018-10-02 | daemon: Remove "case hack" for nars....This code has never been of any use in Guix.
* nix/libutil/archive.cc (useCaseHack): Remove.
(parse): Keep only the alternate branch in "if (useCaseHack)".
| Ludovic Courtès |
| 2018-09-27 | perform-download: Optionally report a "download-progress" trace....* guix/scripts/perform-download.scm (perform-download): Add
#:print-build-trace? and pass it to 'url-fetch'.
(guix-perform-download): Define 'print-build-trace?' and pass it to
'perform-download'.
* guix/build/download.scm (ftp-fetch): Add #:print-build-trace? and
honor it.
(url-fetch): Likewise.
* nix/libstore/builtins.cc (builtinDownload): Set _NIX_OPTIONS
environment variable.
| Ludovic Courtès |
| 2018-09-27 | Add (guix status) and use it for pretty colored output....* guix/progress.scm (progress-reporter/trace): New procedure.
(%progress-interval): New variable.
(progress-reporter/file): Use it.
* guix/scripts/build.scm (set-build-options-from-command-line): Pass
#:print-extended-build-trace?.
(%default-options): Add 'print-extended-build-trace?'.
(guix-build): Parameterize CURRENT-TERMINAL-COLUMNS. Use
'build-status-updater'.
* guix/scripts/environment.scm (%default-options): Add
'print-extended-build-trace?'.
(guix-environment): Wrap body in 'with-status-report'.
* guix/scripts/pack.scm (%default-options): Add 'print-build-trace?' and
'print-extended-build-trace?'.
(guix-pack): Wrap body in 'with-status-report'.
* guix/scripts/package.scm (%default-options, guix-package): Likewise.
* guix/scripts/system.scm (%default-options, guix-system): Likewise.
* guix/scripts/pull.scm (%default-options, guix-pull): Likewise.
* guix/scripts/substitute.scm (progress-report-port): Don't call STOP
when TOTAL is zero.
(process-substitution): Add #:print-build-trace? and honor it.
(guix-substitute)[print-build-trace?]: New variable.
Pass #:print-build-trace? to 'process-substitution'.
* guix/status.scm: New file.
* guix/store.scm (set-build-options): Add #:print-extended-build-trace?;
pass it into PAIRS.
(%protocol-version): Bump.
(protocol-version, nix-server-version): New procedures.
(current-store-protocol-version): New variable.
(with-store, build-things): Parameterize it.
* guix/ui.scm (build-output-port): Remove.
(colorize-string): Export.
* po/guix/POTFILES.in: Add guix/status.scm.
* tests/status.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* nix/libstore/worker-protocol.hh (PROTOCOL_VERSION): Bump to 0x162.
* nix/libstore/build.cc (DerivationGoal::registerOutputs)
(SubstitutionGoal::finished): Print a "@ hash-mismatch" trace before
throwing.
| Ludovic Courtès |
| 2018-06-22 | build: Remove leftover reference to nix/libstore/schema.sql....This is a followup to 3931c76154d4f418d5ea9acc5e47bf911d371c24.
Reported by Julien Lepiller.
* nix/local.mk (EXTRA_DIST): Remove schema.sql.
| Ludovic Courtès |
