| Age | Commit message (Expand) | Author |
|---|
| 2024-01-14 | tests: install: Fix encrypted-home-os, encrypted-home-os-key-file tests....The installation no longer fits into the 1.6G, leading to a warning while
running the test:
guix system: warning: at least 1526.8 MB needed but only 1408.4 MB available in /mnt
Followed by a failure:
93% [#################################################################### ]note: build failure may have been caused by lack of free disk space
builder for `/gnu/store/8wl8q8nc1za0vlyv21jpzwgml45njgk2-module-import-compiled.drv' failed with exit code 1
This commit increases the root partition to 2G, making the test pass again.
* gnu/tests/install.scm (%encrypted-root-installation-script): Increase the
root partition to 2G.
(%test-encrypted-home-os), (%test-encrypted-home-os-key-file): Increase the
target size to 3G to accommodate for the larger root partition.
Change-Id: I0f7092f7b7fc9992d3f895a1eaecf1f2065b7360
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Tomas Volf |
| 2024-01-14 | tests: install: Fix encrypted-root-os test....The installation no longer fits into the 1.6G, leading to a warning while
running the test:
guix system: warning: at least 1526.8 MB needed but only 1408.4 MB available in /mnt
Followed by a failure:
93% [#################################################################### ]note: build failure may have been caused by lack of free disk space
builder for `/gnu/store/8wl8q8nc1za0vlyv21jpzwgml45njgk2-module-import-compiled.drv' failed with exit code 1
This commit increases the root partition to 2G, making the test pass again.
* gnu/tests/install.scm (%encrypted-root-installation-script): Increase the
root partition to 2G.
Change-Id: I4cc5c78cfbd93ab2ae92ec77603ce6fee0289843
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Tomas Volf |
| 2024-01-14 | tests: install: Use the smallest possible iteration time for LUKS....For testing that installation works, there is no need to spent 2000ms (the
default) iterating while generating the encryption key. This commit therefore
sets the iteration time to the lowest possible value, 1(ms).
* gnu/tests/install.scm (%encrypted-root-installation-script):
(%encrypted-home-installation-script):
(%encrypted-root-not-boot-installation-script): Pass -i 1 to luksFormat
invocation.
Change-Id: Iab79459b48bebe4d293b18290a236c6414fb27fc
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Tomas Volf |
| 2024-01-14 | tests: Add `encrypted-home-os-key-file' installation test....Based on encrypted-home-os, this test verifies unlocking via a key file.
* gnu/tests/install.scm (%encrypted-home-os-key-file),
(%encrypted-home-os-key-file-source): New variables.
(%test-encrypted-home-os-key-file): New exported variables.
(%encrypted-home-installation-script): Generate initrd with a key file for
unlocking the LUKS.
Change-Id: I04460155284bdef7e18da645f2b4b26bd8e86636
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Tomas Volf |
| 2024-01-12 | tests: security: Fix fail2ban-extension-test....The openssh-service-type requires 'networking to be setup. So add a
static-networking-service-type that provides it.
* gnu/tests/security.scm
(run-fail2ban-extension-test)[simple-operating-system]: Add
static-networking-service-type service.
Change-Id: I8d736cbf3fcaa54f86fbd60c52b3595b647731e2
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Tomas Volf |
| 2024-01-09 | tests: telephony: Fix typo....* gnu/tests/telephony.scm: Fix typo.
Series-to: 65371@debbugs.gnu.org
Series-postfix: telephony-team
Series-version: 2
Change-Id: I3eb048b8cdd1335c45ffb61b08425a18a2e7a4b2
| Maxim Cournoyer |
| 2024-01-09 | tests: telephony: Fix VPATH builds....* gnu/tests/telephony.scm (%jami-account-content-sexp): New variable. Compute
its value with `read` instead of using `include`.
* gnu/tests/data/jami-dummy-account.dat (%jami-account-content-sexp): Remove
variable. Make the file contain just the S-expression.
Change-Id: I8d37aaf7b739f5f39715bfb8a9b8c9536385fd09
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
| Wojtek Kosior |
| 2024-01-08 | tests: childhurd: Increase SSH connection timeout....* gnu/tests/virtualization.scm (run-childhurd-test)[run-command-over-ssh]:
Pass #:timeout.
Change-Id: I44bb3673457275fe3a8ec0af2e364292727f53a8
| Ludovic Courtès |
| 2024-01-08 | tests: docker-system: Increase image size....* gnu/tests/docker.scm (run-docker-system-test)[vm]: Increase
'disk-image-size'.
Change-Id: If88588d8981efdfdc539460900f1cbb9a663f9cb
| Oleg Pykhalov |
| 2023-12-22 | tests: jami: Double timeouts....* gnu/tests/telephony.scm (run-jami-test): Pass #:timeout to
‘wait-for-service’. Double number passed to ‘with-retries’.
Change-Id: Ib3c81a770c2d52b2eb40e4f28abc8e33f5c71fc8
| Ludovic Courtès |
| 2023-12-22 | tests: jami: Check status of Jami D-Bus session....* gnu/tests/telephony.scm (run-jami-test)["dbus session is up"]: New
test.
Reviewed-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Change-Id: Ifa9b57c732f3c64e1ec6bf3028b69a57cee56320
| Ludovic Courtès |
| 2023-12-14 | services: Add rspamd-service-type....* gnu/services/mail.scm (rspamd-service-type): New variable.
* gnu/tests/mail.scm (%test-rspamd): New variable.
* doc/guix.texi: Document it.
Co-authored-by: Saku Laesvuori <saku@laesvuori.fi>
Change-Id: I7196643f087ffe9fc91aab231b69d5ed8dc9d198
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Thomas Ieong |
| 2023-12-14 | tests: childhurd: Prefer “-cpu max” over “-cpu host”....“-cpu host” can sometimes, for unclear reasons, lead to this error from
QEMU 8.1.1:
qemu-system-x86_64: CPU model 'host' requires KVM or HVF
This commit fixes it.
Inspired by
<https://github.com/matthewbauer/nixpkgs/commit/47b56e7c19c2e3af685ee408f02f232efb3d12b1>.
* gnu/tests/virtualization.scm (run-childhurd-test)[test]: Prefer
“-cpu max” over “-cpu host”.
Change-Id: I11a8a68bb0532fe1f3fd2c34b4a7a5fdb7bccb57
| Ludovic Courtès |
| 2023-11-05 | tests: inetd: Avoid race condition when looking for PID file....* gnu/tests/networking.scm (run-inetd-test): Use ‘wait-for-file’ instead
of ‘file-exists?’.
Change-Id: I3e596814485428fb81595d81c4e03519340c6576
| Ludovic Courtès |
| 2023-10-11 | services: static-networking: Add support for bonding....* gnu/services/base.scm (<network-link>): Add mac-address field. Set
type field to #f by default, so it won't be mandatory. network-link
without a type will be used for existing interfaces.
(assert-network-link-mac-address, mac-address?): Add sanitizer. Allow
valid mac-address or #f.
(assert-network-link-type): Add sanitizer. Allow symbol or #f.
* gnu/services/base.scm (network-set-up/linux,
network-tear-down/linux): Adapt to new structure.
* doc/guix.texi (Networking Setup): Document it.
* gnu/tests/networking.scm (run-static-networking-advanced-test): New
variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Alexey Abramov |
| 2023-10-05 | tests: childhurd: Test SSH connection with a non-root user....* gnu/tests/virtualization.scm (%childhurd-os): Remove ‘services’ and
add ‘users’ to the GNU/Hurd ‘operating-system’ declaration.
(run-childhurd-test)[run-command-over-ssh]: Log in as “test” instead of
“root”.
| Ludovic Courtès |
| 2023-10-01 | services: hurd-vm: Implement zero-configuration offloading....This allows for zero-configuration offloading to a childhurd.
* gnu/services/virtualization.scm (operating-system-with-offloading-account):
New procedure.
(<hurd-vm-configuration>)[offloading?]: New field.
(hurd-vm-disk-image): Define ‘transform’ and use it.
(hurd-vm-activation): Generate SSH key for user ‘offloading’ and add
authorize it via /etc/childhurd/etc/ssh/authorized_keys.d.
(hurd-vm-configuration-offloading-ssh-key)
(hurd-vm-guix-extension): New procedures.
(hurd-vm-service-type): Add GUIX-SERVICE-TYPE extension.
* gnu/tests/virtualization.scm (run-childhurd-test)[import-module?]: New
procedure.
[os]: Add (gnu build install) and its closure to #:import-modules.
[test]: Add “copy-on-write store” and “offloading” tests.
* doc/guix.texi (Virtualization Services): Document it.
| Ludovic Courtès |
| 2023-10-01 | services: hurd-vm: Disable password-based authentication for root....With offloading to a childhurd is enabled, allowing password-less root
login in the childhurd to anyone amounts to providing write access to
the host’s store to anyone. Thus, disable password-based root logins in
the childhurd.
* gnu/services/virtualization.scm (%hurd-vm-operating-system): Change
‘permit-root-login’ to 'prohibit-password.
* gnu/tests/virtualization.scm (%childhurd-os): Provide a custom ‘os’
field for ‘hurd-vm-configuration’.
* doc/guix.texi (Virtualization Services): Remove mention of
password-less root login.
| Ludovic Courtès |
| 2023-10-01 | tests: hurd-vm: Remove custom disk image configuration....This was added in 18e76f89055f25f015fadb7c999b410f38a88cc6. Presumably,
the problem was that using compressed QCOW2 images makes the childhurd
slower, so it’s eventually marked as failing to start. By enabling KVM
inside the Guix System VM, we allow the childhurd to run on KVM, which
compensates the slowdown due to the use of a compressed image.
* gnu/tests/virtualization.scm (hurd-vm-disk-image-raw): Remove.
(%childhurd-os): Use default config for ‘hurd-vm-service-type’.
(run-childhurd-test)[test]: Pass “-cpu host” to the run-vm script.
| Ludovic Courtès |
| 2023-10-01 | services: hurd-vm: ‘image’ field has to be an <image> record....* gnu/services/virtualization.scm (<hurd-vm-configuration>)[image]:
Document as being an <image> record.
(hurd-vm-disk-image): Remove call to ‘system-image’.
(hurd-vm-shepherd-service): Add call to ‘system-image’.
* gnu/tests/virtualization.scm (hurd-vm-disk-image-raw): Remove call to
‘system-image’.
* doc/guix.texi (Virtualization Services): Adjust accordingly.
| Ludovic Courtès |
| 2023-09-17 | tests: childhurd: Add missing module imports....Fixes a regression introduced in
a09c7da8f8d8e732f969cf0a09aaa78f87032ab1.
* gnu/tests/virtualization.scm (run-childhurd-test)[test]: Import (ice-9
textual-ports) and (ice-9 match) in the marionette when needed.
| Ludovic Courtès |
| 2023-09-15 | services: guix: Add bffe-service-type....This is intended to replace the functionality of the Guix Build Coordinator
queue builds script, and also provide a web interface for build farms.
* gnu/services/guix.scm (<bffe-configuration>): New record type.
(bffe-configuration, bffe-configuration?,
bffe-configuration-package,
bffe-configuration-user,
bffe-configuration-group,
bffe-configuration-arguments
bffe-configuration-extra-environment-variables): New procedures.
(bffe-service-type): New variable.
* gnu/tests/guix.scm (%test-bffe): New variable.
* doc/guix.texi (Guix Services): Document the new service.
| Christopher Baines |
| 2023-09-08 | services: ganeti: Fix tests....* gnu/tests/ganeti.scm (run-ganeti-test)["force-start wconfd"]: Don't use
INVOKE.
["gnt-os list"]: Import (ice-9 textual-ports).
| Marius Bakke |
| 2023-08-25 | image: Add mbr-raw-image-type and use by default....* gnu/system/image.scm (mbr-disk-image, mbr-raw-image-type): New variables.
(qcow2-image-type): Inherit mbr-disk-image.
* guix/scripts/system.scm (%default-options): Use mbr-raw-image-type by
default.
* gnu/tests/install.scm (run-install): Use mbr-raw in the tests.
* doc/guix-cookbook.texi (Guix System Image API): Update the list of image
types.
* doc/guix.texi (Invoking guix system, System Images, image-type Reference):
Add mbr-raw and switch documented default to it.
| Josselin Poiret |
| 2023-08-16 | gnu: elogind: Update to 252.9....* gnu/packages/freedesktop.scm (elogind): Update to 252.9.
[source]: Replace elogind-revert-polkit-detection.patch with
elogind-fix-rpath.patch in patches.
[configure-flags]: Add the dbussystemservicedir, dbussessionservicedir,
dbussystemservicedir and dbus-interfaces-dir flags.
[phases] <use-global-hook-directory> Update list of patched files.
<adjust-tests> Update substitutions, and skip the copy_holes test.
[native-inputs]: Add python-jinja2.
[inputs]: Add util-linux:lib.
* gnu/services/desktop.scm (elogind-dbus-service)
<elogind-dbus-service-wrapper>: Add a symlink to elogind's
share/dbus-1/system.d to expose D-Bus policy configurations.
* gnu/tests/desktop.scm (run-elogind-test): Adjust expected result for the new
"linger" value.
* gnu/packages/patches/elogind-revert-polkit-detection.patch: Delete file.
* gnu/packages/patches/elogind-fix-rpath.patch: New file.
* gnu/local.mk (dist_patch_DATA): Update.
Series-to: 64938@debbugs.gnu.org
Series-prefix: elogind-updates
Series-version: 2
Series-changes: 2
- Fix elogind system test
- Install D-Bus policy files in elogind-dbus-service-wrapper
- Remove duplicate 'dbussystemservicedir' configure flag
| Maxim Cournoyer |
| 2023-08-15 | services: Add cachefilesd service....Thanks to Bruno Victal "mirai" for cooperating on this patch and for
generously sharing a wealth of insights about Guix services.
Thanks to Jean-Baptiste Note for an early version of this service!
* doc/guix.texi (Linux Services)[Cachefilesd Service]: New heading.
* gnu/services/linux.scm (serialize-string, non-negative-integer?)
(serialize-non-negative-integer, string, non-negative-integer)
(make-option-serializer, make-percentage-threshold-serializer): New
procedures.
(cachefilesd-configuration): New record type.
(cachefilesd-service-type): New variable.
* gnu/tests/cachefilesd.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
Co-authored-by: Bruno Victal <mirai@makinata.eu>
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Felix Lechner |
| 2023-08-15 | tests: pam-limits: Confirm actual ulimits are installed....This revised system test is superior to the one accepted when #61744 was
closed because it confirms whether the configured limits are actually being
enforced upon login.
The previous test merely validated the serialization of one particular config
in the config file.
* gnu/tests/pam.scm (pam-limits-service): Revise test to confirm limits on
login.
(%test-pam-limits)[description]: Update.
(%test-pam-limits-deprecated): Remove.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Felix Lechner |
| 2023-07-19 | tests: lightdm: Bump timeout waiting for screen text to 60 seconds....This is to avoid non-deterministic failures on slower machines.
* gnu/tests/lightdm.scm (run-lightdm-test) <wait-for-screen-text>: Bump
timeout to 60 s (from the default 30 s).
| Maxim Cournoyer |
| 2023-07-19 | tests: xvnc: Fix 'gdm auto-suspend is disabled' test....This failure is another collateral from commit a09c7da ("tests: Fork and exec
a new Guile for the marionette REPL."), which isolated the marionette
evaluation environment from that of the host.
* gnu/tests/vnc.scm (run-xvnc-test): Move the (guix build utils) import to...
["gdm auto-suspend is disabled"]: ... inside the marionette-eval of this
test. Complete comment.
Reported-by: Bruno Victal <mirai@makinata.eu>
| Maxim Cournoyer |
| 2023-07-19 | tests: xvnc: Group up GDM test and use GNU Ocrad instead of Tesseract....* gnu/tests/vnc.scm (run-xvnc-test): Group up GDM test. Use GNU Ocrad.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
| Bruno Victal |
| 2023-07-19 | tests: gdm: Prefer OCR to delay....* gnu/tests/gdm.scm (run-gdm-test): Use wait-for-screen-text instead of sleep.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
| Bruno Victal |
| 2023-07-09 | gnu: lightdm: Apply patch to fix VNC server address binding ordering....* gnu/packages/patches/lightdm-vnc-ipv6.patch: New patch file.
* gnu/local.mk (dist_patch_DATA): Register it.
* gnu/packages/display-managers.scm (lightdm): Apply it.
* gnu/tests/lightdm.scm (run-lightdm-test): Remove comment and expected fail
directive for the "can connect to TCP port 5900 on IPv6" test.
Suggested-by: Bruno Victal <mirai@makinata.eu>
| Maxim Cournoyer |
| 2023-07-07 | image: Prefer gpt partition table for efi images...* gnu/system/image.scm (efi-disk-image): Use gpt partition-table-type.
(efi32-disk-image): Use gpt partition-table-type.
(qcow2-image-type): Use mbr partition-table-type explicitly.
* gnu/tests/image.scm: Assert partition table type of efi-disk-image.
Signed-off-by: Josselin Poiret <dev@jpoiret.xyz>
| Sergey Trofimov |
| 2023-05-25 | tests: Fix the Jami service system tests....This fixes a regression introduced with commit a09c7da ("tests: Fork and exec
a new Guile for the marionette REPL.") and only partially fixed with the
follow-up commit f518882 (" tests: Add missing module imports for
marionette-evaluated code.").
* gnu/tests/telephony.scm (run-jami-test): Remove extraneous module imports.
Move the setting of the DBUS_SESSION_BUS_ADDRESS environment variable inside
the first marionette-eval'd setup test.
["service can be stopped"]: Add missing (gnu build dbus-service) module.
| Maxim Cournoyer |
| 2023-05-18 | services: rsync: Use make-inetd-constructor....* gnu/services/rsync.scm (rsync-shepherd-service): Use make-inetd-constructor
if available in start slot.
* gnu/tests/rsync.scm (run-rsync-test): Delete "PID file" test.
Reviewed-by: Ludovic Courtès <ludo@gnu.org>
| Maxim Cournoyer |
| 2023-05-14 | tests: elogind: Wait until 'elogind' is up....Previously we could find ourselves typing in too early.
* gnu/tests/desktop.scm (run-elogind-test)["login on tty1"]: Wait for
'elogind in to 'term-tty1.
["screendump"]: New test.
| Ludovic Courtès |
| 2023-05-14 | tests: dhcpd: Avoid race conditions....Those tests were racy: it could take a while for those files to appear
and for the shepherd service to be up. Thus, wait a little longer for
each of them.
* gnu/tests/networking.scm (run-dhcpd-test)["pid file exists"]
["lease file exists"]: Use 'wait-for-file'.
["dhcpd is alive"]: Use 'wait-for-service'.
| Ludovic Courtès |
| 2023-05-11 | tests: vnstat: Avoid call to 'getservbyname'....This would break "make as-derivation" because /etc/services is
unavailable in the build environment:
[ 38/ 80] loading... 95.0% of 40 filesBacktrace:
In guix/build/compile.scm:
249:8 19 (compile-files "." "/gnu/store/s5nadqd6hkzivkxp33svwqslfn608ng5-guix-system-tests" ("gnu/tests/audio.scm" "gnu/tests/base.scm" "gnu/tests/ci.scm" "gnu/tests/cups.scm" "gnu/tests/d…" …) …)
[…]
In unknown file:
0 (getserv "discard" "tcp")
ERROR: In procedure getserv:
In procedure getserv: no such service discard
builder for `/gnu/store/…-guix-system-tests.drv' failed with exit code 1
* gnu/tests/vnstat.scm (run-vnstat-test): Hard-code 'guest-port' instead
of calling 'getservbyname'.
| Ludovic Courtès |
| 2023-05-11 | tests: Add vnstat tests....* gnu/tests/vnstat.scm: New file.
* gnu/local.mk: Register it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Bruno Victal |
| 2023-05-11 | tests: openvswitch: Wait for 'openvswitch-configuration' to be up....Checking for "br0" should only be done once the
'openvswitch-configuration' service is up because it's the one that sets
it up.
* gnu/tests/networking.scm (run-openvswitch-test)["openvswitch-configuration
is running"]: New test.
| Ludovic Courtès |
| 2023-05-10 | tests: docker-system: Add missing import....This is a followup to f51888272558d98cf5c196b93fb6c499056fbf6c.
* gnu/tests/docker.scm (run-docker-system-test)["load system image and
run it"]: Use (guix build utils).
| Ludovic Courtès |
| 2023-05-06 | tests: Add missing module imports for marionette-evaluated code....This missing imports became apparent with commit
a09c7da8f8d8e732f969cf0a09aaa78f87032ab1, which runs the marionette
service in a fresh Guile process with fewer imports.
* gnu/tests/databases.scm (run-postgresql-test, run-timescaledb-test)
(run-mysql-test): Add missing module imports for code passed to
'marionette-eval'.
* gnu/tests/docker.scm (run-docker-test, run-docker-system-test): Likewise.
* gnu/tests/mail.scm (run-dovecot-test, run-getmail-test): Likewise.
* gnu/tests/monitoring.scm (run-zabbix-server-test): Likewise.
* gnu/tests/pam.scm (run-test-pam-limits): Likewise.
* gnu/tests/reconfigure.scm (run-switch-to-system-test)
(run-install-bootloader-test): Likewise.
* gnu/tests/security-token.scm (run-pcscd-test): Likewise.
* gnu/tests/install.scm (gui-test-program): Likewise.
* gnu/tests/telephony.scm (run-jami-test): Add modules to
the #:imported-modules argument of 'marionette-operating-system'.
[test]: Remove them from 'with-imported-modules'; remove
'with-extensions'. Add "d-bus tooling loaded" test to set up %load-path
and %load-compiled-path so the marionette process can find
guile-ac-d-bus and guile-packrat.
| Ludovic Courtès |
| 2023-04-21 | tests: Use the client 'start-service' procedure....The previous code worked "by chance": 'start' from (shepherd service)
happened to be in scope because the marionette REPL is created by a mere
'primitive-fork', and 'start' happened to kinda work.
* gnu/tests/base.scm (run-basic-test): Use 'start-service' from (gnu
services herd), not 'start' from (shepherd service), which is not
supposed to work.
* gnu/tests/install.scm (run-install): Likewise.
| Ludovic Courtès |
| 2023-04-14 | gnu: MariaDB: Update to 10.10.2....* gnu/packages/databases.scm (mariadb): Update to 10.9.3.
[source](snippet): Remove adjustments for deprecated TokuDB.
[arguments]: Remove obsolete #:configure-flags. Build with system libfmt.
Adjust tests for 10.10.2, and mariadb_config file name. Remove patch phase.
[native-inputs]: Remove obsolete patch.
[inputs]: Add FMT. Change from OPENSSL-1.1 to OPENSSL.
* gnu/tests/databases.scm (%mysql-os): Adjust config file so MariaDB works on
overlayfs.
| Marius Bakke |
| 2023-03-30 | services: pam-limits-service-type: Deprecate file-like object support in favo......* doc/guix.texi (Base Services): Document it.
* gnu/local.mk: Register test.
* gnu/services/base.scm (pam-limits-service-type): Accept both lists and
file-like objects. Deprecate file-like object support.
* gnu/tests/pam.scm: New file.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Bruno Victal |
| 2023-03-21 | tests: gdm: Remove tmpfs related tests....This test never managed to reveal the problem described in [1] because
from gnu/system/vm.scm it is seen that our "/tmp" mount is filtered out and
replaced with a "/tmp" file-system that is mounted with (needed-for-boot? #t).
This last bit is crucial as the problem was caused by the user specified "/tmp"
file-system lacking this part which caused "/tmp" being mounted after
x11-socket-directory-service has run, effectively shadowing the directory.
[1]: <https://issues.guix.gnu.org/57589>
* gnu/tests/gdm.scm (%test-gdm-wayland-tmpfs): Delete variable.
(make-os): Remove tmpfs? argument.
(run-gdm-test): Remove tmpfs? argument. Add a small delay since
waiting for gdm.pid is not enough, causing the tests to fail sporadically.
Reviewed-by: Josselin Poiret <dev@jpoiret.xyz>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
| Bruno Victal |
| 2023-03-21 | services: Add x11-socket-directory-service-type....The x11-socket-directory-service misuses activation-service-type
to create directories. This kind of usage is incorrect since
activation-service-type does not depend on file-systems, hence incompatible
with user defined /tmp mount.
This commit turns x11-socket-directory-service into a shepherd one-shot
service by defining a new x11-socket-directory-service-type.
* gnu/services/desktop.scm (x11-socket-directory-service-type): New variable.
(x11-socket-directory-service): Deprecate procedure.
(desktop-services-for-system): Use new service-type.
* gnu/tests/lightdm.scm: Ditto.
Reviewed-by: Josselin Poiret <dev@jpoiret.xyz>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
| Bruno Victal |
| 2023-03-03 | services: dbus: Deprecate 'dbus-service' procedure....* doc/guix.texi (Desktop Services): Replace with 'dbus-root-service-type'.
Document dbus-configuration.
* gnu/services/dbus.scm (dbus-service): Define with 'define-deprecated'.
* gnu/services/desktop.scm (desktop-services-for-system): Replace with
dbus-root-service-type.
* gnu/system/install.scm (%installation-services): Ditto.
* gnu/tests/base.scm (%avahi-os): Ditto.
* gnu/tests/docker.scm (%docker-os): Ditto.
* gnu/tests/lightdm.scm (minimal-desktop-services): Ditto.
* gnu/tests/virtualization.scm (%libvirt-os): Ditto.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Bruno Victal |
| 2023-03-03 | services: mail: Deprecate 'dovecot-service' procedure....* doc/guix.texi (Mail Services): Replace 'dovecot-service' with 'dovecot-service-type'.
* gnu/services/mail.scm (dovecot-service-type): Set default value.
(dovecot-service): Deprecate procedure.
* gnu/tests/mail.scm (%dovecot-os): Use dovecot-service-type.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Bruno Victal |
| 2023-03-03 | services: dbus: Deprecate 'polkit-service' procedure....* doc/guix.texi (Desktop Services): Replace 'polkit-service' with 'polkit-service-type'.
* gnu/services/dbus.scm (polkit-service): Deprecate procedure.
* gnu/tests/docker.scm (%docker-os): Use polkit-service-type.
* gnu/tests/virtualization.scm (%libvirt-os): Ditto.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Bruno Victal |
