| Age | Commit message (Expand) | Author |
|---|
| 2023-10-11 | services: static-networking: Add support for bonding....* gnu/services/base.scm (<network-link>): Add mac-address field. Set
type field to #f by default, so it won't be mandatory. network-link
without a type will be used for existing interfaces.
(assert-network-link-mac-address, mac-address?): Add sanitizer. Allow
valid mac-address or #f.
(assert-network-link-type): Add sanitizer. Allow symbol or #f.
* gnu/services/base.scm (network-set-up/linux,
network-tear-down/linux): Adapt to new structure.
* doc/guix.texi (Networking Setup): Document it.
* gnu/tests/networking.scm (run-static-networking-advanced-test): New
variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Alexey Abramov |
| 2023-05-14 | tests: dhcpd: Avoid race conditions....Those tests were racy: it could take a while for those files to appear
and for the shepherd service to be up. Thus, wait a little longer for
each of them.
* gnu/tests/networking.scm (run-dhcpd-test)["pid file exists"]
["lease file exists"]: Use 'wait-for-file'.
["dhcpd is alive"]: Use 'wait-for-service'.
| Ludovic Courtès |
| 2023-05-11 | tests: openvswitch: Wait for 'openvswitch-configuration' to be up....Checking for "br0" should only be done once the
'openvswitch-configuration' service is up because it's the one that sets
it up.
* gnu/tests/networking.scm (run-openvswitch-test)["openvswitch-configuration
is running"]: New test.
| Ludovic Courtès |
| 2021-12-13 | tests: static-networking: Adjust to new style....* gnu/tests/networking.scm (run-static-networking-test)[test]: Remove
'mkdir', 'chdir', and 'exit' calls'. Add 'test-runner-current' call.
| Ludovic Courtès |
| 2021-12-13 | Merge branch 'master' into core-updates-frozen | Ludovic Courtès |
| 2021-12-12 | tests: Replace uses of deprecated 'static-networking-service'....* gnu/tests/ganeti.scm (%ganeti-os): Replace call to
'static-networking-service' by instantiating
STATIC-NETWORKING-SERVICE-TYPE.
* gnu/tests/networking.scm (%test-static-networking)
(%openvswitch-os, %dhcpd-os): Likewise.
| Ludovic Courtès |
| 2021-12-12 | services: static-networking: Change interface to mimic netlink....* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
| Ludovic Courtès |
| 2021-12-12 | tests: openvswitch: Check whether ovs0 is up....* gnu/tests/networking.scm (run-openvswitch-test)["ovs0 is up"]: New test.
| Ludovic Courtès |
| 2021-12-12 | tests: Add 'static-networking' test....* gnu/tests/networking.scm (run-static-networking-test): New procedure.
(%test-static-networking): New variable.
| Ludovic Courtès |
| 2021-09-26 | tests: Reduce boilerplate for users of 'system-test-runner'....* gnu/tests/audio.scm, gnu/tests/base.scm, gnu/tests/ci.scm,
gnu/tests/cups.scm, gnu/tests/databases.scm, gnu/tests/desktop.scm,
gnu/tests/dict.scm, gnu/tests/docker.scm, gnu/tests/file-sharing.scm,
gnu/tests/ganeti.scm, gnu/tests/guix.scm, gnu/tests/ldap.scm,
gnu/tests/linux-modules.scm,
gnu/tests/mail.scm, gnu/tests/messaging.scm, gnu/tests/monitoring.scm,
gnu/tests/networking.scm, gnu/tests/nfs.scm,
gnu/tests/package-management.scm, gnu/tests/reconfigure.scm,
gnu/tests/rsync.scm, gnu/tests/security-token.scm,
gnu/tests/singularity.scm, gnu/tests/ssh.scm, gnu/tests/telephony.scm,
gnu/tests/version-control.scm, gnu/tests/virtualization.scm,
gnu/tests/web.scm: Remove (mkdir #$output) (chdir #$output) and
pass #$output as argument to 'system-test-runner'.
| Ludovic Courtès |
| 2021-09-25 | tests: Adjust to SRFI-64 as found in Guile 3.0.7....In Guile 3.0.7, 'test-runner-current' is set to #f upon 'test-end'.
Consequently, the previous strategy, where we'd call
'test-runner-current' after 'test-end', no longer works. Instead, set
the test runner in each test right before 'test-begin'.
* gnu/build/marionette.scm (system-test-runner): New procedure.
* gnu/tests/audio.scm (run-mpd-test): Replace (exit (= ...)) idiom
by (test-runner-current (system-test-runner)).
* gnu/tests/base.scm (run-basic-test)
(run-cleanup-test, run-mcron-test, run-nss-mdns-test): Likewise.
* gnu/tests/ci.scm (run-laminar-test): Likewise.
* gnu/tests/cups.scm (run-cups-test): Likewise.
* gnu/tests/databases.scm (run-memcached-test)
(run-postgresql-test, run-mysql-test): Likewise.
* gnu/tests/desktop.scm (run-elogind-test): Likewise.
* gnu/tests/dict.scm (run-dicod-test): Likewise.
* gnu/tests/docker.scm (run-docker-test): Likewise.
(run-docker-system-test): Likewise.
* gnu/tests/file-sharing.scm (run-transmission-daemon-test): Likewise.
* gnu/tests/ganeti.scm (run-ganeti-test): Likewise.
* gnu/tests/guix.scm (run-guix-build-coordinator-test): Likewise.
(run-guix-data-service-test): Likewise.
* gnu/tests/ldap.scm (run-ldap-test): Likewise.
* gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test-base): Likewise.
* gnu/tests/mail.scm (run-opensmtpd-test)
(run-exim-test, run-dovecot-test, run-getmail-test): Likewise.
* gnu/tests/messaging.scm (run-xmpp-test)
(run-bitlbee-test, run-quassel-test): Likewise.
* gnu/tests/monitoring.scm (run-prometheus-node-exporter-server-test)
(run-zabbix-server-test): Likewise.
* gnu/tests/networking.scm (run-inetd-test, run-openvswitch-test)
(run-dhcpd-test, run-tor-test, run-iptables-test, run-ipfs-test): Likewise.
* gnu/tests/nfs.scm (run-nfs-test)
(run-nfs-server-test, run-nfs-root-fs-test): Likewise.
* gnu/tests/package-management.scm (run-nix-test): Likewise.
* gnu/tests/reconfigure.scm (run-switch-to-system-test)
(run-upgrade-services-test, run-install-bootloader-test): Likewise.
* gnu/tests/rsync.scm (run-rsync-test): Likewise.
* gnu/tests/security-token.scm (run-pcscd-test): Likewise.
* gnu/tests/singularity.scm (run-singularity-test): Likewise.
* gnu/tests/ssh.scm (run-ssh-test): Likewise.
* gnu/tests/telephony.scm (run-jami-test): Likewise.
* gnu/tests/version-control.scm (run-cgit-test): Likewise.
(run-git-http-test, run-gitolite-test, run-gitile-test): Likewise.
* gnu/tests/virtualization.scm (run-libvirt-test, run-childhurd-test): Likewise.
* gnu/tests/web.scm (run-webserver-test, run-php-fpm-test)
(run-hpcguix-web-server-test, run-tailon-test, run-patchwork-test): Likewise.
| Ludovic Courtès |
| 2021-04-12 | gnu: tests: Test basic funtionality of the IPFS service....It is tested whether the IPFS service listens
at the gateway and API ports and whether it
is possible to upload and download a bytevector.
* gnu/tests/networking.scm
(%ipfs-os): New variable.
(run-ipfs-test): New procedure.
(%test-ipfs): New system test.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Maxime Devos |
| 2020-07-11 | tests: networking: Use 'net.ifnames=0' for the Open vSwitch test....* gnu/tests/networking.scm (%openvswitch-os): Override KERNEL-ARGUMENTS.
| Marius Bakke |
| 2020-04-10 | tests: openvswitch: Use the absolute file name of ovs-vsctl....This fixes a regression introduced in 8b9cad01e9619f53dc5a65892ca6a09ca5de3447
where ovs-vsctl would no longer be available in PATH.
* gnu/tests/networking.scm (run-openvswitch-test): Qualify "ovs-vsctl"
invocation by ungexping the OPENVSWITCH variable instead of assuming it's
available on PATH.
| Marius Bakke |
| 2020-03-16 | tests: dhcpd: Adjust network interface name....This is a followup to 8e53fe2b91d2776bc1529e7b34967c8f1d9edc32.
* gnu/tests/networking.scm (dhcpd-v4-configuration)
(%dhcpd-os): Use "ens3" instead of "eth0".
| Ludovic Courtès |
| 2019-03-31 | services: Open vSwitch: Provide a default configuration....* gnu/services/networking.scm (openvswitch-service-type): Provide
OPENVSWITCH-CONFIGURATION as a default value.
* gnu/tests/networking.scm (%openvswitch-os): Don't configure the service.
| Marius Bakke |
| 2019-01-11 | services: Deprecate a few more service procedures....These procedures were already either undocumented (and de facto
deprecated) or documented as deprecated or redundant.
* gnu/services/base.scm (guix-service, guix-publish-service): Mark as
deprecated.
* gnu/services/mcron.scm (mcron-service): Likewise.
* gnu/services/networking.scm (tor-service): Likewise.
* doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and
adjust example.
(Networking Services): Remove 'tor-service'.
* gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of
'mcron-service'.
* gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of
'tor-service'.
* tests/guix-system.sh: Likewise.
| Ludovic Courtès |
| 2018-10-18 | services: dhcp-client: Deprecate 'dhcp-client-service' procedure....* gnu/services/networking.scm (dhcp-client-service-type): Add default
value.
* gnu/system/examples/bare-bones.tmpl: Use (service
dhcp-client-service-type) instead of (dhcp-client-service).
* gnu/system/examples/beaglebone-black.tmpl: Likewise.
* gnu/tests/base.scm (%avahi-os): Likewise.
* gnu/tests/databases.scm (%memcached-os): Likewise.
(%mongodb-os): Likewise.
* gnu/tests/dict.scm (%dicod-os): Likewise.
* gnu/tests/mail.scm (%opensmtpd-os): Likewise.
(%exim-os): Likewise.
(%dovecot-os): Likewise.
* gnu/tests/messaging.scm (run-xmpp-test): Likewise.
(run-bitlbee-test): Likewise.
* gnu/tests/monitoring.scm (%prometheus-node-exporter-os): Likewise.
* gnu/tests/networking.scm (%inetd-os): Likewise.
(run-iptables-test): Likewise.
* gnu/tests/nfs.scm (%base-os): Likewise.
* gnu/tests/rsync.scm (%rsync-os): Likewise.
* gnu/tests/ssh.scm (run-ssh-test): Likewise.
* gnu/tests/version-control.scm (%cgit-os): Likewise.
(%git-http-os): Likewise.
(%gitolite-os): Likewise.
* gnu/tests/virtualization.scm (%libvirt-os): Likewise.
* gnu/tests/web.scm (%httpd-os): Likewise.
(%nginx-os): Likewise.
(%varnish-os): Likewise.
(%php-fpm-os): Likewise.
(%hpcguix-web-os): Likewise.
(%tailon-os): Likewise.
* tests/guix-system.sh: Likewise.
* doc/guix.texi (Networking Services): Document
'dhcp-client-service-type' and remove 'dhcp-client-service'.
| Ludovic Courtès |
| 2018-09-20 | gnu: services: Add iptables service....* gnu/services/networking.scm (<iptables-configuration>): New record type.
(iptables-service-type): New variable.
* gnu/tests/networking.scm (run-iptables-test): New procedure.
(%test-iptables): New variable.
* doc/guix.texi (Networking Services): Document it.
| Arun Isaac |
| 2018-08-28 | services: tor: Make it easier to use UNIX sockets....* doc/guix.texi (Networking Services): Document it, and mention that
tor-service is deprecated.
* gnu/services/networking.scm (<tor-configuration>) <socks-socket-type>:
New field.
(tor-configuration->torrc): When socks-socket-type is 'unix, set
SocksPort to UNIX domain socket /var/run/tor/socks-sock and set
UnixSocksGroupWritable to 1.
* gnu/tests/networking.scm (%tor-os/unix-socks-socket): Instead of using
a custom config file, just set socks-socket-type to 'unix.
| Chris Marusich |
| 2018-08-28 | tests: tor: Add more test cases....* gnu/tests/networking.scm (%tor-os/unix-socks-socket): New variable.
(run-tor-test) <os/unix-socks-socket, marionette/unix-socks-socket>
<socket-directory>: New variables.
<"tor is alive">: Move common code from this test case...
<tor-is-alive?>: ...into this new procedure.
<"tor is listening", "tor is alive, even when using a SOCKS socket">
<"tor is listening, even when using a SOCKS socket">: New test cases.
| Chris Marusich |
| 2018-08-28 | services: tor: Add a system test....* gnu/services/networking.scm (tor-configuration->torrc): Set PidFile to
/var/run/tor/tor.pid in the base torrc configuration.
(tor-shepherd-service) <start>: Call make-forkexec-constructor/container with
a new #:pid-file argument to tell Shepherd where to find the PID file. Add a
a new <file-system-mapping> to its existing #:mappings argument to share
/var/run/tor with the the container.
(tor-hidden-services-activation): Update docstring. Create /var/run/tor and
set its permissions so only the tor user can access it.
* gnu/tests/networking.scm (%test-tor, %tor-os): New variables.
(run-tor-test): New procedure.
| Chris Marusich |
| 2018-04-30 | services: Add modem-manager-service-type....* gnu/services/networking.scm (modem-manager-service-type): New variable.
(<modem-manager-configuration>): New variable.
(modem-manager-configuration): New procedure.
(modem-manager-configuration?): New procedure.
* doc/guix.texi (Networking Services): Document it.
* gnu/tests/networking.scm: Import (gnu services base).
| Danny Milosavljevic |
| 2018-04-21 | services: Add dhcpd-service-type and <dhcpd-configuration>....* doc/guix.texi (Networking Services): Document it.
* gnu/services/networking.scm (dhcpd-service-type): Add it.
(dhcpd-configuration, dhcpd-configuration?): Add it.
(dhcpd-configuration-package): Add it.
(dhcpd-configuration-config-file): Add it.
(dhcpd-configuration-version): Add it.
(dhcpd-configuration-run-directory): Add it.
(dhcpd-configuration-lease-file): Add it.
(dhcpd-configuration-pid-file): Add it.
(dhcpd-configuration-interfaces): Add it.
* gnu/tests/networking.scm (minimal-dhcpd-v4-config-file)
(dhcpd-v4-configuration, %dhcpd-os, run-dhcpd-test, %test-dhcpd): New
variables.
| Chris Marusich |
| 2017-12-29 | tests: networking: Add tests for Open vSwitch....* gnu/tests/networking.scm (openvswitch-configuration-service,
%openvswitch-os): New variables.
(setup-openvswitch, run-openvswitch-test): New procedures.
(%test-openvswitch): New public variable.
| Marius Bakke |
| 2017-07-20 | tests: Use 'virtual-machine' records instead of monadic procedures....* gnu/tests/base.scm (%test-basic-os): Use 'let*' instead of 'mlet*' and
'virtual-machine' instead of 'system-qemu-image/shared-store-script'.
(run-mcron-test): Likewise.
(run-nss-mdns-test): Likewise.
* gnu/tests/dict.scm (run-dicod-test): Likewise.
* gnu/tests/mail.scm (run-opensmtpd-test): Likewise.
(run-exim-test): Likewise.
* gnu/tests/messaging.scm (run-xmpp-test): Likewise.
* gnu/tests/networking.scm (run-inetd-test): Likewise.
* gnu/tests/nfs.scm (run-nfs-test): Likewise.
* gnu/tests/ssh.scm (run-ssh-test): Likewise.
* gnu/tests/web.scm (run-nginx-test): Likewise.
| Ludovic Courtès |
| 2017-04-01 | tests: Introduce 'simple-operating-system' and use it....* gnu/tests.scm (%simple-os): New macro.
(simple-operating-system): New macro.
* gnu/tests/base.scm (%simple-os): Define using 'simple-operating-system'.
(%mcron-os): Use 'simple-operating-system'.
* gnu/tests/mail.scm (%opensmtpd-os): Likewise.
* gnu/tests/messaging.scm (%base-os, os-with-service): Remove.
(run-xmpp-test): Use 'simple-operating-system'.
* gnu/tests/networking.scm (%inetd-os): Likewise.
* gnu/tests/ssh.scm (%base-os, os-with-service): Remove.
(run-ssh-test): Use 'simple-operating-system'.
* gnu/tests/web.scm (%nginx-os): Likewise.
| Ludovic Courtès |
| 2017-03-24 | services: Add inetd-service-type....* gnu/services/networking.scm (<inetd-configuration>, <inetd-entry>): New
record types.
(inetd-config-file, inetd-shepherd-service): New procedures.
(inetd-service-type): New variable.
* doc/guix.texi (Networking Services): Document it.
* gnu/tests/networking.scm: New file.
* gnu/local.mk: Add it.
| Thomas Danckaert |
