| Age | Commit message (Expand) | Author |
|---|
| 2022-11-20 | installer: Add comment above the 'packages' field....* gnu/installer/services.scm (system-services->configuration): Add
heading above the 'packages' field. Rename 'heading' to
'service-heading'.
| Ludovic Courtès |
| 2022-11-15 | installer: Report known-unsupported PCI devices....* gnu/installer/hardware.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer.scm (installer-steps): Pass #:pci-database to the
'welcome' step procedure.
* gnu/installer/newt.scm (welcome-page): Add #:pci-database and pass it
to 'run-welcome-page'.
* gnu/installer/newt/welcome.scm (check-hardware-support): Add #:pci-database.
Enumerate unsupported PCI devices and run an error page when unsupported
devices are found.
(run-welcome-page): Add #:pci-database and pass it to
'check-hardware-support' and to the recursive call.
* gnu/installer/record.scm (<installer>)[welcome-page]: Adjust comment.
* doc/guix.texi (Hardware Considerations): Mention it.
| Ludovic Courtès |
| 2022-11-15 | installer: Error page width is parameterized....* gnu/installer/newt/page.scm (run-error-page): Add #:width and honor
it.
| Ludovic Courtès |
| 2022-11-15 | installer: Warn about hardware support after the welcome page....This is a followup to 682639c107908426fe6bf0a1b8404b98b7820290, which
added the uvesafb upfront, before welcome page had been displayed.
* gnu/installer/newt/welcome.scm (check-hardware-support): New
procedure.
(run-welcome-page): Use it.
| Ludovic Courtès |
| 2022-11-09 | installer: Remove unused variable....* gnu/installer/newt.scm (newt-run-command): Remove
'displayed-command'.
| Ludovic Courtès |
| 2022-11-02 | installer: Skip the backtrace page on user abort....When the user aborts the installation because a core dump is discovered or the
installation command failed, displaying the abort backtrace doesn't make much
sense. Hide it when the abort condition is &user-abort-error and skip directly
to the dump page.
* gnu/installer/steps.scm (&user-abort-error): New variable.
(user-abort-error?): New procedure.
* gnu/installer/newt/final.scm (run-install-failed-page): Raise a
user-abort-error.
* gnu/installer/newt/welcome.scm (run-welcome-page): Ditto.
* gnu/installer.scm (installer-program): Hide the backtrace page and directly
propose to dump the report when the a &user-abort-error is raised.
| Mathieu Othacehe |
| 2022-11-02 | installer: Add core dump support....Fixes: <https://issues.guix.gnu.org/58733>
* gnu/installer.scm (installer-program): Enable core dump generation.
* gnu/installer/dump.scm (%core-dump): New variable.
(prepare-dump): Copy the core dump file.
* gnu/installer/newt/welcome.scm (run-welcome-page): Propose to report an
installation that previously generated a core dump.
| Mathieu Othacehe |
| 2022-10-31 | installer: parted: Retry failing read-partition-uuid call....Fixes: <https://issues.guix.gnu.org/53541>.
* gnu/installer/parted.scm (read-partition-uuid/retry): New procedure.
(check-user-partitions): Use it.
| Mathieu Othacehe |
| 2022-10-25 | installer: welcome: Warn when uvesafb gets used....There will be false positives: Because the Guix installer uses the
kernel argument modprobe.blacklist=radeon,amdgpu and some AMD graphics
actually work okay according to h-node, these users will get a
false alarm.
* gnu/installer/newt/welcome.scm (run-welcome-page): Warn before showing
the welcome page.
| pelzflorian (Florian Pelz) |
| 2022-10-23 | installer: Resume newt in exit-error procedure....Fixes: <https://issues.guix.gnu.org/58734>
* gnu/installer/newt.scm (exit-error): Resume it.
| Mathieu Othacehe |
| 2022-10-20 | installer: Add a missing confirmation page before formatting....This is a follow-up of: <https://issues.guix.gnu.org/57232>
* gnu/installer/newt/partition.scm (run-label-page): Add a confirmation page
when dealing with an EFI installation.
| Mathieu Othacehe |
| 2022-10-20 | installer: Propose the user to report a "guix system init" failure....* gnu/installer/newt/final.scm (run-install-failed-page): Add a "Report the
failure" button.
| Mathieu Othacehe |
| 2022-10-20 | installer: Run the "guix system init" command in a PTY....Fixes: <https://issues.guix.gnu.org/55360>
* gnu/installer/utils.scm (run-external-command-with-handler/tty): New
procedure.
(run-external-command-with-line-hooks, run-command): Add a TTY? argument.
* gnu/installer/final.scm (install-system): Call run-command with TTY?
argument set to #true.
| Mathieu Othacehe |
| 2022-10-17 | installer: Factorize url-alive? in internet check....* gnu/installer/newt/network.scm (wait-service-online): Factorize url-alive?
in internet check.
| Andrew Tropin |
| 2022-10-17 | installer: Relax internet check availability criteria....Checks the availability of the mirror bordeaux.guix.gnu.org in addition to
ci.guix.gnu.org. This allows to proceed the installation if the
ci.guix.gnu.org is unavailable.
* gnu/installer/newt/network.scm (wait-service-online): Relax internet check
availability criteria.
Signed-off-by: Andrew Tropin <andrew@trop.in>
| aleksandr barakin |
| 2022-10-17 | guix: Fix typos....These typos were found and reported through weblate.
* gnu/packages/audio.scm (wildmidi)[description]: Fix typo.
* gnu/packages/games.scm (cgoban)[description]: Fix typo.
* gnu/services/version-control.scm (gitolite-service-type)[description]:
Fix typo.
* gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full
stop at end of title.
* gnu/machine/ssh.scm (machine-ssh-configuration-system): Move
punctuation outside of quotes.
* guix/scripts/home.scm (process-action): Remove trailing space before
newline.
* guix/scripts/system.scm (show-help): Fix typo.
* guix/scripts/environment.scm (with-store/maybe): Fix typo.
| Julien Lepiller |
| 2022-10-13 | installer: partition: Add a confirmation page before formatting....Fixes: <https://issues.guix.gnu.org/57232>.
* gnu/installer/newt/partition.scm (run-label-confirmation-page): New
procedure.
(run-label-page): Call the above procedure before proceeding.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Mathieu Othacehe |
| 2022-09-24 | installer: tests: Fix typo....* gnu/installer/tests.scm (edit-configuration-file): Fix it.
| Mathieu Othacehe |
| 2022-09-24 | installer: Fix configuration edition during testing....When the configuration is edited, it looks like there are some leftover
fragments from the input configuration:
Example content of config.scm after edition:
#:imported-modules
'((gnu services herd)
(guix build utils)
(guix combinators)))
unted". The unique
;; file system identifiers there ("UUIDs") can be obtained
;; by running 'blkid' in a terminal.
...
This is strange because call-with-output-file uses the O_TRUNC flag which
resets the file size to zero. Remove the configuration file before writing it
as a work-around.
* gnu/installer/tests.scm (edit-configuration-file): Remove the configuration
file before re-writing it.
| Mathieu Othacehe |
| 2022-09-22 | installer: Exit console-services page with abort-to-prompt....* gnu/installer/newt/services.scm (run-console-services-cbt-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Ensure luks devices are open when mounting partitions....Partially-Fixes: <https://issues.guix.gnu.org/57983>
* gnu/installer/parted.scm (luks-ensure-open): New procedure.
(unmount-user-partitions): Ensure luks devices are open.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Return partitions with crypt password as step result....* gnu/installer/newt/partition.scm (run-partitioning-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Move <secret> to utils and use it for crypt passwords....* gnu/installer/user.scm (<secret>, secret?, make-secret, secret-content): Move
to utils.scm.
* gnu/installer/utils.scm (<secret>, secret?, make-secret, secret-content):
Moved from user.scm.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Make password a
<secret>.
* gnu/installer/parted.scm (luks-format-and-open): Unwrap secret.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-01 | installer: Fix segfault on double logical partition removal....* gnu/installer/parted.scm (auto-partition!): Avoid removing logical
partitions twice.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-08-14 | installer: parted: Don't export WITH-DELAY-DEVICE-IN-USE?....* gnu/installer/parted.scm: Remove WITH-DELAY-DEVICE-IN-USE? from the
module's export list.
| Tobias Geerinckx-Rice |
| 2022-08-08 | installer: Add comments and vertical space to the generated config....* gnu/installer/parted.scm (user-partitions->configuration): Introduce
vertical space and a comment.
* gnu/installer/services.scm (G_): New macro.
(%system-services): Add comment for OpenSSH.
(system-services->configuration): Add vertical space and comments.
* gnu/installer/user.scm (users->configuration): Add comment.
* gnu/installer/steps.scm (format-configuration): Add comment.
(configuration->file): Expound leading comment. Pass #:format-comment
to 'pretty-print-with-comments/splice'.
| Ludovic Courtès |
| 2022-08-08 | installer: Render the final configuration with (guix read-print)....* gnu/installer.scm (module-to-import?): Return #t for (guix read-print).
* gnu/installer/steps.scm (configuration->file): Use
'pretty-print-with-comments/splice' instead of 'for-each' and 'pretty-print'.
| Ludovic Courtès |
| 2022-08-05 | installer: parted: Call set-system before set-flags....Parted 3.5 introduces the following regression:
- partition-set-flag sets the BIOS_GRUB flag. The partition type is set to
PARTITION_BIOS_GRUB_GUID.
- partition-set-system resets the partition type to PARTITION_LINUX_DATA_GUID
undoing what's done by partition-set-flag.
To prevent it, reverse the call order.
Fixes: <https://issues.guix.gnu.org/55549>.
* gnu/installer/parted.scm (mkpart): Call partition-set-system before
partition-set-flag.
| Mathieu Othacehe |
| 2022-08-05 | installer: parted: Log partition flags....* gnu/installer/parted.scm (mkpart): Log them.
| Mathieu Othacehe |
| 2022-05-21 | Revert "installer: user: Remove useless filtering."...This reverts commit c2125e59d0774cda3e559adeb056459a5f23586b.
Fixes <https://issues.guix.gnu.org/55361>.
| Ludovic Courtès |
| 2022-04-06 | installer: user: Remove useless filtering....* gnu/installer/user.scm (users->configuration): Remove root account filtering
that is now performed in the "run-user-add-page" procedure.
| Mathieu Othacehe |
| 2022-04-06 | installer: user: Forbid root user creation....Forbid root user creation as it could lead to a system without any
non-priviledged user accouts.
Fixes: <https://issues.guix.gnu.org/54666>.
* gnu/installer/newt/user.scm (run-user-add-page): Forbid it.
| Mathieu Othacehe |
| 2022-03-01 | initrd: Use non-hyphenated kernel command-line parameter names....This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
| Maxim Cournoyer |
| 2022-02-26 | installer: Continue even if Connman cannot phone home....Connman's online check is unreliable for me.
* gnu/installer/connman.scm (connman-online?): Accept if
connman state is ready instead of online.
| Florian Pelz |
| 2022-02-02 | installer: Use system-wide guix for system init....* gnu/installer.scm (installer-program): Remove dependency on the guix
package for the PATH.
* gnu/installer/final.scm (install-system): Set PATH inside container
to /run/current-system/profile/bin/.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Make dump archive creation optional and selective....* gnu/installer.scm (installer-program): Let the installer customize
the dump archive.
* gnu/installer/dump.scm (prepare-dump, make-dump): Split make-dump in
prepare-dump, which copies the files necessary for the dump, and
make-dump which creates the archive.
* gnu/installer/record.scm (installer): Add report-page field. Change
documented return value of exit-error.
* gnu/installer/newt.scm (exit-error): Change arguments to be a string
containing the error. Let the user choose between exiting and
initiating a dump.
(report-page): Add new variable.
* gnu/installer/newt/page.scm (run-dump-page): New variable.
* gnu/installer/newt/dump.scm: Delete it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Turn passwords into opaque records....* gnu/installer/user.scm (<secret>, secret?, make-secret,
secret-content): Add opaque <secret> record that boxes its contents,
with a custom printer that doesn't display anything.
* gnu/installer/newt/user.scm (run-user-add-page, run-user-page): Box
it.
* gnu/installer/final.scm (create-user-database): Unbox it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Add error page when running external commands....* gnu/installer/newt.scm (newt-run-command): Add it.
* gnu/installer/newt/page.scm (%ok-button, %exit-button,
%default-buttons, make-newt-buttons, run-textbox-page): Add them.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use named prompt to abort or break installer steps....* gnu/installer/steps.scm (run-installer-steps): Set up
'installer-step prompt.
* gnu/installer/newt/ethernet.scm (run-ethernet-page)
* gnu/installer/newt/final.scm (run-config-display-page,
run-install-failed-page)
* gnu/installer/newt/keymap.scm (run-layout-page, run-variant-page)
* gnu/installer/newt/locale.scm (run-language-page,
run-territory-page, run-codeset-page, run-modifier-page,
run-locale-page)
* gnu/installer/newt/network.scm (run-technology-page,
wait-service-online)
* gnu/installer/newt/page.scm (run-listbox-selection-page,
run-checkbox-tree-page)
* gnu/installer/newt/partition.scm (button-exit-action)
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page,
run-networking-cbt-page, run-other-services-cbt-page,
run-network-management-page)
* gnu/installer/newt/timezone.scm (run-timezone-page)
* gnu/installer/newt/user.scm (run-user-page)
* gnu/installer/newt/welcome.scm (run-menu-page)
* gnu/installer/newt/wifi.scm (run-wifi-page): Use the 'installer-step
prompt to abort.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Replace run-command by invoke in newt/page.scm....* gnu/installer/newt/page.scm (edit-file): Replace it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Fix run-file-textbox-page when edit-button is #f....* gnu/installer/newt/page.scm (run-file-textbox-page): Check if
edit-button is #f.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Raise condition when mklabel fails....* gnu/installer/parted.scm (mklabel): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use run-command-in-installer in (gnu installer parted)....* gnu/installer/parted.scm (remove-logical-devices,
create-btrfs-file-system, create-ext4-file-system,
create-fat16-file-system, create-fat32-file-system,
create-jfs-file-system, create-ntfs-file-system,
create-xfs-file-system, create-swap-partition, luks-format-and-open,
luks-close): Use run-command-in-installer.
(with-null-output-ports): Remove.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Add installer-specific run command process....* gnu/installer/record.scm (installer)[run-command]: Add field.
* gnu/installer/utils.scm (run-command-in-installer): Add parameter.
* gnu/installer.scm (installer-program): Parameterize
run-command-in-installer with current installer's run-command.
* gnu/installer/newt.scm (newt-run-command): New variable.
(newt-installer): Use it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Capture external commands output....* gnu/installer/utils.scm (run-external-command-with-handler,
run-external-command-with-line-hooks): New variables.
(run-command): Use run-external-command-with-line-hooks.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Remove specific logging code....* gnu/installer/final.scm (install-system): Remove command logging to
syslog, as this is taken care of by the new facilities.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Keep PATH inside the install container....* gnu/installer/final.scm (install-system): Set PATH inside the
container.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Un-export syslog syntax....* gnu/installer/utils.scm (syslog): Remove export.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use new installer-log-line everywhere....* gnu/installer.scm (installer-program)
* gnu/installer/final.scm (install-locale)
* gnu/installer/newt.scm (init)
* gnu/installer/newt/final.scm (run-final-page)
* gnu/installer/newt/page.scm (run-form-with-clients)
* gnu/installer/newt/partition.scm (run-partitioning-page)
* gnu/installer/parted.scm (eligible-devices, mkpart,
luks-format-and-open, luks-close, mount-user-partitions,
umount-user-partitions, free-parted):
* gnu/installer/steps.scm (run-installer-steps):
* gnu/installer/utils.scm (run-command, send-to-clients): Use it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Generalize logging facility....* gnu/installer/utils.scm (%syslog-line-hook, open-new-log-port,
installer-log-port, %installer-log-line-hook, %display-line-hook,
%default-installer-line-hooks, installer-log-line): Add new
variables.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
