| Age | Commit message (Expand) | Author |
|---|
| 2024-04-03 | Switch order of the default substitute servers....The aim here is to improve the user experience. There's anecdotal evidence
that the network performance for bordeaux is better compared to ci at least
for some users, and I don't know of any issues with rate limiting or access
restriction for bordeaux compared to ci. It also has IPv6 support.
Additionally, bordeaux generally had more substitutes than ci, particularly
for aarch64-linux and armhf-linux. This change will offer a very slight
speedup for those substitutes that only bordeaux has.
Bordeaux has been a default substitute server for nearly 3 years now and I
think this change is overdue. I'm also hopeful that we'll be able to build on
the testing regarding mirrors for bordeaux, and that'll allow potentially
improving the hosting setup (through providing more redundancy) and further
improving substitute fetching for users who currently have issues with
substitute access.
* config-daemon.ac: Switch substitute urls order.
* doc/guix.texi: Ditto.
* etc/guix-install.sh: Ditto.
* gnu/installer/newt/network.scm (wait-service-online): Ditto.
* guix/store.scm (%default-substitute-urls): Ditto.
Change-Id: I4f6d93ae1fc8b03d80b47b18b5749a51f1fde17b
Signed-off-by: Christopher Baines <mail@cbaines.net>
| Christopher Baines |
| 2022-11-15 | installer: Report known-unsupported PCI devices....* gnu/installer/hardware.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer.scm (installer-steps): Pass #:pci-database to the
'welcome' step procedure.
* gnu/installer/newt.scm (welcome-page): Add #:pci-database and pass it
to 'run-welcome-page'.
* gnu/installer/newt/welcome.scm (check-hardware-support): Add #:pci-database.
Enumerate unsupported PCI devices and run an error page when unsupported
devices are found.
(run-welcome-page): Add #:pci-database and pass it to
'check-hardware-support' and to the recursive call.
* gnu/installer/record.scm (<installer>)[welcome-page]: Adjust comment.
* doc/guix.texi (Hardware Considerations): Mention it.
| Ludovic Courtès |
| 2022-11-15 | installer: Error page width is parameterized....* gnu/installer/newt/page.scm (run-error-page): Add #:width and honor
it.
| Ludovic Courtès |
| 2022-11-15 | installer: Warn about hardware support after the welcome page....This is a followup to 682639c107908426fe6bf0a1b8404b98b7820290, which
added the uvesafb upfront, before welcome page had been displayed.
* gnu/installer/newt/welcome.scm (check-hardware-support): New
procedure.
(run-welcome-page): Use it.
| Ludovic Courtès |
| 2022-11-02 | installer: Skip the backtrace page on user abort....When the user aborts the installation because a core dump is discovered or the
installation command failed, displaying the abort backtrace doesn't make much
sense. Hide it when the abort condition is &user-abort-error and skip directly
to the dump page.
* gnu/installer/steps.scm (&user-abort-error): New variable.
(user-abort-error?): New procedure.
* gnu/installer/newt/final.scm (run-install-failed-page): Raise a
user-abort-error.
* gnu/installer/newt/welcome.scm (run-welcome-page): Ditto.
* gnu/installer.scm (installer-program): Hide the backtrace page and directly
propose to dump the report when the a &user-abort-error is raised.
| Mathieu Othacehe |
| 2022-11-02 | installer: Add core dump support....Fixes: <https://issues.guix.gnu.org/58733>
* gnu/installer.scm (installer-program): Enable core dump generation.
* gnu/installer/dump.scm (%core-dump): New variable.
(prepare-dump): Copy the core dump file.
* gnu/installer/newt/welcome.scm (run-welcome-page): Propose to report an
installation that previously generated a core dump.
| Mathieu Othacehe |
| 2022-10-25 | installer: welcome: Warn when uvesafb gets used....There will be false positives: Because the Guix installer uses the
kernel argument modprobe.blacklist=radeon,amdgpu and some AMD graphics
actually work okay according to h-node, these users will get a
false alarm.
* gnu/installer/newt/welcome.scm (run-welcome-page): Warn before showing
the welcome page.
| pelzflorian (Florian Pelz) |
| 2022-10-20 | installer: Add a missing confirmation page before formatting....This is a follow-up of: <https://issues.guix.gnu.org/57232>
* gnu/installer/newt/partition.scm (run-label-page): Add a confirmation page
when dealing with an EFI installation.
| Mathieu Othacehe |
| 2022-10-20 | installer: Propose the user to report a "guix system init" failure....* gnu/installer/newt/final.scm (run-install-failed-page): Add a "Report the
failure" button.
| Mathieu Othacehe |
| 2022-10-17 | installer: Factorize url-alive? in internet check....* gnu/installer/newt/network.scm (wait-service-online): Factorize url-alive?
in internet check.
| Andrew Tropin |
| 2022-10-17 | installer: Relax internet check availability criteria....Checks the availability of the mirror bordeaux.guix.gnu.org in addition to
ci.guix.gnu.org. This allows to proceed the installation if the
ci.guix.gnu.org is unavailable.
* gnu/installer/newt/network.scm (wait-service-online): Relax internet check
availability criteria.
Signed-off-by: Andrew Tropin <andrew@trop.in>
| aleksandr barakin |
| 2022-10-17 | guix: Fix typos....These typos were found and reported through weblate.
* gnu/packages/audio.scm (wildmidi)[description]: Fix typo.
* gnu/packages/games.scm (cgoban)[description]: Fix typo.
* gnu/services/version-control.scm (gitolite-service-type)[description]:
Fix typo.
* gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full
stop at end of title.
* gnu/machine/ssh.scm (machine-ssh-configuration-system): Move
punctuation outside of quotes.
* guix/scripts/home.scm (process-action): Remove trailing space before
newline.
* guix/scripts/system.scm (show-help): Fix typo.
* guix/scripts/environment.scm (with-store/maybe): Fix typo.
| Julien Lepiller |
| 2022-10-13 | installer: partition: Add a confirmation page before formatting....Fixes: <https://issues.guix.gnu.org/57232>.
* gnu/installer/newt/partition.scm (run-label-confirmation-page): New
procedure.
(run-label-page): Call the above procedure before proceeding.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Mathieu Othacehe |
| 2022-09-22 | installer: Exit console-services page with abort-to-prompt....* gnu/installer/newt/services.scm (run-console-services-cbt-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Return partitions with crypt password as step result....* gnu/installer/newt/partition.scm (run-partitioning-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Move <secret> to utils and use it for crypt passwords....* gnu/installer/user.scm (<secret>, secret?, make-secret, secret-content): Move
to utils.scm.
* gnu/installer/utils.scm (<secret>, secret?, make-secret, secret-content):
Moved from user.scm.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Make password a
<secret>.
* gnu/installer/parted.scm (luks-format-and-open): Unwrap secret.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-04-06 | installer: user: Forbid root user creation....Forbid root user creation as it could lead to a system without any
non-priviledged user accouts.
Fixes: <https://issues.guix.gnu.org/54666>.
* gnu/installer/newt/user.scm (run-user-add-page): Forbid it.
| Mathieu Othacehe |
| 2022-02-02 | installer: Make dump archive creation optional and selective....* gnu/installer.scm (installer-program): Let the installer customize
the dump archive.
* gnu/installer/dump.scm (prepare-dump, make-dump): Split make-dump in
prepare-dump, which copies the files necessary for the dump, and
make-dump which creates the archive.
* gnu/installer/record.scm (installer): Add report-page field. Change
documented return value of exit-error.
* gnu/installer/newt.scm (exit-error): Change arguments to be a string
containing the error. Let the user choose between exiting and
initiating a dump.
(report-page): Add new variable.
* gnu/installer/newt/page.scm (run-dump-page): New variable.
* gnu/installer/newt/dump.scm: Delete it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Turn passwords into opaque records....* gnu/installer/user.scm (<secret>, secret?, make-secret,
secret-content): Add opaque <secret> record that boxes its contents,
with a custom printer that doesn't display anything.
* gnu/installer/newt/user.scm (run-user-add-page, run-user-page): Box
it.
* gnu/installer/final.scm (create-user-database): Unbox it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Add error page when running external commands....* gnu/installer/newt.scm (newt-run-command): Add it.
* gnu/installer/newt/page.scm (%ok-button, %exit-button,
%default-buttons, make-newt-buttons, run-textbox-page): Add them.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use named prompt to abort or break installer steps....* gnu/installer/steps.scm (run-installer-steps): Set up
'installer-step prompt.
* gnu/installer/newt/ethernet.scm (run-ethernet-page)
* gnu/installer/newt/final.scm (run-config-display-page,
run-install-failed-page)
* gnu/installer/newt/keymap.scm (run-layout-page, run-variant-page)
* gnu/installer/newt/locale.scm (run-language-page,
run-territory-page, run-codeset-page, run-modifier-page,
run-locale-page)
* gnu/installer/newt/network.scm (run-technology-page,
wait-service-online)
* gnu/installer/newt/page.scm (run-listbox-selection-page,
run-checkbox-tree-page)
* gnu/installer/newt/partition.scm (button-exit-action)
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page,
run-networking-cbt-page, run-other-services-cbt-page,
run-network-management-page)
* gnu/installer/newt/timezone.scm (run-timezone-page)
* gnu/installer/newt/user.scm (run-user-page)
* gnu/installer/newt/welcome.scm (run-menu-page)
* gnu/installer/newt/wifi.scm (run-wifi-page): Use the 'installer-step
prompt to abort.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Replace run-command by invoke in newt/page.scm....* gnu/installer/newt/page.scm (edit-file): Replace it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Fix run-file-textbox-page when edit-button is #f....* gnu/installer/newt/page.scm (run-file-textbox-page): Check if
edit-button is #f.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use new installer-log-line everywhere....* gnu/installer.scm (installer-program)
* gnu/installer/final.scm (install-locale)
* gnu/installer/newt.scm (init)
* gnu/installer/newt/final.scm (run-final-page)
* gnu/installer/newt/page.scm (run-form-with-clients)
* gnu/installer/newt/partition.scm (run-partitioning-page)
* gnu/installer/parted.scm (eligible-devices, mkpart,
luks-format-and-open, luks-close, mount-user-partitions,
umount-user-partitions, free-parted):
* gnu/installer/steps.scm (run-installer-steps):
* gnu/installer/utils.scm (run-command, send-to-clients): Use it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Add crash dump upload support....Suggested-by: Josselin Poiret <dev@jpoiret.xyz>
* gnu/installer/dump.scm: New file.
* gnu/installer/newt/dump.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* gnu/installer/record.scm (<installer>)[dump-page]: New field.
* gnu/installer/steps.scm (%current-result): New variable.
(run-installer-steps): Update it.
* gnu/installer.scm (installer-program): Add tar and gip to the installer
path. Add guile-webutils and gnutls to the Guile extensions. Generate and send
the crash dump report.
* gnu/installer/newt.scm (exit-error): Add a report argument. Display the
report id.
(dump-page): New procedure.
(newt-installer): Update it.
| Mathieu Othacehe |
| 2022-01-14 | installer: Check if ci.guix.gnu.org can be reached....* gnu/installer.scm (installer-program): Add gnutls extension.
* gnu/installer/newt/network.scm (wait-service-online): Check if the CI server
can be reached.
| Mathieu Othacehe |
| 2022-01-14 | installer: Ignore small devices....Filter the devices that are smaller than 2GiB in the device selection list.
* gnu/installer/parted.scm (%min-device-size): New variable.
(non-install-devices): Rename it ...
(eligible-devices): ... this way. Filter the install device as well as the
small devices.
* gnu/installer/newt/partition.scm (run-partitioning-page): Adapt it.
| Mathieu Othacehe |
| 2021-12-28 | installer: Recommend 'ntp-service-type' for non-graphical systems....We had several bug reports with a root cause of "the clock was
incorrect" from users who used the installer to install a non-graphical
Guix System.
* gnu/installer/services.scm (%system-services): Add the ntp-service-type.
* gnu/installer/newt/services.scm (run-system-administration-cbt-page): New
variable.
(run-services-page): Use run-system-administration-cbt-page when not
installing a desktop.
* gnu/installer/tests.scm (choose-services): Add and use a
choose-misc-service? procedure.
* gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add
ntp-service-type.
| Leo Famulari |
| 2021-12-28 | installer: Offer the CUPS printing service on a dedicated page....Currently, the installer page RUN-OTHER-SERVICES-CBT-PAGE offers to the user all
installer services that are not of the types 'desktop', 'network-management', or
'networking'. Concretely, this means that it offers the CUPS printing service,
because that is the only service of a different type defined in the installer.
In later commits, we will add some services of a new type, and we only want them
to be offered when the user is installing a non-graphical system.
At least one of these new services (NTP) is part of %DESKTOP-SERVICES. If it
was also offered on RUN-OTHER-SERVICES-CBT-PAGE, and the user had configured a
system using %DESKTOP-SERVICES, the user could accidentally add NTP to their
services twice, which is an error and would break installation.
So, this commit makes the RUN-OTHER-SERVICES-CBT-PAGE be more specific about
what services to offer. This makes it easier to discriminate between desktop and
non-desktop installations, in terms of when a given service is offered.
* gnu/installer/newt/services.scm (RUN-OTHER-SERVICES-CBT-PAGE): Rename to ...
(RUN-PRINTING-SERVICES-CBT-PAGE): ... new variable, and select only 'document' services.
(RUN-SERVICES-PAGE): Adjust accordingly.
* gnu/installer/tests.scm (CHOOSE-SERVICES): Adjust accordingly.
| Leo Famulari |
| 2021-10-21 | installer: Reorder file system type listbox....Recommending ext4 over btrfs is probably ill-advised nowadays. See the
regular bug reports about running out of /gnu/store directory entries,
for which the documented fix then breaks booting with GRUB.
Instead, just list regular file systems alphabetically. We can bikeshed
bcachefs later ;-)
Move second-class file systems like NTFS to their own section at the end
of the list.
* gnu/packages/package-management.scm (run-fs-type-page): Reorder the
LISTBOX-ITEMS.
| Tobias Geerinckx-Rice |
| 2021-09-23 | installer: Support XFS....* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘xfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘xfs’ mapping.
(create-xfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add xfsprogs.
| Tobias Geerinckx-Rice |
| 2021-06-30 | installer: Offer the CUPS printing service....* gnu/installer/services.scm (%system-services): Add CUPS.
* gnu/installer/newt/services.scm (run-other-services-cbt-page):
New procedure.
(run-services-page): Call it last.
| Tobias Geerinckx-Rice |
| 2021-06-29 | installer: Fix crash when deleting a free space partition....Fixes: <https://issues.guix.gnu.org/49126>.
* gnu/installer/newt/partition.scm (run-disk-page): Fix the return value when
removing a free space partition.
| Mathieu Othacehe |
| 2021-06-12 | installer: Check partitions UUIDs....* gnu/installer/parted.scm (&cannot-read-uuid): New condition.
(cannot-read-uuid?, cannot-read-uuid-partition): New procedures.
(check-user-partitions): Check that all user-partitions have a valid UUID,
raide the above condition otherwise.
* gnu/installer/newt/partition.scm (run-disk-page): Run an error page if the
&cannot-read-uuid condition is raised.
| Mathieu Othacehe |
| 2021-06-12 | installer: Print user partitions....* gnu/installer/newt/partition.scm (run-partitioning-page): Print
user-partitions to syslog.
| Mathieu Othacehe |
| 2021-04-28 | installer: Force GPT disk label when UEFI is supported....* gnu/installer/newt/partition.scm (run-label-page): Force the GPT disk label
when UEFI is supported.
| Mathieu Othacehe |
| 2021-01-31 | installer: Edit desktop selection prompt....* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page):
Fix and clarify the #:info-text.
| Tobias Geerinckx-Rice |
| 2021-01-12 | installer: Fix crash in parameters menu....Fixes: <https://issues.guix.gnu.org/45378>.
* gnu/installer/newt/keymap.scm (run-layout-page): Return false when
"Continue" button is pressed.
(run-keymap-page): Do not try to compute variants if layout is false. Also do
not try to format the result if layout is false.
* gnu/installer.scm (compute-keymap-step): Do not apply keymap if
"run-keymap-page" returns false.
| Mathieu Othacehe |
| 2020-12-11 | install: Discover local substitute servers....* gnu/installer/substitutes.scm: New file.
* gnu/installer/newt/substitutes.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* po/guix/POTFILES.in: Add gnu/installer/newt/substitutes.scm.
* gnu/installer/proxy.scm (with-silent-shepherd): Move to ...
* gnu/installer/utils.scm: ... here.
* gnu/installer/record.scm (<installer>)[substitutes-page]: New field.
* gnu/installer/newt.scm (substitutes-page): New procedure,
(newt-installer): register it.
* gnu/installer.scm (installer-steps): Add "substitutes-page" step.
* gnu/system/install.scm (%installation-services): Add avahi-service-type and
enable substitute server discover in guix-service-type.
[<name-service-switch>]: Set it to %mdns-host-lookup-nss.
| Mathieu Othacehe |
| 2020-11-07 | installer: parameters: Add a reboot button....Suggested by: zimoun <zimon.toutoune@gmail.com>.
* gnu/installer/newt/parameters.scm (run-parameters-page): Add a reboot
button.
| Mathieu Othacehe |
| 2020-11-07 | installer: Edit partitioning warning message....* gnu/installer/newt/partition.scm (draw-formatting-page): Add an extra new
line.
| Mathieu Othacehe |
| 2020-11-07 | installer: Limit listbox height....Fixes: <https://issues.guix.gnu.org/44428>.
* gnu/installer/newt.scm (init): Print screen size.
* gnu/installer/newt/page.scm (default-listbox-height): New variable.
(run-listbox-selection-page): Use it.
* gnu/installer/newt/wifi.scm (wifi-listbox-height): Ditto.
* gnu/installer/newt/network.scm (run-technology-page): Set the maximum
listbox height to 5.
* gnu/installer/newt/ethernet.scm (run-ethernet-page): Ditto.
* gnu/installer/newt/final.scm (run-config-display-page): Change listbox
height.
* gnu/installer/newt/partition.scm (run-disk-page): Ditto.
* gnu/installer/newt/welcome.scm (display-logo?): New procedure.
(run-menu-page): Use it.
* gnu/installer/steps.scm (%configuration-file-width): Remove it.
| Mathieu Othacehe |
| 2020-11-02 | installer: Report to the user the formatted partitions....* gnu/installer/newt/partitions.scm (define-module): Use (ice-9 format).
(draw-formatting-page): Add parameter partitions and provide the list of
formatted partitions to the user.
(run-partitioning-page): Provide user-partitions to draw-formatting-page.
| Miguel Ángel Arruga Vivas |
| 2020-10-30 | installer: Use UUIDs in the 'swap-devices' field....Note: This change requires an updated 'guix' package that contains
Linux-swap support in (gnu build file-systems).
* gnu/installer/parted.scm (user-partitions->configuration): Use UUIDs
in the 'swap-devices' field.
* gnu/installer/newt/final.scm (run-final-page)[wait-for-clients]: New
procedure. Use it.
* gnu/installer/tests.scm (choose-partitioning): Wait for
'starting-final-step' message and move configuration file dialog
handling to...
(conclude-installation): ... here. Send over PORT the reply
corresponding to 'starting-final-step'.
* gnu/tests/install.scm (gui-test-program): When ENCRYPTED? is false,
invoke 'swaplabel' in the marionette.
(installation-target-os-for-gui-tests): When ENCRYPTED? is false, except
a fixed UUID.
| Ludovic Courtès |
| 2020-10-28 | installer: Log partition formatting....* gnu/installer/newt/partition.scm (run-partitioning-page): Add 'syslog' call.
| Ludovic Courtès |
| 2020-10-23 | installer: Make the network management selection window tighter....* gnu/installer/newt/services.scm (run-network-management-page): Pass
#:listbox-height.
| Ludovic Courtès |
| 2020-10-13 | installer: Add Emacs EXWM desktop environment....Suggested by zenny via IRC.
* gnu/installer/services.scm (%system-services): Add emacs, emacs-exwm,
emacs-desktop-environment.
* etc/release-manifest.scm (%system-packages): Likewise.
* gnu/system/examples/lightweight-desktop.tmpl: Likewise.
* gnu/tests/install.scm (installation-target-desktop-os-for-gui-tests)
[packages]: Likewise
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page): Make
one entry taller.
| Jan (janneke) Nieuwenhuizen |
| 2020-09-21 | installer: Rename RUN-PARTIONING-PAGE....* gnu/installer/newt/partition.scm (run-partioning-page): Rename to
run-partitioning-page. Adjust all callers.
| Tobias Geerinckx-Rice |
| 2020-09-21 | installer: Fix docstring typoes....* gnu/installer/connman.scm (connman-state, run-locale-page)
(start-swapping, stop-swapping, run-installer-steps): Fix typo in
docstring.
| Tobias Geerinckx-Rice |
| 2020-09-02 | installer: Run the installation inside a container....When the store overlay is mounted, other processes such as kmscon, udev
and guix-daemon may open files from the store, preventing the
underlying install support from being umounted. See:
https://lists.gnu.org/archive/html/guix-devel/2018-12/msg00161.html.
To avoid this situation, mount the store overlay inside a container,
and run the installation from within that container.
* gnu/build/shepherd.scm (fork+exec-command/container): New procedure.
* gnu/services/base.scm (guix-shepherd-service): Support an optional PID
argument passed to the "start" method. If that argument is passed, ensure that
guix-daemon enters the given PID MNT namespace by using
fork+exec-command/container procedure.
* gnu/installer/final.scm (umount-cow-store): Remove it,
(install-system): run the installation from within a container.
* gnu/installer/newt/final.scm (run-install-shell): Remove the display hack.
| Mathieu Othacehe |
