| Age | Commit message (Expand) | Author |
|---|
| 2022-11-15 | installer: Report known-unsupported PCI devices....* gnu/installer/hardware.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer.scm (installer-steps): Pass #:pci-database to the
'welcome' step procedure.
* gnu/installer/newt.scm (welcome-page): Add #:pci-database and pass it
to 'run-welcome-page'.
* gnu/installer/newt/welcome.scm (check-hardware-support): Add #:pci-database.
Enumerate unsupported PCI devices and run an error page when unsupported
devices are found.
(run-welcome-page): Add #:pci-database and pass it to
'check-hardware-support' and to the recursive call.
* gnu/installer/record.scm (<installer>)[welcome-page]: Adjust comment.
* doc/guix.texi (Hardware Considerations): Mention it.
| Ludovic Courtès |
| 2022-11-15 | installer: Error page width is parameterized....* gnu/installer/newt/page.scm (run-error-page): Add #:width and honor
it.
| Ludovic Courtès |
| 2022-11-15 | installer: Warn about hardware support after the welcome page....This is a followup to 682639c107908426fe6bf0a1b8404b98b7820290, which
added the uvesafb upfront, before welcome page had been displayed.
* gnu/installer/newt/welcome.scm (check-hardware-support): New
procedure.
(run-welcome-page): Use it.
| Ludovic Courtès |
| 2022-11-02 | installer: Skip the backtrace page on user abort....When the user aborts the installation because a core dump is discovered or the
installation command failed, displaying the abort backtrace doesn't make much
sense. Hide it when the abort condition is &user-abort-error and skip directly
to the dump page.
* gnu/installer/steps.scm (&user-abort-error): New variable.
(user-abort-error?): New procedure.
* gnu/installer/newt/final.scm (run-install-failed-page): Raise a
user-abort-error.
* gnu/installer/newt/welcome.scm (run-welcome-page): Ditto.
* gnu/installer.scm (installer-program): Hide the backtrace page and directly
propose to dump the report when the a &user-abort-error is raised.
| Mathieu Othacehe |
| 2022-11-02 | installer: Add core dump support....Fixes: <https://issues.guix.gnu.org/58733>
* gnu/installer.scm (installer-program): Enable core dump generation.
* gnu/installer/dump.scm (%core-dump): New variable.
(prepare-dump): Copy the core dump file.
* gnu/installer/newt/welcome.scm (run-welcome-page): Propose to report an
installation that previously generated a core dump.
| Mathieu Othacehe |
| 2022-10-25 | installer: welcome: Warn when uvesafb gets used....There will be false positives: Because the Guix installer uses the
kernel argument modprobe.blacklist=radeon,amdgpu and some AMD graphics
actually work okay according to h-node, these users will get a
false alarm.
* gnu/installer/newt/welcome.scm (run-welcome-page): Warn before showing
the welcome page.
| pelzflorian (Florian Pelz) |
| 2022-10-20 | installer: Add a missing confirmation page before formatting....This is a follow-up of: <https://issues.guix.gnu.org/57232>
* gnu/installer/newt/partition.scm (run-label-page): Add a confirmation page
when dealing with an EFI installation.
| Mathieu Othacehe |
| 2022-10-20 | installer: Propose the user to report a "guix system init" failure....* gnu/installer/newt/final.scm (run-install-failed-page): Add a "Report the
failure" button.
| Mathieu Othacehe |
| 2022-10-17 | installer: Factorize url-alive? in internet check....* gnu/installer/newt/network.scm (wait-service-online): Factorize url-alive?
in internet check.
| Andrew Tropin |
| 2022-10-17 | installer: Relax internet check availability criteria....Checks the availability of the mirror bordeaux.guix.gnu.org in addition to
ci.guix.gnu.org. This allows to proceed the installation if the
ci.guix.gnu.org is unavailable.
* gnu/installer/newt/network.scm (wait-service-online): Relax internet check
availability criteria.
Signed-off-by: Andrew Tropin <andrew@trop.in>
| aleksandr barakin |
| 2022-10-17 | guix: Fix typos....These typos were found and reported through weblate.
* gnu/packages/audio.scm (wildmidi)[description]: Fix typo.
* gnu/packages/games.scm (cgoban)[description]: Fix typo.
* gnu/services/version-control.scm (gitolite-service-type)[description]:
Fix typo.
* gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full
stop at end of title.
* gnu/machine/ssh.scm (machine-ssh-configuration-system): Move
punctuation outside of quotes.
* guix/scripts/home.scm (process-action): Remove trailing space before
newline.
* guix/scripts/system.scm (show-help): Fix typo.
* guix/scripts/environment.scm (with-store/maybe): Fix typo.
| Julien Lepiller |
| 2022-10-13 | installer: partition: Add a confirmation page before formatting....Fixes: <https://issues.guix.gnu.org/57232>.
* gnu/installer/newt/partition.scm (run-label-confirmation-page): New
procedure.
(run-label-page): Call the above procedure before proceeding.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Mathieu Othacehe |
| 2022-09-22 | installer: Exit console-services page with abort-to-prompt....* gnu/installer/newt/services.scm (run-console-services-cbt-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Return partitions with crypt password as step result....* gnu/installer/newt/partition.scm (run-partitioning-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Move <secret> to utils and use it for crypt passwords....* gnu/installer/user.scm (<secret>, secret?, make-secret, secret-content): Move
to utils.scm.
* gnu/installer/utils.scm (<secret>, secret?, make-secret, secret-content):
Moved from user.scm.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Make password a
<secret>.
* gnu/installer/parted.scm (luks-format-and-open): Unwrap secret.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-04-06 | installer: user: Forbid root user creation....Forbid root user creation as it could lead to a system without any
non-priviledged user accouts.
Fixes: <https://issues.guix.gnu.org/54666>.
* gnu/installer/newt/user.scm (run-user-add-page): Forbid it.
| Mathieu Othacehe |
| 2022-02-02 | installer: Make dump archive creation optional and selective....* gnu/installer.scm (installer-program): Let the installer customize
the dump archive.
* gnu/installer/dump.scm (prepare-dump, make-dump): Split make-dump in
prepare-dump, which copies the files necessary for the dump, and
make-dump which creates the archive.
* gnu/installer/record.scm (installer): Add report-page field. Change
documented return value of exit-error.
* gnu/installer/newt.scm (exit-error): Change arguments to be a string
containing the error. Let the user choose between exiting and
initiating a dump.
(report-page): Add new variable.
* gnu/installer/newt/page.scm (run-dump-page): New variable.
* gnu/installer/newt/dump.scm: Delete it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Turn passwords into opaque records....* gnu/installer/user.scm (<secret>, secret?, make-secret,
secret-content): Add opaque <secret> record that boxes its contents,
with a custom printer that doesn't display anything.
* gnu/installer/newt/user.scm (run-user-add-page, run-user-page): Box
it.
* gnu/installer/final.scm (create-user-database): Unbox it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Add error page when running external commands....* gnu/installer/newt.scm (newt-run-command): Add it.
* gnu/installer/newt/page.scm (%ok-button, %exit-button,
%default-buttons, make-newt-buttons, run-textbox-page): Add them.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use named prompt to abort or break installer steps....* gnu/installer/steps.scm (run-installer-steps): Set up
'installer-step prompt.
* gnu/installer/newt/ethernet.scm (run-ethernet-page)
* gnu/installer/newt/final.scm (run-config-display-page,
run-install-failed-page)
* gnu/installer/newt/keymap.scm (run-layout-page, run-variant-page)
* gnu/installer/newt/locale.scm (run-language-page,
run-territory-page, run-codeset-page, run-modifier-page,
run-locale-page)
* gnu/installer/newt/network.scm (run-technology-page,
wait-service-online)
* gnu/installer/newt/page.scm (run-listbox-selection-page,
run-checkbox-tree-page)
* gnu/installer/newt/partition.scm (button-exit-action)
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page,
run-networking-cbt-page, run-other-services-cbt-page,
run-network-management-page)
* gnu/installer/newt/timezone.scm (run-timezone-page)
* gnu/installer/newt/user.scm (run-user-page)
* gnu/installer/newt/welcome.scm (run-menu-page)
* gnu/installer/newt/wifi.scm (run-wifi-page): Use the 'installer-step
prompt to abort.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Replace run-command by invoke in newt/page.scm....* gnu/installer/newt/page.scm (edit-file): Replace it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Fix run-file-textbox-page when edit-button is #f....* gnu/installer/newt/page.scm (run-file-textbox-page): Check if
edit-button is #f.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use new installer-log-line everywhere....* gnu/installer.scm (installer-program)
* gnu/installer/final.scm (install-locale)
* gnu/installer/newt.scm (init)
* gnu/installer/newt/final.scm (run-final-page)
* gnu/installer/newt/page.scm (run-form-with-clients)
* gnu/installer/newt/partition.scm (run-partitioning-page)
* gnu/installer/parted.scm (eligible-devices, mkpart,
luks-format-and-open, luks-close, mount-user-partitions,
umount-user-partitions, free-parted):
* gnu/installer/steps.scm (run-installer-steps):
* gnu/installer/utils.scm (run-command, send-to-clients): Use it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Add crash dump upload support....Suggested-by: Josselin Poiret <dev@jpoiret.xyz>
* gnu/installer/dump.scm: New file.
* gnu/installer/newt/dump.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* gnu/installer/record.scm (<installer>)[dump-page]: New field.
* gnu/installer/steps.scm (%current-result): New variable.
(run-installer-steps): Update it.
* gnu/installer.scm (installer-program): Add tar and gip to the installer
path. Add guile-webutils and gnutls to the Guile extensions. Generate and send
the crash dump report.
* gnu/installer/newt.scm (exit-error): Add a report argument. Display the
report id.
(dump-page): New procedure.
(newt-installer): Update it.
| Mathieu Othacehe |
| 2022-01-14 | installer: Check if ci.guix.gnu.org can be reached....* gnu/installer.scm (installer-program): Add gnutls extension.
* gnu/installer/newt/network.scm (wait-service-online): Check if the CI server
can be reached.
| Mathieu Othacehe |
| 2022-01-14 | installer: Ignore small devices....Filter the devices that are smaller than 2GiB in the device selection list.
* gnu/installer/parted.scm (%min-device-size): New variable.
(non-install-devices): Rename it ...
(eligible-devices): ... this way. Filter the install device as well as the
small devices.
* gnu/installer/newt/partition.scm (run-partitioning-page): Adapt it.
| Mathieu Othacehe |
| 2021-12-28 | installer: Recommend 'ntp-service-type' for non-graphical systems....We had several bug reports with a root cause of "the clock was
incorrect" from users who used the installer to install a non-graphical
Guix System.
* gnu/installer/services.scm (%system-services): Add the ntp-service-type.
* gnu/installer/newt/services.scm (run-system-administration-cbt-page): New
variable.
(run-services-page): Use run-system-administration-cbt-page when not
installing a desktop.
* gnu/installer/tests.scm (choose-services): Add and use a
choose-misc-service? procedure.
* gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add
ntp-service-type.
| Leo Famulari |
| 2021-12-28 | installer: Offer the CUPS printing service on a dedicated page....Currently, the installer page RUN-OTHER-SERVICES-CBT-PAGE offers to the user all
installer services that are not of the types 'desktop', 'network-management', or
'networking'. Concretely, this means that it offers the CUPS printing service,
because that is the only service of a different type defined in the installer.
In later commits, we will add some services of a new type, and we only want them
to be offered when the user is installing a non-graphical system.
At least one of these new services (NTP) is part of %DESKTOP-SERVICES. If it
was also offered on RUN-OTHER-SERVICES-CBT-PAGE, and the user had configured a
system using %DESKTOP-SERVICES, the user could accidentally add NTP to their
services twice, which is an error and would break installation.
So, this commit makes the RUN-OTHER-SERVICES-CBT-PAGE be more specific about
what services to offer. This makes it easier to discriminate between desktop and
non-desktop installations, in terms of when a given service is offered.
* gnu/installer/newt/services.scm (RUN-OTHER-SERVICES-CBT-PAGE): Rename to ...
(RUN-PRINTING-SERVICES-CBT-PAGE): ... new variable, and select only 'document' services.
(RUN-SERVICES-PAGE): Adjust accordingly.
* gnu/installer/tests.scm (CHOOSE-SERVICES): Adjust accordingly.
| Leo Famulari |
| 2021-10-21 | installer: Reorder file system type listbox....Recommending ext4 over btrfs is probably ill-advised nowadays. See the
regular bug reports about running out of /gnu/store directory entries,
for which the documented fix then breaks booting with GRUB.
Instead, just list regular file systems alphabetically. We can bikeshed
bcachefs later ;-)
Move second-class file systems like NTFS to their own section at the end
of the list.
* gnu/packages/package-management.scm (run-fs-type-page): Reorder the
LISTBOX-ITEMS.
| Tobias Geerinckx-Rice |
| 2021-09-23 | installer: Support XFS....* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘xfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘xfs’ mapping.
(create-xfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add xfsprogs.
| Tobias Geerinckx-Rice |
| 2021-06-30 | installer: Offer the CUPS printing service....* gnu/installer/services.scm (%system-services): Add CUPS.
* gnu/installer/newt/services.scm (run-other-services-cbt-page):
New procedure.
(run-services-page): Call it last.
| Tobias Geerinckx-Rice |
| 2021-06-29 | installer: Fix crash when deleting a free space partition....Fixes: <https://issues.guix.gnu.org/49126>.
* gnu/installer/newt/partition.scm (run-disk-page): Fix the return value when
removing a free space partition.
| Mathieu Othacehe |
| 2021-06-12 | installer: Check partitions UUIDs....* gnu/installer/parted.scm (&cannot-read-uuid): New condition.
(cannot-read-uuid?, cannot-read-uuid-partition): New procedures.
(check-user-partitions): Check that all user-partitions have a valid UUID,
raide the above condition otherwise.
* gnu/installer/newt/partition.scm (run-disk-page): Run an error page if the
&cannot-read-uuid condition is raised.
| Mathieu Othacehe |
| 2021-06-12 | installer: Print user partitions....* gnu/installer/newt/partition.scm (run-partitioning-page): Print
user-partitions to syslog.
| Mathieu Othacehe |
| 2021-04-28 | installer: Force GPT disk label when UEFI is supported....* gnu/installer/newt/partition.scm (run-label-page): Force the GPT disk label
when UEFI is supported.
| Mathieu Othacehe |
| 2021-01-31 | installer: Edit desktop selection prompt....* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page):
Fix and clarify the #:info-text.
| Tobias Geerinckx-Rice |
| 2021-01-12 | installer: Fix crash in parameters menu....Fixes: <https://issues.guix.gnu.org/45378>.
* gnu/installer/newt/keymap.scm (run-layout-page): Return false when
"Continue" button is pressed.
(run-keymap-page): Do not try to compute variants if layout is false. Also do
not try to format the result if layout is false.
* gnu/installer.scm (compute-keymap-step): Do not apply keymap if
"run-keymap-page" returns false.
| Mathieu Othacehe |
| 2020-12-11 | install: Discover local substitute servers....* gnu/installer/substitutes.scm: New file.
* gnu/installer/newt/substitutes.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* po/guix/POTFILES.in: Add gnu/installer/newt/substitutes.scm.
* gnu/installer/proxy.scm (with-silent-shepherd): Move to ...
* gnu/installer/utils.scm: ... here.
* gnu/installer/record.scm (<installer>)[substitutes-page]: New field.
* gnu/installer/newt.scm (substitutes-page): New procedure,
(newt-installer): register it.
* gnu/installer.scm (installer-steps): Add "substitutes-page" step.
* gnu/system/install.scm (%installation-services): Add avahi-service-type and
enable substitute server discover in guix-service-type.
[<name-service-switch>]: Set it to %mdns-host-lookup-nss.
| Mathieu Othacehe |
| 2020-11-07 | installer: parameters: Add a reboot button....Suggested by: zimoun <zimon.toutoune@gmail.com>.
* gnu/installer/newt/parameters.scm (run-parameters-page): Add a reboot
button.
| Mathieu Othacehe |
| 2020-11-07 | installer: Edit partitioning warning message....* gnu/installer/newt/partition.scm (draw-formatting-page): Add an extra new
line.
| Mathieu Othacehe |
| 2020-11-07 | installer: Limit listbox height....Fixes: <https://issues.guix.gnu.org/44428>.
* gnu/installer/newt.scm (init): Print screen size.
* gnu/installer/newt/page.scm (default-listbox-height): New variable.
(run-listbox-selection-page): Use it.
* gnu/installer/newt/wifi.scm (wifi-listbox-height): Ditto.
* gnu/installer/newt/network.scm (run-technology-page): Set the maximum
listbox height to 5.
* gnu/installer/newt/ethernet.scm (run-ethernet-page): Ditto.
* gnu/installer/newt/final.scm (run-config-display-page): Change listbox
height.
* gnu/installer/newt/partition.scm (run-disk-page): Ditto.
* gnu/installer/newt/welcome.scm (display-logo?): New procedure.
(run-menu-page): Use it.
* gnu/installer/steps.scm (%configuration-file-width): Remove it.
| Mathieu Othacehe |
| 2020-11-02 | installer: Report to the user the formatted partitions....* gnu/installer/newt/partitions.scm (define-module): Use (ice-9 format).
(draw-formatting-page): Add parameter partitions and provide the list of
formatted partitions to the user.
(run-partitioning-page): Provide user-partitions to draw-formatting-page.
| Miguel Ángel Arruga Vivas |
| 2020-10-30 | installer: Use UUIDs in the 'swap-devices' field....Note: This change requires an updated 'guix' package that contains
Linux-swap support in (gnu build file-systems).
* gnu/installer/parted.scm (user-partitions->configuration): Use UUIDs
in the 'swap-devices' field.
* gnu/installer/newt/final.scm (run-final-page)[wait-for-clients]: New
procedure. Use it.
* gnu/installer/tests.scm (choose-partitioning): Wait for
'starting-final-step' message and move configuration file dialog
handling to...
(conclude-installation): ... here. Send over PORT the reply
corresponding to 'starting-final-step'.
* gnu/tests/install.scm (gui-test-program): When ENCRYPTED? is false,
invoke 'swaplabel' in the marionette.
(installation-target-os-for-gui-tests): When ENCRYPTED? is false, except
a fixed UUID.
| Ludovic Courtès |
| 2020-10-28 | installer: Log partition formatting....* gnu/installer/newt/partition.scm (run-partitioning-page): Add 'syslog' call.
| Ludovic Courtès |
| 2020-10-23 | installer: Make the network management selection window tighter....* gnu/installer/newt/services.scm (run-network-management-page): Pass
#:listbox-height.
| Ludovic Courtès |
| 2020-10-13 | installer: Add Emacs EXWM desktop environment....Suggested by zenny via IRC.
* gnu/installer/services.scm (%system-services): Add emacs, emacs-exwm,
emacs-desktop-environment.
* etc/release-manifest.scm (%system-packages): Likewise.
* gnu/system/examples/lightweight-desktop.tmpl: Likewise.
* gnu/tests/install.scm (installation-target-desktop-os-for-gui-tests)
[packages]: Likewise
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page): Make
one entry taller.
| Jan (janneke) Nieuwenhuizen |
| 2020-09-21 | installer: Rename RUN-PARTIONING-PAGE....* gnu/installer/newt/partition.scm (run-partioning-page): Rename to
run-partitioning-page. Adjust all callers.
| Tobias Geerinckx-Rice |
| 2020-09-21 | installer: Fix docstring typoes....* gnu/installer/connman.scm (connman-state, run-locale-page)
(start-swapping, stop-swapping, run-installer-steps): Fix typo in
docstring.
| Tobias Geerinckx-Rice |
| 2020-09-02 | installer: Run the installation inside a container....When the store overlay is mounted, other processes such as kmscon, udev
and guix-daemon may open files from the store, preventing the
underlying install support from being umounted. See:
https://lists.gnu.org/archive/html/guix-devel/2018-12/msg00161.html.
To avoid this situation, mount the store overlay inside a container,
and run the installation from within that container.
* gnu/build/shepherd.scm (fork+exec-command/container): New procedure.
* gnu/services/base.scm (guix-shepherd-service): Support an optional PID
argument passed to the "start" method. If that argument is passed, ensure that
guix-daemon enters the given PID MNT namespace by using
fork+exec-command/container procedure.
* gnu/installer/final.scm (umount-cow-store): Remove it,
(install-system): run the installation from within a container.
* gnu/installer/newt/final.scm (run-install-shell): Remove the display hack.
| Mathieu Othacehe |
| 2020-07-26 | installer: Add NTFS support....This adds support for creating and editing NTFS partitions. It is however not
possible yet to create root NTFS partitions, as overlaying on top of a fuse
partition does not seem supported.
* gnu/installer.scm (installer-program): Add "ntfs-3g" to the inputs.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type,
partition-filesystem-user-type, create-ntfs-file-system,
format-user-partitions): Add NTFS support.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add NTFS support.
| Mathieu Othacehe |
