| Age | Commit message (Expand) | Author |
|---|
| 2022-11-15 | installer: Report known-unsupported PCI devices....* gnu/installer/hardware.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer.scm (installer-steps): Pass #:pci-database to the
'welcome' step procedure.
* gnu/installer/newt.scm (welcome-page): Add #:pci-database and pass it
to 'run-welcome-page'.
* gnu/installer/newt/welcome.scm (check-hardware-support): Add #:pci-database.
Enumerate unsupported PCI devices and run an error page when unsupported
devices are found.
(run-welcome-page): Add #:pci-database and pass it to
'check-hardware-support' and to the recursive call.
* gnu/installer/record.scm (<installer>)[welcome-page]: Adjust comment.
* doc/guix.texi (Hardware Considerations): Mention it.
| Ludovic Courtès |
| 2022-11-15 | installer: Warn about hardware support after the welcome page....This is a followup to 682639c107908426fe6bf0a1b8404b98b7820290, which
added the uvesafb upfront, before welcome page had been displayed.
* gnu/installer/newt/welcome.scm (check-hardware-support): New
procedure.
(run-welcome-page): Use it.
| Ludovic Courtès |
| 2022-11-02 | installer: Skip the backtrace page on user abort....When the user aborts the installation because a core dump is discovered or the
installation command failed, displaying the abort backtrace doesn't make much
sense. Hide it when the abort condition is &user-abort-error and skip directly
to the dump page.
* gnu/installer/steps.scm (&user-abort-error): New variable.
(user-abort-error?): New procedure.
* gnu/installer/newt/final.scm (run-install-failed-page): Raise a
user-abort-error.
* gnu/installer/newt/welcome.scm (run-welcome-page): Ditto.
* gnu/installer.scm (installer-program): Hide the backtrace page and directly
propose to dump the report when the a &user-abort-error is raised.
| Mathieu Othacehe |
| 2022-11-02 | installer: Add core dump support....Fixes: <https://issues.guix.gnu.org/58733>
* gnu/installer.scm (installer-program): Enable core dump generation.
* gnu/installer/dump.scm (%core-dump): New variable.
(prepare-dump): Copy the core dump file.
* gnu/installer/newt/welcome.scm (run-welcome-page): Propose to report an
installation that previously generated a core dump.
| Mathieu Othacehe |
| 2022-10-25 | installer: welcome: Warn when uvesafb gets used....There will be false positives: Because the Guix installer uses the
kernel argument modprobe.blacklist=radeon,amdgpu and some AMD graphics
actually work okay according to h-node, these users will get a
false alarm.
* gnu/installer/newt/welcome.scm (run-welcome-page): Warn before showing
the welcome page.
| pelzflorian (Florian Pelz) |
| 2022-02-02 | installer: Use named prompt to abort or break installer steps....* gnu/installer/steps.scm (run-installer-steps): Set up
'installer-step prompt.
* gnu/installer/newt/ethernet.scm (run-ethernet-page)
* gnu/installer/newt/final.scm (run-config-display-page,
run-install-failed-page)
* gnu/installer/newt/keymap.scm (run-layout-page, run-variant-page)
* gnu/installer/newt/locale.scm (run-language-page,
run-territory-page, run-codeset-page, run-modifier-page,
run-locale-page)
* gnu/installer/newt/network.scm (run-technology-page,
wait-service-online)
* gnu/installer/newt/page.scm (run-listbox-selection-page,
run-checkbox-tree-page)
* gnu/installer/newt/partition.scm (button-exit-action)
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page,
run-networking-cbt-page, run-other-services-cbt-page,
run-network-management-page)
* gnu/installer/newt/timezone.scm (run-timezone-page)
* gnu/installer/newt/user.scm (run-user-page)
* gnu/installer/newt/welcome.scm (run-menu-page)
* gnu/installer/newt/wifi.scm (run-wifi-page): Use the 'installer-step
prompt to abort.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2020-11-07 | installer: Limit listbox height....Fixes: <https://issues.guix.gnu.org/44428>.
* gnu/installer/newt.scm (init): Print screen size.
* gnu/installer/newt/page.scm (default-listbox-height): New variable.
(run-listbox-selection-page): Use it.
* gnu/installer/newt/wifi.scm (wifi-listbox-height): Ditto.
* gnu/installer/newt/network.scm (run-technology-page): Set the maximum
listbox height to 5.
* gnu/installer/newt/ethernet.scm (run-ethernet-page): Ditto.
* gnu/installer/newt/final.scm (run-config-display-page): Change listbox
height.
* gnu/installer/newt/partition.scm (run-disk-page): Ditto.
* gnu/installer/newt/welcome.scm (display-logo?): New procedure.
(run-menu-page): Use it.
* gnu/installer/steps.scm (%configuration-file-width): Remove it.
| Mathieu Othacehe |
| 2020-03-05 | installer: Implement a dialog on /var/guix/installer-socket....This will allow us to automate testing of the installer.
* gnu/installer/utils.scm (%client-socket-file)
(current-server-socket, current-clients): New variables.
(open-server-socket, call-with-server-socket): New procedure.
(with-server-socket): New macro.
(run-shell-command): Add call to 'send-to-clients'. Select on both
current-input-port and current-clients.
* gnu/installer/steps.scm (run-installer-steps): Wrap 'call-with-prompt'
in 'with-socket-server'. Call 'sigaction' for SIGPIPE.
* gnu/installer/newt/page.scm (watch-clients!, close-port-and-reuse-fd)
(run-form-with-clients, send-to-clients): New procedures.
(draw-info-page): Add call to 'run-form-with-clients'.
(run-input-page): Likewise. Handle EXIT-REASON equal to 'exit-fd-ready.
(run-confirmation-page): Likewise.
(run-listbox-selection-page): Likewise. Define 'choice->item' and use it.
(run-checkbox-tree-page): Likewise.
(run-file-textbox-page): Add call to 'run-form-with-clients'. Handle
'exit-fd-ready'.
* gnu/installer/newt/partition.scm (run-disk-page): Pass
#:client-callback-procedure to 'run-listbox-selection-page'.
* gnu/installer/newt/user.scm (run-user-page): Call
'run-form-with-clients'. Handle 'exit-fd-ready'.
* gnu/installer/newt/welcome.scm (run-menu-page): Define
'choice->item' and use it. Call 'run-form-with-clients'.
* gnu/installer/newt/final.scm (run-install-success-page)
(run-install-failed-page): When (current-clients) is non-empty, call
'send-to-clients' without displaying a choice window.
| Ludovic Courtès |
| 2019-04-07 | installer: Adjust welcome page message....* gnu/installer/newt/welcome.scm (run-welcome-page): Make the message
less scary.
| Ludovic Courtès |
| 2019-03-13 | Remove traces of "GuixSD"....* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Remove
mentions of "GuixSD".
* gnu/bootloader/grub.scm (install-grub-efi): Likewise.
* gnu/build/vm.scm (make-iso9660-image): Change default #:volume-id to
"Guix_image".
(initialize-hard-disk): Search for the "Guix_image" label.
* gnu/ci.scm (system-test-jobs, tarball-jobs): Remove "GuixSD".
* gnu/installer/newt/welcome.scm (run-welcome-page): Likewise.
* gnu/packages/audio.scm (supercollider)[description]: Likewise.
* gnu/packages/curl.scm (curl): Likewise.
* gnu/packages/emacs.scm (emacs): Likewise.
* gnu/packages/gnome.scm (network-manager): Likewise.
* gnu/packages/julia.scm (julia): Likewise.
* gnu/packages/linux.scm (alsa-plugins): Likewise.
(powertop, wireless-regdb): Likewise.
* gnu/packages/package-management.scm (guix): Likewise.
* gnu/packages/polkit.scm (polkit): Likewise.
* gnu/packages/tex.scm (texlive-bin): Likewise.
* gnu/services/base.scm (file-systems->fstab): Likewise.
* gnu/services/cups.scm (%cups-activation): Likewise.
* gnu/services/mail.scm (%dovecot-activation): Likewise.
* gnu/services/messaging.scm (prosody-configuration)[log]: Likewise.
* gnu/system/examples/vm-image.tmpl (vm-image-motd): Likewise.
* gnu/system/install.scm (installation-os)[file-systems]: Change root
file system label to "Guix_image".
* gnu/system/mapped-devices.scm (check-device-initrd-modules):
Remove "GuixSD".
* gnu/system/vm.scm (system-docker-image): Likewise.
(system-disk-image)[root-label]: Change to "Guix_image".
* gnu/tests/install.scm (run-install): Remove "GuixSD".
* guix/modules.scm (guix-module-name?): Likewise.
* nix/libstore/optimise-store.cc: Likewise.
| Ludovic Courtès |
| 2019-01-17 | installer: welcome: Put "Graphical installer" ahead....* gnu/installer/newt/welcome.scm (run-welcome-page): Propose "Graphical
install" before shell based install.
| Mathieu Othacehe |
| 2019-01-17 | installer: Redirect to TTY3 root shell for unguided install....* gnu/installer/newt/welcome.scm (run-welcome-page): Switch to TTY3 for
unguided shell based install.
| Mathieu Othacehe |
| 2019-01-17 | installer: Rewrite welcome page....The welcome page is the only page using absolute positioning for the newt
components, so that the page occupies all the screen space. This is becoming
too hard to manage, so switch to grid management like elsewhere, even if the
result is less appealing.
Also add an info text to the page with a mention on how to switch back to the
original installer.
* gnu/installer/newt/welcome.scm (run-menu-page): Use a vertically stacked
grid instead of hard window placement.
| Mathieu Othacehe |
| 2019-01-17 | gnu: Add graphical installer support....* configure.ac: Require that guile-newt is available.
* gnu/installer.scm: New file.
* gnu/installer/aux-files/logo.txt: New file.
* gnu/installer/build-installer.scm: New file.
* gnu/installer/connman.scm: New file.
* gnu/installer/keymap.scm: New file.
* gnu/installer/locale.scm: New file.
* gnu/installer/newt.scm: New file.
* gnu/installer/newt/ethernet.scm: New file.
* gnu/installer/newt/hostname.scm: New file.
* gnu/installer/newt/keymap.scm: New file.
* gnu/installer/newt/locale.scm: New file.
* gnu/installer/newt/menu.scm: New file.
* gnu/installer/newt/network.scm: New file.
* gnu/installer/newt/page.scm: New file.
* gnu/installer/newt/timezone.scm: New file.
* gnu/installer/newt/user.scm: New file.
* gnu/installer/newt/utils.scm: New file.
* gnu/installer/newt/welcome.scm: New file.
* gnu/installer/newt/wifi.scm: New file.
* gnu/installer/steps.scm: New file.
* gnu/installer/timezone.scm: New file.
* gnu/installer/utils.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add previous files.
* gnu/system.scm: Export %root-account.
* gnu/system/install.scm (%installation-services): Use kmscon instead of linux
VT for all tty.
(installation-os)[users]: Add the graphical installer as shell of the root
account.
[packages]: Add font related packages.
* po/guix/POTFILES.in: Add installer files.
| Mathieu Othacehe |
