aboutsummaryrefslogtreecommitdiff
path: root/gnu/installer.scm
AgeCommit message (Expand)Author
2019-01-17installer: Various renamings....1. s/partitionment/partitioning/ 2. s/crypted/encrypted/ * gnu/installer.scm (installer-steps): Apply renamings. * gnu/installer/newt/partition.scm (run-disk-page): ditto, * gnu/installer/parted.scm (auto-partition): ditto, (luks-format-and-open): ditto, (luks-close): ditto, (user-partitions->configuration): ditto. Mathieu Othacehe
2019-01-17installer: partionment: Add encryption support....* gnu/installer.scm (set-installer-path): Add cryptsetup. * gnu/installer/newt/partition.scm (prompt-luks-passwords): New procedure, (run-partioning-page): Add the possibility to set encryption to "On" on a partition and choose a label, add a new partition scheme: "Guided - using the entire disk with encryption", prompt for encryption passwords before proceeding to formating. * gnu/installer/parted.scm (<user-partition>)[crypt-label], [crypt-password]: New fields, (partition-description): add the encryption label, (user-partition-description): add an encryption field, (auto-partition): add two partitioning schemes: entire-crypted-root and entire-crypted-root-home, (call-with-luks-key-file): new procedure, (user-partition-upper-path): new procedure, (luks-format-and-open): new procedure, (luks-close): new procedure, (format-user-partitions): format and open luks partitions before creating file-system. (mount-user-partitions): use the path returned by user-partition-upper-path, (umount-user-partitions): close the luks partitions, (user-partition->file-system): set device field to label for luks partitions and to uuid for the rest, (user-partition->mapped-device): new procedure, (user-partitions->configuration): add mapped-devices field. Mathieu Othacehe
2019-01-17installer: Display an eventual backtrace in a page....* gnu/installer.scm (installer-program): Write the backtrace in "/tmp/last-installer-error" and pass the filename to installer-exit-error. * gnu/installer/newt.scm (exit-error): Display the file passed above in a textbox. Mathieu Othacehe
2019-01-17installer: Reorder partitionment step....* gnu/installer.scm (installer-steps): Run partitionment step after keymap step, so that the keyboard is correctly mapped when filling the mount-point entry in partitionment page. Mathieu Othacehe
2019-01-17installer: Add partitioning support....* gnu/installer.scm (installer-steps): Add partitioning step. * gnu/installer/newt.scm (newt-installer): Add partition-page field. * gnu/installer/newt/partition.scm: New file. * gnu/installer/parted.scm: New file. * gnu/installer/record (installer): New partition-page field. * gnu/local.mk (GNU_SYSTEM_MODULES): Add new files. * po/guix/POTFILES.in: Add new files. Mathieu Othacehe
2019-01-17installer: Fix comments....* gnu/installer.scm (installer-steps): Fix comments. Mathieu Othacehe
2019-01-17installer: Add hostname....* gnu/installer/hostname.scm: New file. * gnu/installer.scm (installer-program): Use new module above. * gnu/local.mk (GNU_SYSTEM_MODULES): Add new file. * po/guix/POTFILES.in: Add new file. Mathieu Othacehe
2019-01-17installer: Add services page....Add a page to select services, for now only desktop environments choice is available. * gnu/installer.scm (steps): Add services step. * gnu/installer/newt.scm (newt-installer): Add services-page field. * gnu/installer/newt/services.scm: New file. * gnu/installer/record.scm (installer): Add services-page field. * gnu/installer/services.scm: New file. * gnu/local.mk (GNU_SYSTEM_MODULES): Add new files. * po/guix/POTFILES.in: Add new files. Mathieu Othacehe
2019-01-17installer: Do not ask for keyboard model....Suppose that the keyboard model is "pc105". * gnu/installer.scm (apply-keymap): Remove model ... * gnu/installer/newt/keymap.scm (run-keymap-page): passed here. (run-model-page): remove procedure * gnu/installer/record.scm (installer): Edit keymap-page prototype in comment. * gnu/installer/keymap.scm (default-keyboard-model): New exported parameter. Mathieu Othacehe
2019-01-17installer: Add configuration formatter....* gnu/installer.scm (installer-steps): Add configuration-formatter procedures. * gnu/installer/final.scm: New file. * gnu/installer/locale.scm (locale->configuration): New exported procedure. * gnu/installer/newt.scm (newt-installer): Add final page. * gnu/installer/newt/final.scm: New file. * gnu/installer/record.scm (installer): Add final-page field. * gnu/installer/timezone.scm (posix-tz->configuration): New exported procedure. * gnu/installer/steps.scm (installer-step): Rename configuration-proc field to configuration-formatter. (%installer-configuration-file): New exported parameter, (%installer-target-dir): ditto, (%configuration-file-width): ditto, (format-configuration): new exported procedure, (configuration->file): new exported procedure. Mathieu Othacehe
2019-01-17installer: Fix locale installation....For some mysterious reason, calling 'setlocale' as first instruction of installer-builder does not install unicode support correctly. So set LANG env variable and start the installer until this is understood. * gnu/installer.scm (installer-program): Wrap installer-builder to have the opportunity to set LANG environment variable before starting the installer. Mathieu Othacehe
2019-01-17installer: Move everything to the build side....* gnu/installer.scm: Rename to ... * gnu/installer/record.scm: ... this. * gnu/installer/build-installer.scm: Move everything to the build side and rename to gnu/installer.scm. * gnu/installer/newt.scm: Remove all the gexps and add depencies to newt modules as this code will only be used on the build side by now. * gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it, (dist_installer_DATA): New rule to install installer's aux-files. * gnu/system/install.scm (%installation-services): Use only 'installer-program' from (gnu installer). The installer is now choosen on the build side. * guix/self.scm (*system-modules*): Restore previous behaviour and add all installer files to #:extra-files field of the scheme-node. * po/guix/POTFILES.in: Adapt it. Mathieu Othacehe
2019-01-17gnu: Add graphical installer support....* configure.ac: Require that guile-newt is available. * gnu/installer.scm: New file. * gnu/installer/aux-files/logo.txt: New file. * gnu/installer/build-installer.scm: New file. * gnu/installer/connman.scm: New file. * gnu/installer/keymap.scm: New file. * gnu/installer/locale.scm: New file. * gnu/installer/newt.scm: New file. * gnu/installer/newt/ethernet.scm: New file. * gnu/installer/newt/hostname.scm: New file. * gnu/installer/newt/keymap.scm: New file. * gnu/installer/newt/locale.scm: New file. * gnu/installer/newt/menu.scm: New file. * gnu/installer/newt/network.scm: New file. * gnu/installer/newt/page.scm: New file. * gnu/installer/newt/timezone.scm: New file. * gnu/installer/newt/user.scm: New file. * gnu/installer/newt/utils.scm: New file. * gnu/installer/newt/welcome.scm: New file. * gnu/installer/newt/wifi.scm: New file. * gnu/installer/steps.scm: New file. * gnu/installer/timezone.scm: New file. * gnu/installer/utils.scm: New file. * gnu/local.mk (GNU_SYSTEM_MODULES): Add previous files. * gnu/system.scm: Export %root-account. * gnu/system/install.scm (%installation-services): Use kmscon instead of linux VT for all tty. (installation-os)[users]: Add the graphical installer as shell of the root account. [packages]: Add font related packages. * po/guix/POTFILES.in: Add installer files. Mathieu Othacehe