| Age | Commit message (Expand) | Author |
|---|
| 2022-01-13 | bootloader: grub: Fix serial mode....* gnu/bootloader/grub.scm (grub-setup-io): Fix serial mode display by
declaring the serial property before the terminal_input and terminal_output
properties.
| Mathieu Othacehe |
| 2021-12-01 | gnu: system: Add LUKS2 support for the root file system....* gnu/bootloader/grub.scm (grub-configuration-file): Add 'insmod
luks2'.
* gnu/system/mapped-devices.scm (open-luks-device): Create
'/run/cryptsetup/' directory.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Josselin Poiret |
| 2021-08-29 | Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new
'targets' one instead.
* doc/guix-cookbook.texi<target>: Replace by 'targets'.
* gnu/bootloader/grub.scm: Likewise.
* gnu/installer/parted.scm: Likewise.
* gnu/machine/digital-ocean.scm: Likewise.
* gnu/system/examples/asus-c201.tmpl: Likewise
* gnu/system/examples/bare-bones.tmpl: Likewise
* gnu/system/examples/bare-hurd.tmpl: Likewise
* gnu/system/examples/beaglebone-black.tmpl: Likewise
* gnu/system/examples/desktop.tmpl: Likewise
* gnu/system/examples/docker-image.tmpl: Likewise
* gnu/system/examples/lightweight-desktop.tmpl: Likewise
* gnu/system/examples/vm-image.tmpl: Likewise
* gnu/system/examples/yggdrasil.tmpl: Likewise
* gnu/system/hurd.scm: Likewise
* gnu/system/images/hurd.scm: Likewise
* gnu/system/images/novena.scm: Likewise
* gnu/system/images/pine64.scm: Likewise
* gnu/system/images/pinebook-pro.scm: Likewise
* gnu/system/images/rock64.scm: Likewise
* gnu/system/install.scm: Likewise
* gnu/system/vm.scm: Likewise
* gnu/tests.scm: Likewise
* gnu/tests/ganeti.scm: Likewise
* gnu/tests/install.scm: Likewise
* gnu/tests/nfs.scm: Likewise
* gnu/tests/telephony.scm: Likewise
* tests/boot-parameters.scm: Likewise
* tests/system.scm: Likewise
| Maxim Cournoyer |
| 2021-05-29 | gnu: bootloader: Fix install-allwinner64-u-boot....This fixes boot breakage introduced in commit:
a65c935e29766940148d52b8116634b1e1cbcba6
Multiple files were still needed, but the filenames changed.
* gnu/bootloader/u-boot.scm (install-allwinner64-u-boot): Update to
use both SPL and u-boot files with new filenames.
| Vagrant Cascadian |
| 2021-04-10 | bootloader: grub: Fix typo in docstring....* gnu/bootloader/grub.scm (install-grub-efi-netboot): Fix typo.
| Tobias Geerinckx-Rice |
| 2021-02-08 | gnu: bootloader: Update install-allwinner64-u-boot....* gnu/bootloader/u-boot.scm (install-allwinner64-u-boot): Update to
use a single file to install.
| Vagrant Cascadian |
| 2021-02-08 | gnu: u-boot-puma-rk3399: Switch to using arm-trusted-firmware-rk3399....* gnu/packages/bootloaders.scm (u-boot-puma-rk3399)[native-inputs]:
Add arm-trusted-firmware-rk3399.
Remove arm-trusted-firmware-puma-rk3399 and rk3399-cortex-m0.
* gnu/packages/firmware.scm (arm-trusted-firmware-puma-rk3399,
rk3399-cortex-m0): Remove obsolete variables.
* gnu/bootloader/u-boot.scm (install-puma-rk3399-u-boot): Install
idbloader.img.
| Vagrant Cascadian |
| 2021-01-17 | gnu: grub: Use installed unicode font....* gnu/bootloader/grub.scm (setup-gfxterm): Remove parameter font-file.
Refer to the installed font in /boot, not in the store.
(font-file): Delete obsolete function.
(install-grub): When populating a disk-image, install the unicode font, too.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
| Stefan |
| 2020-12-21 | system: Allow separated /boot and encrypted root....* gnu/bootloader/grub.scm (grub-configuration-file): New parameter
store-crypto-devices.
[crypto-devices]: New helper function.
[builder]: Use crypto-devices.
* gnu/machine/ssh.scm (roll-back-managed-host): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%encrypted-root-not-boot-os): New os declaration.
(%encrypted-root-not-boot-installation-script): New script, whose contents
were initially taken from %encrypted-root-installation-script.
(%test-encrypted-root-not-boot-os): New test.
* gnu/system.scm (define-module): Export
operating-system-bootoader-crypto-devices and
boot-parameters-store-crypto-devices.
(<boot-parameters>): Add field store-crypto-devices.
(read-boot-parameters): Parse store-crypto-devices field.
[uuid-sexp->uuid]: New helper function extracted from
device-sexp->device.
(operating-system-bootloader-crypto-devices): New function.
(operating-system-bootcfg): Use
operating-system-bootloader-crypto-devices to provide its contents to
the bootloader configuration generation process.
(operating-system-boot-parameters): Add store-crypto-devices to the
generated boot-parameters.
(operating-system-boot-parameters-file): Likewise to the file with
the serialized structure.
* guix/scripts/system.scm (reinstall-bootloader): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* tests/boot-parameters.scm (%default-store-crypto-devices): New
variable.
(%grub-boot-parameters, test-read-boot-parameters): Use
%default-store-crypto-devices.
(tests store-crypto-devices): New tests.
| Miguel Ángel Arruga Vivas |
| 2020-12-15 | Revert "gnu: grub: Fix unicode font loading when booting over TFTP."...This reverts commit 03fb57ff77b57de510b59485845ed7cb4e0a77a7, which
breaks most system tests. Specifically, grub.cfg.drv fails to build:
ERROR: In procedure canonicalize-path:
In procedure canonicalize-path: No such file or directory
| Ludovic Courtès |
| 2020-12-14 | gnu: grub: Fix unicode font loading when booting over TFTP....* gnu/bootloader/grub.scm (eye-candy)(font-file): Fix unicode font loading
when booting over TFTP.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
| Stefan |
| 2020-11-17 | bootloader: grub: Skip install-grub-efi when producing a disk image....Fixes <http://issues.guix.gnu.org/44353>.
Every bootloader should try their best to install themselves using only the
MOUNT-POINT and otherwise do nothing. This requirement comes from the
necessity to call INSTALL-GRUB when installing the (non-EFI) GRUB bootloader,
which needs to populate the root file system with extra modules that cannot be
fit in the core.img file, limited in size to 491520 bytes (by the i386-pc
format required for legacy BIOS compatibility).
As introducing bootloader knowledge at the level of the image code is
undesirable, every bootloader should be adapted to support this fall-back for
their installation procedure (TODO).
* gnu/bootloader/grub.scm (install-grub-efi)[efi-dir]: Skip when the EFI-DIR
argument is set to #f.
| Maxim Cournoyer |
| 2020-11-01 | system: Generate grub locale directory for grub.cfg....* gnu/bootloader/grub.scm (grub-locale-directory): New function.
(grub-configuration-file)[locale-config]: Use grub-locale-directory and
avoid the extra search when eye-candy have performed it.
| Miguel Ángel Arruga Vivas |
| 2020-10-30 | system: Fix dependency for grub.cfg generation....* gnu/bootloader/grub.scm (eye-candy)[font-file]: Use the bootloader
package provided with the configuration.
| Miguel Ángel Arruga Vivas |
| 2020-10-30 | system: Fix grub keymap with store in btrfs subvolume....* gnu/bootloader/grub.scm (grub-configuration-file)
[keyboard-layout-config]: Use normalize-file.
| Miguel Ángel Arruga Vivas |
| 2020-10-18 | system: Use locale information in grub.cfg....* gnu/bootloader/grub.scm (define-module): Add new dependency.
(grub-configuration-file): Add locale keyword.
(grub-configuration-file)[locale-config]: New variable with generated
locale configuration when locale parameter has been provided.
[builder]: Add locale-config.
| Miguel Ángel Arruga Vivas |
| 2020-10-05 | bootloader: Fix u-boot installation....This is a follow-up of f19cf27c2b9ff92e2c0fd931ef7fde39c376adaa. The
bootloader installation must be done on the final disk-image, hence using
"disk-image-installer" instead of "installer" callback.
* gnu/bootloader/u-boot.scm: Turn all installer callbacks into
disk-image-installer callbacks.
* gnu/build/bootloader.scm (write-file-on-device): Open the output file with
'no-truncate and 'no-create options.
* gnu/system/image.scm (with-imported-modules*): Add (gnu build bootloader)
module.
| Mathieu Othacehe |
| 2020-09-27 | gnu: grub: Support for network boot via TFTP....* gnu/bootloader/grub.scm (grub-efi-netboot-bootloader): New variable.
(install-grub-efi-netboot): New procedure.
(grub-root-search): Update comment.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
| Stefan |
| 2020-09-14 | gnu: grub: Support loading files from TFTP if the root filesystem is NFS....* gnu/bootloader/grub.scm (grub-root-search): Set the root to "(tftp)" if
the searched-for file is stored on NFS.
| Stefan |
| 2020-09-07 | bootloader: Use "define" instead of "define*" for all records....* gnu/bootloader/grub.scm (grub-minimal-bootloader): Use "define".
(grub-efi-bootloader): Use "define".
(grub-mkrescue-bootloader): Use "define".
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
| Stefan |
| 2020-09-06 | bootloader: Add comment about grub configuration files....* gnu/bootloader/grub.scm: Add comment about grub configuration files.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
| Stefan |
| 2020-06-09 | bootloader: grub: Fix cross-compilation....This is a follow-up of 536c53d347291dcc75e1073af6e6c5c614e0fff4, that do not
use the native version of "font-file", breaking cross-compilation.
* gnu/bootloader/grub.scm (eye-candy): Use the native version of "font-file".
| Mathieu Othacehe |
| 2020-06-09 | gnu: grub: Support graphical gfxterm on all systems....* gnu/bootloaders/grub.scm (eye-candy): Use gfxterm depending only on
(bootloader-configuration (terminal-outputs …)), which defaults to '(gfxterm).
This makes the system argument obsolete.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Stefan |
| 2020-06-08 | bootloader: grub: Add support for multiboot....* gnu/bootloader/grub.scm (grub-configuration-file): Add support for
multiboot.
| Jan (janneke) Nieuwenhuizen |
| 2020-05-29 | bootloader: grub: Rename the btrfs-subvolume-file-name parameter....Following discussion in <https://issues.guix.gnu.org/37305>, it seems more
appropriate to give the parameter a more generic name that better describes
what it does.
* gnu/bootloader/grub.scm (normalize-file): Rename the
BTRFS-SUBVOLUME-FILE-NAME parameter to STORE-DIRECTORY-PREFIX, and always
assume this argument to be a string.
(eye-candy): Likewise. Default STORE-DIRECTORY-PREFIX to "".
(grub-configuration-file): Likewise.
* gnu/system.scm (operating-system-bootcfg): Adapt.
| Maxim Cournoyer |
| 2020-05-29 | bootloader: grub: Use inheritance to define grub-minimal-bootloader....* gnu/bootloader/grub.scm (grub-minimal-bootloader): Inherit from
grub-bootloader to avoid field redefinition.
| Mathieu Othacehe |
| 2020-05-29 | bootloader: grub: Do not run grub-install when creating a disk-image....* gnu/bootloader/grub.scm (install-grub): When creating a disk-image,
grub-install will fail because it lacks root permissions. In that case, do not
run grub-install and only copy Grub modules to the /boot directory.
| Mathieu Othacehe |
| 2020-05-29 | bootloader: Add 'disk-image-installer'....* gnu/bootloader.scm (<bootloader>)[disk-image-installer]: New field,
(bootloader-disk-image-installer): export it.
* gnu/bootloader/grub.scm (install-grub-disk-image): New procedure ...
(grub-bootloader): ... used as "disk-image-installer" here.
(grub-efi-bootloader): set "disk-image-installer" to #f.
* gnu/system/image.scm (root-partition?, find-root-partition): Move to
"Helpers" section.
(root-partition-index): New procedure.
(system-disk-image): Honor disk-image-installer, and
use it to install the bootloader directly on the disk-image, if supported.
| Mathieu Othacehe |
| 2020-05-20 | bootloader: grub: Allow booting from a Btrfs subvolume....* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure.
(normalize-file): Add procedure.
(grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When
defined, prepend its value to the kernel and initrd file names, using the
NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the
BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well.
(eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with
the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested
variables. Adjust doc.
* gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise.
* gnu/system/file-systems.scm (btrfs-subvolume?)
(btrfs-store-subvolume-file-name): New procedures.
* gnu/system.scm (operating-system-bootcfg): Specify the Btrfs
subvolume file name the store resides on to the
`operating-system-bootcfg' procedure, using the new
BTRFS-SUBVOLUME-FILE-NAME argument.
* doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of
subvolumes.
* gnu/tests/install.scm (%btrfs-root-on-subvolume-os)
(%btrfs-root-on-subvolume-os-source)
(%btrfs-root-on-subvolume-installation-script)
(%test-btrfs-root-on-subvolume-os): New variables.
| Maxim Cournoyer |
| 2020-05-19 | gnu: grub: Allow a PNG image and replace "aspect-ratio" with "resolution"....* gnu/bootloaders/grub.scm (<grub-image>): Remove this record and replace it
by ...
(<grub-theme>)[image]: ... this field with the default from %background-image,
(<grub-theme>)[resolution]: ... this field with the defaults from 'width' and
'height' of 'grub-background-image'.
(<grub-theme>)[images]: Remove this field.
(svg->png): Rename to ...
(image->png): ... and use 'copy-file' instead of 'svg->png', if the suffix of
the image file is not ".svg".
(grub-background-image): Remove the arguments 'width' and 'height'.
(grub-theme-image): Add function.
(grub-theme-resolution): Add function.
(grub-theme-gfxmode): Add function.
(grub-image): Remove function.
(grub-image?): Remove function.
(grub-image-aspect-ratio): Remove function.
(grub-image-file): Remove function.
(grub-theme-images): Remove function.
(%default-theme): Remove variable.
(%background-image): Remove variable.
Using image formats different to SVG was not possible.
For a <grub-image> to be chosen, the 'aspect-ratio' of it had to be 4/3, as the
resolution of any image was defaulting to 1024 x 768.
There was no code to determine the proper boot-resolution to make any use of a
list of images with different aspect-ratios.
It seems to be a better solution to only define a single image with any format,
and use a given resolution only for the conversion from a SVG file. This also
makes the use of a special <grub-image> record unnecessary.
Moving the default values from '%background-image' and '%default-theme' into
<grub-theme> makes a customisation easier without (inherit) and allows to remove
the undocumented variables %background-image' and '%default-theme'.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Stefan |
| 2020-05-16 | bootloader: grub: Refer to the native 'grub-mklayout' and font file....* gnu/bootloader/grub.scm (eye-candy): Refer to the native FONT-FILE.
(keyboard-layout-file): Refer to the native 'grub-mklayout'.
| Ludovic Courtès |
| 2020-04-23 | Merge branch 'master' into core-updates... Conflicts:
etc/news.scm
gnu/local.mk
gnu/packages/bootloaders.scm
gnu/packages/linphone.scm
gnu/packages/linux.scm
gnu/packages/tls.scm
gnu/system.scm
| Marius Bakke |
| 2020-04-20 | gnu: Add u-boot-pinebook-pro-rk3399....* gnu/packages/bootloaders (u-boot-pinebook-pro-rk3399): New variable.
* gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch: New file.
* gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch: New file.
* gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch: New file.
* gnu/packages/patches/u-boot-leds-common-binding-con.patch: New file.
* gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch: New file.
* gnu/packages/patches/u-boot-video-rockchip-fix-build.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add new patches.
* gnu/bootloader/u-boot.scm (install-pinebook-pro-rk3399-u-boot,
u-boot-pinebook-pro-rk3399-bootloader): New variable.
Co-authored-by: Jan Nieuwenhuizen <janneke@gnu.org>
| Vagrant Cascadian |
| 2020-04-08 | Merge branch 'master' into core-updates... Conflicts:
etc/news.scm
gnu/local.mk
gnu/packages/check.scm
gnu/packages/cross-base.scm
gnu/packages/gimp.scm
gnu/packages/java.scm
gnu/packages/mail.scm
gnu/packages/sdl.scm
gnu/packages/texinfo.scm
gnu/packages/tls.scm
gnu/packages/version-control.scm
| Marius Bakke |
| 2020-04-06 | system: Allow for comma-separated keyboard layouts....Reported by Florian Pelz <pelzflorian@pelzflorian.de>.
* gnu/bootloader/grub.scm (keyboard-layout-file): Replace commas with
hyphens in the first argument to 'computed-file'.
* gnu/system/keyboard.scm (keyboard-layout->console-keymap): Likewise.
* doc/guix.texi (Keyboard Layout): Add example.
| Ludovic Courtès |
| 2020-03-29 | gnu: bootloader: Add grub-minimal-bootloader....* gnu/bootloader/grub.scm (grub-minimal-bootloader): New variable.
| Jan Nieuwenhuizen |
| 2020-03-17 | bootloader: grub: Refactor eye-candy a bit....* gnu/bootloader/grub.scm (eye-candy)[setup-gfxterm-body]: Define the GFXMODE
binding using AND-LET* instead of chained AND=>. Add a comment about
supporting graphical mode on other systems than x86. Generate configuration
string using FORMAT rather than STRING-APPEND.
| Maxim Cournoyer |
| 2020-03-17 | bootloader: grub: Use the all_video module in graphic mode....* gnu/bootloader/grub.scm (eye-candy): Load the module 'all_video'
which automatically loads all the available and relevant video
modules.
| Maxim Cournoyer |
| 2020-02-02 | gnu: Add u-boot-cubietruck-bootloader....* gnu/bootloader/u-boot.scm (u-boot-cubietrack-bootloader): New
variable.
| Julien Lepiller |
| 2020-01-25 | bootloader: grub: Add gfxmode (resolution) override....* gnu/bootloader/grub.scm (<grub-theme>): Add `gfxmode' entry.
(eye-candy): Use it.
* doc/guix.texi (Bootloader Configuration): Document it.
| Jan Nieuwenhuizen |
| 2020-01-07 | Revert "bootloader: grub: Add gfxmode (resolution) override."...This reverts commit a23091880d4dc6115acbfa3b7ef09d731fc5abb0.
It causes ‘guix pull’ to fail: <https://paste.debian.net/plain/1125061>.
| Tobias Geerinckx-Rice |
| 2020-01-07 | bootloader: grub: Add gfxmode (resolution) override....* gnu/bootloader/grub.scm (<grub-theme>): Add `gfxmode' entry.
(eye-candy): Use it.
* doc/guix.texi (Bootloader Configuration): Document it.
| Jan Nieuwenhuizen |
| 2020-01-06 | Adjust module autoloads....In Guile < 2.9.7, autoloading a module would give you access to all its
bindings. In future versions, autoloading a module gives access only to
the listed bindings, as per #:select (see <https://bugs.gnu.org/38895>).
This commit adjusts autoloads to the new semantics, allowing Guix to be
built with Guile 2.9.7/2.9.8.
* guix/build/download.scm <top level>: Remove call to 'module-autoload!'.
(load-gnutls): New procedure.
(tls-wrap): Call it.
* guix/git.scm <top level>: Remove call to 'module-autoload!'.
(load-git-submodules): New procedure.
(update-submodules): Call it instead of 'resolve-interface'.
* gnu/bootloader/grub.scm: Replace #:autoload with #:use-module.
* gnu/packages.scm: Likewise.
* gnu/packages/ssh.scm: Likewise.
* gnu/packages/tex.scm: Likewise.
* gnu/services/cuirass.scm: Likewise.
* gnu/services/mcron.scm: Likewise.
* guix/lint.scm: Augment list of bindings in #:autoload.
* guix/scripts/build.scm: Likewise.
* guix/scripts/gc.scm: Likewise.
* guix/scripts/pack.scm: Likewise.
* guix/scripts/publish.scm: Likewise.
* guix/scripts/pull.scm: Likewise.
* guix/utils.scm: Remove unnecessary #:autoload clauses; replace one
of them with #:use-module.
| Ludovic Courtès |
| 2020-01-03 | bootloader: Mark "grub.cfg" and "extlinux.conf" as non-substitutable....Suggested by <pkill9@runbox.com>.
* gnu/bootloader/grub.scm (grub-configuration-file): Pass #:options to
'computed-file'.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise.
| Ludovic Courtès |
| 2019-12-23 | bootloader: grub: Add firmware setup entry....* gnu/bootloader/grub.scm (grub-configuration-file): Add 'Firmware
setup' entry for EFI platform.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
| Brice Waegeneire |
| 2019-12-14 | gnu: Add u-boot-pine64-lts-bootloader....* gnu/bootloader/u-boot.scm (u-boot-pine64-lts-bootloader): New variable.
| Mathieu Othacehe |
| 2019-10-18 | gnu: Add u-boot-firefly-rk3399....* gnu/packages/bootloaders (u-boot-firefly-rk3399): New variable.
* gnu/bootloader/u-boot (install-firefly-rk3399-u-boot): New variable.
(u-boot-firefly-rk3399-bootloader): New variable.
* gnu/system/install (define firefly-rk3399-installation-os): New variable.
| Vagrant Cascadian |
| 2019-10-18 | gnu: Add u-boot-rock64-rk3328....* gnu/packages/bootloaders (u-boot-rock64-rk3328): New variable.
* gnu/bootloader/u-boot (install-rock64-rk3328-u-boot): New variable.
(u-boot-rock64-rk3328-bootloader): New variable.
* gnu/system/install (define rock64-installation-os): New variable.
| Vagrant Cascadian |
| 2019-10-18 | gnu: Add u-boot-rockpro64-rk3399...* gnu/packages/bootloaders.scm (u-boot-rockpro64-rk3399): New exported
variable.
(u-boot-2019.10): New variable.
* gnu/bootloader/u-boot.scm (u-boot-rockpro64-rk3399-bootloader): New exported
variable.
(install-rockpro64-rk3399-u-boot): New variable.
* gnu/system/install.scm (rockpro64-installation-os): New exported variable.
Adjusted-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Caliph Nomble <nomble@palism.com>
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
| Caliph Nomble |
| 2019-05-09 | bootloader: grub: Remove unneeded 'terminal_output'....Fixes <https://bugs.gnu.org/35585>.
Reported by Florian Pelz <pelzflorian@pelzflorian.de>.
This statement was added in 8d058e7b1b1a409d3d9cc29c5650a98db4e78783 but
turned out to be unnecessary.
* gnu/bootloader/grub.scm (grub-configuration-file): Remove
'terminal_output' statement.
| Ludovic Courtès |
