| Age | Commit message (Expand) | Author |
|---|
| 2019-01-28 | doc: Clarify 'sudo' vs. 'guix pull' and 'guix system reconfigure'....* doc/guix.texi (Proceeding with the Installation): Clarify use of
"sudo" with "guix pull" and "guix system reconfigure".
| Ludovic Courtès |
| 2019-01-26 | doc: Update bit about GUIX_LD_WRAPPER_ALLOW_IMPURITIES....This is a followup to d0a2db47fb550d684c47a0ae3b541a9a71727d9e.
* doc/guix.texi (Application Setup)[The GCC toolchain]: Adjust bit
about GUIX_LD_WRAPPER_ALLOW_IMPURITIES.
| Ludovic Courtès |
| 2019-01-26 | doc: Switch from "GuixSD" to "Guix System"....* doc/guix.texi (Introduction): Add footnote about the change from
"GuixSD" to "Guix System".
Replace occurrences of "GuixSD" with "Guix System", "Guix", "system", or
other appropriate phrases.
| Ludovic Courtès |
| 2019-01-26 | doc: Make /dev/kvm note more visible....Suggested by Giovanni Biscuolo <g@xelera.eu>.
* doc/guix.texi (Invoking guix system): Move note about /dev/kvm access
to the beginning of the 'vm' action description.
| Ludovic Courtès |
| 2019-01-25 | weather: Add '--coverage'....* guix/scripts/weather.scm (show-help, %options): Add '--coverage'.
(package-partition-boundary, package->output-mapping)
(substitute-oracle, report-package-coverage-per-system)
(report-package-coverage): New procedures.
(guix-weather): Honor '--coverage'.
* doc/guix.texi (Invoking guix weather): Document it.
| Ludovic Courtès |
| 2019-01-23 | doc: Replace some cons* with beginner-friendly (append (list ...))....* doc/guix.texi (Base Services): Do it.
| Pierre Neidhardt |
| 2019-01-23 | doc: Correct EFI-specific system configuration details....* doc/guix.texi (Preparing for Installation): /boot/efi is arbitrary.
Mention /boot/efi consistently.
(Proceeding with the Installation): Make it explicit that the EFI mount point
must both be mounted and be specified in the system configuration.
| Pierre Neidhardt |
| 2019-01-22 | doc: Move "Package Modules" under "Programming Interface"....* doc/guix.texi (Package Modules): Move to...
(Programming Interface): ... here. Turn into a section.
| Ludovic Courtès |
| 2019-01-22 | doc: Move "Packaging Guidelines" under "Contributing"....* doc/guix.texi (Packaging Guidelines): Move to...
* doc/contributing.texi (Packaging Guidelines): ... here. Turn into a
section. Adjust references to "Contributing".
| Ludovic Courtès |
| 2019-01-22 | doc: Move "System Installation" right after "Installation"....* doc/guix.texi (System Installation): Move right after "Installation".
| Ludovic Courtès |
| 2019-01-22 | doc: Move sections under "GNU Distribution" one level higher....* doc/guix.texi (Introduction): Add note about Guix System.
[Managing Software the Guix Way]: New section heading.
[GNU Distribution]: New subsection of "Introduction". Mention "Guix
System" rather than "GuixSD" and update the list of supported systems.
(GNU Distribution): Remove as a chapter.
(System Installation, System Configuration, Documentation)
(Installing Debugging Files, Security Updates, Package Modules)
(Packaging Guidelines, Bootstrapping, Porting): Turn these sections
into chapters.
| Ludovic Courtès |
| 2019-01-21 | store: Rename '&nix-error' to '&store-error'....* guix/store.scm (&nix-error): Rename to...
(&store-error): ... this, and adjust users.
(&nix-connection-error): Rename to...
(&store-connection-error): ... this, and adjust users.
(&nix-protocol-error): Rename to...
(&store-protocol-error): ... this, adjust users.
(&nix-error, &nix-connection-error, &nix-protocol-error): Define these
condition types and their getters as deprecrated aliases.
* build-aux/run-system-tests.scm, guix/derivations.scm,
guix/grafts.scm, guix/scripts/challenge.scm,
guix/scripts/graph.scm, guix/scripts/lint.scm,
guix/scripts/offload.scm, guix/serialization.scm,
guix/ssh.scm, guix/tests.scm, guix/ui.scm,
tests/derivations.scm, tests/gexp.scm, tests/guix-daemon.sh,
tests/packages.scm, tests/store.scm, doc/guix.texi: Adjust to use the
new names.
| Ludovic Courtès |
| 2019-01-17 | services: openssh: Add escape hatch....* gnu/services/ssh.scm (<openssh-configuration>)[extra-content]: New field.
* doc/guix.texi (Networking Services): Document it.
| Ricardo Wurmus |
| 2019-01-17 | doc: Document the graphical installer....* doc/guix.texi (Preparing for Installation): Mention the graphical installer.
| Mathieu Othacehe |
| 2019-01-16 | doc: Add missing parameter to guix system reconfigure...* doc/guix.texi (Proceeding with the Installation): Mention that
/etc/config.scm must be passed as parameter and that root is needed.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Damien Cassou |
| 2019-01-16 | services: avahi: Deprecate the 'avahi-service' procedure....* gnu/services/avahi.scm (<avahi-configuration>): Export getters. Add
default values.
(avahi-service-type)[default-value]: New field.
(avahi-service): Mark as deprecated.
* gnu/services/desktop.scm (%desktop-services): Use the 'service' form
instead of calling 'avahi-service'.
* gnu/tests/base.scm (%avahi-os): Likewise.
* doc/guix.texi (Base Services): Adjust example accordingly.
(Networking Services): Update accordingly.
| Ludovic Courtès |
| 2019-01-11 | guix build: Re-purpose '--verbosity' and add '--debug'....The previous '--verbosity' option was misleading and rarely what users
were looking for. The new option provides a consistent way to choose
whether or not to display the build log.
* guix/scripts/build.scm (show-build-options-help): Remove "--verbosity"
and add "--debug".
(set-build-options-from-command-line): Use the 'debug key of OPTS for
#:verbosity.
(%standard-build-options): Change "verbosity" to "debug". Use
'string->number*' instead of 'string->number'.
(%default-options): Change 'verbosity to 'debug and add a 'verbosity
key.
(show-help): Add '--verbosity'.
(%options): Likewise, and change '--quiet' to set the 'verbosity key of
RESULT.
(guix-build): Use 'with-status-verbosity' instead of parameterizing
CURRENT-BUILD-OUTPUT-PORT, honor the 'verbosity key of OPTS, and remove
'quiet?'.
* guix/scripts/environment.scm (show-help, %options): Add '--verbosity'.
(%default-options): Add 'debug'.
(guix-environment): Honor the 'verbosity key of OPTS.
* guix/scripts/pack.scm (%default-options): Add 'debug.
(%options, show-help): Add '--verbosity'.
(guix-pack): Honor the 'verbosity key of OPTS.
* guix/scripts/package.scm (%default-options): Add 'debug.
(show-help, %options): Add '--verbosity'. Mark '--verbose' as
deprecated and change it to set 'verbosity.
(guix-package): Honor the 'verbosity key of OPTS and remove 'verbose?'.
* guix/scripts/pull.scm (%default-options): Add 'debug.
(show-help, %options): Add '--verbosity'.
(guix-pull): Honor the 'verbosity key of OPTS.
* guix/scripts/system.scm (show-help, %options): Add '--verbosity'.
(%default-options): Add 'debug.
(guix-system): Honor the 'verbosity key of OPTS.
* guix/scripts/archive.scm (%default-options): Add 'debug,
'print-build-trace?, 'print-extended-build-trace?, and
'multiplexed-build-output?.
(show-help, %options): Add '--verbosity'.
(export-from-store): Remove call to 'set-build-options-from-command-line'.
(guix-archive): Wrap body in 'with-status-verbosity'. Add call to
'set-build-options-from-command-line.
* doc/guix.texi (Common Build Options): Document '--verbosity' and
'--debug'.
(Additional Build Options): Adjust description of '--quiet'.
| Ludovic Courtès |
| 2019-01-11 | services: Deprecate a few more service procedures....These procedures were already either undocumented (and de facto
deprecated) or documented as deprecated or redundant.
* gnu/services/base.scm (guix-service, guix-publish-service): Mark as
deprecated.
* gnu/services/mcron.scm (mcron-service): Likewise.
* gnu/services/networking.scm (tor-service): Likewise.
* doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and
adjust example.
(Networking Services): Remove 'tor-service'.
* gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of
'mcron-service'.
* gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of
'tor-service'.
* tests/guix-system.sh: Likewise.
| Ludovic Courtès |
| 2019-01-10 | services: Add docker....* gnu/services/docker.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* doc/guix.texi (Miscellaneous Services): Document the service.
| Danny Milosavljevic |
| 2019-01-09 | build: Require Guile 2.2....* configure.ac: Require Guile 2.2.
* README: Adjust accordingly.
* doc/guix.texi (Requirements): Likewise.
* gnu/packages/package-management.scm (guile2.0-guix): Deprecate.
(guix-minimal): Inherit from GUIX, not from GUILE2.0-GUIX.
| Ludovic Courtès |
| 2019-01-08 | doc: Recommend using the installer script....* doc/guix.texi (Installation): Make it clear that the installer script is the
recommended, easy way to install Guix.
| Ricardo Wurmus |
| 2018-12-27 | lint: Check for unstable tarballs....* guix/scripts/lint.scm (check-source-unstable-tarball): New procedure.
(%checkers): Add it.
* tests/lint.scm ("source-unstable-tarball", "source-unstable-tarball:
source #f", "source-unstable-tarball: valid", "source-unstable-tarball:
package named archive", "source-unstable-tarball: not-github",
"source-unstable-tarball: git-fetch"): New tests.
* doc/guix.texi (Invoking guix lint): Document it.
| Efraim Flashner |
| 2018-12-27 | pull: Add '--system'....* guix/scripts/pull.scm (%options): Add '--system'.
(guix-pull): Honor it.
* doc/guix.texi (Invoking guix pull): Document it.
| Ludovic Courtès |
| 2018-12-24 | offload: Use (guix inferior) instead of (ssh dist node)....Using inferiors and thus 'guix repl' simplifies setup on build
machines (no need to worry about GUILE_LOAD_PATH etc.)
Furthermore, the 'guix repl -t machine' protocol running in a remote
pipe addresses several issues with the current implementation of nodes
and RREPLs in Guile-SSH: fewer round trips, doesn't leave a 'guile
--listen' process behind it, stateless (since a new process is started
each time), more efficient (the SSH channel can be reused), more
reliable (no 'pgrep', 'pkill', and shellology; see
<https://github.com/artyom-poptsov/guile-ssh/issues/11> as an example.)
* guix/ssh.scm (inferior-remote-eval): New procedure.
(send-files): Use it instead of 'make-node' and 'node-eval'.
* guix/scripts/offload.scm (node-guile-version): New procedure.
(node-free-disk-space, transfer-and-offload, node-load)
(choose-build-machine, assert-node-has-guix): Use 'remote-inferior'
instead of 'make-node' and 'inferior-eval' instead of 'node-eval'.
(assert-node-can-import, assert-node-can-export): Likewise, and add
'session' parameter.
(check-machine-availability): Likewise, and add calls to
'close-inferior' and 'disconnect!'.
(check-machine-status): Likewise.
* doc/guix.texi (Daemon Offload Setup): Remove bit related to 'guile' in
$PATH and $GUILE_LOAD_PATH; mention 'guix' alone.
| Ludovic Courtès |
| 2018-12-24 | doc: Fix typo....This is a follow-up to c39491829a0c1d870f8133b8f7a699152fc71503
* doc/guix.texi (Invoking guix refresh): Fix texinfo markup
| Efraim Flashner |
| 2018-12-24 | scripts: refresh: Allow searching recursively....* guix/scripts/refresh.scm (refresh-recursive, list-transitive): New
procedures.
(show-help): Document it.
(guix-refresh): Add flags and checks for new options.
* doc/guix.texi (Invoking guix refresh): Document new options.
| Efraim Flashner |
| 2018-12-24 | services: Add quassel....* gnu/services/messaging.scm (<quassel-configuration>): New record type.
(%quassel-account, %quassel-activation): New procedures.
(quassel-service-type): New variable.
* gnu/tests/messaging.scm (%test-quassel): New variable.
(run-quassel-test): New procedure.
* doc/guix.texi (Messaging): Document quassel service.
| Efraim Flashner |
| 2018-12-24 | guix: lint: Check for source URIs redirecting to GitHub....* guix/scripts/lint.scm (check-github-uri): New procedure.
(%checkers): Add it.
* doc/guix.texi (Invoking guix lint): Document it.
* tests/lint.scm ("github-url", "github-url: one suggestion"): New tests.
| Arun Isaac |
| 2018-12-23 | doc: Fix ‘serice’ -> ‘service’ typos....* doc/guix.texi (Web Services): Fix typos.
| Tobias Geerinckx-Rice |
| 2018-12-21 | doc: '--search' is case-insensitive....Suggested by Chris Marusich <cmmarusich@gmail.com>.
* doc/guix.texi (Invoking guix package): Mention that --search is
case-insensitive.
| Ludovic Courtès |
| 2018-12-18 | build: Add dune-build-system....* guix/build/dune-build-system.scm,
guix/build-system/dune.scm: New files.
* Makefile.am (MODULES): Add them.
* doc/guix.texi (Build Systems): Document dune-build-system.
* guix/build-system/ocaml.scm (lower, default-findlib, default-ocaml): Export
them.
(package-with-explicit-ocaml): Also transform packages built with
dune-build-system.
| Julien Lepiller |
| 2018-12-18 | doc: Remove stale reference to 'hydra.gnu.org'....Reported by Thomas Schmitt <scdbackup@gmx.net>.
* doc/guix.texi (Binary Installation): Refer to SUBSTITUTE-SERVER, not
to 'hydra.gnu.org'.
| Ludovic Courtès |
| 2018-12-18 | guix system: Clarify the three strategies available....* guix/scripts/system.scm (show-help): Clarify the three choices.
* doc/guix.texi (Invoking guix system): Add 3 @cindex to make on-error=strategy
easier to find.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| swedebugia |
| 2018-12-18 | doc: Fix typo in '.guix-channel' example....* doc/guix.texi (Channels): Remove extra quote in '.guix-channel'
example.
| Ludovic Courtès |
| 2018-12-18 | doc: Replace 'https-port' with 'listen' in nginx php example....* doc/guix.texi (Web Services): Update accordingly.
| Jelle Licht |
| 2018-12-17 | environment: Support package transformation options....Fixes <https://bugs.gnu.org/33776>.
Reported by Adrien Guilbaud <adrien.guilbaud@inria.fr>.
* guix/scripts/environment.scm (show-help): Add call to
'show-transformation-options-help'.
(%options): Add %TRANSFORMATION-OPTIONS.
(options/resolve-packages): Add 'store' parameter.
[transform, package->manifest-entry*]: New procedures.
Use 'package->manifest-entry*' instead of 'package->manifest-entry'.
(guix-environment): Move definition of 'manifest' within 'with-store'.
* tests/guix-environment.sh: Add test.
| Ludovic Courtès |
| 2018-12-17 | services: udev: Add 'rules' action....* gnu/services/base.scm (udev-shepherd-service): Add 'actions' field.
* doc/guix.texi (Base Services): Move "@end deffn" after 'udev-service'
definition. Mention 'herd rules udev'.
| Ludovic Courtès |
| 2018-12-17 | services: monitoring: Add 'zabbix-front-end'....* gnu/services/monitoring.scm (nginx-server-configuration-list?,
serialize-nginx-server-configuration-list, zabbix-front-end-configuration,
zabbix-front-end-config, zabbix-front-end-activation,
generate-zabbix-front-end-documentation): New procedures.
(%zabbix-front-end-configuration-nginx, %maintenance.inc.php,
zabbix-front-end-service-type): New variables.
* doc/guix.texi (Monitoring Services): Document this.
| Oleg Pykhalov |
| 2018-12-17 | services: php-fpm: Add 'timezone' configuration....* gnu/services/web.scm: (<php-fpm-configuration>)[timezone]: New record field.
(default-php-fpm-config, php-fpm-shepherd-service, php-fpm-activation): Use
this.
* doc/guix.texi (Web Services): Document this.
| Oleg Pykhalov |
| 2018-12-17 | services: monitoring: Add 'zabbix-agent'....* gnu/services/monitoring.scm (zabbix-server-service-type,
zabbix-agent-account, zabbix-agent-activation, zabbix-agent-config-file,
zabbix-agent-shepherd-service, generate-zabbix-agent-documentation): New
procedures.
(zabbix-agent-service-type): New 'service-type'.
* gnu/tests/monitoring.scm (run-zabbix-server-test): Test 'zabbix-agent'.
(%zabbix-os): Add 'zabbix-agent' service.
* doc/guix.texi (Monitoring Services): Document 'zabbix-agent'.
| Oleg Pykhalov |
| 2018-12-17 | services: monitoring: Add 'zabbix-server'....* gnu/services/monitoring.scm (uglify-field-name, serialize-field,
serialize-number, serialize-list, serialize-string, group?, serialize-group,
include-files?, serialize-include-files, zabbix-server-account,
zabbix-server-config-file, zabbix-server-activation,
zabbix-server-shepherd-service, generate-zabbix-server-documentation,
extra-options, serialize-extra-options): New procedures.
(zabbix-server-service-type): New variable.
* gnu/tests/monitoring.scm (%psql-user-create-zabbix,
%psql-db-zabbix-create-script, %psql-db-create-zabbix, %psql-db-import-zabbix,
%zabbix-os, %test-zabbix): New variables.
(run-zabbix-server-test): New procedure.
* doc/guix.texi (Monitoring Services): Document 'zabbix-server'.
squash! services: monitoring: Add 'zabbix-server'.
| Oleg Pykhalov |
| 2018-12-15 | doc: Replace @command by @code for packages...* doc/contributing.texi (Submitting Patches): Replace @command by @code for
packages.
| Pierre Neidhardt |
| 2018-12-15 | doc: Merge "discourage use of texlive" with existing paragraph on "guix size"...* doc/contributing.texi (Submitting Patches): Merge "discourage use of
texlive" with existing paragraph on "guix size".
| Pierre Neidhardt |
| 2018-12-14 | doc: Discourage the use of texlive as input...* doc/contributing.texi (Submitting Patches): Discourage the use of texlive as
input.
| Pierre Neidhardt |
| 2018-12-09 | guix: Add support for channel dependencies....* guix/channels.scm (<channel-metadata>): New record.
(read-channel-metadata, channel-instance-dependencies): New procedures.
(latest-channel-instances): Include channel dependencies; add optional
argument PREVIOUS-CHANNELS.
(channel-instance-derivations): Build derivation for additional channels and
add it as dependency to the channel instance derivation.
* doc/guix.texi (Channels): Add subsection "Declaring Channel Dependencies".
* tests/channels.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
| Ricardo Wurmus |
| 2018-12-05 | doc: Update "Limitations"....* doc/guix.texi (Limitations): Update package count.
| Ludovic Courtès |
| 2018-12-04 | doc: Update substitute server....Fixes an accidental revert in commit
0a5fa004f7f21dc3e01747b8e94fbb21e056e4ca.
* doc/guix.texi (SUBSTITUTE-SERVER): Really change to ci.guix.info.
| Ludovic Courtès |
| 2018-12-04 | build: Default to https://ci.guix.info for substitutes....* config-daemon.ac (guix_substitute_urls): Always default to
"https://ci.guix.info".
* doc/guix.texi (SUBSTITUTE-SERVER): Switch to ci.guix.info.
* guix/scripts/build.scm (%default-log-urls): Likewise.
* guix/scripts/substitute.scm (%default-substitute-urls): Likewise.
* guix/store.scm (%default-substitute-urls): Likewise.
| Ludovic Courtès |
| 2018-12-04 | Remove most references to hydra.gnu.org....* Makefile.am (assert-binaries-available): Don't mention hydra.gnu.org
in comment.
* build-aux/check-available-binaries.scm: Likewise.
* build-aux/check-final-inputs-self-contained.scm: Likewise.
* doc/guix.texi (SUBSTITUTE-SERVER): New variable.
Use it throughout instead of "mirror.hydra.gnu.org".
* doc/contributing.texi (Submitting Patches): Likewise.
* gnu/services/base.scm (hydra-key-authorization)
(guix-activation): Remove mentions of "hydra.gnu.org" in comments and
messages.
* gnu/system/install.scm (%installation-services): Likewise.
* guix/scripts/size.scm (guix-size): Likewise.
| Ludovic Courtès |
| 2018-12-03 | doc: Remove footnotes about guile-json requirements....Follow-up to 6efccabe4e2e3ea1bd14cd0e81bdb83d5f6baaea.
* doc/guix.texi (Invoking guix import)[pypi, gem, cpan, json]: Remove
footnotes mentioning requirement for Guile-JSON.
| Eric Bavier |
