aboutsummaryrefslogtreecommitdiff
path: root/tests/cache.scm
diff options
context:
space:
mode:
Diffstat (limited to 'tests/cache.scm')
0 files changed, 0 insertions, 0 deletions
generated by cgit
-supplementary-groups. (greetd-service-type): Adjust accordingly. * gnu/tests/desktop.scm (%minimal-services): Add test for greeter-supplementary-groups. * doc/guix.texi ("Base Services")[greetd-service-type]: Document greeter-supplementary-groups. muradm 2022-08-26gnu: seatd-service-type: Use seat group....* gnu/services/desktop.scm (seatd-group-sanitizer): New variable. (<seatd-configuration>)[user]: Removed field. [group]: Changed to "seat". Sanitize via seatd-group-sanitizer. (seatd-accounts): New variable. (seatd-environment): Adjust to <seatd-configuration> ABI. (seatd-service-type)[extensions]: Add account-service-type with seatd-accounts. * gnu/tests/desktop.scm (run-minimal-desktop-test): Check for correct ownership of $SEATD_SOCK. * doc/guix.texi ("Desktop Services")[seatd-service-type]: Mention that users may need to become members of the "seat" group. Update default value for group field. Add explanation on seatd.sock file. Remove dropped user field. muradm 2022-08-09tests: Add qemu-guest-agent system test....Enable the QEMU guest agent interface in marionette VMs, run the qemu-guest-agent service in one and try talking to it. * gnu/build/marionette.scm (make-marionette): Enable the guest agent device. * gnu/tests/virtualization.scm (run-qemu-guest-agent-test): New procedure. (%test-qemu-guest-agent): New variable. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Timotej Lazar 2022-08-09system: install: Always use 'current-guix'....Fixes <https://issues.guix.gnu.org/53210>. Reported by Mathieu Othacehe <othacehe@gnu.org>. * gnu/system/install.scm (%installation-services): Set 'guix' to use (current-guix) in 'guix-configuration'. * gnu/system/examples/vm-image.tmpl: Likewise. * gnu/tests/install.scm (operating-system-with-current-guix): Remove. (run-install, installation-os-for-gui-tests): Remove its uses. * Makefile.am (release): Remove intermediate use of 'update-guix-package.scm' and subsequent 'git commit' invocation. Ludovic Courtès 2022-08-01gnu: telephony: Add a Jami test for a partially defined jami-account....* gnu/tests/telephony.scm (%dummy-jami-account-partial): New variable. (make-jami-os): Add a PARTIAL? argument and use it to select the jami-account variant to use. (%jami-os-provisioning-partial): New variable. (run-jami-test): Add a PARTIAL? argument, and use it to select operating system variant. Skip allowed-contacts and moderators test when PARTIAL? is true. (%test-jami-provisioning-partial): New test. Maxim Cournoyer 2022-07-15gnu: tests: Fix guix-data-service test....Since revision 32, guix-data-service starts immediately but returns an HTTP error code until initialization is complete. Adjust the test accordingly, and remove the increased startup time limit. * gnu/services/guix.scm (guix-data-service): Use default #:pid-file-timeout. * gnu/tests/guix.scm (guix-data-service): Retry the http-get test several times to give the service time to initialize. Signed-off-by: Christopher Baines <mail@cbaines.net> Timotej Lazar 2022-07-01image: Add default value for partition initializer....Previously, the default value would lead to a wrong-type-to-apply crash. * gnu/system/image.scm (system-disk-image)[image-builder]: When 'partition-initializer' returns #f, fall back to INITIALIZE-ROOT-PARTITION. * gnu/tests/base.scm (run-root-unmount-test)[test-image]: Remove 'initializer' field of partition. * gnu/image.scm (<partition>)[initializer]: Add comment. Ludovic Courtès 2022-07-01services: root-file-system: Cleanly unmount upon shutdown....Fixes <https://issues.guix.gnu.org/56209>. Reported by angry rectangle <angryrectangle@cock.li>. * gnu/packages/admin.scm (shepherd-0.9)[modules, snippet]: New fields. * gnu/services/base.scm (%root-file-system-shepherd-service): In 'stop' method, remove 'call-with-blocked-asyncs'. When 'mount' throws to 'system-error, call (@ (fibers) sleep) and try again. * gnu/tests/base.scm (run-root-unmount-test): New procedure. (%test-root-unmount): New variable. Ludovic Courtès 2022-06-24tests: ldap: Increase VM memory size....With the default limit of 512 MB the test sometimes fails, in different ways. Fixes https://issues.guix.gnu.org/55206. * gnu/tests/ldap.scm (run-ldap-test): Increase memory size to 1024 MiB. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Timotej Lazar 2022-06-24tests: docker: Relax marionette timeout....The tests would otherwise fail on an old desktop. * gnu/tests/docker.scm (run-docker-test) <make-marionette>: Specify a timeout of 60 s. (run-docker-system-test) <make-marionette>: Likewise. Maxim Cournoyer 2022-06-17gnu: tests: Add seatd/greetd based minimal desktop system tests....* gnu/tests/desktop.scm (minimal-desktop): seatd/greetd based minimal desktop test Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org> muradm 2022-06-10services: jami: Modernize to adjust to Shepherd 0.9+ changes....This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami' and 'jami-provisioning' system tests to pass again. In version 0.9.0, Shepherd constructors are now run concurrently, via cooperative scheduling (Guile Fibers). The Jami service previously relied on blocking sleeps while polling for D-Bus services to become ready after forking a process; this wouldn't work anymore since while blocking the service process wouldn't be given the chance to finish starting. The new reliance on Fibers in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant that it wouldn't work outside of Shepherd anymore. Finally, the 'start-service' Shepherd procedure used in the test suite would cause the Jami daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0). To fix/simplify these problems, this change does the following: 1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify things, such as avoiding the need to fork 'dbus-send' processes. 2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries' waiting syntax. 3. A 'dbus' package variant is used to adjust the session bus configuration, tailoring it for the use case at hand. 4. Avoid start-service in the tests, preferring 'jami-service-available?' for now. * gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes) (deserialize-item, serialize-boolean, dbus-dict->alist) (dbus-array->list, parse-account-ids, parse-account-details) (parse-contacts): Delete procedures. (%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group) (%send-dbus-debug): Delete parameters. (jami-service-running?): New procedure. (send-dbus/configuration-manager): Rename to... (call-configuration-manager-method): ... this. Turn METHOD into a positional argument. Turn ARGUMENTS into an optional argument. Invoke `call-dbus-method' instead of `send-dbus', adjusting callers accordingly. (get-account-ids, id->account-details, id->account-details) (id->volatile-account-details, username->id, add-account remove-account) (username->contacts, remove-contact, add-contact, set-account-details) (set-all-moderators, username->all-moderators?, username->moderators) (set-moderator): Adjust accordingly. (with-retries, send-dbus, dbus-available-services) (dbus-service-available?): Move to ... * gnu/build/dbus-service.scm: ... this new module. (send-dbus): Rewrite to use the Guile AC/D-Bus library. (%dbus-query-timeout, sleep*): New variables. (%current-dbus-connection): New parameter. (initialize-dbus-connection!, argument->signature-type) (call-dbus-method): New procedures. (dbus-available-services): Adjust accordingly. * gnu/local.mk (GNU_SYSTEM_MODULES): Register new module. * gnu/packages/glib.scm (dbus-for-jami): New variable. * gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to dbus-for-jami. (jami-dbus-session-activation): Write a D-Bus daemon configuration file at '/var/run/jami/session-local.conf'. (jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers as extensions. Adjust imported modules. Remove no longer used parameters. <jami-dbus-session>: Use a PID file, avoiding the need for the manual synchronization. <jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using 'jami-service-available?' instead of 'dbus-service-available?'. * gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use 'jami-service-available?' to determine if the service is started rather than the now problematic Shepherd's 'start-service'. Maxim Cournoyer 2022-06-05tests: childhurd: Make sure "guix build -d" works....* gnu/tests/virtualization.scm (run-childhurd-test) ["guix-daemon up and running"]: New test. Ludovic Courtès 2022-06-05tests: childhurd: Generalize command execution over SSH....* gnu/tests/virtualization.scm (run-childhurd-test)[run-uname-over-ssh]: Rename to... [run-command-over-ssh]: ... this. Add 'command' parameter and honor it. ["SSH up and running"]: Adjust accordingly. Ludovic Courtès 2022-05-22services: openssh: Listen on both IPv4 and IPv6....Fixes <https://issues.guix.gnu.org/55335>. Reported by Christopher Baines <mail@cbaines.net>. * gnu/services/ssh.scm (openssh-shepherd-service)[inetd-style?]: New variable. <start>: Use it. When using 'make-inetd-constructor', pass a list of endpoints as is possible with the Shepherd 0.9.1. <stop>: Adjust accordingly. * gnu/tests/ssh.scm (run-ssh-test)["wait for port 22"]: Rename to... ["wait for port 22, IPv4"]: ... this. ["wait for port 22, IPv6"]: New test. Ludovic Courtès 2022-05-01services: bitlbee: Use 'make-inetd-constructor'....* gnu/services/messaging.scm (bitlbee-shepherd-service): Add call to 'least-authority-wrapper'. In 'start' method, use 'make-inetd-constructor' when available. * gnu/tests/messaging.scm (run-bitlbee-test)["valid PID"]: Remove test. Ludovic Courtès 2022-05-01tests: Fix tailon test....This is a follow-up of 73eeeeafbb0765f76834b53c9fe6cf3c8f740840. * gnu/tests/web.scm (run-tailon-test): Wait for the TCP port 8080 instead of relying on start-service. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Mathieu Othacehe 2022-04-29tests: Avoid starting services to check whether they're running....Fixes a regression introduced in the Shepherd 0.9.0 whereby clients can start a service that is already being started, leading to two instances of the process (and usually failure of the second attempt to start it). Partly fixes <https://issues.guix.gnu.org/54786>. Reported by Mathieu Othacehe. * gnu/tests/version-control.scm (run-cgit-test) ["nginx running", "fcgiwrap running"]: Wail for a file/TCP port instead of starting the service. (run-git-http-test)["nginx running"]: Likewise. (run-gitile-test)["nginx running"]: Likewise. Ludovic Courtès 2022-04-08tests: Add "encrypted-home-os" installation test....* gnu/tests/install.scm (%encrypted-home-os) (%encrypted-home-installation-script) (enter-luks-passphrase-for-home) (%test-encrypted-home-os): New variables. Ludovic Courtès 2022-04-07services: openssh: Start as an inetd service....* gnu/services/ssh.scm (openssh-shepherd-service): Use 'make-inetd-constructor' when it is defined. (<openssh-configuration>)[max-connections]: New field. * gnu/tests/ssh.scm (run-ssh-test)["sshd PID"]: Adjust to cope with PID-FILE being #f. * gnu/tests/ssh.scm (%test-openssh): Pass #f as the 'pid-file' argument. * doc/guix.texi (Networking Services): Document 'max-connections'. Ludovic Courtès 2022-03-19tests: install: Add two new Btrfs RAID10 install test....* gnu/tests/install.scm (%btrfs-raid10-root-os) (%btrfs-raid10-root-os): New variables. (%btrfs-raid10-root-installation-script): Likewise. (%test-btrfs-raid10-root-images): Likewise. (%test-btrfs-raid10-root-os, %test-btrfs-raid10-root-os-degraded): New tests. Maxim Cournoyer 2022-03-19tests: install: Enable the use of multiple disk devices for tests....* gnu/tests/install.scm (run-install)[packages]: Unconditionally add to OS. [NUMBER-OF-DISKS]: Add argument, update doc and adjust. The returned gexp output is now a list of images rather than the image itself. * gnu/tests/install.scm (qemu-command*): Rename IMAGE argument to IMAGES, to account for the above change. Adjust doc. Generate a QEMU '-drive' argument for each disk image. (%test-installed-os): Rename the IMAGE variable to IMAGES. (%test-installed-extlinux-os): Likewise. (%test-iso-image-installer): Likewise. (%test-separate-home-os): Likewise. (%test-separate-store-os): Likewise. (%test-raid-root-os): Likewise. (%test-encrypted-root-os): Likewise. (%test-lvm-separate-home-os): Likewise. (%test-encrypted-root-not-boot-os): Likewise. (%test-btrfs-root-os): Likewise. (%test-btrfs-raid-root-os): Likewise. (%test-btrfs-root-on-subvolume-os): Likewise. (%test-jfs-root-os): Likewise. (%test-f2fs-root-os): Likewise. (%test-xfs-root-os): Likewise. (guided-installation-test): Likewise. Maxim Cournoyer 2022-03-19tests: install: Streamline 'qemu-command/writable-image'....* gnu/tests/install.scm (qemu-command/writable-image): Replace the use of a writable backing file by the use of the '-snapshot' option, and rename to... (qemu-command*): ... this, adjusting all calls. Maxim Cournoyer 2022-03-19tests: install: Adjust the timeouts on two failing tests....The 'login on tty1' and 'getlogin on tty1' tests were failing on a machine equipped with slower hard drives. * gnu/tests/base.scm (run-basic-test) ["login on tty1", "getlogin on tty1"]: Bump timeout from 10 to 30 s. Maxim Cournoyer 2022-02-21tests: nix: Remove tab characters....* gnu/tests/package-management.scm: Remove them. Mathieu Othacehe 2022-02-21tests: nix: Fix it....The <nix/config.nix> support has been removed in Nix 2.4: https://github.com/NixOS/nix/pull/4025. Rely on the store ping command instead to check that we can communicate with the daemon. * gnu/tests/package-management.scm (run-nix-test): Use the store ping command instead of building a dummy derivation. Mathieu Othacehe 2022-01-31services: guix: Add nar-herder-service-type....* gnu/services/guix.scm (<nar-herder-configuration>): New record type. (nar-herder-configuration, nar-herder-configuration?, nar-herder-configuration-package, nar-herder-configuration-user, nar-herder-configuration-group, nar-herder-configuration-mirror nar-herder-configuration-database nar-herder-configuration-database-dump nar-herder-configuration-host nar-herder-configuration-port nar-herder-configuration-storage nar-herder-configuration-storage-limit nar-herder-configuration-storage-nar-removal-criteria nar-herder-shepherd-services, nar-herder-activation, nar-herder-account): New procedures. (nar-herder-service-type): New variable. * gnu/tests/guix.scm (%test-nar-herder): New variable. * doc/guix.texi (Guix Services): Document the new service. Christopher Baines 2022-01-29tests: Add system test for TimescaleDB....* gnu/tests/databases.scm (%timescaledb-os, run-timescaledb-test, %test-timescaledb): New variables. Marius Bakke 2022-01-29tests: postgresql: Test the default PostgreSQL....* gnu/tests/databases.scm (%postgresql-os): Change from POSTGRESQL-10 to POSTGRESQL. Marius Bakke 2022-01-13services: Adjust the jami service for the upgraded jami....* gnu/services/telephony.scm (jami-configuration)[jamid]: Rename libring to libjami. * gnu/services/telephony.scm (jami-configuration->command-line-arguments): Adjust daemon file name. * gnu/services/telephony.scm (jami-service-type): Adjust doc. * gnu/tests/telephony.scm (run-jami-test): Check for 'jamid' process, not 'dring'. * doc/guix.texi (Telephony Services): Adjust doc for the jami-qt to jami and libring to libjami packages renaming. Maxim Cournoyer