gnu: git: Update to 2.41.0.

* gnu/packages/version-control.scm (git): Update to 2.41.0.
[source]: Remove upstreamed patch.
* gnu/packages/patches/git-header-cmd.patch: Delete file.
* gnu/local.mk (dist_patch_DATA): Remove it.

3 files changed, 3 insertions, 292 deletions

diff --git a/gnu/local.mk b/gnu/local.mk
index 6470f1abd4..fa6f76e790 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -1225,7 +1225,6 @@ dist_patch_DATA =						\
   %D%/packages/patches/genimage-mke2fs-test.patch		\
   %D%/packages/patches/geoclue-config.patch			\
   %D%/packages/patches/gettext-libunicode-update.patch		\
-  %D%/packages/patches/git-header-cmd.patch			\
   %D%/packages/patches/ghc-8.0-fall-back-to-madv_dontneed.patch	\
   %D%/packages/patches/ghc-9.2-glibc-2.33-link-order.patch \
   %D%/packages/patches/ghc-9.2-grep-warnings.patch \
diff --git a/gnu/packages/patches/git-header-cmd.patch b/gnu/packages/patches/git-header-cmd.patch
deleted file mode 100644
index a8964ab174..0000000000
--- a/gnu/packages/patches/git-header-cmd.patch
+++ /dev/null
@@ -1,287 +0,0 @@
-Add a '--header-cmd' to git send-email.
-
-Upstream status can be tracked at:
-https://lore.kernel.org/git/20230423122744.4865-1-maxim.cournoyer@gmail.com/T/#t
-
-diff --git a/Documentation/config/sendemail.txt b/Documentation/config/sendemail.txt
-index 51da7088a8..92a9ebe98c 100644
---- a/Documentation/config/sendemail.txt
-+++ b/Documentation/config/sendemail.txt
-@@ -61,6 +61,7 @@ sendemail.ccCmd::
- sendemail.chainReplyTo::
- sendemail.envelopeSender::
- sendemail.from::
-+sendemail.headerCmd::
- sendemail.signedoffbycc::
- sendemail.smtpPass::
- sendemail.suppresscc::
-diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
-index b0f438ec99..4d2ae061f9 100644
---- a/Documentation/git-send-email.txt
-+++ b/Documentation/git-send-email.txt
-@@ -320,6 +320,17 @@ Automating
- 	Output of this command must be single email address per line.
- 	Default is the value of `sendemail.ccCmd` configuration value.
- 
-+--header-cmd=<command>::
-+	Specify a command that is executed once per outgoing message
-+	and output RFC 2822 style header lines to be inserted into
-+	them. When the `sendemail.headerCmd` configuration variable is
-+	set, its value is always used. When --header-cmd is provided
-+	at the command line, its value takes precedence over the
-+	`sendemail.headerCmd` configuration variable.
-+
-+--no-header-cmd::
-+	Disable any header command in use.
-+
- --[no-]chain-reply-to::
- 	If this is set, each email will be sent as a reply to the previous
- 	email sent.  If disabled with "--no-chain-reply-to", all emails after
-diff --git a/git-send-email.perl b/git-send-email.perl
-index 66c9171109..22a64e608f 100755
---- a/git-send-email.perl
-+++ b/git-send-email.perl
-@@ -87,8 +87,10 @@ sub usage {
- 
-   Automating:
-     --identity              <str>  * Use the sendemail.<id> options.
--    --to-cmd                <str>  * Email To: via `<str> \$patch_path`
--    --cc-cmd                <str>  * Email Cc: via `<str> \$patch_path`
-+    --to-cmd                <str>  * Email To: via `<str> \$patch_path`.
-+    --cc-cmd                <str>  * Email Cc: via `<str> \$patch_path`.
-+    --header-cmd            <str>  * Add headers via `<str> \$patch_path`.
-+    --no-header-cmd                * Disable any header command in use.
-     --suppress-cc           <str>  * author, self, sob, cc, cccmd, body, bodycc, misc-by, all.
-     --[no-]cc-cover                * Email Cc: addresses in the cover letter.
-     --[no-]to-cover                * Email To: addresses in the cover letter.
-@@ -202,7 +204,7 @@ sub format_2822_time {
- 	$author,$sender,$smtp_authpass,$annotate,$compose,$time);
- # Things we either get from config, *or* are overridden on the
- # command-line.
--my ($no_cc, $no_to, $no_bcc, $no_identity);
-+my ($no_cc, $no_to, $no_bcc, $no_identity, $no_header_cmd);
- my (@config_to, @getopt_to);
- my (@config_cc, @getopt_cc);
- my (@config_bcc, @getopt_bcc);
-@@ -269,7 +271,7 @@ sub do_edit {
- # Variables with corresponding config settings
- my ($suppress_from, $signed_off_by_cc);
- my ($cover_cc, $cover_to);
--my ($to_cmd, $cc_cmd);
-+my ($to_cmd, $cc_cmd, $header_cmd);
- my ($smtp_server, $smtp_server_port, @smtp_server_options);
- my ($smtp_authuser, $smtp_encryption, $smtp_ssl_cert_path);
- my ($batch_size, $relogin_delay);
-@@ -318,6 +320,7 @@ sub do_edit {
-     "tocmd" => \$to_cmd,
-     "cc" => \@config_cc,
-     "cccmd" => \$cc_cmd,
-+    "headercmd" => \$header_cmd,
-     "aliasfiletype" => \$aliasfiletype,
-     "bcc" => \@config_bcc,
-     "suppresscc" => \@suppress_cc,
-@@ -519,6 +522,8 @@ sub config_regexp {
- 		    "compose" => \$compose,
- 		    "quiet" => \$quiet,
- 		    "cc-cmd=s" => \$cc_cmd,
-+		    "header-cmd=s" => \$header_cmd,
-+		    "no-header-cmd" => \$no_header_cmd,
- 		    "suppress-from!" => \$suppress_from,
- 		    "no-suppress-from" => sub {$suppress_from = 0},
- 		    "suppress-cc=s" => \@suppress_cc,
-@@ -1780,16 +1785,16 @@ sub process_file {
- 	$subject = $initial_subject;
- 	$message = "";
- 	$message_num++;
--	# First unfold multiline header fields
-+	# Retrieve and unfold header fields.
-+	my @header_lines = ();
- 	while(<$fh>) {
- 		last if /^\s*$/;
--		if (/^\s+\S/ and @header) {
--			chomp($header[$#header]);
--			s/^\s+/ /;
--			$header[$#header] .= $_;
--	    } else {
--			push(@header, $_);
--		}
-+		push(@header_lines, $_);
-+	}
-+	@header = unfold_headers(@header_lines);
-+	# Add computed headers, if applicable.
-+	unless ($no_header_cmd || ! $header_cmd) {
-+		push @header, invoke_header_cmd($header_cmd, $t);
- 	}
- 	# Now parse the header
- 	foreach(@header) {
-@@ -2021,15 +2026,63 @@ sub process_file {
- 	}
- }
- 
-+# Execute a command and return its output lines as an array.  Blank
-+# lines which do not appear at the end of the output are reported as
-+# errors.
-+sub execute_cmd {
-+	my ($prefix, $cmd, $file) = @_;
-+	my @lines = ();
-+	my $seen_blank_line = 0;
-+	open my $fh, "-|", "$cmd \Q$file\E"
-+		or die sprintf(__("(%s) Could not execute '%s'"), $prefix, $cmd);
-+	while (my $line = <$fh>) {
-+		die sprintf(__("(%s) Malformed output from '%s'"), $prefix, $cmd)
-+		    if $seen_blank_line;
-+		if ($line =~ /^$/) {
-+			$seen_blank_line = $line =~ /^$/;
-+			next;
-+		}
-+		push @lines, $line;
-+	}
-+	close $fh
-+	    or die sprintf(__("(%s) failed to close pipe to '%s'"), $prefix, $cmd);
-+	return @lines;
-+}
-+
-+# Process headers lines, unfolding multiline headers as defined by RFC
-+# 2822.
-+sub unfold_headers {
-+	my @headers;
-+	foreach(@_) {
-+		last if /^\s*$/;
-+		if (/^\s+\S/ and @headers) {
-+			chomp($headers[$#headers]);
-+			s/^\s+/ /;
-+			$headers[$#headers] .= $_;
-+		} else {
-+			push(@headers, $_);
-+		}
-+	}
-+	return @headers;
-+}
-+
-+# Invoke the provided CMD with FILE as an argument, which should
-+# output RFC 2822 email headers. Fold multiline headers and return the
-+# headers as an array.
-+sub invoke_header_cmd {
-+	my ($cmd, $file) = @_;
-+	my @lines = execute_cmd("header-cmd", $header_cmd, $file);
-+	return unfold_headers(@lines);
-+}
-+
- # Execute a command (e.g. $to_cmd) to get a list of email addresses
- # and return a results array
- sub recipients_cmd {
- 	my ($prefix, $what, $cmd, $file) = @_;
--
-+	my @lines = ();
- 	my @addresses = ();
--	open my $fh, "-|", "$cmd \Q$file\E"
--	    or die sprintf(__("(%s) Could not execute '%s'"), $prefix, $cmd);
--	while (my $address = <$fh>) {
-+	@lines = execute_cmd($prefix, $cmd, $file);
-+	for my $address (@lines) {
- 		$address =~ s/^\s*//g;
- 		$address =~ s/\s*$//g;
- 		$address = sanitize_address($address);
-@@ -2038,8 +2091,6 @@ sub recipients_cmd {
- 		printf(__("(%s) Adding %s: %s from: '%s'\n"),
- 		       $prefix, $what, $address, $cmd) unless $quiet;
- 		}
--	close $fh
--	    or die sprintf(__("(%s) failed to close pipe to '%s'"), $prefix, $cmd);
- 	return @addresses;
- }
- 
-diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh
-index 6520346246..6519eea1ed 100755
---- a/t/t9001-send-email.sh
-+++ b/t/t9001-send-email.sh
-@@ -374,13 +374,16 @@ test_expect_success $PREREQ,!AUTOIDENT 'broken implicit ident aborts send-email'
- 	)
- '
- 
--test_expect_success $PREREQ 'setup tocmd and cccmd scripts' '
-+test_expect_success $PREREQ 'setup cmd scripts' '
- 	write_script tocmd-sed <<-\EOF &&
- 	sed -n -e "s/^tocmd--//p" "$1"
- 	EOF
--	write_script cccmd-sed <<-\EOF
-+	write_script cccmd-sed <<-\EOF &&
- 	sed -n -e "s/^cccmd--//p" "$1"
- 	EOF
-+	write_script headercmd-sed <<-\EOF
-+	sed -n -e "s/^headercmd--//p" "$1"
-+	EOF
- '
- 
- test_expect_success $PREREQ 'tocmd works' '
-@@ -410,6 +413,70 @@ test_expect_success $PREREQ 'cccmd works' '
- 	grep "^	cccmd@example.com" msgtxt1
- '
- 
-+test_expect_success $PREREQ 'headercmd works' '
-+	clean_fake_sendmail &&
-+	cp $patches headercmd.patch &&
-+	echo "headercmd--X-Debbugs-CC: dummy@example.com" >>headercmd.patch &&
-+	git send-email \
-+		--from="Example <nobody@example.com>" \
-+		--to=nobody@example.com \
-+		--header-cmd=./headercmd-sed \
-+		--smtp-server="$(pwd)/fake.sendmail" \
-+		headercmd.patch \
-+		&&
-+	grep "^X-Debbugs-CC: dummy@example.com" msgtxt1
-+'
-+
-+test_expect_success $PREREQ '--no-header-cmd works' '
-+	clean_fake_sendmail &&
-+	cp $patches headercmd.patch &&
-+	echo "headercmd--X-Debbugs-CC: dummy@example.com" >>headercmd.patch &&
-+	git send-email \
-+		--from="Example <nobody@example.com>" \
-+		--to=nobody@example.com \
-+		--header-cmd=./headercmd-sed \
-+                --no-header-cmd \
-+		--smtp-server="$(pwd)/fake.sendmail" \
-+		headercmd.patch \
-+		&&
-+	! grep "^X-Debbugs-CC: dummy@example.com" msgtxt1
-+'
-+
-+test_expect_success $PREREQ 'multiline fields are correctly unfolded' '
-+	clean_fake_sendmail &&
-+	cp $patches headercmd.patch &&
-+	write_script headercmd-multiline <<-\EOF &&
-+	echo "X-Debbugs-CC: someone@example.com
-+FoldedField: This is a tale
-+ best told using
-+ multiple lines."
-+	EOF
-+	git send-email \
-+		--from="Example <nobody@example.com>" \
-+		--to=nobody@example.com \
-+		--header-cmd=./headercmd-multiline \
-+		--smtp-server="$(pwd)/fake.sendmail" \
-+		headercmd.patch &&
-+	grep "^FoldedField: This is a tale best told using multiple lines.$" msgtxt1
-+'
-+
-+# Blank lines in the middle of the output of a command are invalid.
-+test_expect_success $PREREQ 'malform output reported on blank lines in command output' '
-+	clean_fake_sendmail &&
-+	cp $patches headercmd.patch &&
-+	write_script headercmd-malformed-output <<-\EOF &&
-+	echo "X-Debbugs-CC: someone@example.com
-+
-+SomeOtherField: someone-else@example.com"
-+	EOF
-+	! git send-email \
-+		--from="Example <nobody@example.com>" \
-+		--to=nobody@example.com \
-+		--header-cmd=./headercmd-malformed-output \
-+		--smtp-server="$(pwd)/fake.sendmail" \
-+		headercmd.patch
-+'
-+
- test_expect_success $PREREQ 'reject long lines' '
- 	z8=zzzzzzzz &&
- 	z64=$z8$z8$z8$z8$z8$z8$z8$z8 &&
diff --git a/gnu/packages/version-control.scm b/gnu/packages/version-control.scm
index 40b9e124d2..468a83fe4a 100644
--- a/gnu/packages/version-control.scm
+++ b/gnu/packages/version-control.scm
@@ -227,15 +227,14 @@ Python 3.3 and later, rather than on Python 2.")
 (define-public git
   (package
    (name "git")
-   (version "2.40.1")
+   (version "2.41.0")
    (source (origin
             (method url-fetch)
             (uri (string-append "mirror://kernel.org/software/scm/git/git-"
                                 version ".tar.xz"))
             (sha256
              (base32
-              "1li1xwgiwccy88bkshsah2kzl1006jg29jp7n32gvjggiswvi4s8"))
-            (patches (search-patches "git-header-cmd.patch"))))
+              "0h40arw08xbpi2cbf7pvc947v963rjxz3inb2ar81zjc8byvlj77"))))
    (build-system gnu-build-system)
    (native-inputs
     `(("native-perl" ,perl)
@@ -255,7 +254,7 @@ Python 3.3 and later, rather than on Python 2.")
                 version ".tar.xz"))
           (sha256
            (base32
-            "04yy5za8963q6xzrirflvxbi1216jzqj8ssvgd9nkld3ifa9q1gy"))))
+            "0xsqakgy0s60zpa13ilj6zj420kdh8pf4v3nrp1nziwj8ja4qymw"))))
       ;; For subtree documentation.
       ("asciidoc" ,asciidoc)
       ("docbook2x" ,docbook2x)