aboutsummaryrefslogtreecommitdiff


 
                         
generated by
                             
                                 cgit
                             
                         

                        
 


/th>Commit message (Expand)Author
2022-05-18services: Add more description fields....* gnu/services.scm (simple-service): Add 'description' field.
* gnu/services/base.scm (udev-rules-service): Likewise.
* gnu/system/install.scm (configuration-template-service-type): Likewise.
* gnu/tests.scm (marionette-service-type): Likewise.
Ludovic Courtès
2021-12-12services: Define '%loopback-static-networking'....* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
Ludovic Courtès
2021-12-12services: static-networking: Change interface to mimic netlink....* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate.  Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface.  Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
Ludovic Courtès
2021-08-29Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new
'targets' one instead.

* doc/guix-cookbook.texi<target>: Replace by 'targets'.
* gnu/bootloader/grub.scm: Likewise.
* gnu/installer/parted.scm: Likewise.
* gnu/machine/digital-ocean.scm: Likewise.
* gnu/system/examples/asus-c201.tmpl: Likewise
* gnu/system/examples/bare-bones.tmpl: Likewise
* gnu/system/examples/bare-hurd.tmpl: Likewise
* gnu/system/examples/beaglebone-black.tmpl: Likewise
* gnu/system/examples/desktop.tmpl: Likewise
* gnu/system/examples/docker-image.tmpl: Likewise
* gnu/system/examples/lightweight-desktop.tmpl: Likewise
* gnu/system/examples/vm-image.tmpl: Likewise
* gnu/system/examples/yggdrasil.tmpl: Likewise
* gnu/system/hurd.scm: Likewise
* gnu/system/images/hurd.scm: Likewise
* gnu/system/images/novena.scm: Likewise
* gnu/system/images/pine64.scm: Likewise
* gnu/system/images/pinebook-pro.scm: Likewise
* gnu/system/images/rock64.scm: Likewise
* gnu/system/install.scm: Likewise
* gnu/system/vm.scm: Likewise
* gnu/tests.scm: Likewise
* gnu/tests/ganeti.scm: Likewise
* gnu/tests/install.scm: Likewise
* gnu/tests/nfs.scm: Likewise
* gnu/tests/telephony.scm: Likewise
* tests/boot-parameters.scm: Likewise
* tests/system.scm: Likewise
Maxim Cournoyer
2021-08-12system: install, hurd: Use 'setuid-programs'....This is a followup to a7ac19851baab3fbcc40c4b2cf5b00a6ac9cd2f3.

* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
Ludovic Courtès
2021-01-13services: shepherd: 'shepherd-service-type' requires documentation....* gnu/services/shepherd.scm (shepherd-service-type): Require a
'description' form.
* gnu/services/base.scm (root-file-system-service-type)
(rngd-service-type, host-name-service-type):
(virtual-terminal-service-type, console-keymap-service-type)
(syslog-service-type, swap-service-type)
(kmscon-service-type): Add description.
* gnu/services/networking.scm (dhcp-client-service-type): Likewise.
* gnu/system/install.scm (cow-store-service-type): Likewise.
* gnu/system/linux-container.scm (dummy-networking-service-type):
Likewise.
* gnu/system/mapped-devices.scm (device-mapping-service-type):
Likewise.
* tests/guix-system.sh: Likewise.
Ludovic Courtès
2020-12-15store-copy: 'populate-store' can optionally deduplicate files....Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.

* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'.  Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
 #:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure.  Pass it to 'source-module-closure'.
Ludovic Courtès
2020-12-11install: Discover local substitute servers....* gnu/installer/substitutes.scm: New file.
* gnu/installer/newt/substitutes.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* po/guix/POTFILES.in: Add gnu/installer/newt/substitutes.scm.
* gnu/installer/proxy.scm (with-silent-shepherd): Move to ...
* gnu/installer/utils.scm: ... here.
* gnu/installer/record.scm (<installer>)[substitutes-page]: New field.
* gnu/installer/newt.scm (substitutes-page): New procedure,
(newt-installer): register it.
* gnu/installer.scm (installer-steps): Add "substitutes-page" step.
* gnu/system/install.scm (%installation-services): Add avahi-service-type and
enable substitute server discover in guix-service-type.
[<name-service-switch>]: Set it to %mdns-host-lookup-nss.
Mathieu Othacehe
2020-10-15install: Deduplicate packages with %base-package sets....* gnu/system.scm (%base-packages-interactive): Add nvi.
* gnu/system/install.scm (installation-os)[packages]: Remove parted,
gptfdisk, ddrescue, cryptsetup, mdadm, dosfstools, btrfs-progs,
f2fs-tools, jfstools, openssh, wireless-tools, iw,
wpa-supplicant-minimal, iproute, bash-completion, nvi. Add
%base-packages-disk-utilities.
Efraim Flashner
2020-10-11Revert "Revert "install: Pass "modprobe.blacklist=radeon".""...This reverts commit 73ddcab6075f60ef9b3cd72a35fbf7f5d622b6ef.
Blacklisting has become necessary again on my AMD machines, else
the installer screen stays black.
Florian Pelz
2020-09-02install: Factorize cow-store procedure....Move the cow-store procedure from the service declaration in (gnu system
install) to (gnu build install), so that it can be called from within a
different context than Shepherd.

* gnu/build/install.scm (mount-cow-store, unmount-cow-store): New procedures.
* gnu/system/install.scm (make-cow-store): Remove it,
(cow-store-service-type): adapt it accordingly.
Mathieu Othacehe
2020-07-31file-system: Add efivarfs support....Tools such as efibootmgr rely on the deprecated /sys/firmware/efi/vars API as
well as on the new /sys/firmware/efi/efivars API. The latter needs to be
mounted.

Reported by Keyhenge here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00274.html

Here is the efivarfs documentation:
https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt.

* gnu/system/file-systems.scm (%efivars-file-system): New exported variable,
(%base-file-systems): add it.
* gnu/system/install.scm (%efivars-file-system): Add it.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Mathieu Othacehe
2020-06-08system: install: Add default libcs to gc-roots....During the installation, it may be needed to build locales that are not
covered by glibc-utf8-locales. Make sure that the libraries required to build
locales are available.

This is a follow-up of 0eed77127592323d89f56c215a15374a1aaae110.

* gnu/system/install.scm (installation-os)[services]: Add
%default-locale-libcs to gc-root-service-type.
Mathieu Othacehe
2020-05-05Merge branch 'master' into core-updatesMarius Bakke
2020-05-03install: Add f2fs-tools to the installation image....* gnu/system/install.scm (installation-os)[packages]: Add f2fs-tools.
Danny Milosavljevic
2020-05-02Merge branch 'master' into core-updatesMarius Bakke
2020-05-01Revert "install: Pass "modprobe.blacklist=radeon"."...This reverts commit 785919121066a10b291d783b6903b5e368e992a8, which is no longer
needed since uvesafb was added in 557e6820a77b24f8f3f03f28ee473137b1caeb64.
Florian Pelz
2020-04-23Merge branch 'master' into core-updates... Conflicts:
	etc/news.scm
	gnu/local.mk
	gnu/packages/bootloaders.scm
	gnu/packages/linphone.scm
	gnu/packages/linux.scm
	gnu/packages/tls.scm
	gnu/system.scm
Marius Bakke
2020-04-20installer: Rename uvesafb shepherd service to maybe-uvesafb....Because the installer's uvesafb service loads uvesafb only on some machines.

This is a follow-up to commit 0ad60b2a89d6d387236466e0bcdd61ac489fca37.

* gnu/system/install.scm (uvesafb-shepherd-service): Adjust provision and
description fields.
Florian Pelz
2020-04-19installer: Add GC root for Guile 3.0....* gnu/system/install.scm (%installation-services)[gc-root-service-type]: Add
GC root for GUILE-3.0 instead of GUILE-2.2.
Marius Bakke
2020-04-15Merge branch 'master' into core-updatesMarius Bakke
2020-04-14installer: Only load uvesafb kernel module when needed....This is a follow-up to commit 557e6820a77b24f8f3f03f28ee473137b1caeb64.

* gnu/system/install.scm (uvesafb-shepherd-service): Check
that /dev/fb0 is not already present.
Florian Pelz
2020-04-11installer: Load uvesafb kernel module....Fixes <https://bugs.gnu.org/40538>.

Machines without Kernel Mode Setting (those with many old and current AMD
GPUs, SiS GPUs, …) need uvesafb to show the GUI installer.  Some may also need
a kernel parameter like nomodeset or vga=793, but we leave that for the user
to specify in GRUB.

* gnu/system/install.scm (uvesafb-shepherd-service): New procedure.
(uvesafb-service-type): New variable.
(%installation-services): Add it.

Co-authored-by: Ludovic Courtès <ludo@gnu.org>
Florian Pelz