From aa4d426b4d3527d7e166df1a05058c9a4a0f6683 Mon Sep 17 00:00:00 2001 From: Wojtek Kosior Date: Fri, 30 Apr 2021 00:33:56 +0200 Subject: initial/final commit --- openssl-1.1.0h/ssl/record/record.h | 243 +++++++++++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 openssl-1.1.0h/ssl/record/record.h (limited to 'openssl-1.1.0h/ssl/record/record.h') diff --git a/openssl-1.1.0h/ssl/record/record.h b/openssl-1.1.0h/ssl/record/record.h new file mode 100644 index 0000000..9bb2431 --- /dev/null +++ b/openssl-1.1.0h/ssl/record/record.h @@ -0,0 +1,243 @@ +/* + * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. + * + * Licensed under the OpenSSL license (the "License"). You may not use + * this file except in compliance with the License. You can obtain a copy + * in the file LICENSE in the source distribution or at + * https://www.openssl.org/source/license.html + */ + +/***************************************************************************** + * * + * These structures should be considered PRIVATE to the record layer. No * + * non-record layer code should be using these structures in any way. * + * * + *****************************************************************************/ + +typedef struct ssl3_buffer_st { + /* at least SSL3_RT_MAX_PACKET_SIZE bytes, see ssl3_setup_buffers() */ + unsigned char *buf; + /* default buffer size (or 0 if no default set) */ + size_t default_len; + /* buffer size */ + size_t len; + /* where to 'copy from' */ + int offset; + /* how many bytes left */ + int left; +} SSL3_BUFFER; + +#define SEQ_NUM_SIZE 8 + +typedef struct ssl3_record_st { + /* Record layer version */ + /* r */ + int rec_version; + /* type of record */ + /* r */ + int type; + /* How many bytes available */ + /* rw */ + unsigned int length; + /* + * How many bytes were available before padding was removed? This is used + * to implement the MAC check in constant time for CBC records. + */ + /* rw */ + unsigned int orig_len; + /* read/write offset into 'buf' */ + /* r */ + unsigned int off; + /* pointer to the record data */ + /* rw */ + unsigned char *data; + /* where the decode bytes are */ + /* rw */ + unsigned char *input; + /* only used with decompression - malloc()ed */ + /* r */ + unsigned char *comp; + /* Whether the data from this record has already been read or not */ + /* r */ + unsigned int read; + /* epoch number, needed by DTLS1 */ + /* r */ + unsigned long epoch; + /* sequence number, needed by DTLS1 */ + /* r */ + unsigned char seq_num[SEQ_NUM_SIZE]; +} SSL3_RECORD; + +typedef struct dtls1_bitmap_st { + /* Track 32 packets on 32-bit systems and 64 - on 64-bit systems */ + unsigned long map; + /* Max record number seen so far, 64-bit value in big-endian encoding */ + unsigned char max_seq_num[SEQ_NUM_SIZE]; +} DTLS1_BITMAP; + +typedef struct record_pqueue_st { + unsigned short epoch; + struct pqueue_st *q; +} record_pqueue; + +typedef struct dtls1_record_data_st { + unsigned char *packet; + unsigned int packet_length; + SSL3_BUFFER rbuf; + SSL3_RECORD rrec; +#ifndef OPENSSL_NO_SCTP + struct bio_dgram_sctp_rcvinfo recordinfo; +#endif +} DTLS1_RECORD_DATA; + +typedef struct dtls_record_layer_st { + /* + * The current data and handshake epoch. This is initially + * undefined, and starts at zero once the initial handshake is + * completed + */ + unsigned short r_epoch; + unsigned short w_epoch; + /* records being received in the current epoch */ + DTLS1_BITMAP bitmap; + /* renegotiation starts a new set of sequence numbers */ + DTLS1_BITMAP next_bitmap; + /* Received handshake records (processed and unprocessed) */ + record_pqueue unprocessed_rcds; + record_pqueue processed_rcds; + /* + * Buffered application records. Only for records between CCS and + * Finished to prevent either protocol violation or unnecessary message + * loss. + */ + record_pqueue buffered_app_data; + /* + * storage for Alert/Handshake protocol data received but not yet + * processed by ssl3_read_bytes: + */ + unsigned char alert_fragment[DTLS1_AL_HEADER_LENGTH]; + unsigned int alert_fragment_len; + unsigned char handshake_fragment[DTLS1_HM_HEADER_LENGTH]; + unsigned int handshake_fragment_len; + /* save last and current sequence numbers for retransmissions */ + unsigned char last_write_sequence[8]; + unsigned char curr_write_sequence[8]; +} DTLS_RECORD_LAYER; + +/***************************************************************************** + * * + * This structure should be considered "opaque" to anything outside of the * + * record layer. No non-record layer code should be accessing the members of * + * this structure. * + * * + *****************************************************************************/ + +typedef struct record_layer_st { + /* The parent SSL structure */ + SSL *s; + /* + * Read as many input bytes as possible (for + * non-blocking reads) + */ + int read_ahead; + /* where we are when reading */ + int rstate; + /* How many pipelines can be used to read data */ + unsigned int numrpipes; + /* How many pipelines can be used to write data */ + unsigned int numwpipes; + /* read IO goes into here */ + SSL3_BUFFER rbuf; + /* write IO goes into here */ + SSL3_BUFFER wbuf[SSL_MAX_PIPELINES]; + /* each decoded record goes in here */ + SSL3_RECORD rrec[SSL_MAX_PIPELINES]; + /* used internally to point at a raw packet */ + unsigned char *packet; + unsigned int packet_length; + /* number of bytes sent so far */ + unsigned int wnum; + /* + * storage for Alert/Handshake protocol data received but not yet + * processed by ssl3_read_bytes: + */ + unsigned char alert_fragment[2]; + unsigned int alert_fragment_len; + unsigned char handshake_fragment[4]; + unsigned int handshake_fragment_len; + /* The number of consecutive empty records we have received */ + unsigned int empty_record_count; + /* partial write - check the numbers match */ + /* number bytes written */ + int wpend_tot; + int wpend_type; + /* number of bytes submitted */ + int wpend_ret; + const unsigned char *wpend_buf; + unsigned char read_sequence[SEQ_NUM_SIZE]; + unsigned char write_sequence[SEQ_NUM_SIZE]; + /* Set to true if this is the first record in a connection */ + unsigned int is_first_record; + /* Count of the number of consecutive warning alerts received */ + unsigned int alert_count; + DTLS_RECORD_LAYER *d; +} RECORD_LAYER; + +/***************************************************************************** + * * + * The following macros/functions represent the libssl internal API to the * + * record layer. Any libssl code may call these functions/macros * + * * + *****************************************************************************/ + +#define MIN_SSL2_RECORD_LEN 9 + +#define RECORD_LAYER_set_read_ahead(rl, ra) ((rl)->read_ahead = (ra)) +#define RECORD_LAYER_get_read_ahead(rl) ((rl)->read_ahead) +#define RECORD_LAYER_get_packet(rl) ((rl)->packet) +#define RECORD_LAYER_get_packet_length(rl) ((rl)->packet_length) +#define RECORD_LAYER_add_packet_length(rl, inc) ((rl)->packet_length += (inc)) +#define DTLS_RECORD_LAYER_get_w_epoch(rl) ((rl)->d->w_epoch) +#define DTLS_RECORD_LAYER_get_processed_rcds(rl) \ + ((rl)->d->processed_rcds) +#define DTLS_RECORD_LAYER_get_unprocessed_rcds(rl) \ + ((rl)->d->unprocessed_rcds) + +void RECORD_LAYER_init(RECORD_LAYER *rl, SSL *s); +void RECORD_LAYER_clear(RECORD_LAYER *rl); +void RECORD_LAYER_release(RECORD_LAYER *rl); +int RECORD_LAYER_read_pending(const RECORD_LAYER *rl); +int RECORD_LAYER_processed_read_pending(const RECORD_LAYER *rl); +int RECORD_LAYER_write_pending(const RECORD_LAYER *rl); +int RECORD_LAYER_set_data(RECORD_LAYER *rl, const unsigned char *buf, int len); +void RECORD_LAYER_reset_read_sequence(RECORD_LAYER *rl); +void RECORD_LAYER_reset_write_sequence(RECORD_LAYER *rl); +int RECORD_LAYER_is_sslv2_record(RECORD_LAYER *rl); +unsigned int RECORD_LAYER_get_rrec_length(RECORD_LAYER *rl); +__owur int ssl3_pending(const SSL *s); +__owur int ssl3_write_bytes(SSL *s, int type, const void *buf, int len); +__owur int do_ssl3_write(SSL *s, int type, const unsigned char *buf, + unsigned int *pipelens, unsigned int numpipes, + int create_empty_fragment); +__owur int ssl3_read_bytes(SSL *s, int type, int *recvd_type, + unsigned char *buf, int len, int peek); +__owur int ssl3_setup_buffers(SSL *s); +__owur int ssl3_enc(SSL *s, SSL3_RECORD *inrecs, unsigned int n_recs, int send); +__owur int n_ssl3_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send); +__owur int ssl3_write_pending(SSL *s, int type, const unsigned char *buf, + unsigned int len); +__owur int tls1_enc(SSL *s, SSL3_RECORD *recs, unsigned int n_recs, int send); +__owur int tls1_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send); +int DTLS_RECORD_LAYER_new(RECORD_LAYER *rl); +void DTLS_RECORD_LAYER_free(RECORD_LAYER *rl); +void DTLS_RECORD_LAYER_clear(RECORD_LAYER *rl); +void DTLS_RECORD_LAYER_set_saved_w_epoch(RECORD_LAYER *rl, unsigned short e); +void DTLS_RECORD_LAYER_clear(RECORD_LAYER *rl); +void DTLS_RECORD_LAYER_resync_write(RECORD_LAYER *rl); +void DTLS_RECORD_LAYER_set_write_sequence(RECORD_LAYER *rl, unsigned char *seq); +__owur int dtls1_read_bytes(SSL *s, int type, int *recvd_type, + unsigned char *buf, int len, int peek); +__owur int dtls1_write_bytes(SSL *s, int type, const void *buf, int len); +__owur int do_dtls1_write(SSL *s, int type, const unsigned char *buf, + unsigned int len, int create_empty_fragement); +void dtls1_reset_seq_numbers(SSL *s, int rw); -- cgit v1.2.3