From aa4d426b4d3527d7e166df1a05058c9a4a0f6683 Mon Sep 17 00:00:00 2001 From: Wojtek Kosior Date: Fri, 30 Apr 2021 00:33:56 +0200 Subject: initial/final commit --- openssl-1.1.0h/doc/ssl/SSL_CONF_cmd.pod | 563 ++++++++++++++++++++++++++++++++ 1 file changed, 563 insertions(+) create mode 100644 openssl-1.1.0h/doc/ssl/SSL_CONF_cmd.pod (limited to 'openssl-1.1.0h/doc/ssl/SSL_CONF_cmd.pod') diff --git a/openssl-1.1.0h/doc/ssl/SSL_CONF_cmd.pod b/openssl-1.1.0h/doc/ssl/SSL_CONF_cmd.pod new file mode 100644 index 0000000..a28e218 --- /dev/null +++ b/openssl-1.1.0h/doc/ssl/SSL_CONF_cmd.pod @@ -0,0 +1,563 @@ +=pod + +=head1 NAME + +SSL_CONF_cmd_value_type, SSL_CONF_finish, +SSL_CONF_cmd - send configuration command + +=head1 SYNOPSIS + + #include + + int SSL_CONF_cmd(SSL_CONF_CTX *cctx, const char *cmd, const char *value); + int SSL_CONF_cmd_value_type(SSL_CONF_CTX *cctx, const char *cmd); + int SSL_CONF_finish(SSL_CONF_CTX *cctx); + +=head1 DESCRIPTION + +The function SSL_CONF_cmd() performs configuration operation B with +optional parameter B on B. Its purpose is to simplify application +configuration of B or B structures by providing a common +framework for command line options or configuration files. + +SSL_CONF_cmd_value_type() returns the type of value that B refers to. + +The function SSL_CONF_finish() must be called after all configuration +operations have been completed. It is used to finalise any operations +or to process defaults. + +=head1 SUPPORTED COMMAND LINE COMMANDS + +Currently supported B names for command lines (i.e. when the +flag B is set) are listed below. Note: all B names +are case sensitive. Unless otherwise stated commands can be used by +both clients and servers and the B parameter is not used. The default +prefix for command line commands is B<-> and that is reflected below. + +=over 4 + +=item B<-sigalgs> + +This sets the supported signature algorithms for TLS v1.2. For clients this +value is used directly for the supported signature algorithms extension. For +servers it is used to determine which signature algorithms to support. + +The B argument should be a colon separated list of signature algorithms +in order of decreasing preference of the form B. B +is one of B, B or B and B is a supported algorithm +OID short name such as B, B, B, B of B. +Note: algorithm and hash names are case sensitive. + +If this option is not set then all signature algorithms supported by the +OpenSSL library are permissible. + +=item B<-client_sigalgs> + +This sets the supported signature algorithms associated with client +authentication for TLS v1.2. For servers the value is used in the supported +signature algorithms field of a certificate request. For clients it is +used to determine which signature algorithm to with the client certificate. +If a server does not request a certificate this option has no effect. + +The syntax of B is identical to B<-sigalgs>. If not set then +the value set for B<-sigalgs> will be used instead. + +=item B<-curves> + +This sets the supported elliptic curves. For clients the curves are +sent using the supported curves extension. For servers it is used +to determine which curve to use. This setting affects curves used for both +signatures and key exchange, if applicable. + +The B argument is a colon separated list of curves. The curve can be +either the B name (e.g. B) or an OpenSSL OID name (e.g +B). Curve names are case sensitive. + +=item B<-named_curve> + +This sets the temporary curve used for ephemeral ECDH modes. Only used by +servers + +The B argument is a curve name or the special value B which +picks an appropriate curve based on client and server preferences. The curve +can be either the B name (e.g. B) or an OpenSSL OID name +(e.g B). Curve names are case sensitive. + +=item B<-cipher> + +Sets the cipher suite list to B. Note: syntax checking of B is +currently not performed unless a B or B structure is +associated with B. + +=item B<-cert> + +Attempts to use the file B as the certificate for the appropriate +context. It currently uses SSL_CTX_use_certificate_chain_file() if an B +structure is set or SSL_use_certificate_file() with filetype PEM if an B +structure is set. This option is only supported if certificate operations +are permitted. + +=item B<-key> + +Attempts to use the file B as the private key for the appropriate +context. This option is only supported if certificate operations +are permitted. Note: if no B<-key> option is set then a private key is +not loaded unless the flag B is set. + +=item B<-dhparam> + +Attempts to use the file B as the set of temporary DH parameters for +the appropriate context. This option is only supported if certificate +operations are permitted. + +=item B<-no_renegotiation> + +Disables all attempts at renegotiation in TLSv1.2 and earlier, same as setting +B. + +=item B<-min_protocol>, B<-max_protocol> + +Sets the minimum and maximum supported protocol. +Currently supported protocol values are B, B, +B, B for TLS and B, B for DTLS, +and B for no limit. +If the either bound is not specified then only the other bound applies, +if specified. +To restrict the supported protocol versions use these commands rather +than the deprecated alternative commands below. + +=item B<-no_ssl3>, B<-no_tls1>, B<-no_tls1_1>, B<-no_tls1_2> + +Disables protocol support for SSLv3, TLSv1.0, TLSv1.1 or TLSv1.2 by setting the +corresponding options B, B, B +and B respectively. +These options are deprecated, instead use B<-min_protocol> and B<-max_protocol>. + +=item B<-bugs> + +Various bug workarounds are set, same as setting B. + +=item B<-comp> + +Enables support for SSL/TLS compression, same as clearing +B. +This command was introduced in OpenSSL 1.1.0. +As of OpenSSL 1.1.0, compression is off by default. + +=item B<-no_comp> + +Disables support for SSL/TLS compression, same as setting +B. +As of OpenSSL 1.1.0, compression is off by default. + +=item B<-no_ticket> + +Disables support for session tickets, same as setting B. + +=item B<-serverpref> + +Use server and not client preference order when determining which cipher suite, +signature algorithm or elliptic curve to use for an incoming connection. +Equivalent to B. Only used by servers. + +=item B<-no_resumption_on_reneg> + +set SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION flag. Only used by servers. + +=item B<-legacyrenegotiation> + +permits the use of unsafe legacy renegotiation. Equivalent to setting +B. + +=item B<-legacy_server_connect>, B<-no_legacy_server_connect> + +permits or prohibits the use of unsafe legacy renegotiation for OpenSSL +clients only. Equivalent to setting or clearing B. +Set by default. + +=item B<-strict> + +enables strict mode protocol handling. Equivalent to setting +B. + +=back + +=head1 SUPPORTED CONFIGURATION FILE COMMANDS + +Currently supported B names for configuration files (i.e. when the +flag B is set) are listed below. All configuration file +B names are case insensitive so B is recognised +as well as B. Unless otherwise stated the B names +are also case insensitive. + +Note: the command prefix (if set) alters the recognised B values. + +=over 4 + +=item B + +Sets the cipher suite list to B. Note: syntax checking of B is +currently not performed unless an B or B structure is +associated with B. + +=item B + +Attempts to use the file B as the certificate for the appropriate +context. It currently uses SSL_CTX_use_certificate_chain_file() if an B +structure is set or SSL_use_certificate_file() with filetype PEM if an B +structure is set. This option is only supported if certificate operations +are permitted. + +=item B + +Attempts to use the file B as the private key for the appropriate +context. This option is only supported if certificate operations +are permitted. Note: if no B option is set then a private key is +not loaded unless the B is set. + +=item B, B, B, B + +These options indicate a file or directory used for building certificate +chains or verifying certificate chains. These options are only supported +if certificate operations are permitted. + +=item B + +Attempts to use the file B in the "serverinfo" extension using the +function SSL_CTX_use_serverinfo_file. + +=item B + +Attempts to use the file B as the set of temporary DH parameters for +the appropriate context. This option is only supported if certificate +operations are permitted. + +=item B + +Disables all attempts at renegotiation in TLSv1.2 and earlier, same as setting +B. + +=item B + +This sets the supported signature algorithms for TLS v1.2. For clients this +value is used directly for the supported signature algorithms extension. For +servers it is used to determine which signature algorithms to support. + +The B argument should be a colon separated list of signature algorithms +in order of decreasing preference of the form B. B +is one of B, B or B and B is a supported algorithm +OID short name such as B, B, B, B of B. +Note: algorithm and hash names are case sensitive. + +If this option is not set then all signature algorithms supported by the +OpenSSL library are permissible. + +=item B + +This sets the supported signature algorithms associated with client +authentication for TLS v1.2. For servers the value is used in the supported +signature algorithms field of a certificate request. For clients it is +used to determine which signature algorithm to with the client certificate. + +The syntax of B is identical to B. If not set then +the value set for B will be used instead. + +=item B + +This sets the supported elliptic curves. For clients the curves are +sent using the supported curves extension. For servers it is used +to determine which curve to use. This setting affects curves used for both +signatures and key exchange, if applicable. + +The B argument is a colon separated list of curves. The curve can be +either the B name (e.g. B) or an OpenSSL OID name (e.g +B). Curve names are case sensitive. + +=item B + +This sets the minimum supported SSL, TLS or DTLS version. + +Currently supported protocol values are B, B, B, +B, B and B. +The value B will disable the limit. + +=item B + +This sets the maximum supported SSL, TLS or DTLS version. + +Currently supported protocol values are B, B, B, +B, B and B. +The value B will disable the limit. + +=item B + +This can be used to enable or disable certain versions of the SSL, +TLS or DTLS protocol. + +The B argument is a comma separated list of supported protocols +to enable or disable. +If a protocol is preceded by B<-> that version is disabled. + +All protocol versions are enabled by default. +You need to disable at least one protocol version for this setting have any +effect. +Only enabling some protocol versions does not disable the other protocol +versions. + +Currently supported protocol values are B, B, B, +B, B and B. +The special value B refers to all supported versions. + +This can't enable protocols that are disabled using B +or B, but can disable protocols that are still allowed +by them. + +The B command is fragile and deprecated; do not use it. +Use B and B instead. +If you do use B, make sure that the resulting range of enabled +protocols has no "holes", e.g. if TLS 1.0 and TLS 1.2 are both enabled, make +sure to also leave TLS 1.1 enabled. + +=item B + +The B argument is a comma separated list of various flags to set. +If a flag string is preceded B<-> it is disabled. +See the L function for more details of +individual options. + +Each option is listed below. Where an operation is enabled by default +the B<-flag> syntax is needed to disable it. + +B: session ticket support, enabled by default. Inverse of +B: that is B<-SessionTicket> is the same as setting +B. + +B: SSL/TLS compression support, enabled by default. Inverse +of B. + +B: use empty fragments as a countermeasure against a +SSL 3.0/TLS 1.0 protocol vulnerability affecting CBC ciphers. It +is set by default. Inverse of B. + +B: enable various bug workarounds. Same as B. + +B: enable single use DH keys, set by default. Inverse of +B. Only used by servers. + +B enable single use ECDH keys, set by default. Inverse of +B. Only used by servers. + +B use server and not client preference order when +determining which cipher suite, signature algorithm or elliptic curve +to use for an incoming connection. Equivalent to +B. Only used by servers. + +B set +B flag. Only used by servers. + +B permits the use of unsafe legacy renegotiation. +Equivalent to B. + +B permits the use of unsafe legacy renegotiation +for OpenSSL clients only. Equivalent to B. +Set by default. + +=item B + +The B argument is a comma separated list of flags to set. + +B enables peer verification: for clients only. + +B requests but does not require a certificate from the client. +Servers only. + +B requests and requires a certificate from the client: an error +occurs if the client does not present a certificate. Servers only. + +B requests a certificate from a client only on the initial connection: +not when renegotiating. Servers only. + +=item B, B + +A file or directory of certificates in PEM format whose names are used as the +set of acceptable names for client CAs. Servers only. This option is only +supported if certificate operations are permitted. + +=back + +=head1 SUPPORTED COMMAND TYPES + +The function SSL_CONF_cmd_value_type() currently returns one of the following +types: + +=over 4 + +=item B + +The B string is unrecognised, this return value can be use to flag +syntax errors. + +=item B + +The value is a string without any specific structure. + +=item B + +The value is a file name. + +=item B + +The value is a directory name. + +=item B + +The value string is not used e.g. a command line option which doesn't take an +argument. + +=back + +=head1 NOTES + +The order of operations is significant. This can be used to set either defaults +or values which cannot be overridden. For example if an application calls: + + SSL_CONF_cmd(ctx, "Protocol", "-SSLv3"); + SSL_CONF_cmd(ctx, userparam, uservalue); + +it will disable SSLv3 support by default but the user can override it. If +however the call sequence is: + + SSL_CONF_cmd(ctx, userparam, uservalue); + SSL_CONF_cmd(ctx, "Protocol", "-SSLv3"); + +SSLv3 is B disabled and attempt to override this by the user are +ignored. + +By checking the return code of SSL_CTX_cmd() it is possible to query if a +given B is recognised, this is useful if SSL_CTX_cmd() values are +mixed with additional application specific operations. + +For example an application might call SSL_CTX_cmd() and if it returns +-2 (unrecognised command) continue with processing of application specific +commands. + +Applications can also use SSL_CTX_cmd() to process command lines though the +utility function SSL_CTX_cmd_argv() is normally used instead. One way +to do this is to set the prefix to an appropriate value using +SSL_CONF_CTX_set1_prefix(), pass the current argument to B and the +following argument to B (which may be NULL). + +In this case if the return value is positive then it is used to skip that +number of arguments as they have been processed by SSL_CTX_cmd(). If -2 is +returned then B is not recognised and application specific arguments +can be checked instead. If -3 is returned a required argument is missing +and an error is indicated. If 0 is returned some other error occurred and +this can be reported back to the user. + +The function SSL_CONF_cmd_value_type() can be used by applications to +check for the existence of a command or to perform additional syntax +checking or translation of the command value. For example if the return +value is B an application could translate a relative +pathname to an absolute pathname. + +=head1 EXAMPLES + +Set supported signature algorithms: + + SSL_CONF_cmd(ctx, "SignatureAlgorithms", "ECDSA+SHA256:RSA+SHA256:DSA+SHA256"); + +There are various ways to select the supported protocols. + +This set the minimum protocol version to TLSv1, and so disables SSLv3. +This is the recommended way to disable protocols. + + SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1"); + +The following also disables SSLv3: + + SSL_CONF_cmd(ctx, "Protocol", "-SSLv3"); + +The following will first enable all protocols, and then disable +SSLv3. +If no protocol versions were disabled before this has the same effect as +"-SSLv3", but if some versions were disables this will re-enable them before +disabling SSLv3. + + SSL_CONF_cmd(ctx, "Protocol", "ALL,-SSLv3"); + +Only enable TLSv1.2: + + SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1.2"); + SSL_CONF_cmd(ctx, "MaxProtocol", "TLSv1.2"); + +This also only enables TLSv1.2: + + SSL_CONF_cmd(ctx, "Protocol", "-ALL,TLSv1.2"); + +Disable TLS session tickets: + + SSL_CONF_cmd(ctx, "Options", "-SessionTicket"); + +Enable compression: + + SSL_CONF_cmd(ctx, "Options", "Compression"); + +Set supported curves to P-256, P-384: + + SSL_CONF_cmd(ctx, "Curves", "P-256:P-384"); + +Set automatic support for any elliptic curve for key exchange: + + SSL_CONF_cmd(ctx, "ECDHParameters", "Automatic"); + +=head1 RETURN VALUES + +SSL_CONF_cmd() returns 1 if the value of B is recognised and B is +B used and 2 if both B and B are used. In other words it +returns the number of arguments processed. This is useful when processing +command lines. + +A return value of -2 means B is not recognised. + +A return value of -3 means B is recognised and the command requires a +value but B is NULL. + +A return code of 0 indicates that both B and B are valid but an +error occurred attempting to perform the operation: for example due to an +error in the syntax of B in this case the error queue may provide +additional information. + +SSL_CONF_finish() returns 1 for success and 0 for failure. + +=head1 SEE ALSO + +L, +L, +L, +L, +L, +L + +=head1 HISTORY + +SSL_CONF_cmd() was first added to OpenSSL 1.0.2 + +B doesn't have effect since 1.1.0, but the macro is retained +for backwards compatibility. + +B was first added to OpenSSL 1.1.0. In earlier versions of +OpenSSL passing a command which didn't take an argument would return +B. + +B and B where added in OpenSSL 1.1.0. + +=head1 COPYRIGHT + +Copyright 2012-2018 The OpenSSL Project Authors. All Rights Reserved. + +Licensed under the OpenSSL license (the "License"). You may not use +this file except in compliance with the License. You can obtain a copy +in the file LICENSE in the source distribution or at +L. + +=cut -- cgit v1.2.3