From aa4d426b4d3527d7e166df1a05058c9a4a0f6683 Mon Sep 17 00:00:00 2001 From: Wojtek Kosior Date: Fri, 30 Apr 2021 00:33:56 +0200 Subject: initial/final commit --- openssl-1.1.0h/crypto/aes/asm/aesv8-armx.pl | 1008 +++++++++++++++++++++++++++ 1 file changed, 1008 insertions(+) create mode 100755 openssl-1.1.0h/crypto/aes/asm/aesv8-armx.pl (limited to 'openssl-1.1.0h/crypto/aes/asm/aesv8-armx.pl') diff --git a/openssl-1.1.0h/crypto/aes/asm/aesv8-armx.pl b/openssl-1.1.0h/crypto/aes/asm/aesv8-armx.pl new file mode 100755 index 0000000..1782d5b --- /dev/null +++ b/openssl-1.1.0h/crypto/aes/asm/aesv8-armx.pl @@ -0,0 +1,1008 @@ +#! /usr/bin/env perl +# Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved. +# +# Licensed under the OpenSSL license (the "License"). You may not use +# this file except in compliance with the License. You can obtain a copy +# in the file LICENSE in the source distribution or at +# https://www.openssl.org/source/license.html + +# +# ==================================================================== +# Written by Andy Polyakov for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# This module implements support for ARMv8 AES instructions. The +# module is endian-agnostic in sense that it supports both big- and +# little-endian cases. As does it support both 32- and 64-bit modes +# of operation. Latter is achieved by limiting amount of utilized +# registers to 16, which implies additional NEON load and integer +# instructions. This has no effect on mighty Apple A7, where results +# are literally equal to the theoretical estimates based on AES +# instruction latencies and issue rates. On Cortex-A53, an in-order +# execution core, this costs up to 10-15%, which is partially +# compensated by implementing dedicated code path for 128-bit +# CBC encrypt case. On Cortex-A57 parallelizable mode performance +# seems to be limited by sheer amount of NEON instructions... +# +# Performance in cycles per byte processed with 128-bit key: +# +# CBC enc CBC dec CTR +# Apple A7 2.39 1.20 1.20 +# Cortex-A53 1.32 1.29 1.46 +# Cortex-A57(*) 1.95 0.85 0.93 +# Denver 1.96 0.86 0.80 +# Mongoose 1.33 1.20 1.20 +# +# (*) original 3.64/1.34/1.32 results were for r0p0 revision +# and are still same even for updated module; + +$flavour = shift; +$output = shift; + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or +die "can't locate arm-xlate.pl"; + +open OUT,"| \"$^X\" $xlate $flavour $output"; +*STDOUT=*OUT; + +$prefix="aes_v8"; + +$code=<<___; +#include "arm_arch.h" + +#if __ARM_MAX_ARCH__>=7 +.text +___ +$code.=".arch armv8-a+crypto\n" if ($flavour =~ /64/); +$code.=<<___ if ($flavour !~ /64/); +.arch armv7-a // don't confuse not-so-latest binutils with argv8 :-) +.fpu neon +.code 32 +#undef __thumb2__ +___ + +# Assembler mnemonics are an eclectic mix of 32- and 64-bit syntax, +# NEON is mostly 32-bit mnemonics, integer - mostly 64. Goal is to +# maintain both 32- and 64-bit codes within single module and +# transliterate common code to either flavour with regex vodoo. +# +{{{ +my ($inp,$bits,$out,$ptr,$rounds)=("x0","w1","x2","x3","w12"); +my ($zero,$rcon,$mask,$in0,$in1,$tmp,$key)= + $flavour=~/64/? map("q$_",(0..6)) : map("q$_",(0..3,8..10)); + + +$code.=<<___; +.align 5 +.Lrcon: +.long 0x01,0x01,0x01,0x01 +.long 0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d // rotate-n-splat +.long 0x1b,0x1b,0x1b,0x1b + +.globl ${prefix}_set_encrypt_key +.type ${prefix}_set_encrypt_key,%function +.align 5 +${prefix}_set_encrypt_key: +.Lenc_key: +___ +$code.=<<___ if ($flavour =~ /64/); + stp x29,x30,[sp,#-16]! + add x29,sp,#0 +___ +$code.=<<___; + mov $ptr,#-1 + cmp $inp,#0 + b.eq .Lenc_key_abort + cmp $out,#0 + b.eq .Lenc_key_abort + mov $ptr,#-2 + cmp $bits,#128 + b.lt .Lenc_key_abort + cmp $bits,#256 + b.gt .Lenc_key_abort + tst $bits,#0x3f + b.ne .Lenc_key_abort + + adr $ptr,.Lrcon + cmp $bits,#192 + + veor $zero,$zero,$zero + vld1.8 {$in0},[$inp],#16 + mov $bits,#8 // reuse $bits + vld1.32 {$rcon,$mask},[$ptr],#32 + + b.lt .Loop128 + b.eq .L192 + b .L256 + +.align 4 +.Loop128: + vtbl.8 $key,{$in0},$mask + vext.8 $tmp,$zero,$in0,#12 + vst1.32 {$in0},[$out],#16 + aese $key,$zero + subs $bits,$bits,#1 + + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $key,$key,$rcon + veor $in0,$in0,$tmp + vshl.u8 $rcon,$rcon,#1 + veor $in0,$in0,$key + b.ne .Loop128 + + vld1.32 {$rcon},[$ptr] + + vtbl.8 $key,{$in0},$mask + vext.8 $tmp,$zero,$in0,#12 + vst1.32 {$in0},[$out],#16 + aese $key,$zero + + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $key,$key,$rcon + veor $in0,$in0,$tmp + vshl.u8 $rcon,$rcon,#1 + veor $in0,$in0,$key + + vtbl.8 $key,{$in0},$mask + vext.8 $tmp,$zero,$in0,#12 + vst1.32 {$in0},[$out],#16 + aese $key,$zero + + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $key,$key,$rcon + veor $in0,$in0,$tmp + veor $in0,$in0,$key + vst1.32 {$in0},[$out] + add $out,$out,#0x50 + + mov $rounds,#10 + b .Ldone + +.align 4 +.L192: + vld1.8 {$in1},[$inp],#8 + vmov.i8 $key,#8 // borrow $key + vst1.32 {$in0},[$out],#16 + vsub.i8 $mask,$mask,$key // adjust the mask + +.Loop192: + vtbl.8 $key,{$in1},$mask + vext.8 $tmp,$zero,$in0,#12 + vst1.32 {$in1},[$out],#8 + aese $key,$zero + subs $bits,$bits,#1 + + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in0,$in0,$tmp + + vdup.32 $tmp,${in0}[3] + veor $tmp,$tmp,$in1 + veor $key,$key,$rcon + vext.8 $in1,$zero,$in1,#12 + vshl.u8 $rcon,$rcon,#1 + veor $in1,$in1,$tmp + veor $in0,$in0,$key + veor $in1,$in1,$key + vst1.32 {$in0},[$out],#16 + b.ne .Loop192 + + mov $rounds,#12 + add $out,$out,#0x20 + b .Ldone + +.align 4 +.L256: + vld1.8 {$in1},[$inp] + mov $bits,#7 + mov $rounds,#14 + vst1.32 {$in0},[$out],#16 + +.Loop256: + vtbl.8 $key,{$in1},$mask + vext.8 $tmp,$zero,$in0,#12 + vst1.32 {$in1},[$out],#16 + aese $key,$zero + subs $bits,$bits,#1 + + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in0,$in0,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $key,$key,$rcon + veor $in0,$in0,$tmp + vshl.u8 $rcon,$rcon,#1 + veor $in0,$in0,$key + vst1.32 {$in0},[$out],#16 + b.eq .Ldone + + vdup.32 $key,${in0}[3] // just splat + vext.8 $tmp,$zero,$in1,#12 + aese $key,$zero + + veor $in1,$in1,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in1,$in1,$tmp + vext.8 $tmp,$zero,$tmp,#12 + veor $in1,$in1,$tmp + + veor $in1,$in1,$key + b .Loop256 + +.Ldone: + str $rounds,[$out] + mov $ptr,#0 + +.Lenc_key_abort: + mov x0,$ptr // return value + `"ldr x29,[sp],#16" if ($flavour =~ /64/)` + ret +.size ${prefix}_set_encrypt_key,.-${prefix}_set_encrypt_key + +.globl ${prefix}_set_decrypt_key +.type ${prefix}_set_decrypt_key,%function +.align 5 +${prefix}_set_decrypt_key: +___ +$code.=<<___ if ($flavour =~ /64/); + stp x29,x30,[sp,#-16]! + add x29,sp,#0 +___ +$code.=<<___ if ($flavour !~ /64/); + stmdb sp!,{r4,lr} +___ +$code.=<<___; + bl .Lenc_key + + cmp x0,#0 + b.ne .Ldec_key_abort + + sub $out,$out,#240 // restore original $out + mov x4,#-16 + add $inp,$out,x12,lsl#4 // end of key schedule + + vld1.32 {v0.16b},[$out] + vld1.32 {v1.16b},[$inp] + vst1.32 {v0.16b},[$inp],x4 + vst1.32 {v1.16b},[$out],#16 + +.Loop_imc: + vld1.32 {v0.16b},[$out] + vld1.32 {v1.16b},[$inp] + aesimc v0.16b,v0.16b + aesimc v1.16b,v1.16b + vst1.32 {v0.16b},[$inp],x4 + vst1.32 {v1.16b},[$out],#16 + cmp $inp,$out + b.hi .Loop_imc + + vld1.32 {v0.16b},[$out] + aesimc v0.16b,v0.16b + vst1.32 {v0.16b},[$inp] + + eor x0,x0,x0 // return value +.Ldec_key_abort: +___ +$code.=<<___ if ($flavour !~ /64/); + ldmia sp!,{r4,pc} +___ +$code.=<<___ if ($flavour =~ /64/); + ldp x29,x30,[sp],#16 + ret +___ +$code.=<<___; +.size ${prefix}_set_decrypt_key,.-${prefix}_set_decrypt_key +___ +}}} +{{{ +sub gen_block () { +my $dir = shift; +my ($e,$mc) = $dir eq "en" ? ("e","mc") : ("d","imc"); +my ($inp,$out,$key)=map("x$_",(0..2)); +my $rounds="w3"; +my ($rndkey0,$rndkey1,$inout)=map("q$_",(0..3)); + +$code.=<<___; +.globl ${prefix}_${dir}crypt +.type ${prefix}_${dir}crypt,%function +.align 5 +${prefix}_${dir}crypt: + ldr $rounds,[$key,#240] + vld1.32 {$rndkey0},[$key],#16 + vld1.8 {$inout},[$inp] + sub $rounds,$rounds,#2 + vld1.32 {$rndkey1},[$key],#16 + +.Loop_${dir}c: + aes$e $inout,$rndkey0 + aes$mc $inout,$inout + vld1.32 {$rndkey0},[$key],#16 + subs $rounds,$rounds,#2 + aes$e $inout,$rndkey1 + aes$mc $inout,$inout + vld1.32 {$rndkey1},[$key],#16 + b.gt .Loop_${dir}c + + aes$e $inout,$rndkey0 + aes$mc $inout,$inout + vld1.32 {$rndkey0},[$key] + aes$e $inout,$rndkey1 + veor $inout,$inout,$rndkey0 + + vst1.8 {$inout},[$out] + ret +.size ${prefix}_${dir}crypt,.-${prefix}_${dir}crypt +___ +} +&gen_block("en"); +&gen_block("de"); +}}} +{{{ +my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4)); my $enc="w5"; +my ($rounds,$cnt,$key_,$step,$step1)=($enc,"w6","x7","x8","x12"); +my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7)); + +my ($dat,$tmp,$rndzero_n_last)=($dat0,$tmp0,$tmp1); +my ($key4,$key5,$key6,$key7)=("x6","x12","x14",$key); + +### q8-q15 preloaded key schedule + +$code.=<<___; +.globl ${prefix}_cbc_encrypt +.type ${prefix}_cbc_encrypt,%function +.align 5 +${prefix}_cbc_encrypt: +___ +$code.=<<___ if ($flavour =~ /64/); + stp x29,x30,[sp,#-16]! + add x29,sp,#0 +___ +$code.=<<___ if ($flavour !~ /64/); + mov ip,sp + stmdb sp!,{r4-r8,lr} + vstmdb sp!,{d8-d15} @ ABI specification says so + ldmia ip,{r4-r5} @ load remaining args +___ +$code.=<<___; + subs $len,$len,#16 + mov $step,#16 + b.lo .Lcbc_abort + cclr $step,eq + + cmp $enc,#0 // en- or decrypting? + ldr $rounds,[$key,#240] + and $len,$len,#-16 + vld1.8 {$ivec},[$ivp] + vld1.8 {$dat},[$inp],$step + + vld1.32 {q8-q9},[$key] // load key schedule... + sub $rounds,$rounds,#6 + add $key_,$key,x5,lsl#4 // pointer to last 7 round keys + sub $rounds,$rounds,#2 + vld1.32 {q10-q11},[$key_],#32 + vld1.32 {q12-q13},[$key_],#32 + vld1.32 {q14-q15},[$key_],#32 + vld1.32 {$rndlast},[$key_] + + add $key_,$key,#32 + mov $cnt,$rounds + b.eq .Lcbc_dec + + cmp $rounds,#2 + veor $dat,$dat,$ivec + veor $rndzero_n_last,q8,$rndlast + b.eq .Lcbc_enc128 + + vld1.32 {$in0-$in1},[$key_] + add $key_,$key,#16 + add $key4,$key,#16*4 + add $key5,$key,#16*5 + aese $dat,q8 + aesmc $dat,$dat + add $key6,$key,#16*6 + add $key7,$key,#16*7 + b .Lenter_cbc_enc + +.align 4 +.Loop_cbc_enc: + aese $dat,q8 + aesmc $dat,$dat + vst1.8 {$ivec},[$out],#16 +.Lenter_cbc_enc: + aese $dat,q9 + aesmc $dat,$dat + aese $dat,$in0 + aesmc $dat,$dat + vld1.32 {q8},[$key4] + cmp $rounds,#4 + aese $dat,$in1 + aesmc $dat,$dat + vld1.32 {q9},[$key5] + b.eq .Lcbc_enc192 + + aese $dat,q8 + aesmc $dat,$dat + vld1.32 {q8},[$key6] + aese $dat,q9 + aesmc $dat,$dat + vld1.32 {q9},[$key7] + nop + +.Lcbc_enc192: + aese $dat,q8 + aesmc $dat,$dat + subs $len,$len,#16 + aese $dat,q9 + aesmc $dat,$dat + cclr $step,eq + aese $dat,q10 + aesmc $dat,$dat + aese $dat,q11 + aesmc $dat,$dat + vld1.8 {q8},[$inp],$step + aese $dat,q12 + aesmc $dat,$dat + veor q8,q8,$rndzero_n_last + aese $dat,q13 + aesmc $dat,$dat + vld1.32 {q9},[$key_] // re-pre-load rndkey[1] + aese $dat,q14 + aesmc $dat,$dat + aese $dat,q15 + veor $ivec,$dat,$rndlast + b.hs .Loop_cbc_enc + + vst1.8 {$ivec},[$out],#16 + b .Lcbc_done + +.align 5 +.Lcbc_enc128: + vld1.32 {$in0-$in1},[$key_] + aese $dat,q8 + aesmc $dat,$dat + b .Lenter_cbc_enc128 +.Loop_cbc_enc128: + aese $dat,q8 + aesmc $dat,$dat + vst1.8 {$ivec},[$out],#16 +.Lenter_cbc_enc128: + aese $dat,q9 + aesmc $dat,$dat + subs $len,$len,#16 + aese $dat,$in0 + aesmc $dat,$dat + cclr $step,eq + aese $dat,$in1 + aesmc $dat,$dat + aese $dat,q10 + aesmc $dat,$dat + aese $dat,q11 + aesmc $dat,$dat + vld1.8 {q8},[$inp],$step + aese $dat,q12 + aesmc $dat,$dat + aese $dat,q13 + aesmc $dat,$dat + aese $dat,q14 + aesmc $dat,$dat + veor q8,q8,$rndzero_n_last + aese $dat,q15 + veor $ivec,$dat,$rndlast + b.hs .Loop_cbc_enc128 + + vst1.8 {$ivec},[$out],#16 + b .Lcbc_done +___ +{ +my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9)); +$code.=<<___; +.align 5 +.Lcbc_dec: + vld1.8 {$dat2},[$inp],#16 + subs $len,$len,#32 // bias + add $cnt,$rounds,#2 + vorr $in1,$dat,$dat + vorr $dat1,$dat,$dat + vorr $in2,$dat2,$dat2 + b.lo .Lcbc_dec_tail + + vorr $dat1,$dat2,$dat2 + vld1.8 {$dat2},[$inp],#16 + vorr $in0,$dat,$dat + vorr $in1,$dat1,$dat1 + vorr $in2,$dat2,$dat2 + +.Loop3x_cbc_dec: + aesd $dat0,q8 + aesimc $dat0,$dat0 + aesd $dat1,q8 + aesimc $dat1,$dat1 + aesd $dat2,q8 + aesimc $dat2,$dat2 + vld1.32 {q8},[$key_],#16 + subs $cnt,$cnt,#2 + aesd $dat0,q9 + aesimc $dat0,$dat0 + aesd $dat1,q9 + aesimc $dat1,$dat1 + aesd $dat2,q9 + aesimc $dat2,$dat2 + vld1.32 {q9},[$key_],#16 + b.gt .Loop3x_cbc_dec + + aesd $dat0,q8 + aesimc $dat0,$dat0 + aesd $dat1,q8 + aesimc $dat1,$dat1 + aesd $dat2,q8 + aesimc $dat2,$dat2 + veor $tmp0,$ivec,$rndlast + subs $len,$len,#0x30 + veor $tmp1,$in0,$rndlast + mov.lo x6,$len // x6, $cnt, is zero at this point + aesd $dat0,q9 + aesimc $dat0,$dat0 + aesd $dat1,q9 + aesimc $dat1,$dat1 + aesd $dat2,q9 + aesimc $dat2,$dat2 + veor $tmp2,$in1,$rndlast + add $inp,$inp,x6 // $inp is adjusted in such way that + // at exit from the loop $dat1-$dat2 + // are loaded with last "words" + vorr $ivec,$in2,$in2 + mov $key_,$key + aesd $dat0,q12 + aesimc $dat0,$dat0 + aesd $dat1,q12 + aesimc $dat1,$dat1 + aesd $dat2,q12 + aesimc $dat2,$dat2 + vld1.8 {$in0},[$inp],#16 + aesd $dat0,q13 + aesimc $dat0,$dat0 + aesd $dat1,q13 + aesimc $dat1,$dat1 + aesd $dat2,q13 + aesimc $dat2,$dat2 + vld1.8 {$in1},[$inp],#16 + aesd $dat0,q14 + aesimc $dat0,$dat0 + aesd $dat1,q14 + aesimc $dat1,$dat1 + aesd $dat2,q14 + aesimc $dat2,$dat2 + vld1.8 {$in2},[$inp],#16 + aesd $dat0,q15 + aesd $dat1,q15 + aesd $dat2,q15 + vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0] + add $cnt,$rounds,#2 + veor $tmp0,$tmp0,$dat0 + veor $tmp1,$tmp1,$dat1 + veor $dat2,$dat2,$tmp2 + vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1] + vst1.8 {$tmp0},[$out],#16 + vorr $dat0,$in0,$in0 + vst1.8 {$tmp1},[$out],#16 + vorr $dat1,$in1,$in1 + vst1.8 {$dat2},[$out],#16 + vorr $dat2,$in2,$in2 + b.hs .Loop3x_cbc_dec + + cmn $len,#0x30 + b.eq .Lcbc_done + nop + +.Lcbc_dec_tail: + aesd $dat1,q8 + aesimc $dat1,$dat1 + aesd $dat2,q8 + aesimc $dat2,$dat2 + vld1.32 {q8},[$key_],#16 + subs $cnt,$cnt,#2 + aesd $dat1,q9 + aesimc $dat1,$dat1 + aesd $dat2,q9 + aesimc $dat2,$dat2 + vld1.32 {q9},[$key_],#16 + b.gt .Lcbc_dec_tail + + aesd $dat1,q8 + aesimc $dat1,$dat1 + aesd $dat2,q8 + aesimc $dat2,$dat2 + aesd $dat1,q9 + aesimc $dat1,$dat1 + aesd $dat2,q9 + aesimc $dat2,$dat2 + aesd $dat1,q12 + aesimc $dat1,$dat1 + aesd $dat2,q12 + aesimc $dat2,$dat2 + cmn $len,#0x20 + aesd $dat1,q13 + aesimc $dat1,$dat1 + aesd $dat2,q13 + aesimc $dat2,$dat2 + veor $tmp1,$ivec,$rndlast + aesd $dat1,q14 + aesimc $dat1,$dat1 + aesd $dat2,q14 + aesimc $dat2,$dat2 + veor $tmp2,$in1,$rndlast + aesd $dat1,q15 + aesd $dat2,q15 + b.eq .Lcbc_dec_one + veor $tmp1,$tmp1,$dat1 + veor $tmp2,$tmp2,$dat2 + vorr $ivec,$in2,$in2 + vst1.8 {$tmp1},[$out],#16 + vst1.8 {$tmp2},[$out],#16 + b .Lcbc_done + +.Lcbc_dec_one: + veor $tmp1,$tmp1,$dat2 + vorr $ivec,$in2,$in2 + vst1.8 {$tmp1},[$out],#16 + +.Lcbc_done: + vst1.8 {$ivec},[$ivp] +.Lcbc_abort: +___ +} +$code.=<<___ if ($flavour !~ /64/); + vldmia sp!,{d8-d15} + ldmia sp!,{r4-r8,pc} +___ +$code.=<<___ if ($flavour =~ /64/); + ldr x29,[sp],#16 + ret +___ +$code.=<<___; +.size ${prefix}_cbc_encrypt,.-${prefix}_cbc_encrypt +___ +}}} +{{{ +my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4)); +my ($rounds,$cnt,$key_)=("w5","w6","x7"); +my ($ctr,$tctr0,$tctr1,$tctr2)=map("w$_",(8..10,12)); +my $step="x12"; # aliases with $tctr2 + +my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7)); +my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9)); + +my ($dat,$tmp)=($dat0,$tmp0); + +### q8-q15 preloaded key schedule + +$code.=<<___; +.globl ${prefix}_ctr32_encrypt_blocks +.type ${prefix}_ctr32_encrypt_blocks,%function +.align 5 +${prefix}_ctr32_encrypt_blocks: +___ +$code.=<<___ if ($flavour =~ /64/); + stp x29,x30,[sp,#-16]! + add x29,sp,#0 +___ +$code.=<<___ if ($flavour !~ /64/); + mov ip,sp + stmdb sp!,{r4-r10,lr} + vstmdb sp!,{d8-d15} @ ABI specification says so + ldr r4, [ip] @ load remaining arg +___ +$code.=<<___; + ldr $rounds,[$key,#240] + + ldr $ctr, [$ivp, #12] + vld1.32 {$dat0},[$ivp] + + vld1.32 {q8-q9},[$key] // load key schedule... + sub $rounds,$rounds,#4 + mov $step,#16 + cmp $len,#2 + add $key_,$key,x5,lsl#4 // pointer to last 5 round keys + sub $rounds,$rounds,#2 + vld1.32 {q12-q13},[$key_],#32 + vld1.32 {q14-q15},[$key_],#32 + vld1.32 {$rndlast},[$key_] + add $key_,$key,#32 + mov $cnt,$rounds + cclr $step,lo +#ifndef __ARMEB__ + rev $ctr, $ctr +#endif + vorr $dat1,$dat0,$dat0 + add $tctr1, $ctr, #1 + vorr $dat2,$dat0,$dat0 + add $ctr, $ctr, #2 + vorr $ivec,$dat0,$dat0 + rev $tctr1, $tctr1 + vmov.32 ${dat1}[3],$tctr1 + b.ls .Lctr32_tail + rev $tctr2, $ctr + sub $len,$len,#3 // bias + vmov.32 ${dat2}[3],$tctr2 + b .Loop3x_ctr32 + +.align 4 +.Loop3x_ctr32: + aese $dat0,q8 + aesmc $dat0,$dat0 + aese $dat1,q8 + aesmc $dat1,$dat1 + aese $dat2,q8 + aesmc $dat2,$dat2 + vld1.32 {q8},[$key_],#16 + subs $cnt,$cnt,#2 + aese $dat0,q9 + aesmc $dat0,$dat0 + aese $dat1,q9 + aesmc $dat1,$dat1 + aese $dat2,q9 + aesmc $dat2,$dat2 + vld1.32 {q9},[$key_],#16 + b.gt .Loop3x_ctr32 + + aese $dat0,q8 + aesmc $tmp0,$dat0 + aese $dat1,q8 + aesmc $tmp1,$dat1 + vld1.8 {$in0},[$inp],#16 + vorr $dat0,$ivec,$ivec + aese $dat2,q8 + aesmc $dat2,$dat2 + vld1.8 {$in1},[$inp],#16 + vorr $dat1,$ivec,$ivec + aese $tmp0,q9 + aesmc $tmp0,$tmp0 + aese $tmp1,q9 + aesmc $tmp1,$tmp1 + vld1.8 {$in2},[$inp],#16 + mov $key_,$key + aese $dat2,q9 + aesmc $tmp2,$dat2 + vorr $dat2,$ivec,$ivec + add $tctr0,$ctr,#1 + aese $tmp0,q12 + aesmc $tmp0,$tmp0 + aese $tmp1,q12 + aesmc $tmp1,$tmp1 + veor $in0,$in0,$rndlast + add $tctr1,$ctr,#2 + aese $tmp2,q12 + aesmc $tmp2,$tmp2 + veor $in1,$in1,$rndlast + add $ctr,$ctr,#3 + aese $tmp0,q13 + aesmc $tmp0,$tmp0 + aese $tmp1,q13 + aesmc $tmp1,$tmp1 + veor $in2,$in2,$rndlast + rev $tctr0,$tctr0 + aese $tmp2,q13 + aesmc $tmp2,$tmp2 + vmov.32 ${dat0}[3], $tctr0 + rev $tctr1,$tctr1 + aese $tmp0,q14 + aesmc $tmp0,$tmp0 + aese $tmp1,q14 + aesmc $tmp1,$tmp1 + vmov.32 ${dat1}[3], $tctr1 + rev $tctr2,$ctr + aese $tmp2,q14 + aesmc $tmp2,$tmp2 + vmov.32 ${dat2}[3], $tctr2 + subs $len,$len,#3 + aese $tmp0,q15 + aese $tmp1,q15 + aese $tmp2,q15 + + veor $in0,$in0,$tmp0 + vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0] + vst1.8 {$in0},[$out],#16 + veor $in1,$in1,$tmp1 + mov $cnt,$rounds + vst1.8 {$in1},[$out],#16 + veor $in2,$in2,$tmp2 + vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1] + vst1.8 {$in2},[$out],#16 + b.hs .Loop3x_ctr32 + + adds $len,$len,#3 + b.eq .Lctr32_done + cmp $len,#1 + mov $step,#16 + cclr $step,eq + +.Lctr32_tail: + aese $dat0,q8 + aesmc $dat0,$dat0 + aese $dat1,q8 + aesmc $dat1,$dat1 + vld1.32 {q8},[$key_],#16 + subs $cnt,$cnt,#2 + aese $dat0,q9 + aesmc $dat0,$dat0 + aese $dat1,q9 + aesmc $dat1,$dat1 + vld1.32 {q9},[$key_],#16 + b.gt .Lctr32_tail + + aese $dat0,q8 + aesmc $dat0,$dat0 + aese $dat1,q8 + aesmc $dat1,$dat1 + aese $dat0,q9 + aesmc $dat0,$dat0 + aese $dat1,q9 + aesmc $dat1,$dat1 + vld1.8 {$in0},[$inp],$step + aese $dat0,q12 + aesmc $dat0,$dat0 + aese $dat1,q12 + aesmc $dat1,$dat1 + vld1.8 {$in1},[$inp] + aese $dat0,q13 + aesmc $dat0,$dat0 + aese $dat1,q13 + aesmc $dat1,$dat1 + veor $in0,$in0,$rndlast + aese $dat0,q14 + aesmc $dat0,$dat0 + aese $dat1,q14 + aesmc $dat1,$dat1 + veor $in1,$in1,$rndlast + aese $dat0,q15 + aese $dat1,q15 + + cmp $len,#1 + veor $in0,$in0,$dat0 + veor $in1,$in1,$dat1 + vst1.8 {$in0},[$out],#16 + b.eq .Lctr32_done + vst1.8 {$in1},[$out] + +.Lctr32_done: +___ +$code.=<<___ if ($flavour !~ /64/); + vldmia sp!,{d8-d15} + ldmia sp!,{r4-r10,pc} +___ +$code.=<<___ if ($flavour =~ /64/); + ldr x29,[sp],#16 + ret +___ +$code.=<<___; +.size ${prefix}_ctr32_encrypt_blocks,.-${prefix}_ctr32_encrypt_blocks +___ +}}} +$code.=<<___; +#endif +___ +######################################## +if ($flavour =~ /64/) { ######## 64-bit code + my %opcode = ( + "aesd" => 0x4e285800, "aese" => 0x4e284800, + "aesimc"=> 0x4e287800, "aesmc" => 0x4e286800 ); + + local *unaes = sub { + my ($mnemonic,$arg)=@_; + + $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o && + sprintf ".inst\t0x%08x\t//%s %s", + $opcode{$mnemonic}|$1|($2<<5), + $mnemonic,$arg; + }; + + foreach(split("\n",$code)) { + s/\`([^\`]*)\`/eval($1)/geo; + + s/\bq([0-9]+)\b/"v".($1<8?$1:$1+8).".16b"/geo; # old->new registers + s/@\s/\/\//o; # old->new style commentary + + #s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo or + s/cclr\s+([wx])([^,]+),\s*([a-z]+)/csel $1$2,$1zr,$1$2,$3/o or + s/mov\.([a-z]+)\s+([wx][0-9]+),\s*([wx][0-9]+)/csel $2,$3,$2,$1/o or + s/vmov\.i8/movi/o or # fix up legacy mnemonics + s/vext\.8/ext/o or + s/vrev32\.8/rev32/o or + s/vtst\.8/cmtst/o or + s/vshr/ushr/o or + s/^(\s+)v/$1/o or # strip off v prefix + s/\bbx\s+lr\b/ret/o; + + # fix up remainig legacy suffixes + s/\.[ui]?8//o; + m/\],#8/o and s/\.16b/\.8b/go; + s/\.[ui]?32//o and s/\.16b/\.4s/go; + s/\.[ui]?64//o and s/\.16b/\.2d/go; + s/\.[42]([sd])\[([0-3])\]/\.$1\[$2\]/o; + + print $_,"\n"; + } +} else { ######## 32-bit code + my %opcode = ( + "aesd" => 0xf3b00340, "aese" => 0xf3b00300, + "aesimc"=> 0xf3b003c0, "aesmc" => 0xf3b00380 ); + + local *unaes = sub { + my ($mnemonic,$arg)=@_; + + if ($arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o) { + my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19) + |(($2&7)<<1) |(($2&8)<<2); + # since ARMv7 instructions are always encoded little-endian. + # correct solution is to use .inst directive, but older + # assemblers don't implement it:-( + sprintf ".byte\t0x%02x,0x%02x,0x%02x,0x%02x\t@ %s %s", + $word&0xff,($word>>8)&0xff, + ($word>>16)&0xff,($word>>24)&0xff, + $mnemonic,$arg; + } + }; + + sub unvtbl { + my $arg=shift; + + $arg =~ m/q([0-9]+),\s*\{q([0-9]+)\},\s*q([0-9]+)/o && + sprintf "vtbl.8 d%d,{q%d},d%d\n\t". + "vtbl.8 d%d,{q%d},d%d", 2*$1,$2,2*$3, 2*$1+1,$2,2*$3+1; + } + + sub unvdup32 { + my $arg=shift; + + $arg =~ m/q([0-9]+),\s*q([0-9]+)\[([0-3])\]/o && + sprintf "vdup.32 q%d,d%d[%d]",$1,2*$2+($3>>1),$3&1; + } + + sub unvmov32 { + my $arg=shift; + + $arg =~ m/q([0-9]+)\[([0-3])\],(.*)/o && + sprintf "vmov.32 d%d[%d],%s",2*$1+($2>>1),$2&1,$3; + } + + foreach(split("\n",$code)) { + s/\`([^\`]*)\`/eval($1)/geo; + + s/\b[wx]([0-9]+)\b/r$1/go; # new->old registers + s/\bv([0-9])\.[12468]+[bsd]\b/q$1/go; # new->old registers + s/\/\/\s?/@ /o; # new->old style commentary + + # fix up remainig new-style suffixes + s/\{q([0-9]+)\},\s*\[(.+)\],#8/sprintf "{d%d},[$2]!",2*$1/eo or + s/\],#[0-9]+/]!/o; + + s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo or + s/cclr\s+([^,]+),\s*([a-z]+)/mov$2 $1,#0/o or + s/vtbl\.8\s+(.*)/unvtbl($1)/geo or + s/vdup\.32\s+(.*)/unvdup32($1)/geo or + s/vmov\.32\s+(.*)/unvmov32($1)/geo or + s/^(\s+)b\./$1b/o or + s/^(\s+)mov\./$1mov/o or + s/^(\s+)ret/$1bx\tlr/o; + + print $_,"\n"; + } +} + +close STDOUT; -- cgit v1.2.3