diff options
Diffstat (limited to 'openssl-1.1.0h/test/recipes/80-test_ssl_old.t')
| -rw-r--r-- | openssl-1.1.0h/test/recipes/80-test_ssl_old.t | 629 |
1 files changed, 629 insertions, 0 deletions
diff --git a/openssl-1.1.0h/test/recipes/80-test_ssl_old.t b/openssl-1.1.0h/test/recipes/80-test_ssl_old.t new file mode 100644 index 0000000..6468bd6 --- /dev/null +++ b/openssl-1.1.0h/test/recipes/80-test_ssl_old.t @@ -0,0 +1,629 @@ +#! /usr/bin/env perl +# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved. +# +# Licensed under the OpenSSL license (the "License"). You may not use +# this file except in compliance with the License. You can obtain a copy +# in the file LICENSE in the source distribution or at +# https://www.openssl.org/source/license.html + + +use strict; +use warnings; + +use POSIX; +use File::Basename; +use File::Copy; +use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/; +use OpenSSL::Test::Utils; + +setup("test_ssl"); + +$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf"); + +my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk, + $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, + $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) = + anydisabled qw/rsa dsa dh ec srp psk + ssl3 tls1 tls1_1 tls1_2 + dtls dtls1 dtls1_2 ct/; +my $no_anytls = alldisabled(available_protocols("tls")); +my $no_anydtls = alldisabled(available_protocols("dtls")); + +plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build" + if $no_anytls && $no_anydtls; + +my $digest = "-sha1"; +my @reqcmd = ("openssl", "req"); +my @x509cmd = ("openssl", "x509", $digest); +my @verifycmd = ("openssl", "verify"); +my @gendsacmd = ("openssl", "gendsa"); +my $dummycnf = srctop_file("apps", "openssl.cnf"); + +my $CAkey = "keyCA.ss"; +my $CAcert="certCA.ss"; +my $CAserial="certCA.srl"; +my $CAreq="reqCA.ss"; +my $CAconf=srctop_file("test","CAss.cnf"); +my $CAreq2="req2CA.ss"; # temp + +my $Uconf=srctop_file("test","Uss.cnf"); +my $Ukey="keyU.ss"; +my $Ureq="reqU.ss"; +my $Ucert="certU.ss"; + +my $Dkey="keyD.ss"; +my $Dreq="reqD.ss"; +my $Dcert="certD.ss"; + +my $Ekey="keyE.ss"; +my $Ereq="reqE.ss"; +my $Ecert="certE.ss"; + +my $P1conf=srctop_file("test","P1ss.cnf"); +my $P1key="keyP1.ss"; +my $P1req="reqP1.ss"; +my $P1cert="certP1.ss"; +my $P1intermediate="tmp_intP1.ss"; + +my $P2conf=srctop_file("test","P2ss.cnf"); +my $P2key="keyP2.ss"; +my $P2req="reqP2.ss"; +my $P2cert="certP2.ss"; +my $P2intermediate="tmp_intP2.ss"; + +my $server_sess="server.ss"; +my $client_sess="client.ss"; + +# ssltest_old.c is deprecated in favour of the new framework in ssl_test.c +# If you're adding tests here, you probably want to convert them to the +# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead. +plan tests => + 1 # For testss + +6 # For the first testssl + ; + +subtest 'test_ss' => sub { + if (testss()) { + open OUT, ">", "intP1.ss"; + copy($CAcert, \*OUT); copy($Ucert, \*OUT); + close OUT; + + open OUT, ">", "intP2.ss"; + copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT); + close OUT; + } +}; + +note('test_ssl -- key U'); +testssl("keyU.ss", $Ucert, $CAcert); + +# ----------- +# subtest functions +sub testss { + open RND, ">>", ".rnd"; + print RND "string to make the random number generator think it has entropy"; + close RND; + + my @req_dsa = ("-newkey", + "dsa:".srctop_file("apps", "dsa1024.pem")); + my $dsaparams = srctop_file("apps", "dsa1024.pem"); + my @req_new; + if ($no_rsa) { + @req_new = @req_dsa; + } else { + @req_new = ("-new"); + } + + plan tests => 17; + + SKIP: { + skip 'failure', 16 unless + ok(run(app([@reqcmd, "-config", $CAconf, + "-out", $CAreq, "-keyout", $CAkey, + @req_new])), + 'make cert request'); + + skip 'failure', 15 unless + ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30", + "-req", "-out", $CAcert, "-signkey", $CAkey, + "-extfile", $CAconf, "-extensions", "v3_ca"], + stdout => "err.ss")), + 'convert request into self-signed cert'); + + skip 'failure', 14 unless + ok(run(app([@x509cmd, "-in", $CAcert, + "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2], + stdout => "err.ss")), + 'convert cert into a cert request'); + + skip 'failure', 13 unless + ok(run(app([@reqcmd, "-config", $dummycnf, + "-verify", "-in", $CAreq, "-noout"])), + 'verify request 1'); + + + skip 'failure', 12 unless + ok(run(app([@reqcmd, "-config", $dummycnf, + "-verify", "-in", $CAreq2, "-noout"])), + 'verify request 2'); + + skip 'failure', 11 unless + ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])), + 'verify signature'); + + skip 'failure', 10 unless + ok(run(app([@reqcmd, "-config", $Uconf, + "-out", $Ureq, "-keyout", $Ukey, @req_new], + stdout => "err.ss")), + 'make a user cert request'); + + skip 'failure', 9 unless + ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30", + "-req", "-out", $Ucert, + "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial, + "-extfile", $Uconf, "-extensions", "v3_ee"], + stdout => "err.ss")) + && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])), + 'sign user cert request'); + + skip 'failure', 8 unless + ok(run(app([@x509cmd, + "-subject", "-issuer", "-startdate", "-enddate", + "-noout", "-in", $Ucert])), + 'Certificate details'); + + skip 'failure', 7 unless + subtest 'DSA certificate creation' => sub { + plan skip_all => "skipping DSA certificate creation" + if $no_dsa; + + plan tests => 5; + + SKIP: { + $ENV{CN2} = "DSA Certificate"; + skip 'failure', 4 unless + ok(run(app([@gendsacmd, "-out", $Dkey, + $dsaparams], + stdout => "err.ss")), + "make a DSA key"); + skip 'failure', 3 unless + ok(run(app([@reqcmd, "-new", "-config", $Uconf, + "-out", $Dreq, "-key", $Dkey], + stdout => "err.ss")), + "make a DSA user cert request"); + skip 'failure', 2 unless + ok(run(app([@x509cmd, "-CAcreateserial", + "-in", $Dreq, + "-days", "30", + "-req", + "-out", $Dcert, + "-CA", $CAcert, "-CAkey", $CAkey, + "-CAserial", $CAserial, + "-extfile", $Uconf, + "-extensions", "v3_ee_dsa"], + stdout => "err.ss")), + "sign DSA user cert request"); + skip 'failure', 1 unless + ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])), + "verify DSA user cert"); + skip 'failure', 0 unless + ok(run(app([@x509cmd, + "-subject", "-issuer", + "-startdate", "-enddate", "-noout", + "-in", $Dcert])), + "DSA Certificate details"); + } + }; + + skip 'failure', 6 unless + subtest 'ECDSA/ECDH certificate creation' => sub { + plan skip_all => "skipping ECDSA/ECDH certificate creation" + if $no_ec; + + plan tests => 5; + + SKIP: { + $ENV{CN2} = "ECDSA Certificate"; + skip 'failure', 4 unless + ok(run(app(["openssl", "ecparam", "-name", "P-256", + "-out", "ecp.ss"])), + "make EC parameters"); + skip 'failure', 3 unless + ok(run(app([@reqcmd, "-config", $Uconf, + "-out", $Ereq, "-keyout", $Ekey, + "-newkey", "ec:ecp.ss"], + stdout => "err.ss")), + "make a ECDSA/ECDH user cert request"); + skip 'failure', 2 unless + ok(run(app([@x509cmd, "-CAcreateserial", + "-in", $Ereq, + "-days", "30", + "-req", + "-out", $Ecert, + "-CA", $CAcert, "-CAkey", $CAkey, + "-CAserial", $CAserial, + "-extfile", $Uconf, + "-extensions", "v3_ee_ec"], + stdout => "err.ss")), + "sign ECDSA/ECDH user cert request"); + skip 'failure', 1 unless + ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])), + "verify ECDSA/ECDH user cert"); + skip 'failure', 0 unless + ok(run(app([@x509cmd, + "-subject", "-issuer", + "-startdate", "-enddate", "-noout", + "-in", $Ecert])), + "ECDSA Certificate details"); + } + }; + + skip 'failure', 5 unless + ok(run(app([@reqcmd, "-config", $P1conf, + "-out", $P1req, "-keyout", $P1key, @req_new], + stdout => "err.ss")), + 'make a proxy cert request'); + + + skip 'failure', 4 unless + ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30", + "-req", "-out", $P1cert, + "-CA", $Ucert, "-CAkey", $Ukey, + "-extfile", $P1conf, "-extensions", "v3_proxy"], + stdout => "err.ss")), + 'sign proxy with user cert'); + + copy($Ucert, $P1intermediate); + run(app([@verifycmd, "-CAfile", $CAcert, + "-untrusted", $P1intermediate, $P1cert])); + ok(run(app([@x509cmd, + "-subject", "-issuer", "-startdate", "-enddate", + "-noout", "-in", $P1cert])), + 'Certificate details'); + + skip 'failure', 2 unless + ok(run(app([@reqcmd, "-config", $P2conf, + "-out", $P2req, "-keyout", $P2key, + @req_new], + stdout => "err.ss")), + 'make another proxy cert request'); + + + skip 'failure', 1 unless + ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30", + "-req", "-out", $P2cert, + "-CA", $P1cert, "-CAkey", $P1key, + "-extfile", $P2conf, "-extensions", "v3_proxy"], + stdout => "err.ss")), + 'sign second proxy cert request with the first proxy cert'); + + + open OUT, ">", $P2intermediate; + copy($Ucert, \*OUT); copy($P1cert, \*OUT); + close OUT; + run(app([@verifycmd, "-CAfile", $CAcert, + "-untrusted", $P2intermediate, $P2cert])); + ok(run(app([@x509cmd, + "-subject", "-issuer", "-startdate", "-enddate", + "-noout", "-in", $P2cert])), + 'Certificate details'); + } +} + +sub testssl { + my ($key, $cert, $CAtmp) = @_; + my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs")); + + my @ssltest = ("ssltest_old", + "-s_key", $key, "-s_cert", $cert, + "-c_key", $key, "-c_cert", $cert); + + my $serverinfo = srctop_file("test","serverinfo.pem"); + + my $dsa_cert = 0; + if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert, + "-text", "-noout"]), capture => 1)) { + $dsa_cert = 1; + } + + + # plan tests => 11; + + subtest 'standard SSL tests' => sub { + ###################################################################### + plan tests => 21; + + SKIP: { + skip "SSLv3 is not supported by this OpenSSL build", 4 + if disabled("ssl3"); + + ok(run(test([@ssltest, "-bio_pair", "-ssl3"])), + 'test sslv3 via BIO pair'); + ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])), + 'test sslv3 with server authentication via BIO pair'); + ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])), + 'test sslv3 with client authentication via BIO pair'); + ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])), + 'test sslv3 with both server and client authentication via BIO pair'); + } + + SKIP: { + skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1 + if $no_anytls; + + ok(run(test([@ssltest, "-bio_pair"])), + 'test sslv2/sslv3 via BIO pair'); + } + + SKIP: { + skip "DTLSv1 is not supported by this OpenSSL build", 4 + if disabled("dtls1"); + + ok(run(test([@ssltest, "-dtls1"])), + 'test dtlsv1'); + ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA])), + 'test dtlsv1 with server authentication'); + ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA])), + 'test dtlsv1 with client authentication'); + ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA])), + 'test dtlsv1 with both server and client authentication'); + } + + SKIP: { + skip "DTLSv1.2 is not supported by this OpenSSL build", 4 + if disabled("dtls1_2"); + + ok(run(test([@ssltest, "-dtls12"])), + 'test dtlsv1.2'); + ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA])), + 'test dtlsv1.2 with server authentication'); + ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA])), + 'test dtlsv1.2 with client authentication'); + ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA])), + 'test dtlsv1.2 with both server and client authentication'); + } + + SKIP: { + skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8 + if $no_anytls; + + SKIP: { + skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert; + + ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])), + 'test sslv2/sslv3 w/o (EC)DHE via BIO pair'); + } + + ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])), + 'test sslv2/sslv3 with 1024bit DHE via BIO pair'); + ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])), + 'test sslv2/sslv3 with server authentication'); + ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])), + 'test sslv2/sslv3 with client authentication via BIO pair'); + ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])), + 'test sslv2/sslv3 with both client and server authentication via BIO pair'); + ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])), + 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify'); + + SKIP: { + skip "No IPv4 available on this machine", 1 + unless !disabled("sock") && have_IPv4(); + ok(run(test([@ssltest, "-ipv4"])), + 'test TLS via IPv4'); + } + + SKIP: { + skip "No IPv6 available on this machine", 1 + unless !disabled("sock") && have_IPv6(); + ok(run(test([@ssltest, "-ipv6"])), + 'test TLS via IPv6'); + } + } + }; + + subtest "Testing ciphersuites" => sub { + + my @exkeys = (); + my $ciphers = "-PSK:-SRP"; + + if ($no_dh) { + note "skipping DHE tests\n"; + $ciphers .= ":-kDHE"; + } + if ($no_dsa) { + note "skipping DSA tests\n"; + $ciphers .= ":-aDSA"; + } else { + push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss"; + } + + if ($no_ec) { + note "skipping EC tests\n"; + $ciphers .= ":!aECDSA:!kECDH"; + } else { + push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss"; + } + + my @protocols = (); + # We only use the flags that ssltest_old understands + push @protocols, "-tls1_2" unless $no_tls1_2; + push @protocols, "-tls1" unless $no_tls1; + push @protocols, "-ssl3" unless $no_ssl3; + my $protocolciphersuitecount = 0; + my %ciphersuites = (); + foreach my $protocol (@protocols) { + $ciphersuites{$protocol} = + [ map { s|\R||; split(/:/, $_) } + run(app(["openssl", "ciphers", "-s", $protocol, + "ALL:$ciphers"]), capture => 1) ]; + $protocolciphersuitecount += scalar @{$ciphersuites{$protocol}}; + } + + plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build" + if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0; + + # The count of protocols is because in addition to the ciphersuits + # we got above, we're running a weak DH test for each protocol + plan tests => $protocolciphersuitecount + scalar(keys %ciphersuites); + + foreach my $protocol (sort keys %ciphersuites) { + note "Testing ciphersuites for $protocol"; + # ssltest_old doesn't know -tls1_2, but that's fine, since that's + # the default choice if TLSv1.2 enabled + my $flag = $protocol eq "-tls1_2" ? "" : $protocol; + foreach my $cipher (@{$ciphersuites{$protocol}}) { + if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) { + note "*****SKIPPING $protocol $cipher"; + ok(1); + } else { + ok(run(test([@ssltest, @exkeys, "-cipher", $cipher, + $flag || ()])), + "Testing $cipher"); + } + } + is(run(test([@ssltest, + "-s_cipher", "EDH", + "-c_cipher", 'EDH:@SECLEVEL=1', + "-dhe512", + $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0, + "testing connection with weak DH, expecting failure"); + } + }; + + subtest 'RSA/(EC)DHE/PSK tests' => sub { + ###################################################################### + + plan tests => 5; + + SKIP: { + skip "TLSv1.0 is not supported by this OpenSSL build", 5 + if $no_tls1; + + SKIP: { + skip "skipping anonymous DH tests", 1 + if ($no_dh); + + ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])), + 'test tlsv1 with 1024bit anonymous DH, multiple handshakes'); + } + + SKIP: { + skip "skipping RSA tests", 2 + if $no_rsa; + + ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])), + 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes'); + + skip "skipping RSA+DHE tests", 1 + if $no_dh; + + ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])), + 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes'); + } + + SKIP: { + skip "skipping PSK tests", 2 + if ($no_psk); + + ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])), + 'test tls1 with PSK'); + + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])), + 'test tls1 with PSK via BIO pair'); + } + } + + }; + + subtest 'Custom Extension tests' => sub { + ###################################################################### + + plan tests => 1; + + SKIP: { + skip "TLSv1.0 is not supported by this OpenSSL build", 1 + if $no_tls1; + + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])), + 'test tls1 with custom extensions'); + } + }; + + subtest 'Serverinfo tests' => sub { + ###################################################################### + + plan tests => 5; + + SKIP: { + skip "TLSv1.0 is not supported by this OpenSSL build", 5 + if $no_tls1; + + note('echo test tls1 with serverinfo'); + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo]))); + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"]))); + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"]))); + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"]))); + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"]))); + } + }; + + subtest 'SRP tests' => sub { + + plan tests => 4; + + SKIP: { + skip "skipping SRP tests", 4 + if $no_srp || alldisabled(grep !/^ssl3/, available_protocols("tls")); + + ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])), + 'test tls1 with SRP'); + + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])), + 'test tls1 with SRP via BIO pair'); + + ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])), + 'test tls1 with SRP auth'); + + ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])), + 'test tls1 with SRP auth via BIO pair'); + } + }; +} + +unlink $CAkey; +unlink $CAcert; +unlink $CAserial; +unlink $CAreq; +unlink $CAreq2; + +unlink $Ukey; +unlink $Ureq; +unlink $Ucert; +unlink basename($Ucert, '.ss').'.srl'; + +unlink $Dkey; +unlink $Dreq; +unlink $Dcert; + +unlink $Ekey; +unlink $Ereq; +unlink $Ecert; + +unlink $P1key; +unlink $P1req; +unlink $P1cert; +unlink basename($P1cert, '.ss').'.srl'; +unlink $P1intermediate; +unlink "intP1.ss"; + +unlink $P2key; +unlink $P2req; +unlink $P2cert; +unlink $P2intermediate; +unlink "intP2.ss"; + +unlink "ecp.ss"; +unlink "err.ss"; + +unlink $server_sess; +unlink $client_sess; |