diff options
Diffstat (limited to 'openssl-1.1.0h/doc/crypto/X509_STORE_CTX_get_error.pod')
| -rw-r--r-- | openssl-1.1.0h/doc/crypto/X509_STORE_CTX_get_error.pod | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/openssl-1.1.0h/doc/crypto/X509_STORE_CTX_get_error.pod b/openssl-1.1.0h/doc/crypto/X509_STORE_CTX_get_error.pod new file mode 100644 index 0000000..105e051 --- /dev/null +++ b/openssl-1.1.0h/doc/crypto/X509_STORE_CTX_get_error.pod @@ -0,0 +1,338 @@ +=pod + +=head1 NAME + +X509_STORE_CTX_get_error, X509_STORE_CTX_set_error, +X509_STORE_CTX_get_error_depth, X509_STORE_CTX_set_error_depth, +X509_STORE_CTX_get_current_cert, X509_STORE_CTX_set_current_cert, +X509_STORE_CTX_get0_cert, X509_STORE_CTX_get1_chain, +X509_verify_cert_error_string - get or set certificate verification status +information + +=head1 SYNOPSIS + + #include <openssl/x509.h> + + int X509_STORE_CTX_get_error(X509_STORE_CTX *ctx); + void X509_STORE_CTX_set_error(X509_STORE_CTX *ctx, int s); + int X509_STORE_CTX_get_error_depth(X509_STORE_CTX *ctx); + void X509_STORE_CTX_set_error_depth(X509_STORE_CTX *ctx, int depth); + X509 *X509_STORE_CTX_get_current_cert(X509_STORE_CTX *ctx); + void X509_STORE_CTX_set_current_cert(X509_STORE_CTX *ctx, X509 *x); + X509 *X509_STORE_CTX_get0_cert(X509_STORE_CTX *ctx); + + STACK_OF(X509) *X509_STORE_CTX_get1_chain(X509_STORE_CTX *ctx); + + const char *X509_verify_cert_error_string(long n); + +=head1 DESCRIPTION + +These functions are typically called after X509_verify_cert() has indicated +an error or in a verification callback to determine the nature of an error. + +X509_STORE_CTX_get_error() returns the error code of B<ctx>, see +the B<ERROR CODES> section for a full description of all error codes. + +X509_STORE_CTX_set_error() sets the error code of B<ctx> to B<s>. For example +it might be used in a verification callback to set an error based on additional +checks. + +X509_STORE_CTX_get_error_depth() returns the B<depth> of the error. This is a +non-negative integer representing where in the certificate chain the error +occurred. If it is zero it occurred in the end entity certificate, one if +it is the certificate which signed the end entity certificate and so on. + +X509_STORE_CTX_set_error_depth() sets the error B<depth>. +This can be used in combination with X509_STORE_CTX_set_error() to set the +depth at which an error condition was detected. + +X509_STORE_CTX_get_current_cert() returns the certificate in B<ctx> which +caused the error or B<NULL> if no certificate is relevant. + +X509_STORE_CTX_set_current_cert() sets the certificate B<x> in B<ctx> which +caused the error. +This value is not intended to remain valid for very long, and remains owned by +the caller. +It may be examined by a verification callback invoked to handle each error +encountered during chain verification and is no longer required after such a +callback. +If a callback wishes the save the certificate for use after it returns, it +needs to increment its reference count via L<X509_up_ref(3)>. +Once such a I<saved> certificate is no longer needed it can be freed with +L<X509_free(3)>. + +X509_STORE_CTX_get0_cert() retrieves an internal pointer to the +certificate being verified by the B<ctx>. + +X509_STORE_CTX_get1_chain() returns a complete validate chain if a previous +call to X509_verify_cert() is successful. If the call to X509_verify_cert() +is B<not> successful the returned chain may be incomplete or invalid. The +returned chain persists after the B<ctx> structure is freed, when it is +no longer needed it should be free up using: + + sk_X509_pop_free(chain, X509_free); + +X509_verify_cert_error_string() returns a human readable error string for +verification error B<n>. + +=head1 RETURN VALUES + +X509_STORE_CTX_get_error() returns B<X509_V_OK> or an error code. + +X509_STORE_CTX_get_error_depth() returns a non-negative error depth. + +X509_STORE_CTX_get_current_cert() returns the certificate which caused the +error or B<NULL> if no certificate is relevant to the error. + +X509_verify_cert_error_string() returns a human readable error string for +verification error B<n>. + +=head1 ERROR CODES + +A list of error codes and messages is shown below. Some of the +error codes are defined but currently never returned: these are described as +"unused". + +=over 4 + +=item B<X509_V_OK: ok> + +the operation was successful. + +=item B<X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT: unable to get issuer certificate> + +the issuer certificate could not be found: this occurs if the issuer certificate +of an untrusted certificate cannot be found. + +=item B<X509_V_ERR_UNABLE_TO_GET_CRL: unable to get certificate CRL> + +the CRL of a certificate could not be found. + +=item B<X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE: unable to decrypt certificate's signature> + +the certificate signature could not be decrypted. This means that the actual +signature value could not be determined rather than it not matching the +expected value, this is only meaningful for RSA keys. + +=item B<X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE: unable to decrypt CRL's signature> + +the CRL signature could not be decrypted: this means that the actual signature +value could not be determined rather than it not matching the expected value. +Unused. + +=item B<X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY: unable to decode issuer public key> + +the public key in the certificate SubjectPublicKeyInfo could not be read. + +=item B<X509_V_ERR_CERT_SIGNATURE_FAILURE: certificate signature failure> + +the signature of the certificate is invalid. + +=item B<X509_V_ERR_CRL_SIGNATURE_FAILURE: CRL signature failure> + +the signature of the certificate is invalid. + +=item B<X509_V_ERR_CERT_NOT_YET_VALID: certificate is not yet valid> + +the certificate is not yet valid: the notBefore date is after the current time. + +=item B<X509_V_ERR_CERT_HAS_EXPIRED: certificate has expired> + +the certificate has expired: that is the notAfter date is before the current time. + +=item B<X509_V_ERR_CRL_NOT_YET_VALID: CRL is not yet valid> + +the CRL is not yet valid. + +=item B<X509_V_ERR_CRL_HAS_EXPIRED: CRL has expired> + +the CRL has expired. + +=item B<X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD: format error in certificate's notBefore field> + +the certificate notBefore field contains an invalid time. + +=item B<X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD: format error in certificate's notAfter field> + +the certificate notAfter field contains an invalid time. + +=item B<X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD: format error in CRL's lastUpdate field> + +the CRL lastUpdate field contains an invalid time. + +=item B<X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD: format error in CRL's nextUpdate field> + +the CRL nextUpdate field contains an invalid time. + +=item B<X509_V_ERR_OUT_OF_MEM: out of memory> + +an error occurred trying to allocate memory. This should never happen. + +=item B<X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT: self signed certificate> + +the passed certificate is self signed and the same certificate cannot be found +in the list of trusted certificates. + +=item B<X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN: self signed certificate in certificate chain> + +the certificate chain could be built up using the untrusted certificates but +the root could not be found locally. + +=item B<X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate> + +the issuer certificate of a locally looked up certificate could not be found. +This normally means the list of trusted certificates is not complete. + +=item B<X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE: unable to verify the first certificate> + +no signatures could be verified because the chain contains only one certificate +and it is not self signed. + +=item B<X509_V_ERR_CERT_CHAIN_TOO_LONG: certificate chain too long> + +the certificate chain length is greater than the supplied maximum depth. Unused. + +=item B<X509_V_ERR_CERT_REVOKED: certificate revoked> + +the certificate has been revoked. + +=item B<X509_V_ERR_INVALID_CA: invalid CA certificate> + +a CA certificate is invalid. Either it is not a CA or its extensions are not +consistent with the supplied purpose. + +=item B<X509_V_ERR_PATH_LENGTH_EXCEEDED: path length constraint exceeded> + +the basicConstraints path-length parameter has been exceeded. + +=item B<X509_V_ERR_INVALID_PURPOSE: unsupported certificate purpose> + +the supplied certificate cannot be used for the specified purpose. + +=item B<X509_V_ERR_CERT_UNTRUSTED: certificate not trusted> + +the root CA is not marked as trusted for the specified purpose. + +=item B<X509_V_ERR_CERT_REJECTED: certificate rejected> + +the root CA is marked to reject the specified purpose. + +=item B<X509_V_ERR_SUBJECT_ISSUER_MISMATCH: subject issuer mismatch> + +the current candidate issuer certificate was rejected because its subject name +did not match the issuer name of the current certificate. This is only set +if issuer check debugging is enabled it is used for status notification and +is B<not> in itself an error. + +=item B<X509_V_ERR_AKID_SKID_MISMATCH: authority and subject key identifier mismatch> + +the current candidate issuer certificate was rejected because its subject key +identifier was present and did not match the authority key identifier current +certificate. This is only set if issuer check debugging is enabled it is used +for status notification and is B<not> in itself an error. + +=item B<X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH: authority and issuer serial number mismatch> + +the current candidate issuer certificate was rejected because its issuer name +and serial number was present and did not match the authority key identifier of +the current certificate. This is only set if issuer check debugging is enabled +it is used for status notification and is B<not> in itself an error. + +=item B<X509_V_ERR_KEYUSAGE_NO_CERTSIGN:key usage does not include certificate signing> + +the current candidate issuer certificate was rejected because its keyUsage +extension does not permit certificate signing. This is only set if issuer check +debugging is enabled it is used for status notification and is B<not> in itself +an error. + +=item B<X509_V_ERR_INVALID_EXTENSION: invalid or inconsistent certificate extension> + +A certificate extension had an invalid value (for example an incorrect +encoding) or some value inconsistent with other extensions. + + +=item B<X509_V_ERR_INVALID_POLICY_EXTENSION: invalid or inconsistent certificate policy extension> + +A certificate policies extension had an invalid value (for example an incorrect +encoding) or some value inconsistent with other extensions. This error only +occurs if policy processing is enabled. + +=item B<X509_V_ERR_NO_EXPLICIT_POLICY: no explicit policy> + +The verification flags were set to require and explicit policy but none was +present. + +=item B<X509_V_ERR_DIFFERENT_CRL_SCOPE: Different CRL scope> + +The only CRLs that could be found did not match the scope of the certificate. + +=item B<X509_V_ERR_UNSUPPORTED_EXTENSION_FEATURE: Unsupported extension feature> + +Some feature of a certificate extension is not supported. Unused. + +=item B<X509_V_ERR_PERMITTED_VIOLATION: permitted subtree violation> + +A name constraint violation occurred in the permitted subtrees. + +=item B<X509_V_ERR_EXCLUDED_VIOLATION: excluded subtree violation> + +A name constraint violation occurred in the excluded subtrees. + +=item B<X509_V_ERR_SUBTREE_MINMAX: name constraints minimum and maximum not supported> + +A certificate name constraints extension included a minimum or maximum field: +this is not supported. + +=item B<X509_V_ERR_UNSUPPORTED_CONSTRAINT_TYPE: unsupported name constraint type> + +An unsupported name constraint type was encountered. OpenSSL currently only +supports directory name, DNS name, email and URI types. + +=item B<X509_V_ERR_UNSUPPORTED_CONSTRAINT_SYNTAX: unsupported or invalid name constraint syntax> + +The format of the name constraint is not recognised: for example an email +address format of a form not mentioned in RFC3280. This could be caused by +a garbage extension or some new feature not currently supported. + +=item B<X509_V_ERR_CRL_PATH_VALIDATION_ERROR: CRL path validation error> + +An error occurred when attempting to verify the CRL path. This error can only +happen if extended CRL checking is enabled. + +=item B<X509_V_ERR_APPLICATION_VERIFICATION: application verification failure> + +an application specific error. This will never be returned unless explicitly +set by an application. + +=back + +=head1 NOTES + +The above functions should be used instead of directly referencing the fields +in the B<X509_VERIFY_CTX> structure. + +In versions of OpenSSL before 1.0 the current certificate returned by +X509_STORE_CTX_get_current_cert() was never B<NULL>. Applications should +check the return value before printing out any debugging information relating +to the current certificate. + +If an unrecognised error code is passed to X509_verify_cert_error_string() the +numerical value of the unknown code is returned in a static buffer. This is not +thread safe but will never happen unless an invalid code is passed. + +=head1 SEE ALSO + +L<X509_verify_cert(3)>, +L<X509_up_ref(3)>, +L<X509_free(3)>. + +=head1 COPYRIGHT + +Copyright 2009-2016 The OpenSSL Project Authors. All Rights Reserved. + +Licensed under the OpenSSL license (the "License"). You may not use +this file except in compliance with the License. You can obtain a copy +in the file LICENSE in the source distribution or at +L<https://www.openssl.org/source/license.html>. + +=cut |