1 files changed, 425 insertions, 0 deletions
diff --git a/openssl-1.1.0h/crypto/poly1305/asm/poly1305-mips.pl b/openssl-1.1.0h/crypto/poly1305/asm/poly1305-mips.pl
new file mode 100755
index 0000000..d2b3e90
--- /dev/null
+++ b/openssl-1.1.0h/crypto/poly1305/asm/poly1305-mips.pl
@@ -0,0 +1,425 @@
+#! /usr/bin/env perl
+# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# Poly1305 hash for MIPS64.
+#
+# May 2016
+#
+# Numbers are cycles per processed byte with poly1305_blocks alone.
+#
+#		IALU/gcc
+# R1x000	5.64/+120%	(big-endian)
+# Octeon II	3.80/+280%	(little-endian)
+
+######################################################################
+# There is a number of MIPS ABI in use, O32 and N32/64 are most
+# widely used. Then there is a new contender: NUBI. It appears that if
+# one picks the latter, it's possible to arrange code in ABI neutral
+# manner. Therefore let's stick to NUBI register layout:
+#
+($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
+($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
+($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
+#
+# The return value is placed in $a0. Following coding rules facilitate
+# interoperability:
+#
+# - never ever touch $tp, "thread pointer", former $gp [o32 can be
+#   excluded from the rule, because it's specified volatile];
+# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
+#   old code];
+# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
+#
+# For reference here is register layout for N32/64 MIPS ABIs:
+#
+# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
+# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
+# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
+# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
+#
+# <appro@openssl.org>
+#
+######################################################################
+
+$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+
+die "MIPS64 only" unless ($flavour =~ /64|n32/i);
+
+$v0 = ($flavour =~ /nubi/i) ? $a0 : $t0;
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x0003f000" : "0x00030000";
+
+($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
+($in0,$in1,$tmp0,$tmp1,$tmp2,$tmp3,$tmp4) = ($a4,$a5,$a6,$a7,$at,$t0,$t1);
+
+$code.=<<___;
+#ifdef MIPSEB
+# define MSB 0
+# define LSB 7
+#else
+# define MSB 7
+# define LSB 0
+#endif
+
+.text
+.set	noat
+.set	noreorder
+
+.align	5
+.globl	poly1305_init
+.ent	poly1305_init
+poly1305_init:
+	.frame	$sp,0,$ra
+	.set	reorder
+
+	sd	$zero,0($ctx)
+	sd	$zero,8($ctx)
+	sd	$zero,16($ctx)
+
+	beqz	$inp,.Lno_key
+
+	ldl	$in0,0+MSB($inp)
+	ldl	$in1,8+MSB($inp)
+	ldr	$in0,0+LSB($inp)
+	ldr	$in1,8+LSB($inp)
+#ifdef	MIPSEB
+# if defined(_MIPS_ARCH_MIPS64R2)
+	dsbh	$in0,$in0		# byte swap
+	 dsbh	$in1,$in1
+	dshd	$in0,$in0
+	 dshd	$in1,$in1
+# else
+	ori	$tmp0,$zero,0xFF
+	dsll	$tmp2,$tmp0,32
+	or	$tmp0,$tmp2		# 0x000000FF000000FF
+
+	and	$tmp1,$in0,$tmp0	# byte swap
+	 and	$tmp3,$in1,$tmp0
+	dsrl	$tmp2,$in0,24
+	 dsrl	$tmp4,$in1,24
+	dsll	$tmp1,24
+	 dsll	$tmp3,24
+	and	$tmp2,$tmp0
+	 and	$tmp4,$tmp0
+	dsll	$tmp0,8			# 0x0000FF000000FF00
+	or	$tmp1,$tmp2
+	 or	$tmp3,$tmp4
+	and	$tmp2,$in0,$tmp0
+	 and	$tmp4,$in1,$tmp0
+	dsrl	$in0,8
+	 dsrl	$in1,8
+	dsll	$tmp2,8
+	 dsll	$tmp4,8
+	and	$in0,$tmp0
+	 and	$in1,$tmp0
+	or	$tmp1,$tmp2
+	 or	$tmp3,$tmp4
+	or	$in0,$tmp1
+	 or	$in1,$tmp3
+	dsrl	$tmp1,$in0,32
+	 dsrl	$tmp3,$in1,32
+	dsll	$in0,32
+	 dsll	$in1,32
+	or	$in0,$tmp1
+	 or	$in1,$tmp3
+# endif
+#endif
+	li	$tmp0,1
+	dsll	$tmp0,32
+	daddiu	$tmp0,-63
+	dsll	$tmp0,28
+	daddiu	$tmp0,-1		# 0ffffffc0fffffff
+
+	and	$in0,$tmp0
+	daddiu	$tmp0,-3		# 0ffffffc0ffffffc
+	and	$in1,$tmp0
+
+	sd	$in0,24($ctx)
+	dsrl	$tmp0,$in1,2
+	sd	$in1,32($ctx)
+	daddu	$tmp0,$in1		# s1 = r1 + (r1 >> 2)
+	sd	$tmp0,40($ctx)
+
+.Lno_key:
+	li	$v0,0			# return 0
+	jr	$ra
+.end	poly1305_init
+___
+{
+my ($h0,$h1,$h2,$r0,$r1,$s1,$d0,$d1,$d2) =
+   ($s0,$s1,$s2,$s3,$s4,$s5,$in0,$in1,$t2);
+
+$code.=<<___;
+.align	5
+.globl	poly1305_blocks
+.ent	poly1305_blocks
+poly1305_blocks:
+	.set	noreorder
+	dsrl	$len,4			# number of complete blocks
+	bnez	$len,poly1305_blocks_internal
+	nop
+	jr	$ra
+	nop
+.end	poly1305_blocks
+
+.align	5
+.ent	poly1305_blocks_internal
+poly1305_blocks_internal:
+	.frame	$sp,6*8,$ra
+	.mask	$SAVED_REGS_MASK,-8
+	.set	noreorder
+	dsub	$sp,6*8
+	sd	$s5,40($sp)
+	sd	$s4,32($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
+	sd	$s3,24($sp)
+	sd	$s2,16($sp)
+	sd	$s1,8($sp)
+	sd	$s0,0($sp)
+___
+$code.=<<___;
+	.set	reorder
+
+	ld	$h0,0($ctx)		# load hash value
+	ld	$h1,8($ctx)
+	ld	$h2,16($ctx)
+
+	ld	$r0,24($ctx)		# load key
+	ld	$r1,32($ctx)
+	ld	$s1,40($ctx)
+
+.Loop:
+	ldl	$in0,0+MSB($inp)	# load input
+	ldl	$in1,8+MSB($inp)
+	ldr	$in0,0+LSB($inp)
+	daddiu	$len,-1
+	ldr	$in1,8+LSB($inp)
+	daddiu	$inp,16
+#ifdef	MIPSEB
+# if defined(_MIPS_ARCH_MIPS64R2)
+	dsbh	$in0,$in0		# byte swap
+	 dsbh	$in1,$in1
+	dshd	$in0,$in0
+	 dshd	$in1,$in1
+# else
+	ori	$tmp0,$zero,0xFF
+	dsll	$tmp2,$tmp0,32
+	or	$tmp0,$tmp2		# 0x000000FF000000FF
+
+	and	$tmp1,$in0,$tmp0	# byte swap
+	 and	$tmp3,$in1,$tmp0
+	dsrl	$tmp2,$in0,24
+	 dsrl	$tmp4,$in1,24
+	dsll	$tmp1,24
+	 dsll	$tmp3,24
+	and	$tmp2,$tmp0
+	 and	$tmp4,$tmp0
+	dsll	$tmp0,8			# 0x0000FF000000FF00
+	or	$tmp1,$tmp2
+	 or	$tmp3,$tmp4
+	and	$tmp2,$in0,$tmp0
+	 and	$tmp4,$in1,$tmp0
+	dsrl	$in0,8
+	 dsrl	$in1,8
+	dsll	$tmp2,8
+	 dsll	$tmp4,8
+	and	$in0,$tmp0
+	 and	$in1,$tmp0
+	or	$tmp1,$tmp2
+	 or	$tmp3,$tmp4
+	or	$in0,$tmp1
+	 or	$in1,$tmp3
+	dsrl	$tmp1,$in0,32
+	 dsrl	$tmp3,$in1,32
+	dsll	$in0,32
+	 dsll	$in1,32
+	or	$in0,$tmp1
+	 or	$in1,$tmp3
+# endif
+#endif
+	daddu	$h0,$in0		# accumulate input
+	daddu	$h1,$in1
+	sltu	$tmp0,$h0,$in0
+	sltu	$tmp1,$h1,$in1
+	daddu	$h1,$tmp0
+
+	dmultu	$r0,$h0			# h0*r0
+	 daddu	$h2,$padbit
+	 sltu	$tmp0,$h1,$tmp0
+	mflo	$d0
+	mfhi	$d1
+
+	dmultu	$s1,$h1			# h1*5*r1
+	 daddu	$tmp0,$tmp1
+	 daddu	$h2,$tmp0
+	mflo	$tmp0
+	mfhi	$tmp1
+
+	dmultu	$r1,$h0			# h0*r1
+	 daddu	$d0,$tmp0
+	 daddu	$d1,$tmp1
+	mflo	$tmp2
+	mfhi	$d2
+	 sltu	$tmp0,$d0,$tmp0
+	 daddu	$d1,$tmp0
+
+	dmultu	$r0,$h1			# h1*r0
+	 daddu	$d1,$tmp2
+	 sltu	$tmp2,$d1,$tmp2
+	mflo	$tmp0
+	mfhi	$tmp1
+	 daddu	$d2,$tmp2
+
+	dmultu	$s1,$h2			# h2*5*r1
+	 daddu	$d1,$tmp0
+	 daddu	$d2,$tmp1
+	mflo	$tmp2
+
+	dmultu	$r0,$h2			# h2*r0
+	 sltu	$tmp0,$d1,$tmp0
+	 daddu	$d2,$tmp0
+	mflo	$tmp3
+
+	daddu	$d1,$tmp2
+	daddu	$d2,$tmp3
+	sltu	$tmp2,$d1,$tmp2
+	daddu	$d2,$tmp2
+
+	li	$tmp0,-4		# final reduction
+	and	$tmp0,$d2
+	dsrl	$tmp1,$d2,2
+	andi	$h2,$d2,3
+	daddu	$tmp0,$tmp1
+	daddu	$h0,$d0,$tmp0
+	sltu	$tmp0,$h0,$tmp0
+	daddu	$h1,$d1,$tmp0
+	sltu	$tmp0,$h1,$tmp0
+	daddu	$h2,$h2,$tmp0
+
+	bnez	$len,.Loop
+
+	sd	$h0,0($ctx)		# store hash value
+	sd	$h1,8($ctx)
+	sd	$h2,16($ctx)
+
+	.set	noreorder
+	ld	$s5,40($sp)		# epilogue
+	ld	$s4,32($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi epilogue
+	ld	$s3,24($sp)
+	ld	$s2,16($sp)
+	ld	$s1,8($sp)
+	ld	$s0,0($sp)
+___
+$code.=<<___;
+	jr	$ra
+	dadd	$sp,6*8
+.end	poly1305_blocks_internal
+___
+}
+{
+my ($ctx,$mac,$nonce) = ($a0,$a1,$a2);
+
+$code.=<<___;
+.align	5
+.globl	poly1305_emit
+.ent	poly1305_emit
+poly1305_emit:
+	.frame	$sp,0,$ra
+	.set	reorder
+
+	ld	$tmp0,0($ctx)
+	ld	$tmp1,8($ctx)
+	ld	$tmp2,16($ctx)
+
+	daddiu	$in0,$tmp0,5		# compare to modulus
+	sltiu	$tmp3,$in0,5
+	daddu	$in1,$tmp1,$tmp3
+	sltu	$tmp3,$in1,$tmp3
+	daddu	$tmp2,$tmp2,$tmp3
+
+	dsrl	$tmp2,2			# see if it carried/borrowed
+	dsubu	$tmp2,$zero,$tmp2
+	nor	$tmp3,$zero,$tmp2
+
+	and	$in0,$tmp2
+	and	$tmp0,$tmp3
+	and	$in1,$tmp2
+	and	$tmp1,$tmp3
+	or	$in0,$tmp0
+	or	$in1,$tmp1
+
+	lwu	$tmp0,0($nonce)		# load nonce
+	lwu	$tmp1,4($nonce)
+	lwu	$tmp2,8($nonce)
+	lwu	$tmp3,12($nonce)
+	dsll	$tmp1,32
+	dsll	$tmp3,32
+	or	$tmp0,$tmp1
+	or	$tmp2,$tmp3
+
+	daddu	$in0,$tmp0		# accumulate nonce
+	daddu	$in1,$tmp2
+	sltu	$tmp0,$in0,$tmp0
+	daddu	$in1,$tmp0
+
+	dsrl	$tmp0,$in0,8		# write mac value
+	dsrl	$tmp1,$in0,16
+	dsrl	$tmp2,$in0,24
+	sb	$in0,0($mac)
+	dsrl	$tmp3,$in0,32
+	sb	$tmp0,1($mac)
+	dsrl	$tmp0,$in0,40
+	sb	$tmp1,2($mac)
+	dsrl	$tmp1,$in0,48
+	sb	$tmp2,3($mac)
+	dsrl	$tmp2,$in0,56
+	sb	$tmp3,4($mac)
+	dsrl	$tmp3,$in1,8
+	sb	$tmp0,5($mac)
+	dsrl	$tmp0,$in1,16
+	sb	$tmp1,6($mac)
+	dsrl	$tmp1,$in1,24
+	sb	$tmp2,7($mac)
+
+	sb	$in1,8($mac)
+	dsrl	$tmp2,$in1,32
+	sb	$tmp3,9($mac)
+	dsrl	$tmp3,$in1,40
+	sb	$tmp0,10($mac)
+	dsrl	$tmp0,$in1,48
+	sb	$tmp1,11($mac)
+	dsrl	$tmp1,$in1,56
+	sb	$tmp2,12($mac)
+	sb	$tmp3,13($mac)
+	sb	$tmp0,14($mac)
+	sb	$tmp1,15($mac)
+
+	jr	$ra
+.end	poly1305_emit
+.rdata
+.asciiz	"Poly1305 for MIPS64, CRYPTOGAMS by <appro\@openssl.org>"
+.align	2
+___
+}
+
+$output=pop and open STDOUT,">$output";
+print $code;
+close STDOUT;
+