diff options
Diffstat (limited to 'openssl-1.1.0h/crypto/perlasm/x86asm.pl')
| -rw-r--r-- | openssl-1.1.0h/crypto/perlasm/x86asm.pl | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/openssl-1.1.0h/crypto/perlasm/x86asm.pl b/openssl-1.1.0h/crypto/perlasm/x86asm.pl new file mode 100644 index 0000000..1ff46c9 --- /dev/null +++ b/openssl-1.1.0h/crypto/perlasm/x86asm.pl @@ -0,0 +1,310 @@ +#! /usr/bin/env perl +# Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. +# +# Licensed under the OpenSSL license (the "License"). You may not use +# this file except in compliance with the License. You can obtain a copy +# in the file LICENSE in the source distribution or at +# https://www.openssl.org/source/license.html + + +# require 'x86asm.pl'; +# &asm_init(<flavor>,"des-586.pl"[,$i386only]); +# &function_begin("foo"); +# ... +# &function_end("foo"); +# &asm_finish + +$out=(); +$i386=0; + +# AUTOLOAD is this context has quite unpleasant side effect, namely +# that typos in function calls effectively go to assembler output, +# but on the pros side we don't have to implement one subroutine per +# each opcode... +sub ::AUTOLOAD +{ my $opcode = $AUTOLOAD; + + die "more than 4 arguments passed to $opcode" if ($#_>3); + + $opcode =~ s/.*:://; + if ($opcode =~ /^push/) { $stack+=4; } + elsif ($opcode =~ /^pop/) { $stack-=4; } + + &generic($opcode,@_) or die "undefined subroutine \&$AUTOLOAD"; +} + +sub ::emit +{ my $opcode=shift; + + if ($#_==-1) { push(@out,"\t$opcode\n"); } + else { push(@out,"\t$opcode\t".join(',',@_)."\n"); } +} + +sub ::LB +{ $_[0] =~ m/^e?([a-d])x$/o or die "$_[0] does not have a 'low byte'"; + $1."l"; +} +sub ::HB +{ $_[0] =~ m/^e?([a-d])x$/o or die "$_[0] does not have a 'high byte'"; + $1."h"; +} +sub ::stack_push{ my $num=$_[0]*4; $stack+=$num; &sub("esp",$num); } +sub ::stack_pop { my $num=$_[0]*4; $stack-=$num; &add("esp",$num); } +sub ::blindpop { &pop($_[0]); $stack+=4; } +sub ::wparam { &DWP($stack+4*$_[0],"esp"); } +sub ::swtmp { &DWP(4*$_[0],"esp"); } + +sub ::bswap +{ if ($i386) # emulate bswap for i386 + { &comment("bswap @_"); + &xchg(&HB(@_),&LB(@_)); + &ror (@_,16); + &xchg(&HB(@_),&LB(@_)); + } + else + { &generic("bswap",@_); } +} +# These are made-up opcodes introduced over the years essentially +# by ignorance, just alias them to real ones... +sub ::movb { &mov(@_); } +sub ::xorb { &xor(@_); } +sub ::rotl { &rol(@_); } +sub ::rotr { &ror(@_); } +sub ::exch { &xchg(@_); } +sub ::halt { &hlt; } +sub ::movz { &movzx(@_); } +sub ::pushf { &pushfd; } +sub ::popf { &popfd; } + +# 3 argument instructions +sub ::movq +{ my($p1,$p2,$optimize)=@_; + + if ($optimize && $p1=~/^mm[0-7]$/ && $p2=~/^mm[0-7]$/) + # movq between mmx registers can sink Intel CPUs + { &::pshufw($p1,$p2,0xe4); } + else + { &::generic("movq",@_); } +} + +# SSE>2 instructions +my %regrm = ( "eax"=>0, "ecx"=>1, "edx"=>2, "ebx"=>3, + "esp"=>4, "ebp"=>5, "esi"=>6, "edi"=>7 ); +sub ::pextrd +{ my($dst,$src,$imm)=@_; + if ("$dst:$src" =~ /(e[a-dsd][ixp]):xmm([0-7])/) + { &::data_byte(0x66,0x0f,0x3a,0x16,0xc0|($2<<3)|$regrm{$1},$imm); } + else + { &::generic("pextrd",@_); } +} + +sub ::pinsrd +{ my($dst,$src,$imm)=@_; + if ("$dst:$src" =~ /xmm([0-7]):(e[a-dsd][ixp])/) + { &::data_byte(0x66,0x0f,0x3a,0x22,0xc0|($1<<3)|$regrm{$2},$imm); } + else + { &::generic("pinsrd",@_); } +} + +sub ::pshufb +{ my($dst,$src)=@_; + if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/) + { &data_byte(0x66,0x0f,0x38,0x00,0xc0|($1<<3)|$2); } + else + { &::generic("pshufb",@_); } +} + +sub ::palignr +{ my($dst,$src,$imm)=@_; + if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/) + { &::data_byte(0x66,0x0f,0x3a,0x0f,0xc0|($1<<3)|$2,$imm); } + else + { &::generic("palignr",@_); } +} + +sub ::pclmulqdq +{ my($dst,$src,$imm)=@_; + if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/) + { &::data_byte(0x66,0x0f,0x3a,0x44,0xc0|($1<<3)|$2,$imm); } + else + { &::generic("pclmulqdq",@_); } +} + +sub ::rdrand +{ my ($dst)=@_; + if ($dst =~ /(e[a-dsd][ixp])/) + { &::data_byte(0x0f,0xc7,0xf0|$regrm{$dst}); } + else + { &::generic("rdrand",@_); } +} + +sub ::rdseed +{ my ($dst)=@_; + if ($dst =~ /(e[a-dsd][ixp])/) + { &::data_byte(0x0f,0xc7,0xf8|$regrm{$dst}); } + else + { &::generic("rdrand",@_); } +} + +sub rxb { + local *opcode=shift; + my ($dst,$src1,$src2,$rxb)=@_; + + $rxb|=0x7<<5; + $rxb&=~(0x04<<5) if($dst>=8); + $rxb&=~(0x01<<5) if($src1>=8); + $rxb&=~(0x02<<5) if($src2>=8); + push @opcode,$rxb; +} + +sub ::vprotd +{ my $args=join(',',@_); + if ($args =~ /xmm([0-7]),xmm([0-7]),([x0-9a-f]+)/) + { my @opcode=(0x8f); + rxb(\@opcode,$1,$2,-1,0x08); + push @opcode,0x78,0xc2; + push @opcode,0xc0|($2&7)|(($1&7)<<3); # ModR/M + my $c=$3; + push @opcode,$c=~/^0/?oct($c):$c; + &::data_byte(@opcode); + } + else + { &::generic("vprotd",@_); } +} + +sub ::endbranch +{ + &::data_byte(0xf3,0x0f,0x1e,0xfb); +} + +# label management +$lbdecor="L"; # local label decoration, set by package +$label="000"; + +sub ::islabel # see is argument is a known label +{ my $i; + foreach $i (values %label) { return $i if ($i eq $_[0]); } + $label{$_[0]}; # can be undef +} + +sub ::label # instantiate a function-scope label +{ if (!defined($label{$_[0]})) + { $label{$_[0]}="${lbdecor}${label}${_[0]}"; $label++; } + $label{$_[0]}; +} + +sub ::LABEL # instantiate a file-scope label +{ $label{$_[0]}=$_[1] if (!defined($label{$_[0]})); + $label{$_[0]}; +} + +sub ::static_label { &::LABEL($_[0],$lbdecor.$_[0]); } + +sub ::set_label_B { push(@out,"@_:\n"); } +sub ::set_label +{ my $label=&::label($_[0]); + &::align($_[1]) if ($_[1]>1); + &::set_label_B($label); + $label; +} + +sub ::wipe_labels # wipes function-scope labels +{ foreach $i (keys %label) + { delete $label{$i} if ($label{$i} =~ /^\Q${lbdecor}\E[0-9]{3}/); } +} + +# subroutine management +sub ::function_begin +{ &function_begin_B(@_); + $stack=4; + &push("ebp"); + &push("ebx"); + &push("esi"); + &push("edi"); +} + +sub ::function_end +{ &pop("edi"); + &pop("esi"); + &pop("ebx"); + &pop("ebp"); + &ret(); + &function_end_B(@_); + $stack=0; + &wipe_labels(); +} + +sub ::function_end_A +{ &pop("edi"); + &pop("esi"); + &pop("ebx"); + &pop("ebp"); + &ret(); + $stack+=16; # readjust esp as if we didn't pop anything +} + +sub ::asciz +{ my @str=unpack("C*",shift); + push @str,0; + while ($#str>15) { + &data_byte(@str[0..15]); + foreach (0..15) { shift @str; } + } + &data_byte(@str) if (@str); +} + +sub ::asm_finish +{ &file_end(); + print @out; +} + +sub ::asm_init +{ my ($type,$fn,$cpu)=@_; + + $filename=$fn; + $i386=$cpu; + + $elf=$cpp=$coff=$aout=$macosx=$win32=$netware=$mwerks=$android=0; + if (($type eq "elf")) + { $elf=1; require "x86gas.pl"; } + elsif (($type eq "elf-1")) + { $elf=-1; require "x86gas.pl"; } + elsif (($type eq "a\.out")) + { $aout=1; require "x86gas.pl"; } + elsif (($type eq "coff" or $type eq "gaswin")) + { $coff=1; require "x86gas.pl"; } + elsif (($type eq "win32n")) + { $win32=1; require "x86nasm.pl"; } + elsif (($type eq "nw-nasm")) + { $netware=1; require "x86nasm.pl"; } + #elsif (($type eq "nw-mwasm")) + #{ $netware=1; $mwerks=1; require "x86nasm.pl"; } + elsif (($type eq "win32")) + { $win32=1; require "x86masm.pl"; } + elsif (($type eq "macosx")) + { $aout=1; $macosx=1; require "x86gas.pl"; } + elsif (($type eq "android")) + { $elf=1; $android=1; require "x86gas.pl"; } + else + { print STDERR <<"EOF"; +Pick one target type from + elf - Linux, FreeBSD, Solaris x86, etc. + a.out - DJGPP, elder OpenBSD, etc. + coff - GAS/COFF such as Win32 targets + win32n - Windows 95/Windows NT NASM format + nw-nasm - NetWare NASM format + macosx - Mac OS X +EOF + exit(1); + } + + $pic=0; + for (@ARGV) { $pic=1 if (/\-[fK]PIC/i); } + + $filename =~ s/\.pl$//; + &file($filename); +} + +sub ::hidden {} + +1; |