diff options
Diffstat (limited to 'openssl-1.1.0h/crypto/bn/asm/x86_64-gf2m.pl')
| -rw-r--r-- | openssl-1.1.0h/crypto/bn/asm/x86_64-gf2m.pl | 397 |
1 files changed, 397 insertions, 0 deletions
diff --git a/openssl-1.1.0h/crypto/bn/asm/x86_64-gf2m.pl b/openssl-1.1.0h/crypto/bn/asm/x86_64-gf2m.pl new file mode 100644 index 0000000..d962f62 --- /dev/null +++ b/openssl-1.1.0h/crypto/bn/asm/x86_64-gf2m.pl @@ -0,0 +1,397 @@ +#! /usr/bin/env perl +# Copyright 2011-2016 The OpenSSL Project Authors. All Rights Reserved. +# +# Licensed under the OpenSSL license (the "License"). You may not use +# this file except in compliance with the License. You can obtain a copy +# in the file LICENSE in the source distribution or at +# https://www.openssl.org/source/license.html + +# +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# May 2011 +# +# The module implements bn_GF2m_mul_2x2 polynomial multiplication used +# in bn_gf2m.c. It's kind of low-hanging mechanical port from C for +# the time being... Except that it has two code paths: code suitable +# for any x86_64 CPU and PCLMULQDQ one suitable for Westmere and +# later. Improvement varies from one benchmark and µ-arch to another. +# Vanilla code path is at most 20% faster than compiler-generated code +# [not very impressive], while PCLMULQDQ - whole 85%-160% better on +# 163- and 571-bit ECDH benchmarks on Intel CPUs. Keep in mind that +# these coefficients are not ones for bn_GF2m_mul_2x2 itself, as not +# all CPU time is burnt in it... + +$flavour = shift; +$output = shift; +if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } + +$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or +die "can't locate x86_64-xlate.pl"; + +open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""; +*STDOUT=*OUT; + +($lo,$hi)=("%rax","%rdx"); $a=$lo; +($i0,$i1)=("%rsi","%rdi"); +($t0,$t1)=("%rbx","%rcx"); +($b,$mask)=("%rbp","%r8"); +($a1,$a2,$a4,$a8,$a12,$a48)=map("%r$_",(9..15)); +($R,$Tx)=("%xmm0","%xmm1"); + +$code.=<<___; +.text + +.type _mul_1x1,\@abi-omnipotent +.align 16 +_mul_1x1: + sub \$128+8,%rsp + mov \$-1,$a1 + lea ($a,$a),$i0 + shr \$3,$a1 + lea (,$a,4),$i1 + and $a,$a1 # a1=a&0x1fffffffffffffff + lea (,$a,8),$a8 + sar \$63,$a # broadcast 63rd bit + lea ($a1,$a1),$a2 + sar \$63,$i0 # broadcast 62nd bit + lea (,$a1,4),$a4 + and $b,$a + sar \$63,$i1 # boardcast 61st bit + mov $a,$hi # $a is $lo + shl \$63,$lo + and $b,$i0 + shr \$1,$hi + mov $i0,$t1 + shl \$62,$i0 + and $b,$i1 + shr \$2,$t1 + xor $i0,$lo + mov $i1,$t0 + shl \$61,$i1 + xor $t1,$hi + shr \$3,$t0 + xor $i1,$lo + xor $t0,$hi + + mov $a1,$a12 + movq \$0,0(%rsp) # tab[0]=0 + xor $a2,$a12 # a1^a2 + mov $a1,8(%rsp) # tab[1]=a1 + mov $a4,$a48 + mov $a2,16(%rsp) # tab[2]=a2 + xor $a8,$a48 # a4^a8 + mov $a12,24(%rsp) # tab[3]=a1^a2 + + xor $a4,$a1 + mov $a4,32(%rsp) # tab[4]=a4 + xor $a4,$a2 + mov $a1,40(%rsp) # tab[5]=a1^a4 + xor $a4,$a12 + mov $a2,48(%rsp) # tab[6]=a2^a4 + xor $a48,$a1 # a1^a4^a4^a8=a1^a8 + mov $a12,56(%rsp) # tab[7]=a1^a2^a4 + xor $a48,$a2 # a2^a4^a4^a8=a1^a8 + + mov $a8,64(%rsp) # tab[8]=a8 + xor $a48,$a12 # a1^a2^a4^a4^a8=a1^a2^a8 + mov $a1,72(%rsp) # tab[9]=a1^a8 + xor $a4,$a1 # a1^a8^a4 + mov $a2,80(%rsp) # tab[10]=a2^a8 + xor $a4,$a2 # a2^a8^a4 + mov $a12,88(%rsp) # tab[11]=a1^a2^a8 + + xor $a4,$a12 # a1^a2^a8^a4 + mov $a48,96(%rsp) # tab[12]=a4^a8 + mov $mask,$i0 + mov $a1,104(%rsp) # tab[13]=a1^a4^a8 + and $b,$i0 + mov $a2,112(%rsp) # tab[14]=a2^a4^a8 + shr \$4,$b + mov $a12,120(%rsp) # tab[15]=a1^a2^a4^a8 + mov $mask,$i1 + and $b,$i1 + shr \$4,$b + + movq (%rsp,$i0,8),$R # half of calculations is done in SSE2 + mov $mask,$i0 + and $b,$i0 + shr \$4,$b +___ + for ($n=1;$n<8;$n++) { + $code.=<<___; + mov (%rsp,$i1,8),$t1 + mov $mask,$i1 + mov $t1,$t0 + shl \$`8*$n-4`,$t1 + and $b,$i1 + movq (%rsp,$i0,8),$Tx + shr \$`64-(8*$n-4)`,$t0 + xor $t1,$lo + pslldq \$$n,$Tx + mov $mask,$i0 + shr \$4,$b + xor $t0,$hi + and $b,$i0 + shr \$4,$b + pxor $Tx,$R +___ + } +$code.=<<___; + mov (%rsp,$i1,8),$t1 + mov $t1,$t0 + shl \$`8*$n-4`,$t1 + movq $R,$i0 + shr \$`64-(8*$n-4)`,$t0 + xor $t1,$lo + psrldq \$8,$R + xor $t0,$hi + movq $R,$i1 + xor $i0,$lo + xor $i1,$hi + + add \$128+8,%rsp + ret +.Lend_mul_1x1: +.size _mul_1x1,.-_mul_1x1 +___ + +($rp,$a1,$a0,$b1,$b0) = $win64? ("%rcx","%rdx","%r8", "%r9","%r10") : # Win64 order + ("%rdi","%rsi","%rdx","%rcx","%r8"); # Unix order + +$code.=<<___; +.extern OPENSSL_ia32cap_P +.globl bn_GF2m_mul_2x2 +.type bn_GF2m_mul_2x2,\@abi-omnipotent +.align 16 +bn_GF2m_mul_2x2: + mov OPENSSL_ia32cap_P(%rip),%rax + bt \$33,%rax + jnc .Lvanilla_mul_2x2 + + movq $a1,%xmm0 + movq $b1,%xmm1 + movq $a0,%xmm2 +___ +$code.=<<___ if ($win64); + movq 40(%rsp),%xmm3 +___ +$code.=<<___ if (!$win64); + movq $b0,%xmm3 +___ +$code.=<<___; + movdqa %xmm0,%xmm4 + movdqa %xmm1,%xmm5 + pclmulqdq \$0,%xmm1,%xmm0 # a1·b1 + pxor %xmm2,%xmm4 + pxor %xmm3,%xmm5 + pclmulqdq \$0,%xmm3,%xmm2 # a0·b0 + pclmulqdq \$0,%xmm5,%xmm4 # (a0+a1)·(b0+b1) + xorps %xmm0,%xmm4 + xorps %xmm2,%xmm4 # (a0+a1)·(b0+b1)-a0·b0-a1·b1 + movdqa %xmm4,%xmm5 + pslldq \$8,%xmm4 + psrldq \$8,%xmm5 + pxor %xmm4,%xmm2 + pxor %xmm5,%xmm0 + movdqu %xmm2,0($rp) + movdqu %xmm0,16($rp) + ret + +.align 16 +.Lvanilla_mul_2x2: + lea -8*17(%rsp),%rsp +___ +$code.=<<___ if ($win64); + mov `8*17+40`(%rsp),$b0 + mov %rdi,8*15(%rsp) + mov %rsi,8*16(%rsp) +___ +$code.=<<___; + mov %r14,8*10(%rsp) + mov %r13,8*11(%rsp) + mov %r12,8*12(%rsp) + mov %rbp,8*13(%rsp) + mov %rbx,8*14(%rsp) +.Lbody_mul_2x2: + mov $rp,32(%rsp) # save the arguments + mov $a1,40(%rsp) + mov $a0,48(%rsp) + mov $b1,56(%rsp) + mov $b0,64(%rsp) + + mov \$0xf,$mask + mov $a1,$a + mov $b1,$b + call _mul_1x1 # a1·b1 + mov $lo,16(%rsp) + mov $hi,24(%rsp) + + mov 48(%rsp),$a + mov 64(%rsp),$b + call _mul_1x1 # a0·b0 + mov $lo,0(%rsp) + mov $hi,8(%rsp) + + mov 40(%rsp),$a + mov 56(%rsp),$b + xor 48(%rsp),$a + xor 64(%rsp),$b + call _mul_1x1 # (a0+a1)·(b0+b1) +___ + @r=("%rbx","%rcx","%rdi","%rsi"); +$code.=<<___; + mov 0(%rsp),@r[0] + mov 8(%rsp),@r[1] + mov 16(%rsp),@r[2] + mov 24(%rsp),@r[3] + mov 32(%rsp),%rbp + + xor $hi,$lo + xor @r[1],$hi + xor @r[0],$lo + mov @r[0],0(%rbp) + xor @r[2],$hi + mov @r[3],24(%rbp) + xor @r[3],$lo + xor @r[3],$hi + xor $hi,$lo + mov $hi,16(%rbp) + mov $lo,8(%rbp) + + mov 8*10(%rsp),%r14 + mov 8*11(%rsp),%r13 + mov 8*12(%rsp),%r12 + mov 8*13(%rsp),%rbp + mov 8*14(%rsp),%rbx +___ +$code.=<<___ if ($win64); + mov 8*15(%rsp),%rdi + mov 8*16(%rsp),%rsi +___ +$code.=<<___; + lea 8*17(%rsp),%rsp + ret +.Lend_mul_2x2: +.size bn_GF2m_mul_2x2,.-bn_GF2m_mul_2x2 +.asciz "GF(2^m) Multiplication for x86_64, CRYPTOGAMS by <appro\@openssl.org>" +.align 16 +___ + +# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, +# CONTEXT *context,DISPATCHER_CONTEXT *disp) +if ($win64) { +$rec="%rcx"; +$frame="%rdx"; +$context="%r8"; +$disp="%r9"; + +$code.=<<___; +.extern __imp_RtlVirtualUnwind + +.type se_handler,\@abi-omnipotent +.align 16 +se_handler: + push %rsi + push %rdi + push %rbx + push %rbp + push %r12 + push %r13 + push %r14 + push %r15 + pushfq + sub \$64,%rsp + + mov 152($context),%rax # pull context->Rsp + mov 248($context),%rbx # pull context->Rip + + lea .Lbody_mul_2x2(%rip),%r10 + cmp %r10,%rbx # context->Rip<"prologue" label + jb .Lin_prologue + + mov 8*10(%rax),%r14 # mimic epilogue + mov 8*11(%rax),%r13 + mov 8*12(%rax),%r12 + mov 8*13(%rax),%rbp + mov 8*14(%rax),%rbx + mov 8*15(%rax),%rdi + mov 8*16(%rax),%rsi + + mov %rbx,144($context) # restore context->Rbx + mov %rbp,160($context) # restore context->Rbp + mov %rsi,168($context) # restore context->Rsi + mov %rdi,176($context) # restore context->Rdi + mov %r12,216($context) # restore context->R12 + mov %r13,224($context) # restore context->R13 + mov %r14,232($context) # restore context->R14 + +.Lin_prologue: + lea 8*17(%rax),%rax + mov %rax,152($context) # restore context->Rsp + + mov 40($disp),%rdi # disp->ContextRecord + mov $context,%rsi # context + mov \$154,%ecx # sizeof(CONTEXT) + .long 0xa548f3fc # cld; rep movsq + + mov $disp,%rsi + xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER + mov 8(%rsi),%rdx # arg2, disp->ImageBase + mov 0(%rsi),%r8 # arg3, disp->ControlPc + mov 16(%rsi),%r9 # arg4, disp->FunctionEntry + mov 40(%rsi),%r10 # disp->ContextRecord + lea 56(%rsi),%r11 # &disp->HandlerData + lea 24(%rsi),%r12 # &disp->EstablisherFrame + mov %r10,32(%rsp) # arg5 + mov %r11,40(%rsp) # arg6 + mov %r12,48(%rsp) # arg7 + mov %rcx,56(%rsp) # arg8, (NULL) + call *__imp_RtlVirtualUnwind(%rip) + + mov \$1,%eax # ExceptionContinueSearch + add \$64,%rsp + popfq + pop %r15 + pop %r14 + pop %r13 + pop %r12 + pop %rbp + pop %rbx + pop %rdi + pop %rsi + ret +.size se_handler,.-se_handler + +.section .pdata +.align 4 + .rva _mul_1x1 + .rva .Lend_mul_1x1 + .rva .LSEH_info_1x1 + + .rva .Lvanilla_mul_2x2 + .rva .Lend_mul_2x2 + .rva .LSEH_info_2x2 +.section .xdata +.align 8 +.LSEH_info_1x1: + .byte 0x01,0x07,0x02,0x00 + .byte 0x07,0x01,0x11,0x00 # sub rsp,128+8 +.LSEH_info_2x2: + .byte 9,0,0,0 + .rva se_handler +___ +} + +$code =~ s/\`([^\`]*)\`/eval($1)/gem; +print $code; +close STDOUT; |