/po/packages/

ae59f1d5667&showmsg=1'>Expand)Author 2024-04-03Switch order of the default substitute servers....The aim here is to improve the user experience. There's anecdotal evidence that the network performance for bordeaux is better compared to ci at least for some users, and I don't know of any issues with rate limiting or access restriction for bordeaux compared to ci. It also has IPv6 support. Additionally, bordeaux generally had more substitutes than ci, particularly for aarch64-linux and armhf-linux. This change will offer a very slight speedup for those substitutes that only bordeaux has. Bordeaux has been a default substitute server for nearly 3 years now and I think this change is overdue. I'm also hopeful that we'll be able to build on the testing regarding mirrors for bordeaux, and that'll allow potentially improving the hosting setup (through providing more redundancy) and further improving substitute fetching for users who currently have issues with substitute access. * config-daemon.ac: Switch substitute urls order. * doc/guix.texi: Ditto. * etc/guix-install.sh: Ditto. * gnu/installer/newt/network.scm (wait-service-online): Ditto. * guix/store.scm (%default-substitute-urls): Ditto. Change-Id: I4f6d93ae1fc8b03d80b47b18b5749a51f1fde17b Signed-off-by: Christopher Baines <mail@cbaines.net> Christopher Baines 2022-11-15installer: Report known-unsupported PCI devices....* gnu/installer/hardware.scm: New file. * gnu/local.mk (INSTALLER_MODULES): Add it. * po/guix/POTFILES.in: Add it. * gnu/installer.scm (installer-steps): Pass #:pci-database to the 'welcome' step procedure. * gnu/installer/newt.scm (welcome-page): Add #:pci-database and pass it to 'run-welcome-page'. * gnu/installer/newt/welcome.scm (check-hardware-support): Add #:pci-database. Enumerate unsupported PCI devices and run an error page when unsupported devices are found. (run-welcome-page): Add #:pci-database and pass it to 'check-hardware-support' and to the recursive call. * gnu/installer/record.scm (<installer>)[welcome-page]: Adjust comment. * doc/guix.texi (Hardware Considerations): Mention it. Ludovic Courtès 2022-11-15installer: Error page width is parameterized....* gnu/installer/newt/page.scm (run-error-page): Add #:width and honor it. Ludovic Courtès 2022-11-15installer: Warn about hardware support after the welcome page....This is a followup to 682639c107908426fe6bf0a1b8404b98b7820290, which added the uvesafb upfront, before welcome page had been displayed. * gnu/installer/newt/welcome.scm (check-hardware-support): New procedure. (run-welcome-page): Use it. Ludovic Courtès 2022-11-02installer: Skip the backtrace page on user abort....When the user aborts the installation because a core dump is discovered or the installation command failed, displaying the abort backtrace doesn't make much sense. Hide it when the abort condition is &user-abort-error and skip directly to the dump page. * gnu/installer/steps.scm (&user-abort-error): New variable. (user-abort-error?): New procedure. * gnu/installer/newt/final.scm (run-install-failed-page): Raise a user-abort-error. * gnu/installer/newt/welcome.scm (run-welcome-page): Ditto. * gnu/installer.scm (installer-program): Hide the backtrace page and directly propose to dump the report when the a &user-abort-error is raised. Mathieu Othacehe 2022-11-02installer: Add core dump support....Fixes: <https://issues.guix.gnu.org/58733> * gnu/installer.scm (installer-program): Enable core dump generation. * gnu/installer/dump.scm (%core-dump): New variable. (prepare-dump): Copy the core dump file. * gnu/installer/newt/welcome.scm (run-welcome-page): Propose to report an installation that previously generated a core dump. Mathieu Othacehe 2022-10-25installer: welcome: Warn when uvesafb gets used....There will be false positives: Because the Guix installer uses the kernel argument modprobe.blacklist=radeon,amdgpu and some AMD graphics actually work okay according to h-node, these users will get a false alarm. * gnu/installer/newt/welcome.scm (run-welcome-page): Warn before showing the welcome page. pelzflorian (Florian Pelz) 2022-10-20installer: Add a missing confirmation page before formatting....This is a follow-up of: <https://issues.guix.gnu.org/57232> * gnu/installer/newt/partition.scm (run-label-page): Add a confirmation page when dealing with an EFI installation. Mathieu Othacehe 2022-10-20installer: Propose the user to report a "guix system init" failure....* gnu/installer/newt/final.scm (run-install-failed-page): Add a "Report the failure" button. Mathieu Othacehe 2022-10-17installer: Factorize url-alive? in internet check....* gnu/installer/newt/network.scm (wait-service-online): Factorize url-alive? in internet check. Andrew Tropin 2022-10-17installer: Relax internet check availability criteria....Checks the availability of the mirror bordeaux.guix.gnu.org in addition to ci.guix.gnu.org. This allows to proceed the installation if the ci.guix.gnu.org is unavailable. * gnu/installer/newt/network.scm (wait-service-online): Relax internet check availability criteria. Signed-off-by: Andrew Tropin <andrew@trop.in> aleksandr barakin 2022-10-17guix: Fix typos....These typos were found and reported through weblate. * gnu/packages/audio.scm (wildmidi)[description]: Fix typo. * gnu/packages/games.scm (cgoban)[description]: Fix typo. * gnu/services/version-control.scm (gitolite-service-type)[description]: Fix typo. * gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full stop at end of title. * gnu/machine/ssh.scm (machine-ssh-configuration-system): Move punctuation outside of quotes. * guix/scripts/home.scm (process-action): Remove trailing space before newline. * guix/scripts/system.scm (show-help): Fix typo. * guix/scripts/environment.scm (with-store/maybe): Fix typo. Julien Lepiller 2022-10-13installer: partition: Add a confirmation page before formatting....Fixes: <https://issues.guix.gnu.org/57232>. * gnu/installer/newt/partition.scm (run-label-confirmation-page): New procedure. (run-label-page): Call the above procedure before proceeding. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Mathieu Othacehe 2022-09-22installer: Exit console-services page with abort-to-prompt....* gnu/installer/newt/services.scm (run-console-services-cbt-page): Do it. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-09-22installer: Return partitions with crypt password as step result....* gnu/installer/newt/partition.scm (run-partitioning-page): Do it. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-09-22installer: Move <secret> to utils and use it for crypt passwords....* gnu/installer/user.scm (<secret>, secret?, make-secret, secret-content): Move to utils.scm. * gnu/installer/utils.scm (<secret>, secret?, make-secret, secret-content): Moved from user.scm. * gnu/installer/newt/partition.scm (prompt-luks-passwords): Make password a <secret>. * gnu/installer/parted.scm (luks-format-and-open): Unwrap secret. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-04-06installer: user: Forbid root user creation....Forbid root user creation as it could lead to a system without any non-priviledged user accouts. Fixes: <https://issues.guix.gnu.org/54666>. * gnu/installer/newt/user.scm (run-user-add-page): Forbid it. Mathieu Othacehe 2022-02-02installer: Make dump archive creation optional and selective....* gnu/installer.scm (installer-program): Let the installer customize the dump archive. * gnu/installer/dump.scm (prepare-dump, make-dump): Split make-dump in prepare-dump, which copies the files necessary for the dump, and make-dump which creates the archive. * gnu/installer/record.scm (installer): Add report-page field. Change documented return value of exit-error. * gnu/installer/newt.scm (exit-error): Change arguments to be a string containing the error. Let the user choose between exiting and initiating a dump. (report-page): Add new variable. * gnu/installer/newt/page.scm (run-dump-page): New variable. * gnu/installer/newt/dump.scm: Delete it. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-02-02installer: Turn passwords into opaque records....* gnu/installer/user.scm (<secret>, secret?, make-secret, secret-content): Add opaque <secret> record that boxes its contents, with a custom printer that doesn't display anything. * gnu/installer/newt/user.scm (run-user-add-page, run-user-page): Box it. * gnu/installer/final.scm (create-user-database): Unbox it. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-02-02installer: Add error page when running external commands....* gnu/installer/newt.scm (newt-run-command): Add it. * gnu/installer/newt/page.scm (%ok-button, %exit-button, %default-buttons, make-newt-buttons, run-textbox-page): Add them. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-02-02installer: Use named prompt to abort or break installer steps....* gnu/installer/steps.scm (run-installer-steps): Set up 'installer-step prompt. * gnu/installer/newt/ethernet.scm (run-ethernet-page) * gnu/installer/newt/final.scm (run-config-display-page, run-install-failed-page) * gnu/installer/newt/keymap.scm (run-layout-page, run-variant-page) * gnu/installer/newt/locale.scm (run-language-page, run-territory-page, run-codeset-page, run-modifier-page, run-locale-page) * gnu/installer/newt/network.scm (run-technology-page, wait-service-online) * gnu/installer/newt/page.scm (run-listbox-selection-page, run-checkbox-tree-page) * gnu/installer/newt/partition.scm (button-exit-action) * gnu/installer/newt/services.scm (run-desktop-environments-cbt-page, run-networking-cbt-page, run-other-services-cbt-page, run-network-management-page) * gnu/installer/newt/timezone.scm (run-timezone-page) * gnu/installer/newt/user.scm (run-user-page) * gnu/installer/newt/welcome.scm (run-menu-page) * gnu/installer/newt/wifi.scm (run-wifi-page): Use the 'installer-step prompt to abort. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-02-02installer: Replace run-command by invoke in newt/page.scm....* gnu/installer/newt/page.scm (edit-file): Replace it. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-02-02installer: Fix run-file-textbox-page when edit-button is #f....* gnu/installer/newt/page.scm (run-file-textbox-page): Check if edit-button is #f. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-02-02installer: Use new installer-log-line everywhere....* gnu/installer.scm (installer-program) * gnu/installer/final.scm (install-locale) * gnu/installer/newt.scm (init) * gnu/installer/newt/final.scm (run-final-page) * gnu/installer/newt/page.scm (run-form-with-clients) * gnu/installer/newt/partition.scm (run-partitioning-page) * gnu/installer/parted.scm (eligible-devices, mkpart, luks-format-and-open, luks-close, mount-user-partitions, umount-user-partitions, free-parted): * gnu/installer/steps.scm (run-installer-steps): * gnu/installer/utils.scm (run-command, send-to-clients): Use it. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Josselin Poiret 2022-02-02installer: Add crash dump upload support....Suggested-by: Josselin Poiret <dev@jpoiret.xyz> * gnu/installer/dump.scm: New file. * gnu/installer/newt/dump.scm: New file. * gnu/local.mk (INSTALLER_MODULES): Add them. * gnu/installer/record.scm (<installer>)[dump-page]: New field. * gnu/installer/steps.scm (%current-result): New variable. (run-installer-steps): Update it. * gnu/installer.scm (installer-program): Add tar and gip to the installer path. Add guile-webutils and gnutls to the Guile extensions. Generate and send the crash dump report. * gnu/installer/newt.scm (exit-error): Add a report argument. Display the report id. (dump-page): New procedure. (newt-installer): Update it. Mathieu Othacehe 2022-01-14installer: Check if ci.guix.gnu.org can be reached....* gnu/installer.scm (installer-program): Add gnutls extension. * gnu/installer/newt/network.scm (wait-service-online): Check if the CI server can be reached. Mathieu Othacehe 2022-01-14installer: Ignore small devices....Filter the devices that are smaller than 2GiB in the device selection list. * gnu/installer/parted.scm (%min-device-size): New variable. (non-install-devices): Rename it ... (eligible-devices): ... this way. Filter the install device as well as the small devices. * gnu/installer/newt/partition.scm (run-partitioning-page): Adapt it. Mathieu Othacehe 2021-12-28installer: Recommend 'ntp-service-type' for non-graphical systems....We had several bug reports with a root cause of "the clock was incorrect" from users who used the installer to install a non-graphical Guix System. * gnu/installer/services.scm (%system-services): Add the ntp-service-type. * gnu/installer/newt/services.scm (run-system-administration-cbt-page): New variable. (run-services-page): Use run-system-administration-cbt-page when not installing a desktop. * gnu/installer/tests.scm (choose-services): Add and use a choose-misc-service? procedure. * gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add ntp-service-type. Leo Famulari 2021-12-28installer: Offer the CUPS printing service on a dedicated page....Currently, the installer page RUN-OTHER-SERVICES-CBT-PAGE offers to the user all installer services that are not of the types 'desktop', 'network-management', or 'networking'. Concretely, this means that it offers the CUPS printing service, because that is the only service of a different type defined in the installer. In later commits, we will add some services of a new type, and we only want them to be offered when the user is installing a non-graphical system. At least one of these new services (NTP) is part of %DESKTOP-SERVICES. If it was also offered on RUN-OTHER-SERVICES-CBT-PAGE, and the user had configured a system using %DESKTOP-SERVICES, the user could accidentally add NTP to their services twice, which is an error and would break installation. So, this commit makes the RUN-OTHER-SERVICES-CBT-PAGE be more specific about what services to offer. This makes it easier to discriminate between desktop and non-desktop installations, in terms of when a given service is offered. * gnu/installer/newt/services.scm (RUN-OTHER-SERVICES-CBT-PAGE): Rename to ... (RUN-PRINTING-SERVICES-CBT-PAGE): ... new variable, and select only 'document' services. (RUN-SERVICES-PAGE): Adjust accordingly. * gnu/installer/tests.scm (CHOOSE-SERVICES): Adjust accordingly. Leo Famulari 2021-10-21installer: Reorder file system type listbox....Recommending ext4 over btrfs is probably ill-advised nowadays. See the regular bug reports about running out of /gnu/store directory entries, for which the documented fix then breaks booting with GRUB. Instead, just list regular file systems alphabetically. We can bikeshed bcachefs later ;-) Move second-class file systems like NTFS to their own section at the end of the list. * gnu/packages/package-management.scm (run-fs-type-page): Reorder the LISTBOX-ITEMS. Tobias Geerinckx-Rice 2021-09-23installer: Support XFS....* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘xfs’ to the list box. * gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type) (partition-filesystem-user-type): Add ‘xfs’ mapping. (create-xfs-file-system): New procedure. (format-user-partitions): Use it. * gnu/installer.scm (set-installer-path): Add xfsprogs. Tobias Geerinckx-Rice 2021-06-30installer: Offer the CUPS printing service....* gnu/installer/services.scm (%system-services): Add CUPS. * gnu/installer/newt/services.scm (run-other-services-cbt-page): New procedure. (run-services-page): Call it last. Tobias Geerinckx-Rice 2021-06-29installer: Fix crash when deleting a free space partition....Fixes: <https://issues.guix.gnu.org/49126>. * gnu/installer/newt/partition.scm (run-disk-page): Fix the return value when removing a free space partition. Mathieu Othacehe 2021-06-12installer: Check partitions UUIDs....* gnu/installer/parted.scm (&cannot-read-uuid): New condition. (cannot-read-uuid?, cannot-read-uuid-partition): New procedures. (check-user-partitions): Check that all user-partitions have a valid UUID, raide the above condition otherwise. * gnu/installer/newt/partition.scm (run-disk-page): Run an error page if the &cannot-read-uuid condition is raised. Mathieu Othacehe 2021-06-12installer: Print user partitions....* gnu/installer/newt/partition.scm (run-partitioning-page): Print user-partitions to syslog. Mathieu Othacehe 2021-04-28installer: Force GPT disk label when UEFI is supported....* gnu/installer/newt/partition.scm (run-label-page): Force the GPT disk label when UEFI is supported. Mathieu Othacehe