/po/doc/

aa1350229442a9f'>ssh: Speed up RPCs by using #:nodelay....

Age	Commit message (Expand)	Author
2024-06-03	build: Use the po4a command for the translation generation....* configure.ac (Documentation translation): Remove the po4a-translate command. This command has been replaced by the po4a command and are not used from anywhere. * doc/local.mk ($(srcdir)/%D%/guix.%.texi, $(srcdir)/%D%/guix-cookbook.%.texi) ($(srcdir)/%D%/contributing.%.texi): Use the po4a command instead of the po4a-translate for the translation generation. This eliminates the warning of po4a-translate; "po4a-translate is deprecated. The unified po4a(1) program is more convenient and less error prone." (PO4A_PARAMS): Remove the Texinfo format option. This option is specified in the configuration file (po/doc/po4a.cfg). (dummy_pot): Add a variable for the temporary POT file location. Change-Id: I542b934c3c03b8701e9f86823191224f8b0ccf81 Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>	gemmaro
2024-06-03	build: Update the POT creation task with the po4a command....* configure.ac (Documentation translation): Add the po4a program and remove the po4a-updatepo program. The PO4A defined here can be used in Makefiles (e.g. po/doc/local.mk below). The po4a command integrates the functionality of po4a-updatepo and is currently recommended for use [1]. The po4a-updatepo command has been replaced by the po4a command and are not used from anywhere. * po/doc/local.mk (%D%/%.pot): Use a po4a command instead of the po4a-updatepo for the POT generation. This eliminates the warning of po4a-updatepo; "po4a-updatepo is deprecated. The unified po4a(1) program is more convenient and less error prone." Here, the file paths are passed using variables. This is because the po4a command needs to be executed for each language and each file. Dummy values are passed for those that are not needed to update the POT file. * po/doc/po4a.cfg: Add a po4a config file for the POT generation. The po4a command requires a configulation file. [1] https://po4a.org/man/man7/po4a.7.php.en#lbAS Change-Id: Ica39a0d1f77b6a64d37c592ac2e693319443d3c5 Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>	gemmaro
2024-05-25	configure.ac: Set default value for the 'prefix' variable....The Guix standard configuration uses a localstatedir of /var and a sysconfdir of /etc. To ease things for everyone, make the default values match that standard expected configuration. See <https://lists.gnu.org/archive/html/guix-devel/2024-05/msg00003.html> for a related discussion. * configure.ac: Default $prefix to '' unless already set. * doc/contributing.texi (Building from Git): Streamline doc. * doc/guix-cookbook.texi (Guix environment via direnv): Likewise. Reviewed-by: Ludovic Courtès <ludo@gnu.org> Change-Id: I23cd12b58a842d246fbc9fdc740311c573eb0212	Maxim Cournoyer
2024-04-19	maint: Resurrect running `make' from a tarball....This is a follow-up to commit 8b972da068708a8b17f3ab153ea940690ca49ca9 Makefile.am: Auto-configure Git on 'make'. * configure.ac (in_git_p): New conditional. * Makefile.am (nodist_noinst_DATA): Use it to only enable this when building from Git. Change-Id: I09a90a59a4933a8cdb04124467d38209171f2a57	Janneke Nieuwenhuizen
2023-10-22	teams: Adjust shebang to use 'guix repl'....This ensures the correct Guix dependencies are always available for the script. * etc/teams.scm.in: Rename to... * etc/teams.scm: ... this. Adjust shebang. * .gitignore: No longer ignore it. * configure.ac: Do not process it with AC_CONFIG_FILES. Reported-by: Clément Lassieur <clement@lassieur.org> Fixes: https://issues.guix.gnu.org/66605 Change-Id: I7a01750c6c5f0696b6c36b1e6caa9389d9e6822c	Maxim Cournoyer
2023-09-26	build: Add dependency on Git....* configure.ac: Check for ‘git’ and substitute ‘GIT’. * guix/config.scm.in (%git): New variable. * guix/self.scm (compiled-guix): Define ‘git’ and pass it to ‘make-config.scm’. (make-config.scm): Add #:git; emit a ‘%git’ variable. * doc/guix.texi (Requirements): Add it.	Ludovic Courtès
2022-07-03	etc: Add teams.scm....* etc/teams.scm.in: New file. * configure.ac: Generate executable. * .gitignore: Ignore generated file.	Ricardo Wurmus
2022-01-25	build: Require Guile >= 3.0.3....Fixes <https://issues.guix.gnu.org/53157>. Reported by Efraim Flashner <efraim@flashner.co.il>. * configure.ac: Require Guile >= 3.0.3. * doc/guix.texi (Requirements): Update accordingly.	Ludovic Courtès
2021-11-23	maint: "make dist" builds tarballs in 'ustar' format....This allows us to have file names longer than 99 characters. * configure.ac: Pass 'tar-ustar' to 'AM_INIT_AUTOMAKE'.	Ludovic Courtès
Lars-Dominik Braun
2020-05-28	doc: Remove explicit support for mips64el-linux....It's been a good run, but no one is maintaining the architecture. So long, and thanks for all the fish. * doc/guix.texi (GNU Distribution): Change text for mips64el-linux to denote it is deprecated. (Daemon Offload Setup): Change occurrences of mips64el-linux to aarch64-linux and adjust local code snippets. (Guix Environment)[cross-compilation]: Change mips64el-linux-gnu to aarch64-linux-gnu. (GNU Build System)(package-cross-derivation]: Same. (G-Expressions)[cross compilation]: Same. (Additional Build Options)[cross-compilation, build logs]: Same. (qemu-binfmt-service-type): Remove mips64el. * doc/contributing.texi (Submitting Patches): Same. * m4/guix.m4: (GUIX_ASSERT_SUPPORTED_SYSTEM): Remove mips64el-linux.	Efraim Flashner
2020-05-28	maint: Check whether Guile-Gcrypt is recent enough....Suggested by Danny Milosavljevic <dannym@scratchpost.org> in <https://bugs.gnu.org/41494>. * m4/guix.m4 (GUIX_CHECK_GUILE_GCRYPT): New macro. * configure.ac: Use it.	Ludovic Courtès
2020-02-22	build: Depend on guile-ssh 0.12.0...This is a followup to 35f35111678e6622301b414f3d464acb71e106bb. * m4/guix.m4 (GUIX_CHECK_GUILE_SSH): Check for userauth-gssapi! * doc/guix.texi: Document version requirement Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Lars-Dominik Braun
2019-08-17	build: 'GUIX_CHECK_GUILE_JSON' really checks for Guile-JSON 3.x....Until now the 'guile' process would always exit with 0, as long as Guile-JSON is installed, whether it's version 1 or version 3. * m4/guix.m4 (GUIX_CHECK_GUILE_JSON): Fix array syntax and remove catch-all 'match' clause.	Ludovic Courtès
2019-07-25	maint: Switch to Guile-JSON 3.x....Guile-JSON 3.x is incompatible with Guile-JSON 1.x, which we relied on until now: it maps JSON dictionaries to alists (instead of hash tables), and JSON arrays to vectors (instead of lists). This commit is about adjusting all the existing code to this new mapping. * m4/guix.m4 (GUIX_CHECK_GUILE_JSON): New macro. * configure.ac: Use it. * doc/guix.texi (Requirements): Mention the Guile-JSON version. * guix/git-download.scm (git-fetch)[guile-json]: Use GUILE-JSON-3. * guix/import/cpan.scm (string->license): Expect vectors instead of lists. (module->dist-name): Use 'json-fetch' instead of 'json-fetch-alist'. (cpan-fetch): Likewise. * guix/import/crate.scm (crate-fetch): Likewise, and call 'vector->list' for DEPS. * guix/import/gem.scm (rubygems-fetch): Likewise. * guix/import/json.scm (json-fetch-alist): Remove. * guix/import/pypi.scm (pypi-fetch): Use 'json-fetch' instead of 'json-fetch-alist'. (latest-source-release, latest-wheel-release): Call 'vector->list' on RELEASES. * guix/import/stackage.scm (stackage-lts-info-fetch): Use 'json-fetch' instead of 'json-fetch-alist'. (lts-package-version): Use 'vector->list'. * guix/import/utils.scm (hash-table->alist): Remove. (alist->package): Pass 'vector->list' on the inputs fields, and default to the empty vector. * guix/scripts/import/json.scm (guix-import-json): Remove call to 'hash-table->alist'. * guix/swh.scm (define-json-reader): Expect pair? or null? instead of hash-table?. [extract-field]: Use 'assoc-ref' instead of 'hash-ref'. (json->branches): Use 'map' instead of 'hash-map->list'. (json->checksums): Likewise. (json->directory-entries, origin-visits): Call 'vector->list' on the result of 'json->scm'. * tests/import-utils.scm ("alist->package with dependencies"): New test. * gnu/installer.scm (build-compiled-file)[builder]: Use GUILE-JSON-3. * gnu/installer.scm (installer-program)[installer-builder]: Likewise. * gnu/installer/locale.scm (iso639->iso639-languages): Use 'assoc-ref' instead of 'hash-ref', and pass vectors through 'vector->list'. (iso3166->iso3166-territories): Likewise. * gnu/system/vm.scm (system-docker-image)[build]: Use GUILE-JSON-3. * guix/docker.scm (manifest, config): Adjust for Guile-JSON 3. * guix/scripts/pack.scm (docker-image)[build]: Use GUILE-JSON-3. * guix/import/github.scm (fetch-releases-or-tags): Update docstring. (latest-released-version): Use 'assoc-ref' instead of 'hash-ref'. Pass the result of 'fetch-releases-or-tags' to 'vector->list'. * guix/import/launchpad.scm (latest-released-version): Likewise.	Ludovic Courtès