ice-type): New variable. * gnu/build/jami-service.scm: New file. * gnu/tests/data/jami-dummy-account.dat: Likewise. * gnu/tests/telephony.scm: Likewise. * gnu/local.mk (GNU_SYSTEM_MODULES): Register them. * Makefile.am (SCM_TESTS): Register the test file. (dist_patch_DATA): Register the new data file. * doc/guix.texi (Telephony Services): Document it.

Age	Commit message (Expand)	Author
2023-03-03	services: dbus: Deprecate 'dbus-service' procedure....* doc/guix.texi (Desktop Services): Replace with 'dbus-root-service-type'. Document dbus-configuration. * gnu/services/dbus.scm (dbus-service): Define with 'define-deprecated'. * gnu/services/desktop.scm (desktop-services-for-system): Replace with dbus-root-service-type. * gnu/system/install.scm (%installation-services): Ditto. * gnu/tests/base.scm (%avahi-os): Ditto. * gnu/tests/docker.scm (%docker-os): Ditto. * gnu/tests/lightdm.scm (minimal-desktop-services): Ditto. * gnu/tests/virtualization.scm (%libvirt-os): Ditto. Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Bruno Victal
2023-03-03	services: base: Deprecate 'udev-service' procedure....* doc/guix.texi (Base Services): Replace udev-service with udev-service-type. Document <udev-configuration>. Use @defun @-commands for udev-rules-service, udev-rule and file->udev-rule. * gnu/services/base.scm (udev-service): Deprecate procedure. * gnu/system/install.scm (%installation-services): Use udev-service-type. Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Bruno Victal
2023-03-03	services: base: Deprecate 'syslog-service' procedure....* doc/guix.texi (Base Services): Replace syslog-service with syslog-service-type. * gnu/services/base.scm (%default-syslog.conf): Place before <syslog-configuration>. (syslog-service-type): Set default value. (syslog-service): Deprecate procedure. (%base-services): Use syslog-service-type. * gnu/system/hurd.scm (%base-services/hurd): Ditto. * gnu/system/install.scm (%installation-services): Ditto. Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Bruno Victal
2023-03-03	services: base: Deprecate 'nscd-service' procedure....* doc/guix.texi (Application Setup): Compress @cindex entries. (Base Services): Compress @cindex entries. Delete %nscd-default-configuration. Replace 'nscd-service' with 'nscd-service-type'. * gnu/services/base.scm (%nscd-default-configuration): Deprecate variable. (nscd-service): Deprecate procedure. * gnu/system/install.scm (%installation-services): Use nscd-service-type. Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Bruno Victal
2023-03-03	services: base: Deprecate 'mingetty-service' procedure....* doc/guix.texi (Base Services): Replace mingetty-service with mingetty-service-type. * gnu/services/base.scm (mingetty-service): Deprecate procedure. Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Bruno Victal
2023-03-03	services: base: Deprecate 'login-service' procedure....* doc/guix.texi (Base Services): Replace with login-service-type. * gnu/services/base.scm (login-service): Deprecate procedure. * gnu/system/install.scm (%installation-services): Use login-service-type. Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Bruno Victal
2022-12-19	Merge branch 'version-1.4.0'	Ludovic Courtès
2022-12-15	install: Make sure uvesafb can be loaded....Fixes <https://issues.guix.gnu.org/60010>. Reported by pelzflorian (Florian Pelz) <pelzflorian@pelzflorian.de>. Previously, the 'modprobe' executable would try and fail to load the module from /lib/modules/*. Set 'LINUX_MODULE_DIRECTORY' to make sure 'modprobe' looks for the module in the right place. * gnu/system/install.scm (uvesafb-shepherd-service)[modprobe]: New variable. In 'start' method, invoke it instead of KMOD/bin/modprobe.	Ludovic Courtès
2022-12-11	install: Add lvm2-static system package....* gnu/system/install.scm (%installer-disk-utilities): Add lvm2-static.	Tobias Geerinckx-Rice
2022-12-06	install: Add missing e2fsprogs utility....* gnu/system/install.scm (%installer-disk-utilities): Add e2fsprogs. Reported-by: Adam Kandur <kefironpremise@gmail.com>	Maxim Cournoyer
2022-12-06	system: Rename and move %base-packages-disk-utilities....Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be used in another context, given that file systems now automatically pull their dependencies since commit 45eac6cdf5c8d9d7b0c564b105c790d2d2007799 (services: Add file system utilities to profile). * gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to... * gnu/system/install.scm (%installer-disk-utilities): ... this. (installation-os) [packages]: Adjust accordingly.	Maxim Cournoyer
2022-12-05	install: Add missing e2fsprogs utility....* gnu/system/install.scm (%installer-disk-utilities): Add e2fsprogs. Reported-by: Adam Kandur <kefironpremise@gmail.com>	Maxim Cournoyer
2022-12-05	system: Rename and move %base-packages-disk-utilities....Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be used in another context, given that file systems now automatically pull their dependencies since commit 45eac6cdf5c8d9d7b0c564b105c790d2d2007799 (services: Add file system utilities to profile). * gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to... * gnu/system/install.scm (%installer-disk-utilities): ... this. (installation-os) [packages]: Adjust accordingly.	Maxim Cournoyer
2022-09-16	system: install: Do not load amdgpu in the installer image....* gnu/system/install.scm (installation-os): Add amdgpu to modprobe.blacklist. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>	Antero Mejr
2022-08-09	maint: Use a pretty version string in ISO and VM images....* gnu/system/examples/vm-image.tmpl: Use the 'GUIX_DISPLAYED_VERSION' environment variable in 'label'. * gnu/system/install.scm (%installation-os): Likewise. * Makefile.am (release): Set 'GUIX_DISPLAYED_VERSION'.	Ludovic Courtès
2022-08-09	system: install: Always use 'current-guix'....Fixes <https://issues.guix.gnu.org/53210>. Reported by Mathieu Othacehe <othacehe@gnu.org>. * gnu/system/install.scm (%installation-services): Set 'guix' to use (current-guix) in 'guix-configuration'. * gnu/system/examples/vm-image.tmpl: Likewise. * gnu/tests/install.scm (operating-system-with-current-guix): Remove. (run-install, installation-os-for-gui-tests): Remove its uses. * Makefile.am (release): Remove intermediate use of 'update-guix-package.scm' and subsequent 'git commit' invocation.	Ludovic Courtès
2022-06-07	gnu: install: Add uvesafb service only on targets that support v86d....Fixes <https://issues.guix.gnu.org/55806>. * gnu/system/install.scm (%installation-services): Refactor into a procedure, so that it can capture the system it's installing for. Conditionally add uvesafb-service-type based on whether v86d is supported by the target architecture. (installation-os)[services]: Use the %installation-service procedure. (uvesafb-shepherd-service): Remove %host-type checks. Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>	Josselin Poiret
2022-05-18	services: Add more description fields....* gnu/services.scm (simple-service): Add 'description' field. * gnu/services/base.scm (udev-rules-service): Likewise. * gnu/system/install.scm (configuration-template-service-type): Likewise. * gnu/tests.scm (marionette-service-type): Likewise.	Ludovic Courtès
2021-12-12	services: Define '%loopback-static-networking'....* gnu/services/base.scm (%loopback-static-networking): New variable. (%base-services): Use it. * gnu/system/hurd.scm (%base-services/hurd): Use it. * gnu/system/install.scm (%installation-services): Use it. * doc/guix.texi (Networking Setup): Document it.	Ludovic Courtès
2021-12-12	services: static-networking: Change interface to mimic netlink....* gnu/services/base.scm (<static-networking>)[interface, ip, netmask] [gateway]: Remove. [addresses, links, routes]: New fields. [requirement]: Default to '(udev). (<network-address>, <network-link>, <network-route>): New record types. (ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove. (ipv6-address?, cidr->netmask, ip+netmask->cidr) (network-set-up/hurd, network-tear-down/hurd) (network-set-up/linux, network-tear-down/linux) (static-networking->hurd-pfinet-options): New procedures. (static-networking-shepherd-service): New procedure. (static-networking-shepherd-services): Rewrite in terms of the above. (static-networking-service): Deprecate. Adjust to new 'static-networking' API. (%base-services): Likewise. * gnu/system/install.scm (%installation-services): Likewise. * gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate 'loopback' from 'networking'. * gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove "servers/socket/2". * gnu/tests/networking.scm (run-openvswitch-test)["networking has started on ovs0"]: Check for 'networking instead of 'networking-ovs0, which is no longer provided. * doc/guix.texi (Networking Setup): Document the new interface. Remove documentation of 'static-networking-service'. (Virtualization Services): Change Ganeti example to use the new interface.	Ludovic Courtès
2021-08-29	Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new 'targets' one instead. * doc/guix-cookbook.texi<target>: Replace by 'targets'. * gnu/bootloader/grub.scm: Likewise. * gnu/installer/parted.scm: Likewise. * gnu/machine/digital-ocean.scm: Likewise. * gnu/system/examples/asus-c201.tmpl: Likewise * gnu/system/examples/bare-bones.tmpl: Likewise * gnu/system/examples/bare-hurd.tmpl: Likewise * gnu/system/examples/beaglebone-black.tmpl: Likewise * gnu/system/examples/desktop.tmpl: Likewise * gnu/system/examples/docker-image.tmpl: Likewise * gnu/system/examples/lightweight-desktop.tmpl: Likewise * gnu/system/examples/vm-image.tmpl: Likewise * gnu/system/examples/yggdrasil.tmpl: Likewise * gnu/system/hurd.scm: Likewise * gnu/system/images/hurd.scm: Likewise * gnu/system/images/novena.scm: Likewise * gnu/system/images/pine64.scm: Likewise * gnu/system/images/pinebook-pro.scm: Likewise * gnu/system/images/rock64.scm: Likewise * gnu/system/install.scm: Likewise * gnu/system/vm.scm: Likewise * gnu/tests.scm: Likewise * gnu/tests/ganeti.scm: Likewise * gnu/tests/install.scm: Likewise * gnu/tests/nfs.scm: Likewise * gnu/tests/telephony.scm: Likewise * tests/boot-parameters.scm: Likewise * tests/system.scm: Likewise	Maxim Cournoyer
2021-08-12	system: install, hurd: Use 'setuid-programs'....This is a followup to a7ac19851baab3fbcc40c4b2cf5b00a6ac9cd2f3. * gnu/system/install.scm (installation-os)[setuid-programs]: Use 'setuid-program'. * gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.	Ludovic Courtès
Maxim Cournoyer
2021-06-29	services: configuration: Allow specifying prefix for serializer names....Sometimes two configurations might have the same types for their field values, but the values might be serialized in two completely different ways (e.g. because the two programs have different configuration languages). An example of this would be the ‘serialize-boolean’ procedure in (gnu services mail) and (gnu services getmail). They both serialize a boolean value, but because the Dovecot’s configuration language has a different syntax to the configuration language for Getmail, two different procedures have to be defined. One way to workaround this would be to specify custom serializers for many fields in order to separate the serialization of the values that have the same type but serialize in different ways. This could get very tedious, especially if there are many configurations in the same module. Another way would be to move one of the configurations to its own module, like what was done with (gnu services getmail). However, this would mean that there would be multiple modules containing configurations for related programs, e.g. we have (gnu services mail) and (gnu services getmail), it doesn’t make much sense to keep the Getmail configuration in its own module. This patch will allow one to write something like this: (define-configuration foo-configuration (bar (string "bob") "Option bar.") (prefix bar-)) and the value of the ‘bar’ field would be serialized using a procedure named ‘bar-serialize-string’ instead of just ‘serialize-string’. * gnu/services/configuration.scm (define-maybe-helper): Accept ‘prefix’ argument for using serializer with custom prefix. (define-maybe): Pattern match on ‘prefix’ literal. (define-configuration-helper): Accept ‘prefix’ argument for using serializer with custom prefix. (define-configuration): Pattern match on ‘prefix’ literal. * tests/services/configuration.scm ("serialize-configuration with prefix"): New test. Signed-off-by: Ludovic Courtès <ludo@gnu.org>	Xinglu Chen
2021-05-17	services: configuration: Add a define-maybe/no-serialization syntax....Before this change, using define-maybe along define-configuration with the no-serialization syntactic keyword would result in the following warning: warning: possibly unbound variable `VARIABLE-NAME' This change introduces the define-maybe/no-serialization variant that does away with defining a serialization helper procedure, which makes it possible to avoid the above warning. * gnu/services/configuration.scm (define-maybe/no-serialization): New syntax. (define-maybe-helper): New procedure. (define-maybe): Define syntax using the above procedure. * tests/services/configuration.scm (tests): Fix module name. (custom-number-serializer): Do not print to standard output. (maybe-number?, serialize-maybe-number): New procedures defined via the define-maybe macro. (config-with-maybe-number): New configuration. (serialize-number): New procedure. ("maybe value serialization"): New test. (maybe-string?): New procedure defined via the define-maybe/no-serialization macro. (config-with-maybe-string/no-serialization): New configuration. ("maybe value without serialization no procedure bound"): New test.	Maxim Cournoyer
2021-05-08	services: configuration: Add tests....* tests/services/configuration.scm: New file. * Makefile.am (SCM_TESTS): Register it.	Maxim Cournoyer
2021-02-12	services: Add transmission-daemon service....* gnu/services/file-sharing.scm: New file. * gnu/local.mk (GNU_SYSTEM_MODULES): Add it. * po/packages/POTFILES.in: Add it. * tests/services/file-sharing.scm: New file. * Makefile.am (SCM_TESTS): Add it. * doc/guix.texi (File-Sharing Services): New section. Signed-off-by: 宋文武 <iyzsong@member.fsf.org>	Simon South
2020-08-02	services: Add zram-device-service....* gnu/services/linux.scm (<zram-device-configuration>): New record. (zram-device-service-type): New variable. * doc/guix.texi (Linux Services): Document it. * tests/services/linux.scm (zram-swap-device-test): New tests.	Efraim Flashner