;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013, 2014, 2015, 2016, 2019, 2020 Andreas Enge ;;; Copyright © 2013 Nikita Karetnikov ;;; Copyright © 2014, 2016, 2017 John Darrington ;;; Copyright © 2014-2022 Eric Bavier ;;; Copyright © 2014 Federico Beffa ;;; Copyright © 2014 Mathieu Lirzin ;;; Copyright © 2015–2022 Ricardo Wurmus ;;; Copyright © 2015 Sou Bunnbu ;;; Copyright © 2015, 2018 Mark H Weaver ;;; Copyright © 2015-2022 Efraim Flashner ;;; Copyright © 2015 Fabian Harfert ;;; Copyright © 2016 Roel Janssen ;;; Copyright © 2016, 2018, 2020, 2021 Kei Kebreau ;;; Copyright © 2016-2022 Ludovic Courtès ;;; Copyright © 2016 Leo Famulari ;;; Copyright © 2016, 2017 Thomas Danckaert ;;; Copyright © 2017, 2018, 2019, 2020, 2021 Paul Garlick ;;; Copyright © 2017 Nikita ;;; Copyright © 2017 Ben Woodcroft ;;; Copyright © 2017 Theodoros Foradis ;;; Copyright © 2017, 2019, 2022 Arun Isaac ;;; Copyright © 2017–2021 Tobias Geerinckx-Rice ;;; Copyright © 2017 Dave Love ;;; Copyright © 2018, 2019, 2020, 2021, 2022 Jan (janneke) Nieuwenhuizen ;;; Copyright © 2018 Joshua Sierles, Nextjournal ;;; Copyright © 2018 Nadya Voronova ;;; Copyright © 2018 Adam Massmann ;;; Copyright © 2018, 2020, 2021 Marius Bakke ;;; Copyright © 2018 Eric Brown ;;; Copyright © 2018, 2021 Julien Lepiller ;;; Copyright © 2018 Amin Bandali ;;; Copyright © 2019, 2021, 2022 Nicolas Goaziou ;;; Copyright © 2019 Steve Sprang ;;; Copyright © 2019 Robert Smith ;;; Copyright © 2020 Jakub Kądziołka ;;; Copyright © 2020–2022 Felix Gruber ;;; Copyright © 2020 R Veera Kumar ;;; Copyright © 2020 Vincent Legoll ;;; Copyright © 2020 Nicolò Balzarotti ;;; Copyright © 2020 B. Wilson ;;; Copyright © 2020, 2021 Vinicius Monego ;;; Copyright © 2020 Simon Tournier ;;; Copyright © 2020 Martin Becze ;;; Copyright © 2021 Gerd Heber ;;; Copyright © 2021 Franck Pérignon ;;; Copyright © 2021 Philip McGrath ;;; Copyright © 2021, 2022 Paul A. Patience ;;; Copyright © 2021 Ivan Gankevich ;;; Copyright © 2021 Jean-Baptiste Volatier ;;; Copyright © 2021 Guillaume Le Vaillant ;;; Copyright © 2021 Pierre-Antoine Bouttier ;;; Copyright © 2022 Zhu Zihao ;;; Copyright © 2022 Sharlatan Hellseher ;;; Copyright © 2022 Philip McGrath ;;; Copyright © 2022 Marek Felšöci ;;; Copyright © 2022 vicvbcun ;;; ;;; This file is part of GNU Guix. ;;; ;;; GNU Guix is free software; you can redistribute it and/or modify it ;;; under the terms of the GNU General Public License as published by ;;; the Free Software Foundation; either version 3 of the License, or (at ;;; your option) any later version. ;;; ;;; GNU Guix is distributed in the hope that it will be useful, but ;;; WITHOUT ANY WARRANTY; without even the implied warranty of ;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;;; GNU General Public License for more details. ;;; ;;; You should have received a copy of the GNU General Public License ;;; along with GNU Guix. If not, see . (define-module (gnu packages maths) #:use-module (ice-9 regex) #:use-module (ice-9 match) #:use-module (gnu packages) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix gexp) #:use-module (guix packages) #:use-module (guix download) #:use-module (guix git-download) #:use-module (guix gexp) #:use-module (guix utils) #:use-module ((guix build utils) #:select (alist-replace)) #:use-module (guix build-system cmake) #:use-module (guix build-system glib-or-gtk) #:use-module (guix build-system gnu) #:use-module (guix build-system meson) #:use-module (guix build-system ocaml) #:use-module (guix build-system perl) #:use-module (guix build-system python) #:use-module (guix build-system ruby) #:use-module (gnu packages algebra) #:use-module (gnu packages audio) #:use-module (gnu packages autotools) #:use-module (gnu packages base) #:use-module (gnu packages bash) #:use-module (gnu packages bison) #:use-module (gnu packages boost) #:use-module (gnu packages check) #:use-module (gnu packages cmake) #:use-module (gnu packages compression) #:use-module (gnu packages coq) #:use-module (gnu packages curl) #:use-module (gnu packages cyrus-sasl) #:use-module (gnu packages datamash) #:use-module (gnu packages dbm) #:use-module (gnu packages documentation) #:use-module (gnu packages elf) #:use-module (gnu packages emacs) #:use-module (gnu packages file) #:use-module (gnu packages flex) #:use-module (gnu packages fltk) #:use-module (gnu packages fontutils) #:use-module (gnu packages gettext) #:use-module (gnu packages gcc) #:use-module (gnu packages gd) #:use-module (gnu packages ghostscript) #:use-module (gnu packages glib) #:use-module (gnu packages graphviz) #:use-module (gnu packages gtk) #:use-module (gnu packages icu4c) #:use-module (gnu packages image) #:use-module (gnu packages java) #:use-module (gnu packages less) #:use-module (gnu packages lisp) #:use-module (gnu packages linux) #:use-module (gnu packages llvm) #:use-module (gnu packages logging) #:use-module (gnu packages lua) #:use-module (gnu packages gnome) #:use-module (gnu packages guile) #:use-module (gnu packages xorg) #:use-module (gnu packages gl) #:use-module (gnu packages imagemagick) #:use-module (gnu packages m4) #:use-module (gnu packages mpi) #:use-module (gnu packages multiprecision) #:use-module (gnu packages ncurses) #:use-module (gnu packages netpbm) #:use-module (gnu packages ocaml) #:use-module (gnu packages onc-rpc) #:use-module (gnu packages parallel) #:use-module (gnu packages pcre) #:use-module (gnu packages popt) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) #:use-module (gnu packages pulseaudio) #:use-module (gnu packages python) #:use-module (gnu packages python-web) #:use-module (gnu packages python-xyz) #:use-module (gnu packages qt) #:use-module (gnu packages readline) #:use-module (gnu packages ruby) #:use-module (gnu packages tbb) #:use-module (gnu packages scheme) #:use-module (gnu packages serialization) #:use-module (gnu packages shells) #:use-module (gnu packages sphinx) #:use-module (gnu packages swig) #:use-module (gnu packages tcl) #:use-module (gnu packages texinfo) #:use-module (gnu packages tex) #:use-module (gnu packages tls) #:use-module (gnu packages version-control) #:use-module (gnu packages wxwidgets) #:use-module (gnu packages xml) #:use-module (srfi srfi-1) #:use-module (srfi srfi-26)) (define-public aris (package (name "aris") (version "2.2") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/" name "/" name "-" version ".tar.gz")) (sha256 (base32 "1q1887ryqdr9sn0522hc7p16kqwlxxyz5dkmma8ar2nxplhgll7q")))) (build-system gnu-build-system) (inputs (list gtk+ libxml2)) (native-inputs (list pkg-config)) (arguments `(#:configure-flags '("CFLAGS=-O2 -g -fcommon"))) (synopsis "Natural deduction first-order logic interface") (description "Aris is a program for performing logical proofs. It supports propositional and predicate logic, as well as Boolean algebra and arithmetical logic. In addition to its predefined inference and equivalence rules, Aris also supports references to older proofs. Its use of standard logical symbols and its natural deduction interface make it easy to use for beginners.") (license license:gpl3+) (home-page "https://www.gnu.org/software/aris/"))) (define-public bitwise (package (name "bitwise") (version "0.42") (source (origin (method url-fetch) (uri (string-append "https://github.com/mellowcandle/bitwise" "/releases/download/v" version "/bitwise-v" version ".tar.gz")) (sha256 (base32 "1lniw4bsb5qs5ybf018qllf95pzixb1q3lvybzl4k3xz8zpkrm6k")))) (build-system gnu-build-system) (inputs (list ncurses readline)) (native-inputs (list cunit pkg-config)) (synopsis "Terminal based bit manipulator in ncurses") (description "Bitwise is a multi base interactive calculator supporting dynamic base conversion and bit manipulation. It's a handy tool for low level hackers, kernel developers and device drivers developers. Some of the features include: @itemize @item Interactive ncurses interface. @item Command line calculator supporting all bitwise operations. @item Individual bit manipulator. @item Bitwise operations such as NOT, OR, AND, XOR, and shifts. @end itemize") (license license:gpl3+) (home-page "https://github.com/mellowcandle/bitwise/"))) (define-public c-graph (package (name "c-graph") (version "2.0.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/c-graph/c-graph-" version ".tar.gz")) (sha256 (base32 "092412jzxy6wdvpk96pfj499hpmaww8xllavbvlqspfpr7ips9id")))) (build-system gnu-build-system) (inputs (list gfortran)) (synopsis "Visualizing and demonstrating convolution") (description "GNU C-Graph is a tool for demonstrating the theory of convolution. Thus, it can serve as an excellent aid to students of signal and systems theory in visualizing the convolution process. Rather than forcing the student to write code, the program offers an intuitive interface with interactive dialogs to guide them.") (license license:gpl3+) (home-page "https://www.gnu.org/software/c-graph/"))) (define-public coda (package (name "coda") (version "2.19") (source (origin (method url-fetch) (uri (string-append "https://github.com/stcorp/coda/releases/download/" version "/coda-" version ".tar.gz")) (sha256 (base32 "1fbxd2afm7dshd92p10yy8dwbr9gc1h1fmnnnmr7d0c5lnw80245")) (patches (search-patches "coda-use-system-libs.patch")) (modules '((guix build utils))) (snippet ;; Make sure we don't use the bundled software. '(begin (for-each (lambda (d) (delete-file-recursively (string-append "libcoda/" d))) '("zlib" "pcre" "expat")) #t)))) (native-inputs `(("fortran" ,gfortran) ("python" ,python) ("python-numpy" ,python-numpy))) (inputs `(("zlib" ,zlib) ("pcre" ,pcre) ("expat" ,expat) ("hdf4" ,hdf4-alt) ("hdf5" ,hdf5))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--with-hdf4" "--with-hdf5" "--enable-python" "LIBS= -lz -lpcre -lexpat"))) (synopsis "Common interface to various earth observation data formats") (description "The Common Data Access toolbox (CODA) provides a set of interfaces for reading remote sensing data from earth observation data files. It consists of command line applications and interfaces to the C, Fortran, Python, and Java programming languages.") (home-page "https://stcorp.nl/coda") (license license:gpl2+))) (define-public qhull (package (name "qhull") (version "2020.2") (source (origin (method url-fetch) (uri (string-append "http://www.qhull.org/download/qhull-" (car (string-split version #\.)) "-src-8.0.2.tgz")) (sha256 (base32 "0zlbhg0lb6j60188c2xhcrvviskr079552icjldqhy1jhgmxghmm")))) (build-system cmake-build-system) (arguments `(#:configure-flags '("-DLINK_APPS_SHARED=ON" "-DCMAKE_POSITION_INDEPENDENT_CODE=ON"))) (synopsis "Calculate convex hulls and related structures") (description "@code{Qhull} computes the convex hull, Delaunay triangulation, Voronoi diagram, halfspace intersection about a point, furthest-site Delaunay triangulation, and furthest-site Voronoi diagram. The source code runs in 2-d, 3-d, 4-d, and higher dimensions. @code{Qhull} implements the Quickhull algorithm for computing the convex hull. It handles roundoff errors from floating point arithmetic. It computes volumes, surface areas, and approximations to the convex hull. @code{Qhull} does not support triangulation of non-convex surfaces, mesh generation of non-convex objects, medium-sized inputs in 9-D and higher, alpha shapes, weighted Voronoi diagrams, Voronoi volumes, or constrained Delaunay triangulations.") (home-page "http://qhull.org") (license (license:non-copyleft "file://COPYING.txt" "See COPYING in the distribution.")))) (define-public python-cvxopt (package (name "python-cvxopt") (version "1.2.7") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/cvxopt/cvxopt") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "114z34wwx1bsv4q6xj9p5q99dffgnj9s4i4arx10g191xq9q8i5y")))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'find-libraries (lambda* (#:key inputs #:allow-other-keys) (setenv "CVXOPT_BLAS_LIB" "openblas") (setenv "CVXOPT_BUILD_FFTW" "1") (setenv "CVXOPT_BUILD_GLPK" "1") (setenv "CVXOPT_BUILD_GSL" "1") #t))))) (inputs (list fftw glpk gsl lapack openblas suitesparse)) (home-page "https://www.cvxopt.org") (synopsis "Python library for convex optimization") (description "CVXOPT is a package for convex optimization based on the Python programming language. Its main purpose is to make the development of software for convex optimization applications straightforward by building on Python’s extensive standard library and on the strengths of Python as a high-level programming language.") (license license:gpl3+))) (define-public units (package (name "units") (version "2.21") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/units/units-" version ".tar.gz")) (sha256 (base32 "1bybhqs4yrly9myb5maz3kdmf8k4fhk2m1d5cbcryn40z6lq0gkc")))) (build-system gnu-build-system) (inputs `(("readline" ,readline) ("python" ,python-wrapper) ;for 'units_cur' script ("python-requests" ,python-requests))) (arguments `(#:phases (modify-phases %standard-phases (add-after 'install 'wrap-units_cur (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (wrap-program (string-append bin "/units_cur") `("GUIX_PYTHONPATH" ":" prefix ,(search-path-as-string->list (getenv "GUIX_PYTHONPATH")))) #t)))))) (synopsis "Conversion between thousands of scales") (description "GNU Units converts numeric quantities between units of measure. It can handle scale changes through adaptive usage of standard scale prefixes (micro-, kilo-, etc.). It can also handle nonlinear conversions such as Fahrenheit to Celsius. Its interpreter is powerful enough to be used effectively as a scientific calculator.") (license license:gpl3+) (home-page "https://www.gnu.org/software/units/"))) (define-public double-conversion (package (name "double-conversion") (version "3.1.5") (home-page "https://github.com/google/double-conversion") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0csy4pjw1p8rp6g5qxi2h0ychhhp1fldv7gb761627fs2mclw9gv")))) (build-system cmake-build-system) (arguments '(#:test-target "test" #:configure-flags '("-DBUILD_SHARED_LIBS=ON" "-DBUILD_TESTING=ON"))) (synopsis "Conversion routines for IEEE doubles") (description "The double-conversion library provides binary-decimal and decimal-binary routines for IEEE doubles. The library consists of efficient conversion routines that have been extracted from the V8 JavaScript engine.") (license license:bsd-3))) (define-public dionysus (package (name "dionysus") (version "1.4.0") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/dionysus/dionysus-" version ".tar.xz")) (sha256 (base32 "194pzs1mlsj4ww6v37qq3961h5hckm5h805cv0r14xj3g9wfx2sk")))) (build-system gnu-build-system) (inputs (list tcl)) ;for 'tclsh' (synopsis "Local search for universal constants and scientific values") (description "GNU Dionysus is a convenient system for quickly retrieving the values of mathematical constants used in science and engineering. Values can be searched using a simple command-line tool, choosing from three databases: universal constants, atomic numbers, and constants related to semiconductors.") (license license:gpl3+) (home-page "https://www.gnu.org/software/dionysus/"))) (define-public dsfmt (package (name "dsfmt") (version "2.2.3") (source (origin (method url-fetch) (uri (string-append "http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/SFMT/" "dSFMT-src-" version ".tar.gz")) (sha256 (base32 "03kaqbjbi6viz0n33dk5jlf6ayxqlsq4804n7kwkndiga9s4hd42")) (modules '((guix build utils))) ;; Don't distribute html documentation with bundled jquery. (snippet '(begin (delete-file-recursively "html") #t)) ;; Add patches borrowed from Julia. (patches (list (origin (method url-fetch) (uri (string-append "https://raw.githubusercontent.com/JuliaLang/julia/" "v1.3.0/deps/patches/dSFMT.c.patch")) (sha256 (base32 "09mhv11bms8jsmkmdqvlcgljwhzw3b6n9nncpi2b6dla9798hw2y")) (file-name "dSFMT.c.patch")) (origin (method url-fetch) (uri (string-append "https://raw.githubusercontent.com/JuliaLang/julia/" "v1.3.0/deps/patches/dSFMT.h.patch")) (sha256 (base32 "1py5rd0yxic335lzka23f6x2dhncrpizpyrk57gi2f28c0p98y5n")) (file-name "dSFMT.h.patch")))))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) ; no configure script (replace 'build ;; Upstream Makefile does not build a shared library. Borrow from Julia ;; https://github.com/JuliaLang/julia/blob/v1.3.0/deps/dsfmt.mk (lambda _ (invoke "gcc" "-DNDEBUG" "-DDSFMT_MEXP=19937" "-fPIC" "-DDSFMT_DO_NOT_USE_OLD_NAMES" "-O3" "-finline-functions" "-fomit-frame-pointer" "-fno-strict-aliasing" "--param" "max-inline-insns-single=1800" "-Wmissing-prototypes" "-Wall" "-std=c99" "-shared" "dSFMT.c" "-o" "libdSFMT.so"))) (replace 'install ; no "install" target (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (lib (string-append out "/lib")) (inc (string-append out "/include")) (doc (string-append out "/share/doc/" ,name "-" ,version))) (install-file "libdSFMT.so" lib) (install-file "dSFMT.h" inc) (install-file "LICENSE.txt" doc) #t)))))) (synopsis "Double precision SIMD-oriented Fast Mersenne Twister") (description "The dSMFT package speeds up Fast Mersenne Twister generation by avoiding the expensive conversion of integer to double (floating point). dSFMT directly generates double precision floating point pseudorandom numbers which have the IEEE Standard for Binary Floating-Point Arithmetic (ANSI/IEEE Std 754-1985) format. dSFMT is only available on the CPUs which use IEEE 754 format double precision floating point numbers.") (home-page "http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/SFMT/") (license license:bsd-3))) (define-public gsl (package (name "gsl") (version "2.7") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/gsl/gsl-" version ".tar.gz")) (sha256 (base32 "0av04cpblphvvs3kl5rwphniarml503501vrpqw31rd0bmwg7fzg")))) (build-system gnu-build-system) (arguments (let ((system (%current-system))) `(#:configure-flags (list "--disable-static") ;halves package size #:phases (modify-phases %standard-phases ,@(cond ((and (target-riscv64?) (%current-target-system)) '((add-after 'unpack 'force-bootstrap (lambda _ ;; gsl ships with an old configure script that does not ;; support riscv64. Regenerate it. (delete-file "configure"))))) ((or (string-prefix? "aarch64" system) (string-prefix? "powerpc" system)) ;; Some sparse matrix tests are failing on AArch64 and PowerPC: ;; https://lists.gnu.org/archive/html/bug-gsl/2020-04/msg00001.html '((add-before 'check 'disable-failing-tests (lambda _ (substitute* "spmatrix/test.c" ((".*test_complex.*") "\n")))))) ((string-prefix? "i686" system) ;; There are rounding issues with these tests on i686: ;; https://lists.gnu.org/archive/html/bug-gsl/2016-10/msg00000.html ;; https://lists.gnu.org/archive/html/bug-gsl/2020-04/msg00000.html '((add-before 'check 'disable-failing-tests (lambda _ (substitute* "linalg/test.c" ((".*gsl_test\\(test_LU_decomp.*") "\n") ((".*gsl_test\\(test_LUc_decomp.*") "\n") ((".*gsl_test\\(test_QR_decomp_r.*") "\n") ((".*gsl_test\\(test_cholesky_decomp.*") "\n") ((".*gsl_test\\(test_pcholesky_solve.*") "\n") ((".*gsl_test\\(test_COD_lssolve2.*") "\n")) (substitute* "spmatrix/test.c" ((".*test_all.*") "\n") ((".*test_float.*") "\n") ((".*test_complex.*") "\n")) ;; XXX: These tests abort with: ;; gsl: cholesky.c:645: ERROR: matrix is not positive definite (substitute* '("multifit_nlinear/test.c" "multilarge_nlinear/test.c") (("gsl_ieee_env_setup.*" all) (string-append "exit (77);\n" all))))))) (else '())))))) (native-inputs (if (and (target-riscv64?) (%current-target-system)) (list autoconf automake libtool) '())) (home-page "https://www.gnu.org/software/gsl/") (synopsis "Numerical library for C and C++") (description "The GNU Scientific Library is a library for numerical analysis in C and C++. It includes a wide range of mathematical routines, with over 1000 functions in total. Subject areas covered by the library include: differential equations, linear algebra, Fast Fourier Transforms and random numbers.") ;; Linear algebra routines should benefit from SIMD optimizations. (properties `((tunable? . #t))) (license license:gpl3+))) ;; TODO: Merge back into the gsl package as a separate output. (define-public gsl-static (package/inherit gsl (name "gsl-static") (arguments `(,@(package-arguments gsl) #:configure-flags (list "--disable-shared") #:make-flags (list "CFLAGS=-fPIC"))))) (define-public sleef (package (name "sleef") (version "3.5.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/shibatch/sleef") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1jybqrl2dvjxzg30xrhh847s375n2jr1pix644wi6hb5wh5mx3f7")))) (build-system cmake-build-system) (arguments '(#:configure-flags (list "-DCMAKE_BUILD_TYPE=Release" (string-append "-DCMAKE_INSTALL_LIBDIR=" (assoc-ref %outputs "out") "/lib") (string-append "-DCMAKE_INSTALL_PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases ;; SLEEF generates a header library during the build process and writes ;; to it via shell redirection. Make the checkout writable so the ;; build can succeed. (add-after 'unpack 'make-git-checkout-writable (lambda _ (for-each make-file-writable (find-files ".")) #t))))) (inputs (list fftw gmp mpfr openssl)) (home-page "https://sleef.org/") (synopsis "SIMD library for evaluating elementary functions and DFT") (description "SLEEF (SIMD Library for Evaluating Elementary Functions) is a library that implements vectorized versions of all C99 real floating point math functions. It can utilize SIMD instructions that are available on modern processors.") (license (list license:boost1.0 ;sleef license:cc-by4.0)))) ;simplex algorithm (define-public glpk (package (name "glpk") (version "5.0") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/glpk/glpk-" version ".tar.gz")) (sha256 (base32 "05bgxidxj8d9xdp82niy7cy36w181cxq7p8vc3y2ixshpgp1642a")))) (build-system gnu-build-system) (inputs (list gmp)) (arguments `(#:configure-flags '("--with-gmp" "--disable-static"))) (home-page "https://www.gnu.org/software/glpk/") (synopsis "GNU Linear Programming Kit, supporting the MathProg language") (description "GLPK is a C library for solving large-scale linear programming (LP), mixed integer programming (MIP), and other related problems. It supports the GNU MathProg modeling language, a subset of the AMPL language, and features a translator for the language. In addition to the C library, a stand-alone LP/MIP solver is included in the package.") (license license:gpl3+))) (define-public glpk-4 (package (inherit glpk) (name "glpk") (version "4.65") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/glpk/glpk-" version ".tar.gz")) (sha256 (base32 "040sfaa9jclg2nqdh83w71sv9rc1sznpnfiripjdyr48cady50a2")))))) (define-public 4ti2 (package (name "4ti2") (version "1.6.9") (source (origin (method url-fetch) (uri (string-append "https://github.com/4ti2/4ti2/releases/download/" "Release_" (string-map (lambda (c) (if (char=? c #\.) #\_ c)) version) "/4ti2-" version ".tar.gz")) (sha256 (base32 "0rj92x6p9m3la5gasjbj7sa569im527ffmka5y2sv1amgd3fflrh")))) (build-system gnu-build-system) (native-inputs (list (@ (gnu packages base) which))) ; for the tests (inputs (list glpk gmp)) (home-page "http://www.4ti2.de/") (synopsis "Mathematical tool suite for problems on linear spaces") (description "4ti2 implements algorithms for solving algebraic, geometric and combinatorial problems on linear spaces. Among others, it solves systems of linear equations, computes extreme rays of polyhedral cones, solves integer programming problems and computes Markov bases for statistics.") (license license:gpl2+))) (define-public cddlib (package (name "cddlib") (version "0.94m") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/cddlib/cddlib") (commit version))) (sha256 (base32 "09s8323h5w9j6mpl1yc6lm770dkskfxd2ayyafkcjllmnncxzfa0")))) (build-system gnu-build-system) (inputs (list gmp)) (native-inputs (list autoconf automake libtool texlive-amsfonts texlive-dvips-l3backend texlive-latex-graphics texlive-latex-l3backend texlive-tiny)) (arguments (list #:configure-flags #~(list (string-append "--docdir=" #$output "/share/doc/" #$name "-" #$version)))) (home-page "https://www.inf.ethz.ch/personal/fukudak/cdd_home/index.html") (synopsis "Library for convex hulls and extreme rays of polyhedra") (description "The C-library cddlib implements the Double Description Method of Motzkin et al. for generating all vertices (i.e. extreme points) and extreme rays of a general convex polyhedron given by a system of linear inequalities in arbitrary dimension. It can also be used for the converse operation of computing convex hulls.") (license license:gpl2+))) (define-public lrslib (package (name "lrslib") (version "7.2") (source (origin (method url-fetch) (uri (string-append "http://cgm.cs.mcgill.ca/~avis/C/lrslib/archive/" "lrslib-0" (string-delete #\. version) ".tar.gz")) (sha256 (base32 "1w1jsnfgny8cihndr5gfm99pvwp48qsvxkqfsi2q87gd3m57aj7w")))) (build-system gnu-build-system) (inputs (list gmp)) (arguments `(#:tests? #f ; no check phase #:make-flags `("CC=gcc" ,(string-append "prefix=" (assoc-ref %outputs "out")) "all-shared") #:phases (modify-phases %standard-phases (replace 'configure (lambda _ (substitute* "makefile" (("-L \\.") "-L . -Wl,-rpath='$$ORIGIN/../lib'")) #t))))) (home-page "http://cgm.cs.mcgill.ca/~avis/C/lrs.html") (synopsis "Convex hulls of polyhedra with exact arithmetic") (description "The C code of lrslib implements the reverse search algorithm for vertex enumeration and convex hull problems. Its input file format is compatible with cddlib. All computations are done exactly in either multiple precision or fixed integer arithmetic. Output is not stored in memory, so even problems with very large output sizes can sometimes be solved.") (license license:gpl2+))) (define-public libcerf (package (name "libcerf") (version "1.14") (source (origin (method git-fetch) (uri (git-reference (url "https://jugit.fz-juelich.de/mlz/libcerf") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1ic2q7kvxpqmgxlishygvx8d00i4wn51vkq4fyac44ahhf6c3kwd")))) (build-system cmake-build-system) (native-inputs (list perl)) (home-page "https://jugit.fz-juelich.de/mlz/libcerf") (synopsis "Library for complex error functions") (description "@code{libcerf} is a self-contained numeric library that provides an efficient and accurate implementation of complex error functions, along with Dawson, Faddeeva, and Voigt functions.") (license license:expat))) (define-public vinci (package (name "vinci") (version "1.0.5") (source (origin (method url-fetch) (uri (string-append "https://www.math.u-bordeaux.fr/~aenge/software/" "vinci/vinci-" version ".tar.gz")) (sha256 (base32 "1aq0qc1y27iw9grhgnyji3290wwfznsrk3sg6ynqpxwjdda53h4m")))) (build-system gnu-build-system) (inputs (list lrslib)) (arguments `(#:tests? #f ; no check phase #:phases (modify-phases %standard-phases (replace 'configure ;; register the lrs location in the config file (lambda* (#:key inputs #:allow-other-keys) (let* ((lrs (assoc-ref inputs "lrslib")) (lrsexec (string-append lrs "/bin/lrs"))) (substitute* "vinci.h" (("#define LRS_EXEC \"lrs\"") (string-append "#define LRS_EXEC \"" lrsexec "\"")))) #t)) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (install-file "vinci" bin)) #t))))) (home-page "https://www.math.u-bordeaux.fr/~aenge/?category=software&page=vinci") (synopsis "Volume computation for polytopes") (description "Vinci implements a number of volume computation algorithms for convex polytopes in arbitrary dimension. The polytopes can be given by their V-representation (as the convex hull of a finite number of vertices), by their H-representation (as the bounded intersection of a finite number of halfspaces) or by their double description with both representations.") (license license:gpl2+))) (define-public arpack-ng (package (name "arpack-ng") (version "3.8.0") (home-page "https://github.com/opencollab/arpack-ng") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0l7as5z6xvbxly8alam9s4kws70952qq35a6vkljzayi4b9gbklx")))) (build-system gnu-build-system) (native-inputs (list autoconf automake libtool pkg-config)) (inputs (list eigen lapack gfortran)) (synopsis "Fortran subroutines for solving eigenvalue problems") (description "ARPACK-NG is a collection of Fortran77 subroutines designed to solve large scale eigenvalue problems.") (license (license:non-copyleft "file://COPYING" "See COPYING in the distribution.")))) (define-public arpack-ng-3.3.0 (package (inherit arpack-ng) (version "3.3.0") (source (origin (method git-fetch) (uri (git-reference (url (package-home-page arpack-ng)) (commit version))) (file-name (git-file-name (package-name arpack-ng) version)) (sha256 (base32 "00h6bjvxjq7bv0b8pwnc0gw33ns6brlqv00xx2rh3w9b5n205918")))))) (define-public arpack-ng-openmpi (package (inherit arpack-ng) (name "arpack-ng-openmpi") (inputs `(("mpi" ,openmpi) ,@(package-inputs arpack-ng))) (arguments (substitute-keyword-arguments (package-arguments arpack-ng) ((#:configure-flags _ '()) ''("--enable-mpi")) ((#:phases phases '%standard-phases) `(modify-phases ,phases (add-before 'check 'mpi-setup ,%openmpi-setup))))) (synopsis "Fortran subroutines for solving eigenvalue problems with MPI"))) (define-public lapack (package (name "lapack") (version "3.9.0") (source (origin (method url-fetch) (uri (string-append "http://www.netlib.org/lapack/lapack-" version ".tgz")) (sha256 (base32 "1155qixp26c12yrxc76z9mlfw2h3xxymxxv5znpgzh5gaykpndgj")))) (build-system cmake-build-system) (home-page "http://www.netlib.org/lapack/") (inputs `(("fortran" ,gfortran) ("python" ,python-wrapper))) (arguments `(#:configure-flags (list "-DBUILD_SHARED_LIBS:BOOL=YES" "-DLAPACKE=ON" ;; Build the 'LAPACKE_clatms' functions. "-DLAPACKE_WITH_TMG=ON" "-DBUILD_TESTING=ON"))) (synopsis "Library for numerical linear algebra") (description "LAPACK is a Fortran 90 library for solving the most commonly occurring problems in numerical linear algebra.") (license (license:non-copyleft "file://LICENSE" "See LICENSE in the distribution.")))) (define-public clapack (package (name "clapack") (version "3.2.1") (source (origin (method url-fetch) (uri (string-append "http://www.netlib.org/clapack/clapack-" version "-CMAKE.tgz")) (sha256 (base32 "0nnap9q1mv14g57dl3vkvxrdr10k5w7zzyxs6rgxhia8q8mphgqb")))) (build-system cmake-build-system) (arguments `(#:configure-flags '("-DCMAKE_C_FLAGS=-fcommon -O2") #:phases (modify-phases %standard-phases ;; These tests use a lot of stack variables and segfault without ;; lifting resource limits. (add-after 'unpack 'disable-broken-tests (lambda _ (substitute* "TESTING/CMakeLists.txt" (("add_lapack_test.* xeigtstz\\)") "")))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (libdir (string-append out "/lib")) (f2cinc (string-append out "/include/libf2c"))) (mkdir-p f2cinc) (display (getcwd)) (for-each (lambda (file) (install-file file libdir)) '("SRC/liblapack.a" "F2CLIBS/libf2c/libf2c.a" "TESTING/MATGEN/libtmglib.a" "BLAS/SRC/libblas.a")) (for-each (lambda (file) (install-file file f2cinc)) (cons "F2CLIBS/libf2c/arith.h" (find-files (string-append "../clapack-" ,version "-CMAKE/F2CLIBS/libf2c") "\\.h$"))) (copy-recursively (string-append "../clapack-" ,version "-CMAKE/INCLUDE") (string-append out "/include")))))))) (home-page "https://www.netlib.org/clapack/") (synopsis "Numerical linear algebra library for C") (description "The CLAPACK library was built using a Fortran to C conversion utility called f2c. The entire Fortran 77 LAPACK library is run through f2c to obtain C code, and then modified to improve readability. CLAPACK's goal is to provide LAPACK for someone who does not have access to a Fortran compiler.") (license (license:non-copyleft "file://LICENSE" "See LICENSE in the distribution.")))) (define-public scalapack (package (name "scalapack") (version "2.1.0") (source (origin (method url-fetch) (uri (string-append "http://www.netlib.org/scalapack/scalapack-" version ".tgz")) (sha256 (base32 "19i0h9vdc3zsy58r6fy1vs2kz2l7amifkz0cf926j90xz1n23nb1")) (patches (search-patches "scalapack-gcc-10-compilation.patch")))) (build-system cmake-build-system) (inputs `(("mpi" ,openmpi) ("fortran" ,gfortran) ("lapack" ,lapack))) ;for testing only (arguments `(#:configure-flags `("-DBUILD_SHARED_LIBS:BOOL=YES") #:phases (modify-phases %standard-phases (add-before 'check 'mpi-setup ,%openmpi-setup) (add-after 'unpack 'skip-faulty-test (lambda _ ;; FIXME: Skip these two tests that fail to complete for ;; unknown reasons: ;; . (substitute* "TESTING/CMakeLists.txt" (("^add_test\\(x[sd]hseqr.*" all) (string-append "# " all "\n")))))))) (home-page "http://www.netlib.org/scalapack/") (synopsis "Library for scalable numerical linear algebra") (description "ScaLAPACK is a Fortran 90 library of high-performance linear algebra routines on parallel distributed memory machines. ScaLAPACK solves dense and banded linear systems, least squares problems, eigenvalue problems, and singular value problems.") (license (license:non-copyleft "file://LICENSE" "See LICENSE in the distribution.")))) (define-public feedgnuplot (package (name "feedgnuplot") (version "1.60") (home-page "https://github.com/dkogan/feedgnuplot") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0403hwlian2s431m36qdzcczhvfjvh7128m64hmmwbbrgh0n7md7")))) (build-system perl-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'check 'adjust-tests (lambda _ (substitute* "t/plots.t" ;; XXX: The vnlog tests uses 'echo' with escaped strings, ;; but does not enable escape interpretation. (("echo -n ") "echo -ne ")))) (add-after 'install 'install-documentation (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (doc (string-append out "/share/doc/feedgnuplot"))) (mkdir-p doc) (invoke "pod2html" "--title=feedgnuplot" "bin/feedgnuplot" "--outfile" (string-append doc "/feedgnuplot.html"))))) (add-after 'install 'wrap (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (gnuplot (search-input-file inputs "/bin/gnuplot")) ;; XXX: We need List::MoreUtils as well as its supporting ;; (propagated) modules; for now just refer to labels. (modules '("perl-list-moreutils" "perl-exporter-tiny")) (PERL5LIB (string-join (map (lambda (input) (string-append (assoc-ref inputs input) "/lib/perl5/site_perl")) modules) ":"))) (wrap-program (string-append out "/bin/feedgnuplot") `("PERL5LIB" ":" suffix (,PERL5LIB)) `("PATH" ":" suffix (,(dirname gnuplot)))))))))) (inputs (list gnuplot perl-list-moreutils vnlog)) (native-inputs ;; For tests. (list perl-ipc-run perl-string-shellquote)) (synopsis "Pipe-oriented plotting tool") (description "@command{feedgnuplot} is a tool to plot realtime and stored data from the command line, using @command{gnuplot}. It can read data from a pipe or file, make a variety of transformations, and render the result in the terminal or with an external viewer.") (license license:gpl1+))) ;any version (define-public giza (package (name "giza") (version "1.3.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/danieljprice/giza") (commit (string-append "v" version)))) (sha256 (base32 "1clklh3nzgwrwg80h3k5x65gdymbvcc84c44nql7m4bv9b8rqfsq")) (file-name (git-file-name name version)))) (build-system gnu-build-system) (native-inputs (list perl pkg-config)) (inputs (list cairo freetype gfortran)) (home-page "https://danieljprice.github.io/giza/") (synopsis "Scientific plotting library for C/Fortran") (description "Giza is a lightweight scientific plotting library built on top of @code{cairo} that provides uniform output to multiple devices.") (license license:gpl2+))) (define-public gnuplot (package (name "gnuplot") (version "5.4.4") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/gnuplot/gnuplot/" version "/gnuplot-" version ".tar.gz")) (sha256 (base32 "00h97y8njhvfjbdvc0njw0znxbrlfynd1iazn8w3anvzhsvh08rp")))) (build-system gnu-build-system) (native-inputs (list pkg-config texlive-tiny)) (inputs (list cairo gd lua pango readline)) (arguments (list #:configure-flags #~(list (string-append "--with-texdir=" #$output "/texmf-local/tex/latex/gnuplot")) ;; Plot on a dumb terminal during tests. #:make-flags #~'("GNUTERM=dumb"))) (home-page "http://www.gnuplot.info") (synopsis "Command-line driven graphing utility") (description "Gnuplot is a portable command-line driven graphing utility. It was originally created to allow scientists and students to visualize mathematical functions and data interactively, but has grown to support many non-interactive uses such as web scripting. It is also used as a plotting engine by third-party applications like Octave.") ;; X11 Style with the additional restriction that derived works may only be ;; distributed as patches to the original. (license (license:fsf-free "http://gnuplot.cvs.sourceforge.net/gnuplot/gnuplot/Copyright")))) (define-public gctp (package (name "gctp") (version "2.0.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/OkoSanto/GCTP") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "11wqmd443b4nksdbzp1msdws3av948nmwq1xz80w6hka3ss2aigd")))) (native-inputs (list gfortran)) (build-system gnu-build-system) (synopsis "General Cartographic Transformation Package (GCTP)") (description "The General Cartographic Transformation Package (GCTP) is a system of software routines designed to permit the transformation of coordinate pairs from one map projection to another. The GCTP is the standard computer software used by the National Mapping Division for map projection computations.") (home-page "https://github.com/OkoSanto/GCTP") (license license:public-domain))) ;https://www2.usgs.gov/laws/info_policies.html (define-public hdf4 (package (name "hdf4") (version "4.2.14") (source (origin (method url-fetch) (uri (string-append "https://support.hdfgroup.org/ftp/HDF/releases/HDF" version "/src/hdf-" version ".tar.bz2")) (sha256 (base32 "0n29klrrbwan9307np0d9hr128dlpc4nnlf57a140080ll3jmp8l")) (patches (search-patches "hdf4-architectures.patch" "hdf4-reproducibility.patch" "hdf4-shared-fortran.patch" "hdf4-tirpc.patch")))) (build-system gnu-build-system) (native-inputs (list gfortran bison flex)) (inputs `(("zlib" ,zlib) ("libjpeg" ,libjpeg-turbo) ("libtirpc" ,libtirpc))) (arguments `(#:parallel-tests? #f #:configure-flags (list "--enable-shared" "FCFLAGS=-fallow-argument-mismatch" "FFLAGS=-fallow-argument-mismatch" (string-append "CPPFLAGS=-I" (assoc-ref %build-inputs "libtirpc") "/include/tirpc")) #:phases (modify-phases %standard-phases ;; This is inspired by two of Debian's patches. (add-before 'configure 'add-more-aarch64-support (lambda _ (substitute* '("mfhdf/ncgen/ncgen.l" "mfhdf/ncgen/ncgenyy.c" "mfhdf/libsrc/netcdf.h.in") (("AIX5L64") "__aarch64__")) #t)) (add-before 'configure 'patchbuild (lambda _ (substitute* '("mfhdf/hdfimport/testutil.sh.in" "hdf/util/testutil.sh.in") (("/bin/rm") "rm") (("/bin/mkdir") "mkdir")) (substitute* (find-files "." "^Makefile\\.in$") (("@HDF_BUILD_XDR_TRUE@XDR_ADD = \ -R\\$\\(abs_top_builddir\\)/mfhdf/xdr/\\.libs") "") (("@HDF_BUILD_SHARED_TRUE@AM_LDFLAGS = \ -R\\$\\(abs_top_builddir\\)/mfhdf/libsrc/\\.libs \ -R\\$\\(abs_top_builddir\\)/hdf/src/\\.libs \\$\\(XDR_ADD\\)") "")) #t)) (add-after 'configure 'patch-settings (lambda _ ;; libhdf4.settings contains the full path of the ;; compilers used, and its contents are included in ;; .so-files. We truncate the hashes to avoid ;; unnecessary store references to those compilers: (substitute* "libhdf4.settings" (("(/gnu/store/)([0-9A-Za-z]*)" all prefix hash) (string-append prefix (string-take hash 10) "..."))) #t)) (add-after 'install 'provide-absolute-libjpeg-reference (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (libjpeg (assoc-ref inputs "libjpeg"))) ;; libjpeg-turbo does not provide a .la file, so libtool is ;; unable to add an absolute reference for -ljpeg in the .la ;; files. Fix it manually to avoid having to propagate it. (substitute* (find-files (string-append out "/lib") "\\.la$") (("-ljpeg") (string-append "-L" libjpeg "/lib -ljpeg"))) #t)))))) (home-page "https://www.hdfgroup.org/products/hdf4/") (synopsis "Library and multi-object file format for storing and managing data") (description "HDF4 is a library and multi-object file format for storing and managing data between machines. HDF4 is an older hierarchical data format, incompatible with HDF5.") (license (license:non-copyleft "https://www.hdfgroup.org/ftp/HDF/HDF_Current/src/unpacked/COPYING")))) (define-public hdf4-alt (package (inherit hdf4) (name "hdf4-alt") (arguments (substitute-keyword-arguments (package-arguments hdf4) ((#:configure-flags flags) `(cons* "--disable-netcdf" ,flags)))) (synopsis "HDF4 without netCDF API, can be combined with the regular netCDF library"))) (define-public hdf5-1.8 (package (name "hdf5") (version "1.8.22") (source (origin (method url-fetch) (uri (list (string-append "https://support.hdfgroup.org/ftp/HDF5/releases/" "hdf5-" (version-major+minor version) "/hdf5-" version "/src/hdf5-" version ".tar.bz2") (string-append "https://support.hdfgroup.org/ftp/HDF5/" "current" (match (string-split version #\.) ((major minor _ ...) (string-append major minor))) "/src/hdf5-" version ".tar.bz2"))) (sha256 (base32 "194ki2s5jrgl4czkvy5nc9nwjyapah0fj72l0gb0aysplp38i6v8")) (patches (search-patches "hdf5-config-date.patch")))) (build-system gnu-build-system) (inputs (list zlib)) (native-inputs (list gfortran perl)) ;part of the test machinery needs Perl (outputs '("out" ; core library "fortran")) ; fortran interface (arguments `(;; Some of the users, notably Flann, need the C++ interface. #:configure-flags '("--enable-cxx" "--enable-fortran" "--enable-fortran2003" ;; Build a thread-safe library. Unfortunately, ;; 'configure' invites you to either turn off C++, ;; Fortran, and the high-level interface (HL), or ;; to pass '--enable-unsupported'. Debian ;; packagers chose to pass '--enable-unsupported' ;; and we follow their lead here. "--enable-threadsafe" "--with-pthread" "--enable-unsupported") ;; Use -fPIC to allow the R bindings to link with the static libraries #:make-flags (list "CFLAGS=-fPIC" "CXXFLAGS=-fPIC") #:phases (modify-phases %standard-phases (add-before 'configure 'patch-configure (lambda* (#:key outputs #:allow-other-keys) (substitute* "configure" (("/bin/mv") "mv")) (substitute* "fortran/src/Makefile.in" (("libhdf5_fortran_la_LDFLAGS =") (string-append "libhdf5_fortran_la_LDFLAGS = -Wl,-rpath=" (assoc-ref outputs "fortran") "/lib"))) (substitute* "hl/fortran/src/Makefile.in" (("libhdf5hl_fortran_la_LDFLAGS =") (string-append "libhdf5hl_fortran_la_LDFLAGS = -Wl,-rpath=" (assoc-ref outputs "fortran") "/lib"))) #t)) (add-after 'configure 'patch-settings (lambda _ ;; libhdf5.settings contains the full path of the ;; compilers used, and its contents are included in ;; libhdf5.so. We truncate the hashes to avoid ;; unnecessary store references to those compilers: (substitute* "src/libhdf5.settings" (("(/gnu/store/)([a-zA-Z0-9]*)" all prefix hash) (string-append prefix (string-take hash 10) "...")) ;; Don't record the build-time kernel version to make the ;; settings file reproducible. (("Uname information:.*") "Uname information: Linux\n")) #t)) (add-after 'install 'patch-references (lambda* (#:key inputs outputs #:allow-other-keys) (let ((bin (string-append (assoc-ref outputs "out") "/bin")) (zlib (assoc-ref inputs "zlib"))) (substitute* (find-files bin "h5p?cc") (("-lz" lib) (string-append "-L" zlib "/lib " lib))) #t))) (add-after 'install 'split (lambda* (#:key inputs outputs #:allow-other-keys) ;; Move all fortran-related files (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (lib (string-append out "/lib")) (inc (string-append out "/include")) (ex (string-append out "/share/hdf5_examples/fortran")) (fort (assoc-ref outputs "fortran")) (fbin (string-append fort "/bin")) (flib (string-append fort "/lib")) (finc (string-append fort "/include")) (fex (string-append fort "/share/hdf5_examples/fortran"))) (mkdir-p fbin) (mkdir-p flib) (mkdir-p finc) (mkdir-p fex) ;; Note: When built with --enable-parallel, the 'h5fc' file ;; doesn't exist, hence this condition. (when (file-exists? (string-append bin "/h5fc")) (rename-file (string-append bin "/h5fc") (string-append fbin "/h5fc"))) (for-each (lambda (file) (rename-file file (string-append flib "/" (basename file)))) (find-files lib ".*fortran.*")) (for-each (lambda (file) (rename-file file (string-append finc "/" (basename file)))) (find-files inc ".*mod")) (for-each (lambda (file) (rename-file file (string-append fex "/" (basename file)))) (find-files ex ".*")) (delete-file-recursively ex)) #t))))) (home-page "https://www.hdfgroup.org") (synopsis "Management suite for extremely large and complex data") (description "HDF5 is a suite that makes possible the management of extremely large and complex data collections.") (license (license:x11-style "https://www.hdfgroup.org/ftp/HDF5/current/src/unpacked/COPYING")))) (define-public hdf5-1.10 (package (inherit hdf5-1.8) (version "1.10.7") (source (origin (method url-fetch) (uri (list (string-append "https://support.hdfgroup.org/ftp/HDF5/releases/" "hdf5-" (version-major+minor version) "/hdf5-" version "/src/hdf5-" version ".tar.bz2") (string-append "https://support.hdfgroup.org/ftp/HDF5/" "current" (apply string-append (take (string-split version #\.) 2)) "/src/hdf5-" version ".tar.bz2"))) (sha256 (base32 "0pm5xxry55i0h7wmvc7svzdaa90rnk7h78rrjmnlkz2ygsn8y082")) (patches (search-patches "hdf5-config-date.patch")))))) (define-public hdf5-1.12 (package (inherit hdf5-1.8) (version "1.12.1") (source (origin (method url-fetch) (uri (list (string-append "https://support.hdfgroup.org/ftp/HDF5/releases/" "hdf5-" (version-major+minor version) "/hdf5-" version "/src/hdf5-" version ".tar.bz2") (string-append "https://support.hdfgroup.org/ftp/HDF5/" "current" (apply string-append (take (string-split version #\.) 2)) "/src/hdf5-" version ".tar.bz2"))) (sha256 (base32 "074g3z504xf77ff38igs30i1aqxpm508p7yw78ykva7dncrgbyda")) (patches (search-patches "hdf5-config-date.patch")))))) (define-public hdf5 ;; Default version of HDF5. hdf5-1.10) (define-public hdf-java (package (name "hdf-java") (version "3.3.2") (source (origin (method url-fetch) (uri (string-append "https://www.hdfgroup.org/ftp/HDF5/releases/HDF-JAVA/hdfjni-" version "/src/CMake-hdfjava-" version ".tar.gz")) (sha256 (base32 "0m1gp2aspcblqzmpqbdpfp6giskws85ds6p5gz8sx7asyp7wznpr")) (modules '((guix build utils))) (snippet ; Make sure we don't use the bundled sources and binaries. `(begin (for-each delete-file (list "SZip.tar.gz" "ZLib.tar.gz" "JPEG8d.tar.gz" "HDF4.tar.gz" "HDF5.tar.gz")) (delete-file-recursively ,(string-append "hdfjava-" version "/lib")) #t)))) (build-system gnu-build-system) (native-inputs `(("jdk" ,icedtea "jdk") ("automake" ,automake) ; For up to date 'config.guess' and 'config.sub'. ;; For tests: ("hamcrest-core" ,java-hamcrest-core) ("junit" ,java-junit) ("slf4j-simple" ,java-slf4j-simple))) (inputs `(("hdf4" ,hdf4) ("hdf5" ,hdf5-1.8) ("zlib" ,zlib) ("libjpeg" ,libjpeg-turbo) ("slf4j-api" ,java-slf4j-api))) (arguments `(#:configure-flags (list (string-append "--target=" ,(or (%current-target-system) (%current-system))) (string-append "--with-jdk=" (assoc-ref %build-inputs "jdk") "/include," (assoc-ref %build-inputs "jdk") "/lib" ) (string-append "--with-hdf4=" (assoc-ref %build-inputs "hdf4") "/lib") (string-append "--with-hdf5=" (assoc-ref %build-inputs "hdf5") "/lib")) #:make-flags (list (string-append "HDFLIB=" (assoc-ref %build-inputs "hdf4") "/lib") (string-append "HDF5LIB=" (assoc-ref %build-inputs "hdf5") "/lib") (string-append "ZLIB=" (search-input-file %build-inputs "/lib/libz.so")) (string-append "JPEGLIB=" (search-input-file %build-inputs "/lib/libjpeg.so")) "LLEXT=so") #:phases (modify-phases %standard-phases (add-before 'configure 'chdir-to-source (lambda _ (chdir ,(string-append "hdfjava-" version)) #t)) (add-before 'configure 'patch-build (lambda* (#:key inputs outputs #:allow-other-keys) (substitute* "configure" (("COPT=\"") "COPT=\"-O2 ") ; CFLAGS is ignored in Makefiles (("/bin/cat") (which "cat"))) ;; Set classpath for compilation (substitute* '("hdf/hdf5lib/Makefile.in" "hdf/hdf5lib/exceptions/Makefile.in" "hdf/hdflib/Makefile.in") (("\\$\\(TOP\\)/lib/slf4j-api-1\\.7\\.5\\.jar") ;; 'slf4j-api-X.Y.Z.jar' is installed in a Maven-style ;; directory, so use 'find-files' to find it. (car (find-files (assoc-ref inputs "slf4j-api") "^slf4j-api.*\\.jar$")))) ;; Replace outdated config.sub and config.guess: (with-directory-excursion "config" (for-each (lambda (file) (install-file (search-input-file inputs (string-append "/share/automake-" ,(version-major+minor (package-version automake)) "/" file)) ".")) '("config.sub" "config.guess"))) ;; Fix embedded version number (let ((hdf5version (list ,@(string-split (package-version hdf5) #\.)))) (substitute* "hdf/hdf5lib/H5.java" (("1, 8, 19") (string-join hdf5version ", ")))) (mkdir-p (string-append (assoc-ref outputs "out"))) ;; Set classpath for tests (let* ((build-dir (getcwd)) (lib (string-append build-dir "/lib")) (jhdf (string-append lib "/jhdf.jar")) (jhdf5 (string-append lib "/jhdf5.jar")) (testjars (append (map (lambda (i) (car (find-files (assoc-ref inputs i) (string-append "^" i ".*\\.jar$")))) '("slf4j-api" "slf4j-simple")) (list (car (find-files (assoc-ref inputs "junit") "jar$")) (car (find-files (assoc-ref inputs "hamcrest-core") "jar$"))))) (class-path (string-join `("." ,build-dir ,jhdf ,jhdf5 ,@testjars) ":"))) (substitute* '("test/hdf5lib/Makefile.in" "test/hdf5lib/junit.sh.in" "examples/runExample.sh.in") (("/usr/bin/test") (search-input-file inputs "/bin/test")) (("/usr/bin/uname") (search-input-file inputs "/bin/uname")) (("CLASSPATH=[^\n]*") (string-append "CLASSPATH=" class-path))) (setenv "CLASSPATH" class-path)) #t)) (add-before 'check 'build-examples (lambda _ (apply invoke `("javac" ,@(find-files "examples" ".*\\.java")))))) #:parallel-build? #f #:parallel-tests? #f )) (home-page "https://support.hdfgroup.org/products/java") (synopsis "Java interface for the HDF4 and HDF5 libraries") (description "Java HDF Interface (JHI) and Java HDF5 Interface (JHI5) use the Java Native Interface to wrap the HDF4 and HDF5 libraries, which are implemented in C.") ;; BSD-style license: (license (license:x11-style "https://support.hdfgroup.org/ftp/HDF5/hdf-java\ /current/src/unpacked/COPYING")))) (define-public hdf-eos2 (package (name "hdf-eos2") (version "19.1.0") (source (origin (method url-fetch) (uri "ftp://edhs1.gsfc.nasa.gov\ /edhs/hdfeos/latest_release/HDF-EOS2.19v1.00.tar.Z") (sha256 (base32 "0c9fcz25s292ldap12wxmlrvnyz99z24p63d8fwx51bf8s0s1zrz")) (patches (search-patches "hdf-eos2-remove-gctp.patch" "hdf-eos2-build-shared.patch" "hdf-eos2-fortrantests.patch")))) (build-system gnu-build-system) (native-inputs (list gfortran)) (inputs `(("hdf4" ,hdf4-alt) ; assume most HDF-EOS2 users won't use the HDF4 netCDF API ;; XXX: These inputs are really dependencies of hdf4. ("zlib" ,zlib) ("libjpeg" ,libjpeg-turbo) ("libtirpc" ,libtirpc) ("gctp" ,gctp))) (arguments `( #:configure-flags '("--enable-install-include" "--enable-shared" "CC=h4cc -Df2cFortran" "LIBS=-lgctp") #:parallel-tests? #f)) (home-page "https://hdfeos.org/software/library.php#HDF-EOS2") (synopsis "HDF4-based data format for NASA's Earth Observing System") (description "HDF-EOS2 is a software library built on HDF4 which supports the construction of data structures used in NASA's Earth Observing System (Grid, Point and Swath).") ;; Source files carry a permissive license header. (license (license:non-copyleft home-page)))) (define-public hdf-eos5 (package (name "hdf-eos5") (version "1.15") (source (origin (method url-fetch) (uri (string-append "ftp://edhs1.gsfc.nasa.gov\ /edhs/hdfeos5/latest_release/HDF-EOS5." version ".tar.Z")) (sha256 (base32 "1p83333nzzy8rn5chxlm0hrkjjnhh2w1ji8ac0f9q4xzg838i58i")) (patches (search-patches "hdf-eos5-build-shared.patch" "hdf-eos5-remove-gctp.patch" "hdf-eos5-fix-szip.patch" "hdf-eos5-fortrantests.patch")))) (native-inputs (list gfortran)) (build-system gnu-build-system) (inputs (list hdf5-1.8 zlib gctp)) (arguments `(#:configure-flags '("--enable-install-include" "--enable-shared" "CC=h5cc -Df2cFortran" "LIBS=-lgctp") #:parallel-tests? #f)) (synopsis "HDF5-based data format for NASA's Earth Observing System") (description "HDF-EOS5 is a software library built on HDF5 to support the construction of data structures used in NASA's Earth Observing System (Grid, Point and Swath).") (home-page "http://www.hdfeos.org/software/library.php#HDF-EOS5") ;; Source files carry a permissive license header. (license (license:non-copyleft home-page)))) (define-public hdf5-parallel-openmpi (package/inherit hdf5-1.10 ;use the latest (name "hdf5-parallel-openmpi") (inputs `(("mpi" ,openmpi) ,@(package-inputs hdf5))) (arguments (substitute-keyword-arguments (package-arguments hdf5) ((#:configure-flags flags) ``("--enable-parallel" ,@(delete "--enable-cxx" (delete "--enable-threadsafe" ,flags)))) ((#:phases phases) `(modify-phases ,phases (add-after 'build 'mpi-setup ,%openmpi-setup) (add-before 'check 'patch-tests (lambda _ ;; OpenMPI's mpirun will exit with non-zero status if it ;; detects an "abnormal termination", i.e. any process not ;; calling MPI_Finalize(). Since the test is explicitly ;; avoiding MPI_Finalize so as not to have at_exit and thus ;; H5C_flush_cache from being called, mpirun will always ;; complain, so turn this test off. (substitute* "testpar/Makefile" (("(^TEST_PROG_PARA.*)t_pflush1(.*)" front back) (string-append front back "\n"))) (substitute* "tools/test/h5diff/testph5diff.sh" (("/bin/sh") (which "sh"))) #t)))))) (synopsis "Management suite for data with parallel IO support"))) (define-public hdf5-blosc (package (name "hdf5-blosc") (version "1.0.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/Blosc/hdf5-blosc") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1nj2bm1v6ymm3fmyvhbn6ih5fgdiapavlfghh1pvbmhw71cysyqs")))) (build-system cmake-build-system) (arguments `(#:configure-flags (list (string-append "-DBLOSC_INSTALL_DIR=" (assoc-ref %build-inputs "c-blosc")) (string-append "-DPLUGIN_INSTALL_PATH=" (assoc-ref %outputs "out") "/hdf5/lib/plugin")) #:phases (modify-phases %standard-phases (add-after 'unpack 'do-not-build-blosc (lambda _ (substitute* "CMakeLists.txt" (("set\\(BLOSC_INSTALL_DIR.*") "") (("ExternalProject_Add\\(project_blosc") "message(")) #t))))) (inputs (list c-blosc hdf5-1.10)) (home-page "https://github.com/Blosc/hdf5-blosc") (synopsis "Filter for HDF5 using the Blosc compressor") (description "This is a filter for HDF5 that uses the Blosc compressor; by installing this filter, you can read and write HDF5 files with Blosc-compressed datasets.") (license license:expat))) (define-public h5check (package (name "h5check") (version "2.0.1") (source (origin (method url-fetch) (uri (string-append "https://www.hdfgroup.org/ftp/HDF5/tools/" "h5check/src/h5check-" version ".tar.gz")) (sha256 (base32 "1gm76jbwhz9adbxgn14zx8cj33dmjdr2g5xcy0m9c2gakp8w59kj")))) (build-system gnu-build-system) (inputs (list hdf5-1.8)) ;h5cc for tests (home-page "https://www.hdfgroup.org/products/hdf5_tools/h5check.html") (synopsis "HDF5 format checker") (description "@code{h5check} is a validation tool for verifying that an HDF5 file is encoded according to the HDF File Format Specification.") (license (license:x11-style "file://COPYING")))) (define-public itex2mml (package (name "itex2mml") (version "1.6.1") (source (origin (method url-fetch) (uri (string-append "https://golem.ph.utexas.edu" "/~distler/blog/files/itexToMML-" version ".tar.gz")) (sha256 (base32 "0pz51c0hfh2mg8xli0wj7hf92s3b7yf5r4114g8z8722lcm5gwiy")) (snippet #~(begin (use-modules (guix build utils)) (delete-file-recursively "itex-binaries"))))) (build-system gnu-build-system) (native-inputs (list bison flex)) (arguments (list #:make-flags #~(list (string-append "BINDIR=" #$output "/bin/") (string-append "CC=" #$(cc-for-target))) #:tests? #f ;; there are none #:phases #~(modify-phases %standard-phases (delete 'configure) (add-before 'build 'chdir (lambda args (chdir "itex-src"))) (add-before 'install 'make-bindir (lambda args (mkdir-p (string-append #$output "/bin")))) (add-after 'install 'install-doc (lambda* (#:key outputs #:allow-other-keys) (let* ((doc-prefix (or (assoc-ref outputs "doc") #$output)) (itex2mml+version (strip-store-file-name #$output)) (doc-dir (string-append doc-prefix "/share/doc/" itex2mml+version))) (install-file "../README" doc-dir))))))) (home-page "https://golem.ph.utexas.edu/~distler/blog/itex2MML.html") (synopsis "LaTeX to XHTML/MathML converter") (description "The @command{itex2MML} utility is a stream filter. It takes text with embedded itex equations, converts the itex equations to MathML, and outputs the resulting text.") (license (list license:lgpl2.0+ license:gpl2+ license:mpl1.1)))) (define-public itpp (package (name "itpp") (version "4.3.1") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/itpp/itpp/" version "/itpp-" version ".tar.gz")) (sha256 (base32 "14ddy2xnb6sgp4hiax9v5sv4pr4l4dd4ps76nfha3nrpr1ikhcqm")))) (build-system cmake-build-system) (arguments `(#:tests? #f ; Tests require googletest *sources* #:phases (modify-phases %standard-phases (add-after 'unpack 'set-man-page-date (lambda _ (substitute* "itpp-config.1.cmake.in" ((".PACKAGE_DATE.") "2012-04-18")))) (add-before 'build 'set-force-source-date ;; for reproducible dates, texlive needs this to respect respect ;; SOURCE_DATE_EPOCH (lambda _ (setenv "FORCE_SOURCE_DATE" "1")))))) (inputs (list lapack fftw)) ;; FIXME: Even though the fonts are available dvips complains: ;; "Font cmmi10 not found; characters will be left blank." (native-inputs `(("texlive" ,texlive-tiny) ("ghostscript" ,ghostscript) ("doxygen" ,doxygen))) (home-page "http://itpp.sourceforge.net") (synopsis "C++ library of maths, signal processing and communication classes") (description "IT++ is a C++ library of mathematical, signal processing and communication classes and functions. Its main use is in simulation of communication systems and for performing research in the area of communications. The kernel of the library consists of generic vector and matrix classes, and a set of accompanying routines. Such a kernel makes IT++ similar to MATLAB, GNU Octave or SciPy.") (license license:gpl3+))) (define-public netcdf (package (name "netcdf") (version "4.7.4") (source (origin (method url-fetch) (uri (string-append "https://www.unidata.ucar.edu/downloads/netcdf/ftp/" "netcdf-c-" version ".tar.gz")) (sha256 (base32 "1a2fpp15a2rl1m50gcvvzd9y6bavl6vjf9zzf63sz5gdmq06yiqf")) (modules '((guix build utils))) (snippet ;; Make sure this variable is defined only once. Failing to do so ;; would break builds of 'netcdf-parallel-openmpi' with a ;; multiple-definition link error with GCC 10. '(substitute* "ncdump/ocprint.c" (("^int ocdebug") "static int ocdebug"))) (patches (search-patches "netcdf-date-time.patch")))) (build-system gnu-build-system) (native-inputs (list m4 doxygen graphviz)) (inputs `(("hdf4" ,hdf4-alt) ("hdf5" ,hdf5) ("curl" ,curl) ("zlib" ,zlib) ("libjpeg" ,libjpeg-turbo))) (arguments `(#:configure-flags '("--enable-doxygen" "--enable-dot" "--enable-hdf4") #:phases (modify-phases %standard-phases (add-before 'configure 'fix-source-date (lambda _ ;; As we ${SOURCE_DATE_EPOCH} evaluates to "1" in the build ;; environment, `date -u -d ${SOURCE_DATE_EPOCH}` will evaluate ;; to '1st hour of the current day', and therefore makes the ;; package not reproducible. (substitute* "./configure" (("date -u -d \"\\$\\{SOURCE_DATE_EPOCH\\}\"") "date --date='@0'")) #t)) (add-after 'configure 'patch-settings (lambda _ ;; libnetcdf.settings contains the full filename of the compilers ;; used to build the library. We truncate the hashes of those ;; filenames to avoid unnecessary references to the corresponding ;; store items. (substitute* "libnetcdf.settings" (("(/gnu/store/)([0-9A-Za-z]*)" all prefix hash) (string-append prefix (string-take hash 10) "..."))) #t))) #:parallel-tests? #f)) ;various race conditions (home-page "https://www.unidata.ucar.edu/software/netcdf/") (synopsis "Library for scientific data") (description "NetCDF is an interface for scientific data access and a software library that provides an implementation of the interface. The netCDF library defines a machine-independent format for representing scientific data. Together, the interface, library, and format support the creation, access, and sharing of scientific data.") (license (license:x11-style "file://COPYRIGHT")))) (define-public netcdf-parallel-openmpi (package (inherit netcdf) (name "netcdf-parallel-openmpi") (inputs `(("mpi" ,openmpi) ,@(alist-replace "hdf5" (list hdf5-parallel-openmpi) (package-inputs netcdf)))) ;; TODO: Replace pkg-config references in nc-config with absolute references (arguments (substitute-keyword-arguments (package-arguments netcdf) ((#:configure-flags flags) `(cons* "CC=mpicc" "CXX=mpicxx" "--enable-parallel-tests" ;; Shared libraries not supported with parallel IO. "--disable-shared" "--with-pic" ,flags)) ((#:phases phases '%standard-phases) `(modify-phases ,phases (add-after 'build 'mpi-setup ,%openmpi-setup))))))) (define-public netcdf-fortran (package (name "netcdf-fortran") (version "4.5.3") (source (origin (method url-fetch) (uri (string-append "ftp://ftp.unidata.ucar.edu/pub/netcdf/netcdf-fortran-" version ".tar.gz")) (sha256 (base32 "0x4acvfhbsx1q79dkkwrwbgfhm0w5ngnp4zj5kk92s1khihmqfhj")))) (build-system gnu-build-system) (arguments `(#:configure-flags '("FCFLAGS=-fallow-argument-mismatch" "FFLAGS=-fallow-argument-mismatch") #:parallel-tests? #f)) (inputs (list netcdf)) (native-inputs (list gfortran)) (synopsis "Fortran interface for the netCDF library") (description (package-description netcdf)) (home-page (package-home-page netcdf)) (license (package-license netcdf)))) (define-public n2p2 (package (name "n2p2") (version "2.1.4") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/CompPhysVienna/n2p2") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1lw195ihpxwh08387i4gamk1glhalpq888q6nj8l5vswbgnrv1pq")))) (build-system gnu-build-system) (arguments `(#:make-flags '("MODE=shared" "-C" "src") #:phases (modify-phases %standard-phases (add-after 'unpack 'post-unpack (lambda* (#:key inputs #:allow-other-keys) (substitute* "src/makefile.gnu" (("PROJECT_EIGEN=/usr/include/eigen3") (string-append "PROJECT_EIGEN=" (assoc-ref inputs "eigen") "/include/eigen3"))) (substitute* "src/makefile.gnu" (("-lblas") (string-append "-L" (assoc-ref inputs "openblas") "/lib -lopenblas")) (("-march=native") "")) (substitute* "src/application/makefile" (("LDFLAGS=") "LDFLAGS=-Wl,-rpath='$$ORIGIN/../lib' ")))) (delete 'configure) (delete 'check) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bindir (string-append out "/bin")) (libdir (string-append out "/lib")) (incdir (string-append out "/include"))) (for-each (lambda (f) (install-file f bindir)) (find-files "bin" "^nnp-")) (for-each (lambda (f) (install-file f libdir)) (find-files "lib" "\\.so$")) (for-each (lambda (f) (install-file f incdir)) (find-files "include" "\\.h$")))))))) (inputs (list openmpi gsl openblas eigen)) (synopsis "Neural network potentials for chemistry and physics") (description "This package contains software that will allow you to use existing neural network potential parameterizations to predict energies and forces (with standalone tools but also in conjunction with the MD software LAMMPS). In addition it is possible to train new neural network potentials with the provided training tools.") (home-page "https://compphysvienna.github.io/n2p2/") (properties '((tunable? . #t))) ;to benefit from SIMD code in Eigen (license license:gpl3+))) (define-public nlopt (package (name "nlopt") (version "2.7.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/stevengj/nlopt/") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1xpdza28i8w441fwv6a5f3qk4zi7ys6ws9fx6kr5ny27dfdz6rr1")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'configure 'set-libnlopt-file-name (lambda* (#:key outputs #:allow-other-keys) ;; Make sure the Scheme module refers to the library by its ;; absolute file name. (let ((out (assoc-ref outputs "out"))) (substitute* "src/swig/nlopt-guile.i" (("\"nlopt_guile\"") (format #f "~s" `(format #f "~anlopt_guile" (if (getenv "NLOPT_UNINSTALLED") "" ,(format #f "~a/lib/guile/3.0/extensions/" out)))))) (setenv "NLOPT_UNINSTALLED" "1"))))))) (inputs (list guile-3.0 octave python)) (native-inputs (list pkg-config swig)) (home-page "http://ab-initio.mit.edu/wiki/") (synopsis "Library for nonlinear optimization") (description "NLopt is a library for nonlinear optimization, providing a common interface for a number of different free optimization routines available online as well as original implementations of various other algorithms.") (license license:lgpl2.1+))) (define-public ipopt (package (name "ipopt") (version "3.13.4") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/coin-or/Ipopt") (commit (string-append "releases/" version)))) (file-name (git-file-name name version)) (sha256 (base32 "08gznhwhqv1x4baksz350ih8q16r5rd0k8vals6078m3h94khr4b")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (add-after 'install 'add--L-flags-in-ipopt.pc (lambda* (#:key inputs outputs #:allow-other-keys) ;; The '.pc' file lists '-llapack -lblas' in "Libs"; ;; move it to "Libs.private" where it belongs, and add a ;; '-L' flag for LAPACK. (let ((out (assoc-ref outputs "out")) (lapack (assoc-ref inputs "lapack"))) (substitute* (string-append out "/lib/pkgconfig/" "ipopt.pc") (("Libs: (.*)-llapack -lblas(.*)$" _ before after) (string-append "Libs: " before " " after "\n" "Libs.private: " before "-L" lapack "/lib -llapack -lblas " after "\n"))) #t)))))) (native-inputs (list gfortran pkg-config)) (inputs ;; TODO: Maybe add dependency on COIN-MUMPS, ASL, and HSL. (list lapack)) ;for both libblas and liblapack (home-page "https://www.coin-or.org") (synopsis "Large-scale nonlinear optimizer") (description "The Interior Point Optimizer (IPOPT) is a software package for large-scale nonlinear optimization. It provides C++, C, and Fortran interfaces.") (license license:epl2.0))) (define-public nomad-optimizer (package (name "nomad-optimizer") (version "4.2.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/bbopt/nomad/") (commit (string-append "v." version)))) (file-name (git-file-name name version)) (sha256 (base32 "1r4ygy3xn83dnppsw1451ynklsxpb238g5gk57inn84ghmdk08mj")))) (build-system cmake-build-system) (native-inputs (list python-wrapper python-cython)) (arguments `(#:imported-modules ((guix build python-build-system) ,@%cmake-build-system-modules) #:modules (((guix build python-build-system) #:select (python-version site-packages)) (guix build cmake-build-system) (guix build utils)) #:configure-flags '("-DBUILD_INTERFACE_C=ON" "-DBUILD_INTERFACE_PYTHON=ON" "-DBUILD_TESTS=ON") #:phases (modify-phases %standard-phases (add-after 'unpack 'fix-sources-for-build (lambda* (#:key outputs #:allow-other-keys) (substitute* "CMakeLists.txt" ;; CMAKE_INSTALL_PREFIX is accidentally hardcoded. (("set\\(CMAKE_INSTALL_PREFIX .* FORCE\\)") "") ;; Requiring GCC version 8 or later is unwarranted. (("message\\(FATAL_ERROR \"GCC version < 8") "message(STATUS \"GCC version < 8")) (let ((out (assoc-ref outputs "out"))) (substitute* "interfaces/PyNomad/CMakeLists.txt" ;; We don't want to build in-place, and anyway the install ;; command further below runs build_ext as a prerequisite. (("COMMAND python setup_PyNomad\\.py .* build_ext --inplace\n") "") ;; Don't install locally. (("COMMAND python (setup_PyNomad\\.py .* install) --user\n" _ args) (string-append "COMMAND ${CMAKE_COMMAND} -E env" " CC=" ,(cc-for-target) " CXX=" ,(cxx-for-target) " " (which "python") " " args " --prefix=" out "\n"))) ;; Fix erroneous assumptions about the paths of the include and ;; library directories. (substitute* "interfaces/PyNomad/setup_PyNomad.py" (("^( +os_include_dirs = ).*" _ prefix) (string-append prefix "[\"../../src\"]\n")) (("^(installed_lib_dir1 = ).*" _ prefix) (string-append prefix "\"" out "/lib\"\n")) (("^installed_lib_dir2 = .*") "") (("^ +link_args\\.append\\(\"-Wl,-rpath,\" \\+ installed_lib_dir2\\)\n") ""))))) ;; Fix the tests so they run in out-of-source builds. ;; ;; TODO: Add support for examples/basic/batch/single_obj_MPIparallel, ;; by adding openmpi to native-inputs and adjusting the example's ;; BB_EXE parameter. (add-after 'fix-sources-for-build 'fix-sources-for-tests (lambda _ (substitute* "examples/CMakeLists.txt" ;; This test passes only sometimes. ;; See https://github.com/bbopt/nomad/issues/72. (("^ +add_subdirectory\\(\\$\\{CMAKE_CURRENT_SOURCE_DIR\\}/advanced/library/PSDMads\\)\n") "") ;; examples/basic/batch/example3 is accidentally omitted. (("^(add_subdirectory\\(\\$\\{CMAKE_CURRENT_SOURCE_DIR\\}/basic/batch/example)2(\\)\n)" _ prefix suffix) (string-append prefix "2" suffix prefix "3" suffix)) ;; The generated runExampleTest.sh script runs the test as part ;; of a pipeline and incorrectly (because pipefail is unset) ;; relies on the value of the exit status immediately after the ;; pipeline. ;; (The patch-shebangs phase runs later than this one, so no ;; need to update the path to bash here.) (("#!/bin/bash") "#!/bin/bash\nset -o pipefail")) (substitute* (map (lambda (d) (string-append "examples/" d "/CMakeLists.txt")) (append (map (lambda (d) (string-append "basic/library/" d)) '("example1" "example2" "example3" "single_obj_parallel")) (map (lambda (d) (string-append "advanced/library/" d)) '("FixedVariable" "NMonly" "PSDMads" "Restart" "c_api/example1" "c_api/example2" "exampleSuggestAndObserve")))) ;; The runExampleTest.sh script is run with WORKING_DIRECTORY ;; set to CMAKE_CURRENT_SOURCE_DIR. ;; Other scripts invoked by that script (for example ;; examples/advanced/batch/SuggestAndObserve/loopSuggestAndObserve.sh) ;; are in that same directory, but compiled examples are ;; located in CMAKE_CURRENT_BINARY_DIR. (("(COMMAND \\$\\{CMAKE_BINARY_DIR\\}/examples/runExampleTest\\.sh )\\.(/.*)" _ command test) (string-append command "${CMAKE_CURRENT_BINARY_DIR}" test))) ;; The examples/basic/batch/example3 executable is already named ;; bb3.exe. (substitute* "examples/basic/batch/single_obj_parallel/CMakeLists.txt" (("bb3.exe") "bb_parallel.exe")) ;; (Unrelated to support for out-of-source testing.) (make-file-writable "examples/advanced/library/exampleSuggestAndObserve/cache0.txt") (let ((builddir (string-append (getcwd) "/../build"))) (let ((dir "examples/advanced/library/FixedVariable")) (substitute* (string-append dir "/fixedVariable.cpp") (("^( +std::string sExe = ).*" _ prefix) (string-append prefix "\"" builddir "/" dir "/ufl.exe" "\";\n")))) ;; The BB_EXE and SURROGATE_EXE paths are interpreted relative ;; to the configuration file provided to NOMAD. ;; However, the configuration files are all in the source tree ;; rather than in the build tree (unlike the compiled ;; executables). (let ((fix-exe-path (lambda* (dir #:optional (file "param.txt") (exe-opt "BB_EXE")) (substitute* (string-append dir "/" file) (((string-append "^" exe-opt " +")) ;; The $ prevents NOMAD from prefixing ;; the executable with the path of the ;; parent directory of the configuration ;; file NOMAD was provided with as ;; argument (param.txt or some such). (string-append exe-opt " $" builddir "/" dir "/")))))) (for-each (lambda (dir) (let ((dir (string-append "examples/" dir))) (substitute* (string-append dir "/CMakeLists.txt") ;; The install phase has not yet run. (("COMMAND \\$\\{CMAKE_INSTALL_PREFIX\\}/bin/nomad ") "COMMAND ${CMAKE_BINARY_DIR}/src/nomad ")) (fix-exe-path dir) (when (equal? dir "examples/basic/batch/surrogate_sort") (fix-exe-path dir "param.txt" "SURROGATE_EXE")))) (append (map (lambda (d) (string-append "basic/batch/" d)) '("example1" "example2" "example3" "single_obj" "single_obj_parallel" ;; "single_obj_MPIparallel" "surrogate_sort")) '("advanced/batch/LHonly"))) (let ((dir "examples/advanced/batch/FixedVariable")) (substitute* (string-append dir "/runFixed.sh") ;; Hardcoded path to NOMAD executable. (("^\\.\\./\\.\\./\\.\\./\\.\\./bin/nomad ") (string-append builddir "/src/nomad "))) (for-each (lambda (f) (fix-exe-path dir f)) '("param1.txt" "param2.txt" "param3.txt" "param10.txt"))))))) ;; The information in the .egg-info file is not kept up to date. (add-after 'install 'delete-superfluous-egg-info (lambda* (#:key inputs outputs #:allow-other-keys) (delete-file (string-append (site-packages inputs outputs) "/PyNomad-0.0.0-py" (python-version (assoc-ref inputs "python")) ".egg-info"))))))) (home-page "https://www.gerad.ca/nomad/") (synopsis "Nonlinear optimization by mesh-adaptive direct search") (description "NOMAD is a C++ implementation of the mesh-adaptive direct search (MADS) algorithm, designed for difficult blackbox optimization problems. These problems occur when the functions defining the objective and constraints are the result of costly computer simulations.") (license license:lgpl3+))) (define-public cbc (package (name "cbc") (version "2.10.5") (source (origin (method url-fetch) (uri (string-append "https://www.coin-or.org/download/source/" "Cbc/Cbc-" version ".tgz")) (sha256 (base32 "0wk9vr6zc62gw71v7gnra5wxqlcljcgbhm5lasx236v791b986ns")) (modules '((guix build utils))) (snippet ;; Make sure we don't use the bundled software. '(delete-file-recursively "ThirdParty")))) (build-system gnu-build-system) (native-inputs (list gfortran pkg-config)) (inputs (list openblas)) (home-page "https://www.coin-or.org") (synopsis "Branch-and-cut solver") (description "Cbc (Coin-or branch and cut) is a mixed integer linear programming solver written in C++. It can be used as a library or as a standalone executable.") (license license:epl1.0))) (define-public clp (package (name "clp") (version "1.17.6") (source (origin (method url-fetch) (uri (string-append "https://www.coin-or.org/download/source/" "Clp/Clp-" version ".tgz")) (sha256 (base32 "0ap1f0lxppa6pnbc4bg7ih7a96avwaki482nig8w5fr3vg9wvkzr")) (modules '((guix build utils))) (snippet ;; Make sure we don't use the bundled software. '(begin (delete-file-recursively "ThirdParty") #t)))) (build-system gnu-build-system) (native-inputs (list gfortran pkg-config)) (inputs (list openblas)) (home-page "https://www.coin-or.org") (synopsis "Linear programming solver") (description "CLP is a high quality linear programming solver. Its main strengths are its dual and primal Simplex algorithms. It also has a barrier algorithm for linear and quadratic objectives. There are limited facilities for nonlinear and quadratic objectives using the Simplex algorithm.") (license license:epl1.0))) (define-public gecode (package (name "gecode") (version "6.2.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/Gecode/gecode") (commit (string-append "release-" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0b1cq0c810j1xr2x9y9996p894571sdxng5h74py17c6nr8c6dmk")) (modules '((guix build utils))) (snippet '(begin ;; delete generated sources (for-each delete-file '("gecode/kernel/var-imp.hpp" "gecode/kernel/var-type.hpp")))))) (outputs '("out" "examples")) (build-system gnu-build-system) (arguments `(#:configure-flags (list (string-append "GLDFLAGS=-Wl,-rpath=" (assoc-ref %outputs "out") "/lib") "--enable-examples=no") #:modules ((guix build gnu-build-system) (guix build utils) (ice-9 rdelim) (ice-9 popen)) #:phases (modify-phases %standard-phases (add-after 'build 'build-examples (lambda* (#:key outputs #:allow-other-keys) (invoke "make" "compileexamples"))) ;; The Makefile disrespects GLDFLAGS for some reason, so we have to ;; patch it ourselves... *sigh* (add-after 'install 'fix-rpath (lambda* (#:key outputs #:allow-other-keys) (let ((libdir (string-append (assoc-ref outputs "out") "/lib"))) (for-each (lambda (file) (let* ((pipe (open-pipe* OPEN_READ "patchelf" "--print-rpath" file)) (line (read-line pipe))) (and (zero? (close-pipe pipe)) (invoke "patchelf" "--set-rpath" (string-append libdir ":" line) file)))) (find-files libdir ".*\\.so$"))))) (add-after 'install 'install-examples (lambda* (#:key outputs #:allow-other-keys) (invoke "make" "installexamples" (string-append "bindir=" (assoc-ref outputs "examples") "/bin")))) ;; Tests depend on installed libraries. (delete 'check) (add-after 'fix-rpath 'check (assoc-ref %standard-phases 'check))))) (native-inputs (list patchelf perl sed)) (home-page "https://www.gecode.org") (synopsis "Toolkit for developing constraint-based systems") (description "Gecode is a C++ toolkit for developing constraint-based systems and applications. It provides a modular and extensible solver.") (license license:expat))) (define-public libflame (package (name "libflame") (version "5.2.0") (outputs '("out" "static")) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/flame/libflame") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1n6lf0wvpp77lxqlr721h2jbfbzigphdp19wq8ajiccilcksh7ay")))) (build-system gnu-build-system) (arguments `(#:configure-flags ;; Sensible defaults: https://github.com/flame/libflame/issues/28 (list "--enable-dynamic-build" "--enable-max-arg-list-hack" "--enable-lapack2flame" "--enable-verbose-make-output" "--enable-multithreading=pthreads" ; Openblas isn't built with openmp. ,@(if (any (cute string-prefix? <> (or (%current-target-system) (%current-system))) '("x86_64" "i686")) '("--enable-vector-intrinsics=sse") '()) "--enable-supermatrix" "--enable-memory-alignment=16" "--enable-ldim-alignment") #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-/usr/bin/env-bash (lambda _ (substitute* "build/config.mk.in" (("/usr/bin/env bash") (which "bash"))) #t)) (replace 'check (lambda* (#:key tests? #:allow-other-keys) (substitute* "test/Makefile" (("LIBBLAS .*") "LIBBLAS = -lblas\n") (("LIBLAPACK .*") "LIBLAPACK = -llapack\n")) (if tests? (with-directory-excursion "test" (mkdir "obj") (invoke "make") (invoke "./test_libflame.x")) #t))) (add-after 'install 'install-static (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (static (assoc-ref outputs "static"))) (mkdir-p (string-append static "/lib")) (rename-file (string-append out "/lib/libflame.a") (string-append static "/lib/libflame.a")) (install-file (string-append out "/include/FLAME.h") (string-append static "/include")) #t)))))) (inputs (list gfortran)) (native-inputs `(("lapack" ,lapack) ("openblas" ,openblas) ("perl" ,perl) ("python" ,python-wrapper))) (home-page "https://github.com/flame/libflame") (synopsis "High-performance object-based library for DLA computations") (description "@code{libflame} is a portable library for dense matrix computations, providing much of the functionality present in LAPACK, developed by current and former members of the @acronym{SHPC, Science of High-Performance Computing} group in the @url{https://www.ices.utexas.edu/, Institute for Computational Engineering and Sciences} at The University of Texas at Austin. @code{libflame} includes a compatibility layer, @code{lapack2flame}, which includes a complete LAPACK implementation.") (license license:bsd-3))) (define-public libpotassco ;; No public release, update together with clasp (let ((revision "1") (commit "2f9fb7ca2c202f1b47643aa414054f2f4f9c1821")) (package (name "libpotassco") (version (git-version "0.0" revision commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/potassco/libpotassco") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "1c32f9gqclf7qx07lpx8wd720vfhkjqhzc6nyy8mjmgwpmb3iyyn")))) (arguments `(#:configure-flags '("-DLIB_POTASSCO_BUILD_TESTS=on" "-DLIB_POTASSCO_INSTALL_LIB=on" "-DBUILD_SHARED_LIBS=on") #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-cmake (lambda _ (substitute* "CMakeLists.txt" ;; clasp expects lowercase potassco and include directory is ;; lowercase as well, so let's use that (("\"cmake/Potassco\"") "\"cmake/potassco\"") (("PotasscoConfig\\.cmake") "potassco-config.cmake") (("PotasscoConfigVersion\\.cmake") "potassco-config-version.cmake")) (rename-file "cmake/PotasscoConfig.cmake.in" "cmake/potassco-config.cmake.in")))))) (build-system cmake-build-system) (home-page "https://potassco.org/") (synopsis "Utility library for Potassco's projects") (description "@code{libpotassco} is a utility library providing functions and datatypes for @itemize @item parsing, writing, and converting logic programs in aspif and smodels format, @item passing information between a grounder and a solver, @item and defining and parsing command-line options and for creating command-line applications. @end itemize Furthermore, it comes with the tool @command{lpconvert} that converts either between aspif and smodels format or to a human-readable text format.") (license license:expat)))) (define-public clasp (package (name "clasp") (version "3.3.6") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/potassco/clasp") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0rahqiq530jckvx717858h1q5p8znp1kb6sjm95p8blkr4n3pvmj")))) (build-system cmake-build-system) (arguments `(#:configure-flags '("-DCLASP_BUILD_TESTS=on" "-DCLASP_INSTALL_LIB=on" "-DCLASP_USE_LOCAL_LIB_POTASSCO=off" "-DBUILD_SHARED_LIBS=on") #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-cmake (lambda _ (substitute* "CMakeLists.txt" ;; Use lowercase to be consistent with libpotassco (("\"cmake/Clasp\"") "\"cmake/clasp\"") (("ClaspConfig\\.cmake") "clasp-config.cmake") (("ClaspConfigVersion\\.cmake") "clasp-config-version.cmake")) (substitute* "cmake/ClaspConfig.cmake.in" (("find_package\\(Potassco") "find_package(potassco")) (rename-file "cmake/ClaspConfig.cmake.in" "cmake/clasp-config.cmake.in")))))) (inputs (list libpotassco)) (home-page "https://potassco.org/") (synopsis "Answer set solver") (description "clasp is an answer set solver for (extended) normal and disjunctive logic programs. The primary algorithm of clasp relies on conflict-driven nogood learning, a technique that proved very successful for satisfiability checking (SAT).") (license license:expat))) (define-public clingo (package (name "clingo") (version "5.5.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/potassco/clingo") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0rfjwkcwm0mmf3r4i7asyjwb6cia4i7px7fn2kdbi9j85qvas4pb")))) (build-system cmake-build-system) (arguments `(#:configure-flags `("-DCLINGO_BUILD_TESTS=on" "-DCLINGO_INSTALL_LIB=on" "-DCLINGO_BUILD_STATIC=off" "-DCLINGO_BUILD_SHARED=on" ;; XXX: Clingo requries private headers and ;; sources from clasp ,(string-append "-DCLASP_SOURCE_DIR=" (assoc-ref %build-inputs "clasp-src"))) #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-cmake (lambda _ (substitute* "CMakeLists.txt" (("add_subdirectory\\(clasp\\)") "find_package(clasp REQUIRED)")) (substitute* "libclingo/CMakeLists.txt" (("\"cmake/Clingo\"") "\"cmake/clingo\"") (("ClingoConfig\\.cmake") "clingo-config.cmake") (("ClingoConfigVersion\\.cmake") "clingo-config-version.cmake")) (substitute* "cmake/ClingoConfig.cmake.in" (("find_package\\(Clasp") "find_package(clasp")) (rename-file "cmake/ClingoConfig.cmake.in" "cmake/clingo-config.cmake.in"))) (add-after 'unpack 'skip-failing-tests (lambda _ (with-directory-excursion "libclingo/tests" (substitute* "CMakeLists.txt" (("COMMAND test_clingo" all) (string-append all " -f " "\"${CMAKE_CURRENT_SOURCE_DIR}/good.txt\""))) (call-with-output-file "good.txt" (lambda (port) (for-each (lambda (test) (format port "~s~%" test)) '("parse-ast-v2" "add-ast-v2" "build-ast-v2" "unpool-ast-v2" "parse_term" "propagator" "propgator-sequence-mining" "symbol" "visitor")))))))))) (inputs (list clasp libpotassco)) (native-inputs `(("clasp-src" ,(package-source clasp)))) (home-page "https://potassco.org/") (synopsis "Grounder and solver for logic programs") (description "Clingo computes answer sets for a given logic program.") (license license:expat))) (define-public ceres (package (name "ceres-solver") (version "2.0.0") (home-page "http://ceres-solver.org/") (source (origin (method url-fetch) (uri (string-append home-page "ceres-solver-" version ".tar.gz")) (sha256 (base32 "00vng9vnmdb1qga01m0why90m0041w7bn6kxa2h4m26aflfqla8h")))) (build-system cmake-build-system) (arguments ;; TODO: Build HTML user documentation and install separately. '(#:configure-flags '("-DBUILD_EXAMPLES=OFF" "-DBUILD_SHARED_LIBS=ON") #:phases (modify-phases %standard-phases (add-before 'configure 'set-library-directory (lambda _ ;; Install libraries to lib/, not lib64/. (substitute* "CMakeLists.txt" (("set\\(LIB_SUFFIX \"64\"\\)") "set(LIB_SUFFIX \"\")"))))))) (native-inputs (list pkg-config)) (propagated-inputs (list glog)) ;for #include (inputs (list eigen openblas lapack suitesparse gflags)) (synopsis "C++ library for solving large optimization problems") (description "Ceres Solver is a C++ library for modeling and solving large, complicated optimization problems. It is a feature rich, mature and performant library which has been used in production since 2010. Ceres Solver can solve two kinds of problems: @enumerate @item non-linear least squares problems with bounds constraints; @item general unconstrained optimization problems. @end enumerate\n") (license license:bsd-3) ;; Mark as tunable to take advantage of SIMD code in Eigen. (properties `((tunable? . #t))))) (define-public ceres-solver-benchmarks (package (inherit ceres) (name "ceres-solver-benchmarks") (arguments '(#:modules ((ice-9 popen) (ice-9 rdelim) (guix build utils) (guix build cmake-build-system)) #:phases (modify-phases %standard-phases (delete 'configure) (replace 'build (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (define flags (string-tokenize (read-line (open-pipe* OPEN_READ "pkg-config" "eigen3" "--cflags")))) (define (compile-file top-dir) (lambda (file) (let ((source (string-append file ".cc"))) (format #t "building '~a'...~%" file) (apply invoke "c++" "-fopenmp" "-O2" "-g" "-DNDEBUG" source "-lceres" "-lbenchmark" "-lglog" "-pthread" "-o" (string-append bin "/" file) "-I" top-dir flags)))) (mkdir-p bin) (with-directory-excursion "internal/ceres" (for-each (compile-file "..") '("schur_eliminator_benchmark" "small_blas_gemm_benchmark" "small_blas_gemv_benchmark")) (with-directory-excursion "autodiff_benchmarks" ((compile-file "../..") "autodiff_benchmarks")))))) (delete 'check) (delete 'install)))) (inputs (modify-inputs (package-inputs ceres) (prepend googlebenchmark ceres))) (synopsis "Benchmarks of the Ceres optimization problem solver"))) ;; For a fully featured Octave, users are strongly recommended also to install ;; the following packages: less, ghostscript, gnuplot. (define-public octave-cli (package (name "octave-cli") (version "7.1.0") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/octave/octave-" version ".tar.xz")) (sha256 (base32 "0wv26nsfi6cq80np6p4av4wfrvbaflca6szajf6c60mbpdg63m1z")))) (build-system gnu-build-system) (inputs `(("alsa-lib" ,alsa-lib) ("arpack" ,arpack-ng) ("bdb" ,bdb) ("curl" ,curl) ("fftw" ,fftw) ("fftwf" ,fftwf) ("fltk" ,fltk) ("fontconfig" ,fontconfig) ("freetype" ,freetype) ("gl2ps" ,gl2ps) ("glpk" ,glpk) ("glu" ,glu) ("graphicsmagick" ,graphicsmagick) ;; TODO: libjpeg-turbo is indirectly required through libtiff. In ;; the next rebuild cycle, add an absolute reference for -ljpeg in ;; libtiff.la instead of having to provide it here. ("libjpeg" ,libjpeg-turbo) ("hdf5" ,hdf5) ("lapack" ,lapack) ("libsndfile" ,libsndfile) ("libxft" ,libxft) ("mesa" ,mesa) ("pcre" ,pcre) ("portaudio" ,portaudio) ("qhull" ,qhull) ("readline" ,readline) ("suitesparse" ,suitesparse) ("texinfo" ,texinfo) ("zlib" ,zlib))) (native-inputs (list gfortran pkg-config perl ;; The following inputs are not actually used in the build process. ;; However, the ./configure gratuitously tests for their existence and ;; assumes that programs not present at build time are also not, and ;; can never be, available at run time! If these inputs are therefore ;; not present, support for them will be built out. However, Octave ;; will still run without them, albeit without the features they ;; provide. less ghostscript gnuplot)) ;; Octave code uses this variable to detect directories holding multiple CA ;; certificates to verify peers with. This is required for the networking ;; functions that require encryption to work properly. (native-search-paths (list (search-path-specification (variable "CURLOPT_CAPATH") (files '("etc/ssl/certs"))))) (arguments `(#:configure-flags (list (string-append "--with-shell=" (assoc-ref %build-inputs "bash") "/bin/sh") ;; XXX: Without this flag, linking octave-cli fails with ;; undefined references to 'logf@GLIBCXX_3.4' et.al. due to ;; not pulling in liboctinterp.la for -lstdc++. "--enable-link-all-dependencies") #:phases (modify-phases %standard-phases (add-after 'configure 'configure-makeinfo (lambda* (#:key inputs #:allow-other-keys) (substitute* "libinterp/corefcn/help.h" (("\"makeinfo\"") (string-append "\"" (assoc-ref inputs "texinfo") "/bin/makeinfo\""))) #t))))) (home-page "https://www.gnu.org/software/octave/") (synopsis "High-level language for numerical computation (no GUI)") (description "GNU Octave is a high-level interpreted language that is specialized for numerical computations. It can be used for both linear and non-linear applications and it provides great support for visualizing results. Work may be performed both at the interactive command-line as well as via script files.") (license license:gpl3+))) (define-public octave (package (inherit octave-cli) (name "octave") (inputs `(("qscintilla" ,qscintilla) ("qt" ,qtbase-5) ,@(package-inputs octave-cli))) (native-inputs `(("qttools-5" , qttools-5) ;for lrelease ("texlive" ,(texlive-updmap.cfg (list texlive-epsf))) ; for texi2dvi ,@(package-native-inputs octave-cli))) (arguments (substitute-keyword-arguments (package-arguments octave-cli) ((#:phases phases) `(modify-phases ,phases (add-before 'configure 'patch-qscintilla-library-name (lambda* (#:key inputs #:allow-other-keys) ;; The QScintilla library that the Octave configure script tries ;; to link with should be named libqscintilla-qt5.so, but the ;; QScintilla input provides the shared library as ;; libqscintilla2_qt5.so. (substitute* "configure" (("qscintilla2-qt5") "qscintilla2_qt5")) #t)))))) (synopsis "High-level language for numerical computation (with GUI)"))) (define-public opencascade-oce (package (name "opencascade-oce") (version "0.17.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/tpaviot/oce") (commit (string-append "OCE-" version)))) (file-name (git-file-name name version)) (patches (search-patches "opencascade-oce-glibc-2.26.patch")) (sha256 (base32 "0rg5wzkvfmzfl6v2amyryb8dnjad0nn9kyr607wy2gch6rciah69")))) (build-system cmake-build-system) (arguments '(#:configure-flags (list "-DOCE_TESTING:BOOL=ON" "-DOCE_USE_TCL_TEST_FRAMEWORK:BOOL=ON" "-DOCE_DRAW:BOOL=ON" (string-append "-DOCE_INSTALL_PREFIX:PATH=" (assoc-ref %outputs "out")) "-UCMAKE_INSTALL_RPATH"))) (inputs (list freetype glu libxmu mesa tcl tk)) (native-inputs `(("python" ,python-wrapper))) (home-page "https://github.com/tpaviot/oce") (synopsis "Libraries for 3D modeling and numerical simulation") (description "Open CASCADE is a set of libraries for the development of applications dealing with 3D CAD data or requiring industrial 3D capabilities. It includes C++ class libraries providing services for 3D surface and solid modeling, CAD data exchange, and visualization. It is used for development of specialized software dealing with 3D models in design (CAD), manufacturing (CAM), numerical simulation (CAE), measurement equipment (CMM), and quality control (CAQ) domains. This is the ``Community Edition'' (OCE) of Open CASCADE, which gathers patches, improvements, and experiments contributed by users over the official Open CASCADE library.") (license (list license:lgpl2.1; OCE libraries, with an exception for the ; use of header files; see ; OCCT_LGPL_EXCEPTION.txt license:public-domain; files ; src/Standard/Standard_StdAllocator.hxx and ; src/NCollection/NCollection_StdAllocator.hxx license:expat; file src/OpenGl/OpenGl_glext.h license:bsd-3)))); test framework gtest (define-public opencascade-occt (package (name "opencascade-occt") (version "7.6.0") (source (origin (method git-fetch) (uri (git-reference (url "https://git.dev.opencascade.org/repos/occt.git") (commit (string-append "V" (string-map (lambda (x) (if (eq? x #\.) #\_ x)) version))))) (file-name (git-file-name name version)) (sha256 (base32 "1rcwm9fkx0j4wrsyikb6g7qd611kpry7dand5dzdjvs5vzd13zvd")) (modules '((guix build utils))) (snippet '(begin ;; Remove files specific to non-free operating systems. (delete-file-recursively "samples/ios") (delete-file-recursively "samples/mfc") (delete-file-recursively "samples/qt/FuncDemo") (delete-file "genconf.bat") (delete-file "gendoc.bat") (delete-file "genproj.bat") (delete-file "upgrade.bat") ;; Remove references to deleted files. (substitute* "dox/FILES_HTML.txt" ((".*standard.*") "" ) ((".*UIKitSample.*") "")) #t)))) (build-system cmake-build-system) (arguments '(;; There is no test target for make. OCCT provides an ;; 'Automated Testing System', which may be accessed after ;; installation via the draw.sh script. draw.sh is located in ;; the bin directory. For details see: ;; https://www.opencascade.com/doc/occt-7.3.0/overview/html/\ ;; occt_dev_guides__tests.html #:tests? #f ;; Configure without freeimage: attempting to link against the ;; freeimage version 3.17 library leads to 'undefined ;; reference' errors. #:configure-flags (list "-DUSE_FREEIMAGE:BOOL=OFF" "-DUSE_TBB:BOOL=ON" "-DUSE_VTK:BOOL=OFF" "-DBUILD_DOC_Overview:BOOL=OFF" "-DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON" "-DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON" "-UCMAKE_INSTALL_LIBDIR"))) (native-inputs (list fontconfig)) (inputs (list doxygen ;("freeimage" ,freeimage) freetype glu libxext libxi libxmu mesa tbb-2020 tcl tk)) ;; TODO: build Overview documentation and add 'doc' output. (home-page "https://www.opencascade.com") (synopsis "Libraries for 3D modeling and numerical simulation") (description "Open CASCADE is a set of libraries for the development of applications dealing with 3D CAD data or requiring industrial 3D capabilities. It includes C++ class libraries providing services for 3D surface and solid modeling, CAD data exchange, and visualization. It is used for development of specialized software dealing with 3D models in design (CAD), manufacturing (CAM), numerical simulation (CAE), measurement equipment (CMM), and quality control (CAQ) domains. This is the certified version of the Open Cascade Technology (OCCT) library.") (license (list ;; OCCT library: license:lgpl2.1; with an exception for the use of header ; files, see OCCT_LGPL_EXCEPTION.txt. ;; Files src/OpenGl/glext.h, adm/cmake/cotire.cmake and ;; src/OpenGl/OpenGl_HaltonSampler.hxx: license:expat ;; Files src/ExprIntrp/ExprIntrp.tab.* and ;; src/StepFile/step.tab.*: license:gpl3+ ; with Bison 2.2 exception. ;; File src/NCollection/NCollection_UtfIterator.lxx: (license:non-copyleft "https://www.unicode.org/license.html") ;; File src/NCollection/NCollection_StdAllocator.hxx: license:public-domain)))) (define-public gmsh (package (name "gmsh") (version "4.10.5") (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.onelab.info/gmsh/gmsh.git") (commit (string-append "gmsh_" (string-replace-substring version "." "_"))))) (file-name (git-file-name name version)) (sha256 (base32 "08p39yjgf3lbnjg90skpmsq9n1a9pmwppdmy5s94dc6sq2nfr7xl")) (modules '((guix build utils))) (snippet '(delete-file-recursively "contrib/metis")))) (build-system cmake-build-system) (propagated-inputs (list fltk gfortran glu gmp hdf5 lapack libx11 libxext mesa metis opencascade-occt)) (inputs (list fontconfig libxft python)) (arguments `(#:configure-flags `("-DENABLE_SYSTEM_CONTRIB:BOOL=ON" "-DENABLE_BUILD_SHARED:BOOL=ON" "-DENABLE_BUILD_DYNAMIC:BOOL=ON") #:imported-modules (,@%cmake-build-system-modules (guix build python-build-system)) #:modules (((guix build python-build-system) #:select (site-packages)) (guix build cmake-build-system) (guix build utils)) #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-paths (lambda* (#:key inputs outputs #:allow-other-keys) ;; Use the standard Guix site-package path for ;; installation of the Python API. (substitute* "CMakeLists.txt" (("include\\(GNUInstallDirs\\)\n") (string-append "include(GNUInstallDirs)\n" " set(GMSH_PY_LIB " (site-packages inputs outputs) ")\n")) (("\\$\\{GMSH\\_PY\\} DESTINATION \\$\\{GMSH\\_LIB\\}") "${GMSH_PY} DESTINATION ${GMSH_PY_LIB}")) ;; Find the shared library. (let ((libgmsh (string-append (assoc-ref outputs "out") "/lib/libgmsh.so"))) (substitute* "api/gmsh.py" (("find_library\\(\"gmsh\"\\)") (simple-format #f "\"~a\"" libgmsh))))))))) (home-page "http://gmsh.info/") (synopsis "3D finite element grid generator") (description "Gmsh is a 3D finite element grid generator with a built-in CAD engine and post-processor. Its design goal is to provide a fast, light and user-friendly meshing tool with parametric input and advanced visualization capabilities. Gmsh is built around four modules: geometry, mesh, solver and post-processing. The specification of any input to these modules is done either interactively using the graphical user interface or in ASCII text files using Gmsh's own scripting language.") (license license:gpl2+))) (define-public veusz (package (name "veusz") (version "3.3.1") (source (origin (method url-fetch) (uri (pypi-uri "veusz" version)) (sha256 (base32 "1q7hi1qwwg4pgiz62isvv1pia85m13bspdpp1q3mrnwl11in0ag0")))) (build-system python-build-system) (arguments `(;; Tests will fail because they depend on optional packages like ;; python-astropy, which is not packaged. #:tests? #f #:phases (modify-phases %standard-phases ;; Veusz will append 'PyQt5' to sip_dir by default. That is not how ;; the path is defined in Guix, therefore we have to change it. (add-after 'unpack 'fix-sip-dir (lambda _ (substitute* "pyqtdistutils.py" (("os.path.join\\(sip_dir, 'PyQt5'\\)") "sip_dir")) #t)) ;; Now we have to pass the correct sip_dir to setup.py. (replace 'build (lambda* (#:key inputs #:allow-other-keys) ;; We need to tell setup.py where to locate QtCoremod.sip ((@@ (guix build python-build-system) call-setuppy) "build_ext" (list (string-append "--sip-dir=" (assoc-ref inputs "python-pyqt") "/share/sip")) #t))) ;; Ensure that icons are found at runtime. (add-after 'install 'wrap-executable (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (wrap-program (string-append out "/bin/veusz") `("QT_PLUGIN_PATH" prefix ,(list (string-append (assoc-ref inputs "qtsvg") "/lib/qt5/plugins/")))))))))) (native-inputs (list pkg-config ;;("python-astropy" ,python-astropy) ;; FIXME: Package this. qttools-5 python-sip-4)) (inputs (list ghostscript ;optional, for EPS/PS output python-dbus python-h5py ;optional, for HDF5 data python-pyqt qtbase-5 qtsvg-5)) (propagated-inputs (list python-numpy)) (home-page "https://veusz.github.io/") (synopsis "Scientific plotting package") (description "Veusz is a scientific plotting and graphing program with a graphical user interface, designed to produce publication-ready 2D and 3D plots. In addition it can be used as a module in Python for plotting. It supports vector and bitmap output, including PDF, Postscript, SVG and EMF.") (license license:gpl2+))) (define-public maxflow (package (name "maxflow") ;; Versioning is ambiguous: the git tag matching this commit is ‘3.0.5’, ;; which matches CMakeLists.txt, but README.md and CHANGES say ‘3.04’. (version "3.0.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/gerddie/maxflow") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0rll38whw55h0vcjrrwdnh9ascvxby0ph7n1l0d12z17cg215kkb")))) (build-system cmake-build-system) (home-page "https://pub.ist.ac.at/~vnk/software.html") (synopsis "Library implementing Maxflow algorithm") (description "An implementation of the maxflow algorithm described in @cite{An Experimental Comparison of Min-Cut/Max-Flow Algorithms for Energy Minimization in Computer Vision.\n Yuri Boykov and Vladimir Kolmogorov.\n In IEEE Transactions on Pattern Analysis and Machine Intelligence,\n September 2004}") (license license:gpl3+))) (define-public petsc (package (name "petsc") (version "3.16.1") (source (origin (method url-fetch) ;; The *-lite-* tarball does not contain the *large* documentation (uri (string-append "http://ftp.mcs.anl.gov/pub/petsc/release-snapshots/" "petsc-lite-" version ".tar.gz")) (sha256 (base32 "0sm03vpg010q9icidiq587n325m0598cj6hab2rdv85nwyygg74h")))) (outputs '("out" ; libraries and headers "examples")) ; ~30MiB of examples (build-system gnu-build-system) (native-inputs (list python which)) (inputs (list gfortran openblas superlu ;; leaving out hdf5 and fftw, as petsc expects them to be built with mpi ;; leaving out opengl, as configuration seems to only be for mac )) (arguments (list #:test-target "test" #:parallel-build? #f ; build is parallel by default #:configure-flags #~(list "--with-mpi=0" "--with-openmp=1" "--with-openblas=1" (string-append "--with-openblas-dir=" #$(this-package-input "openblas")) "--with-superlu=1") #:make-flags ;; Honor (parallel-job-count) for build. Do not use --with-make-np, ;; whose value is dumped to $out/lib/petsc/conf/petscvariables. #~(list (format #f "MAKE_NP=~a" (parallel-job-count))) #:phases #~(modify-phases %standard-phases (replace 'configure ;; PETSc's configure script is actually a python script, so we can't ;; run it with bash. (lambda* (#:key outputs (configure-flags '()) #:allow-other-keys) (let* ((prefix (assoc-ref outputs "out")) (flags `(,(string-append "--prefix=" prefix) ,@configure-flags))) (format #t "build directory: ~s~%" (getcwd)) (format #t "configure flags: ~s~%" flags) (apply invoke "./configure" flags) ;; Generate test scripts with the right shebang. (substitute* "config/example_template.py" (("#!/usr/bin/env bash") (string-append "#!" (which "bash"))))))) (add-after 'configure 'clean-local-references (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (substitute* (find-files "." "^petsc(conf|machineinfo).h$") ;; Prevent build directory from leaking into compiled code (((getcwd)) out) ;; Scrub timestamp for reproducibility ((".*Libraries compiled on.*") "")) (substitute* (find-files "." "petscvariables") ;; Do not expose build machine characteristics, set to defaults. (("MAKE_NP = [:digit:]+") "MAKE_NP = 2") (("NPMAX = [:digit:]+") "NPMAX = 2"))))) (add-after 'install 'clean-install ;; Try to keep installed files from leaking build directory names. (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (substitute* (map (lambda (file) (string-append out "/lib/petsc/conf/" file)) '("petscvariables")) (((getcwd)) out)) ;; Make compiler references point to the store (substitute* (string-append out "/lib/petsc/conf/petscvariables") (("= (gcc|g\\+\\+|gfortran)" _ compiler) (string-append "= " (which compiler)))) ;; PETSc installs some build logs, which aren't necessary. (for-each (lambda (file) (let ((f (string-append out "/lib/petsc/conf/" file))) (when (file-exists? f) (delete-file f)))) '("configure.log" "make.log" "gmake.log" "test.log" "error.log" "RDict.db" "PETScBuildInternal.cmake" ;; Once installed, should uninstall with Guix "uninstall.py"))))) (add-after 'install 'move-examples (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (examples (assoc-ref outputs "examples")) (exdir (string-append out "/share/petsc/examples")) (exdir' (string-append examples "/share/petsc/examples"))) (copy-recursively exdir exdir') (delete-file-recursively exdir))))))) (home-page "https://www.mcs.anl.gov/petsc") (synopsis "Library to solve PDEs") (description "PETSc, pronounced PET-see (the S is silent), is a suite of data structures and routines for the scalable (parallel) solution of scientific applications modeled by partial differential equations.") (license (license:non-copyleft "https://www.mcs.anl.gov/petsc/documentation/copyright.html")))) (define-public petsc-complex (package (inherit petsc) (name "petsc-complex") (arguments (substitute-keyword-arguments (package-arguments petsc) ((#:configure-flags cf) #~(cons "--with-scalar-type=complex" #$cf)))) (synopsis "Library to solve PDEs (with complex scalars)"))) (define-public petsc-openmpi (package (inherit petsc) (name "petsc-openmpi") (inputs (modify-inputs (package-inputs petsc) (prepend hdf5-parallel-openmpi hypre-openmpi metis mumps-openmpi openmpi scalapack pt-scotch32 `(,pt-scotch32 "metis")))) (arguments (substitute-keyword-arguments (package-arguments petsc) ((#:configure-flags cf) #~`("--with-hypre=1" "--with-mpiexec=mpirun" "--with-metis=1" "--with-mumps=1" "--with-scalapack=1" "--with-ptscotch=1" ,(string-append "--with-mpi-dir=" #$(this-package-input "openmpi")) ,(string-append "--with-hdf5-include=" #$(this-package-input "hdf5-parallel-openmpi") "/include") ,(string-append "--with-hdf5-lib=" #$(this-package-input "hdf5-parallel-openmpi") "/lib/libhdf5.a") ,@(delete "--with-mpi=0" #$cf))) ((#:phases phases) #~(modify-phases #$phases (add-before 'configure 'adjust-pt-scotch-library-names (lambda _ ;; Adjust to the library name changes in Scotch 7.0. (substitute* "config/BuildSystem/config/packages/PTScotch.py" (("libptesmumps") "libesmumps") (("libptscotchparmetis") "libptscotchparmetisv3")))) (add-before 'configure 'mpi-setup #$%openmpi-setup) (add-after 'install 'patch-header-inclusions ;; TODO: Replace with ‘patch-header-inclusions’ when (some form ;; of) https://issues.guix.gnu.org/54780#19 is merged. (lambda _ (substitute* (string-append #$output "/include/petsclayouthdf5.h") (("<(H5Ipublic.h)>" _ header) (format #f "<~a/include/~a>" #$(this-package-input "hdf5-parallel-openmpi") header))))))))) (synopsis "Library to solve PDEs (with MUMPS and MPI support)"))) (define-public petsc-complex-openmpi (package (inherit petsc-complex) (name "petsc-complex-openmpi") (inputs (modify-inputs (package-inputs petsc-complex) (prepend openmpi))) (arguments (substitute-keyword-arguments (package-arguments petsc-complex) ((#:configure-flags cf) #~`("--with-mpiexec=mpirun" ,(string-append "--with-mpi-dir=" #$(this-package-input "openmpi")) ,@(delete "--with-mpi=0" #$cf))) ((#:phases phases) #~(modify-phases #$phases (add-before 'configure 'mpi-setup #$%openmpi-setup))))) (synopsis "Library to solve PDEs (with complex scalars and MPI support)"))) (define-public python-petsc4py (package (name "python-petsc4py") (version "3.16.1") (source (origin (method url-fetch) (uri (pypi-uri "petsc4py" version)) (sha256 (base32 "0pxr6qa7p0pmpq0av29lx8lzlrdcfdzj87ynixzr8dn42y13a662")) (modules '((guix build utils))) (snippet '(begin ;; Ensure source file is regenerated in the build phase. (delete-file "src/petsc4py.PETSc.c") ;; Remove legacy GC code. See ;; https://bitbucket.org/petsc/petsc4py/issues/125. (substitute* "src/PETSc/cyclicgc.pxi" ((".*gc_refs.*") "" ) ((".*PyGC_Head.*") "")) #t)))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'build 'pre-build (lambda _ ;; Define path to PETSc installation. (setenv "PETSC_DIR" (assoc-ref %build-inputs "petsc")) #t)) (add-before 'check 'mpi-setup ,%openmpi-setup)))) (native-inputs (list python-cython)) (inputs `(("petsc" ,petsc-openmpi) ("python-numpy" ,python-numpy))) (home-page "https://bitbucket.org/petsc/petsc4py/") (synopsis "Python bindings for PETSc") (description "PETSc, the Portable, Extensible Toolkit for Scientific Computation, is a suite of data structures and routines for the scalable (parallel) solution of scientific applications modeled by partial differential equations. It employs the MPI standard for all message-passing communication. @code{petsc4py} provides Python bindings to almost all functions of PETSc.") (license license:bsd-3))) (define-public python-kiwisolver (package (name "python-kiwisolver") (version "1.0.1") (source (origin (method url-fetch) (uri (pypi-uri "kiwisolver" version)) (sha256 (base32 "0y22ci86znwwwfhbmvbgdfnbi6lv5gv2xkdlxvjw7lml43ayafyf")))) (build-system python-build-system) (home-page "https://github.com/nucleic/kiwi") (synopsis "Fast implementation of the Cassowary constraint solver") (description "Kiwi is an efficient C++ implementation of the Cassowary constraint solving algorithm. Kiwi has been designed from the ground up to be lightweight and fast. Kiwi ranges from 10x to 500x faster than the original Cassowary solver with typical use cases gaining a 40x improvement. Memory savings are consistently > 5x.") (license license:bsd-3))) (define-public slepc (package (name "slepc") (version "3.16.1") (source (origin (method url-fetch) (uri (string-append "http://slepc.upv.es/download/distrib/slepc-" version ".tar.gz")) (sha256 (base32 "1ysfm77s5fcissv3q0k5d65mlp93zi4anqg62q3cd25dn66sva5i")))) (build-system gnu-build-system) (native-inputs `(("python" ,python) ("which" ,which) ("petsc:examples" ,petsc "examples"))) ;for gmakegen.py script (inputs `(("arpack" ,arpack-ng) ("gfortran" ,gfortran))) (propagated-inputs (list petsc)) (arguments `(#:parallel-build? #f ;build is parallel by default #:configure-flags `(,(string-append "--with-arpack-dir=" (assoc-ref %build-inputs "arpack") "/lib")) #:make-flags ;honor (parallel-job-count) `(,(format #f "MAKE_NP=~a" (parallel-job-count)) ,(string-append "PETSCCONFIGDIR=" (assoc-ref %build-inputs "petsc:examples") "/share/petsc/examples/config")) #:phases (modify-phases %standard-phases (replace 'configure ;; configure is a python script, so we can't run it with bash. (lambda* (#:key inputs outputs (configure-flags '()) #:allow-other-keys) (let* ((prefix (assoc-ref outputs "out")) (flags `(,(string-append "--prefix=" prefix) ,@configure-flags))) (format #t "build directory: ~s~%" (getcwd)) (format #t "configure flags: ~s~%" flags) (setenv "SLEPC_DIR" (getcwd)) (setenv "PETSC_DIR" (assoc-ref inputs "petsc")) (apply invoke "./configure" flags)))) (add-after 'install 'delete-doc ;; TODO: SLEPc installs HTML documentation alongside headers in ;; $out/include. We'd like to move them to share/doc, but delete ;; them for now, as they are incomplete and installing the complete ;; documentation is difficult. (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out"))) (for-each delete-file (find-files out "\\.html$")) #t))) (add-after 'install 'clean-install ;; Clean up unnecessary build logs from installation. (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (for-each (lambda (file) (let ((f (string-append out "/lib/slepc/conf/" file))) (when (file-exists? f) (delete-file f)))) '("configure.log" "make.log" "gmake.log" "test.log" "error.log" "RDict.db" "uninstall.py")) #t)))))) (home-page "https://slepc.upv.es") (synopsis "Scalable library for eigenproblems") (description "SLEPc is a software library for the solution of large sparse eigenproblems on parallel computers. It can be used for the solution of linear eigenvalue problems formulated in either standard or generalized form, as well as other related problems such as the singular value decomposition. The emphasis of the software is on methods and techniques appropriate for problems in which the associated matrices are sparse, for example, those arising after the discretization of partial differential equations.") (license license:bsd-2) (properties `((release-monitoring-url . "http://slepc.upv.es/download/"))))) (define-public slepc-complex (package (inherit slepc) (name "slepc-complex") (propagated-inputs `(("petsc" ,petsc-complex) ,@(alist-delete "petsc" (package-propagated-inputs slepc)))) (synopsis "Scalable library for eigenproblems (with complex scalars)"))) (define-public slepc-openmpi (package (inherit slepc) (name "slepc-openmpi") (arguments (substitute-keyword-arguments (package-arguments slepc) ((#:phases phases '%standard-phases) `(modify-phases ,phases (add-before 'check 'mpi-setup ,%openmpi-setup))))) (inputs `(("mpi" ,openmpi) ,@(alist-delete "arpack" (package-inputs slepc)))) (propagated-inputs `(("petsc" ,petsc-openmpi) ("arpack" ,arpack-ng-openmpi) ,@(alist-delete "petsc" (package-propagated-inputs slepc)))) (synopsis "Scalable library for eigenproblems (with MPI support)"))) (define-public slepc-complex-openmpi (package (inherit slepc-openmpi) (name "slepc-complex-openmpi") (propagated-inputs `(("petsc" ,petsc-complex-openmpi) ,@(alist-delete "petsc" (package-propagated-inputs slepc-openmpi)))) (synopsis "Scalable library for eigenproblems (with complex scalars and MPI support)"))) (define-public python-slepc4py (package (name "python-slepc4py") (version "3.16.1") (source (origin (method url-fetch) (uri (pypi-uri "slepc4py" version)) (sha256 (base32 "0fq997y73ymvcvdrxycp450pxwdgnqaw62gv9rwncfgsfplkvs9w")))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'build 'pre-build (lambda _ ;; Define path to PETSc installation. (setenv "PETSC_DIR" (assoc-ref %build-inputs "petsc")) ;; Define path to SLEPc installation. (setenv "SLEPC_DIR" (assoc-ref %build-inputs "slepc")) #t)) (add-before 'check 'mpi-setup ,%openmpi-setup)))) (inputs `(("python-numpy" ,python-numpy) ("python-petsc4py" ,python-petsc4py) ("slepc" ,slepc-openmpi))) (home-page "https://bitbucket.org/slepc/slepc4py/") (synopsis "Python bindings for SLEPc") (description "SLEPc, the Scalable Library for Eigenvalue Problem Computations, is based on PETSc, the Portable, Extensible Toolkit for Scientific Computation. It employs the MPI standard for all message-passing communication. @code{slepc4py} provides Python bindings to almost all functions of SLEPc.") (license license:bsd-3))) (define-public metamath (package (name "metamath") (version "0.193") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/metamath/metamath-exe") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1s9hyknfvhj86g3giayyf3dxzg23iij0rs7bdvj075v9qbyhqn9b")))) (build-system gnu-build-system) (native-inputs (list autoconf automake)) (home-page "http://us.metamath.org/") (synopsis "Proof verifier based on a minimalistic formalism") (description "Metamath is a tiny formal language and that can express theorems in abstract mathematics, with an accompyaning @command{metamath} executable that verifies databases of these proofs. There is a public database, @url{https://github.com/metamath/set.mm, set.mm}, implementing first-order logic and Zermelo-Frenkel set theory with Choice, along with a large swath of associated, high-level theorems, e.g.@: the fundamental theorem of arithmetic, the Cauchy-Schwarz inequality, Stirling's formula, etc. See the Metamath book.") (license license:gpl2+))) (define-public minizinc (package (name "minizinc") (version "2.5.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/MiniZinc/libminizinc") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "10b2hsl1fx9psh0iagmp8ki3f60f3qg5hmvra5aczjlfmbl88ggp")) (modules '((guix build utils) (ice-9 ftw) (srfi srfi-1))) (snippet '(begin ;; Do not advertise proprietary solvers (with-directory-excursion "cmake/targets" (let ((targets '("libminizinc_fzn.cmake" "libminizinc_gecode.cmake" "libminizinc_mip.cmake" "libminizinc_nl.cmake" "libminizinc_osicbc.cmake" "libminizinc_parser.cmake" "libmzn.cmake" "minizinc.cmake" "mzn2doc.cmake"))) (for-each delete-file (remove (lambda (file) (member file (cons* "." ".." targets))) (scandir "."))) (substitute* "libmzn.cmake" (("include\\(cmake/targets/(.*)\\)" all target) (if (member target targets) all ""))))) (with-directory-excursion "include/minizinc/solvers/MIP" (for-each delete-file (remove (lambda (file) (member file '("." ".." "MIP_osicbc_solverfactory.hh" "MIP_osicbc_wrap.hh" "MIP_solverinstance.hh" "MIP_solverinstance.hpp" "MIP_wrap.hh"))) (scandir ".")))) (with-directory-excursion "solvers/MIP" (for-each delete-file (remove (lambda (file) (member file '("." ".." "MIP_osicbc_solverfactory.cpp" "MIP_osicbc_wrap.cpp" "MIP_solverinstance.cpp" "MIP_wrap.cpp"))) (scandir ".")))) (substitute* "CMakeLists.txt" (("find_package\\(([^ ]*).*\\)" all pkg) (if (member pkg '("Gecode" "OsiCBC" "Threads")) all ""))) ;; TODO: swap out miniz for zlib #t)))) (build-system cmake-build-system) (arguments `(#:tests? #f ; no ‘check’ target #:modules ((guix build cmake-build-system) (guix build utils) (srfi srfi-1)) #:phases (modify-phases %standard-phases (add-after 'install 'install-solver-configs (lambda* (#:key inputs outputs #:allow-other-keys) (let ((gecode (assoc-ref inputs "gecode")) (pkgdatadir (string-append (assoc-ref outputs "out") "/share/minizinc"))) (call-with-output-file (string-append pkgdatadir "/Preferences.json") (lambda (port) (display "\ { \"tagDefaults\": [ [\"\", \"org.gecode.gecode\"], [\"gecode\", \"org.gecode.gecode\"] ], \"solverDefaults\": [] }" port) (newline port))) (mkdir-p (string-append pkgdatadir "/solvers")) (call-with-output-file (string-append pkgdatadir "/solvers/gecode.msc") (lambda (port) (format port "\ { \"id\": \"org.gecode.gecode\", \"name\": \"Gecode\", \"description\": \"Gecode FlatZinc executable\", \"version\": ~s, \"mznlib\": ~s, \"executable\": ~s, \"supportsMzn\": false, \"supportsFzn\": true, \"needsSolns2Out\": true, \"needsMznExecutable\": false, \"needsStdlibDir\": false, \"isGUIApplication\": false }" (last (string-split gecode #\-)) (string-append gecode "/share/gecode/mznlib") (string-append gecode "/bin/fzn-gecode")) (newline port))))))))) (native-inputs (list bison flex)) (inputs (list cbc gecode zlib)) (home-page "https://www.minizinc.org") (synopsis "High-level constraint modeling language") (description "MiniZinc is a high-level modeling language for constraint satisfaction and optimization problems. Models are compiled to FlatZinc, a language understood by many solvers.") (license license:mpl2.0))) (define-public mumps (package (name "mumps") (version "5.5.1") (source (origin (method url-fetch) (uri (list (string-append "http://mumps.enseeiht.fr/MUMPS_" version ".tar.gz") (string-append "https://ftp.mcs.anl.gov/pub/petsc/externalpackages" "/MUMPS_" version ".tar.gz"))) (sha256 (base32 "05gs2i8b76m9flm1826fxpyfnwibjjawbmfza3ylrvj7zaag5gqs")))) (build-system gnu-build-system) (inputs (list gfortran ;; These are required for linking against mumps, but we let the user ;; declare the dependency. openblas metis scotch)) (arguments `(#:modules ((ice-9 match) (ice-9 popen) (srfi srfi-1) ,@%gnu-build-system-modules) #:phases (modify-phases %standard-phases (replace 'configure (lambda* (#:key inputs outputs #:allow-other-keys) (call-with-output-file "Makefile.inc" (lambda (port) (format port " PLAT = LIBEXT = .a LIBEXT_SHARED = .so OUTC = -o OUTF = -o BLASDIR = ~a LIBBLAS = -Wl,-rpath=$(BLASDIR)/lib -Wl,-rpath='$$ORIGIN' LIBBLAS += -L$(BLASDIR)/lib LIBBLAS += -lopenblas~@[ SCALAPDIR = ~a SCALAP = -Wl,-rpath=$(SCALAPDIR)/lib -Wl,-rpath='$$ORIGIN' SCALAP += -L$(SCALAPDIR)/lib -lscalapack~] RM = rm -f~:[ CC = gcc FC = gfortran FL = gfortran INCSEQ = -I$(topdir)/libseq LIBSEQ = $(LAPACK) -L$(topdir)/libseq -lmpiseq LIBSEQNEEDED = libseqneeded INCS = $(INCSEQ) LIBS = $(LIBSEQ)~; CC = mpicc FC = mpifort FL = mpifort INCPAR = LIBPAR = $(SCALAP) $(LAPACK) LIBSEQNEEDED = INCS = $(INCPAR) LIBS = $(LIBPAR)~] AR = ar vr # rules require trailing space, ugh... RANLIB = ranlib LIBOTHERS = -pthread CDEFS = -DAdd_ PIC = -fPIC FPIC_OPT = $(PIC) RPATH_OPT = -Wl,-rpath,~a/lib OPTF = -O2 -fopenmp -DALLOW_NON_INIT -DBLR_MT OPTF += -fallow-argument-mismatch $(PIC) OPTL = -O2 -fopenmp $(PIC) OPTC = -O2 -fopenmp $(PIC) LPORDDIR = $(topdir)/PORD/lib IPORD = -I$(topdir)/PORD/include LPORD = $(LPORDDIR)/libpord.a ORDERINGSF = -Dpord~@[ METISDIR = ~a IMETIS = -I$(METISDIR)/include LMETIS = -Wl,-rpath $(METISDIR)/lib -L$(METISDIR)/lib -lmetis ORDERINGSF += -Dmetis~]~@[~:{ SCOTCHDIR = ~a ISCOTCH = -I$(SCOTCHDIR)/include LSCOTCH = -Wl,-rpath $(SCOTCHDIR)/lib -L$(SCOTCHDIR)/lib ~a -lesmumps LSCOTCH += -lscotch -lscotcherr ORDERINGSF += ~a~}~] ORDERINGSC = $(ORDERINGSF) LORDERINGS = $(LPORD) $(LMETIS) $(LSCOTCH) IORDERINGSF = $(ISCOTCH) IORDERINGSC = $(IPORD) $(IMETIS) $(ISCOTCH)" (assoc-ref inputs "openblas") (assoc-ref inputs "scalapack") (->bool (which "mpicc")) ;; MPI support enabled? (assoc-ref outputs "out") (assoc-ref inputs "metis") (match (list (assoc-ref inputs "pt-scotch") (assoc-ref inputs "scotch")) ((#f #f) #f) ((#f scotch) `((,scotch "" "-Dscotch"))) ((ptscotch _) `((,ptscotch "-lesmumps -lptscotch -lptscotcherr " "-Dptscotch"))))))))) (replace 'build ;; By default only the d-precision library is built. Make with "all" ;; target so that all precision libraries and examples are built. ;; Then, "make allshared" builts equivalent shared libraries as well. (lambda _ (invoke "make" "all" (format #f "-j~a" (parallel-job-count))) (invoke "make" "allshared" (format #f "-j~a" (parallel-job-count))))) (replace 'check ;; Run the simple test drivers, which read test input from stdin: ;; from the "real" input for the single- and double-precision ;; testers, and from the "cmplx" input for complex-precision ;; testers. The EXEC-PREFIX key is used by the mumps-openmpi ;; package to prefix execution with "mpirun". (lambda* (#:key (exec-prefix '()) #:allow-other-keys) (with-directory-excursion "examples" (every (lambda (prec type) (let ((tester (apply open-pipe* `(,OPEN_WRITE ,@exec-prefix ,(string-append "./" prec "simpletest")))) (input (open-input-file (string-append "input_simpletest_" type)))) (begin (dump-port input tester) (close-port input) (zero? (close-pipe tester))))) '("s" "d" "c" "z") '("real" "real" "cmplx" "cmplx"))))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (libdir (string-append out "/lib"))) (copy-recursively "lib" libdir) (copy-recursively "include" (string-append out "/include")) (when (file-exists? "libseq/libmpiseq.a") (install-file "libseq/libmpiseq.a" libdir)) (when (file-exists? "libseq/libmpiseq.so") (install-file "libseq/libmpiseq.so" libdir)) #t)))))) (home-page "http://mumps.enseeiht.fr") (synopsis "Multifrontal sparse direct solver") (description "MUMPS (MUltifrontal Massively Parallel sparse direct Solver) solves a sparse system of linear equations A x = b using Gaussian elimination.") (license license:cecill-c))) (define-public mumps-metis (package (inherit mumps) (name "mumps-metis") (inputs (modify-inputs (package-inputs mumps) (delete "scotch"))))) (define-public mumps-openmpi (package (inherit mumps) (name "mumps-openmpi") (inputs (modify-inputs (package-inputs mumps) (delete "scotch") (prepend openmpi scalapack pt-scotch))) (arguments (substitute-keyword-arguments (package-arguments mumps) ((#:phases phases) `(modify-phases ,phases (add-before 'check 'mpi-setup ,%openmpi-setup) (replace 'check (lambda _ ((assoc-ref ,phases 'check) #:exec-prefix '("mpirun" "-n" "2")))))))) (synopsis "Multifrontal sparse direct solver (with MPI)"))) (define-public mumps-metis-openmpi (package (inherit mumps-openmpi) (name "mumps-metis-openmpi") (inputs (modify-inputs (package-inputs mumps-openmpi) (delete "pt-scotch"))))) (define-public ruby-asciimath (package (name "ruby-asciimath") (version "2.0.4") (source (origin (method url-fetch) (uri (rubygems-uri "asciimath" version)) (sha256 (base32 "1fy2jrn3gr7cl33qydp3pwyfilcmb4m4z6hfhnvydzg8r3srp36j")))) (build-system ruby-build-system) (native-inputs (list ruby-nokogiri ruby-rspec)) (synopsis "AsciiMath parsing and conversion library") (description "A pure Ruby AsciiMath parsing and conversion library. AsciiMath is an easy-to-write markup language for mathematics.") (home-page "https://github.com/asciidoctor/asciimath") (license license:expat))) (define-public superlu (package (name "superlu") (version "5.3.0") (source (origin (method url-fetch) (uri (string-append "https://portal.nersc.gov/project/sparse/superlu/" "superlu-" version ".tar.gz")) (sha256 (base32 "0xvib7nk2rlbsiv1iwkwl9kxppkalkciv628bsyiiv0pv754n48q")) (modules '((guix build utils))) (snippet ;; Replace the non-free implementation of MC64 with a stub adapted ;; from Debian '(begin (use-modules (ice-9 regex) (ice-9 rdelim)) (call-with-output-file "SRC/mc64ad.c" (lambda (port) (display " #include #include void mc64id_(int *a) { fprintf (stderr, \"SuperLU: non-free MC64 not available. Aborting.\\n\"); abort (); } void mc64ad_ (int *a, int *b, int *c, int *d, int *e, double *f, int *g, int *h, int *i, int *j, int *k, double *l, int *m, int *n) { fprintf (stderr, \"SuperLU: non-free MC64 not available. Aborting.\\n\"); abort (); }\n" port))) ;; Remove the corresponding license verbiage. MC64 license follows ;; a "------" line separator. (with-atomic-file-replacement "License.txt" (let ((rx (make-regexp "-{8}"))) (lambda (in out) (let loop () (let ((line (read-line in 'concat))) (unless (regexp-exec rx line) (display line out) (loop)))) #t))))))) (build-system cmake-build-system) (native-inputs (list tcsh)) (inputs `(("blas" ,openblas) ("gfortran" ,gfortran))) (arguments `(#:configure-flags '("-Denable_blaslib:BOOL=NO" ;do not use internal cblas "-DTPL_BLAS_LIBRARIES=openblas" "-DBUILD_SHARED_LIBS:BOOL=YES"))) (home-page "https://portal.nersc.gov/project/sparse/superlu/") (synopsis "Supernodal direct solver for sparse linear systems") (description "SuperLU is a general purpose library for the direct solution of large, sparse, nonsymmetric systems of linear equations on high performance machines. The library is written in C and is callable from either C or Fortran. The library routines perform an LU decomposition with partial pivoting and triangular system solves through forward and back substitution. The library also provides threshold-based ILU factorization preconditioners.") (license (list license:bsd-3 license:gpl2+ ;EXAMPLE/*fgmr.c (license:fsf-free "file://SRC/colamd.h"))))) (define-public superlu-dist (package (name "superlu-dist") (version "6.4.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/xiaoyeli/superlu_dist") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0fa29yr72p4yq5ln4rgfsawmi5935n4qcr5niz6864bjladz4lql")) (modules '((guix build utils))) (snippet ;; Replace the non-free implementation of MC64 with a stub '(begin (make-file-writable "SRC/mc64ad_dist.c") (call-with-output-file "SRC/mc64ad_dist.c" (lambda (port) (display " #include #include void mc64id_dist(int *a) { fprintf (stderr, \"SuperLU_DIST: non-free MC64 not available. Aborting.\\n\"); abort (); } void mc64ad_dist (int *a, int *b, int *c, int *d, int *e, double *f, int *g, int *h, int *i, int *j, int *k, double *l, int *m, int *n) { fprintf (stderr, \"SuperLU_DIST: non-free MC64 not available. Aborting.\\n\"); abort (); }\n" port))) (substitute* "SRC/util.c" ;adjust default algorithm (("RowPerm[[:blank:]]*=[[:blank:]]*LargeDiag_MC64;") ;; TODO: set to "LargeDiag_AWPM" once combinatorial-blas has ;; general (i.e. non-square) processor-grid support. "RowPerm = NOROWPERM;")) #t)) (patches (search-patches "superlu-dist-scotchmetis.patch" "superlu-dist-awpm-grid.patch")))) (build-system cmake-build-system) (native-inputs (list tcsh)) (inputs `(("gfortran" ,gfortran) ("blas" ,openblas) ("lapack" ,lapack) ("combblas" ,combinatorial-blas))) (propagated-inputs `(("mpi" ,openmpi) ;headers include MPI heades ("parmetis" ,pt-scotch32 "metis") ("pt-scotch" ,pt-scotch32))) (arguments `(#:parallel-tests? #f ;tests use MPI and OpenMP #:configure-flags (list "-DBUILD_SHARED_LIBS:BOOL=YES" "-DTPL_ENABLE_COMBBLASLIB=YES" "-DTPL_BLAS_LIBRARIES=-lopenblas" "-DTPL_LAPACK_LIBRARIES=-llapack" (string-append "-DTPL_PARMETIS_LIBRARIES=" (string-join '("ptscotchparmetis" "ptscotch" "ptscotcherr" "scotchmetis" "scotch" "scotcherr") ";")) (string-append "-DTPL_PARMETIS_INCLUDE_DIRS=" (assoc-ref %build-inputs "parmetis") "/include") "-DTPL_ENABLE_COMBBLASLIB=ON" (string-append "-DTPL_COMBBLAS_INCLUDE_DIRS=" (assoc-ref %build-inputs "combblas") "/include/CombBLAS;" (assoc-ref %build-inputs "combblas") "/include/BipartiteMatchings") "-DTPL_COMBBLAS_LIBRARIES=CombBLAS") #:phases (modify-phases %standard-phases (add-before 'configure 'set-c++-standard (lambda _ (substitute* "CMakeLists.txt" ;; AWPM headers require C++14 (("CMAKE_CXX_STANDARD 11") "CMAKE_CXX_STANDARD 14")))) (add-before 'check 'mpi-setup ,%openmpi-setup) (add-before 'check 'omp-setup (lambda _ (setenv "OMP_NUM_THREADS" "1") #t))))) (home-page (package-home-page superlu)) (synopsis "Parallel supernodal direct solver") (description "SuperLU_DIST is a parallel extension to the serial SuperLU library. It is targeted for distributed memory parallel machines. SuperLU_DIST is implemented in ANSI C, and MPI for communications.") (license license:bsd-3))) (define-public scotch (package (name "scotch") (version "7.0.1") (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.inria.fr/scotch/scotch") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1fvgxd3ipl5xswswyadvxvlcgv6an8c229ispnlksgnlwphg10ig")))) (build-system cmake-build-system) (inputs (list zlib)) (native-inputs (list flex bison gfortran)) (outputs '("out" "metis")) (arguments `(#:configure-flags '("-DBUILD_SHARED_LIBS=YES" "-DINTSIZE=64" "-DBUILD_PTSCOTCH=OFF") #:phases (modify-phases %standard-phases (add-after 'install 'install-metis (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (metis (assoc-ref outputs "metis")) (prefix (string-length out))) (for-each (lambda (file) (let ((target (string-append metis (string-drop file prefix)))) (mkdir-p (dirname target)) (rename-file file target))) (find-files out "metis")))))))) (home-page "https://www.labri.fr/perso/pelegrin/scotch/") (properties `((release-monitoring-url . "https://gitlab.inria.fr/scotch/scotch/-/releases"))) (synopsis "Programs and libraries for graph algorithms") (description "SCOTCH is a set of programs and libraries which implement the static mapping and sparse matrix reordering algorithms developed within the SCOTCH project. Its purpose is to apply graph theory, with a divide and conquer approach, to scientific computing problems such as graph and mesh partitioning, static mapping, and sparse matrix ordering, in application domains ranging from structural mechanics to operating systems or bio-chemistry.") ;; See LICENSE_en.txt (license license:cecill-c))) (define-public scotch32 ;; This is the 'INTSIZE32' variant, which uses 32-bit integers, as needed by ;; some applications. (package (inherit scotch) (name "scotch32") (arguments (substitute-keyword-arguments (package-arguments scotch) ((#:configure-flags flags ''()) ''("-DBUILD_SHARED_LIBS=YES" "-DBUILD_PTSCOTCH=OFF" "-DINTSIZE=32")))) (synopsis "Programs and libraries for graph algorithms (32-bit integers)"))) (define-public pt-scotch (package (inherit scotch) (name "pt-scotch") (propagated-inputs (list openmpi)) ;headers include MPI headers (arguments (substitute-keyword-arguments (package-arguments scotch) ((#:configure-flags flags ''()) ''("-DBUILD_SHARED_LIBS=YES" "-DBUILD_PTSCOTCH=ON" "-DINTSIZE=64")) ((#:phases phases '%standard-phases) `(modify-phases ,phases (add-before 'check 'mpi-setup ,%openmpi-setup))))) (synopsis "Programs and libraries for graph algorithms (with MPI)"))) (define-public pt-scotch32 (package (inherit pt-scotch) (name "pt-scotch32") (propagated-inputs (list openmpi)) ;headers include MPI headers (arguments (substitute-keyword-arguments (package-arguments pt-scotch) ((#:configure-flags flags ''()) ''("-DBUILD_SHARED_LIBS=YES" "-DBUILD_PTSCOTCH=ON" "-DINTSIZE=32")))) (synopsis "Programs and libraries for graph algorithms (with MPI and 32-bit integers)"))) (define-public scotch-shared ;; There used to be separate shared library variants while the default would ;; provide .a files including PIC objects. With the switch to CMake, .a ;; files contain non-PIC objects, which breaks some users, and switching to ;; shared libraries by default seems to make more sense, as discussed here: ;; . (deprecated-package "scotch-shared" scotch)) (define-public pt-scotch-shared (deprecated-package "pt-scotch-shared" pt-scotch)) (define-public metis (package (name "metis") (version "5.1.0") (source (origin (method url-fetch) (uri (string-append "http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/" "metis-" version ".tar.gz")) (sha256 (base32 "1cjxgh41r8k6j029yxs8msp3z6lcnpm16g5pvckk35kc7zhfpykn")))) (properties `((release-monitoring-url . "http://glaros.dtc.umn.edu/gkhome/metis/metis/download"))) (build-system cmake-build-system) (inputs `(("blas" ,openblas))) (arguments `(#:tests? #f ;no tests #:configure-flags `("-DSHARED=ON" ,(string-append "-DGKLIB_PATH=" (getcwd) "/metis-" ,version "/GKlib")))) (home-page "http://glaros.dtc.umn.edu/gkhome/metis/metis/overview") (synopsis "Graph partitioning and fill-reducing matrix ordering library") (description "METIS is a set of serial programs for partitioning graphs, partitioning finite element meshes, and producing fill-reducing orderings for sparse matrices. The algorithms implemented in METIS are based on the multilevel recursive-bisection, multilevel k-way, and multi-constraint partitioning schemes.") (license license:asl2.0))) ;As of version 5.0.3 (define-public p4est (package (name "p4est") (version "2.0") (source (origin (method url-fetch) (uri (string-append "http://p4est.github.io/release/p4est-" version ".tar.gz")) (sha256 (base32 "16h267z256kxcxfjs390qqzv19hr58vrj4x8lndb7alnk2vca8n5")))) (build-system gnu-build-system) (inputs `(("fortran" ,gfortran) ("blas" ,openblas) ("lapack" ,lapack) ("zlib" ,zlib))) (arguments `(#:configure-flags `(,(string-append "BLAS_LIBS=-L" (assoc-ref %build-inputs "blas") " -lopenblas") ,(string-append "LAPACK_LIBS=-L" (assoc-ref %build-inputs "lapack") " -llapack")) #:phases (modify-phases %standard-phases (add-before 'check 'mpi-setup ,%openmpi-setup)))) (home-page "http://www.p4est.org") (synopsis "Adaptive mesh refinement on forests of octrees") (description "The p4est software library enables the dynamic management of a collection of adaptive octrees, conveniently called a forest of octrees. p4est is designed to work in parallel and scales to hundreds of thousands of processor cores.") (license license:gpl2+))) (define-public p4est-openmpi (package (inherit p4est) (name "p4est-openmpi") (inputs `(("mpi" ,openmpi) ,@(package-inputs p4est))) (arguments (substitute-keyword-arguments (package-arguments p4est) ((#:configure-flags cf) ``("--enable-mpi" ,@,cf)))) (synopsis "Parallel adaptive mesh refinement on forests of octrees"))) (define-public gsegrafix ;; This is an old and equally dead "experimental fork" of the longer-dead ;; original. At least it no longer requires the even-deader libgnomeprint{,ui} ;; libraries, instead rendering plots with Pango. (package (name "gsegrafix") (version "1.0.7.2") (source (origin (method url-fetch) (uri (string-append "mirror://savannah/gsegrafix-experimental/" "gsegrafix-experimental-" version ".tar.gz")) (sha256 (base32 "0fwh6719xy2zasmqlp0vdx6kzm45hn37ga88xmw5cz0yx7xw4j6f")))) (build-system gnu-build-system) (arguments `(#:configure-flags (list "--disable-static"))) (inputs (list glib gtk+)) (native-inputs (list pkg-config)) (home-page "https://www.gnu.org/software/gsegrafix/") (synopsis "GNOME application to create scientific and engineering plots") (description "GSEGrafix is an application which produces high-quality graphical plots for science and engineering. Plots are specified via simple ASCII parameter files and data files and are presented in an anti-aliased GNOME canvas. The program supports rectangular two-dimensional plots, histograms, polar-axis plots and three-dimensional plots. Plots can be printed or saved to BMP, JPEG or PNG image formats.") (license license:gpl3+))) (define-public maxima (package (name "maxima") (version "5.46.0") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/maxima/Maxima-source/" version "-source/" name "-" version ".tar.gz")) (sha256 (base32 "01wbm8jj43p7gpdj4h55aij0b44bjydn4bwb7q1wjrfs91mz143k")) (patches (search-patches "maxima-defsystem-mkdir.patch")))) (build-system gnu-build-system) (inputs `(("bash" ,bash-minimal) ("gnuplot" ,gnuplot) ;for plots ("sbcl" ,sbcl) ("sed" ,sed) ("tk" ,tk))) ;Tcl/Tk is used by 'xmaxima' (native-inputs (list texinfo perl python)) (arguments `(#:configure-flags ,#~(list "--enable-sbcl" (string-append "--with-sbcl=" #$sbcl "/bin/sbcl") (string-append "--with-posix-shell=" #$bash-minimal "/bin/sh") (string-append "--with-wish=" #$tk "/bin/wish" #$(version-major+minor (package-version tk)))) ;; By default Maxima attempts to write temporary files to ;; '/tmp/nix-build-maxima-*', which won't exist at run time. ;; Work around that. #:make-flags (list "TMPDIR=/tmp") #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-paths (lambda* (#:key inputs #:allow-other-keys) (let* ((sed (search-input-file inputs "/bin/sed")) (coreutils (assoc-ref inputs "coreutils")) (dirname (string-append coreutils "/bin/dirname")) (head (string-append coreutils "/bin/head")) (perl (search-input-file inputs "/bin/perl")) (python (search-input-file inputs "/bin/python3"))) (substitute* "src/maxima.in" (("sed ") (string-append sed " ")) (("dirname") dirname) (("head") head)) (substitute* "doc/info/Makefile.in" (("/usr/bin/env perl") perl)) (substitute* "doc/info/build_html.sh.in" (("python") python)) #t))) (add-before 'check 'pre-check (lambda _ (chmod "src/maxima" #o555) #t)) (replace 'check (lambda _ ;; This is derived from the testing code in the "debian/rules" file ;; of Debian's Maxima package. ;; If Maxima can successfully run this, the binary to be installed ;; should be fine. (invoke "sh" "-c" (string-append "./maxima-local " "--lisp=sbcl " "--batch-string=\"run_testsuite();\" " "| grep -q \"No unexpected errors found\"")))) ;; Make sure the doc and emacs files are found in the ;; standard location. Also configure maxima to find gnuplot ;; without having it on the PATH. (add-after 'install 'post-install (lambda* (#:key outputs inputs #:allow-other-keys) (let* ((gnuplot (assoc-ref inputs "gnuplot")) (out (assoc-ref outputs "out")) (datadir (string-append out "/share/maxima/" ,version)) (binutils (dirname (search-input-file inputs "/bin/as")))) (with-directory-excursion out (mkdir-p "share/emacs") (mkdir-p "share/doc") (symlink (string-append datadir "/doc/") (string-append out "/share/doc/maxima")) (with-atomic-file-replacement (string-append datadir "/share/maxima-init.lisp") (lambda (in out) (format out "~a ~s~a~%" "(setf $gnuplot_command " (string-append gnuplot "/bin/gnuplot") ")") (dump-port in out)))) ;; Ensure that Maxima will have access to the GNU binutils ;; components at runtime. (wrap-program (string-append out "/bin/maxima") `("PATH" prefix (,binutils)))) #t))))) (home-page "https://maxima.sourceforge.io") (synopsis "Numeric and symbolic expression manipulation") (description "Maxima is a system for the manipulation of symbolic and numerical expressions. It yields high precision numeric results by using exact fractions, arbitrary precision integers, and variable precision floating point numbers.") ;; Some files are lgpl2.1+. Some are gpl2+. Some explicitly state gpl1+. ;; Others simply say "GNU General Public License" without stating a ;; version (which implicitly means gpl1+). ;; At least one file (src/maxima.asd) says "version 2." ;; GPLv2 only is therefore the smallest subset. (license license:gpl2))) (define-public wxmaxima (package (name "wxmaxima") (version "22.05.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/wxMaxima-developers/wxmaxima") (commit (string-append "Version-" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1va56v9dys97yln4m1z3fz3k90lpy8i3kvcq0v1cbg36689aghm5")))) (build-system cmake-build-system) (native-inputs `(("gettext" ,gettext-minimal))) (inputs (list wxwidgets maxima ;; Runtime support. adwaita-icon-theme gtk+ shared-mime-info)) (arguments `(#:tests? #f ; tests fail non-deterministically #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-doc-path (lambda _ ;; Don't look in share/doc/wxmaxima-xx.xx.x for the ;; documentation. Only licensing information is placed there by ;; Guix. (substitute* "src/Dirstructure.cpp" (("/doc/wxmaxima-\\%s") "/doc/wxmaxima")) #t)) (add-after 'install 'wrap-program (lambda* (#:key inputs outputs #:allow-other-keys) (wrap-program (string-append (assoc-ref outputs "out") "/bin/wxmaxima") `("PATH" ":" prefix (,(string-append (assoc-ref inputs "maxima") "/bin"))) ;; For GtkFileChooserDialog. `("GSETTINGS_SCHEMA_DIR" = (,(string-append (assoc-ref inputs "gtk+") "/share/glib-2.0/schemas"))) `("XDG_DATA_DIRS" ":" prefix (;; Needed by gdk-pixbuf to know supported icon formats. ,(string-append (assoc-ref inputs "shared-mime-info") "/share") ;; The default icon theme of GTK+. ,(string-append (assoc-ref inputs "adwaita-icon-theme") "/share")))) #t))))) (home-page "https://wxmaxima-developers.github.io/wxmaxima/") (synopsis "Graphical user interface for the Maxima computer algebra system") (description "wxMaxima is a graphical user interface for the Maxima computer algebra system. It eases the use of Maxima by making most of its commands available through a menu system and by providing input dialogs for commands that require more than one argument. It also implements its own display engine that outputs mathematical symbols directly instead of depicting them with ASCII characters. wxMaxima also features 2D and 3D inline plots, simple animations, mixing of text and mathematical calculations to create documents, exporting of input and output to TeX, and a browser for Maxima's manual including command index and full text searching.") (license license:gpl2+))) (define-public armadillo (package (name "armadillo") (version "9.100.5") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/arma/armadillo-" version ".tar.xz")) (sha256 (base32 "1ka1vd9fcmvp12qkcm4888dkfqwnalvv00x04wy29f3nx3qwczby")))) (build-system cmake-build-system) (arguments `(#:tests? #f)) ; no test target (inputs `(("openblas" ,openblas) ("lapack" ,lapack) ("arpack" ,arpack-ng))) (home-page "http://arma.sourceforge.net/") (synopsis "C++ linear algebra library") (description "Armadillo is a C++ linear algebra library, aiming towards a good balance between speed and ease of use. It is useful for algorithm development directly in C++, or quick conversion of research code into production environments. It can be used for machine learning, pattern recognition, signal processing, bioinformatics, statistics, econometrics, etc. The library provides efficient classes for vectors, matrices and cubes, as well as 150+ associated functions (e.g., contiguous and non-contiguous submatrix views).") (license license:asl2.0))) (define-public muparser ;; When switching download sites, muparser re-issued a 2.2.5 release with a ;; different hash. In order to make `guix package --upgrade` work correctly, ;; we set a Guix packaging revision. ;; When the next version of muparser is released, we can remove ;; UPSTREAM-VERSION and REVISION and use the plain VERSION. (let ((upstream-version "2.2.5") (revision "2")) (package (name "muparser") (version (string-append upstream-version "-" revision)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/beltoforion/muparser") (commit (string-append "v" upstream-version)))) (file-name (git-file-name name version)) (sha256 (base32 "0f0g4995xngf1pp3zr4p6ai2f8v6f8bxwa0k8ayjjiv1l8h44m24")))) (build-system gnu-build-system) (arguments `(#:configure-flags '("--enable-samples=no") #:tests? #f)) ;no "check" target (home-page "http://muparser.beltoforion.de/") (synopsis "Fast parser library for mathematical expressions") (description "muParser is an extensible high performance math parser library. It is based on transforming an expression into a bytecode and precalculating constant parts of it.") (license license:expat)))) (define-public openblas (package (name "openblas") (version "0.3.20") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/xianyi/OpenBLAS") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0r4sz3rn68fyc2paq0a04pgfi7iszpm95f6ggbzxpvjzx9qxbcql")))) (build-system gnu-build-system) (arguments `(#:test-target "test" ;; DYNAMIC_ARCH is only supported on x86. When it is disabled and no ;; TARGET is specified, OpenBLAS will tune itself to the build host, so ;; we need to disable substitutions. #:substitutable? ,(let ((system (or (%current-target-system) (%current-system)))) (or (string-prefix? "x86_64" system) (string-prefix? "i686" system) (string-prefix? "mips" system) (string-prefix? "aarch64" system))) #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out")) "SHELL=bash" "MAKE_NB_JOBS=0" ;use jobserver for submakes "NO_STATIC=1" ;avoid a 67 MiB static archive ;; This is the maximum number of threads OpenBLAS will ever use (that ;; is, if $OPENBLAS_NUM_THREADS is greater than that, then NUM_THREADS ;; is used.) If we don't set it, the makefile sets it to the number ;; of cores of the build machine, which is obviously wrong. "NUM_THREADS=128" ;; Build the library for all supported CPUs. This allows ;; switching CPU targets at runtime with the environment variable ;; OPENBLAS_CORETYPE=, where "type" is a supported CPU type. ;; Unfortunately, this is not supported on all architectures, ;; where it leads to failed builds. ,@(let ((system (or (%current-target-system) (%current-system)))) (cond ((or (string-prefix? "x86_64" system) (string-prefix? "i686" system) (string-prefix? "powerpc64le" system) (string-prefix? "aarch64" system)) ;; Dynamic older enables a few extra CPU architectures that ;; were released before 2010. '("DYNAMIC_ARCH=1" "DYNAMIC_OLDER=1" "TARGET=GENERIC")) ;; On some of these architectures the CPU can't be detected. ;; On MIPS we force the "SICORTEX" TARGET, as for the other ;; two available MIPS targets special extended instructions ;; for Loongson cores are used. ((string-prefix? "mips" system) '("TARGET=SICORTEX")) ;; Failed to detect CPU. ((string-prefix? "armhf" system) '("TARGET=ARMV7")) ((string-prefix? "riscv64" system) '("TARGET=RISCV64_GENERIC")) (else '())))) ;; no configure script #:phases (modify-phases %standard-phases (delete 'configure) (add-before 'build 'set-extralib (lambda* (#:key inputs #:allow-other-keys) ;; Get libgfortran found when building in utest. (setenv "FEXTRALIB" (string-append "-L" (dirname (search-input-file inputs "/lib/libgfortran.so"))))))))) (inputs (list `(,gfortran "lib"))) (native-inputs (list cunit gfortran perl)) (home-page "https://www.openblas.net/") (synopsis "Optimized BLAS library based on GotoBLAS") (description "OpenBLAS is a BLAS library forked from the GotoBLAS2-1.13 BSD version.") (license license:bsd-3))) (define-public openblas-ilp64 (package/inherit openblas (name "openblas-ilp64") (supported-systems '("x86_64-linux" "aarch64-linux" "mips64el-linux")) (arguments (substitute-keyword-arguments (package-arguments openblas) ((#:make-flags flags '()) `(append (list "INTERFACE64=1" "LIBNAMESUFFIX=ilp64") ,flags)))) (synopsis "Optimized BLAS library based on GotoBLAS (ILP64 version)") (license license:bsd-3))) (define-public blis (package (name "blis") (version "0.8.1") (home-page "https://github.com/flame/blis") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit version))) (sha256 (base32 "05ifil6jj9424sr8kmircl8k4bmxnl3y12a79vwj1kxxva5gz50g")) (file-name (git-file-name "blis" version)))) (native-inputs (list python perl)) (build-system gnu-build-system) (arguments `(#:modules ((guix build gnu-build-system) (guix build utils) (srfi srfi-1)) #:test-target "test" #:phases (modify-phases %standard-phases (replace 'configure (lambda* (#:key outputs target system (configure-flags '()) #:allow-other-keys) ;; This is a home-made 'configure' script. (let* ((out (assoc-ref outputs "out")) ;; Guix-specific support for choosing the configuration ;; via #:configure-flags: see below for details. (config-flag-prefix "--blis-config=") (maybe-config-flag (find (lambda (s) (string-prefix? config-flag-prefix s)) configure-flags)) (configure-flags (if maybe-config-flag (delete maybe-config-flag configure-flags) configure-flags)) ;; Select the "configuration" to build. ;; The "generic" configuration is non-optimized but ;; portable (no assembly). ;; The "x86_64" configuration family includes ;; sub-configurations for all supported ;; x86_64 microarchitectures. ;; BLIS currently lacks runtime hardware detection ;; for other architectures: see ;; . ;; Conservatively, we stick to "generic" on armhf, ;; aarch64, and ppc64le for now. (But perhaps ;; "power9", "cortexa9", and "cortexa57" might be ;; general enough to use?) ;; Another approach would be to use the "auto" ;; configuration and make this package ;; non-substitutable. ;; The build is fairly intensive, though. (blis-config (cond (maybe-config-flag (substring maybe-config-flag (string-length config-flag-prefix))) ((string-prefix? "x86_64" (or target system)) "x86_64") (else "generic"))) (configure-args `("-p" ,out "-d" "opt" "--disable-static" "--enable-shared" "--enable-threading=openmp" "--enable-verbose-make" ,@configure-flags ,blis-config))) (format #t "configure args: ~s~%" configure-args) (apply invoke "./configure" configure-args) #t))) (add-before 'check 'show-test-output (lambda _ ;; By default "make check" is silent. Make it verbose. (system "tail -F output.testsuite &") #t))))) (synopsis "High-performance basic linear algebra (BLAS) routines") (description "BLIS is a portable software framework for instantiating high-performance BLAS-like dense linear algebra libraries. The framework was designed to isolate essential kernels of computation that, when optimized, immediately enable optimized implementations of most of its commonly used and computationally intensive operations. While BLIS exports a new BLAS-like API, it also includes a BLAS compatibility layer which gives application developers access to BLIS implementations via traditional BLAS routine calls.") (license license:bsd-3))) (define-public blis-sandybridge (deprecated-package "blis-sandybridge" blis)) (define-public blis-haswell (deprecated-package "blis-haswell" blis)) (define-public blis-knl (deprecated-package "blis-knl" blis)) (define ignorance blis) (define-public openlibm (package (name "openlibm") (version "0.7.4") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/JuliaLang/openlibm") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1azms0lpxb7vxb3bln5lyz0wpwx6jnzbffkclclpq2v5aiw8d14i")))) (build-system gnu-build-system) (arguments `(#:make-flags (list (string-append "prefix=" (assoc-ref %outputs "out")) ,(string-append "CC=" (cc-for-target))) #:phases ;; no configure script (modify-phases %standard-phases (delete 'configure)) #:tests? #f)) ;the tests are part of the default target (home-page "https://openlibm.org/") (synopsis "Portable C mathematical library (libm)") (description "OpenLibm is an effort to have a high quality, portable, standalone C mathematical library (libm). It can be used standalone in applications and programming language implementations. The project was born out of a need to have a good libm for the Julia programming language that worked consistently across compilers and operating systems, and in 32-bit and 64-bit environments.") ;; Each architecture has its own make target, and there is none for mips. (supported-systems (delete "mips64el-linux" %supported-systems)) ;; See LICENSE.md for details. (license (list license:expat license:isc license:bsd-2 license:public-domain license:lgpl2.1+)))) (define-public openspecfun (package (name "openspecfun") (version "0.5.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/JuliaLang/openspecfun") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0pfw6l3ch7isz403llx7inxlvavqh01jh1hb9dpidi86sjjx9kfh")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; no "check" target #:make-flags (list (string-append "prefix=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure)))) ; no configure script (inputs `(("fortran" ,gfortran))) (home-page "https://github.com/JuliaLang/openspecfun") (synopsis "Collection of special mathematical functions") (description "Openspecfun provides AMOS and Faddeeva. AMOS (from Netlib) is a portable package for Bessel Functions of a Complex Argument and Nonnegative Order; it contains subroutines for computing Bessel functions and Airy functions. Faddeeva allows computing the various error functions of arbitrary complex arguments (Faddeeva function, error function, complementary error function, scaled complementary error function, imaginary error function, and Dawson function); given these, one can also easily compute Voigt functions, Fresnel integrals, and similar related functions as well.") ;; Faddeeva is released under the Expat license; AMOS is included as ;; public domain software. (license (list license:expat license:public-domain)))) (define-public suitesparse (package (name "suitesparse") (version "5.10.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/DrTimothyAldenDavis/SuiteSparse") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "19gx5wlgqnqpgz6mvam9lalyzpbfwgqhppps8z3np9sh0mgaiyw9")) (patches (search-patches "suitesparse-mongoose-cmake.patch")) (modules '((guix build utils))) (snippet ;; Remove bundled metis source '(begin (delete-file-recursively "metis-5.1.0") #t)))) (build-system gnu-build-system) (arguments `(#:tests? #f ;no "check" target #:make-flags (list (string-append "CC=" ,(cc-for-target)) "TBB=-ltbb" "MY_METIS_LIB=-lmetis" ;; The default is to link against netlib lapack. Use OpenBLAS ;; instead. "BLAS=-lopenblas" "LAPACK=-lopenblas" ;; Flags for cmake (required to build GraphBLAS and Mongoose) (string-append "CMAKE_OPTIONS=-DCMAKE_INSTALL_PREFIX=" (assoc-ref %outputs "out") " -DCMAKE_VERBOSE_MAKEFILE=ON" " -DCMAKE_C_FLAGS_RELEASE=\"$(CFLAGS) $(CPPFLAGS)\"" " -DCMAKE_CXX_FLAGS_RELEASE=\"$(CXXFLAGS) $(CPPFLAGS)\"" " -DCMAKE_SKIP_RPATH=TRUE" " -DCMAKE_BUILD_TYPE=Release" " -DCMAKE_INSTALL_LIBDIR=lib") (string-append "INSTALL_LIB=" (assoc-ref %outputs "out") "/lib") (string-append "INSTALL_INCLUDE=" (assoc-ref %outputs "out") "/include") "library") #:phases (modify-phases %standard-phases (delete 'configure)))) ;no configure script (inputs (list tbb openblas gmp mpfr metis)) (native-inputs `(("cmake" ,cmake-minimal) ("m4" ,m4))) (home-page "http://faculty.cse.tamu.edu/davis/suitesparse.html") (synopsis "Suite of sparse matrix software") (description "SuiteSparse is a suite of sparse matrix algorithms, including: UMFPACK, multifrontal LU factorization; CHOLMOD, supernodal Cholesky; SPQR, multifrontal QR; KLU and BTF, sparse LU factorization, well-suited for circuit simulation; ordering methods (AMD, CAMD, COLAMD, and CCOLAMD); CSparse and CXSparse, a concise sparse Cholesky factorization package; and many other packages.") ;; LGPLv2.1+: ;; AMD, CAMD, BTF, COLAMD, CCOLAMD, CSparse, CXSparse, KLU, LDL ;; GPLv2+: ;; GPUQREngine, RBio, SuiteSparse_GPURuntime, SuiteSparseQR, UMFPACK (license (list license:gpl2+ license:lgpl2.1+)))) (define-public atlas (package (name "atlas") (version "3.10.3") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/math-atlas/Stable/" version "/atlas" version ".tar.bz2")) (patches (search-patches "atlas-gfortran-compat.patch")) (sha256 (base32 "1dyjlq3fiparvm8ypwk6rsmjzmnwk81l88gkishphpvc79ryp216")))) (build-system gnu-build-system) (home-page "http://math-atlas.sourceforge.net/") (inputs `(("gfortran" ,gfortran) ("lapack-tar" ,(package-source lapack)))) (outputs '("out" "doc")) ;; For the moment we drop support for MIPS at it fails to compile. See ;; https://lists.gnu.org/archive/html/guix-devel/2014-11/msg00516.html (supported-systems (delete "mips64el-linux" %supported-systems)) (arguments `(#:parallel-build? #f #:parallel-tests? #f ;; ATLAS tunes itself for the machine it is built on, as explained at ;; . ;; For this reason, we want users to build it locally instead of using ;; substitutes. #:substitutable? #f #:modules ((srfi srfi-26) (guix build gnu-build-system) (guix build utils)) #:configure-flags `(;; Generate position independent code suitable for dynamic libraries ;; and use WALL timer to get more accurate timing. "-Fa" "alg" "-fPIC" "-D" "c" "-DWALL" ;; Set word width. "-b" ,,(if (string-match "64" (%current-system)) "64" "32") ;; Disable parallel build as it gives errors: atlas_pthread.h is ;; needed to compile C files before it is generated. "-Ss" "pmake" "make -j 1" ;; Probe is failing for MIPS. We therefore define the system ;; architecture explicitly by setting (-A) MACHINETYPE = 49 ;; 'MIPSR1xK' and (-V) ISA = 1 'none'. ,,@(if (string-prefix? "mips" (%current-system)) (list "-A" "49" "-V" "1") (list)) ;; Generate shared libraries. "--shared" ;; Build a full LAPACK library. ,(string-append "--with-netlib-lapack-tarfile=" (assoc-ref %build-inputs "lapack-tar"))) #:phases (modify-phases %standard-phases (add-after 'install 'install-doc (lambda* (#:key outputs inputs #:allow-other-keys) (let ((doc (string-append (assoc-ref outputs "doc") "/share/doc/atlas"))) (mkdir-p doc) (for-each (cut install-file <> doc) (find-files "../ATLAS/doc" ".*")) #t))) (add-after 'check 'check-pt (lambda _ (invoke "make" "ptcheck"))) ;; Fix files required to run configure. (add-before 'configure 'fix-/bin/sh (lambda _ ;; Use `sh', not `/bin/sh'. (substitute* (find-files "." "Makefile|configure|SpewMakeInc\\.c") (("/bin/sh") "sh")) #t)) ;; Fix /bin/sh in generated make files. (add-after 'configure 'fix-/bin/sh-in-generated-files (lambda _ (substitute* (find-files "." "^[Mm]ake\\.inc.*") (("/bin/sh") "sh")) #t)) ;; ATLAS configure program does not accepts the default flags ;; passed by the 'gnu-build-system'. (replace 'configure (lambda* (#:key native-inputs inputs outputs (configure-flags '()) #:allow-other-keys #:rest args) (let* ((prefix (assoc-ref outputs "out")) (bash (or (and=> (assoc-ref (or native-inputs inputs) "bash") (cut string-append <> "/bin/bash")) "/bin/sh")) (flags `(,(string-append "--prefix=" prefix) ,@configure-flags)) (abs-srcdir (getcwd)) (srcdir (string-append "../" (basename abs-srcdir)))) (format #t "source directory: ~s (relative from build: ~s)~%" abs-srcdir srcdir) (mkdir "../build") (chdir "../build") (format #t "build directory: ~s~%" (getcwd)) (format #t "configure flags: ~s~%" flags) (apply invoke bash (string-append srcdir "/configure") flags))))))) (synopsis "Automatically Tuned Linear Algebra Software") (description "ATLAS is an automatically tuned linear algebra software library providing C and Fortran77 interfaces to a portably efficient BLAS implementation, as well as a few routines from LAPACK. Optimization occurs at build time. For this reason, the library is built on the machine where it is installed, without resorting to pre-built substitutes. Before building the library, CPU throttling should be disabled. This can be done in the BIOS, or, on GNU/Linux, with the following command: @example # cpupower --governor performance @end example Failure to do so will result in a library with poor performance.") ;; The test suite is notoriously lengthy and routinely exceeds the default ;; timeout of 21600 seconds on the not unbeefy berlin build nodes. (properties '((timeout . 86400))) ; 1 day (license license:bsd-3))) (define-public cglm (package (name "cglm") (version "0.8.4") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/recp/cglm") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0zgckh56vcdar3a4n51r84wrizyd2ssqal4nsvxd4qdjm0rvb4h0")))) (build-system meson-build-system) (arguments `(#:configure-flags '("-Dbuild_tests=true"))) (home-page "https://github.com/recp/cglm") (synopsis "Mathematics C library for graphics programming") (description "@acronym{CGLM, C OpenGL Mathematics} is an optimised 3D maths library for graphics software based on the @acronym{GLSL, OpenGL Shading Language} specifications. It's similar to the original C++ GLM library but written in C99 and compatible with C89.") (license license:expat))) (define-public glm (package (name "glm") (version "0.9.9.8") (source (origin (method url-fetch) (uri (string-append "https://github.com/g-truc/glm/releases/download/" version "/glm-" version ".zip")) (sha256 (base32 "0k6yk9v46h690rshdx49x98y5qspkzibld1wb51jwcm35vba7qip")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (replace 'install (lambda* (#:key outputs #:allow-other-keys) ;; Since version 0.9.9.6, 'make install' is not supported ;; and we have to do it "manually". Upstream discussion: ;; . (let* ((source (string-append "../glm")) (out (assoc-ref outputs "out")) (inc (string-append out "/include")) (lib (string-append out "/lib")) (pkgconfig (string-append lib "/pkgconfig"))) (with-directory-excursion source (mkdir-p inc) (mkdir-p pkgconfig) (copy-recursively "glm" (string-append inc "/glm")) (copy-recursively "cmake" (string-append lib "/cmake")) (call-with-output-file (string-append pkgconfig "/glm.pc") (lambda (port) (format port "prefix=~a includedir=${prefix}/include Name: GLM Description: OpenGL Mathematics Version: ~a Cflags: -I${includedir}~%" out ,(version-prefix version 3))))) #t)))))) (native-inputs (list unzip)) (home-page "https://glm.g-truc.net/") (synopsis "OpenGL Mathematics library") (description "OpenGL Mathematics (GLM) is a header-only C++ mathematics library for graphics software based on the OpenGL Shading Language (GLSL) specifications.") (license license:expat))) (define-public lpsolve (package (name "lpsolve") (version "5.5.2.5") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/lpsolve/lpsolve/" version "/lp_solve_" version "_source.tar.gz")) (sha256 (base32 "12pj1idjz31r7c2mb5w03vy1cmvycvbkx9z29s40qdmkp1i7q6i0")) (modules '((guix build utils))) (snippet '(begin (substitute* (list "lp_solve/ccc" "lpsolve55/ccc") (("^c=cc") "c=gcc") ;; Pretend to be on a 64 bit platform to obtain a common directory ;; name for the build results on all architectures; nothing else ;; seems to depend on it. (("^PLATFORM=.*$") "PLATFORM=ux64\n") ;; The check for 'isnan' as it is written fails with ;; "non-floating-point argument in call to function ;; ‘__builtin_isnan’", which leads to the 'NOISNAN' cpp macro ;; definition, which in turn leads to bad things. Fix the feature ;; test. (("isnan\\(0\\)") "isnan(0.)")) #t)))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no check target #:phases (modify-phases %standard-phases (delete 'configure) ; no configure script (replace 'build (lambda _ (with-directory-excursion "lpsolve55" (invoke "bash" "ccc")) (with-directory-excursion "lp_solve" (invoke "bash" "ccc")) #t)) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (lib (string-append out "/lib")) ;; This is where LibreOffice expects to find the header ;; files, and where they are installed by Debian. (include (string-append out "/include/lpsolve"))) (install-file "lpsolve55/bin/ux64/liblpsolve55.a" lib) (install-file "lpsolve55/bin/ux64/liblpsolve55.so" lib) (install-file "lp_solve/bin/ux64/lp_solve" bin) ;; Install a subset of the header files as on Debian ;; (plus lp_bit.h, which matches the regular expression). (for-each (lambda (name) (install-file name include)) (find-files "." "lp_[HMSa-z].*\\.h$")) (with-directory-excursion "shared" (for-each (lambda (name) (install-file name include)) (find-files "." "\\.h$"))) #t)))))) (home-page "http://lpsolve.sourceforge.net/") (synopsis "Mixed integer linear programming (MILP) solver") (description "lp_solve is a mixed integer linear programming solver based on the revised simplex and the branch-and-bound methods.") (license license:lgpl2.1+))) ;; Private Trilinos package for dealii-openmpi (similar to ;; trilinos-serial-xyce and trilinos-parallel-xyce). ;; This version is the latest known to be compatible with deal.II [1]. ;; Since the latest version of Trilinos is not necessarily supported by ;; deal.II, it may be worth keeping this package even if and when Trilinos ;; gets packaged separately for Guix (unless various versions of Trilinos are ;; packaged). ;; ;; An insightful source of information for building Trilinos for deal.II lies ;; in the Trilinos package for candi [2], which is a source-based installer ;; for deal.II and its dependencies. ;; ;; [1]: https://www.dealii.org/current/external-libs/trilinos.html ;; [2]: https://github.com/dealii/candi/blob/master/deal.II-toolchain/packages/trilinos.package (define trilinos-for-dealii-openmpi (package (name "trilinos-for-dealii-openmpi") (version "12.18.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/trilinos/Trilinos/") (commit (string-append "trilinos-release-" (string-replace-substring version "." "-"))))) (file-name (git-file-name "trilinos" version)) (sha256 (base32 "0fnwlhzsh85qj38cq3igbs8nm1b2jdgr2z734sapmyyzsy21mkgp")))) (build-system cmake-build-system) (native-inputs (list ;; The build fails with the current gcc. ;; Use the version from when Trilinos was added. gcc-7 gfortran ;; Trilinos's repository contains several C-shell scripts, but adding ;; tcsh to the native inputs does not result in the check phase running ;; any more tests than without it (nor is tcsh required to build ;; Trilinos). ;; It seems that Trilinos has replaced its use of C-shell test scripts ;; with CMake's testing facilities. ;; For example, ;; packages/zoltan/doc/Zoltan_html/dev_html/dev_test_script.html [1] ;; states that Zoltan's C-shell test script ;; packages/zoltan/test/test_zoltan has been obsoleted by the tests now ;; performed through CMake. ;; ;; Perl is required for some Zoltan tests and Python 2 for one ML test. ;; ;; [1]: https://cs.sandia.gov/zoltan/dev_html/dev_test_script.html perl python-2)) (inputs (list openblas lapack mumps-openmpi scalapack)) (propagated-inputs (list openmpi)) (arguments (list #:build-type "Release" #:configure-flags #~(list "-DBUILD_SHARED_LIBS=ON" ;; Obtain the equivalent of RelWithDebInfo but with -O3 ;; (the Release default) rather than -O2 (the ;; RelWithDebInfo default), to conform to candi's ;; trilinos.package's compilation flags, which are -g -O3. "-DCMAKE_C_FLAGS=-g" "-DCMAKE_CXX_FLAGS=-g" "-DCMAKE_Fortran_FLAGS=-g" ;; Trilinos libraries that deal.II can interface with. "-DTrilinos_ENABLE_Amesos=ON" "-DTrilinos_ENABLE_AztecOO=ON" "-DTrilinos_ENABLE_Epetra=ON" "-DTrilinos_ENABLE_EpetraExt=ON" "-DTrilinos_ENABLE_Ifpack=ON" "-DTrilinos_ENABLE_ML=ON" "-DTrilinos_ENABLE_MueLu=ON" "-DTrilinos_ENABLE_ROL=ON" ;; Optional; required for deal.II's GridIn::read_exodusii, ;; but depends on netcdf. ;; Enable if and when someone needs it. ;;"-DTrilinos_ENABLE_SEACAS=ON" "-DTrilinos_ENABLE_Sacado=ON" "-DTrilinos_ENABLE_Teuchos=ON" "-DTrilinos_ENABLE_Tpetra=ON" "-DTrilinos_ENABLE_Zoltan=ON" ;; Third-party libraries (TPLs) that Trilinos can interface ;; with. "-DBLAS_LIBRARY_NAMES=openblas" "-DTPL_ENABLE_MPI=ON" "-DTPL_ENABLE_MUMPS=ON" "-DTPL_ENABLE_SCALAPACK=ON" ;; Enable the tests but not the examples (which are enabled ;; by default when enabling tests). ;; Although some examples are run as tests, they are ;; otherwise unnecessary since this is a private package ;; meant for dealii-openmpi. ;; Besides, some MueLu and ROL examples require a lot of ;; memory to compile. ;; ;; (For future reference, note that some ROL and SEACAS ;; examples require removing gfortran from ;; CPLUS_INCLUDE_PATH as in the dune-istl, ;; dune-localfunctions and dune-alugrid packages.) "-DTrilinos_ENABLE_TESTS=ON" "-DTrilinos_ENABLE_EXAMPLES=OFF" ;; MueLu tests require considerably more time and memory to ;; compile than the rest of the tests. "-DMueLu_ENABLE_TESTS=OFF" ;; The following options were gleaned from candi's ;; trilinos.package. ;; (We do not enable the complex instantiations, which are ;; anyway provided only as an option in trilinos.package, ;; because they are costly in compilation time and memory ;; usage, and disk space [1].) ;; ;; [1]: https://www.docs.trilinos.org/files/TrilinosBuildReference.html#enabling-float-and-complex-scalar-types "-DTrilinos_ENABLE_Ifpack2=OFF" "-DTeuchos_ENABLE_FLOAT=ON" "-DTpetra_INST_INT_LONG=ON" "-DTPL_ENABLE_Boost=OFF") #:phases #~(modify-phases %standard-phases (add-after 'configure 'fix-kokkos-config (lambda _ ;; GNU Make 4.3 accidentally leaves the backslash preceding ;; the number sign in strings containing a literal ;; backslash–number sign (\#) [1, 2]. ;; This is still an issue in Trilinos 13.0.1, but should be ;; fixed in the following version. ;; (The latest versions of Kokkos incorporate the fix [2].) ;; ;; [1]: https://github.com/GEOSX/thirdPartyLibs/issues/136 ;; [2]: https://github.com/kokkos/kokkos/blob/3.4.00/Makefile.kokkos#L441 (substitute* "KokkosCore_config.h" (("\\\\#") "#")))) (add-before 'check 'mpi-setup #$%openmpi-setup)))) (home-page "https://trilinos.github.io/") (synopsis "Algorithms for engineering and scientific problems") (description "The Trilinos Project is an effort to develop algorithms and enabling technologies within an object-oriented software framework for the solution of large-scale, complex multi-physics engineering and scientific problems. A unique design feature of Trilinos is its focus on packages.") ;; The packages are variously licensed under more than just BSD-3 and ;; LGPL-2.1+, but all the licenses are either BSD- or LGPL-compatible. ;; See https://trilinos.github.io/license.html. (license (list license:bsd-3 license:lgpl2.1+)))) (define-public dealii (package (name "dealii") (version "9.4.0") (source (origin (method url-fetch) (uri (string-append "https://github.com/dealii/dealii/releases/" "download/v" version "/dealii-" version ".tar.gz")) (sha256 (base32 "0v73q6f35f2yrjihaq6vh9lma07qc4cdv75nwmc3c5yrdh07g1i3")) (modules '((guix build utils))) (snippet ;; Remove bundled boost, muparser, TBB and UMFPACK. #~(delete-file-recursively "bundled")))) (build-system cmake-build-system) (outputs '("out" "doc")) (native-inputs ;; Required to build the documentation. (list graphviz doxygen perl)) (inputs (list arpack-ng openblas gfortran lapack muparser zlib)) (propagated-inputs ;; Some scripts are installed into share/deal.II/scripts that require ;; perl and python, but they are not executable (and some are missing the ;; shebang line) and therefore must be explicitly passed to the ;; interpreter. ;; Anyway, they are meant to be used at build time, so rather than adding ;; the interpreters here, any package depending on them should just add ;; the requisite interpreter to its native inputs. (list boost hdf5 suitesparse ; For UMFPACK. sundials tbb)) (arguments (list #:build-type "DebugRelease" ; Only Debug, Release or DebugRelease. ;; The tests take too long and must be explicitly enabled with ;; "make setup_tests". ;; See https://www.dealii.org/developer/developers/testsuite.html. ;; (They can also be run for an already installed deal.II.) #:tests? #f #:configure-flags #~(let ((doc (string-append #$output:doc "/share/doc/" #$name "-" #$version))) (list "-DDEAL_II_COMPONENT_DOCUMENTATION=ON" (string-append "-DDEAL_II_DOCREADME_RELDIR=" doc) (string-append "-DDEAL_II_DOCHTML_RELDIR=" doc "/html") ;; Don't compile the examples because the source and ;; CMakeLists.txt are installed anyway, allowing users to ;; do so for themselves. "-DDEAL_II_COMPILE_EXAMPLES=OFF" (string-append "-DDEAL_II_EXAMPLES_RELDIR=" doc "/examples"))) #:phases #~(modify-phases %standard-phases (add-after 'install 'remove-build-logs ;; These build logs leak the name of the build directory by ;; storing the values of CMAKE_SOURCE_DIR and ;; CMAKE_BINARY_DIR. (lambda _ (let ((doc (string-append #$output:doc "/share/doc/" #$name "-" #$version))) (for-each delete-file (map (lambda (f) (string-append doc "/" f)) '("detailed.log" "summary.log"))))))))) (home-page "https://www.dealii.org/") (synopsis "Finite element library") (description "Deal.II is a C++ program library targeted at the computational solution of partial differential equations using adaptive finite elements. The main aim of deal.II is to enable rapid development of modern finite element codes, using among other aspects adaptive meshes and a wide array of tools often used in finite element programs.") (license license:lgpl2.1+))) (define-public dealii-openmpi (package/inherit dealii (name "dealii-openmpi") (inputs (modify-inputs (package-inputs dealii) (delete "arpack") (prepend arpack-ng-openmpi metis scalapack))) (propagated-inputs (modify-inputs (package-propagated-inputs dealii) (delete "hdf5" "sundials") (prepend hdf5-parallel-openmpi openmpi p4est-openmpi petsc-openmpi slepc-openmpi sundials-openmpi trilinos-for-dealii-openmpi))) (arguments (substitute-keyword-arguments (package-arguments dealii) ((#:configure-flags flags) #~(cons "-DDEAL_II_WITH_MPI=ON" #$flags)))) (synopsis "Finite element library (with MPI support)"))) (define-public flann (package (name "flann") (version "1.9.1") (home-page "https://github.com/mariusmuja/flann/") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0p56fl2yx1r86ds1mgjq40926jdcgq3hka7p3l1hv2acv9jxp15x")) (patches (search-patches "flann-cmake-3.11.patch")))) (build-system cmake-build-system) (outputs '("out")) (native-inputs (list unzip)) (inputs `(("hdf5" ,hdf5) ;; FIXME: 'mkoctfile' fails with a linker error: ;; ld: cannot find -loctinterp ;; ld: cannot find -loctave ;; Disable it for now. ;;("octave" ,octave-cli) ("python" ,python-2) ; print syntax ("zlib" ,zlib))) (arguments `(;; The 'share/flann/octave' contains a .mex file, which is an ELF file ;; taken 46 MiB unstripped, and 6 MiB stripped. #:strip-directories '("lib" "lib64" "libexec" "bin" "sbin" "share/flann/octave") ;; Save 12 MiB by not installing .a files. Passing ;; '-DBUILD_STATIC_LIBS=OFF' has no effect. #:phases (modify-phases %standard-phases (add-after 'install 'remove-static-libraries (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (lib (string-append out "/lib"))) (for-each delete-file (find-files lib "\\.a$")) #t)))) #:tests? #f)) ; The test data are downloaded from the Internet. (synopsis "Library for approximate nearest neighbors computation") (description "FLANN is a library for performing fast approximate nearest neighbor searches in high dimensional spaces. It implements a collection of algorithms and a system for automatically choosing the best algorithm and optimum parameters depending on the dataset. FLANN is written in C++ and contains bindings for C, Octave and Python.") (license (license:non-copyleft "file://COPYING" "See COPYING in the distribution.")))) (define-public wcalc (package (name "wcalc") (version "2.5") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/w-calc/Wcalc/" version "/" "wcalc-" version ".tar.bz2")) (sha256 (base32 "1vi8dl6rccqiq1apmpwawyg2ywx6a1ic1d3cvkf2hlwk1z11fb0f")) (snippet #~(begin (for-each delete-file (list "src/common/scanner.c" "src/common/parser.c" "src/common/parser.h")))))) (build-system gnu-build-system) (inputs (list mpfr readline)) (native-inputs (list bison flex)) (home-page "http://w-calc.sourceforge.net/index.php") (synopsis "Flexible command-line scientific calculator") (description "Wcalc is a very capable calculator. It has standard functions (sin, asin, and sinh for example, in either radians or degrees), many pre-defined constants (pi, e, c, etc.), support for using variables, \"active\" variables, a command history, hex/octal/binary input and output, unit conversions, embedded comments, and an expandable expression entry field. It evaluates expressions using the standard order of operations.") (license license:gpl2+))) (define-public xaos (package (name "xaos") (version "4.2.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/xaos-project/XaoS") (commit (string-append "release-" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0maw5am6rrkyjrprfg113zjq37mqj0iaznkg4h2927ff7wrprc94")))) (build-system gnu-build-system) (native-inputs `(("gettext" ,gettext-minimal) ("qtbase" ,qtbase-5) ("qttools-5" ,qttools-5))) (inputs (list libx11 zlib libpng gsl)) ;; The upstream project file ("XaoS.pro") and the Makefile it generates are ;; not enough for this package to install properly. These phases fix that. (arguments `(#:tests? #f ;no "check" target #:phases (modify-phases %standard-phases (add-before 'configure 'make-qt-deterministic (lambda _ ;; Make Qt deterministic. (setenv "QT_RCC_SOURCE_DATE_OVERRIDE" "1") #t)) (replace 'configure (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (substitute* "XaoS.pro" ;; The DESTDIR is originally set to install the xaos binary to ;; the "bin" folder inside the build directory. Setting make ;; flags doesn't seem to change this. (("DESTDIR.*$") (string-append "DESTDIR=" out "/bin")) ;; Set the correct path to the lrelease binary. (("lrelease-qt5") "lrelease")) (substitute* "src/include/config.h" (("/usr/share/XaoS") (string-append out "/share/XaoS"))) (invoke "qmake")))) (add-after 'install 'install-data (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (share (string-append out "/share"))) (mkdir-p share) (for-each (lambda (folder) (copy-recursively folder (string-append share "/XaoS/" folder))) '("catalogs" "examples" "tutorial")) (install-file "xdg/xaos.png" (string-append share "/pixmaps")) (install-file "xdg/xaos.desktop" (string-append share "/applications"))) #t))))) (synopsis "Real-time fractal zoomer") (description "GNU XaoS is a graphical program that generates fractal patterns and allows you to zoom in and out of them infinitely in a fluid, continuous manner. It also includes tutorials that help to explain how fractals are built. It can generate many different fractal types such as the Mandelbrot set.") (home-page "https://xaos-project.github.io/") (license license:gpl2+))) (define-public hypre (package (name "hypre") (version "2.20.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/hypre-space/hypre") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "14iqjwg5sv1qjn7c2cfv0xxmn9rwamjrhh9hgs8fjbywcbvrkjdi")))) (build-system gnu-build-system) (outputs '("out" ;5.3 MiB of headers and libraries "doc")) ;12 MiB of documentation (native-inputs (list doc++ doxygen python python-breathe python-sphinx (texlive-updmap.cfg (list texlive-adjustbox texlive-amsfonts texlive-bibtex texlive-capt-of texlive-caption texlive-cm texlive-courier texlive-etoolbox texlive-helvetic texlive-jknappen texlive-sectsty texlive-tex-gyre texlive-wasy texlive-xcolor texlive-xypic texlive-generic-listofitems texlive-latex-cmap texlive-latex-colortbl texlive-latex-etoc texlive-latex-fancyhdr texlive-latex-fancyvrb texlive-latex-float texlive-latex-fncychap texlive-latex-framed texlive-latex-geometry texlive-latex-hanging texlive-hyperref texlive-latex-multirow texlive-latex-natbib texlive-latex-needspace texlive-latex-newunicodechar texlive-latex-parskip texlive-latex-stackengine texlive-latex-tabulary texlive-latex-titlesec texlive-latex-tocloft texlive-latex-upquote texlive-latex-varwidth texlive-ulem texlive-wasysym texlive-wrapfig)))) (inputs (list openblas lapack)) (arguments `(#:modules ((srfi srfi-1) ,@%gnu-build-system-modules) #:configure-flags '("--enable-shared" "--disable-fortran" "--without-MPI" "--with-openmp" "--with-fei" "--with-lapack" "--with-blas") #:phases (modify-phases %standard-phases (add-before 'configure 'chdir-src (lambda _ (chdir "src"))) (replace 'configure (lambda* (#:key build target configure-flags #:allow-other-keys #:rest args) (let* ((configure (assoc-ref %standard-phases 'configure))) (apply configure (append args (list #:configure-flags (cons (string-append "--host=" (or target build)) configure-flags))))))) (add-after 'build 'build-docs (lambda _ (invoke "make" "-C" "docs"))) (replace 'check (lambda _ (setenv "LD_LIBRARY_PATH" (string-append (getcwd) "/hypre/lib")) (setenv "PATH" (string-append "." ":" (getenv "PATH"))) (invoke "make" "check" "CHECKRUN=") (for-each (lambda (filename) (let ((size (stat:size (stat filename)))) (when (positive? size) (error (format #f "~a size ~d; error indication~%" filename size))))) (find-files "test" ".*\\.err$")))) (add-after 'install 'install-docs (lambda* (#:key outputs #:allow-other-keys) ;; Custom install because docs/Makefile doesn't honor ${docdir}. (let* ((doc (assoc-ref outputs "doc")) (docdir (string-append doc "/share/doc/hypre-" ,version))) (with-directory-excursion "docs" (for-each (lambda (base) (install-file (string-append base ".pdf") docdir) (copy-recursively (string-append base "-html") (string-append docdir "/" base))) '("usr-manual" "ref-manual"))))))))) (home-page "https://computing.llnl.gov/projects\ /hypre-scalable-linear-solvers-multigrid-methods") (synopsis "Library of solvers and preconditioners for linear equations") (description "HYPRE is a software library of high performance preconditioners and solvers for the solution of large, sparse linear systems of equations. It features multigrid solvers for both structured and unstructured grid problems.") (license license:lgpl2.1))) (define-public hypre-openmpi (package (inherit hypre) (name "hypre-openmpi") (inputs (modify-inputs (package-inputs hypre) (prepend openmpi))) (arguments (substitute-keyword-arguments (package-arguments hypre) ((#:configure-flags flags) ``("--with-MPI" ,@(delete "--without-MPI" ,flags))) ((#:phases phases) `(modify-phases ,phases (add-before 'check 'mpi-setup ,%openmpi-setup))))) (synopsis "Parallel solvers and preconditioners for linear equations") (description "HYPRE is a software library of high performance preconditioners and solvers for the solution of large, sparse linear systems of equations on parallel computers. It features parallel multigrid solvers for both structured and unstructured grid problems."))) (define-public matio (package (name "matio") (version "1.5.19") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/matio/matio/" version "/" "matio-" version ".tar.gz")) (sha256 (base32 "0vr8c1mz1k6mz0sgh6n3scl5c3a71iqmy5fnydrgq504icj4vym4")))) (build-system gnu-build-system) (inputs (list zlib hdf5-1.8)) (home-page "http://matio.sourceforge.net/") (synopsis "Library for reading and writing MAT files") (description "Matio is a library for reading and writing MAT files. It supports compressed MAT files, as well as newer (version 7.3) MAT files.") (license license:bsd-2))) (define-public vc (package (name "vc") (version "1.4.2") (source (origin (method url-fetch) (uri (string-append "https://github.com/VcDevel/Vc/releases/" "download/" version "/Vc-" version ".tar.gz")) (sha256 (base32 "0lirdqzcxys9walz04bllsphydynk7973aimd5k1h1qbwi8z3lsh")))) (build-system cmake-build-system) (arguments '(#:configure-flags '("-DBUILD_TESTING=ON" ;; By default, Vc will optimize for the CPU of the build machine. ;; Setting this to "none" makes it create portable binaries. See ;; "cmake/OptimizeForArchitecture.cmake". "-DTARGET_ARCHITECTURE=none") #:phases (modify-phases %standard-phases (add-after 'unpack 'copy-testdata (lambda* (#:key inputs native-inputs #:allow-other-keys) (let ((testdata (assoc-ref (or native-inputs inputs) "testdata"))) (copy-recursively testdata "tests/testdata") #t)))))) (native-inputs `(("virtest" ,virtest) ;; This is a submodule in the git project, but not part of the ;; released sources. See the git branch for the commit to take. ("testdata" ,(let ((commit "9ada1f34d6a41f1b5553d6223f277eae72c039d3")) (origin (method git-fetch) (uri (git-reference (url "https://github.com/VcDevel/vc-testdata") (commit "9ada1f34d6a41f1b5553d6223f277eae72c039d3"))) (file-name (git-file-name "vc-testdata" (string-take commit 7))) (sha256 (base32 "1hkhqib03qlcq412ym2dciynfxcdr2ygqhnplz4l1vissr1wnqn2"))))))) (synopsis "SIMD vector classes for C++") (description "Vc provides portable, zero-overhead C++ types for explicitly data-parallel programming. It is a library designed to ease explicit vectorization of C++ code. Its types enable explicitly stating data-parallel operations on multiple values. The parallelism is therefore added via the type system. Vc has an intuitive API and provides portability between different compilers and compiler versions as well as portability between different vector instruction sets. Thus, an application written with Vc can be compiled for: @enumerate @item AVX and AVX2 @item SSE2 up to SSE4.2 or SSE4a @item Scalar @item MIC @item NEON (in development) @item NVIDIA GPUs / CUDA (in development) @end enumerate\n") (home-page "https://github.com/VcDevel/Vc") ;; "No support_???.cpp file exists for this architecture." (supported-systems '("x86_64-linux" "i686-linux")) (license license:bsd-3))) (define-public reducelcs ;; This is the last commit which is available upstream, no ;; release happened since 2010. (let ((commit "474f88deb968061abe8cf11c959e02319b8ae5c0") (revision "1")) (package (name "reducelcs") (version (string-append "1.0-" revision "." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/gdv/Reduce-Expand-for-LCS") (commit commit))) (file-name (string-append name "-" version "-checkout")) (sha256 (base32 "1rllzcfwc042c336mhq262a8ha90x6afq30kvk60r7i4761j4yjm")))) (build-system gnu-build-system) (inputs (list openlibm)) (arguments `(#:tests? #f ; no tests #:phases (modify-phases %standard-phases (delete 'configure) ; No configure script exists. (replace 'install ; No install phase exists. (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (install-file "Approximation" bin) (install-file "CollectResults" bin) (install-file "GenerateInstances" bin) #t)))))) (synopsis "Approximate Longest Commons Subsequence computation tool") (description "@code{reduceLCS} is an implementation of the Reduce-Expand algorithm for LCS. It is a fast program to compute the approximate Longest Commons Subsequence of a set of strings.") (home-page "https://github.com/gdv/Reduce-Expand-for-LCS") (license license:gpl3+)))) (define-public jacal (package (name "jacal") (version "1c7") (source (origin (method url-fetch) (uri (string-append "http://groups.csail.mit.edu/mac/ftpdir/scm/jacal-" version ".zip")) (sha256 (base32 "06a5sx9ikd62bpnd898g3yk818b020b1a27mk7dbfla2zizib4xz")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'build 'pre-build ;; Don't use upstream's script - it really doesn't fit into ;; Guix's functional paradigm. (lambda* (#:key inputs outputs #:allow-other-keys) (substitute* "Makefile" (("^install: install-script") "install: ")))) (add-after 'install 'post-install ;; Instead, we provide our own simplified script. (lambda* (#:key inputs outputs #:allow-other-keys) (let ((wrapper (string-append (assoc-ref outputs "out") "/bin/jacal"))) (format (open wrapper (logior O_WRONLY O_CREAT)) (string-append "#!~a\nexec ~a/bin/scm -ip1 " "-e '(slib:load \"~a/lib/jacal/math\") " "(math)' \"$@\"\n") (which "bash") (assoc-ref inputs "scm") (assoc-ref outputs "out")) (chmod wrapper #o555)))) (replace 'configure (lambda* (#:key outputs #:allow-other-keys) (invoke "sh" "configure" (string-append "--prefix=" (assoc-ref outputs "out")))))))) (inputs (list scm)) (native-inputs (list unzip texinfo)) (synopsis "Symbolic mathematics system") (description "GNU JACAL is an interactive symbolic mathematics program based on Scheme. It manipulate and simplify a range of mathematical expressions such as equations, scalars, vectors, and matrices.") (home-page "https://www.gnu.org/software/jacal/") (license license:gpl3+))) (define-public z3 (package (name "z3") (version "4.8.17") (home-page "https://github.com/Z3Prover/z3") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit (string-append "z3-" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1vvb09q7w7zd29qc4qjysrrhyylszm1wf6azkff004ixwn026b05")))) (build-system cmake-build-system) (arguments (list #:imported-modules `((guix build python-build-system) ,@%cmake-build-system-modules) #:modules '((guix build cmake-build-system) (guix build utils) ((guix build python-build-system) #:select (site-packages))) #:configure-flags #~(list "-DZ3_BUILD_PYTHON_BINDINGS=ON" "-DZ3_LINK_TIME_OPTIMIZATION=ON" (string-append "-DCMAKE_INSTALL_PYTHON_PKG_DIR=" #$output "/lib/python" #$(version-major+minor (package-version python-wrapper)) "/site-packages")) #:phases #~(modify-phases %standard-phases (replace 'check (lambda* (#:key parallel-build? tests? #:allow-other-keys) (when tests? (invoke "make" "test-z3" (format #f "-j~a" (if parallel-build? (parallel-job-count) 1))) (invoke "./test-z3" "/a")))) (add-after 'install 'compile-python-modules (lambda _ (setenv "PYTHONHASHSEED" "0") (invoke "python" "-m" "compileall" "--invalidation-mode=unchecked-hash" #$output))) ;; This step is missing in the CMake build system, do it here. (add-after 'compile-python-modules 'fix-z3-library-path (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((dest (string-append (site-packages inputs outputs) "/z3/lib/libz3.so")) (z3-lib (string-append #$output "/lib/libz3.so"))) (mkdir-p (dirname dest)) (symlink z3-lib dest))))))) (native-inputs (list which python-wrapper)) (synopsis "Theorem prover") (description "Z3 is a theorem prover and @dfn{satisfiability modulo theories} (SMT) solver. It provides a C/C++ API, as well as Python bindings.") (license license:expat))) (define-public ocaml-z3 (package (inherit z3) (name "ocaml-z3") (build-system gnu-build-system) (arguments `(#:imported-modules ((guix build python-build-system) ,@%gnu-build-system-modules) #:modules (((guix build python-build-system) #:select (site-packages)) (guix build gnu-build-system) (guix build utils)) #:tests? #f; no ml tests #:phases (modify-phases %standard-phases (add-before 'configure 'bootstrap (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (setenv "OCAMLFIND_LDCONF" "ignore") (setenv "OCAMLFIND_DESTDIR" (string-append out "/lib/ocaml/site-lib")) (mkdir-p (string-append out "/lib/ocaml/site-lib")) (substitute* "scripts/mk_util.py" (("LIBZ3 = LIBZ3") (string-append "LIBZ3 = LIBZ3 + ' -dllpath " out "/lib'")) ;; Do not build z3 again, use the library passed as input ;; instead (("z3linkdep,") "\"\",") (("z3linkdep)") "\"\")")) (invoke "python" "scripts/mk_make.py")))) (replace 'configure (lambda* (#:key inputs outputs #:allow-other-keys) (invoke "./configure" "--ml" (string-append "--prefix=" (assoc-ref outputs "out"))))) (add-after 'configure 'change-directory (lambda _ (chdir "build") #t)) (replace 'build (lambda _ (invoke "make" "ml"))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (invoke "ocamlfind" "install" "-destdir" (string-append (assoc-ref outputs "out") "/lib/ocaml/site-lib") "z3" "api/ml/META" "api/ml/z3enums.mli" "api/ml/z3enums.cmi" "api/ml/z3enums.cmx" "api/ml/z3native.mli" "api/ml/z3native.cmi" "api/ml/z3native.cmx" "../src/api/ml/z3.mli" "api/ml/z3.cmi" "api/ml/z3.cmx" "api/ml/libz3ml.a" "api/ml/z3ml.a" "api/ml/z3ml.cma" "api/ml/z3ml.cmxa" "api/ml/z3ml.cmxs" "api/ml/dllz3ml.so")))))) (native-inputs `(("which" ,which) ("python" ,python-wrapper) ("ocaml" ,ocaml) ("ocaml-findlib" ,ocaml-findlib))) (propagated-inputs (list ocaml-zarith)) (inputs (list z3)))) (define-public elpa (package (name "elpa") (version "2018.11.001") (source (origin (method url-fetch) (uri (string-append "https://elpa.mpcdf.mpg.de/software/" "tarball-archive/Releases/" version "/elpa-" version ".tar.gz")) (sha256 (base32 "05hv3v5i6xmziaizw350ff72y1c3k662r85fm3xfdrkclj5zw9yc")))) (build-system gnu-build-system) (native-inputs `(("fortran" ,gfortran) ("perl" ,perl))) ;for configure and deps (inputs `(("blas" ,openblas))) (arguments `(#:configure-flags `("--enable-openmp" "--with-mpi=no" ;; ELPA unfortunately does not support runtime dispatch, so we can ;; only enable the "generic" kernels. See the "Cross compilation" ;; section of INSTALL.md. "--enable-generic" "--disable-sse" "--disable-sse-assembly" ;Require SSE3 "--disable-avx" "--disable-avx2" "--disable-avx512" ,(string-append "CFLAGS=-O3 " "-funsafe-loop-optimizations -funsafe-math-optimizations " "-ftree-vect-loop-version -ftree-vectorize " ,(let ((system (or (%current-target-system) (%current-system)))) (cond ((or (string-prefix? "x86_64" system) (string-prefix? "i686" system)) "-msse2") (else ""))))) #:parallel-tests? #f ;tests are multi-threaded, via BLAS #:phases (modify-phases %standard-phases (add-before 'configure 'patch-header-generation (lambda _ (substitute* "configure" (("^ *make.*top_srcdir=\"\\$srcdir\"" &) (string-append & " CPP=\"$CPP\""))) #t)) (add-before 'check 'setup-tests (lambda _ ;; Decrease test time and RAM use by computing fewer eigenvalues. ;; The flags are (MATRIX-SIZE, EIGENVALUES, BLOCK-SIZE), where ;; the default is (500, 250, 16) for C tests and (5000, 150, 16) ;; for Fortran. This also causes several tests to pass that ;; otherwise would otherwise fail with matrix size 5000; possibly ;; due to floating point tolerances that are too tight. (setenv "TEST_FLAGS" "1500 50 16") ;from elpa.spec (setenv "OMP_NUM_THREADS" (number->string (parallel-job-count))) (substitute* "Makefile" ;; Test scripts are generated, patch the shebang (("#!/bin/bash") (string-append "#!" (which "sh")))) #t))))) (home-page "https://elpa.mpcdf.mpg.de") (synopsis "Eigenvalue solvers for symmetric matrices") (description "The ELPA library provides efficient and scalable direct eigensolvers for symmetric matrices.") (license license:lgpl3))) (define-public elpa-openmpi (package (inherit elpa) (name "elpa-openmpi") (inputs `(("mpi" ,openmpi) ("scalapack" ,scalapack) ,@(package-inputs elpa))) (arguments (substitute-keyword-arguments (package-arguments elpa) ((#:configure-flags cf '()) `(cons "--with-mpi=yes" (delete "--with-mpi=no" ,cf))) ((#:phases phases '%standard-phases) `(modify-phases ,phases (add-before 'check 'mpi-setup (lambda _ ;; Tests use 2 mpi tasks by default, use our remaining build ;; cores as OpenMP threads. (setenv "OMP_NUM_THREADS" (number->string (max (quotient (parallel-job-count) 2) 1))) (,%openmpi-setup))))))) (synopsis "Eigenvalue solvers for symmetric matrices (with MPI support)"))) (define-public elemental (package (name "elemental") (version "0.87.7") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/elemental/Elemental") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1687xpjjzig27y2pnqv7hv09smpijyfdpz7qjgmcxf4shfajlfkc")))) (build-system cmake-build-system) (home-page "https://github.com/elemental/Elemental") (native-inputs (list gfortran)) (inputs `(("blas" ,openblas) ("gfortran:lib" ,gfortran "lib") ("gmp" ,gmp) ("lapack" ,lapack) ("metis" ,metis) ("mpc" ,mpc) ("mpfr" ,mpfr) ("mpi" ,openmpi) ("qd" ,qd))) (arguments `(#:build-type "Release" ;default RelWithDebInfo not supported #:configure-flags `("-DEL_DISABLE_PARMETIS:BOOL=YES" "-DEL_AVOID_COMPLEX_MPI:BOOL=NO" "-DEL_CACHE_WARNINGS:BOOL=YES" "-DEL_TESTS:BOOL=YES" "-DCMAKE_INSTALL_LIBDIR=lib" "-DGFORTRAN_LIB=gfortran") #:phases (modify-phases %standard-phases (add-before 'check 'mpi-setup ,%openmpi-setup) (add-before 'check 'setup-tests (lambda _ ;; Parallelism is done at the MPI layer. (setenv "OMP_NUM_THREADS" "1") #t)) (add-after 'install 'remove-tests (lambda* (#:key outputs #:allow-other-keys) ;; Tests are installed, with no easy configuration ;; switch to prevent this, so delete them. (delete-file-recursively (string-append (assoc-ref outputs "out") "/bin")) #t))))) (synopsis "Dense and sparse-direct linear algebra and optimization") (description "Elemental is a modern C++ library for distributed-memory dense and sparse-direct linear algebra, conic optimization, and lattice reduction.") (license license:bsd-2))) (define-public mcrl2 (package (name "mcrl2") (version "202206.0") (source (origin (method url-fetch) (uri (string-append "https://www.mcrl2.org/download/release/mcrl2-" version ".tar.gz")) (patches (search-patches "mcrl2-fix-1687.patch" "mcrl2-fix-counterexample.patch")) (sha256 (base32 "0alpck09pbvwk4axqmrvcjmsabsn20yayq5b3apq284n0hcbf01q")))) (inputs (list boost glu mesa qtbase-5)) (build-system cmake-build-system) (synopsis "Toolset for the mCRL2 formal specification language") (description "@dfn{mCRL2} (micro Common Representation Language 2) is a formal specification language for describing concurrent discrete event systems. Its toolset supports analysis and automatic verification, linearisation, simulation, state-space exploration and generation, and tools to optimise and analyse specifications. Also, state spaces can be manipulated, visualised and analysed.") (home-page "https://mcrl2.org") (license license:boost1.0))) (define-public mcrl2-minimal (package (inherit mcrl2) (name "mcrl2-minimal") (inputs (list boost)) (arguments '(#:configure-flags '("-DMCRL2_ENABLE_GUI_TOOLS=OFF"))))) (define-public tcalc (package (name "tcalc") (version "2.0") (source (origin (method url-fetch) (uri (string-append "https://sites.google.com/site/mohammedisam2000/tcalc/tcalc-" version ".tar.gz")) (sha256 (base32 "0jq806m4dqfia85nppfm75mml9w57g0cgv4cdw9bp3zymda83s0m")))) (build-system gnu-build-system) (synopsis "The terminal calculator") (description "The terminal calculator is a small program to help users of the GNU/Linux terminal do calculations simply and quickly. The formula to be calculated can be fed to @command{tcalc} through the command line.") (home-page "https://sites.google.com/site/mohammedisam2000/tcalc") (license license:gpl3+))) (define-public tiny-bignum (let ((commit "1d7a1f9b8e77316187a6b3eae8e68d60a6f9a4d4")) (package (name "tiny-bignum") (version (git-version "0" "0" commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/kokke/tiny-bignum-c") (commit commit))) (file-name (git-file-name "tiny-bignum" commit)) (sha256 (base32 "0vj71qlhlaa7d92bfar1kwqv6582dqrby8x3kdw0yzh82k2023g6")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) (add-after 'unpack 'patch-tests (lambda _ (substitute* "scripts/test_rand.py" (("\t") " ") (("\" % (\\w+)" _ symbol) (string-append "\" % int(" symbol ")"))) #t)) (replace 'check (lambda* (#:key tests? #:allow-other-keys) (when tests? (invoke "make" "test")) #t)) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let ((share (string-append (assoc-ref outputs "out") "/share")) (doc (string-append (assoc-ref outputs "out") "/doc"))) (mkdir-p share) (install-file "bn.c" share) (install-file "bn.h" share) (mkdir-p doc) (install-file "LICENSE" doc) (install-file "README.md" doc)) #t))))) (native-inputs `(("python" ,python-wrapper))) (home-page "https://github.com/kokke/tiny-bignum-c") (synopsis "Small portable multiple-precision unsigned integer arithmetic in C") (description "This library provides portable Arbitrary-precision unsigned integer arithmetic in C, for calculating with large numbers. Basic arithmetic (+, -, *, /, %) and bitwise operations (&, |, ^. <<, >>) plus increments, decrements and comparisons are supported.") (license license:unlicense)))) (define-public sundials (package (name "sundials") (version "6.2.0") (source (origin (method url-fetch) (uri (string-append "https://github.com/LLNL/sundials/releases/download/v" version "/sundials-" version ".tar.gz")) (sha256 (base32 "07gk9060xk3bzfqf8v4fqlp0rcxswiwlsy887zv87i1gfy9map8r")))) (build-system cmake-build-system) (native-inputs (list python-2)) ; For tests; syntax incompatible with Python 3. (inputs (list openblas suitesparse)) (arguments '(#:configure-flags `("-DCMAKE_C_FLAGS=-O2 -g -fcommon" "-DSUNDIALS_INDEX_SIZE=32" ;; Incompatible with 32-bit indices. ;;"-DBUILD_FORTRAN_MODULE_INTERFACE:BOOL=ON" "-DEXAMPLES_ENABLE_C:BOOL=ON" "-DEXAMPLES_ENABLE_CXX:BOOL=ON" ;; Requires -DBUILD_FORTRAN_MODULE_INTERFACE:BOOL=ON. ;;"-DEXAMPLES_ENABLE_F2003:BOOL=ON" "-DEXAMPLES_INSTALL:BOOL=OFF" "-DENABLE_KLU:BOOL=ON" ,(string-append "-DKLU_INCLUDE_DIR=" (assoc-ref %build-inputs "suitesparse") "/include") ,(string-append "-DKLU_LIBRARY_DIR=" (assoc-ref %build-inputs "suitesparse") "/lib")))) (home-page "https://computation.llnl.gov/projects/sundials") (synopsis "Suite of nonlinear and differential/algebraic equation solvers") (description "SUNDIALS is a family of software packages implemented with the goal of providing robust time integrators and nonlinear solvers that can easily be incorporated into existing simulation codes.") (properties '((release-monitoring-url . "https://computing.llnl.gov/projects/sundials/sundials-software"))) (license license:bsd-3))) (define-public sundials-openmpi (package/inherit sundials (name "sundials-openmpi") (propagated-inputs (list openmpi ;; Support for the below requires MPI. hypre-openmpi petsc-openmpi)) (arguments (substitute-keyword-arguments (package-arguments sundials) ((#:configure-flags flags '()) `(cons* "-DENABLE_MPI:BOOL=ON" "-DENABLE_HYPRE:BOOL=ON" (string-append "-DHYPRE_INCLUDE_DIR=" (assoc-ref %build-inputs "hypre-openmpi") "/include") (string-append "-DHYPRE_LIBRARY_DIR=" (assoc-ref %build-inputs "hypre-openmpi") "/lib") "-DENABLE_PETSC:BOOL=ON" (string-append "-DPETSC_DIR=" (assoc-ref %build-inputs "petsc-openmpi")) ,flags)) ((#:phases phases '%standard-phases) `(modify-phases ,phases (add-before 'check 'mpi-setup ,%openmpi-setup))))) (synopsis "SUNDIALS with MPI support"))) (define-public sundials-5 (package (inherit sundials) (name "sundials") (version "5.8.0") (source (origin (method url-fetch) (uri (string-append "https://github.com/LLNL/sundials/releases/download/v" version "/sundials-" version ".tar.gz")) (sha256 (base32 "04x2x0jchf9kbcw2a1c6f4h4as8sr6k2snfz8z9k897pa4rl1vfl")))))) (define-public sundials-openmpi-5 (package/inherit sundials-5 (name "sundials-openmpi") (propagated-inputs (package-propagated-inputs sundials-openmpi)) (arguments (package-arguments sundials-openmpi)) (synopsis (package-synopsis sundials-openmpi)))) (define-public sundials-julia (package (inherit sundials) (name "sundials-julia") (version "5.2.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/LLNL/sundials") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0nx4sqhmi126m14myzm7syv2053harav9snl0a247wnkcgs5rxrv")))) (inputs (modify-inputs (package-inputs sundials) (prepend gfortran lapack))) (arguments '(#:configure-flags `("-DCMAKE_C_FLAGS=-O2 -g -fcommon" "-DSUNDIALS_INDEX_SIZE=32" "-DKLU_ENABLE:BOOL=ON" ,(string-append "-DKLU_INCLUDE_DIR=" (assoc-ref %build-inputs "suitesparse") "/include") ,(string-append "-DKLU_LIBRARY_DIR=" (assoc-ref %build-inputs "suitesparse") "/lib") "-DLAPACK_ENABLE:BOOL=ON"))) (synopsis "SUNDIALS with LAPACK support as required by julia-sundials-jll"))) (define-public combinatorial-blas (package (name "combinatorial-blas") (version "1.6.2") (source (origin (method url-fetch) (uri (string-append "http://eecs.berkeley.edu/~aydin/CombBLAS_FILES/" "CombBLAS_beta_" (match (string-split version #\.) ((major minor patch) (string-append major minor "_" patch))) ;e.g. "16_2" ".tgz")) (sha256 (base32 "1a9wbgdqyy1whhfc0yl0yqkax3amnqa6iihhq48d063gc0jwfd9a")) (patches (search-patches "combinatorial-blas-awpm.patch" "combinatorial-blas-io-fix.patch")))) (build-system cmake-build-system) (inputs `(("mpi" ,openmpi) ("test-data" ,(origin (method url-fetch) (uri (string-append "https://people.eecs.berkeley.edu/~aydin/" "CombBLAS_FILES/testdata_combblas1.6.1.tgz")) (sha256 (base32 "01y2781cy3fww7znmidrp85mf8zx0c905w5vzvk1mgrmhhynim87")))))) (arguments `(#:configure-flags '("-DBUILD_SHARED_LIBS:BOOL=YES" "-DCMAKE_CXX_FLAGS=-DUSE_FUNNEL") #:parallel-tests? #f ;tests use 'mpiexec -n4' #:phases (modify-phases %standard-phases (add-before 'check 'mpi-setup ,%openmpi-setup) (add-before 'check 'test-setup (lambda* (#:key inputs #:allow-other-keys) (setenv "OMP_NUM_THREADS" "2") (invoke "tar" "xf" (assoc-ref inputs "test-data"))))))) (home-page "https://people.eecs.berkeley.edu/~aydin/CombBLAS/html/") (synopsis "Linear algebra primitives for graph analytics") (description "The Combinatorial BLAS (CombBLAS) is an extensible distributed-memory parallel graph library offering a small but powerful set of linear algebra primitives specifically targeting graph analytics.") (license (list license:gpl2+ ;include/psort/(funnel|sort)*.h license:x11 ;usort and psort license:bsd-3)))) ;CombBLAS and MersenneTwister.h (define-public dune-common (package (name "dune-common") (version "2.7.1") (source (origin (method url-fetch) (uri (string-append "https://dune-project.org/download/" version "/dune-common-" version ".tar.gz")) (sha256 (base32 "0sidwdkyrrqjkqhpvrlc991pzi5xzlvxk91s2n7qk3widwy7fch2")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list gmp metis openblas python superlu)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "DUNE, the Distributed and Unified Numerics Environment is a modular toolbox for solving @dfn{partial differential equations} (PDEs) with grid-based methods. It supports the easy implementation of methods like @dfn{Finite Elements} (FE), @dfn{Finite Volumes} (FV), and also @dfn{Finite Differences} (FD).") ;; GPL version 2 with "runtime exception" to make it behave like LGPLv2. (license license:gpl2))) (define-public dune-geometry (package (name "dune-geometry") (version "2.7.1") (source (origin (method url-fetch) (uri (string-append "https://dune-project.org/download/" version "/dune-geometry-" version ".tar.gz")) (sha256 (base32 "068mh3fd110xl27rwxqlqy4d9cpqw2vqm2pzfrripiaqscb3byfy")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common ;; Optional openblas gmp python)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "DUNE, the Distributed and Unified Numerics Environment is a modular toolbox for solving @dfn{partial differential equations} (PDEs) with grid-based methods. It supports the easy implementation of methods like @dfn{Finite Elements} (FE), @dfn{Finite Volumes} (FV), and also @dfn{Finite Differences} (FD). This package contains the basic DUNE geometry classes.") ;; GPL version 2 with "runtime exception" (license license:gpl2))) (define-public dune-uggrid (package (name "dune-uggrid") (version "2.7.1") (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.dune-project.org/staging/dune-uggrid.git") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "11qz52g9d5k96fqik2lyi80xryw174rnny074pj70ardl6zzz83p")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "DUNE, the Distributed and Unified Numerics Environment is a modular toolbox for solving @dfn{partial differential equations} (PDEs) with grid-based methods. It supports the easy implementation of methods like @dfn{Finite Elements} (FE), @dfn{Finite Volumes} (FV), and also @dfn{Finite Differences} (FD). This package contains the DUNE UG grid classes.") (license license:lgpl2.1))) (define-public dune-grid (package (name "dune-grid") (version "2.7.1") (source (origin (method url-fetch) (uri (string-append "https://dune-project.org/download/" version "/dune-grid-" version ".tar.gz")) (sha256 (base32 "15iws03hkbmr4a4rqqb0rriz1m8szl96wdr7gw0jmrcnlzbdbbx5")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common dune-geometry gmp metis openblas python)) (propagated-inputs (list dune-uggrid)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "DUNE, the Distributed and Unified Numerics Environment is a modular toolbox for solving @dfn{partial differential equations} (PDEs) with grid-based methods. It supports the easy implementation of methods like @dfn{Finite Elements} (FE), @dfn{Finite Volumes} (FV), and also @dfn{Finite Differences} (FD). This package contains the basic DUNE grid classes.") ;; GPL version 2 with "runtime exception" (license license:gpl2))) (define-public dune-istl (package (name "dune-istl") (version "2.7.1") (source (origin (method url-fetch) (uri (string-append "https://dune-project.org/download/" version "/dune-istl-" version ".tar.gz")) (sha256 (base32 "1cy69s1266hvnh8blznlvvkrf8i2g640rc3mf7kp872wgvdz4nb9")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases ;; XXX: istl/test/matrixtest.cc includes and fails to find ;; the stdlib types when the gfortran header is used. Remove gfortran ;; from CPLUS_INCLUDE_PATH as a workaround. (add-after 'set-paths 'hide-gfortran (lambda* (#:key inputs #:allow-other-keys) (let ((gfortran (assoc-ref inputs "gfortran"))) (setenv "CPLUS_INCLUDE_PATH" (string-join (delete (string-append gfortran "/include/c++") (string-split (getenv "CPLUS_INCLUDE_PATH") #\:)) ":")) #t))) (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common ;; Optional metis suitesparse superlu openblas gmp python)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "DUNE, the Distributed and Unified Numerics Environment is a modular toolbox for solving @dfn{partial differential equations} (PDEs) with grid-based methods. This is the iterative solver template library which provides generic sparse matrix/vector classes and a variety of solvers based on these classes. A special feature is the use of templates to exploit the recursive block structure of finite element matrices at compile time. Available solvers include Krylov methods, (block-) incomplete decompositions and aggregation-based algebraic multigrid.") ;; GPL version 2 with "runtime exception" (license license:gpl2))) (define-public dune-localfunctions (package (name "dune-localfunctions") (version "2.7.1") (source (origin (method url-fetch) (uri (string-append "https://dune-project.org/download/" version "/dune-localfunctions-" version ".tar.gz")) (sha256 (base32 "031i42anrhi0ngpvp42rdjbkic7v3008fwild9xg7flffwvnpshg")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases ;; XXX: localfunctions/test/lagrangeshapefunctiontest.cc includes ;; and fails to find the stdlib types when the gfortran header is used. ;; Hide gfortran from CPLUS_INCLUDE_PATH to ensure we get the GCC header. (add-after 'set-paths 'hide-gfortran (lambda* (#:key inputs #:allow-other-keys) (let ((gfortran (assoc-ref inputs "gfortran"))) (setenv "CPLUS_INCLUDE_PATH" (string-join (delete (string-append gfortran "/include/c++") (string-split (getenv "CPLUS_INCLUDE_PATH") #\:)) ":")) #t))) (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common dune-geometry ;; Optional metis superlu gmp)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") ; TODO (description "This DUNE module provides interface and implementation for shape functions defined on the DUNE reference elements. In addition to the shape function, interpolation operators and special keys are provided which can be used to assemble global function spaces on finite-element grids. This package provides an interface and implementation for shape functions defined on the DUNE reference elements. In addition to the shape function, interpolation operators and special keys are provided which can be used to assemble global function spaces on finite-element grids.") ;; GPL version 2 with "runtime exception" (license license:gpl2))) (define-public dune-alugrid ;; This was the last commit on the releases/2.7 branch as of 2021-12-17, ;; unfortunately there was no tag for any 2.7 release. (let ((commit "51bde29a2dfa7cfac4fb73d40ffd42b9c1eb1d3d")) (package (name "dune-alugrid") (version (git-version "2.7.1" "0" commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.dune-project.org/extensions/dune-alugrid.git") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0z16wg6llzxs7vjg2yilg31vwnkz8k050j6bspg3blbym0razy15")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'patch-include (lambda _ (substitute* "dune/alugrid/test/test-alugrid.cc" (("doc/grids/gridfactory/testgrids") "doc/dune-grid/grids/gridfactory/testgrids")) #t)) (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (setenv "CPLUS_INCLUDE_PATH" (string-append (assoc-ref inputs "dune-grid") "/share")) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common dune-geometry dune-grid ;; Optional metis openblas python superlu gmp zlib)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "ALUGrid is an adaptive, loadbalancing, unstructured implementation of the DUNE grid interface supporting either simplices or cubes.") (license license:gpl2+)))) (define-public dune-subgrid ;; This was the last commit on the releases/2.7 branch as of 2021-12-17. ;; Unfortunately the dune-subgrid repository contains no release tags. (let ((commit "45d1ee9f3f711e209695deee97912f4954f7f280")) (package (name "dune-subgrid") (version (git-version "2.7.1" "0" commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://git.imp.fu-berlin.de/agnumpde/dune-subgrid") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0xjf7865wil7kzym608kv3nc3ff3m3nlqich4k9wjyvy3lz6panh")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common dune-geometry dune-grid ;; Optional metis openblas gmp)) (native-inputs (list gfortran pkg-config)) (home-page "http://numerik.mi.fu-berlin.de/dune-subgrid/index.php") (synopsis "Distributed and Unified Numerics Environment") (description "The dune-subgrid module marks elements of another hierarchical dune grid. The set of marked elements can then be accessed as a hierarchical dune grid in its own right. Dune-Subgrid provides the full grid interface including adaptive mesh refinement.") (license license:gpl2+)))) (define-public dune-typetree (package (name "dune-typetree") (version "2.7.1") (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.dune-project.org/staging/dune-typetree.git") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1kx9k8i7pdw6l6ny6nq85v5p1nd6yxldzaj8k3nizaz3q1j407pv")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common ;; Optional openblas python metis superlu gmp)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "TypeTree is a template library for constructing and operating on statically typed trees of objects.") ;; Either GPL version 2 with "runtime exception" or LGPLv3+. (license (list license:lgpl3+ license:gpl2)))) (define-public dune-functions (package (name "dune-functions") (version "2.7.1") (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.dune-project.org/staging/dune-functions.git") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "04dhr4asnl38bf1gp8hrk31maav33m7q71lhl2n5yk1q1x6i77nw")))) (build-system cmake-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'disable-failing-tests (lambda _ (setenv "ARGS" ;; unable to load GMSH file in this test "--exclude-regex gridviewfunctionspacebasistest") #t)) (add-after 'build 'build-tests (lambda* (#:key make-flags parallel-build? #:allow-other-keys) (apply invoke "make" "build_tests" `(,@(if parallel-build? `("-j" ,(number->string (parallel-job-count))) '()) ,@make-flags))))))) (inputs (list dune-common dune-istl dune-localfunctions dune-grid dune-geometry dune-typetree openblas metis python superlu gmp)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Distributed and Unified Numerics Environment") (description "The dune-functions module provides an abstraction layer for global finite element functions. Its two main concepts are functions implemented as callable objects, and bases of finite element spaces.") ;; Either GPL version 2 with "runtime exception" or LGPLv3+. (license (list license:lgpl3+ license:gpl2)))) (define-public dune-pdelab ;; This was the last commit on the releases/2.7 branch as of 2021-12-17, ;; unfortunately there was no tag for any 2.7 release. (let ((commit "09aef74d95661d18a7789d2f517ae77797eec738")) (package (name "dune-pdelab") (version (git-version "2.7.1" "0" commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.dune-project.org/pdelab/dune-pdelab") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0nv69ayr4gln9m1s94z9zkrxqi8nzar3z6awnvgqz595nmjf82ac")))) (build-system cmake-build-system) (arguments '(#:tests? #f)) ; XXX: the tests cannot be compiled (inputs (list dune-common dune-istl dune-localfunctions dune-geometry dune-grid dune-typetree dune-functions ;; Optional openblas eigen metis python superlu gmp)) (native-inputs (list gfortran pkg-config)) (home-page "https://dune-project.org/") (synopsis "Differential equations solver toolbox") (description "PDELab is a partial differential equations solver toolbox built on top of DUNE, the Distributed and Unified Numerics Environment.") ;; Either GPL version 2 with "runtime exception" or LGPLv3+. (license (list license:lgpl3+ license:gpl2))))) (define add-openmpi-to-dune-package (let ((dune-package? (lambda (p) (string-prefix? "dune-" (package-name p))))) (package-mapping (lambda (p) (if (dune-package? p) (package (inherit p) (name (string-append (package-name p) "-openmpi")) (inputs (modify-inputs (package-inputs p) (append openmpi))) (arguments (substitute-keyword-arguments (package-arguments p) ((#:phases phases '%standard-phases) `(modify-phases ,phases (add-before 'check 'mpi-setup ,%openmpi-setup))))) (synopsis (string-append (package-synopsis p) " (with MPI support)"))) p)) (negate dune-package?)))) (define-public dune-common-openmpi (add-openmpi-to-dune-package dune-common)) (define-public dune-geometry-openmpi (add-openmpi-to-dune-package dune-geometry)) (define-public dune-istl-openmpi (add-openmpi-to-dune-package dune-istl)) (define-public dune-typetree-openmpi (add-openmpi-to-dune-package dune-typetree)) (define-public dune-uggrid-openmpi (add-openmpi-to-dune-package dune-uggrid)) (define-public dune-grid-openmpi (add-openmpi-to-dune-package dune-grid)) (define-public dune-alugrid-openmpi (add-openmpi-to-dune-package dune-alugrid)) (define-public dune-subgrid-openmpi (add-openmpi-to-dune-package dune-subgrid)) (define-public dune-localfunctions-openmpi (add-openmpi-to-dune-package dune-localfunctions)) (define-public dune-functions-openmpi (add-openmpi-to-dune-package dune-functions)) (define-public dune-pdelab-openmpi (add-openmpi-to-dune-package dune-pdelab)) (define-public mlucas (package (name "mlucas") (version "18") (source (origin (method url-fetch) (uri (string-append "https://mersenneforum.org/mayer/src/C/mlucas_v" version ".txz")) (sha256 (base32 "0h4xj6pyyac79ka5ibqjilfa3s9j3yxnzgpwc57b54kfh2bj3447")))) (build-system gnu-build-system) (inputs (list python-2)) (arguments `(#:tests? #f ; no tests #:phases (modify-phases %standard-phases (replace 'configure (lambda _ (chdir "src") (call-with-output-file "Makefile" (lambda (port) (format port "CC = gcc CFLAGS = -O3 ~a -DUSE_THREADS LDLIBS = -lm -lpthread -lrt Mlucas: $(addsuffix .o,$(basename $(wildcard *.c))) " ,(let ((system (or (%current-target-system) (%current-system)))) (cond ((string-prefix? "x86_64" system) "-DUSE_SSE2") (else "")))))) #t)) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let ((bin (string-append (assoc-ref outputs "out") "/bin"))) (install-file "Mlucas" bin) (install-file "primenet.py" bin)) #t))))) (home-page "https://www.mersenne.org") (synopsis "Great Internet Mersenne Prime Search (GIMPS) distributed computing client") (description "Mlucas performs Lucas-Lehmer primality testing of Mersenne numbers in search of a world-record prime. You may use it to test any suitable number as you wish, but it is preferable that you do so in a coordinated fashion, as part of the Great Internet Mersenne Prime Search (GIMPS). Mlucas also includes a simple Python script for assignment management via the GIMPS project's Primenet server.") (license license:gpl2+))) (define-public nauty (package (name "nauty") (version "2.7r4") (source (origin (method url-fetch) (uri (string-append "https://pallini.di.uniroma1.it/" "nauty" (string-join (string-split version #\.) "") ".tar.gz")) (sha256 (base32 "19j8i10cgnqavphj0p7kq939azxckj9ayjpjr6sg76g2dxdch45q")))) (build-system gnu-build-system) (outputs '("out" "lib")) (arguments (list #:test-target "checks" #:configure-flags #~(list "--enable-generic") ;prevent -march-native #:phases #~(modify-phases %standard-phases ;; Default make target does not build all available ;; executables. Create them now. (add-after 'build 'build-extra-programs (lambda _ (for-each (lambda (target) (invoke "make" target)) '("blisstog" "bliss2dre" "checks6" "sumlines")))) ;; Upstream does not provide any install target. (replace 'install (lambda _ (let* ((bin (string-append #$output "/bin")) (doc (string-append #$output "/share/doc/nauty/")) (include (string-append #$output:lib "/include/nauty")) (lib (string-append #$output:lib "/lib/nauty"))) (for-each (lambda (f) (install-file f bin)) '("addedgeg" "amtog" "assembleg" "biplabg" "blisstog" "bliss2dre" "catg" "checks6" "complg" "converseg" "copyg" "countg" "cubhamg" "deledgeg" "delptg" "directg" "dreadnaut" "dretodot" "dretog" "genbg" "genbgL" "geng" "genquarticg" "genrang" "genspecialg" "gentourng" "gentreeg" "hamheuristic" "labelg" "linegraphg" "listg" "multig" "newedgeg" "pickg" "planarg" "ranlabg" "shortg" "showg" "subdivideg" "sumlines" "twohamg" "underlyingg" "vcolg" "watercluster2" "NRswitchg")) (for-each (lambda (f) (install-file f include)) (find-files "." "\\.h$")) (for-each (lambda (f) (install-file f lib)) (find-files "." "\\.a$")) (for-each (lambda (f) (install-file f doc)) (append '("formats.txt" "README" "schreier.txt") (find-files "." "\\.pdf$"))))))))) (inputs (list gmp)) ;for sumlines (home-page "https://pallini.di.uniroma1.it/") (synopsis "Library for graph automorphisms") (description "@code{nauty} (No AUTomorphisms, Yes?) is a set of procedures for computing automorphism groups of graphs and digraphs. @code{nauty} computes graph information in the form of a set of generators, the size of the group, and the orbits of the group; it can also produce a canonical label. The @code{nauty} suite is written in C and comes with a command-line interface, a collection of command-line tools, and an Application Programming Interface (API). This package provides the static libraries required to run programs compiled against the nauty library.") (license license:asl2.0))) (define-public ppl (package (name "ppl") (version "1.2") (source (origin (method url-fetch) (uri (string-append "https://www.bugseng.com/products/ppl/download/" "ftp/releases/" version "/ppl-" version ".tar.gz")) (sha256 (base32 "1j5aji1g2vmdvc0gqz45n2ll2l2f6czca04wiyfl5g3sm3a6vhvb")))) (build-system gnu-build-system) (native-inputs (list m4)) (inputs (list glpk gmp)) (home-page "https://www.bugseng.com/parma-polyhedra-library") (synopsis "Parma Polyhedra Library for computations with polyhedra") (description "The Parma Polyhedra Library (PPL) provides numerical abstractions especially targeted at applications in the field of analysis and verification of complex systems. These abstractions include convex polyhedra, defined as the intersection of a finite number of (open or closed) halfspaces, each described by a linear inequality (strict or non-strict) with rational coefficients; some special classes of polyhedra shapes that offer interesting complexity/precision tradeoffs; and grids which represent regularly spaced points that satisfy a set of linear congruence relations. The library also supports finite powersets and products of (any kind of) polyhedra and grids, a mixed integer linear programming problem solver using an exact-arithmetic version of the simplex algorithm, a parametric integer programming solver, and primitives for termination analysis via the automatic synthesis of linear ranking functions.") (license license:gpl3+))) (define-public speedcrunch (package (name "speedcrunch") (version "0.12.0") (source (origin (method git-fetch) (uri (git-reference (url "https://bitbucket.org/heldercorreia/speedcrunch.git") (commit (string-append "release-" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0vh7cd1915bjqzkdp3sk25ngy8cq624mkh8c53c5bnzk357kb0fk")))) (build-system cmake-build-system) (inputs (list qtbase-5)) (native-inputs (list qttools-5)) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'chdir-to-src (lambda _ (chdir "src") #t))))) (synopsis "High-precision scientific calculator") (description "SpeedCrunch is a high-precision scientific calculator. It features a syntax-highlighted scrollable display and is designed to be fully used via keyboard. Some distinctive features are auto-completion of functions and variables, a formula book, and quick insertion of constants from various fields of knowledge.") (home-page "https://speedcrunch.org/") (license license:gpl2+))) (define-public minisat ;; This is the last commit which is available upstream, no ;; release happened since 2010. (let ((commit "37dc6c67e2af26379d88ce349eb9c4c6160e8543") (revision "1")) (package (name "minisat") (version (string-append "2.2.0-" revision "." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/niklasso/minisat") (commit commit))) (file-name (string-append name "-" version "-checkout")) (sha256 (base32 "091hf3qkm197s5r7xcr3m07xsdwyz2rqk1hc9kj0hn13imz09irq")) (patches (search-patches "minisat-friend-declaration.patch" "minisat-install.patch")))) (build-system gnu-build-system) (arguments '(#:make-flags (list (string-append "prefix=" %output)) #:tests? #f ;no check target #:phases (modify-phases %standard-phases (delete 'configure)))) (inputs `(("zlib:static" ,zlib "static") ("zlib" ,zlib))) (synopsis "Small, yet efficient, SAT solver") (description "MiniSat is a minimalistic, open-source SAT solver, developed to help researchers and developers alike to get started on SAT.") (home-page "http://minisat.se/MiniSat.html") (license license:expat)))) (define-public libqalculate (package (name "libqalculate") (version "3.19.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/Qalculate/libqalculate/") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1w44407wb552q21dz4m2nwwdi8b9hzjb2w1l3ffsikzqckc7wbyj")) (patches (search-patches "libqalculate-3.8.0-libcurl-ssl-fix.patch")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config) ("gettext" ,gettext-minimal) ("intltool" ,intltool) ("automake" ,automake) ("autoconf" ,autoconf) ("libtool" ,libtool) ("doxygen" ,doxygen) ("file" ,file))) (inputs (list gmp mpfr libxml2 curl icu4c gnuplot readline)) (arguments `(#:phases (modify-phases %standard-phases (add-before 'bootstrap 'setenv ;; Prevent the autogen.sh script to carry out the configure ;; script, which has not yet been patched to replace /bin/sh. (lambda _ (setenv "NOCONFIGURE" "TRUE") #t))))) (home-page "https://qalculate.github.io/") (synopsis "Multi-purpose cli desktop calculator and library") (description "Libqalculate is a multi-purpose cli desktop calculator and library. It provides basic and advanced functionality. Features include customizable functions, unit calculations, and conversions, physical constants, symbolic calculations (including integrals and equations), arbitrary precision, uncertainty propagation, interval arithmetic, plotting and a user-friendly cli.") (license license:gpl2+))) (define-public qalculate-gtk (package (name "qalculate-gtk") (version "3.19.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/Qalculate/qalculate-gtk/") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1nrx7gp6f1yalbdda1gb97azhbr4xclq2xf08vvbvsk8jfd6fd2v")))) (build-system glib-or-gtk-build-system) (native-inputs (list pkg-config intltool automake autoconf libtool file)) (inputs (list gmp mpfr libqalculate libxml2 glib gtk+)) (arguments `(#:phases (modify-phases %standard-phases (add-before 'bootstrap 'setenv ;; Prevent the autogen.sh script to carry out the configure ;; script, which has not yet been patched to replace /bin/sh. (lambda _ (setenv "NOCONFIGURE" "TRUE") #t))))) (home-page "https://qalculate.github.io/") (synopsis "Multi-purpose graphical desktop calculator") (description "Qalculate-gtk is the GTK frontend for libqalculate. It is a multi-purpose GUI desktop calculator. It provides basic and advanced functionality. Features include customizable functions, unit calculations, and conversions, physical constants, symbolic calculations (including integrals and equations), arbitrary precision, uncertainty propagation, interval arithmetic, plotting.") (license license:gpl2+))) (define-public numdiff (package (name "numdiff") (version "5.9.0") (source (origin (method url-fetch) (uri (string-append "mirror://savannah/numdiff/numdiff-" version ".tar.gz")) (sha256 (base32 "1vzmjh8mhwwysn4x4m2vif7q2k8i19x8azq7pzmkwwj4g48lla47")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; There are no tests. #:phases (modify-phases %standard-phases (add-before 'compress-documentation 'delete-precompressed-info-file (lambda _ (delete-file (string-append (assoc-ref %outputs "out") "/share/info/numdiff.info.gz")) #t))))) (home-page "https://nongnu.org/numdiff/") (synopsis "Compare files with numeric fields") (description "Numdiff compares files line by line and field by field, ignoring small numeric differences and differences in numeric formats.") (license license:gpl3+))) (define-public why3 (package (name "why3") (version "1.4.1") (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.inria.fr/why3/why3") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1yca6mx8bjm8x0i594ivh31aw45s6fbimmwfj8g2v9zwrgmr1i4s")))) (build-system ocaml-build-system) (native-inputs (list autoconf automake coq ocaml which)) (propagated-inputs (list camlzip ocaml-graph ocaml-menhir ocaml-num ocaml-zarith)) (inputs (list coq-flocq emacs-minimal zlib)) (arguments `(#:phases (modify-phases %standard-phases (add-before 'configure 'bootstrap (lambda _ (invoke "./autogen.sh") (setenv "CONFIG_SHELL" (which "sh")) (substitute* "configure" (("#! /bin/sh") (string-append "#!" (which "sh"))) ;; find ocaml-num in the correct directory (("\\$DIR/nums.cma") "$DIR/num.cma") (("\\$DIR/num.cmi") "$DIR/core/num.cmi")) #t)) (add-after 'configure 'fix-makefile (lambda _ (substitute* "Makefile" ;; find ocaml-num in the correct directory (("site-lib/num") "site-lib")) #t)) (add-after 'install 'install-lib (lambda _ (invoke "make" "byte") (invoke "make" "install-lib") #t))))) (home-page "http://why3.lri.fr") (synopsis "Deductive program verification") (description "Why3 provides a language for specification and programming, called WhyML, and relies on external theorem provers, both automated and interactive, to discharge verification conditions. Why3 comes with a standard library of logical theories (integer and real arithmetic, Boolean operations, sets and maps, etc.) and basic programming data structures (arrays, queues, hash tables, etc.). A user can write WhyML programs directly and get correct-by-construction OCaml programs through an automated extraction mechanism. WhyML is also used as an intermediate language for the verification of C, Java, or Ada programs.") (license license:lgpl2.1))) (define-public frama-c (package (name "frama-c") (version "24.0") (source (origin (method url-fetch) (uri (string-append "http://frama-c.com/download/frama-c-" version "-Chromium.tar.gz")) (sha256 (base32 "0x1xgip50jdz1phsb9rzwf2ra8lshn1hmd9g967xia402wrg3sjf")))) (build-system ocaml-build-system) (arguments `(#:tests? #f; no test target in Makefile #:phases (modify-phases %standard-phases (add-before 'configure 'export-shell (lambda* (#:key inputs #:allow-other-keys) (setenv "CONFIG_SHELL" (search-input-file inputs "/bin/sh"))))))) (inputs (list gmp)) (propagated-inputs (list ocaml-biniou ocaml-easy-format ocaml-graph ocaml-yojson ocaml-zarith why3)) (native-search-paths (list (search-path-specification (variable "FRAMAC_SHARE") (files '("share/frama-c")) (separator #f)) (search-path-specification (variable "FRAMAC_LIB") (files '("lib/frama-c")) (separator #f)))) (home-page "http://frama-c.com") (synopsis "C source code analysis platform") (description "Frama-C is an extensible and collaborative platform dedicated to source-code analysis of C software. The Frama-C analyzers assist you in various source-code-related activities, from the navigation through unfamiliar projects up to the certification of critical software.") (license license:lgpl2.1+))) (define-public blitz (package (name "blitz") (version "1.0.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/blitzpp/blitz") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0c88gc72j3zggyk4yrrip6i0v7xkx97l140vpy3xhxs2i7xy1461")))) (build-system cmake-build-system) (arguments `(#:configure-flags '("-DBUILD_DOC=ON" "-DBUILD_TESTING=ON") ;; The default "check" target also includes examples and benchmarks. #:test-target "check-testsuite" #:phases (modify-phases %standard-phases (add-after 'build 'build-doc (lambda _ (invoke "make" "-j" (number->string (parallel-job-count)) "blitz-doc")))))) (native-inputs (list python texinfo)) (synopsis "C++ template class library for multidimensional arrays") (description "Blitz++ is a C++ template class library that provides high-performance multidimensional array containers for scientific computing.") (home-page "https://github.com/blitzpp/blitz") (license (list license:artistic2.0 license:bsd-3 license:lgpl3+)))) (define-public fxdiv ;; There is currently no tag in this repo. (let ((commit "63058eff77e11aa15bf531df5dd34395ec3017c8") (version "0.0") (revision "1")) (package (name "fxdiv") (version (git-version version revision commit)) (home-page "https://github.com/Maratyszcza/FXdiv") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0zwzh8gmbx4m6b18s5nf13b0dk5yjkd1fs8f421bl7fz5f9gjd9f")) (patches (search-patches "fxdiv-system-libraries.patch")))) (build-system cmake-build-system) (inputs (list googletest googlebenchmark)) (synopsis "C++ library for division via fixed-point multiplication by inverse") (description "On modern CPUs and GPUs, integer division is several times slower than multiplication. FXdiv implements an algorithm to replace an integer division with a multiplication and two shifts. This algorithm improves performance when an application performs repeated divisions by the same divisor.") (license license:expat)))) (define-public fp16 ;; There is currently no tag in this repo. (let ((commit "0a92994d729ff76a58f692d3028ca1b64b145d91") (version "0.0") (revision "1")) (package (name "fp16") (version (git-version version revision commit)) (home-page "https://github.com/Maratyszcza/FP16") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "05mm4vrxsac35hjf5djif9r6rdxj9ippg97ia3p6q6b8lrp7srwv")) (patches (search-patches "fp16-system-libraries.patch")))) (build-system cmake-build-system) (arguments `(#:imported-modules ((guix build python-build-system) ,@%cmake-build-system-modules) #:modules (((guix build python-build-system) #:select (site-packages)) (guix build cmake-build-system) (guix build utils)) #:phases (modify-phases %standard-phases (add-after 'install 'move-python-files (lambda* (#:key inputs outputs #:allow-other-keys) ;; Python files get installed to $includedir (!). ;; Move them to the usual Python site directory. (let* ((out (assoc-ref outputs "out")) (include (string-append out "/include")) (site (site-packages inputs outputs)) (target (string-append site "/fp16"))) (mkdir-p target) (for-each (lambda (file) (rename-file file (string-append target "/" (basename file)))) (find-files include "\\.py$")))))))) (native-inputs (list python-wrapper)) (inputs (list psimd googletest googlebenchmark)) (synopsis "C++ library for half-precision floating point formats") (description "This header-only C++ library implements conversion to and from half-precision floating point formats.") (license license:expat)))) (define-public optizelle (let ((commit "ed4160b5287518448caeb34789d92dc6a0b7e2cc")) (package (name "optizelle") (version (git-version "1.3.0" "0" commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/OptimoJoe/Optizelle") (commit commit))) (file-name (git-file-name "optizelle" commit)) (sha256 (base32 "0rjrs5sdmd33a9f4xm8an7p0953aa0bxsmr4hs3ss1aad9k181vq")) (modules '((guix build utils))) (snippet '(begin ;; Reduce the stopping tolerance in one test so that the ;; convergence check returns the correct stopping ;; condition. (substitute* "src/unit/linear_algebra/tcg_loss_of_orthogonality.cpp" (("1e-13") "5e-14")) ;; Skip one set of python tests. See ;; https://github.com/OptimoJoe/Optizelle/issues/2. (substitute* "src/examples/inequality_scaling/CMakeLists.txt" (("add_unit(.*)\\$\\{interfaces\\}(.*)$" all middle end) (string-append "add_unit" middle "\"cpp\"" end))) ;; Install the licence for Optizelle, without also ;; including the licences for the dependencies. (substitute* "licenses/CMakeLists.txt" (("file.*package.*$" all) (string-append "# " all)) ((".*[^l].[.]txt\\)\n") "") (("add_license.*\"\n") "")) #t)))) (build-system cmake-build-system) (arguments `(#:imported-modules ((guix build python-build-system) ,@%cmake-build-system-modules) #:modules (((guix build python-build-system) #:select (python-version)) (guix build cmake-build-system) (guix build utils)) #:configure-flags `("-DCMAKE_CXX_FLAGS:STRING=-pthread" "-DENABLE_CPP_UNIT:BOOL=ON" "-DENABLE_CPP_EXAMPLES:BOOL=ON" "-DENABLE_PYTHON:BOOL=ON" "-DENABLE_PYTHON_UNIT:BOOL=ON" "-DENABLE_PYTHON_EXAMPLES:BOOL=ON" ,(string-append "-DBLAS_LIBRARY:FILEPATH=" (assoc-ref %build-inputs "blas/lapack") "/lib/libopenblas.so") ,(string-append "-DLAPACK_LIBRARY:FILEPATH=" (assoc-ref %build-inputs "fortran:lib") "/lib/libgfortran.so;" (assoc-ref %build-inputs "fortran:lib") "/lib/libquadmath.so")) #:phases (modify-phases %standard-phases (add-after 'unpack 'set-numpy-path ; Needed for the unit tests. (lambda* (#:key inputs #:allow-other-keys) (let* ((pyver (python-version (assoc-ref inputs "python"))) (npdir (string-append (assoc-ref inputs "numpy") "/lib/python" pyver "/site-packages"))) (substitute* "src/cmake/Modules/Optizelle.cmake" (("PYTHONPATH=") (string-append "LD_LIBRARY_PATH=$ENV{LIBRARY_PATH};" "PYTHONPATH=" npdir ":")))))) (delete 'install-license-files)))) ; LICENSE.txt is installed. (inputs `(("blas/lapack" ,openblas) ("fortran:lib" ,gfortran "lib") ("jsoncpp" ,jsoncpp) ("numpy" ,python-numpy) ("python" ,python))) (native-inputs `(("fortran" ,gfortran) ("pkg-config" ,pkg-config))) (home-page "https://www.optimojoe.com/products/optizelle/") (synopsis "Mathematical optimization library") (description "@code{optizelle} is a software library designed to solve nonlinear optimization problems. Four types of problem are considered: unconstrained, equality constrained, inequality constrained and constrained. Constraints may be applied as values of functions or sets of partial differential equations (PDEs). Solution algorithms such as the preconditioned nonlinear conjugate gradient method, sequential quadratic programming (SQP) and the primal-dual interior-point method are made available. Interfaces are provided for applications written in C++ and Python. Parallel computation is supported via MPI.") (license license:bsd-2))))