| Age | Commit message (Expand) | Author |
|---|
| 2021-12-25 | gnu: linux-libre: Build simplefb into all x86{,_64} kernels....This attempts to mitigate <https://issues.guix.gnu.org/52667>.
It makes linux-libre@5.15 consistent with older versions which do not
support a modular simplefb, allowing a single %base-initrd-modules
simple list for all of them.
Unlike CONFIG_FB_SIMPLE=m, CONFIG_FB_SIMPLE=y conflicts with
CONFIG_DRM_SIMPLEDRM, so the latter is now disabled. Let us hope it is
not missed.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Unset CONFIG_DRM_SIMPLEDRM to build in CONFIG_FB_SIMPLE=y.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Remove "simplefb".
| Tobias Geerinckx-Rice |
| 2021-12-16 | gnu: linux-libre: Support the Coreboot framebuffer....Without this, the kernel cannot write to the display until the
full-featured driver module (often i915) is loaded from the root file
system.
If the root file system is encrypted, the initrd's passphrase prompt
won't make it to the screen, and the fully responsive system will appear
frozen whilst waiting for user input.
* gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Mark simple framebuffers as generic system ones and enable ‘Google’
firmware drivers to enable Coreboot table support and its dependent
framebuffer driver module.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Add the framebuffer_coreboot and simplefb modules on x86 systems.
| Tobias Geerinckx-Rice via Guix-patches via |
| 2021-10-13 | linux-initrd: Support checking NTFS volumes on boot....* gnu/system/linux-initrd.scm (file-system-packages): Add ntfsfix/static
when needed.
| Tobias Geerinckx-Rice |
| 2021-09-23 | linux-initrd: Support XFS....* gnu/system/linux-initrd.scm (file-system-packages):
Add xfs_repair/static when needed.
(file-system-type-modules): Add ‘xfs’ module when needed.
| Tobias Geerinckx-Rice |
| 2021-09-23 | linux-initrd: Include only the single ‘bcachefs’ binary....* gnu/system/linux-initrd.scm (file-system-packages): Substitute
bcachefs/static for bcachefs-tools/static.
| Tobias Geerinckx-Rice |
| 2021-09-23 | gnu: Don't abuse check-btrfs-file-system to scan....It was never guaranteed to be run for non-root file systems. It was for
root file systems only due to a bug now fixed.
* gnu/build/file-systems.scm (check-btrfs-file-system): Don't invoke
‘btrfs device scan’ here.
* gnu/system/linux-initrd.scm (raw-initrd): Do so here if any btrfs file
systems are present.
| Tobias Geerinckx-Rice |
| 2021-07-08 | gnu: %guile-3.0-static-stripped: Rename to %guile-static-stripped....* gnu/packages/make-bootstrap.scm (%guile-3.0-static-stripped): Rename
to %guile-static-stripped.
(%guile-bootstrap-tarball): Adjust accordingly.
* gnu/system/linux-initrd.scm (expression->initrd): Use
%guile-static-stripped as default guile.
* doc/guix.texi (initial RAM disk)[expression->initrd]: Adjust
documentation accordingly.
| Efraim Flashner |
| 2020-12-15 | store-copy: 'populate-store' can optionally deduplicate files....Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
| Ludovic Courtès |
| 2020-12-06 | linux-initrd: Add bcachefs support....* gnu/system/linux-initrd.scm (file-system-packages): Add
bcachefs-tools/static.
(file-system-type-modules): Add an entry for the "bcachefs" type and
module.
| Tobias Geerinckx-Rice |
| 2020-11-26 | mapped-devices: Add 'lvm-device-mapping'....* gnu/system/mapped-devices.scm (lvm-device-mapping, open-lvm-device,
close-lvm-device): New variables.
* gnu/tests/install.scm (%lvm-separate-home-os,
%lvm-separate-home-os-source, %lvm-separate-home-installation-script,
%test-lvm-separate-home-os): New variables.
* gnu/system/linux-initrd.scm (raw-initrd): Add (srfi srfi-1) to initrd expression.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Mikhail Tsykalov |
| 2020-11-26 | mapped-devices: Allow target to be list of strings....* gnu/system/mapped-devices.scm (<mapped-device>): Rename constructor to
%mapped-device.
[target]: Remove field.
[targets]: New field. Adjust users.
(mapped-device-compatibility-helper, mapped-device): New macros.
(mapped-device-target): New deprecated procedure.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Mikhail Tsykalov |
| 2020-08-25 | linux-libre: Support module compression....This commit adds support for GZIP compression for linux-libre kernel
modules. The initrd modules are kept uncompressed as the initrd is already
compressed as a whole.
The linux-libre kernel also supports XZ compression, but as Guix does not have
any available bindings for now, and the compression time is far more
significant, GZIP seems to be a better option.
* gnu/build/linux-modules.scm (modinfo-section-contents): Use
'call-with-gzip-input-port' to read from a module file using '.gz' extension,
(strip-extension): new procedure,
(dot-ko): adapt to support compression,
(ensure-dot-ko): ditto,
(file-name->module-name): ditto,
(find-module-file): ditto,
(load-linux-module*): ditto,
(module-name->file-name/guess): ditto,
(module-name-lookup): ditto,
(write-module-name-database): ditto,
(write-module-alias-database): ditto,
(write-module-device-database): ditto.
* gnu/installer.scm (installer-program): Add "guile-zlib" to the extensions.
* gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto.
* gnu/services.scm (activation-script): Ditto.
* gnu/services/base.scm (default-serial-port): Ditto,
(agetty-shepherd-service): ditto,
(udev-service-type): ditto.
* gnu/system/image.scm (gcrypt-sqlite3&co): Ditto.
* gnu/system/linux-initrd.scm (flat-linux-module-directory): Add "guile-zlib"
to the extensions and make sure that the initrd only contains
uncompressed module files.
* gnu/system/shadow.scm (account-shepherd-service): Add "guile-zlib" to the
extensions.
* guix/profiles.scm (linux-module-database): Ditto.
| Mathieu Othacehe |
| 2020-05-16 | linux-initrd: Silence Guile warnings....Previously, since the switch to Guile 3, we'd see this warning repeated
several times at boot time:
WARNING: …: imported module (guix build utils) overrides core binding `delete'
* gnu/system/linux-initrd.scm (raw-initrd): In gexp, #:hide 'delete'
from (guix build utils). Wrap 'boot-system' in 'parameterize'.
| Ludovic Courtès |
| 2020-05-05 | Merge branch 'master' into core-updates | Marius Bakke |
| 2020-05-03 | linux-initrd: Provide fsck for F2FS....* gnu/system/linux-initrd.scm (file-system-packages): Add F2FS fsck.
| Danny Milosavljevic |
| 2020-05-02 | Merge branch 'master' into core-updates | Marius Bakke |
| 2020-05-02 | linux-initrd: Add initial support for F2FS....* gnu/system/linux-initrd.scm (file-system-type-modules): Add f2fs module.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
| raingloom |
| 2020-05-01 | gnu: linux-initrd: Use Guile 3.0....* gnu/system/linux-initrd.scm (expression->initrd): Change from
%GUILE-STATIC-STRIPPED to %GUILE-3.0-STATIC-STRIPPED.
| Marius Bakke |
