From 156a8810019dd5b8d19f2026be80f199f8e40015 Mon Sep 17 00:00:00 2001 From: Ludovic Courtès Date: Sat, 19 Nov 2022 17:54:26 +0100 Subject: services: base: Use 'match-record' instead of 'match'. * gnu/services/base.scm (agetty-shepherd-service) (mingetty-shepherd-service) (nscd.conf-file) (udev-shepherd-service) (udev-etc) (gpm-shepherd-service) (network-set-up/linux) (network-tear-down/linux) (static-networking-shepherd-service) (greetd-agreety-tty-session-command) (greetd-agreety-tty-xdg-session-command): Use 'match-record' instead of 'match'. (guix-accounts): Use accessors. (udev-service-type): Use accessors. --- gnu/services/base.scm | 922 +++++++++++++++++++++++++------------------------- 1 file changed, 460 insertions(+), 462 deletions(-) (limited to 'gnu/services') diff --git a/gnu/services/base.scm b/gnu/services/base.scm index d99548573d..370696a55e 100644 --- a/gnu/services/base.scm +++ b/gnu/services/base.scm @@ -977,148 +977,148 @@ to use as the tty. This is primarily useful for headless systems." ((device-name _ ...) device-name)))))))) -(define agetty-shepherd-service - (match-lambda - (($ agetty tty term baud-rate auto-login - login-program login-pause? eight-bits? no-reset? remote? flow-control? - host no-issue? init-string no-clear? local-line extract-baud? - skip-login? no-newline? login-options chroot hangup? keep-baud? timeout - detect-case? wait-cr? no-hints? no-hostname? long-hostname? - erase-characters kill-characters chdir delay nice extra-options - shepherd-requirement) - (list - (shepherd-service - (documentation "Run agetty on a tty.") - (provision (list (symbol-append 'term- (string->symbol (or tty "console"))))) - - ;; Since the login prompt shows the host name, wait for the 'host-name' - ;; service to be done. Also wait for udev essentially so that the tty - ;; text is not lost in the middle of kernel messages (see also - ;; mingetty-shepherd-service). - (requirement (cons* 'user-processes 'host-name 'udev - shepherd-requirement)) - - (modules '((ice-9 match) (gnu build linux-boot))) - (start - (with-imported-modules (source-module-closure - '((gnu build linux-boot))) - #~(lambda args - (let ((defaulted-tty #$(or tty (default-serial-port)))) - (apply - (if defaulted-tty - (make-forkexec-constructor - (list #$(file-append util-linux "/sbin/agetty") - #$@extra-options - #$@(if eight-bits? - #~("--8bits") - #~()) - #$@(if no-reset? - #~("--noreset") - #~()) - #$@(if remote? - #~("--remote") - #~()) - #$@(if flow-control? - #~("--flow-control") - #~()) - #$@(if host - #~("--host" #$host) - #~()) - #$@(if no-issue? - #~("--noissue") - #~()) - #$@(if init-string - #~("--init-string" #$init-string) - #~()) - #$@(if no-clear? - #~("--noclear") - #~()) +(define (agetty-shepherd-service config) + (match-record config + (agetty tty term baud-rate auto-login + login-program login-pause? eight-bits? no-reset? remote? flow-control? + host no-issue? init-string no-clear? local-line extract-baud? + skip-login? no-newline? login-options chroot hangup? keep-baud? timeout + detect-case? wait-cr? no-hints? no-hostname? long-hostname? + erase-characters kill-characters chdir delay nice extra-options + shepherd-requirement) + (list + (shepherd-service + (documentation "Run agetty on a tty.") + (provision (list (symbol-append 'term- (string->symbol (or tty "console"))))) + + ;; Since the login prompt shows the host name, wait for the 'host-name' + ;; service to be done. Also wait for udev essentially so that the tty + ;; text is not lost in the middle of kernel messages (see also + ;; mingetty-shepherd-service). + (requirement (cons* 'user-processes 'host-name 'udev + shepherd-requirement)) + + (modules '((ice-9 match) (gnu build linux-boot))) + (start + (with-imported-modules (source-module-closure + '((gnu build linux-boot))) + #~(lambda args + (let ((defaulted-tty #$(or tty (default-serial-port)))) + (apply + (if defaulted-tty + (make-forkexec-constructor + (list #$(file-append util-linux "/sbin/agetty") + #$@extra-options + #$@(if eight-bits? + #~("--8bits") + #~()) + #$@(if no-reset? + #~("--noreset") + #~()) + #$@(if remote? + #~("--remote") + #~()) + #$@(if flow-control? + #~("--flow-control") + #~()) + #$@(if host + #~("--host" #$host) + #~()) + #$@(if no-issue? + #~("--noissue") + #~()) + #$@(if init-string + #~("--init-string" #$init-string) + #~()) + #$@(if no-clear? + #~("--noclear") + #~()) ;;; FIXME This doesn't work as expected. According to agetty(8), if this option ;;; is not passed, then the default is 'auto'. However, in my tests, when that ;;; option is selected, agetty never presents the login prompt, and the ;;; term-ttyS0 service respawns every few seconds. - #$@(if local-line - #~(#$(match local-line - ('auto "--local-line=auto") - ('always "--local-line=always") - ('never "-local-line=never"))) - #~()) - #$@(if tty - #~() - #~("--keep-baud")) - #$@(if extract-baud? - #~("--extract-baud") - #~()) - #$@(if skip-login? - #~("--skip-login") - #~()) - #$@(if no-newline? - #~("--nonewline") - #~()) - #$@(if login-options - #~("--login-options" #$login-options) - #~()) - #$@(if chroot - #~("--chroot" #$chroot) - #~()) - #$@(if hangup? - #~("--hangup") - #~()) - #$@(if keep-baud? - #~("--keep-baud") - #~()) - #$@(if timeout - #~("--timeout" #$(number->string timeout)) - #~()) - #$@(if detect-case? - #~("--detect-case") - #~()) - #$@(if wait-cr? - #~("--wait-cr") - #~()) - #$@(if no-hints? - #~("--nohints?") - #~()) - #$@(if no-hostname? - #~("--nohostname") - #~()) - #$@(if long-hostname? - #~("--long-hostname") - #~()) - #$@(if erase-characters - #~("--erase-chars" #$erase-characters) - #~()) - #$@(if kill-characters - #~("--kill-chars" #$kill-characters) - #~()) - #$@(if chdir - #~("--chdir" #$chdir) - #~()) - #$@(if delay - #~("--delay" #$(number->string delay)) - #~()) - #$@(if nice - #~("--nice" #$(number->string nice)) - #~()) - #$@(if auto-login - (list "--autologin" auto-login) - '()) - #$@(if login-program - #~("--login-program" #$login-program) - #~()) - #$@(if login-pause? - #~("--login-pause") - #~()) - defaulted-tty - #$@(if baud-rate - #~(#$baud-rate) - #~()) - #$@(if term - #~(#$term) - #~()))) - (const #f)) ; never start. - args))))) - (stop #~(make-kill-destructor))))))) + #$@(if local-line + #~(#$(match local-line + ('auto "--local-line=auto") + ('always "--local-line=always") + ('never "-local-line=never"))) + #~()) + #$@(if tty + #~() + #~("--keep-baud")) + #$@(if extract-baud? + #~("--extract-baud") + #~()) + #$@(if skip-login? + #~("--skip-login") + #~()) + #$@(if no-newline? + #~("--nonewline") + #~()) + #$@(if login-options + #~("--login-options" #$login-options) + #~()) + #$@(if chroot + #~("--chroot" #$chroot) + #~()) + #$@(if hangup? + #~("--hangup") + #~()) + #$@(if keep-baud? + #~("--keep-baud") + #~()) + #$@(if timeout + #~("--timeout" #$(number->string timeout)) + #~()) + #$@(if detect-case? + #~("--detect-case") + #~()) + #$@(if wait-cr? + #~("--wait-cr") + #~()) + #$@(if no-hints? + #~("--nohints?") + #~()) + #$@(if no-hostname? + #~("--nohostname") + #~()) + #$@(if long-hostname? + #~("--long-hostname") + #~()) + #$@(if erase-characters + #~("--erase-chars" #$erase-characters) + #~()) + #$@(if kill-characters + #~("--kill-chars" #$kill-characters) + #~()) + #$@(if chdir + #~("--chdir" #$chdir) + #~()) + #$@(if delay + #~("--delay" #$(number->string delay)) + #~()) + #$@(if nice + #~("--nice" #$(number->string nice)) + #~()) + #$@(if auto-login + (list "--autologin" auto-login) + '()) + #$@(if login-program + #~("--login-program" #$login-program) + #~()) + #$@(if login-pause? + #~("--login-pause") + #~()) + defaulted-tty + #$@(if baud-rate + #~(#$baud-rate) + #~()) + #$@(if term + #~(#$term) + #~()))) + (const #f)) ; never start. + args))))) + (stop #~(make-kill-destructor)))))) (define agetty-service-type (service-type (name 'agetty) @@ -1148,42 +1148,42 @@ the tty to run, among other things." (clear-on-logout? mingetty-clear-on-logout? ;Boolean (default #t))) -(define mingetty-shepherd-service - (match-lambda - (($ mingetty tty auto-login login-program - login-pause? clear-on-logout?) - (list - (shepherd-service - (documentation "Run mingetty on an tty.") - (provision (list (symbol-append 'term- (string->symbol tty)))) - - ;; Since the login prompt shows the host name, wait for the 'host-name' - ;; service to be done. Also wait for udev essentially so that the tty - ;; text is not lost in the middle of kernel messages (XXX). - (requirement '(user-processes host-name udev virtual-terminal)) - - (start #~(make-forkexec-constructor - (list #$(file-append mingetty "/sbin/mingetty") - - ;; Avoiding 'vhangup' allows us to avoid 'setfont' - ;; errors down the path where various ioctls get - ;; EIO--see 'hung_up_tty_ioctl' in driver/tty/tty_io.c - ;; in Linux. - "--nohangup" #$tty - - #$@(if clear-on-logout? - #~() - #~("--noclear")) - #$@(if auto-login - #~("--autologin" #$auto-login) - #~()) - #$@(if login-program - #~("--loginprog" #$login-program) - #~()) - #$@(if login-pause? - #~("--loginpause") - #~())))) - (stop #~(make-kill-destructor))))))) +(define (mingetty-shepherd-service config) + (match-record config + (mingetty tty auto-login login-program + login-pause? clear-on-logout?) + (list + (shepherd-service + (documentation "Run mingetty on an tty.") + (provision (list (symbol-append 'term- (string->symbol tty)))) + + ;; Since the login prompt shows the host name, wait for the 'host-name' + ;; service to be done. Also wait for udev essentially so that the tty + ;; text is not lost in the middle of kernel messages (XXX). + (requirement '(user-processes host-name udev virtual-terminal)) + + (start #~(make-forkexec-constructor + (list #$(file-append mingetty "/sbin/mingetty") + + ;; Avoiding 'vhangup' allows us to avoid 'setfont' + ;; errors down the path where various ioctls get + ;; EIO--see 'hung_up_tty_ioctl' in driver/tty/tty_io.c + ;; in Linux. + "--nohangup" #$tty + + #$@(if clear-on-logout? + #~() + #~("--noclear")) + #$@(if auto-login + #~("--autologin" #$auto-login) + #~()) + #$@(if login-program + #~("--loginprog" #$login-program) + #~()) + #$@(if login-pause? + #~("--loginpause") + #~())))) + (stop #~(make-kill-destructor)))))) (define mingetty-service-type (service-type (name 'mingetty) @@ -1260,46 +1260,47 @@ the tty to run, among other things." (define (nscd.conf-file config) "Return the @file{nscd.conf} configuration file for @var{config}, an @code{} object." - (define cache->config - (match-lambda - (($ (= symbol->string database) - positive-ttl negative-ttl size check-files? - persistent? shared? max-size propagate?) - (string-append "\nenable-cache\t" database "\tyes\n" - - "positive-time-to-live\t" database "\t" - (number->string positive-ttl) "\n" - "negative-time-to-live\t" database "\t" - (number->string negative-ttl) "\n" - "suggested-size\t" database "\t" - (number->string size) "\n" - "check-files\t" database "\t" - (if check-files? "yes\n" "no\n") - "persistent\t" database "\t" - (if persistent? "yes\n" "no\n") - "shared\t" database "\t" - (if shared? "yes\n" "no\n") - "max-db-size\t" database "\t" - (number->string max-size) "\n" - "auto-propagate\t" database "\t" - (if propagate? "yes\n" "no\n"))))) - - (match config - (($ log-file debug-level caches) - (plain-file "nscd.conf" - (string-append "\ + (define (cache->config cache) + (match-record cache + (database positive-time-to-live negative-time-to-live + suggested-size check-files? + persistent? shared? max-database-size auto-propagate?) + (let ((database (symbol->string database))) + (string-append "\nenable-cache\t" database "\tyes\n" + + "positive-time-to-live\t" database "\t" + (number->string positive-time-to-live) "\n" + "negative-time-to-live\t" database "\t" + (number->string negative-time-to-live) "\n" + "suggested-size\t" database "\t" + (number->string suggested-size) "\n" + "check-files\t" database "\t" + (if check-files? "yes\n" "no\n") + "persistent\t" database "\t" + (if persistent? "yes\n" "no\n") + "shared\t" database "\t" + (if shared? "yes\n" "no\n") + "max-db-size\t" database "\t" + (number->string max-database-size) "\n" + "auto-propagate\t" database "\t" + (if auto-propagate? "yes\n" "no\n"))))) + + (match-record config + (log-file debug-level caches) + (plain-file "nscd.conf" + (string-append "\ # Configuration of libc's name service cache daemon (nscd).\n\n" - (if log-file - (string-append "logfile\t" log-file) - "") - "\n" - (if debug-level - (string-append "debug-level\t" - (number->string debug-level)) - "") - "\n" - (string-concatenate - (map cache->config caches))))))) + (if log-file + (string-append "logfile\t" log-file) + "") + "\n" + (if debug-level + (string-append "debug-level\t" + (number->string debug-level)) + "") + "\n" + (string-concatenate + (map cache->config caches)))))) (define (nscd-action-procedure nscd config option) ;; XXX: This is duplicated from mcron; factorize. @@ -1797,17 +1798,15 @@ proxy of 'guix-daemon'...~%") (define (guix-accounts config) "Return the user accounts and user groups for CONFIG." - (match config - (($ _ build-group build-accounts) - (cons (user-group - (name build-group) - (system? #t) - - ;; Use a fixed GID so that we can create the store with the right - ;; owner. - (id 30000)) - (guix-build-accounts build-accounts - #:group build-group))))) + (cons (user-group + (name (guix-configuration-build-group config)) + (system? #t) + + ;; Use a fixed GID so that we can create the store with the right + ;; owner. + (id 30000)) + (guix-build-accounts (guix-configuration-build-accounts config) + #:group (guix-configuration-build-group config)))) (define (guix-activation config) "Return the activation gexp for CONFIG." @@ -2130,95 +2129,94 @@ item of @var{packages}." (udev-rule "90-kvm.rules" "KERNEL==\"kvm\", GROUP=\"kvm\", MODE=\"0660\"\n")) -(define udev-shepherd-service +(define (udev-shepherd-service config) ;; Return a for UDEV with RULES. - (match-lambda - (($ udev) - (list - (shepherd-service - (provision '(udev)) - - ;; Udev needs /dev to be a 'devtmpfs' mount so that new device nodes can - ;; be added: see - ;; . - (requirement '(root-file-system)) - - (documentation "Populate the /dev directory, dynamically.") - (start - (with-imported-modules (source-module-closure - '((gnu build linux-boot))) - #~(lambda () - (define udevd - ;; 'udevd' from eudev. - #$(file-append udev "/sbin/udevd")) - - (define (wait-for-udevd) - ;; Wait until someone's listening on udevd's control - ;; socket. - (let ((sock (socket AF_UNIX SOCK_SEQPACKET 0))) - (let try () - (catch 'system-error - (lambda () - (connect sock PF_UNIX "/run/udev/control") - (close-port sock)) - (lambda args - (format #t "waiting for udevd...~%") - (usleep 500000) - (try)))))) - - ;; Allow udev to find the modules. - (setenv "LINUX_MODULE_DIRECTORY" - "/run/booted-system/kernel/lib/modules") - - (let* ((kernel-release - (utsname:release (uname))) - (linux-module-directory - (getenv "LINUX_MODULE_DIRECTORY")) - (directory - (string-append linux-module-directory "/" - kernel-release)) - (old-umask (umask #o022))) - ;; If we're in a container, DIRECTORY might not exist, - ;; for instance because the host runs a different - ;; kernel. In that case, skip it; we'll just miss a few - ;; nodes like /dev/fuse. - (when (file-exists? directory) - (make-static-device-nodes directory)) - (umask old-umask)) - - (let ((pid (fork+exec-command - (list udevd) - #:environment-variables - (cons* - ;; The first one is for udev, the second one for - ;; eudev. - "UDEV_CONFIG_FILE=/etc/udev/udev.conf" - "EUDEV_RULES_DIRECTORY=/etc/udev/rules.d" - (string-append "LINUX_MODULE_DIRECTORY=" - (getenv "LINUX_MODULE_DIRECTORY")) - (default-environment-variables))))) - ;; Wait until udevd is up and running. This appears to - ;; be needed so that the events triggered below are - ;; actually handled. - (wait-for-udevd) - - ;; Trigger device node creation. - (system* #$(file-append udev "/bin/udevadm") - "trigger" "--action=add") - - ;; Wait for things to settle down. - (system* #$(file-append udev "/bin/udevadm") - "settle") - pid)))) - (stop #~(make-kill-destructor)) - - ;; When halting the system, 'udev' is actually killed by - ;; 'user-processes', i.e., before its own 'stop' method was called. - ;; Thus, make sure it is not respawned. - (respawn? #f) - ;; We need additional modules. - (modules `((gnu build linux-boot) ;'make-static-device-nodes' - ,@%default-modules))))))) + (let ((udev (udev-configuration-udev config))) + (list + (shepherd-service + (provision '(udev)) + + ;; Udev needs /dev to be a 'devtmpfs' mount so that new device nodes can + ;; be added: see + ;; . + (requirement '(root-file-system)) + + (documentation "Populate the /dev directory, dynamically.") + (start + (with-imported-modules (source-module-closure + '((gnu build linux-boot))) + #~(lambda () + (define udevd + ;; 'udevd' from eudev. + #$(file-append udev "/sbin/udevd")) + + (define (wait-for-udevd) + ;; Wait until someone's listening on udevd's control + ;; socket. + (let ((sock (socket AF_UNIX SOCK_SEQPACKET 0))) + (let try () + (catch 'system-error + (lambda () + (connect sock PF_UNIX "/run/udev/control") + (close-port sock)) + (lambda args + (format #t "waiting for udevd...~%") + (usleep 500000) + (try)))))) + + ;; Allow udev to find the modules. + (setenv "LINUX_MODULE_DIRECTORY" + "/run/booted-system/kernel/lib/modules") + + (let* ((kernel-release + (utsname:release (uname))) + (linux-module-directory + (getenv "LINUX_MODULE_DIRECTORY")) + (directory + (string-append linux-module-directory "/" + kernel-release)) + (old-umask (umask #o022))) + ;; If we're in a container, DIRECTORY might not exist, + ;; for instance because the host runs a different + ;; kernel. In that case, skip it; we'll just miss a few + ;; nodes like /dev/fuse. + (when (file-exists? directory) + (make-static-device-nodes directory)) + (umask old-umask)) + + (let ((pid (fork+exec-command + (list udevd) + #:environment-variables + (cons* + ;; The first one is for udev, the second one for + ;; eudev. + "UDEV_CONFIG_FILE=/etc/udev/udev.conf" + "EUDEV_RULES_DIRECTORY=/etc/udev/rules.d" + (string-append "LINUX_MODULE_DIRECTORY=" + (getenv "LINUX_MODULE_DIRECTORY")) + (default-environment-variables))))) + ;; Wait until udevd is up and running. This appears to + ;; be needed so that the events triggered below are + ;; actually handled. + (wait-for-udevd) + + ;; Trigger device node creation. + (system* #$(file-append udev "/bin/udevadm") + "trigger" "--action=add") + + ;; Wait for things to settle down. + (system* #$(file-append udev "/bin/udevadm") + "settle") + pid)))) + (stop #~(make-kill-destructor)) + + ;; When halting the system, 'udev' is actually killed by + ;; 'user-processes', i.e., before its own 'stop' method was called. + ;; Thus, make sure it is not respawned. + (respawn? #f) + ;; We need additional modules. + (modules `((gnu build linux-boot) ;'make-static-device-nodes' + ,@%default-modules)))))) (define udev.conf (computed-file "udev.conf" @@ -2226,14 +2224,15 @@ item of @var{packages}." (lambda (port) (format port "udev_rules=\"/etc/udev/rules.d\"~%"))))) -(define udev-etc - (match-lambda - (($ udev rules) - `(("udev" - ,(file-union - "udev" `(("udev.conf" ,udev.conf) - ("rules.d" ,(udev-rules-union (cons* udev kvm-udev-rule - rules)))))))))) +(define (udev-etc config) + (match-record config + (udev rules) + `(("udev" + ,(file-union "udev" + `(("udev.conf" ,udev.conf) + ("rules.d" + ,(udev-rules-union (cons* udev kvm-udev-rule + rules))))))))) (define udev-service-type (service-type (name 'udev) @@ -2243,11 +2242,11 @@ item of @var{packages}." (service-extension etc-service-type udev-etc))) (compose concatenate) ;concatenate the list of rules (extend (lambda (config rules) - (match config - (($ udev initial-rules) - (udev-configuration - (udev udev) - (rules (append initial-rules rules))))))) + (let ((initial-rules + (udev-configuration-rules config))) + (udev-configuration + (inherit config) + (rules (append initial-rules rules)))))) (default-value (udev-configuration)) (description "Run @command{udev}, which populates the @file{/dev} @@ -2385,23 +2384,23 @@ instance." (options gpm-configuration-options ;list of strings (default %default-gpm-options))) -(define gpm-shepherd-service - (match-lambda - (($ gpm options) - (list (shepherd-service - (requirement '(udev)) - (provision '(gpm)) - ;; 'gpm' runs in the background and sets a PID file. - ;; Note that it requires running as "root". - (start #~(make-forkexec-constructor - (list #$(file-append gpm "/sbin/gpm") - #$@options) - #:pid-file "/var/run/gpm.pid" - #:pid-file-timeout 3)) - (stop #~(lambda (_) - ;; Return #f if successfully stopped. - (not (zero? (system* #$(file-append gpm "/sbin/gpm") - "-k")))))))))) +(define (gpm-shepherd-service config) + (match-record config + (gpm options) + (list (shepherd-service + (requirement '(udev)) + (provision '(gpm)) + ;; 'gpm' runs in the background and sets a PID file. + ;; Note that it requires running as "root". + (start #~(make-forkexec-constructor + (list #$(file-append gpm "/sbin/gpm") + #$@options) + #:pid-file "/var/run/gpm.pid" + #:pid-file-timeout 3)) + (stop #~(lambda (_) + ;; Return #f if successfully stopped. + (not (zero? (system* #$(file-append gpm "/sbin/gpm") + "-k"))))))))) (define gpm-service-type (service-type (name 'gpm) @@ -2654,32 +2653,64 @@ to CONFIG." "/servers/socket/2") #f)))) -(define network-set-up/linux - (match-lambda - (($ addresses links routes) - (scheme-file "set-up-network" - (with-extensions (list guile-netlink) - #~(begin - (use-modules (ip addr) (ip link) (ip route)) - - #$@(map (lambda (address) - #~(begin - (addr-add #$(network-address-device address) - #$(network-address-value address) - #:ipv6? - #$(network-address-ipv6? address)) - ;; FIXME: loopback? - (link-set #$(network-address-device address) - #:multicast-on #t - #:up #t))) - addresses) - #$@(map (match-lambda - (($ name type arguments) - #~(link-add #$name #$type - #:type-args '#$arguments))) - links) - #$@(map (lambda (route) - #~(route-add #$(network-route-destination route) +(define (network-set-up/linux config) + (match-record config + (addresses links routes) + (scheme-file "set-up-network" + (with-extensions (list guile-netlink) + #~(begin + (use-modules (ip addr) (ip link) (ip route)) + + #$@(map (lambda (address) + #~(begin + (addr-add #$(network-address-device address) + #$(network-address-value address) + #:ipv6? + #$(network-address-ipv6? address)) + ;; FIXME: loopback? + (link-set #$(network-address-device address) + #:multicast-on #t + #:up #t))) + addresses) + #$@(map (match-lambda + (($ name type arguments) + #~(link-add #$name #$type + #:type-args '#$arguments))) + links) + #$@(map (lambda (route) + #~(route-add #$(network-route-destination route) + #:device + #$(network-route-device route) + #:ipv6? + #$(network-route-ipv6? route) + #:via + #$(network-route-gateway route) + #:src + #$(network-route-source route))) + routes) + #t))))) + +(define (network-tear-down/linux config) + (match-record config + (addresses links routes) + (scheme-file "tear-down-network" + (with-extensions (list guile-netlink) + #~(begin + (use-modules (ip addr) (ip link) (ip route) + (netlink error) + (srfi srfi-34)) + + (define-syntax-rule (false-if-netlink-error exp) + (guard (c ((netlink-error? c) #f)) + exp)) + + ;; Wrap calls in 'false-if-netlink-error' so this + ;; script goes as far as possible undoing the effects + ;; of "set-up-network". + + #$@(map (lambda (route) + #~(false-if-netlink-error + (route-del #$(network-route-destination route) #:device #$(network-route-device route) #:ipv6? @@ -2687,80 +2718,47 @@ to CONFIG." #:via #$(network-route-gateway route) #:src - #$(network-route-source route))) - routes) - #t)))))) - -(define network-tear-down/linux - (match-lambda - (($ addresses links routes) - (scheme-file "tear-down-network" - (with-extensions (list guile-netlink) - #~(begin - (use-modules (ip addr) (ip link) (ip route) - (netlink error) - (srfi srfi-34)) - - (define-syntax-rule (false-if-netlink-error exp) - (guard (c ((netlink-error? c) #f)) - exp)) - - ;; Wrap calls in 'false-if-netlink-error' so this - ;; script goes as far as possible undoing the effects - ;; of "set-up-network". - - #$@(map (lambda (route) - #~(false-if-netlink-error - (route-del #$(network-route-destination route) - #:device - #$(network-route-device route) - #:ipv6? - #$(network-route-ipv6? route) - #:via - #$(network-route-gateway route) - #:src - #$(network-route-source route)))) - routes) - #$@(map (match-lambda - (($ name type arguments) - #~(false-if-netlink-error - (link-del #$name)))) - links) - #$@(map (lambda (address) + #$(network-route-source route)))) + routes) + #$@(map (match-lambda + (($ name type arguments) #~(false-if-netlink-error - (addr-del #$(network-address-device - address) - #$(network-address-value address) - #:ipv6? - #$(network-address-ipv6? address)))) - addresses) - #f)))))) + (link-del #$name)))) + links) + #$@(map (lambda (address) + #~(false-if-netlink-error + (addr-del #$(network-address-device + address) + #$(network-address-value address) + #:ipv6? + #$(network-address-ipv6? address)))) + addresses) + #f))))) (define (static-networking-shepherd-service config) - (match config - (($ addresses links routes - provision requirement name-servers) - (let ((loopback? (and provision (memq 'loopback provision)))) - (shepherd-service + (match-record config + (addresses links routes provision requirement name-servers) + (let ((loopback? (and provision (memq 'loopback provision)))) + (shepherd-service - (documentation - "Bring up the networking interface using a static IP address.") - (requirement requirement) - (provision provision) + (documentation + "Bring up the networking interface using a static IP address.") + (requirement requirement) + (provision provision) - (start #~(lambda _ - ;; Return #t if successfully started. - (load #$(let-system (system target) - (if (string-contains (or target system) "-linux") - (network-set-up/linux config) - (network-set-up/hurd config)))))) - (stop #~(lambda _ - ;; Return #f is successfully stopped. + (start #~(lambda _ + ;; Return #t if successfully started. (load #$(let-system (system target) (if (string-contains (or target system) "-linux") - (network-tear-down/linux config) - (network-tear-down/hurd config)))))) - (respawn? #f)))))) + (network-set-up/linux config) + (network-set-up/hurd config)))))) + (stop #~(lambda _ + ;; Return #f is successfully stopped. + (load #$(let-system (system target) + (if (string-contains (or target system) "-linux") + (network-tear-down/linux config) + (network-tear-down/hurd config)))))) + (respawn? #f))))) (define (static-networking-shepherd-services networks) (map static-networking-shepherd-service networks)) @@ -2873,33 +2871,33 @@ to handle." (extra-env greetd-agreety-extra-env (default '())) (xdg-env? greetd-agreety-xdg-env? (default #t))) -(define greetd-agreety-tty-session-command - (match-lambda - (($ _ command args extra-env) - (program-file - "agreety-tty-session-command" - #~(begin - (use-modules (ice-9 match)) - (for-each (match-lambda ((var . val) (setenv var val))) - (quote (#$@extra-env))) - (apply execl #$command #$command (list #$@args))))))) - -(define greetd-agreety-tty-xdg-session-command - (match-lambda - (($ _ command args extra-env) - (program-file - "agreety-tty-xdg-session-command" - #~(begin - (use-modules (ice-9 match)) - (let* - ((username (getenv "USER")) - (useruid (passwd:uid (getpwuid username))) - (useruid (number->string useruid))) - (setenv "XDG_SESSION_TYPE" "tty") - (setenv "XDG_RUNTIME_DIR" (string-append "/run/user/" useruid))) - (for-each (match-lambda ((var . val) (setenv var val))) - (quote (#$@extra-env))) - (apply execl #$command #$command (list #$@args))))))) +(define (greetd-agreety-tty-session-command config) + (match-record config + (command command-args extra-env) + (program-file + "agreety-tty-session-command" + #~(begin + (use-modules (ice-9 match)) + (for-each (match-lambda ((var . val) (setenv var val))) + (quote (#$@extra-env))) + (apply execl #$command #$command (list #$@command-args)))))) + +(define (greetd-agreety-tty-xdg-session-command config) + (match-record config + (command command-args extra-env) + (program-file + "agreety-tty-xdg-session-command" + #~(begin + (use-modules (ice-9 match)) + (let* + ((username (getenv "USER")) + (useruid (passwd:uid (getpwuid username))) + (useruid (number->string useruid))) + (setenv "XDG_SESSION_TYPE" "tty") + (setenv "XDG_RUNTIME_DIR" (string-append "/run/user/" useruid))) + (for-each (match-lambda ((var . val) (setenv var val))) + (quote (#$@extra-env))) + (apply execl #$command #$command (list #$@command-args)))))) (define-gexp-compiler (greetd-agreety-session-compiler (session ) -- cgit v1.2.3