ontent='noindex, nofollow'/>
aboutsummaryrefslogtreecommitdiff
path: root/m4
AgeCommit message (Expand)Author
2022-01-14gnu: bootstrap: Add support for riscv64-linux....On 7d93b21ab1c132990054372a9677c1639d54e631 gnu: glibc-for-bootstrap: Update patch. Run ./pre-inst-env guix build --target=riscv64-linux-gnu bootstrap-tarballs Producing /gnu/store/4hdzva9i0wyyfbgj1lmqc1wkk644pv07-bootstrap-tarballs-0 With guix hash -rx 1nj0fdgj08bbmfny01mp2blv7c3p2iciqh31zmf04ap5s7ygsqlp * gnu/packages/bootstrap.scm (%bootstrap-executables): Add entries for riscv64-linux. (%bootstrap-guile-hash, %bootstrap-coreutils&co, %bootstrap-binutils, %bootstrap-glibc, %bootstrap-gcc): Add entry for riscv64-linux. (raw-build-guile3): New procedure. (make-raw-bag): Use raw-build-guile3 for riscv64-linux. * guix/packages.scm (%supported-systems): Add riscv64-linux. (%cuirass-supported-systems): Remove riscv64-linux. * guix/utils.scm (target-64bit?): Add riscv64-linux. * m4/guix.m4: Add riscv64-linux as a supported system. * doc/guix.texi (GNU Distribution): Add riscv64-linux. Efraim Flashner
2021-12-14build: Adjust 'courage level' of different systems....* m4/guix.m4 (GUIX_ASSERT_SUPPORTED_SYSTEM): Add i586-gnu. Move powerpc-linux to unsupported but not needing courage. Add mips64el-linux to unsupported. Efraim Flashner
2021-05-23gnu: bootstrap: Add support for powerpc-linux....On 923bb70a1bff657125c3008f119a477e5cb57c2b gnu:glibc-for-bootstrap: Fix patch. Run ./pre-inst-env guix build --target=powerpc-linux-gnu bootstrap-tarballs Producing /gnu/store/dyj1wvayyp1ihaknkxniz1xamcf4yrhl-bootstrap-tarballs-0 With guix hash -rx /gnu/store/dyj1wvayyp1ihaknkxniz1xamcf4yrhl-bootstrap-tarballs-0 02xx2ydj28pwv3vflqffinpq1icj09gzi9icm8j4bwc4lca9irxn * gnu/packages/bootstrap.scm (%bootstrap-executables): Add entries for powerpc-linux. (%bootstrap-guile-hash, %bootstrap-coreutils&co, %bootstrap-binutils, %bootstrap-glibc, %bootstrap-gcc): Add entry for powerpc-linux. * gnu/packages.scm (%supported-systems): Add powerpc-linux. (%hydra-supported-systems): Remove powerpc-linux. * m4/guix.m4: Add powerpc-linux as a supported system. Efraim Flashner
2021-03-23Add powerpc64le-linux as a supported Guix architecture....This makes powerpc64le-linux a supported architecture for Guix, but not for Guix System. * Makefile.am (SUPPORTED_SYSTEMS): Add an entry for powerpc64le-linux. * etc/guix-install.sh (chk_sys_arch): Same. * guix/packages.scm (%supported-systems): Same. * m4/guix.m4 (GUIX_ASSERT_SUPPORTED_SYSTEM): Same. * tests/guix-build.sh (all_systems): Same. Chris Marusich
2021-03-17maint: Check whether Guile-zlib is recent enough....This is a followup to a04aef2430645357d7796969d4b6453478ff8a3f. * m4/guix.m4 (GUIX_CHECK_GUILE_ZLIB): New macro. * configure.ac: Use it when checking for Guile-zlib. Ludovic Courtès
2021-02-04build: Add '--with-channel-commit' and related configure flags....Partially fixes <https://bugs.gnu.org/45896>. * m4/guix.m4 (GUIX_CHANNEL_METADATA): New macro. * configure.ac: Use it. * guix/config.scm.in (%channel-metadata): Adjust accordingly. Ludovic Courtès
2020-12-11maint: Avoid macros obsolete in Autoconf 2.70....* configure.ac: Require Autoconf 2.69. Use 'AS_HELP_STRING' instead of 'AC_HELP_STRING'. * m4/guix.m4: Likewise. * config-daemon.ac: Use 'AC_CONFIG_HEADERS' instead of the singular variant. Ludovic Courtès
2020-10-22git: Require Guile-Git 0.3.0 or later....* guix/git.scm (auth-supported?): Remove. (clone*): Inline code that was dependent on AUTH-SUPPORTED?. (update-cached-checkout): Likewise. (resolve-reference): Remove check for 'object-lookup-prefix' and use it unconditionally. (load-git-submodules): Remove. (update-submodules): Use 'repository-submodules', 'submodule-lookup', etc. unconditionally. (update-cached-checkout): Use 'repository-close!' unconditionally. * m4/guix.m4 (GUIX_CHECK_GUILE_GIT): New macro. * configure.ac: Use it and error out when it fails. * doc/guix.texi (Requirements): Bump to Guile-Git 0.3.0. Ludovic Courtès
2020-09-08Remove (guix json) and require Guile-JSON 4.3.0+....This is a followup to 4071879c86d059ee087c8986915ea72b8c742b72. * guix/json.scm: Remove. * Makefile.am (MODULES): Adjust accordingly. * m4/guix.m4 (GUIX_CHECK_GUILE_JSON): Check for 'define-json-mapping'. * doc/guix.texi (Requirements): Require Guile-JSON 4.3.0+. * guix/ci.scm, guix/cve.scm, guix/import/cpan.scm, guix/import/crate.scm, guix/swh.scm: Remove (guix json) import. * guix/import/gem.scm, guix/import/pypi.scm: Likewise, and import (json). * guix/self.scm (specification->package): Switch to GUILE-JSON-4. * guix/git-download.scm (git-fetch): Likewise. Ludovic Courtès
2020-08-29build: Remove check for Guile 2.2.1 bug....This check is unnecessary since e688c2df3924423b67892cc9939ca099c729d1cb. * m4/guix.m4 (GUIX_ASSERT_SYNTAX_OBJECT_EQUAL): Remove. * configure.ac: Remove user. Ludovic Courtès
2020-08-24Use "guile-zlib" and "guile-lzlib" instead of (guix config)....* Makefile.am (MODULES): Remove guix/zlib.scm and guix/lzlib.scm, (SCM_TESTS): remove tests/zlib.scm, tests/lzlib.scm. * build-aux/build-self.scm (make-config.scm): Remove unused %libz variable. * configure.ac: Remove LIBZ and LIBLZ variables and check instead for Guile-zlib and Guile-lzlib. * doc/guix.texi ("Requirements"): Remove zlib requirement and add Guile-zlib and Guile-lzlib instead. * gnu/packages/package-management.scm (guix)[native-inputs]: Add "guile-zlib" and "guile-lzlib", [inputs]: remove "zlib" and "lzlib", [propagated-inputs]: ditto, [arguments]: add "guile-zlib" and "guile-lzlib" to Guile load path. * guix/config.scm.in (%libz, %liblz): Remove them. * guix/lzlib.scm: Remove it. * guix/man-db.scm: Use (zlib) instead of (guix zlib). * guix/profiles.scm (manual-database): Do not stub (guix config) in imported modules list, instead add "guile-zlib" to the extension list. * guix/scripts/publish.scm: Use (zlib) instead of (guix zlib) and (lzlib) instead of (guix lzlib), (string->compression-type, effective-compression): do not check for zlib and lzlib availability. * guix/scripts/substitute.scm (%compression-methods): Do not check for lzlib availability. * guix/self.scm (specification->package): Add "guile-zlib" and "guile-lzlib" and remove "zlib" and "lzlib", (compiled-guix): remove "zlib" and "lzlib" arguments and add guile-zlib and guile-lzlib to the dependencies, also do not pass "zlib" and "lzlib" to "make-config.scm" procedure, (make-config.scm): remove "zlib" and "lzlib" arguments as well as %libz and %liblz variables. * guix/utils.scm (lzip-port): Use (lzlib) instead of (guix lzlib) and do not check for lzlib availability. * guix/zlib.scm: Remove it. * m4/guix.m4 (GUIX_LIBZ_LIBDIR, GUIX_LIBLZ_FILE_NAME): Remove them. * tests/lzlib.scm: Use (zlib) instead of (guix zlib) and (lzlib) instead of (guix lzlib), and do not check for zlib and lzlib availability. * tests/publish.scm: Ditto. * tests/substitute.scm: Do not check for lzlib availability. * tests/utils.scm: Ditto. * tests/zlib.scm: Remove it. Mathieu Othacehe
2020-07-20ssh: Speed up RPCs by using #:nodelay....Partly fixes <https://bugs.gnu.org/41702>. * guix/ssh.scm (open-ssh-session): Enable #:nodelay. * m4/guix.m4 (GUIX_CHECK_GUILE_SSH): Add feature check for this new parameter. * doc/guix.texi (Requirements): Adjust. Co-authored-by: Ludovic Courtès <ludo@gnu.org> Lars-Dominik Braun
2020-05-28doc: Remove explicit support for mips64el-linux....It's been a good run, but no one is maintaining the architecture. So long, and thanks for all the fish. * doc/guix.texi (GNU Distribution): Change text for mips64el-linux to denote it is deprecated. (Daemon Offload Setup): Change occurrences of mips64el-linux to aarch64-linux and adjust local code snippets. (Guix Environment)[cross-compilation]: Change mips64el-linux-gnu to aarch64-linux-gnu. (GNU Build System)(package-cross-derivation]: Same. (G-Expressions)[cross compilation]: Same. (Additional Build Options)[cross-compilation, build logs]: Same. (qemu-binfmt-service-type): Remove mips64el. * doc/contributing.texi (Submitting Patches): Same. * m4/guix.m4: (GUIX_ASSERT_SUPPORTED_SYSTEM): Remove mips64el-linux. Efraim Flashner
2020-05-28maint: Check whether Guile-Gcrypt is recent enough....Suggested by Danny Milosavljevic <dannym@scratchpost.org> in <https://bugs.gnu.org/41494>. * m4/guix.m4 (GUIX_CHECK_GUILE_GCRYPT): New macro. * configure.ac: Use it. Ludovic Courtès
2020-02-22build: Depend on guile-ssh 0.12.0...This is a followup to 35f35111678e6622301b414f3d464acb71e106bb. * m4/guix.m4 (GUIX_CHECK_GUILE_SSH): Check for userauth-gssapi! * doc/guix.texi: Document version requirement Signed-off-by: Ludovic Courtès <ludo@gnu.org> Lars-Dominik Braun
2019-08-17build: 'GUIX_CHECK_GUILE_JSON' really checks for Guile-JSON 3.x....Until now the 'guile' process would always exit with 0, as long as Guile-JSON is installed, whether it's version 1 or version 3. * m4/guix.m4 (GUIX_CHECK_GUILE_JSON): Fix array syntax and remove catch-all 'match' clause. Ludovic Courtès
2019-07-25maint: Switch to Guile-JSON 3.x....Guile-JSON 3.x is incompatible with Guile-JSON 1.x, which we relied on until now: it maps JSON dictionaries to alists (instead of hash tables), and JSON arrays to vectors (instead of lists). This commit is about adjusting all the existing code to this new mapping. * m4/guix.m4 (GUIX_CHECK_GUILE_JSON): New macro. * configure.ac: Use it. * doc/guix.texi (Requirements): Mention the Guile-JSON version. * guix/git-download.scm (git-fetch)[guile-json]: Use GUILE-JSON-3. * guix/import/cpan.scm (string->license): Expect vectors instead of lists. (module->dist-name): Use 'json-fetch' instead of 'json-fetch-alist'. (cpan-fetch): Likewise. * guix/import/crate.scm (crate-fetch): Likewise, and call 'vector->list' for DEPS. * guix/import/gem.scm (rubygems-fetch): Likewise. * guix/import/json.scm (json-fetch-alist): Remove. * guix/import/pypi.scm (pypi-fetch): Use 'json-fetch' instead of 'json-fetch-alist'. (latest-source-release, latest-wheel-release): Call 'vector->list' on RELEASES. * guix/import/stackage.scm (stackage-lts-info-fetch): Use 'json-fetch' instead of 'json-fetch-alist'. (lts-package-version): Use 'vector->list'. * guix/import/utils.scm (hash-table->alist): Remove. (alist->package): Pass 'vector->list' on the inputs fields, and default to the empty vector. * guix/scripts/import/json.scm (guix-import-json): Remove call to 'hash-table->alist'. * guix/swh.scm (define-json-reader): Expect pair? or null? instead of hash-table?. [extract-field]: Use 'assoc-ref' instead of 'hash-ref'. (json->branches): Use 'map' instead of 'hash-map->list'. (json->checksums): Likewise. (json->directory-entries, origin-visits): Call 'vector->list' on the result of 'json->scm'. * tests/import-utils.scm ("alist->package with dependencies"): New test. * gnu/installer.scm (build-compiled-file)[builder]: Use GUILE-JSON-3. * gnu/installer.scm (installer-program)[installer-builder]: Likewise. * gnu/installer/locale.scm (iso639->iso639-languages): Use 'assoc-ref' instead of 'hash-ref', and pass vectors through 'vector->list'. (iso3166->iso3166-territories): Likewise. * gnu/system/vm.scm (system-docker-image)[build]: Use GUILE-JSON-3. * guix/docker.scm (manifest, config): Adjust for Guile-JSON 3. * guix/scripts/pack.scm (docker-image)[build]: Use GUILE-JSON-3. * guix/import/github.scm (fetch-releases-or-tags): Update docstring. (latest-released-version): Use 'assoc-ref' instead of 'hash-ref'. Pass the result of 'fetch-releases-or-tags' to 'vector->list'. * guix/import/launchpad.scm (latest-released-version): Likewise. Ludovic Courtès
2019-05-06Add (guix lzlib)....* guix/lzlib.scm, tests/lzlib.scm: New files. * Makefile.am (MODULES): Add guix/lzlib.scm. (SCM_TESTS): Add tests/lzlib.scm. * m4/guix.m4 (GUIX_LIBLZ_LIBDIR): New macro. * configure.ac (LIBLZ_LIBDIR): Use it. Define and substitute 'LIBLZ'. * guix/config.scm.in (%liblz): New variable. * guix/self.scm (make-config.scm): Add TODO comment. Co-authored-by: Ludovic Courtès <ludo@gnu.org> Pierre Neidhardt
2018-11-23Update Guile-SQLite3 URL everywhere....* README: Update Guile-SQLite3 URL. * doc/guix.texi (Requirements): Likewise. * guix/store/database.scm (sqlite-exec): Likewise. * m4/guix.m4 (GUIX_CHECK_GUILE_SQLITE3): Likewise. Ludovic Courtès
2018-09-04Switch to Guile-Gcrypt....This removes (guix hash) and (guix pk-crypto), which now live as part of Guile-Gcrypt (version 0.1.0.) * guix/gcrypt.scm, guix/hash.scm, guix/pk-crypto.scm, tests/hash.scm, tests/pk-crypto.scm: Remove. * configure.ac: Test for Guile-Gcrypt. Remove LIBGCRYPT and LIBGCRYPT_LIBDIR assignments. * m4/guix.m4 (GUIX_ASSERT_LIBGCRYPT_USABLE): Remove. * README: Add Guile-Gcrypt to the dependencies; move libgcrypt as "required unless --disable-daemon". * doc/guix.texi (Requirements): Likewise. * gnu/packages/bash.scm, guix/derivations.scm, guix/docker.scm, guix/git.scm, guix/http-client.scm, guix/import/cpan.scm, guix/import/cran.scm, guix/import/crate.scm, guix/import/elpa.scm, guix/import/gnu.scm, guix/import/hackage.scm, guix/import/texlive.scm, guix/import/utils.scm, guix/nar.scm, guix/pki.scm, guix/scripts/archive.scm, guix/scripts/authenticate.scm, guix/scripts/download.scm, guix/scripts/hash.scm, guix/scripts/pack.scm, guix/scripts/publish.scm, guix/scripts/refresh.scm, guix/scripts/substitute.scm, guix/store.scm, guix/store/deduplication.scm, guix/tests.scm, tests/base32.scm, tests/builders.scm, tests/challenge.scm, tests/cpan.scm, tests/crate.scm, tests/derivations.scm, tests/gem.scm, tests/nar.scm, tests/opam.scm, tests/pki.scm, tests/publish.scm, tests/pypi.scm, tests/store-deduplication.scm, tests/store.scm, tests/substitute.scm: Adjust imports. * gnu/system/vm.scm: Likewise. (guile-sqlite3&co): Rename to... (gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT. (expression->derivation-in-linux-vm)[config]: Remove. (iso9660-image)[config]: Remove. (qemu-image)[config]: Remove. (system-docker-image)[config]: Remove. * guix/scripts/pack.scm: Adjust imports. (guile-sqlite3&co): Rename to... (gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT. (self-contained-tarball)[build]: Call 'make-config.scm' without #:libgcrypt argument. (squashfs-image)[libgcrypt]: Remove. [build]: Call 'make-config.scm' without #:libgcrypt. (docker-image)[config, json]: Remove. [build]: Add GUILE-GCRYPT to the extensions Remove (guix config) from the imported modules. * guix/self.scm (specification->package): Remove "libgcrypt", add "guile-gcrypt". (compiled-guix): Remove #:libgcrypt. [guile-gcrypt]: New variable. [dependencies]: Add it. [*core-modules*]: Remove #:libgcrypt from 'make-config.scm' call. Add #:extensions. [*config*]: Remove #:libgcrypt from 'make-config.scm' call. (%dependency-variables): Remove %libgcrypt. (make-config.scm): Remove #:libgcrypt. * build-aux/build-self.scm (guile-gcrypt): New variable. (make-config.scm): Remove #:libgcrypt. (build-program)[fake-gcrypt-hash]: New variable. Add (gcrypt hash) to the imported modules. Adjust load path assignments. * gnu/packages/package-management.scm (guix)[propagated-inputs]: Add GUILE-GCRYPT. [arguments]: In 'wrap-program' phase, add GUILE-GCRYPT to the search path. Ludovic Courtès
2018-06-01build: Check for Guile-SQLite3....* m4/guix.m4 (GUIX_CHECK_GUILE_SQLITE3): New macro. * configure.ac: Use it and define 'HAVE_GUILE_SQLITE3'. * guix/self.scm (specification->package): Add "guile-sqlite3". (compiled-guix)[guile-sqlite3]: New variable. [dependencies]: Add it. Ludovic Courtès
2018-02-26build: Require Guile >= 2.0.13....* README, configure.ac, doc/guix.texi (Requirements): Increase minimum Guile version from 2.0.9 to 2.0.13. * config-daemon.ac: Remove use of 'GUIX_CHECK_UNBUFFERED_CBIP'. * m4/guix.m4 (GUIX_CHECK_UNBUFFERED_CBIP): Remove. * guix/build/download.scm (current-http-proxy): Remove. * guix/build/syscalls.scm (%libc-errno-pointer, errno): Remove. (syscall->procedure): Use #:return-errno unconditionally. * guix/hash.scm (open-sha256-input-port)[unbuffered]: Remove outdated comment. * guix/http-client.scm (when-guile<=2.0.5-or-otherwise-broken): Remove. <top level>: Remove 'when-guile<=2.0.5-or-otherwise-broken' block. * guix/scripts/substitute.scm (fetch): Remove 'guile-version>?' conditional. * tests/hash.scm (supports-unbuffered-cbip?): Remove. <top level>: Remove 'test-skip' call. Ludovic Courtès
2018-01-06build: Detect broken 'equal?' in Guile 2.2.1....Fixes <https://bugs.gnu.org/29903>. Reported by Mathieu Lirzin <mthl@gnu.org>. * m4/guix.m4 (GUIX_ASSERT_SYNTAX_OBJECT_EQUAL): New macro. * configure.ac: Use it. Ludovic Courtès