| Age | Commit message (Expand) | Author |
|---|
| 2022-12-10 | installer: Detect mapped installation devices....Fixes: <https://issues.guix.gnu.org/59823>
* gnu/installer/parted.scm (mapped-device?,
mapped-device-parent-partition): New procedures.
(eligible-devices): Detect mapped installation devices using the new
procedures.
| Mathieu Othacehe |
| 2022-10-31 | installer: parted: Retry failing read-partition-uuid call....Fixes: <https://issues.guix.gnu.org/53541>.
* gnu/installer/parted.scm (read-partition-uuid/retry): New procedure.
(check-user-partitions): Use it.
| Mathieu Othacehe |
| 2022-09-22 | installer: Ensure luks devices are open when mounting partitions....Partially-Fixes: <https://issues.guix.gnu.org/57983>
* gnu/installer/parted.scm (luks-ensure-open): New procedure.
(unmount-user-partitions): Ensure luks devices are open.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-22 | installer: Move <secret> to utils and use it for crypt passwords....* gnu/installer/user.scm (<secret>, secret?, make-secret, secret-content): Move
to utils.scm.
* gnu/installer/utils.scm (<secret>, secret?, make-secret, secret-content):
Moved from user.scm.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Make password a
<secret>.
* gnu/installer/parted.scm (luks-format-and-open): Unwrap secret.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-09-01 | installer: Fix segfault on double logical partition removal....* gnu/installer/parted.scm (auto-partition!): Avoid removing logical
partitions twice.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-08-14 | installer: parted: Don't export WITH-DELAY-DEVICE-IN-USE?....* gnu/installer/parted.scm: Remove WITH-DELAY-DEVICE-IN-USE? from the
module's export list.
| Tobias Geerinckx-Rice |
| 2022-08-08 | installer: Add comments and vertical space to the generated config....* gnu/installer/parted.scm (user-partitions->configuration): Introduce
vertical space and a comment.
* gnu/installer/services.scm (G_): New macro.
(%system-services): Add comment for OpenSSH.
(system-services->configuration): Add vertical space and comments.
* gnu/installer/user.scm (users->configuration): Add comment.
* gnu/installer/steps.scm (format-configuration): Add comment.
(configuration->file): Expound leading comment. Pass #:format-comment
to 'pretty-print-with-comments/splice'.
| Ludovic Courtès |
| 2022-08-05 | installer: parted: Call set-system before set-flags....Parted 3.5 introduces the following regression:
- partition-set-flag sets the BIOS_GRUB flag. The partition type is set to
PARTITION_BIOS_GRUB_GUID.
- partition-set-system resets the partition type to PARTITION_LINUX_DATA_GUID
undoing what's done by partition-set-flag.
To prevent it, reverse the call order.
Fixes: <https://issues.guix.gnu.org/55549>.
* gnu/installer/parted.scm (mkpart): Call partition-set-system before
partition-set-flag.
| Mathieu Othacehe |
| 2022-08-05 | installer: parted: Log partition flags....* gnu/installer/parted.scm (mkpart): Log them.
| Mathieu Othacehe |
| 2022-03-01 | initrd: Use non-hyphenated kernel command-line parameter names....This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
| Maxim Cournoyer |
| 2022-02-02 | installer: Raise condition when mklabel fails....* gnu/installer/parted.scm (mklabel): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use run-command-in-installer in (gnu installer parted)....* gnu/installer/parted.scm (remove-logical-devices,
create-btrfs-file-system, create-ext4-file-system,
create-fat16-file-system, create-fat32-file-system,
create-jfs-file-system, create-ntfs-file-system,
create-xfs-file-system, create-swap-partition, luks-format-and-open,
luks-close): Use run-command-in-installer.
(with-null-output-ports): Remove.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-02-02 | installer: Use new installer-log-line everywhere....* gnu/installer.scm (installer-program)
* gnu/installer/final.scm (install-locale)
* gnu/installer/newt.scm (init)
* gnu/installer/newt/final.scm (run-final-page)
* gnu/installer/newt/page.scm (run-form-with-clients)
* gnu/installer/newt/partition.scm (run-partitioning-page)
* gnu/installer/parted.scm (eligible-devices, mkpart,
luks-format-and-open, luks-close, mount-user-partitions,
umount-user-partitions, free-parted):
* gnu/installer/steps.scm (run-installer-steps):
* gnu/installer/utils.scm (run-command, send-to-clients): Use it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2022-01-14 | installer: Ignore small devices....Filter the devices that are smaller than 2GiB in the device selection list.
* gnu/installer/parted.scm (%min-device-size): New variable.
(non-install-devices): Rename it ...
(eligible-devices): ... this way. Filter the install device as well as the
small devices.
* gnu/installer/newt/partition.scm (run-partitioning-page): Adapt it.
| Mathieu Othacehe |
| 2021-12-10 | Merge remote-tracking branch 'signed/master' into core-updates | Mathieu Othacehe |
| 2021-12-08 | Revert "installer: Make LUKS2 the default format for encrypted devices"...This reverts commit a82e9f45fd9f7c67123b7064c60065281035c744 at the
author's request. We are not quite ready to boot all resulting
systems.
See <https://logs.guix.gnu.org/guix/2021-12-08.log#231815>.
| Tobias Geerinckx-Rice |
| 2021-12-05 | Merge remote-tracking branch 'origin/master' into core-updates-frozen | Ricardo Wurmus |
| 2021-12-01 | installer: parted: Use the swap-space record....* gnu/installer/parted.scm (user-partitions->configuration): Use the
swap-space record.
| Mathieu Othacehe |
| 2021-12-01 | installer: Make LUKS2 the default format for encrypted devices...* gnu/installer/parted.scm (luks-format-and-open): Change it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Josselin Poiret |
| 2021-11-26 | installer: Rework installation device detection....* gnu/installer/parted.scm (installation-device): Remove it.
* gnu/installer/parted.scm (installer-root-partition-path): Add it.
* gnu/installer/parted.scm (non-install-devices): Add installation-device?
predicate.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Josselin Poiret |
| 2021-10-01 | installer: Fix typo in docstrings....* gnu/packages/gnu/installer/parted.scm
(force-user-partitions-formatting, format-user-partitions):
Fix ‘formating’ docstring typo.
| Tobias Geerinckx-Rice |
| 2021-09-23 | installer: Support XFS....* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘xfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘xfs’ mapping.
(create-xfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add xfsprogs.
| Tobias Geerinckx-Rice |
| 2021-08-29 | Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new
'targets' one instead.
* doc/guix-cookbook.texi<target>: Replace by 'targets'.
* gnu/bootloader/grub.scm: Likewise.
* gnu/installer/parted.scm: Likewise.
* gnu/machine/digital-ocean.scm: Likewise.
* gnu/system/examples/asus-c201.tmpl: Likewise
* gnu/system/examples/bare-bones.tmpl: Likewise
* gnu/system/examples/bare-hurd.tmpl: Likewise
* gnu/system/examples/beaglebone-black.tmpl: Likewise
* gnu/system/examples/desktop.tmpl: Likewise
* gnu/system/examples/docker-image.tmpl: Likewise
* gnu/system/examples/lightweight-desktop.tmpl: Likewise
* gnu/system/examples/vm-image.tmpl: Likewise
* gnu/system/examples/yggdrasil.tmpl: Likewise
* gnu/system/hurd.scm: Likewise
* gnu/system/images/hurd.scm: Likewise
* gnu/system/images/novena.scm: Likewise
* gnu/system/images/pine64.scm: Likewise
* gnu/system/images/pinebook-pro.scm: Likewise
* gnu/system/images/rock64.scm: Likewise
* gnu/system/install.scm: Likewise
* gnu/system/vm.scm: Likewise
* gnu/tests.scm: Likewise
* gnu/tests/ganeti.scm: Likewise
* gnu/tests/install.scm: Likewise
* gnu/tests/nfs.scm: Likewise
* gnu/tests/telephony.scm: Likewise
* tests/boot-parameters.scm: Likewise
* tests/system.scm: Likewise
| Maxim Cournoyer |
| 2021-06-17 | installer: Improve the installation device detection method....Fixes: <https://issues.guix.gnu.org/47780>.
* gnu/installer/parted.scm (installation-device): New method.
(non-install-devices): Remove devices which are reported as read-only by
parted or which path is identical to the installation device path returned by
the above method.
| Mathieu Othacehe |
| 2021-06-13 | installer: Fix FAT16 partition mounting....The "fat" file-system mount type doesn't exist in Linux. Trying to mount a
FAT16 partition with "fat" file-system type returns -ENODEV.
Fixes: <https://issues.guix.gnu.org/48419>.
* gnu/installer/parted.scm (user-fs-type->mount-type): Use the "vfat"
file-system for FAT16 partitions.
| Mathieu Othacehe |
| 2021-06-12 | installer: Improve install device detection....* gnu/installer/parted.scm (non-install-devices): Improve the detection by
assuming that any device with the ISO9660 label is the installation device.
| Mathieu Othacehe |
| 2021-06-12 | installer: Check partitions UUIDs....* gnu/installer/parted.scm (&cannot-read-uuid): New condition.
(cannot-read-uuid?, cannot-read-uuid-partition): New procedures.
(check-user-partitions): Check that all user-partitions have a valid UUID,
raide the above condition otherwise.
* gnu/installer/newt/partition.scm (run-disk-page): Run an error page if the
&cannot-read-uuid condition is raised.
| Mathieu Othacehe |
| 2021-04-28 | installer: Add MSDOS disk label support on UEFI systems....Fixes: <https://issues.guix.gnu.org/47889>.
* gnu/installer/parted.scm (esp-partition?): Remove the MSDOS check.
(auto-partition!): On MSDOS disks, check if an ESP partition is present. If
that's the case, do not remove it. Otherwise, if UEFI is supported, create
one.
| Mathieu Othacehe |
| 2020-11-17 | installer: Fix device synchronization....Reported by Florian Pelz:
https://lists.gnu.org/archive/html/guix-devel/2020-11/msg00326.html.
* gnu/installer/utils.scm (call-with-time): New procedure,
(let/time): new macro.
* gnu/installer/parted.scm (with-delay-device-in-use?): Increase the retry
count to 16.
(non-install-devices): Remove the call to with-delay-device-in-use? as it
doesn't return the expected result, and would block much longer now.
(free-parted): Log the time required to sync each device.
| Mathieu Othacehe |
| 2020-11-08 | installer: parted: Add debug output....* gnu/installer/parted.scm (mkpart): Log partition creation.
| Mathieu Othacehe |
| 2020-11-01 | installer: parted: Internationalize the partition handling code....* gnu/installer/parted.scm (user-partition-description): Use 'format'
and 'G_' for i18n.
| Ludovic Courtès |
| 2020-10-30 | installer: Use UUIDs in the 'swap-devices' field....Note: This change requires an updated 'guix' package that contains
Linux-swap support in (gnu build file-systems).
* gnu/installer/parted.scm (user-partitions->configuration): Use UUIDs
in the 'swap-devices' field.
* gnu/installer/newt/final.scm (run-final-page)[wait-for-clients]: New
procedure. Use it.
* gnu/installer/tests.scm (choose-partitioning): Wait for
'starting-final-step' message and move configuration file dialog
handling to...
(conclude-installation): ... here. Send over PORT the reply
corresponding to 'starting-final-step'.
* gnu/tests/install.scm (gui-test-program): When ENCRYPTED? is false,
invoke 'swaplabel' in the marionette.
(installation-target-os-for-gui-tests): When ENCRYPTED? is false, except
a fixed UUID.
| Ludovic Courtès |
| 2020-10-19 | installer: Create bios_grub partition when it is needed....* gnu/installer/parted.scm (auto-partition!): Only check for ESP on EFI
installations.
| Miguel Ángel Arruga Vivas |
| 2020-09-21 | installer: Fix docstring typoes....* gnu/installer/connman.scm (connman-state, run-locale-page)
(start-swapping, stop-swapping, run-installer-steps): Fix typo in
docstring.
| Tobias Geerinckx-Rice |
| 2020-08-06 | installer: Remove logical devices....If a device contains an active logical volume, BLKRRPART will report that the
device is busy. This will cause this device to be filtered by
"non-install-devices" procedure, which is not desired.
Make sure to deactivate all logical volumes before device probing.
Fixes <https://issues.guix.gnu.org/42683>.
* gnu/installer.scm (installer-program): Add lvm2-static to the inputs.
* gnu/installer/parted.scm (remove-logical-devices): New procedure,
(init-parted): call it.
| Mathieu Othacehe |
| 2020-07-26 | installer: Add NTFS support....This adds support for creating and editing NTFS partitions. It is however not
possible yet to create root NTFS partitions, as overlaying on top of a fuse
partition does not seem supported.
* gnu/installer.scm (installer-program): Add "ntfs-3g" to the inputs.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type,
partition-filesystem-user-type, create-ntfs-file-system,
format-user-partitions): Add NTFS support.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add NTFS support.
| Mathieu Othacehe |
| 2020-02-22 | installer: Log important bits to syslog....* gnu/installer.scm (installer-program): Log crashes with 'syslog'.
* gnu/installer/parted.scm (luks-format-and-open, luks-close)
(mount-user-partitions, umount-user-partitions): Add 'syslog' calls.
* gnu/installer/steps.scm (run-installer-steps): Log the running step
with 'syslog'.
* gnu/installer/utils.scm (run-shell-command): Add calls to 'syslog'.
| Ludovic Courtès |
| 2020-01-05 | installer: Add JFS support....* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘jfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘jfs’ mapping
(create-jfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add jfsutils.
| Tobias Geerinckx-Rice |
| 2020-01-05 | installer: Fix typo....* gnu/installer/parted.scm (create-btrfs-file-system): Fix typo in docstring.
| Tobias Geerinckx-Rice |
| 2019-09-25 | installer: Update to Guile-Parted 0.0.2 release....* gnu/installer/parted.scm (data-partition?, metadata-partition?,
freespace-partition?, normal-partition?, extended-partition?,
logical-partition?): Remove, as now provided by Guile-Parted.
* gnu/installer/newt/partition.scm (run-disk-page): Remove disk-destroy calls,
replace disk-delete-all by disk-remove-all-partitions and
disk-delete-partition by disk-remove-partition*.
| Mathieu Othacehe |
| 2019-06-05 | installer: Always add '%base-initrd-modules' to 'initrd-modules'....Fixes <https://bugs.gnu.org/36099>.
Reported by Jonathan Brielmaier <jonathan.brielmaier@web.de>.
* gnu/installer/parted.scm (initrd-configuration): Add
%BASE-INITRD-MODULES to the 'initrd-modules' field.
| Ludovic Courtès |
| 2019-05-19 | installer: Fix Guile-Parted crash on i686....Fixes <https://bugs.gnu.org/35783>.
This is a followup to 7d567af46b4e10ffafb1d0f76b524f5781460598.
* gnu/installer/parted.scm (auto-partition!): Append ESP-PARTITION, when
it is true, to the result of 'create-adjacent-partitions!'.
* gnu/installer/newt/partition.scm (run-partioning-page): Remove
'initial-partitions' variable, and remove call to
'create-special-user-partitions'.
Co-authored-by: Mathieu Othacehe <m.othacehe@gmail.com>
| Ludovic Courtès |
| 2019-05-15 | installer: Rename 'auto-partition' to 'auto-partition!'....This is a followup to 7d567af46b4e10ffafb1d0f76b524f5781460598.
* gnu/installer/parted.scm (create-adjacent-partitions): Rename to...
(create-adjacent-partitions!): ... this. Make private.
(auto-partition): Rename to...
(auto-partition!): ... this.
* gnu/installer/newt/partition.scm (run-partioning-page): Adjust
accordingly.
| Ludovic Courtès |
| 2019-05-14 | installer: Fix docstring....* gnu/installer/parted.scm (create-fat32-file-system): Fix docstring.
| Danny Milosavljevic |
| 2019-05-14 | installer: Add fat16....* gnu/installer/parted.scm (user-fs-type-name): Add fat16.
(user-fs-type->mount-type): Add fat16.
(create-fat16-file-system): New procedure.
(format-user-partitions): Use it.
| Danny Milosavljevic |
| 2019-05-14 | installer: Create btrfs file system....Fixes <https://bugs.gnu.org/35655>.
* gnu/installer/parted.scm (create-btrfs-file-system): New procedure.
(format-user-partitions): Use it.
| Danny Milosavljevic |
| 2019-03-27 | installer: Produce an 'initrd-modules' field if needed....* gnu/installer/parted.scm (root-user-partition?): New procedure.
(bootloader-configuration): Use it.
(user-partition-missing-modules, initrd-configuration): New procedures.
(user-partitions->configuration): Call 'initrd-configuration'.o
* gnu/installer.scm (not-config?): Rename to...
(module-to-import?): ... this. Add cases to exclude non-installer and
non-build (gnu …) modules.
(installer-program)[installer-builder]: Add GUIX to the extension list.
| Ludovic Courtès |
| 2019-03-27 | installer: Emit 'bootloader' field before 'swap-devices'....* gnu/installer/parted.scm (user-partitions->configuration): Move
'bootloader' section above 'swap-devices'.
| Ludovic Courtès |
| 2019-03-25 | installer: Set the system's 'keyboard-layout' field....* gnu/installer/newt/keymap.scm (keyboard-layout->configuration): New
procedure.
* gnu/installer.scm (compute-keymap-step): Return RESULT.
(installer-steps) <'keymap>: Add 'configuration-formatter' field.
(installer-program): Use (gnu installer newt keymap).
* gnu/installer/parted.scm (bootloader-configuration): Set
'keyboard-layout'.
| Ludovic Courtès |
