| Age | Commit message (Expand) | Author |
|---|
| 2022-03-18 | guix home: Implement the 'extension-graph' and 'shepherd-graph' actions....Until now these two actions were silently ignored.
* guix/scripts/home.scm (show-help, %options): Add "--graph-backend".
(%default-options): Add 'graph-backend' key.
(export-extension-graph, export-shepherd-graph): New procedures.
(perform-action): Add #:graph-backend parameter. Add cases for the
'extension-graph' and 'shepherd-graph' actions.
(process-action): Pass #:graph-backend to 'perform-action'.
* guix/scripts/system.scm (service-node-type)
(shepherd-service-node-type): Export
* tests/guix-home.sh: Add tests.
* doc/guix.texi (Invoking guix home): Document it.
| Ludovic Courtès |
| 2022-03-16 | system: Improve 'read-boot-parameters' incompatibility diagnostic....Previously, when reading an incompatible "parameters" file, 'guix
system' would print a warning and then crash with a wrong-type-arg
backtrace because code expects 'read-boot-parameters' to always return a
<boot-parameters> record.
* gnu/system.scm (read-boot-parameters): Upon incompatibility, raise an
error instead of returning #f. Also raise a '&fix-hint' condition.
* tests/boot-parameters.scm ("read, construction, mandatory fields"):
Define 'test-read-boot-parameters' as a macro; expect
'formatted-message?' exceptions rather than #f returns.
| Ludovic Courtès |
| 2022-03-16 | packages: 'modify-inputs' preserves outputs in 'replace' clauses....Fixes <https://issues.guix.gnu.org/53915>.
Reported by Gordon Quad <gordon@niflheim.info>.
* guix/packages.scm (replace-input): Preserve the outputs of INPUT by
default.
* tests/packages.scm ("modify-inputs, replace, extra output"): New test.
| Ludovic Courtès |
| 2022-03-16 | tests: Exercise 'modify-inputs' with a 'replace' clause....* tests/packages.scm ("modify-inputs, replace")
("modify-inputs, replace, change output"): New tests.
| Ludovic Courtès |
| 2022-03-13 | gexp: Correctly handle #$output in 'gexp->approximate-sexp'....This addresses the following backtrace from
"guix lint -c wrapper-inputs hostapd":
Backtrace:ostapd@2.10 [wrapper-inputs]...
[...]
174:9 3 (gexp->approximate-sexp #<gexp (modify-phases %standard?>)
In srfi/srfi-1.scm:
586:17 2 (map1 (#<gexp-output out> #<gexp-input "pkg-config":o?>))
In guix/gexp.scm:
175:16 1 (_ _)
In ice-9/boot-9.scm:
1685:16 0 (raise-exception _ #:continuable? _)
ice-9/boot-9.scm:1685:16: In procedure raise-exception:
Throw to key `match-error' with args `("match" "no matching pattern" #<gexp-output out>)'.
* guix/gexp.scm (gexp->approximate-sexp): Handle the case where 'reference' is
a <gexp-output>,, by returning (*approximate*).
* tests/gexp.scm ("gexp->approximate-sexp, outputs"): Test it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Maxime Devos |
| 2022-03-13 | gexp: Correctly handle unquoting S-exp objects....This fixes a false-positive in the linter:
guix lint -c 'wrapper-inputs' libaio
* guix/gexp.scm (gexp->approximate-sexp): Allow the 'thing' in <gexp-input> to
be a sexp, without approximation, by testing if it is a record.
* tests/gexp.scm ("unquoted sexp (not a gexp!)"): Test it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
| Maxime Devos |
| 2022-03-11 | lint: check-tests-true: Allow #:tests? #t for some build systems....emacs-build-system sets #:tests? #f by default, so the linter shouldn't warn
if #:tests? #t is set for packages using emacs-build-system. Likewise for
texlive-build-system.
* guix/lint.scm (check-tests-true): Do not warn if the build system
is emacs-build-system or texlive-build-system.
* tests/lint.scm
("tests-true: #:tests? #t acceptable for emacs packages")
("tests-true: #:tests? #t acceptable for texlive packages"): New tests.
Fixes: <https://issues.guix.gnu.org/50299>
Reported-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
| Maxime Devos |
| 2022-03-10 | tests: Check 'guix home reconfigure' for a second generation....* tests/guix-home.sh: Invoke "guix home reconfigure" a second time with
a modify config file and check the result.
| Ludovic Courtès |
| 2022-03-10 | tests: Simplify use of 'local-file' in 'tests/guix-home.sh'....* tests/guix-home.sh: Remove 'current-filename' trickery since
'local-file' resolves file names relative to the containing file.
| Ludovic Courtès |
| 2022-03-10 | tests: Make sure 'guix home reconfigure' backs up files....* tests/guix-home.sh: Create ~/.bashrc and ~/.config/test.conf prior to
'reconfigure' and check whether they were backed up.
| Ludovic Courtès |
| 2022-03-07 | derivations: Coalesce inputs that have the same output path....Fixes <https://issues.guix.gnu.org/54209>.
* guix/derivations.scm (coalesce-duplicate-inputs): Use the output paths
of DRV as a hash table key.
* tests/derivations.scm ("derivation with duplicate fixed-output
inputs"): Expect a single input for FINAL.
("derivation with equivalent fixed-output inputs"): New test.
| Ludovic Courtès |
| 2022-03-07 | tests: Adjust to (guix import github) changes....This is a followup to a8d3033da61958c53c44dd5db90672bfc4533ef9.
* tests/import-github.scm (call-with-releases): Mock
'open-connection-for-uri'.
| Ludovic Courtès |
| 2022-03-06 | tests: Add (guix http-client) tests....* tests/http-client.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* .dir-locals.el (scheme-mode): Add 'with-http-server'.
| Ludovic Courtès |
| 2022-03-01 | system: Add a version field to the <boot-parameters> record....This version field exposes the (already present) version information of a boot
parameters file.
* gnu/system.scm (%boot-parameters-version): New variable.
(<boot-parameters>)[version]: New field.
(read-boot-parameters): Use it.
(operating-system-boot-parameters-file): Likewise.
* tests/boot-parameters.scm (test-read-boot-parameters): Use
%boot-parameters-version as the default version value in the template.
| Maxim Cournoyer |
| 2022-02-18 | guix build: Warn when attempting to build an unsupported package....Fixes <https://issues.guix.gnu.org/51801>.
Reported by Maxim Cournoyer <maxim.cournoyer@gmail.com>.
* guix/scripts/build.scm (options->derivations)[warn-if-unsupported]:
New procedure.
[compute-derivation]: Use it.
* tests/guix-build.sh: Add test.
| Ludovic Courtès |
| 2022-02-18 | profiles: 'profile-derivation' rejects unsupported packages....Previously user-facing commands would happily start building packages
even if they do not support that system. With this change, all the
user-facing commands reject unsupported packages without going further.
* guix/profiles.scm (profile-derivation): Add #:allow-unsupported-packages?.
Define 'check-supported-packages' and honor #:allow-unsupported-packages?.
* tests/guix-pack.sh, tests/guix-package.sh, tests/guix-shell.sh: Ensure
that unsupported packages are rejected.
* tests/guix-system.sh: Pass "--system=armhf-linux" when attempting to
build gnu/system/examples/asus-c201.tmpl.
| Ludovic Courtès |
| 2022-02-18 | packages: 'package-transitive-supported-systems' ignores '%current-target-sys......Previously 'package-transitive-supported-systems' would enter an
infinite loop over the cross-compilation tool chain if
%CURRENT-TARGET-SYSTEM was set.
* guix/packages.scm (package-transitive-supported-systems)[supported-systems-procedure]:
Pass explicit SYSTEM and TARGET parameters.
* tests/packages.scm ("supported-package? vs. %current-target-system"):
New test.
| Ludovic Courtès |
| 2022-02-16 | gexp: Preserve source location for #~ and #$ read extensions....Read hash extensions preserve source location info as source properties
on their result. However, in Guile 3.0.8, that location would be
dismissed, leading 'local-file' to fail to resolve file names relative
to the source directory.
Fixes <https://issues.guix.gnu.org/54003>.
Reported by Aleksandr Vityazev <avityazev@posteo.org>.
* guix/gexp.scm <eval-when> [read-syntax-redefined?, read-procedure]
[read-syntax*]: New variables.
[read-ungexp]: Adjust to expect either sexps or syntax objects.
[read-gexp]: Call 'read-procedure'.
* tests/gexp.scm ("local-file, relative file name, within gexp")
("local-file, relative file name, within gexp, compiled"): New tests.
| Ludovic Courtès |
| 2022-02-15 | gexp: 'computed-file' always uses a native Guile....Fixes a regression whereby, when cross-compiling, 'computed-file' would
use a cross-compiled Guile as its builder, which would fail to run.
Regression introduced in af57d1bf6c46f47d82dbc234dde1e16fa8634e9d (the
problem had always been there but was hidden before behind the (not guile)
condition.)
* guix/gexp.scm (computed-file-compiler): For 'guile', pass #:target #f.
* tests/gexp.scm ("lower-object, computed-file, #:target"): New test.
| Ludovic Courtès |
| 2022-02-14 | publish: Do not sign the URL/Compression/FileSize narinfo fields....This will allow mirror operators to alter these non-normative bits of a
narinfo without having to resign narinfos.
* guix/scripts/publish.scm (narinfo-string): Remove
URL/Compression/FileSize from BASE-INFO. Move them after "Signature".
* tests/publish.scm ("/*.narinfo")
("/*.narinfo with properly encoded '+' sign")
("/*.narinfo with lzip + gzip")
("with cache, lzip + gzip"): Adjust accordingly.
* tests/substitute.scm ("query narinfo with signature over relevant subset"):
New test.
| Ludovic Courtès |
| 2022-02-14 | git-authenticate: Ensure the target is a descendant of the introductory commit....Fixes a bug whereby authentication of a commit *not* descending from the
introductory commit could succeed, provided the commit verifies the
authorization invariant.
In the example below, A is a common ancestor of the introductory commit
I and of commit X. Authentication of X would succeed, even though it is
not a descendant of I, as long as X is authorized according to the
'.guix-authorizations' in A:
X I
\ /
A
This is because, 'authenticate-repository' would not check whether X
descends from I, and the call (commit-difference X I) would return X.
In practice that only affects forks because it means that ancestors of
the introductory commit already contain a '.guix-authorizations' file.
* guix/git-authenticate.scm (authenticate-repository): Add call to
'commit-descendant?'.
* tests/channels.scm ("authenticate-channel, not a descendant of introductory commit"):
New test.
* tests/git-authenticate.scm ("authenticate-repository, target not a descendant of intro"):
New test.
* tests/guix-git-authenticate.sh: Expect earlier test to fail since
9549f0283a78fe36f2d4ff2a04ef8ad6b0c02604 is not a descendant of
$intro_commit. Add new test targeting an ancestor of the introductory
commit, and another test targeting the v1.2.0 commit.
* doc/guix.texi (Specifying Channel Authorizations): Add a sentence.
| Ludovic Courtès |
| 2022-02-14 | git: Add 'commit-descendant?'....* guix/git.scm (commit-descendant?): New procedure.
* tests/git.scm ("commit-descendant?"): New test.
| Ludovic Courtès |
| 2022-02-14 | git-authenticate: Test introductory commit signature verification....These tests mimic similar tests already in 'tests/channels.scm', but
without using the higher-level 'authenticate-channel'.
* tests/git-authenticate.scm ("introductory commit, valid signature")
("introductory commit, missing signature")
("introductory commit, wrong signature"): New tests.
| Ludovic Courtès |
| 2022-02-11 | tests: Adjust pypi test to recent changes....This is a followup to 00762a4c4c8ecdd71cccf6afdd87ae68bf9b4964.
* tests/pypi.scm ("pypi->guix-package, no wheel"): Guard against
'error?' instead of 'quit'.
| Ludovic Courtès |
| 2022-02-11 | tests: Pass #:guile to 'computed-file' & co....Fixes a regression introduced in
af57d1bf6c46f47d82dbc234dde1e16fa8634e9d whereby tests would end up
building the world.
* guix/gexp.scm (mixed-text-file): Add #:guile parameter and honor it.
* tests/gexp.scm ("mixed-text-file"): Pass #:guile to 'mixed-text-file'.
("file-union"): Pass #:guile to 'file-union'.
("lower-object, computed-file"): Pass #:guile to 'computed-file'.
("lower-object, computed-file + grafts"): Likewise.
* tests/packages.scm ("origin->derivation, single file with snippet"):
Likewise.
* tests/profiles.scm ("profile-derivation, ordering & collisions"):
Likewise.
* guix/tests.scm (test-file): Likewise.
| Ludovic Courtès |
| 2022-02-05 | tests: Assert that cyclic graphs can be produced....* tests/graph.scm ("package DAG, oops it was a cycle"): New test.
| Liliana Marie Prikler |
