| Age | Commit message (Expand) | Author |
|---|
| 2022-10-22 | Remove now unnecessary uses of (guix grafts)....These modules would use (guix grafts) just to access '%graft?' and
related bindings, which are now in (guix store).
* gnu/ci.scm,
guix/gexp.scm,
guix/lint.scm,
guix/scripts.scm,
guix/scripts/archive.scm,
guix/scripts/build.scm,
guix/scripts/challenge.scm,
guix/scripts/deploy.scm,
guix/scripts/environment.scm,
guix/scripts/home.scm,
guix/scripts/pack.scm,
guix/scripts/package.scm,
guix/scripts/pull.scm,
guix/scripts/size.scm,
guix/scripts/system.scm,
guix/scripts/weather.scm,
tests/builders.scm,
tests/channels.scm,
tests/cpan.scm,
tests/derivations.scm,
tests/gexp.scm,
tests/graph.scm,
tests/guix-daemon.sh,
tests/monads.scm,
tests/pack.scm,
tests/packages.scm,
tests/profiles.scm,
tests/system.scm: Remove #:use-module (guix grafts).
| Ludovic Courtès |
| 2021-09-17 | tests: Add missing module import....This is a follow-up to commit 9bea983e4f5a1c07737336163bc6835f6c582a6e.
* tests/builders.scm: Import (guix grafts).
| Marius Bakke |
| 2021-09-07 | tests: Disable grafts in 'tests/builders.scm'....This is required since the introduction of the OpenSSL graft in the
parent commit so that calling 'package-derivation' in the Python tests
would not trigger a build.
* tests/builders.scm <top level>: Add '%graft?' call.
| Ludovic Courtès |
| 2021-07-05 | tests: Adjust Python "sanity" check tests....This is a followup to 09448c0994390697e876db235a3b773311795238.
The 'check-build-failure' procedure would not actually check anything
since it did not call 'build-derivations'. However, it was throwing an
exception for unrelated reasons, so the tests would pass.
* tests/builders.scm (check-build-failure): Use 'guard' instead of
'false-if-exception'. Call 'build-derivations' to actually check for
build failures.
| Ludovic Courtès |
| 2021-03-30 | build-system: Rewrite using gexps....* guix/packages.scm (expand-input): Remove 'store', 'system', and
'cross-system' parameters; add #:native?. Rewrite to return
name/gexp-input tuples.
(bag->derivation): Adjust accordingly. Lower (bag-build bag).
(bag->cross-derivation): Ditto. Instead of #:native-drvs and
#:target-drvs, pass #:build-inputs, #:host-inputs, and #:target-inputs.
(%derivation-cache): Remove.
* gnu/packages/bootstrap.scm (raw-build): Turn into a monadic procedure.
* gnu/packages/commencement.scm (glibc-final)[arguments]: Use
'gexp-input' for the #:allowed-references argument.
* guix/build-system/cmake.scm (cmake-build): Remove 'store' parameter.
Switch to the use of gexps and 'gexp->derivation'.
(lower): Remove #:source from 'private-keywords'.
* guix/build-system/glib-or-gtk.scm (glib-or-gtk-build, lower):
Likewise.
* guix/build-system/font.scm (font-build): Likewise.
* guix/build-system/gnu.scm (gnu-build): Likewise, and remove
'canonicalize-reference'.
(gnu-cross-build): Likewise, and expect #:build-inputs, #:host-inputs,
and #:target-inputs instead of #:native-drvs and #:target-drvs.
(lower): Likewise.
* guix/build-system/perl.scm (perl-build, lower): Likewise.
* guix/build-system/python.scm (python-build, lower): Likewise.
* guix/build-system/ruby.scm (ruby-build, lower): Likewise.
* guix/build-system/waf.scm (waf-build, lower): Likewise.
* guix/build-system/trivial.scm (guile-for-build): Remove.
(trivial-build): Remove 'store' parameter, change to gexps.
(trivial-cross-build): Ditto, and change to #:build-inputs & co.
* guix/build-system/cargo.scm (cargo-build): Change to 'gexp->derivation'.
* guix/build-system/copy.scm (copy-build): Likewise.
* guix/build-system/dune.scm (dune-build): Likewise.
* guix/build-system/guile.scm (guile-build, guile-cross-build):
Likewise.
* guix/build-system/meson.scm (meson-build): Likewise.
* guix/build-system/ocaml.scm (ocaml-build): Likewise.
* guix/build-system/scons.scm (scons-build): Likewise.
* guix/build-system/texlive.scm (texlive-build): Likewise.
* guix/build-system/android-ndk.scm (android-ndk-build): Likewise.
* guix/build-system/ant.scm (ant-build): Likewise.
* guix/build-system/asdf.scm (asdf-build/source, asdf-build): Likewise.
* guix/build-system/chicken.scm (chicken-build): Likewise.
* guix/build-system/clojure.scm (clojure-build): Likewise.
(source->output-path, maybe-guile->guile): Remove.
* guix/build-system/dub.scm (dub-build): Likewise.
* guix/build-system/emacs.scm (emacs-build): Likewise.
* guix/build-system/go.scm (go-build): Likewise.
* guix/build-system/haskell.scm (haskell-build): Likewise.
* guix/build-system/julia.scm (julia-build): Likewise.
* guix/build-system/linux-module.scm (linux-module-build)
(linux-module-build-cross): Likewise.
* guix/build-system/maven.scm (maven-build): Likewise.
* guix/build-system/minify.scm (minify-build): Likewise.
* guix/build-system/node.scm (node-build): Likewise.
* guix/build-system/qt.scm (qt-build, qt-cross-build): Likewise.
* guix/build-system/r.scm (r-build): Likewise.
* guix/build-system/rakudo.scm (rakudo-build): Likewise.
* guix/build-system/renpy.scm (renpy-build): Likewise.
* tests/builders.scm ("gnu-build"): Call 'store-lower' on 'gnu-build'.
Pass #:source parameter.
* tests/packages.scm ("search paths"): Use 'abort-to-prompt' instead of
a normal return from the 'build' method.
("package->bag, sensitivity to %current-target-system"): Change 'build'
to match the new build system signature.
squash! build-system: Rewrite using gexps.
squash! build-system: Rewrite using gexps.
| Ludovic Courtès |
| 2021-02-01 | build/python: Add a sanity check phase....Add a new phase validating the usability of installed Python packages.
* gnu/packages/aux-files/python/sanity-check.py: New file.
* Makefile.am (AUX_FILES): Register it.
* guix/build-system/python.scm (sanity-check.py): New variable.
(lower): Add the script as an implicit input.
* guix/build/python-build-system.scm: Remove trailing #t.
(sanity-check): New phase.
(%standard-phases): Use it.
* tests/builders.scm: (make-python-dummy)
(dummy-ok, dummy-dummy-nosetuptools, dummy-fail-requirements)
(dummy-fail-import, dummy-fail-console-script): New variables.
("python-build-system: dummy-ok")
("python-build-system: dummy-dummy-nosetuptools")
("python-build-system: dummy-fail-requirements")
("python-build-system: dummy-fail-import")
("python-build-system: dummy-fail-console-script"): Add tests.
| Lars-Dominik Braun |
| 2021-01-26 | build-systems/gnu: Allow unpacking/repacking more kind of files....Before this change, only plain directories, tar or zip archives were supported
as the source of a package for the GNU build system; anything else would cause
the unpack phase to fail. Origins relying on snippets would suffer from the
same problem.
This change adds the support to use files of the following extensions: .gz,
.Z, .bz2, .lz, and .xz, even when they are not tarballs. Files of unknown
extensions are treated as uncompressed files and supported as well.
* guix/packages.scm (patch-and-repack): Only add the compressor utility to the
PATH when the file is compressed. Bind more inputs in the mlet, and use them
for decompressing single files. Adjust the decompression and compression
routines.
[decompression-type]: Remove nested variable.
* guix/build/utils.scm (compressor, tarball?): New procedures. Move
%xz-parallel-args to the new 'compression helpers' section.
* tests/packages.scm: Add tests. Add missing copyright year for Jan.
* guix/build/gnu-build-system.scm (first-subdirectory): Return #f when no
sub-directory was found.
(unpack): Support more file types, including uncompressed plain files.
| Maxim Cournoyer |
| 2019-06-14 | tests: Remove expensive and pointless test....This test had become too expensive since the introduction of the reduced
bootstrap.
* tests/builders.scm ("gnu-build"): Remove.
(%bootstrap-inputs, %bootstrap-search-paths): Remove.
| Ludovic Courtès |
| 2018-09-22 | bootstrap: %bootstrap-inputs: Wrap input lists into thunks....* gnu/packages/bootstrap.scm (%bootstrap-inputs): Change to procedure. Update
users; prepares for Mes bootstrap.
* gnu/packages/commencement.scm (%boot0-inputs, %boot1-inputs, %boot2-inputs,
%boot3-inputs, %boot4-inputs, %boot5-inputs, %boot-6-inputs): Change to
procedure. Update users.
* tests/builders.scm (%bootstrap-inputs, %bootstrap-search-paths): Make a
procedure, filter on package?. Update users.
| Jan Nieuwenhuizen |
| 2018-09-04 | Switch to Guile-Gcrypt....This removes (guix hash) and (guix pk-crypto), which now live as part of
Guile-Gcrypt (version 0.1.0.)
* guix/gcrypt.scm, guix/hash.scm, guix/pk-crypto.scm,
tests/hash.scm, tests/pk-crypto.scm: Remove.
* configure.ac: Test for Guile-Gcrypt. Remove LIBGCRYPT and
LIBGCRYPT_LIBDIR assignments.
* m4/guix.m4 (GUIX_ASSERT_LIBGCRYPT_USABLE): Remove.
* README: Add Guile-Gcrypt to the dependencies; move libgcrypt as
"required unless --disable-daemon".
* doc/guix.texi (Requirements): Likewise.
* gnu/packages/bash.scm, guix/derivations.scm, guix/docker.scm,
guix/git.scm, guix/http-client.scm, guix/import/cpan.scm,
guix/import/cran.scm, guix/import/crate.scm, guix/import/elpa.scm,
guix/import/gnu.scm, guix/import/hackage.scm,
guix/import/texlive.scm, guix/import/utils.scm, guix/nar.scm,
guix/pki.scm, guix/scripts/archive.scm,
guix/scripts/authenticate.scm, guix/scripts/download.scm,
guix/scripts/hash.scm, guix/scripts/pack.scm,
guix/scripts/publish.scm, guix/scripts/refresh.scm,
guix/scripts/substitute.scm, guix/store.scm,
guix/store/deduplication.scm, guix/tests.scm, tests/base32.scm,
tests/builders.scm, tests/challenge.scm, tests/cpan.scm,
tests/crate.scm, tests/derivations.scm, tests/gem.scm,
tests/nar.scm, tests/opam.scm, tests/pki.scm,
tests/publish.scm, tests/pypi.scm, tests/store-deduplication.scm,
tests/store.scm, tests/substitute.scm: Adjust imports.
* gnu/system/vm.scm: Likewise.
(guile-sqlite3&co): Rename to...
(gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT.
(expression->derivation-in-linux-vm)[config]: Remove.
(iso9660-image)[config]: Remove.
(qemu-image)[config]: Remove.
(system-docker-image)[config]: Remove.
* guix/scripts/pack.scm: Adjust imports.
(guile-sqlite3&co): Rename to...
(gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT.
(self-contained-tarball)[build]: Call 'make-config.scm' without
#:libgcrypt argument.
(squashfs-image)[libgcrypt]: Remove.
[build]: Call 'make-config.scm' without #:libgcrypt.
(docker-image)[config, json]: Remove.
[build]: Add GUILE-GCRYPT to the extensions Remove (guix config) from
the imported modules.
* guix/self.scm (specification->package): Remove "libgcrypt", add
"guile-gcrypt".
(compiled-guix): Remove #:libgcrypt.
[guile-gcrypt]: New variable.
[dependencies]: Add it.
[*core-modules*]: Remove #:libgcrypt from 'make-config.scm' call.
Add #:extensions.
[*config*]: Remove #:libgcrypt from 'make-config.scm' call.
(%dependency-variables): Remove %libgcrypt.
(make-config.scm): Remove #:libgcrypt.
* build-aux/build-self.scm (guile-gcrypt): New variable.
(make-config.scm): Remove #:libgcrypt.
(build-program)[fake-gcrypt-hash]: New variable.
Add (gcrypt hash) to the imported modules. Adjust load path
assignments.
* gnu/packages/package-management.scm (guix)[propagated-inputs]: Add
GUILE-GCRYPT.
[arguments]: In 'wrap-program' phase, add GUILE-GCRYPT to the search
path.
| Ludovic Courtès |
