| Age | Commit message (Collapse) | Author |
|---|
|
This is a follow-up to commit 86afaadb51 ("system: Add 'nss-certs' to
%base-packages-networking.")
* doc/guix-cookbook.texi (Running Guix on a Linode Server): Remove nss-certs
from operating system's packages field.
(Running Guix on a Kimsufi Server): Likewise.
* doc/guix.texi (Using the Configuration System): Likewise.
(X.509 Certificates): Adjust to mention nss-certs *is* part of %base-packages.
* gnu/installer/services.scm (%system-services): Remove recommendation to
install nss-certs.
* gnu/system/examples/bare-bones.tmpl (host-name): Remove obsolete comments.
* gnu/system/examples/desktop.tmpl (packages): Remove nss-certs.
* gnu/system/examples/lightweight-desktop.tmpl (packages): Likewise.
* gnu/system/examples/plasma.tmpl (packages): Likewise.
* gnu/system/examples/raspberry-pi-64-nfs-root.tmpl (packages): Likewise.
* gnu/system/examples/raspberry-pi-64.tmpl (packages): Likewise.
* gnu/system/examples/vm-image.tmpl (packages): Likewise.
* gnu/system/images/orangepi-r1-plus-lts-rk3328.scm (packages): Likewise.
* gnu/system/images/pine64.scm (packages): Likewise.
* gnu/system/install.scm (installation-os) [packages]: Likewise.
Change-Id: If09123a69b987178bcb0aab61c4570c14fc1286f
|
|
The aim here is to improve the user experience. There's anecdotal evidence
that the network performance for bordeaux is better compared to ci at least
for some users, and I don't know of any issues with rate limiting or access
restriction for bordeaux compared to ci. It also has IPv6 support.
Additionally, bordeaux generally had more substitutes than ci, particularly
for aarch64-linux and armhf-linux. This change will offer a very slight
speedup for those substitutes that only bordeaux has.
Bordeaux has been a default substitute server for nearly 3 years now and I
think this change is overdue. I'm also hopeful that we'll be able to build on
the testing regarding mirrors for bordeaux, and that'll allow potentially
improving the hosting setup (through providing more redundancy) and further
improving substitute fetching for users who currently have issues with
substitute access.
* config-daemon.ac: Switch substitute urls order.
* doc/guix.texi: Ditto.
* etc/guix-install.sh: Ditto.
* gnu/installer/newt/network.scm (wait-service-online): Ditto.
* guix/store.scm (%default-substitute-urls): Ditto.
Change-Id: I4f6d93ae1fc8b03d80b47b18b5749a51f1fde17b
Signed-off-by: Christopher Baines <mail@cbaines.net>
|
|
Partially-Fixes: <https://issues.guix.gnu.org/64006>
* gnu/installer/services.scm (system-services->configuration): When the
LANGUAGE environment variable matches a known native console font, wrap the
base services with modify-services, configuring console-font-service-type to
set the native console font on every tty instead of the default console font.
Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>
|
|
* gnu/installer/locale.scm (supported-locales->locales): Filter out C.UTF-8. It
doesn't follow the other locales' format, and doesn't have a corresponding
iso639 code.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
|
|
Previously, db.sqlite-{wal,shm} could be left behind after stopping
guix-daemon. When resuming installation, SQLite could end up behaving
as if transactions visible in the WAL file had been committed, in spite
of having restored SAVED-DATABASE.
Fixes <https://issues.guix.gnu.org/59784>.
Reported by pelzflorian (Florian Pelz) <pelzflorian@pelzflorian.de>.
* gnu/installer/final.scm (install-system): Before restarting
guix-daemon, delete db.sqlite-{wal,shm}.
|
|
As part of fixing <https://issues.guix.gnu.org/59784>, make sure
/var/guix/db.sqlite is only copied while guix-daemon is stopped.
* gnu/installer/final.scm (call-with-mnt-container): Add FIXME comment.
(install-system): Copy DATABASE-FILE and SAVED-DATABASE only when
'guix-daemon' is stopped. Add logging lines.
|
|
Fixes: <https://issues.guix.gnu.org/59823>
* gnu/installer/parted.scm (mapped-device?,
mapped-device-parent-partition): New procedures.
(eligible-devices): Detect mapped installation devices using the new
procedures.
|
|
Fixes <https://issues.guix.gnu.org/59922>.
Previously progress bars and related things would be buffered by
'run-external-command-with-line-hooks' until \n is read.
* gnu/installer/utils.scm (run-external-command-with-line-hooks): Use
'read-delimited' rather than 'get-line'. Pass 'concat as the last
argument.
(%display-line-hook): Remove.
(run-command): Use 'display' instead of '%display-line-hook'.
(%syslog-line-hook): Add "\n" when LINE doesn't end in \n.
(%installer-log-line-hook): Do not add an extra newline.
(installer-log-line): Add an extra newline.
|
|
* gnu/installer/services.scm (system-services->configuration): Add
heading above the 'packages' field. Rename 'heading' to
'service-heading'.
|
|
* gnu/installer/hardware.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer.scm (installer-steps): Pass #:pci-database to the
'welcome' step procedure.
* gnu/installer/newt.scm (welcome-page): Add #:pci-database and pass it
to 'run-welcome-page'.
* gnu/installer/newt/welcome.scm (check-hardware-support): Add #:pci-database.
Enumerate unsupported PCI devices and run an error page when unsupported
devices are found.
(run-welcome-page): Add #:pci-database and pass it to
'check-hardware-support' and to the recursive call.
* gnu/installer/record.scm (<installer>)[welcome-page]: Adjust comment.
* doc/guix.texi (Hardware Considerations): Mention it.
|
|
* gnu/installer/newt/page.scm (run-error-page): Add #:width and honor
it.
|
|
This is a followup to 682639c107908426fe6bf0a1b8404b98b7820290, which
added the uvesafb upfront, before welcome page had been displayed.
* gnu/installer/newt/welcome.scm (check-hardware-support): New
procedure.
(run-welcome-page): Use it.
|
|
* gnu/installer/newt.scm (newt-run-command): Remove
'displayed-command'.
|
|
When the user aborts the installation because a core dump is discovered or the
installation command failed, displaying the abort backtrace doesn't make much
sense. Hide it when the abort condition is &user-abort-error and skip directly
to the dump page.
* gnu/installer/steps.scm (&user-abort-error): New variable.
(user-abort-error?): New procedure.
* gnu/installer/newt/final.scm (run-install-failed-page): Raise a
user-abort-error.
* gnu/installer/newt/welcome.scm (run-welcome-page): Ditto.
* gnu/installer.scm (installer-program): Hide the backtrace page and directly
propose to dump the report when the a &user-abort-error is raised.
|
|
Fixes: <https://issues.guix.gnu.org/58733>
* gnu/installer.scm (installer-program): Enable core dump generation.
* gnu/installer/dump.scm (%core-dump): New variable.
(prepare-dump): Copy the core dump file.
* gnu/installer/newt/welcome.scm (run-welcome-page): Propose to report an
installation that previously generated a core dump.
|
|
Fixes: <https://issues.guix.gnu.org/53541>.
* gnu/installer/parted.scm (read-partition-uuid/retry): New procedure.
(check-user-partitions): Use it.
|
|
There will be false positives: Because the Guix installer uses the
kernel argument modprobe.blacklist=radeon,amdgpu and some AMD graphics
actually work okay according to h-node, these users will get a
false alarm.
* gnu/installer/newt/welcome.scm (run-welcome-page): Warn before showing
the welcome page.
|
|
Fixes: <https://issues.guix.gnu.org/58734>
* gnu/installer/newt.scm (exit-error): Resume it.
|
|
This is a follow-up of: <https://issues.guix.gnu.org/57232>
* gnu/installer/newt/partition.scm (run-label-page): Add a confirmation page
when dealing with an EFI installation.
|
|
* gnu/installer/newt/final.scm (run-install-failed-page): Add a "Report the
failure" button.
|
|
Fixes: <https://issues.guix.gnu.org/55360>
* gnu/installer/utils.scm (run-external-command-with-handler/tty): New
procedure.
(run-external-command-with-line-hooks, run-command): Add a TTY? argument.
* gnu/installer/final.scm (install-system): Call run-command with TTY?
argument set to #true.
|
|
* gnu/installer/newt/network.scm (wait-service-online): Factorize url-alive?
in internet check.
|
|
Checks the availability of the mirror bordeaux.guix.gnu.org in addition to
ci.guix.gnu.org. This allows to proceed the installation if the
ci.guix.gnu.org is unavailable.
* gnu/installer/newt/network.scm (wait-service-online): Relax internet check
availability criteria.
Signed-off-by: Andrew Tropin <andrew@trop.in>
|
|
These typos were found and reported through weblate.
* gnu/packages/audio.scm (wildmidi)[description]: Fix typo.
* gnu/packages/games.scm (cgoban)[description]: Fix typo.
* gnu/services/version-control.scm (gitolite-service-type)[description]:
Fix typo.
* gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full
stop at end of title.
* gnu/machine/ssh.scm (machine-ssh-configuration-system): Move
punctuation outside of quotes.
* guix/scripts/home.scm (process-action): Remove trailing space before
newline.
* guix/scripts/system.scm (show-help): Fix typo.
* guix/scripts/environment.scm (with-store/maybe): Fix typo.
|
|
Fixes: <https://issues.guix.gnu.org/57232>.
* gnu/installer/newt/partition.scm (run-label-confirmation-page): New
procedure.
(run-label-page): Call the above procedure before proceeding.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
* gnu/installer/tests.scm (edit-configuration-file): Fix it.
|
|
When the configuration is edited, it looks like there are some leftover
fragments from the input configuration:
Example content of config.scm after edition:
#:imported-modules
'((gnu services herd)
(guix build utils)
(guix combinators)))
unted". The unique
;; file system identifiers there ("UUIDs") can be obtained
;; by running 'blkid' in a terminal.
...
This is strange because call-with-output-file uses the O_TRUNC flag which
resets the file size to zero. Remove the configuration file before writing it
as a work-around.
* gnu/installer/tests.scm (edit-configuration-file): Remove the configuration
file before re-writing it.
|
|
* gnu/installer/newt/services.scm (run-console-services-cbt-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
Partially-Fixes: <https://issues.guix.gnu.org/57983>
* gnu/installer/parted.scm (luks-ensure-open): New procedure.
(unmount-user-partitions): Ensure luks devices are open.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
* gnu/installer/newt/partition.scm (run-partitioning-page): Do it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
* gnu/installer/user.scm (<secret>, secret?, make-secret, secret-content): Move
to utils.scm.
* gnu/installer/utils.scm (<secret>, secret?, make-secret, secret-content):
Moved from user.scm.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Make password a
<secret>.
* gnu/installer/parted.scm (luks-format-and-open): Unwrap secret.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
* gnu/installer/parted.scm (auto-partition!): Avoid removing logical
partitions twice.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
