| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This makes powerpc64le-linux a supported architecture for Guix, but not for
Guix System.
* Makefile.am (SUPPORTED_SYSTEMS): Add an entry for powerpc64le-linux.
* etc/guix-install.sh (chk_sys_arch): Same.
* guix/packages.scm (%supported-systems): Same.
* m4/guix.m4 (GUIX_ASSERT_SUPPORTED_SYSTEM): Same.
* tests/guix-build.sh (all_systems): Same.
|
|
Fixes <https://bugs.gnu.org/47256>.
Reported by Léo Le Bouter <lle-bout@zaclys.net>.
* guix/gnu-maintenance.scm (%tarball-rx, %package-name-rx): Accept
underscore as the package/version separator in tarball names.
* tests/gnu-maintenance.scm ("release-file?"): Add "mediainfo" test.
|
|
Otherwise, the test crashes (not fails) when run in `guix environment --pure guix`.
Fixes <https://bugs.gnu.org/46445>.
* tests/store.scm (%shell): Fallback to "/bin/sh".
|
|
This follows up on commit c05ceaf2b650d090cf39a048193505cb4e6bd257.
* tests/lint.scm: Remove comment.
Reported by morgansmith in #guix.
|
|
* guix/import/go.scm (vcs-file?, file-hash, git-checkout-hash): New
procedures.
(vcs->origin): Use 'git-checkout-hash' in the 'git case.
|
|
This patch adds a 'guix import go' command.
* doc/guix.texi (Requirements): Mention Guile-Lib dependency.
(Invoking guix import): Document 'guix import go'.
* gnu/packages/package-management.scm (guix)[inputs, propagated-inputs]:
Add GUILE-LIB.
* guix/self.scm (compiled-guix)[guile-lib]: New variable.
[dependencies]: Add it.
(specification->package): Add "guile-lib".
* guix/build-system/go.scm (go-version->git-ref): New procedure.
* guix/import/go.scm, guix/scripts/import/go.scm, tests/go.scm: New files.
* guix/scripts/import.scm: Declare subcommand guix import go
* po/guix/POTFILES.in: Add 'guix/scripts/import/go.scm'.
* Makefile.am (MODULES): Add 'guix/import/go.scm' and
'guix/scripts/import/go.scm'.
(SCM_TESTS): Add 'tests/go.scm'.
Co-Authored-By: Helio Machado <0x2b3bfa0@gmail.com>
Co-Authored-By: Francois Joulaud <francois.joulaud@radiofrance.com>
Co-Authored-By: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Co-Authored-by: Ludovic Courtès <ludo@gnu.org>
|
|
Previously, test cases could fail if some process was listening
at a hard-coded port. This patch eliminates most of these potential
failures, by automatically assigning an unbound port. This should
allow for building multiple guix trees in parallel outside a build
container, though this is currently untested.
The test "home-page: Connection refused" in tests/lint.scm still
hardcodes port 9999, however.
* guix/tests/http.scm
(http-server-can-listen?): remove now unused procedure.
(%http-server-port): default to port 0, meaning the OS
will automatically choose a port.
(open-http-server-socket): remove the false statement claiming
this procedure is exported and also return the allocated port
number.
(%local-url): raise an error if the port is obviously unbound.
(call-with-http-server): set %http-server-port to the allocated
port while the thunk is called.
* tests/derivations.scm: adjust test cases to use automatically
assign a port. As there is no risk of a port conflict now,
do not make any tests conditional upon 'http-server-can-listen?'
anymore.
* tests/elpa.scm: likewise.
* tests/lint.scm: likewise, and add a TODO comment about a port
that is still hard-coded.
* tests/texlive.scm: likewise.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
|
|
|
|
Previously, transformations applied from a manifest (rather than via
"guix install") would be lost. This change fixes that and simplifies
things.
Reported by zimoun at
<https://lists.gnu.org/archive/html/guix-devel/2021-02/msg00153.html>.
* guix/profiles.scm (default-properties): New procedure.
(package->manifest-entry): Use it for #:properties.
* guix/scripts/pack.scm (guix-pack)[with-transformations]: Remove.
Remove caller.
* guix/scripts/package.scm (transaction-upgrade-entry): Remove calls to
'manifest-entry-with-transformations'.
* tests/guix-package.sh: Add test.
* tests/transformations.scm ("options->transformation + package->manifest-entry"):
New test.
|
|
Fixes a regression introduced in
c6d6aee6659acb293eb33f498fdac3b47a19a48, where #:reference-graphs would
end up referring to native inputs.
This would notably break the compilation of systems using a childhurd,
because they would attempt to build the 'hurd' package natively.
* guix/gexp.scm (lower-reference-graphs)[tuple->gexp-input]: Honor TARGET.
* tests/gexp.scm ("gexp->derivation #:references-graphs cross-compilation"):
New test.
|
|
* guix/build/syscalls.scm (<mount>): New record type.
(option-string->mount-flags, mount-flags)
(octal-decode, mounts): New procedures.
(mount-points): Rewrite in terms of 'mount'.
* tests/syscalls.scm ("mounts"): New test.
|
|
* guix/gexp.scm (lower-inputs, gexp->sexp): Change keyword parameters to
positional parameters. Adjust callers accordingly.
* tests/gexp.scm (gexp->sexp*, "gexp->file"): Adjust accordingly.
|
|
This avoids double traversal of references and extra bookkeeping,
thereby further reducing memory allocations.
* guix/gexp.scm (lower-gexp): Include only one call to 'lower-inputs'.
(gexp-inputs): Remove #:native? parameter.
[set-gexp-input-native?]: New procedure.
[add-reference-inputs]: Use it.
(gexp-native-inputs): Remove.
* tests/gexp.scm (gexp-native-inputs): Remove.
(gexp-input->tuple): Include 'gexp-input-native?'.
("let-system")
("let-system, nested")
("ungexp + ungexp-native")
("ungexp + ungexp-native, nested")
("ungexp + ungexp-native, nested, special mixture")
("input list")
("input list + ungexp-native")
("input list splicing")
("input list splicing + ungexp-native-splicing")
("gexp list splicing + ungexp-splicing"): Adjust accordingly.
|
|
This slightly reduces memory allocation.
* guix/gexp.scm (lower-inputs): Expect a list of <gexp-input> rather
than a list of tuples.
(lower-reference-graphs)[tuple->gexp-input]: New procedure.
Use it.
(gexp-inputs): Return a list of <gexp-input> rather than a list of
tuples.
* tests/gexp.scm (gexp-input->tuple): New procedure.
("one input package")
("one input package, dotted list")
("one input origin")
("one local file")
("one local file, symlink")
("one plain file")
("two input packages, one derivation, one file")
("file-append")
("file-append, output")
("file-append, nested")
("let-system")
("let-system, nested")
("ungexp + ungexp-native")
("ungexp + ungexp-native, nested")
("ungexp + ungexp-native, nested, special mixture")
("input list")
("input list + ungexp-native")
("input list splicing")
("input list splicing + ungexp-native-splicing")
("gexp list splicing + ungexp-splicing"): Adjust accordingly.
|
|
Fixes <https://bugs.gnu.org/46390>.
Reported by zimoun <zimon.toutoune@gmail.com>.
This is similar to the fix in d10474c38d58bdc676e64336769dc2e00cdfa8ed.
* guix/packages.scm (package-field-location): Handle FILE not in %LOAD-PATH.
* tests/guix-lint.sh: Add test.
|
|
* guix/scripts/system.scm (system-derivation-for-action): Replace "os"
argument by "image". Remove "image-size", "image-type", "label" and
"volatile-root?" arguments.
(perform-action): Ditto.
(process-action): Construct the <image> record and pass it to "perform-action"
procedure.
* tests/guix-system.sh: Adapt accordingly.
* gnu/system/images/hurd.scm: Return the default image.
* gnu/system/images/novena.scm: Ditto.
* gnu/system/images/pine64.scm: Ditto.
* gnu/system/images/pinebook-pro.scm Ditto.
|
|
Remove the 'vm-image' command that has been superseded by the 'image'
command.
* gnu/system/vm.scm (system-qemu-image): Remove it.
* guix/scripts/system.scm (system-derivation-for-action): Mark 'vm-image'
command as deprecated and use the image API to produce the VM image.
(perform-action, show-help): Adapt accordingly.
* tests/guix-system.sh: Ditto.
* doc/guix.texi (Invoking guix system,
Running Guix in a VM): Ditto.
* etc/completion/fish/guix.fish: Ditto.
* etc/completion/zsh/_guix: Ditto.
|
|
* gnu/services/file-sharing.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* po/packages/POTFILES.in: Add it.
* tests/services/file-sharing.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* doc/guix.texi (File-Sharing Services): New section.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
|
|
|
|
* guix/utils.scm (string-distance): New procedure.
(string-closest): New procedure.
* tests/utils.scm ("string-distance", "string-closest"): New tests.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
|
|
|
|
Add a new phase validating the usability of installed Python packages.
* gnu/packages/aux-files/python/sanity-check.py: New file.
* Makefile.am (AUX_FILES): Register it.
* guix/build-system/python.scm (sanity-check.py): New variable.
(lower): Add the script as an implicit input.
* guix/build/python-build-system.scm: Remove trailing #t.
(sanity-check): New phase.
(%standard-phases): Use it.
* tests/builders.scm: (make-python-dummy)
(dummy-ok, dummy-dummy-nosetuptools, dummy-fail-requirements)
(dummy-fail-import, dummy-fail-console-script): New variables.
("python-build-system: dummy-ok")
("python-build-system: dummy-dummy-nosetuptools")
("python-build-system: dummy-fail-requirements")
("python-build-system: dummy-fail-import")
("python-build-system: dummy-fail-console-script"): Add tests.
|
|
* guix/scripts/package.scm (export-manifest): New procedure.
(show-help, %options): Add '--export-manifest'.
(process-query): Honor it.
* guix/build/profiles.scm (build-profile): Mention it.
* tests/guix-package.sh: Test it.
* doc/guix.texi (Invoking guix package): Document it.
|
|
* guix/utils.scm (version-unique-prefix): New procedure.
* tests/utils.scm ("version-unique-prefix"): New test.
|
|
* guix/profiles.scm (manifest->code): New procedure.
* tests/profiles.scm ("manifest->code, simple")
("manifest->code, simple, versions")
("manifest->code, transformations"): New tests.
|
|
This test goes from 58s to 10s wall-clock time.
Reported by Maxim Cournoyer <maxim.cournoyer@gmail.com>.
* tests/packages.scm ("fold-available-packages with/without cache"):
Remove 'find-duplicates'. Add 'list->set*' and use it instead of
'find-duplicates', 'delete-duplicates', and 'lset='.
|
|
* guix/store/database.scm (assert-integer): New procedure.
(update-or-insert): Use it to validate NAR-SIZE and TIME.
* tests/store-database.scm ("sqlite-register with incorrect size"): New
test.
|
|
* tests/guix-system.sh: Test 'guix system extension-graph' and 'guix
system shepherd-graph'.
|
|
Before this change, only plain directories, tar or zip archives were supported
as the source of a package for the GNU build system; anything else would cause
the unpack phase to fail. Origins relying on snippets would suffer from the
same problem.
This change adds the support to use files of the following extensions: .gz,
.Z, .bz2, .lz, and .xz, even when they are not tarballs. Files of unknown
extensions are treated as uncompressed files and supported as well.
* guix/packages.scm (patch-and-repack): Only add the compressor utility to the
PATH when the file is compressed. Bind more inputs in the mlet, and use them
for decompressing single files. Adjust the decompression and compression
routines.
[decompression-type]: Remove nested variable.
* guix/build/utils.scm (compressor, tarball?): New procedures. Move
%xz-parallel-args to the new 'compression helpers' section.
* tests/packages.scm: Add tests. Add missing copyright year for Jan.
* guix/build/gnu-build-system.scm (first-subdirectory): Return #f when no
sub-directory was found.
(unpack): Support more file types, including uncompressed plain files.
|
|
* guix/serialization.scm (read-string-pairs): New procedure.
* guix/store.scm (read-arg): Add support for 'string-pairs'.
(find-roots): New procedure.
* tests/store.scm ("add-indirect-root and find-roots"): New test.
|
|
* tests/swh.scm (%origin): Change "visits_url" to "origin_visits_url".
(%visits): New variable.
("origin-visit, no snapshots"): New test.
|
|
The 'stack' variable could be #f when code is interpreted, which in
practice happens when running in "legacy" mode--i.e., when
'open-inferior' invokes "guile" instead of "guix repl".
* guix/repl.scm (send-repl-response)[handle-exception]: Check whether
STACK is true before passing it to 'stack->frames'.
* tests/inferior.scm ("&inferior-exception, legacy mode"): New test.
|
|
* tests/inferior.scm ("inferior-eval-with-store, exception")
("inferior-eval-with-store, not a procedure"): New tests.
|
|
* guix/upstream.scm (upstream-source-compiler): New procedure.
(%updaters): Set! it.
* guix/transformations.scm (transform-package-latest): New procedure.
(%transformations): Add 'with-latest'.
(%transformation-options, show-transformation-options-help/detailed):
Add '--with-latest'.
* tests/transformations.scm ("options->transformation, with-latest"):
New test.
* doc/guix.texi (Package Transformation Options): Document it.
|
|
The path normalization of `--root` option of `guix environment` was
buggy as it appended full argument after normalized directory. This
patch fixes it.
* guix/scripts/environment.scm (register-gc-root): Fix gc-root path
normalization.
* tests/guix-environment.sh: Add test.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
|
|
* guix/scripts/system.scm (system-derivation-for-action): Rename 'disk-image'
command 'image'. Warn when using the now deprecated 'disk-image' command.
(show-help): Adapt accordingly.
(guix-system): Ditto.
* tests/guix-system.sh: Ditto.
* gnu/system/examples/bare-hurd.tmpl: Ditto.
* doc/guix.texi (Building the Installation Image,
Building the Installation Image for ARM Boards,
Invoking guix pack,
Invoking guix system): Adapt documentation.
|
|
* gnu/services/networking.scm (openntpd-configuration): Remove
"allow-large-adjustment?" field.
(openntpd-shepherd-service): Remove use of "allow-large-adjustment?"
configuration field and "-s" daemon option.
* tests/networking.scm (%openntpd-conf-sample): Remove
"allow-large-adjustment?" field.
* doc/guix.texi (Networking Services)[openntpd-service-type]: Remove
"allow-large-adjustment?" field from sample configuration.
[openntpd-configuration]: Remove description of "allow-large-adjustment?"
field.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
|
|
This separation between the code for dealing with narinfos from the code doing
that for a purpose should make things clearer, and better support components
other that the substitute script in using this code.
This is just moving the code around, no code should have been significantly
changed.
* guix/scripts/substitute.scm (<narinfo>): Move record type to (guix narinfo).
(fields->alist, narinfo-hash-algorithm+value, narinfo-hash->sha256,
narinfo-signature->canonical-sexp, narinfo-maker, read-narinfo,
narinfo-sha256, valid-narinfo?, write-narinfo, narinfo->string,
string->narinfo, equivalent-narinfo?, supported-compression?,
compresses-better?, narinfo-best-uri): Move procedures to (guix narinfo).
(%compression-methods): Move variable to (guix narinfo).
* guix/narinfo.scm: New file.
* Makefile.am (MODULES): Add it.
* po/guix/POTFILES.in: Add 'guix/narinfo.scm'.
|
|
Conflicts:
gnu/local.mk
gnu/packages/cmake.scm
gnu/packages/curl.scm
gnu/packages/gl.scm
gnu/packages/glib.scm
gnu/packages/guile.scm
gnu/packages/node.scm
gnu/packages/openldap.scm
gnu/packages/package-management.scm
gnu/packages/python-xyz.scm
gnu/packages/python.scm
gnu/packages/tls.scm
gnu/packages/vpn.scm
gnu/packages/xorg.scm
|
|
This issue is caught with Guile-JSON 4.4.1, but not by 4.3.2.
* tests/crate.scm (test-root-dependencies): Add missing comma.
|
|
* guix/scripts/publish.scm (compress-nar)[write-compressed-file]: New
procedure.
Use it for 'gzip' and 'lzip'. Add 'zstd.
(nar-response-port, string->compression-type): Add case for 'zstd'.
* tests/publish.scm (zstd-supported?): New procedure.
("/nar/zstd/*"): New test.
* doc/guix.texi (Invoking guix publish): Document zstd compression.
(Base Services): Add cross-reference to the above node.
|
|
* guix/utils.scm (lzip-port): Return a single value.
(zstd-port): New procedure.
(decompressed-port, compressed-output-port): Add 'zstd' case.
* tests/utils.scm (test-compression/decompression): Test 'zstd' when
the (zstd) module is available.
|
|
This procedure was unused except in one test.
* guix/utils.scm (compressed-port): Remove.
* tests/utils.scm (test-compression/decompression): Rewrite to use
'compressed-output-port' instead.
|
|
* gnu/services/shepherd.scm (shepherd-service-type): Require a
'description' form.
* gnu/services/base.scm (root-file-system-service-type)
(rngd-service-type, host-name-service-type):
(virtual-terminal-service-type, console-keymap-service-type)
(syslog-service-type, swap-service-type)
(kmscon-service-type): Add description.
* gnu/services/networking.scm (dhcp-client-service-type): Likewise.
* gnu/system/install.scm (cow-store-service-type): Likewise.
* gnu/system/linux-container.scm (dummy-networking-service-type):
Likewise.
* gnu/system/mapped-devices.scm (device-mapping-service-type):
Likewise.
* tests/guix-system.sh: Likewise.
|
|
Fixes <https://issues.guix.gnu.org/30116>.
Before this change, the presence of a NUL character on a line meant that
the (glibc) regexp engine used by Guile would either 1. stop scanning the
string or 2. crash with the error "string contains #\\nul character",
depending on the locale used.
This change works around this limitation by first replacing the NUL character
by an unused Unicode code point, doing the substitution, then reverting the
replacement.
* guix/build/utils.scm (unused-private-use-code-point)
(replace-char): New procedures.
(substitute): Make use of the above procedures to work around the NUL
character regexp engine limitation.
* tests/build-utils.scm: Add tests.
Co-authored-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
|
|
* guix/scripts/hash.scm (guix-hash): When 'recursive? is true, use
'open-hash-port' instead of 'open-sha256-port'.
* tests/guix-hash.sh: Add test for 'guix hash -r -H sha512'.
|
|
Suggested by Philippe Swartvagher <philippe.swartvagher@inria.fr>.
* guix/transformations.scm (transform-package-patches): New procedure.
(%transformations): Add it as 'with-patch'.
(%transformation-options, show-transformation-options-help/detailed):
Add '--with-patch'.
* tests/transformations.scm ("options->transformation, with-patch"): New
test.
* doc/guix.texi (Package Transformation Options): Document it.
|
|
Fixes <https://bugs.gnu.org/45453>.
* guix/import/utils.scm (alist->package): Find plain license names in (guix
licenses) first, and only fall back to SPDX names on error.
* tests/import-utils.scm ("alist->package with SPDX license name 1/2",
"alist->package with SPDX license name 2/2"): New tests.
|
|
* gnu/bootloader/grub.scm (grub-configuration-file): New parameter
store-crypto-devices.
[crypto-devices]: New helper function.
[builder]: Use crypto-devices.
* gnu/machine/ssh.scm (roll-back-managed-host): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%encrypted-root-not-boot-os): New os declaration.
(%encrypted-root-not-boot-installation-script): New script, whose contents
were initially taken from %encrypted-root-installation-script.
(%test-encrypted-root-not-boot-os): New test.
* gnu/system.scm (define-module): Export
operating-system-bootoader-crypto-devices and
boot-parameters-store-crypto-devices.
(<boot-parameters>): Add field store-crypto-devices.
(read-boot-parameters): Parse store-crypto-devices field.
[uuid-sexp->uuid]: New helper function extracted from
device-sexp->device.
(operating-system-bootloader-crypto-devices): New function.
(operating-system-bootcfg): Use
operating-system-bootloader-crypto-devices to provide its contents to
the bootloader configuration generation process.
(operating-system-boot-parameters): Add store-crypto-devices to the
generated boot-parameters.
(operating-system-boot-parameters-file): Likewise to the file with
the serialized structure.
* guix/scripts/system.scm (reinstall-bootloader): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* tests/boot-parameters.scm (%default-store-crypto-devices): New
variable.
(%grub-boot-parameters, test-read-boot-parameters): Use
%default-store-crypto-devices.
(tests store-crypto-devices): New tests.
|
